ceri clatworthy
ADC Niose test Connect four analog signals to your MBED. and then run the Windows app. The four traces are displayed on an oscilloscope like display. I have used a USB HID DEVICE link, so connections to D+, D- are required. The MBED code is otherwise quite basic, So you can modify it to your own test needs. Additionaly, there is a 16 bit count value, in my MBED code Mainly to test if MSB & LSB are correct.
Revision 0:cbe01b678bd4, committed 2011-11-19
- Comitter:
- ceri
- Date:
- Sat Nov 19 22:54:22 2011 +0000
- Commit message:
- just enough to work
Changed in this revision
diff -r 000000000000 -r cbe01b678bd4 HID/USBBusInterface.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBBusInterface.h Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,59 @@
+/* USBBusInterface.h */
+/* USB Bus Interface */
+/* Copyright (c) 2011 ARM Limited. All rights reserved. */
+
+#ifndef USBBUSINTERFACE_H
+#define USBBUSINTERFACE_H
+
+#include "mbed.h"
+#include "USBEndpoints.h"
+
+class USBHAL {
+public:
+ /* Configuration */
+ USBHAL();
+ ~USBHAL();
+ void connect(void);
+ void disconnect(void);
+ void configureDevice(void);
+ void unconfigureDevice(void);
+ void setAddress(uint8_t address);
+ void remoteWakeup(void);
+
+ /* Endpoint 0 */
+ void EP0setup(uint8_t *buffer);
+ void EP0read(void);
+ uint32_t EP0getReadResult(uint8_t *buffer);
+ void EP0write(uint8_t *buffer, uint32_t size);
+ void EP0getWriteResult(void);
+ void EP0stall(void);
+
+ /* Other endpoints */
+ EP_STATUS endpointRead(uint8_t endpoint, uint32_t maximumSize);
+ EP_STATUS endpointReadResult(uint8_t endpoint, uint8_t *data, uint32_t *bytesRead);
+ EP_STATUS endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size);
+ EP_STATUS endpointWriteResult(uint8_t endpoint);
+ void stallEndpoint(uint8_t endpoint);
+ void unstallEndpoint(uint8_t endpoint);
+ bool realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t options);
+ bool getEndpointStallState(unsigned char endpoint);
+
+protected:
+ virtual void busReset(void){};
+ virtual void EP0setupCallback(void){};
+ virtual void EP0out(void){};
+ virtual void EP0in(void){};
+ virtual void connectStateChanged(unsigned int connected){};
+ virtual void suspendStateChanged(unsigned int suspended){};
+ void SOF(int frameNumber){};
+ virtual bool EPBULK_OUT_callback(){return false;};
+ virtual bool EPBULK_IN_callback(){return false;};
+
+private:
+ void usbisr(void);
+ static void _usbisr(void);
+ static USBHAL * instance;
+};
+#endif
+
+
diff -r 000000000000 -r cbe01b678bd4 HID/USBBusInterface_LPC11U.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBBusInterface_LPC11U.cpp Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,660 @@
+// USBBusInterface_LPC11U.c
+// USB Bus Interface for NXP LPC11Uxx
+// Copyright (c) 2011 ARM Limited. All rights reserved.
+
+// Reference:
+// NXP UM10462 LPC11U1x User manual Rev. 1 � 14 April 2011
+
+#ifdef TARGET_LPC11U24
+
+#include "USBBusInterface.h"
+
+USBHAL * USBHAL::instance;
+
+
+// Valid physical endpoint numbers are 0 to (NUMBER_OF_PHYSICAL_ENDPOINTS-1)
+#define LAST_PHYSICAL_ENDPOINT (NUMBER_OF_PHYSICAL_ENDPOINTS-1)
+
+// Convert physical endpoint number to register bit
+#define EP(endpoint) (1UL<<endpoint)
+
+// Convert physical to logical
+#define PHY_TO_LOG(endpoint) ((endpoint)>>1)
+
+// Get endpoint direction
+#define IN_EP(endpoint) ((endpoint) & 1U ? true : false)
