Ken Segler
Not Complete
Fork of
Nucleo_rtos
by 
ST
Diff: ezLCD405.h
- Revision:
- 77:cd59ac40b3be
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/ezLCD405.h Thu Jun 23 22:57:30 2016 +0000
@@ -0,0 +1,540 @@
+#ifndef _CMDCODES_H_
+#define _CMDCODES_H_
+
+
+
+#define SERIAL_IF 1
+#define SPI_IF 2
+
+
+// Color Definitions
+// R4 R3 R2 R1 | R0 G5 G4 G3 | G2 G1 G0 B4 | B3 B2 B1 B0
+#define RED_0 0x0800
+#define RED_1 0x1000
+#define RED_2 0x2000
+#define RED_3 0x4000
+#define RED_4 0x8000
+#define MAX_RED 0x1F
+#define CL_RED(x) (((uint16_t)x) << 11)
+
+#define GREEN_0 0x0020
+#define GREEN_1 0x0040
+#define GREEN_2 0x0080
+#define GREEN_3 0x0100
+#define GREEN_4 0x0200
+#define GREEN_5 0x0400
+#define MAX_GREEN 0x3F
+#define CL_GREEN(x) (((uint16_t)x) << 5)
+
+#define BLUE_0 0x0001
+#define BLUE_1 0x0002
+#define BLUE_2 0x0004
+#define BLUE_3 0x0008
+#define BLUE_4 0x0010
+#define MAX_BLUE 0x1F
+#define NAVY BLUE_4
+#define CL_BLUE(x) ((uint16_t)x)
+
+#define CL_GRAY(x) (CL_RED(x) | CL_GREEN((x << 1)) | CL_BLUE(x))
+
+#define RED CL_RED(MAX_RED)
+#define GREEN CL_GREEN(MAX_GREEN)
+#define BLUE CL_BLUE(MAX_BLUE)
+
+#define YELLOW (RED | GREEN)
+#define ORANGE (RED | CL_GREEN(MAX_GREEN >> 1))
+#define LIGHT_YELLOW (RED | CL_GREEN(0x3B) | CL_BLUE(0x19))
+#define WHITE (RED | GREEN | BLUE)
+#define BLACK 0x0000
+#define GRAY (CL_RED(MAX_RED >> 1) | CL_GREEN(MAX_GREEN >> 1) | CL_BLUE(MAX_BLUE >> 1))
+#define GOLD (GREEN_5 + GREEN_4 + GREEN_3 + RED)
+
+
+// ############################################################################
+// ## EZLCD COMMAND CODES ###################################################
+// ############################################################################
+
+#define EXMODE 0xFB
+#define STDMODE 0xFC
+#define GETSERIAL 0xFD
+#define SHOWSETTINGS 0xFE
+#define CALIBRATE 0xEF
+
+#define CLS 0x21
+#define LIGHT_ON 0x22
+#define LIGHT_OFF 0x23
+#define SET_COLOR 0x24
+#define SET_XY 0x25
+#define PLOT 0x26
+#define PLOT_XY 0x27
+#define LINE_TO_XY 0x28
+#define CIRCLE_R 0x29
+#define SCR_BMP 0x2A
+#define SELECT_FONT 0x2B
+#define PRINT_CHAR 0x2C
+#define PRINT_STRING 0x2D
+#define PUT_BITMAP 0x2E
+#define ARC 0x2F
+
+#define PIE 0x30
+
+#define SET_LAYER 0x31
+#define SET_COLORKEY 0x32
+#define SET_LAYERVISIBLE 0x33
+
+#define SET_BG_COLOR 0x34
+#define SAVE_POSITION 0x35
+#define RESTORE_POSITION 0x36
+#define CIRCLE_R_FILL 0x39
+#define PRINT_CHAR_BG 0x3C
+#define PRINT_STRING_BG 0x3D
+
+#define H_LINE 0x40
+#define V_LINE 0x41
+#define BOX 0x42
+#define BOX_FILL 0x43
+
+#define PICTURE_ROM 0x50
+#define PUT_ICON 0x57
+#define PUT_SF_ICON 0x58
+
+#define SET_X 0x5E
+// 1: x
+#define SET_Y 0x5F
+// 1: y
+
+#define FONT_NORTH 0x60
+#define FONT_EAST 0x61
+#define FONT_SOUTH 0x62
+#define FONT_WEST 0x63
+
+#define SET_XH 0x6E
+// 1: xh 2: xl
+
+#define SD_PUT_ICON 0x70
+// 1 - 64: NULL terminated path
+#define SD_FILE_OPEN 0x71
+// 1: File ID (1 to 255)
+// 2 - 65: NULL terminated path
+// Response:
+// 0: 0x3F
+// 1: 0 = Error, ID = Success
