chaithanya rss
for frequency correction testing
Dependencies: FreescaleIAP SimpleDMA mbed-rtos mbed
Fork of
CDMS_CODE
by 
shubham c
Diff: ThreadsAndFunctions.h
- Revision:
- 4:104dd82c99b8
- Parent:
- 3:6c81fc8834e2
- Child:
- 5:ab276a17ca07
diff -r 6c81fc8834e2 -r 104dd82c99b8 ThreadsAndFunctions.h
--- a/ThreadsAndFunctions.h Wed Dec 23 05:37:55 2015 +0000
+++ b/ThreadsAndFunctions.h Tue Dec 29 06:50:19 2015 +0000
@@ -58,6 +58,11 @@
}
void COM_MNG_TMTC_FUN(void const *args){
+ if( !(gFLAGS & COM_SESSION_FLAG) ){
+ gPC.puts("com session is flase\r\n");
+ gLEDR = 1;
+ gLEDG = 1;
+ }
while(true){
Thread::signal_wait( COM_MNG_TMTC_SIGNAL_UART_INT );
if( gFLAGS & UART_INT_FLAG ){
@@ -69,82 +74,128 @@
gFLAGS = gFLAGS | COM_RX_FLAG;
PUT_RAW_BYTE;
// PENDING : MEASURE RSSI
+ if( gFLAGS & COM_SESSION_FLAG ){
+ gLEDR = 0;
+ gLEDG = 0;
+ }
}
else if( gFLAGS & COM_RX_FLAG ){
+ gLEDR = 0;
+ gLEDG = 1;
PUT_RAW_BYTE;
}
else{
+ gLEDR = 1;
+ gLEDG = 0;
gFLAGS = gFLAGS | COM_RX_FLAG;
PUT_RAW_BYTE;
}
}
- else if( (gFLAGS & NEW_TC_RECEIVED) && (gFLAGS & COM_MNG_TMTC_RUNNING_FLAG) ){
+ else if( gFLAGS & NEW_TC_RECEIVED ){
+ gPC.puts("NEW TC RECEIVED\r\n");
gFLAGS = gFLAGS & (~NEW_TC_RECEIVED);
gFLAGS = gFLAGS & (~COM_RX_FLAG);
+ gFLAGS = gFLAGS | COM_MNG_TMTC_RUNNING_FLAG;
// DISABLE THE RX1M INTERRUPT
RX1M.attach(NULL);
+ // VERIFY CRC, REPEATED PSC AND UPDATE TOTAL_VALID_TC, INCORRECT SIZE TC, CRC FAIL TC
while(gRX_COUNT < (RX_BUFFER_LENGTH)){
gRX_CURRENT_DATA_NODE->values[gRX_COUNT] = 0x00;
++gRX_COUNT;
}
gRX_COUNT = 0;
+ raw_data_to_tc();
- // VERIFY CRC, REPEATED PSC AND UPDATE TOTAL_VALID_TC, INCORRECT SIZE TC, CRC FAIL TC
- raw_data_to_tc();
if( gTOTAL_VALID_TC > 0 ){
- // CHECK WEATHER TC LIST HAS MISSING TC OR WEATHER LAST FRAME BIT IS HIGH IN THE LAST PSC-TC
- uint8_t tempContinue = 0xFF;
- continueToExecute(tempContinue);
- if(tempContinue == 0x00){
- // CHECK WEATHER GS VERIFICATION CODE MATCHES
- uint8_t tempGSver = 0x00;
- GScodeVerification(tempGSver);
- if( tempGSver ){
- gFLAGS = gFLAGS | COM_SESSION_VALIDITY;
- // PENDING : COM_POWER_ON_TX
- EXECUTE_OBOSC_ONLY;
- EXECUTE_TC;
+ gPC.printf("valid TC rx: %u\r\n", gTOTAL_VALID_TC);
+ if( gTOTAL_VALID_TC < COM_MAX_TC_LIMIT ){
+ // CHECK WEATHER TC LIST HAS MISSING TC OR WEATHER LAST FRAME BIT IS HIGH IN THE LAST PSC-TC
+ gPC.puts("checking for tc list complete\r\n");
+ uint8_t tempContinue = 0xFF;
+ continueToExecute(tempContinue);
+ if(tempContinue == 0x00){
+ gPC.puts("tc list is complete\r\n");
+ // CHECK WEATHER GS VERIFICATION CODE MATCHES
+ uint8_t tempGSver = 0x00;
+ GScodeVerification(tempGSver);
+ if( tempGSver ){
+ gPC.puts("GC code match !!\r\n");
+ gFLAGS = gFLAGS | COM_SESSION_VALIDITY;
+ COM_POWER_ON_TX;
+ // PENDING: PA HOT HANDLED IN EXECUTE_XXX FUNCTIONS
+ uint8_t tempPAHot = 0x00;
+ isPAhot(tempPAHot);
+ if( tempPAHot == 0xFF ){
+ gPC.puts("EXECUTING TELECOMMANDS\r\n");
+ EXECUTE_OBOSC_ONLY;
+ EXECUTE_TC;
+ gPC.puts("COMPLETED EXECUTION\r\n");
+ }
+ else{
+ gFLAGS = gFLAGS | COM_PA_HOT_FLAG;
+ COM_POWER_OFF_TX;
+ RX1M.attach(&rx_read, Serial::RxIrq);
+ gFLAGS = gFLAGS & (~COM_MNG_TMTC_RUNNING_FLAG);
+ }
+ }
+ else{
+ gPC.puts("GS code mismatch !!\r\n");
+ reset_all;
+ gFLAGS = gFLAGS & (~COM_SESSION_VALIDITY);
+ // PENDING : ENABLE THREADS
+ gSESSION_TIMEOUT.detach();
+ gFLAGS = gFLAGS & (~COM_SESSION_FLAG);
+ // WARNING: clear COM_MNG_TMTC ?