+#define OUT_EP(endpoint) ((endpoint) & 1U ? false : true)
+
+// USB RAM
+#define USB_RAM_START (0x20004000)
+#define USB_RAM_SIZE (0x00000800)
+
+// SYSAHBCLKCTRL
+#define CLK_USB (1UL<<14)
+#define CLK_USBRAM (1UL<<27)
+
+// USB Information register
+#define FRAME_NR(a) ((a) & 0x7ff) // Frame number
+
+// USB Device Command/Status register
+#define DEV_ADDR_MASK (0x7f) // Device address
+#define DEV_ADDR(a) ((a) & DEV_ADDR_MASK)
+#define DEV_EN (1UL<<7) // Device enable
+#define SETUP (1UL<<8) // SETUP token received
+#define PLL_ON (1UL<<9) // PLL enabled in suspend
+#define DCON (1UL<<16) // Device status - connect
+#define DSUS (1UL<<17) // Device status - suspend
+#define DCON_C (1UL<<24) // Connect change
+#define DSUS_C (1UL<<25) // Suspend change
+#define DRES_C (1UL<<26) // Reset change
+#define VBUSDEBOUNCED (1UL<<28) // Vbus detected
+
+// Endpoint Command/Status list
+#define CMDSTS_A (1UL<<31) // Active
+#define CMDSTS_D (1UL<<30) // Disable
+#define CMDSTS_S (1UL<<29) // Stall
+#define CMDSTS_TR (1UL<<28) // Toggle Reset
+#define CMDSTS_RF (1UL<<27) // Rate Feedback mode
+#define CMDSTS_TV (1UL<<27) // Toggle Value
+#define CMDSTS_T (1UL<<26) // Endpoint Type
+#define CMDSTS_NBYTES(n) (((n)&0x3ff)<<16) // Number of bytes
+#define CMDSTS_ADDRESS_OFFSET(a) (((a)>>6)&0xffff) // Buffer start address
+
+#define BYTES_REMAINING(s) (((s)>>16)&0x3ff) // Bytes remaining after transfer
+
+// USB Non-endpoint interrupt sources
+#define FRAME_INT (1UL<<30)
+#define DEV_INT (1UL<<31)
+
+static int epComplete = 0;
+
+// One entry for a double-buffered logical endpoint in the endpoint
+// command/status list. Endpoint 0 is single buffered, out[1] is used
+// for the SETUP packet and in[1] is not used
+typedef __packed struct {
+ uint32_t out[2];
+ uint32_t in[2];
+} EP_COMMAND_STATUS;
+
+typedef __packed struct {
+ uint8_t out[MAX_PACKET_SIZE_EP0];
+ uint8_t in[MAX_PACKET_SIZE_EP0];
+ uint8_t setup[SETUP_PACKET_SIZE];
+} CONTROL_TRANSFER;
+
+typedef __packed struct {
+ uint32_t maxPacket;
+ uint32_t buffer[2];
+ uint32_t options;
+} EP_STATE;
+
+static volatile EP_STATE endpointState[NUMBER_OF_PHYSICAL_ENDPOINTS];
+
+// Pointer to the endpoint command/status list
+static EP_COMMAND_STATUS *ep = NULL;
+
+// Pointer to endpoint 0 data (IN/OUT and SETUP)
+static CONTROL_TRANSFER *ct = NULL;
+
+// Shadow DEVCMDSTAT register to avoid accidentally clearing flags or
+// initiating a remote wakeup event.
+static volatile uint32_t devCmdStat;
+
+// Pointers used to allocate USB RAM
+static uint32_t usbRamPtr = USB_RAM_START;
+static uint32_t epRamPtr = 0; // Buffers for endpoints > 0 start here
+
+#define ROUND_UP_TO_MULTIPLE(x, m) ((((x)+((m)-1))/(m))*(m))
+
+void USBMemCopy(uint8_t *dst, uint8_t *src, uint32_t size);
+void USBMemCopy(uint8_t *dst, uint8_t *src, uint32_t size) {
+ if (size > 0) {
+ do {
+ *dst++ = *src++;
+ } while (--size > 0);
+ }
+}
+
+
+USBHAL::USBHAL(void) {
+ NVIC_DisableIRQ(USB_IRQn);
+
+ // USB_VBUS input, Pull down, Hysteresis enabled
+ //LPC_IOCON->PIO0_3 = 0x00000029;
+ // nUSB_CONNECT output
+ LPC_IOCON->PIO0_6 = 0x00000001;
+
+ // Enable clocks (USB registers, USB RAM)
+ LPC_SYSCON->SYSAHBCLKCTRL |= CLK_USB | CLK_USBRAM;
+
+ // Ensure device disconnected (DCON not set)
+ LPC_USB->DEVCMDSTAT = 0;
+
+ // Device must be disconnected for at least 2.5uS
+ // to ensure that the USB host sees the device as
+ // disconnected if the target CPU is reset.