+#define SD_FILE_CLOSE 0x72
+// 1: File ID (1 to 255)
+#define SD_FILE_CLOSE_ALL 0x73
+#define SD_FILE_GET_SIZE 0x74
+// 1: File ID (1 to 255)
+// Response:
+// 0: 0x3D
+// 1-4: File Size (0 = Error)
+// or
+// 0: 0x3E - Error
+#define SD_FILE_READ 0x75
+// 1: File ID (1 to 255)
+// 2-5: Number of Bytes
+// Response:
+// 0: 0x3C
+// 1-n: Bytes Read
+// or
+// 0: 0x3E - Error
+#define SD_FILE_CREATE 0x76
+// 1: File ID (1 to 255)
+// 2 - 65: NULL terminated path
+// Response:
+// 0: 0x3F
+// 1: 0 = Error, ID = Success
+#define SD_SCREEN_CAPTURE 0x44
+// Response:
+// 0: 0x3B - Success
+// 0x3E - Error
+
+#define SD_FOLDER_CREATE 0x46
+// 1 - 64: NULL terminated path
+// Response:
+// 0: 0x3B - Success
+// 0x3E - Error
+#define SD_FOLDER_DELETE 0x4D
+// 1 - 64: NULL terminated path
+// Response:
+// 0: 0x3A - Success
+// 0x3E - Error
+#define SD_FORMAT 0x4F
+// 1 - 5: File system (FAT12, FAT16, FAT32)
+// Response:
+// 0: 0x3A - Success
+// 0x3E - Error
+#define SD_FILE_WRITE 0x77
+// 1: File ID (1 to 255)
+// 2-5: Number of Bytes (n)
+// 6-(n+5): Data to write
+// Response:
+// 0: 0x3B - Success
+// 0x3E - Error
+
+#define SD_SPACE_INFO 0x48
+// 1: What (1: Free Space, 2: Used Space, 3: in Bad Sectors, Other: Total Space
+// Response:
+// 0: 0x3D
+// 1-4: Space Info (0 = Error)
+// or
+// 0: 0x3E - Error
+
+#define SD_INSERTED 0x49
+// Response:
+// 0: 0x3D - Inserted
+// 0: 0x3E - Error
+
+#define SD_SIZE 0x78
+// Response:
+// 0: 0x3D
+// 1-4: SD Size (0 = Error)
+// or
+// 0: 0x3E - Error
+
+#define SD_FILE_LIST 0x79
+// 1 - 64: NULL terminated dir path
+// Response:
+// 0: 0x3A
+// 1 - whatever: NULL terminated dir string
+// Files separated by new_line
+// or
+// 0: 0x3E - Error
+
+#define SD_FIND_FIRST 0x4A
+// 1 - F_MAXLNAME: NULL terminated dir path
+// Response:
+// 0: 0x3A
+// 1 - whatever: NULL terminated string
+// or
+// 0: 0x3E - Error
+#define SD_FIND_NEXT 0x4B
+// Response:
+// 0: 0x3A
+// 1 - whatever: NULL terminated string
+// or
+// 0: 0x3E - Error
+
+#define SD_FILE_REWIND 0x7A
+// 1: File ID (1 to 255)
+// Response:
+// 0: 0x39 - Success
+// 0x3E - Error
+#define SD_FILE_TELL 0x7B
+// 1: File ID (1 to 255)
+// Response:
+// 0: 0x3D
+// 1-4: Position
+// or
+// 0: 0x3E - Error
+
+#define SD_FILE_SEEK 0x7C
+// 1: File ID (1 to 255)
+// 2-5: Signed Offset
+// 6: whence
+// SD_SEEK_SET 0 File beginning
+// SD_SEEK_CUR 1 Current file pointer position
+// SD_SEEK_END 2 End-of-file
+// Response:
+// 0: 0x39 - Success
+// 0x3E - Error
+#define SD_SEEK_SET 0 // File beginning
+#define SD_SEEK_CUR 1 // Current file pointer position
+#define SD_SEEK_END 2 // End-of-file
+
+#define SD_FILE_DELETE 0x7D
+// 1 - 64: NULL terminated path
+// Response:
+// 0: 0x3A - Success
+// 0x3E - Error
+
+#define SD_RAW_READ 0x7E
+// 1: 0xA5
+// 2-5: Address
+// 6-9: Length
+// Response:
+// 0: 0x3C
+// 1-n: Bytes Read
+// or
+// 0: 0x3E - Error
+
+#define SD_RAW_WRITE 0x7F
+// 1: 0xA5
+// 2-5: Address
+// 6-9: Length
+// 10-(n+9): Data to write
+// Response:
+// 0: 0x3B - Success
