![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Part of the Pacemaker Project; this models the Pacemaker.
Dependencies: mbed TextLCD mbed-rtos
PMTest.cpp
- Committer:
- chadnach1
- Date:
- 2015-11-30
- Revision:
- 20:dc272bfaa276
- Parent:
- 8:5924b2048a27
- Child:
- 23:08456978fb78
File content as of revision 20:dc272bfaa276:
#include "mbed.h" #include "LPC17xx.h" #include "TextLCD.h" #include "rtos.h" #include "Thread.h" DigitalOut vsense(p23); DigitalOut asense(p24); DigitalIn apace(p22); DigitalIn vpace(p21); int timer_count; int curr_test; int[][] testfunc; // hardware interrupt handler, adapted from code in piazza post by Dagaen extern "C" void TIMER0_IRQHandler (void) { if((LPC_TIM0->IR & 0x01) == 0x01) // if MR0 interrupt, proceed { LPC_TIM0->IR |= 1 << 0; // Clear MR0 interrupt flag timer_count++; //increment timer_count } } // init the hardware interrupt (timer0), adapted same as above void timer0_init(int n) { LPC_SC->PCONP |=1<1; //timer0 power on LPC_SC-> PCLKSEL0 |= 1 << 2; // set timer clock to CCLCK nondivided (1 clock cycle = 1 increment) LPC_TIM0->MR0 = n; //100mhz clock cycle, 1 cycle = 10ns, 10ms = 10 000 000 ns = 1M cycles LPC_TIM0->MCR = 3; //interrupt and reset control //3 = Interrupt & reset timer0 on match (111) sets all three bits NVIC_EnableIRQ(TIMER0_IRQn); //enable timer0 interrupt } // interrupt function void interrupt_and_run_test(){ // zero timer, set for 1ms interrupt timer0_init(100000) // wait for atrial pulse while(apace != 1}{} // check if timer was within event if(timer_count < testfunc[curr_test][0]){ printf("ATRIAL PULSE FOR TEST " + curr_test + " WAS WITHIN BOUNDS\n"); } // send vsense while(timer_count < testfunc[curr_test][1]){}; vpace = 1; // send asense while(timer_count < testfunc[curr_test][2]){}; apace = 1; // check if timer was in event // wait for vpace // wait for atrial pulse while(vpace != 1}{} // check if timer was within event if(timer_count < testfunc[curr_test][0]){ printf("VENT PULSE FOR TEST " + curr_test + " WAS WITHIN BOUNDS\n"); }