+ wait(0.3);
+
+
+ // Reserve space in USB RAM for endpoint command/status list
+ // Must be 256 byte aligned
+ usbRamPtr = ROUND_UP_TO_MULTIPLE(usbRamPtr, 256);
+ ep = (EP_COMMAND_STATUS *)usbRamPtr;
+ usbRamPtr += (sizeof(EP_COMMAND_STATUS) * NUMBER_OF_LOGICAL_ENDPOINTS);
+ LPC_USB->EPLISTSTART = (uint32_t)(ep) & 0xffffff00;
+
+ // Reserve space in USB RAM for Endpoint 0
+ // Must be 64 byte aligned
+ usbRamPtr = ROUND_UP_TO_MULTIPLE(usbRamPtr, 64);
+ ct = (CONTROL_TRANSFER *)usbRamPtr;
+ usbRamPtr += sizeof(CONTROL_TRANSFER);
+ LPC_USB->DATABUFSTART =(uint32_t)(ct) & 0xffc00000;
+
+ // Setup command/status list for EP0
+ ep[0].out[0] = 0;
+ ep[0].in[0] = 0;
+ ep[0].out[1] = CMDSTS_ADDRESS_OFFSET((uint32_t)ct->setup);
+
+ // Route all interrupts to IRQ, some can be routed to
+ // USB_FIQ if you wish.
+ LPC_USB->INTROUTING = 0;
+
+ // Set device address 0, enable USB device, no remote wakeup
+ devCmdStat = DEV_ADDR(0) | DEV_EN | DSUS;
+ LPC_USB->DEVCMDSTAT = devCmdStat;
+
+ // Enable interrupts for device events and EP0
+ LPC_USB->INTEN = DEV_INT | EP(EP0IN) | EP(EP0OUT);
+ instance = this;
+ NVIC_SetVector(USB_IRQn, (uint32_t)&_usbisr);
+ NVIC_EnableIRQ(USB_IRQn);
+}
+
+USBHAL::~USBHAL(void) {
+ // Ensure device disconnected (DCON not set)
+ LPC_USB->DEVCMDSTAT = 0;
+
+ // Disable USB interrupts
+ NVIC_DisableIRQ(USB_IRQn);
+}
+
+void USBHAL::connect(void) {
+ devCmdStat |= DCON;
+ LPC_USB->DEVCMDSTAT = devCmdStat;
+}
+
+void USBHAL::disconnect(void) {
+ devCmdStat &= ~DCON;
+ LPC_USB->DEVCMDSTAT = devCmdStat;
+}
+
+void USBHAL::configureDevice(void) {
+}
+
+void USBHAL::unconfigureDevice(void) {
+}
+
+void USBHAL::EP0setup(uint8_t *buffer) {
+ // Copy setup packet data
+ USBMemCopy(buffer, ct->setup, SETUP_PACKET_SIZE);
+}
+
+void USBHAL::EP0read(void) {
+ // Start an endpoint 0 read
+
+ // The USB ISR will call USBDevice_EP0out() when a packet has been read,
+ // the USBDevice layer then calls USBBusInterface_EP0getReadResult() to
+ // read the data.
+
+ ep[0].out[0] = CMDSTS_A |CMDSTS_NBYTES(MAX_PACKET_SIZE_EP0) \
+ | CMDSTS_ADDRESS_OFFSET((uint32_t)ct->out);
+}
+
+uint32_t USBHAL::EP0getReadResult(uint8_t *buffer) {
+ // Complete an endpoint 0 read
+ uint32_t bytesRead;
+
+ // Find how many bytes were read
+ bytesRead = MAX_PACKET_SIZE_EP0 - BYTES_REMAINING(ep[0].out[0]);
+
+ // Copy data
+ USBMemCopy(buffer, ct->out, bytesRead);
+ return bytesRead;
+}
+
+void USBHAL::EP0write(uint8_t *buffer, uint32_t size) {
+ // Start and endpoint 0 write
+
+ // The USB ISR will call USBDevice_EP0in() when the data has
+ // been written, the USBDevice layer then calls
+ // USBBusInterface_EP0getWriteResult() to complete the transaction.