+// 0x3E - Error
+
+// TO DO in SD:
+// f_setattr
+// f_getattr
+
+#define LIGHT_BRIGHT 0x80
+#define PING 0x83
+// Response:
+// 0: 0x38
+#define SET_COLORH 0x84
+#define SET_XHY 0x85
+#define PLOT_XHY 0x87
+#define LINE_TO_XHY 0x88
+#define CIRCLE_RH 0x89
+#define PUT_COMPR_BMPH 0x8D // Not implemented
+#define ARCH 0x8F
+
+#define PIEH 0x90
+#define SET_BG_COLORH 0x94
+#define CIRCLE_RH_FILL 0x99
+#define PUT_BITMAPH 0x9E
+
+#define H_LINEH 0xA0
+#define BOXH 0xA2
+#define BOXH_FILL 0xA3
+
+// Touch
+#define BUTTON_DEF 0xB0
+// 1: ID
+// 2: State 0: None, 1: UP, 2: DN, 3: Disabled, 4: Non-Visible
+// 3: IconUP
+// 4: IconDN
+// 5: IconDis
+// 6: x0 MSB
+// 7: x0 LSB
+// 8: y0
+// 9: Width
+//10: Height
+#define BUTTON_STATE 0xB1
+// 1: ID
+// 2: State
+#define TOUCH_PROTOCOL 0xB2
+// 1: Protocoles on/off (coded in 8 bits)
+#define ALL_BUTTONS_UP 0xB3
+#define ERASE_ALL_BUTTONS 0xB4
+
+#define USB_DISABLE_RS232 0xC0
+#define USB_DISABLE_SPI 0xC1
+#define USB_ENABLE_RS232 0xC2
+#define USB_ENABLE_SPI 0xC3
+
+// ezNOW Buzzer
+#define EZNOW_BUZZER_OFF 0xD0
+#define EZNOW_BUZZER_ON 0xD1
+#define EZNOW_BUZZER_BEEP 0xD2
+// 1: Beep time [0.01s]
+
+// Serial EEPROM
+#define SE_BYTE_OUT 0xE0
+#define SE_BYTE_WR 0xE1
+#define SE_DATA_OUT 0xE2
+#define SE_WAIT_END 0xE3
+#define SE_ERASE_SECTOR 0xE4
+#define SE_BYTE_RD 0xE5
+#define SE_BULK_ERASE 0xE6
+#define SE_PROGRAM_PAGE 0xE7
+#define SE_READ_BAT 0xE8
+
+// AVR (ATmega8) Flash Programming
+#define AVR_PROG 0xF0
+// 1 - 15: password
+#define EZNOW_AVR_PROG 0xF3
+// 1: Speed
+// 2 - 16: password
+// The following AVR commands are available only
+// after AVR_PROG or EZNOW_AVR_PROG command has been received
+#define AVR_PROG_CMD 0xF1
+// 1 - 4: Bytes 1 - 4 of AVR Serial Programming Instruction
+#define AVR_PROG_CMD_FAST 0xF4
+// 1 - 4: Bytes 1 - 4 of AVR Serial Programming Instruction
+#define AVR_PROG_CMD_NO_DELAY 0xF6
+// 1 - 4: Bytes 1 - 4 of AVR Serial Programming Instruction
+#define AVR_PROG_CMDS_PACK 0xF7
+// 1 No of Prog commands
+// 2 - 257 (64*4-1) Prog commands (4 bytes each)
+#define AVR_WRITE_POLL 0xF8
+// 1 - Command
+// 2 - Address MSB
+// 3 - Address LSB
+// 4 - Data
+#define AVR_WRITE_PAGE 0xF2
+// 1: Page No
+// 2 - 65: Bytes 0 - 63 of the page
+#define AVR_SUCCESS 0xF5
+#define RESET_EZLCD 0xFA
+
+// ############################################################################
+// ## EZLCD OUTPUT CODES ####################################################
+// ############################################################################
+
+// Touch Screen Output
+#define ID_TOUCH_X 0x81
+#define ID_TOUCH_Y 0x82
+#define ID_TOUCH_PEN_UP 0x83
+//#define ID_CAL_TOUCH_X 0x84
+//#define ID_CAL_TOUCH_Y 0x85
+#define ID_BUTTON_DN 0x86
+#define ID_BUTTON_LEAVE 0x87
+
+#define EZLCD_READY 0xEA
+#define PONG 0x38
+
+// ############################################################################
+// ## OTHER DEFINITIONS #####################################################
+// ############################################################################