+ }
}
else{
- gFLAGS = gFLAGS & (~COM_SESSION_VALIDITY);
- // PENDING : ENABLE THREADS
- gSESSION_TIMEOUT.detach();
- gFLAGS = gFLAGS & (~COM_SESSION_FLAG);
+ COM_POWER_ON_TX;
+ // PENDING : POWER OFF TX
+ RX1M.attach(&rx_read, Serial::RxIrq);
+ gFLAGS = gFLAGS & (~COM_MNG_TMTC_RUNNING_FLAG);
}
}
else{
- // PENDING : COM_POWER_ON_TX
- // PENDING : POWER OFF TX
+ COM_POWER_ON_TX;
+ // POWER OFF TX
+ // WARNING: reset_all ? clear com_session ?
RX1M.attach(&rx_read, Serial::RxIrq);
+ gFLAGS = gFLAGS & (~COM_MNG_TMTC_RUNNING_FLAG);
}
}
- else if( !(gFLAGS & COM_TX_FLAG) ){
+ else{
+ gPC.puts("No valid TC recweived\r\n");
RX1M.attach(&rx_read, Serial::RxIrq);
- // PENDING : ENABLE THREADS
- gSESSION_TIMEOUT.detach();
- gFLAGS = gFLAGS & (~COM_SESSION_FLAG);
+ gFLAGS = gFLAGS & (~COM_MNG_TMTC_RUNNING_FLAG);
+
+ if( !(gFLAGS & COM_TX_FLAG) ){
+ reset_all;
+ // PENDING : ENABLE THREADS
+ gSESSION_TIMEOUT.detach();
+ gFLAGS = gFLAGS & (~COM_SESSION_FLAG);
+ }
+ // else wait
}
}
else if( gFLAGS & COM_PA_HOT_FLAG ){
uint8_t tempPA = 0xFF;
isPAhot(tempPA);
if( tempPA == 0x00 ){
- gCOM_PA_COOLING_TIMER.attach(&after_cooling_pa, COM_PA_COOLING_TIME_LIMIT);
+ gCOM_PA_COOLING_TIMEOUT.attach(&after_cooling_pa, COM_PA_COOLING_TIME_LIMIT);
}
else{
gFLAGS = gFLAGS & (~COM_PA_HOT_FLAG);
- gCOM_PA_COOLING_TIMER.detach();
- // PENDING : COM POWER ON TX
+ gCOM_PA_COOLING_TIMEOUT.detach();
+ COM_POWER_ON_TX;
EXECUTE_OBOSC_ONLY;
EXECUTE_TC;
}
}
else{
// SOME INVALID SIGNAL RECEIVED
-
- // PENDING : COM_POWER_OFF_TX
+ COM_POWER_OFF_TX;
reset_all;
// PENDING : ENABLE THREADS
gSESSION_TIMEOUT.detach();
@@ -153,46 +204,41 @@
}
}
-void SCIENCE_FUN(void const *args){
-// SPIpayload.format(8,0);
-// SPIpayload.frequency(1000000);
- for ( int i = 0 ; i < PAYLOAD_BUFFER_LENGTH ; i++ ){
- gPAYLOAD_BUFFER[i] = 1;
- }
-
- // initialise the buffer for dma
- // SPIpayload.bulkRead_init(VAR_SPACE::payload_dma_buffer, PAYLOAD_DMA_SIZE, &payload_interrupt_fun);
- // start dma read
- // SPIpayload.bulkRead_start();
-
- // attach DMA interrupt
- while(true){
- gSCIENCE_THREAD->signal_wait(0x01);
-
-//*********************************************************THE TEST
-
- //read rtc time later
- uint64_t RTC_time = 0;
- Science_Data_Compression::complete_compression( gPAYLOAD_BUFFER , RTC_time);
-// SPI_mutex.lock();
-// disk_write(SDcard_lastWritten , 5);
-// SPI_mutex.unlock();
-
-//**********************************************THE TEST
-
-
-
-// counter_for_payload++;
-// if(counter_for_payload == 10){
-// payload_ticker.detach();
-// ledg = 0;
-// PC.puts("its over\r\n");
-// }
-
-
-
-
-// SPIpayload.bulkRead_start();
-
- }
-}
\ No newline at end of file
+//void SCIENCE_FUN(void const *args){
+//// SPIpayload.format(8,0);
+//// SPIpayload.frequency(1000000);
+// for ( int i = 0 ; i < PAYLOAD_BUFFER_LENGTH ; i++ ){
+// gPAYLOAD_BUFFER[i] = 1;
+// }
+//
+// // initialise the buffer for dma
+// // SPIpayload.bulkRead_init(VAR_SPACE::payload_dma_buffer, PAYLOAD_DMA_SIZE, &payload_interrupt_fun);
+// // start dma read
+// // SPIpayload.bulkRead_start();
+//
+// // attach DMA interrupt
+// while(true){
+// gSCIENCE_THREAD->signal_wait(0x01);
+//
+////*********************************************************THE TEST
+//
+// //read rtc time later
+// uint64_t RTC_time = 0;
+// Science_Data_Compression::complete_compression( gPAYLOAD_BUFFER , RTC_time);
+//// SPI_mutex.lock();
+//// disk_write(SDcard_lastWritten , 5);
+//// SPI_mutex.unlock();
+//
+////**********************************************THE TEST
+//
+//// counter_for_payload++;
+//// if(counter_for_payload == 10){
+//// payload_ticker.detach();
+//// ledg = 0;
+//// PC.puts("its over\r\n");
+//// }
+//
+//// SPIpayload.bulkRead_start();
+//
+// }
+//}
\ No newline at end of file