+
+ // Copy data
+ USBMemCopy(ct->in, buffer, size);
+
+ // Start transfer
+ ep[0].in[0] = CMDSTS_A | CMDSTS_NBYTES(size) \
+ | CMDSTS_ADDRESS_OFFSET((uint32_t)ct->in);
+}
+
+
+EP_STATUS USBHAL::endpointRead(uint8_t endpoint, uint32_t maximumSize) {
+ ep[PHY_TO_LOG(endpoint)].out[0] = CMDSTS_A | CMDSTS_NBYTES(maximumSize) \
+ | CMDSTS_ADDRESS_OFFSET((uint32_t)ct->out);
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointReadResult(uint8_t endpoint, uint8_t *data, uint32_t *bytesRead) {
+ if (!(epComplete & EP(endpoint)))
+ return EP_PENDING;
+ else {
+ epComplete &= ~EP(endpoint);
+ // Find how many bytes were read
+ *bytesRead = (uint32_t) (endpointState[endpoint].maxPacket - BYTES_REMAINING(ep[PHY_TO_LOG(endpoint)].out[0]));
+ // Copy data
+ USBMemCopy(data, ct->out, *bytesRead);
+ return EP_COMPLETED;
+ }
+}
+
+void USBHAL::EP0getWriteResult(void) {
+ // Complete an endpoint 0 write
+
+ // Nothing required for this target
+ return;
+}
+
+void USBHAL::EP0stall(void) {
+ ep[0].in[0] = CMDSTS_S;
+ ep[0].out[0] = CMDSTS_S;
+}
+
+void USBHAL::setAddress(uint8_t address) {
+ devCmdStat &= ~DEV_ADDR_MASK;
+ devCmdStat |= DEV_ADDR(address);
+ LPC_USB->DEVCMDSTAT = devCmdStat;
+}
+
+EP_STATUS USBHAL::endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size) {
+ uint32_t flags = 0;
+ uint32_t bf;
+
+ // Validate parameters
+ if (data == NULL) {
+ return EP_INVALID;
+ }
+
+ if (endpoint > LAST_PHYSICAL_ENDPOINT) {
+ return EP_INVALID;
+ }
+
+ if ((endpoint==EP0IN) || (endpoint==EP0OUT)) {
+ return EP_INVALID;
+ }
+
+ if (size > endpointState[endpoint].maxPacket) {
+ return EP_INVALID;
+ }
+
+ if (LPC_USB->EPBUFCFG & EP(endpoint)) {
+ // Double buffered // TODO: FIX THIS
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ bf = 1;
+ } else {
+ bf = 0;
+ }
+ } else {
+ // Single buffered
+ bf = 0;
+ }
+
+ // Check if already active
+ if (ep[PHY_TO_LOG(endpoint)].in[bf] & CMDSTS_A) {
+ return EP_INVALID;
+ }
+
+ // Check if stalled
+ if (ep[PHY_TO_LOG(endpoint)].in[bf] & CMDSTS_S) {
+ return EP_STALLED;
+ }
+
+ // Copy data to USB RAM
+ USBMemCopy((uint8_t *)endpointState[endpoint].buffer[bf], data, size);
+
+ // Add options
+ if (endpointState[endpoint].options & RATE_FEEDBACK_MODE) {
+ flags |= CMDSTS_RF;
+ }
+
+ if (endpointState[endpoint].options & ISOCHRONOUS) {
+ flags |= CMDSTS_T;
+ }
+
+ // Add transfer
+ ep[PHY_TO_LOG(endpoint)].in[bf] = CMDSTS_ADDRESS_OFFSET( \
+ endpointState[endpoint].buffer[bf]) \
+ | CMDSTS_NBYTES(size) | CMDSTS_A | flags;
+
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointWriteResult(uint8_t endpoint) {
+ uint32_t bf;
+ // Validate parameters
+
+ if (endpoint > LAST_PHYSICAL_ENDPOINT) {
+ return EP_INVALID;
+ }
+
+ if (OUT_EP(endpoint)) {
+ return EP_INVALID;
+ }
+
+ if (LPC_USB->EPBUFCFG & EP(endpoint)) {
+ // Double buffered // TODO: FIX THIS
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ bf = 1;
+ } else {
+ bf = 0;
+ }
+ } else {
+ // Single buffered
+ bf = 0;
+ }
+
+ // Check if endpoint still active
+ if (ep[PHY_TO_LOG(endpoint)].in[bf] & CMDSTS_A) {
+ return EP_PENDING;
+ }
+
+ // Check if stalled
+ if (ep[PHY_TO_LOG(endpoint)].in[bf] & CMDSTS_S) {
+ return EP_STALLED;
+ }
+
+ return EP_COMPLETED;
+}
+
+void USBHAL::stallEndpoint(uint8_t endpoint) {
+
+ // TODO: should this clear active bit?
