![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
vr1.1
Dependencies: FreescaleIAP mbed-rtos mbed
Fork of CDMS_RTOS_v1_1 by
Diff: PL.cpp
- Revision:
- 9:7ff6d75cc09e
- Parent:
- 8:607ae92fa6af
- Child:
- 12:cb3ee1ac3638
diff -r 607ae92fa6af -r 7ff6d75cc09e PL.cpp --- a/PL.cpp Sat Jul 04 08:56:34 2015 +0000 +++ b/PL.cpp Sat Jul 04 09:44:31 2015 +0000 @@ -1,29 +1,305 @@ #include "mbed.h" #include "PL.h" #include "all_funcs.h" +#include "Flags.h" Serial sr(USBTX,USBRX); -SPISlave pl_spi(PTE18, PTE19, PTE17, PTE16 ); // mosi, miso, sclk, ssel --> using SPI1 -//SPISlave pl_spi(PTD6, PTD7, PTD5, PTD4 ); // mosi, miso, sclk, ssel --> using SPI1 -int payloadBins = 4; - void FCTN_PL_RCV_SC_DATA() { - sr.printf("in FCTN_PL_RCV_SC_DATA\r\n"); - uint8_t scienceRawPacket[payloadBins]; - for(int i=0; i<payloadBins;i++) + sr.printf("in FCTN_PL_RCV_SC_DATA\r\n"); + uint8_t scienceRawPacket[payloadBins]; + for(int i=0; i<payloadBins; i++) + { + while(!pl_spi.receive()); // blocking statement --> waiting for data from Payload + uint8_t v = pl_spi.read(); // Read byte from master + scienceRawPacket[i] = v; + } + // serial feedback + sr.printf("Packet recieved\r\r\n"); + for(int i=0; i<payloadBins; i++) + { + sr.printf("%0x\t",scienceRawPacket[i]); + scienceRawPacket[i] = 0; + } + sr.printf("\r\r\n"); +} + +void FCTN_PL_MAIN() +{ + pl_main_flags|=PL_MAIN_STATUS; + pl_main_flags&=~(PL_LOW_POWER); + pl_prev_state=pl_state; + if(pl_schedule==1) + { + pl_state=pl_schedule_TC; + } + else + { + if(pl_state==PL_SCIENCE) + { + pl_state= PL_HIBERNATE; + } + else + { + pl_state=pl_prev_state; + } + } + + switch(pl_state) + { + case PL_OFF: { - while(!pl_spi.receive()); // blocking statement --> waiting for data from Payload - uint8_t v = pl_spi.read(); // Read byte from master - scienceRawPacket[i] = v; + if(pl_prev_state!=PL_OFF) + { + sr.printf("Command SPEED DL to go to Standby State (I2C) \r\n"); + } + sr.printf("Power off SPEED\r\n"); + pl_status=PL_OFF; + sr.printf("Disable SRP_INTERVAL_COUNTER\r\n"); + pl_main_flags&=~(PL_MAIN_STATUS); + } + case PL_STANDBY: + { + if(power_level<0) + { + pl_main_flags|=PL_LOW_POWER; + if(pl_prev_state!=PL_OFF) + { + sr.printf("Command SPEED DL to go to Standby State (I2C) \r\n"); + } + sr.printf("Power off SPEED\r\n"); + pl_status=PL_OFF; + sr.printf("Disable SRP_INTERVAL_COUNTER\r\n"); + pl_main_flags&=~(PL_MAIN_STATUS); + } + else + { + if(pl_prev_state!=PL_OFF) + { + sr.printf("Command SPEED DL to go to Standby State (I2C) \r\n"); + sr.printf("Power OFF SPEED PMTs\r\n"); + if(I2C_acknowledgement==1) + { + pl_status=PL_STANDBY; + } + else + { + pl_status=PL_ERR_I2C; + } + sr.printf("Disable SRP_INTERVAL_COUNTER\r\n"); + pl_main_flags&=~(PL_MAIN_STATUS); + } + else + { + sr.printf("Power on SPPED DL\r\n"); + sr.printf("Command SPEED DL to go to Standby State (I2C) \r\n"); + if(I2C_acknowledgement==1) + { + pl_status=PL_STANDBY; + } + else + { + pl_status=PL_ERR_I2C; + } + sr.printf("Disable SRP_INTERVAL_COUNTER\r\n"); + pl_main_flags&=~(PL_MAIN_STATUS); + } + } } - // serial feedback - sr.printf("Packet recieved\r\r\n"); - for(int i=0;i<payloadBins;i++) + case PL_HIBERNATE: + { + if(power_level<1) + { + pl_main_flags|=PL_LOW_POWER; + if(power_level<0) + { + pl_main_flags|=PL_LOW_POWER; + if(pl_prev_state!=PL_OFF) + { + sr.printf("Command SPEED DL to go to Standby State (I2C) \r\n"); + } + sr.printf("Power off SPEED\r\n"); + pl_status=PL_OFF; + sr.printf("Disable SRP_INTERVAL_COUNTER\r\n"); + pl_main_flags&=~(PL_MAIN_STATUS); + } + else + { + if(pl_prev_state!