+
+#define STX 0x02
+#define ETX 0x03
+#define ACK 0x06
+#define NAK 0x15
+
+#define TOUCH_EZ_BUTTON 0x01
+#define TOUCH_CU_BUTTON 0x02
+#define TOUCH_CALIBRATED 0x40
+#define timedOut 0x2
+#define OUTLINE 1
+#define SHADOW 2
+
+class ezLCD4: public Stream
+{
+public:
+ /** Create a new interface to a ezLCD3xx display
+ * @param tx -- mbed transmit pin
+ * @param rx -- mbed receive pin
+ */
+ volatile uint8_t status;
+ volatile uint8_t pong;
+ volatile uint8_t button;
+ volatile uint8_t bState;
+ volatile uint16_t x,y;
+ ezLCD4(PinName tx, PinName rx);
+ /**
+ *
+ *
+ */
+ void Rx_interrupt( void );
+ void Tx_interrupt( void );
+ void send_line();
+ /**
+ *
+ *
+ */
+ uint8_t getByte( void );
+ uint8_t getCount( void );
+ void cls( void );
+ void cls( uint16_t color);
+ void lightON( void );
+ void lightOFF( void );
+ void lightBright( uint8_t bright );
+ void setTouchProtocol( uint8_t protocol);
+ uint16_t getX( void );
+ uint16_t getY( void );
+ void putSfIcon( uint8_t icon );
+
+ void vLine( uint8_t y);
+ void hLine( uint8_t x);
+ void hLineH( uint16_t x);
+ void setLayer ( uint8_t layer );
+ void setLayerVisible ( uint8_t layer, uint8_t visible );
+ void setColorKey ( uint16_t color );
+ void SDPutIcon( char *str );
+ void textDirection( uint8_t dir );
+ void buttonState( uint8_t ID, uint8_t state );
+ void buttonsDeleteAll( void );
+ void showSettings( void );
+ void buzzerOn( void );
+ void buzzerOff( void );
+ void lineTo( uint16_t x , uint16_t y );
+ void beep( uint8_t duration );
+ /**
+ *
+ *
+ */
+ void printString( char *str );
+ /**
+ *
+ *
+ */
+ void printString( uint16_t x, uint16_t y, uint8_t font, uint16_t color, char *str , uint8_t dir, uint8_t efx, uint16_t ocolor);
+ /**
+ *
+ *
+ */
+ void ezLCD405Init( uint8_t iface );
+ /**
+ *
+ *
+ */
+ void exmode( void );
+ /**
+ *
+ *
+ */
+ void stdmode( void );
+ /**
+ *
+ *
+ */
+ void setColor(uint16_t color);
+ /**
+ *
+ *
+ */
+ void setBgColor(uint16_t color);
+ /**
+ *
+ *
+ */
+ void setFont(unsigned char font);
+ /**
+ *
+ *
+ */
+ void direct( unsigned char c );
+ /**
+ *
+ *
+ */
+ void setXY( uint16_t x, uint16_t y);
+ /**
+ *
+ *
+ */
+ void box( uint16_t x, uint16_t y);
+ /**
+ *
+ *
+ */
+ void boxFill( uint16_t x, uint16_t y);
+ /**
+ *
+ *
+ */
+ void arc(uint16_t radius, uint16_t begin, uint16_t end);
+ /**
+ *
+ *
+ */
+ uint8_t createButton( uint8_t ID, uint8_t State, uint8_t IconUp, uint8_t IconDn, uint8_t IconDis, uint16_t X, uint16_t Y, uint16_t W, uint16_t H, uint8_t Callback);
+ /**
+ *
+ *
+ */
+ uint8_t pollTouch( uint8_t count , uint8_t cmd);
+ /**
+ *
+ *
+ */
+ uint8_t ping( uint16_t timeout );
+
+ void createTextBox( uint16_t x , uint16_t y, uint16_t w, uint16_t h, uint16_t bcolor, uint16_t fcolor, uint16_t tcolor, uint16_t fsize, uint8_t font, char *str);
+private:
+ Serial _ser;
+ virtual int _putc(int c);
+ virtual int _getc();
+ void send16MSB( uint16_t val );
+ void send16LSB( uint16_t val );
+ uint8_t writeData(uint8_t c);
+};
+
+
+
+#endif