+
+ if (IN_EP(endpoint)) {
+ ep[PHY_TO_LOG(endpoint)].in[0] |= CMDSTS_S;
+ ep[PHY_TO_LOG(endpoint)].in[1] |= CMDSTS_S;
+ } else {
+ ep[PHY_TO_LOG(endpoint)].out[0] |= CMDSTS_S;
+ ep[PHY_TO_LOG(endpoint)].out[1] |= CMDSTS_S;
+ }
+}
+
+void USBHAL::unstallEndpoint(uint8_t endpoint) {
+ if (LPC_USB->EPBUFCFG & EP(endpoint)) {
+ // Double buffered
+ if (IN_EP(endpoint)) {
+ ep[PHY_TO_LOG(endpoint)].in[0] = 0; // S = 0
+ ep[PHY_TO_LOG(endpoint)].in[1] = 0; // S = 0
+
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ ep[PHY_TO_LOG(endpoint)].in[1] = CMDSTS_TR; // S =0, TR=1, TV = 0
+ } else {
+ ep[PHY_TO_LOG(endpoint)].in[0] = CMDSTS_TR; // S =0, TR=1, TV = 0
+ }
+ } else {
+ ep[PHY_TO_LOG(endpoint)].out[0] = 0; // S = 0
+ ep[PHY_TO_LOG(endpoint)].out[1] = 0; // S = 0
+
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ ep[PHY_TO_LOG(endpoint)].out[1] = CMDSTS_TR; // S =0, TR=1, TV = 0
+ } else {
+ ep[PHY_TO_LOG(endpoint)].out[0] = CMDSTS_TR; // S =0, TR=1, TV = 0
+ }
+ }
+ } else {
+ // Single buffered
+ if (IN_EP(endpoint)) {
+ ep[PHY_TO_LOG(endpoint)].in[0] = CMDSTS_TR; // S=0, TR=1, TV = 0
+ } else {
+ ep[PHY_TO_LOG(endpoint)].out[0] = CMDSTS_TR; // S=0, TR=1, TV = 0
+ }
+ }
+}
+
+bool USBHAL::getEndpointStallState(unsigned char endpoint) {
+ if (IN_EP(endpoint)) {
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ if (ep[PHY_TO_LOG(endpoint)].in[1] & CMDSTS_S) {
+ return true;
+ }
+ } else {
+ if (ep[PHY_TO_LOG(endpoint)].in[0] & CMDSTS_S) {
+ return true;
+ }
+ }
+ } else {
+ if (LPC_USB->EPINUSE & EP(endpoint)) {
+ if (ep[PHY_TO_LOG(endpoint)].out[1] & CMDSTS_S) {
+ return true;
+ }
+ } else {
+ if (ep[PHY_TO_LOG(endpoint)].out[0] & CMDSTS_S) {
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
+bool USBHAL::realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t options) {
+ uint32_t tmpEpRamPtr;
+
+ // Support for double buffered endpoints needs to be fixed/finished in this
+ // software - force single buffered for now.
+
+
+ options |= SINGLE_BUFFERED; // TODO - FIX THIS
+
+ if (endpoint > LAST_PHYSICAL_ENDPOINT) {
+ return false;
+ }
+
+ // Not applicable to the control endpoints
+ if ((endpoint==EP0IN) || (endpoint==EP0OUT)) {
+ return false;
+ }
+
+ // Allocate buffers in USB RAM
+ tmpEpRamPtr = epRamPtr;
+
+ // Must be 64 byte aligned
+ tmpEpRamPtr = ROUND_UP_TO_MULTIPLE(tmpEpRamPtr, 64);
+
+ if ((tmpEpRamPtr + maxPacket) > (USB_RAM_START + USB_RAM_SIZE)) {
+ // Out of memory
+ return false;
+ }
+
+ // Allocate first buffer
+ endpointState[endpoint].buffer[0] = tmpEpRamPtr;
+ tmpEpRamPtr += maxPacket;
+
+ if (!(options & SINGLE_BUFFERED)) {
+ // Must be 64 byte aligned
+ tmpEpRamPtr = ROUND_UP_TO_MULTIPLE(tmpEpRamPtr, 64);
+
+ if ((tmpEpRamPtr + maxPacket) > (USB_RAM_START + USB_RAM_SIZE)) {
+ // Out of memory
+ return false;
+ }
+
+ // Allocate second buffer
+ endpointState[endpoint].buffer[1] = tmpEpRamPtr;
+ tmpEpRamPtr += maxPacket;
+ }
+
+ // Commit to this USB RAM allocation
+ epRamPtr = tmpEpRamPtr;
+
+ // Remaining endpoint state values
+ endpointState[endpoint].maxPacket = maxPacket;
+ endpointState[endpoint].options = options;
+
+ // Enable double buffering if required
+ if (options & SINGLE_BUFFERED) {
+ LPC_USB->EPBUFCFG &= ~EP(endpoint);
+ } else {
+ // Double buffered
+ LPC_USB->EPBUFCFG |= EP(endpoint);
+ }
+
+ // Enable interrupt for OUT endpoint
+ LPC_USB->INTEN |= EP(endpoint);
+
+ // Enable endpoint
+ unstallEndpoint(endpoint);
+ return true;
+}
+
+void USBHAL::remoteWakeup(void) {
+ // Clearing DSUS bit initiates a remote wakeup if the
+ // device is currently enabled and suspended - otherwise
+ // it has no effect.