=PL_OFF) + { + sr.printf("Command SPEED DL to go to Standby State (I2C) \r\n"); + sr.printf("Power OFF SPEED PMTs\r\n"); + if(I2C_acknowledgement==1) + { + pl_status=PL_STANDBY; + } + else + { + pl_status=PL_ERR_I2C; + } + sr.printf("Disable SRP_INTERVAL_COUNTER\r\n"); + pl_main_flags&=~(PL_MAIN_STATUS); + } + else + { + sr.printf("Power on SPPED DL\r\n"); + sr.printf("Command SPEED DL to go to Standby State (I2C) \r\n"); + if(I2C_acknowledgement==1) { + pl_status=PL_STANDBY; + } + else + { + pl_status=PL_ERR_I2C; + } + sr.printf("Disable SRP_INTERVAL_COUNTER\r\n"); + pl_main_flags&=~(PL_MAIN_STATUS); + } + } + } + if(power_level>1) + { + if(pl_prev_state==PL_OFF) + { + sr.printf("Power on SPEED DL\r\n"); + } + sr.printf("Power on Speed PMT with reduced Voltage\r\n"); + sr.printf("Command SPEED DL to go to Standby State (I2C) \r\n"); + if(I2C_acknowledgement==1) + { + pl_status=PL_HIBERNATE; + } + else + { + pl_status=PL_ERR_I2C; + } + sr.printf("Disable SRP_INTERVAL_COUNTER\r\n"); + pl_main_flags&=~(PL_MAIN_STATUS); + } + } + + case PL_SCIENCE: { - sr.printf("%0x\t",scienceRawPacket[i]); - scienceRawPacket[i] = 0; + + if(power_level<2) + { + if(power_level<1) + { + pl_main_flags|=PL_LOW_POWER; + if(power_level<0) + { + pl_main_flags|=PL_LOW_POWER; + if(pl_prev_state!=PL_OFF) + { + sr.printf("Command SPEED DL to go to Standby State (I2C) \r\n"); + } + sr.printf("Power off SPEED\r\n"); + pl_status=PL_OFF; + sr.printf("Disable SRP_INTERVAL_COUNTER\r\n"); + pl_main_flags&=~(PL_MAIN_STATUS); + } + else + { + if(pl_prev_state!=PL_OFF) + { + sr.printf("Command SPEED DL to go to Standby State (I2C) \r\n"); + sr.printf("Power OFF SPEED PMTs\r\n"); + if(I2C_acknowledgement==1) + { + pl_status=PL_STANDBY; + } + else + { + pl_status=PL_ERR_I2C; + } + sr.printf("Disable SRP_INTERVAL_COUNTER\r\n"); + pl_main_flags&=~(PL_MAIN_STATUS); + } + else + { + sr.printf("Power on SPPED DL\r\n"); + sr.printf("Command SPEED DL to go to Standby State (I2C) \r\n"); + if(I2C_acknowledgement==1) + { + pl_status=PL_STANDBY; + } + else + { + pl_status=PL_ERR_I2C; + } + sr.printf("Disable SRP_INTERVAL_COUNTER\r\n"); + pl_main_flags&=~(PL_MAIN_STATUS); + } + } + } + if(power_level>1) + { + if(pl_prev_state==PL_OFF) + { + sr.printf("Power on SPEED DL\r\n"); + } + sr.printf("Power on Speed PMT with reduced Voltage\r\n"); + sr.printf("Command SPEED DL to go to Standby State (I2C) \r\n"); + if(I2C_acknowledgement==1) + { + pl_status=PL_HIBERNATE; + } + else + { + pl_status=PL_ERR_I2C; + } + sr.printf("Disable SRP_INTERVAL_COUNTER\r\n"); + pl_main_flags&=~(PL_MAIN_STATUS); + } + } + if(power_level>2) + { + if(pl_prev_state==PL_SCIENCE) + { + pl_status=PL_SCIENCE; + pl_main_flags&=~(PL_MAIN_STATUS); + } + else if(pl_prev_state==PL_HIBERNATE) + { + sr.printf("Power on SPEED PMT with high voltage \r\n"); + sr.printf("Command SPEED DL to go to Standby State (I2C) \r\n"); + if(I2C_acknowledgement==1) + { + sr.printf("Enable SRP_INTERVAL_COUNTER\r\n"); + pl_status=PL_SCIENCE; + pl_main_flags&=~(PL_MAIN_STATUS); + } + else + { + pl_status=PL_ERR_I2C; + sr.printf("Disable SRP_INTERVAL_COUNTER\r\n"); + pl_main_flags&=~(PL_MAIN_STATUS); + } + } + else + + { + if(pl_prev_state==PL_OFF) + { + sr.printf("Power on SPEED DL\r\n"); + } + sr.printf("Power on Speed PMT with reduced Voltage\r\n"); + sr.printf("Command SPEED DL to go to Standby State (I2C) \r\n"); + if(I2C_acknowledgement==1) + { + pl_status=PL_HIBERNATE; + } + else + { + pl_status=PL_ERR_I2C; + } + sr.printf("Disable SRP_INTERVAL_COUNTER\r\n"); + pl_main_flags&=~(PL_MAIN_STATUS); + } + } + + } - sr.printf("\r\r\n"); + + } } \ No newline at end of file