+ LPC_USB->DEVCMDSTAT = devCmdStat & ~DSUS;
+}
+
+
+static void disableEndpoints(void) {
+ uint32_t logEp;
+
+ // Ref. Table 158 "When a bus reset is received, software
+ // must set the disable bit of all endpoints to 1".
+
+ for (logEp = 1; logEp < NUMBER_OF_LOGICAL_ENDPOINTS; logEp++) {
+ ep[logEp].out[0] = CMDSTS_D;
+ ep[logEp].out[1] = CMDSTS_D;
+ ep[logEp].in[0] = CMDSTS_D;
+ ep[logEp].in[1] = CMDSTS_D;
+ }
+
+ // Start of USB RAM for endpoints > 0
+ epRamPtr = usbRamPtr;
+}
+
+
+
+void USBHAL::_usbisr(void)
+{
+ instance->usbisr();
+}
+
+
+void USBHAL::usbisr(void) {
+ // Start of frame
+ if (LPC_USB->INTSTAT & FRAME_INT) {
+ // Clear SOF interrupt
+ LPC_USB->INTSTAT = FRAME_INT;
+
+ // SOF event, read frame number
+ SOF(FRAME_NR(LPC_USB->INFO));
+ }
+
+ // Device state
+ if (LPC_USB->INTSTAT & DEV_INT) {
+ LPC_USB->INTSTAT = DEV_INT;
+
+ if (LPC_USB->DEVCMDSTAT & DCON_C) {
+ // Connect status changed
+ LPC_USB->DEVCMDSTAT = devCmdStat | DCON_C;
+
+ connectStateChanged((LPC_USB->DEVCMDSTAT & DCON) != 0);
+ }
+
+ if (LPC_USB->DEVCMDSTAT & DSUS_C) {
+ // Suspend status changed
+ LPC_USB->DEVCMDSTAT = devCmdStat | DSUS_C;
+
+ suspendStateChanged((LPC_USB->DEVCMDSTAT & DSUS) != 0);
+ }
+
+ if (LPC_USB->DEVCMDSTAT & DRES_C) {
+ // Bus reset
+ LPC_USB->DEVCMDSTAT = devCmdStat | DRES_C;
+
+ // Disable endpoints > 0
+ disableEndpoints();
+
+ // Bus reset event
+ busReset();
+ }
+ }
+
+ // Endpoint 0
+ if (LPC_USB->INTSTAT & EP(EP0OUT)) {
+ // Clear EP0OUT/SETUP interrupt
+ LPC_USB->INTSTAT = EP(EP0OUT);
+
+ // Check if SETUP
+ if (LPC_USB->DEVCMDSTAT & SETUP) {
+ // Clear Active and Stall bits for EP0
+ // Documentation does not make it clear if we must use the
+ // EPSKIP register to achieve this, Fig. 16 and NXP reference
+ // code suggests we can just clear the Active bits - check with
+ // NXP to be sure.
+ ep[0].in[0] = 0;
+ ep[0].out[0] = 0;
+
+ // Clear EP0IN interrupt
+ LPC_USB->INTSTAT = EP(EP0IN);
+
+ // Clear SETUP (and INTONNAK_CI/O) in device status register
+ LPC_USB->DEVCMDSTAT = devCmdStat | SETUP;
+
+ // EP0 SETUP event (SETUP data received)
+ EP0setupCallback();
+ } else {
+ // EP0OUT ACK event (OUT data received)
+ EP0out();
+ }
+ }
+
+ if (LPC_USB->INTSTAT & EP(EP0IN)) {
+ // Clear EP0IN interrupt
+ LPC_USB->INTSTAT = EP(EP0IN);
+
+ // EP0IN ACK event (IN data sent)
+ EP0in();
+ }
+
+ if (LPC_USB->INTSTAT & EP(EP1IN)) {
+ // Clear EP1IN interrupt
+ LPC_USB->INTSTAT = EP(EP1IN);
+ epComplete |= EP(EP1IN);
+ }
+
+ if (LPC_USB->INTSTAT & EP(EP1OUT)) {
+ // Clear EP1OUT interrupt
+ LPC_USB->INTSTAT = EP(EP1OUT);
+ epComplete |= EP(EP1OUT);
+ }
+
+ if (LPC_USB->INTSTAT & EP(EPBULK_IN)) {
+ // Clear EPBULK_OUT interrupt
+ LPC_USB->INTSTAT = EP(EPBULK_IN);
+ epComplete |= EP(EPBULK_IN);
+ if(EPBULK_IN_callback())
+ epComplete &= ~EP(EPBULK_IN);
+ }
+
+ if (LPC_USB->INTSTAT & EP(EPBULK_OUT)) {
+ // Clear EPBULK_OUT interrupt
+ LPC_USB->INTSTAT = EP(EPBULK_OUT);
+ epComplete |= EP(EPBULK_OUT);
+ //Call callback function. If true, clear epComplete
+ if(EPBULK_OUT_callback())
+ epComplete &= ~EP(EPBULK_OUT);
+ }
+
+}
+
+#endif
diff -r 000000000000 -r cbe01b678bd4 HID/USBBusInterface_LPC17_LPC23.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBBusInterface_LPC17_LPC23.cpp Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,675 @@
+// USBBusInterface_LPC17_LPC23.c
+// USB Bus Interface for NXP LPC1768 and LPC2368
+// Copyright (c) 2011 ARM Limited. All rights reserved.
+
+#ifdef TARGET_LPC1768
+
+#include "USBBusInterface.h"
+
+
+// Get endpoint direction
+#define IN_EP(endpoint) ((endpoint) & 1U ? true : false)
+#define OUT_EP(endpoint) ((endpoint) & 1U ? false : true)
+
+// Convert physical endpoint number to register bit
+#define EP(endpoint) (1UL<<endpoint)
+
+// Power Control for Peripherals register
+#define PCUSB (1UL<<31)
+
+// USB Clock Control register
+#define DEV_CLK_EN (1UL<<1)
+#define AHB_CLK_EN (1UL<<4)
+
+// USB Clock Status register
+#define DEV_CLK_ON (1UL<<1)
+#define AHB_CLK_ON (1UL<<4)
+
+// USB Device Interupt registers
+#define FRAME (1UL<<0)
+#define EP_FAST (1UL<<1)
+#define EP_SLOW (1UL<<2)
+#define DEV_STAT (1UL<<3)
+#define CCEMPTY (1UL<<4)
+#define CDFULL (1UL<<5)
+#define RxENDPKT (1UL<<6)
+#define TxENDPKT (1UL<<7)
+#define EP_RLZED (1UL<<8)
+#define ERR_INT (1UL<<9)
+
+// USB Control register
+#define RD_EN (1<<0)
+#define WR_EN (1<<1)
+#define LOG_ENDPOINT(endpoint) ((endpoint>>1)<<2)
+
+// USB Receive Packet Length register
+#define DV (1UL<<10)
+#define PKT_RDY (1UL<<11)
+#define PKT_LNGTH_MASK (0x3ff)
+
+// Serial Interface Engine (SIE)
+#define SIE_WRITE (0x01)
+#define SIE_READ (0x02)
+#define SIE_COMMAND (0x05)
+#define SIE_CMD_CODE(phase, data) ((phase<<8)|(data<<16))
+
+// SIE Command codes
+#define SIE_CMD_SET_ADDRESS (0xD0)
+#define SIE_CMD_CONFIGURE_DEVICE (0xD8)
+#define SIE_CMD_SET_MODE (0xF3)
+#define SIE_CMD_READ_FRAME_NUMBER (0xF5)
+#define SIE_CMD_READ_TEST_REGISTER (0xFD)
+#define SIE_CMD_SET_DEVICE_STATUS (0xFE)
+#define SIE_CMD_GET_DEVICE_STATUS (0xFE)
+#define SIE_CMD_GET_ERROR_CODE (0xFF)
+#define SIE_CMD_READ_ERROR_STATUS (0xFB)
+
+#define SIE_CMD_SELECT_ENDPOINT(endpoint) (0x00+endpoint)
+#define SIE_CMD_SELECT_ENDPOINT_CLEAR_INTERRUPT(endpoint) (0x40+endpoint)
+#define SIE_CMD_SET_ENDPOINT_STATUS(endpoint) (0x40+endpoint)
+
+#define SIE_CMD_CLEAR_BUFFER (0xF2)
+#define SIE_CMD_VALIDATE_BUFFER (0xFA)
+
+// SIE Device Status register
+#define SIE_DS_CON (1<<0)
+#define SIE_DS_CON_CH (1<<1)
+#define SIE_DS_SUS (1<<2)
+#define SIE_DS_SUS_CH (1<<3)
+#define SIE_DS_RST (1<<4)
+
+// SIE Device Set Address register
+#define SIE_DSA_DEV_EN (1<<7)
+
+// SIE Configue Device register
+#define SIE_CONF_DEVICE (1<<0)
+
+// Select Endpoint register
+#define SIE_SE_FE (1<<0)
+#define SIE_SE_ST (1<<1)
+#define SIE_SE_STP (1<<2)
+#define SIE_SE_PO (1<<3)
+#define SIE_SE_EPN (1<<4)
+#define SIE_SE_B_1_FULL (1<<5)
+#define SIE_SE_B_2_FULL (1<<6)
+
+// Set Endpoint Status command
+#define SIE_SES_ST (1<<0)
+#define SIE_SES_DA (1<<5)
+#define SIE_SES_RF_MO (1<<6)
+#define SIE_SES_CND_ST (1<<7)
+
+
+USBHAL * USBHAL::instance;
+
+volatile int epComplete;
+uint32_t endpointStallState;
+
+static void SIECommand(uint32_t command)
+{
+ // The command phase of a SIE transaction
+ LPC_USB->USBDevIntClr = CCEMPTY;
+ LPC_USB->USBCmdCode = SIE_CMD_CODE(SIE_COMMAND, command);
+ while (!(LPC_USB->USBDevIntSt & CCEMPTY));
+}
+
+static void SIEWriteData(uint8_t data)
+{
+ // The data write phase of a SIE transaction
+ LPC_USB->USBDevIntClr = CCEMPTY;
+ LPC_USB->USBCmdCode = SIE_CMD_CODE(SIE_WRITE, data);
+ while (!(LPC_USB->USBDevIntSt & CCEMPTY));
+}
+
+static uint8_t SIEReadData(uint32_t command)
+{
+ // The data read phase of a SIE transaction
+ LPC_USB->USBDevIntClr = CDFULL;
+ LPC_USB->USBCmdCode = SIE_CMD_CODE(SIE_READ, command);
+ while (!(LPC_USB->USBDevIntSt & CDFULL));
+ return (uint8_t)LPC_USB->USBCmdData;
+}
+
+static void SIEsetDeviceStatus(uint8_t status)
+{
+ // Write SIE device status register
+ SIECommand(SIE_CMD_SET_DEVICE_STATUS);
+ SIEWriteData(status);
+}
+
+static uint8_t SIEgetDeviceStatus(void)
+{
+ // Read SIE device status register
+ SIECommand(SIE_CMD_GET_DEVICE_STATUS);
+ return SIEReadData(SIE_CMD_GET_DEVICE_STATUS);
+}
+
+void SIEsetAddress(uint8_t address)
+{
+ // Write SIE device address register
+ SIECommand(SIE_CMD_SET_ADDRESS);
+ SIEWriteData((address & 0x7f) | SIE_DSA_DEV_EN);
+}
+
+static uint8_t SIEselectEndpoint(uint8_t endpoint)
+{
+ // SIE select endpoint command
+ SIECommand(SIE_CMD_SELECT_ENDPOINT(endpoint));
+ return SIEReadData(SIE_CMD_SELECT_ENDPOINT(endpoint));
+}
+
+static uint8_t SIEclearBuffer(void)
+{
+ // SIE clear buffer command
+ SIECommand(SIE_CMD_CLEAR_BUFFER);
+ return SIEReadData(SIE_CMD_CLEAR_BUFFER);
+}
+
+static void SIEvalidateBuffer(void)
+{
+ // SIE validate buffer command
+ SIECommand(SIE_CMD_VALIDATE_BUFFER);
+}
+
+static void SIEsetEndpointStatus(uint8_t endpoint, uint8_t status)
+{
+ // SIE set endpoint status command
+ SIECommand(SIE_CMD_SET_ENDPOINT_STATUS(endpoint));
+ SIEWriteData(status);
+}
+
+static uint16_t SIEgetFrameNumber(void) __attribute__ ((unused));
+static uint16_t SIEgetFrameNumber(void)
+{
+ // Read current frame number
+ uint16_t lowByte;
+ uint16_t highByte;
+
+ SIECommand(SIE_CMD_READ_FRAME_NUMBER);
+ lowByte = SIEReadData(SIE_CMD_READ_FRAME_NUMBER);
+ highByte = SIEReadData(SIE_CMD_READ_FRAME_NUMBER);
+
+ return (highByte << 8) | lowByte;
+}
+
+static void SIEconfigureDevice(void)
+{
+ // SIE Configure device command
+ SIECommand(SIE_CMD_CONFIGURE_DEVICE);
+ SIEWriteData(SIE_CONF_DEVICE);
+}
+
+static void SIEunconfigureDevice(void)
+{
+ // SIE Configure device command
+ SIECommand(SIE_CMD_CONFIGURE_DEVICE);
+ SIEWriteData(0);
+}
+
+static void SIEconnect(void)
+{
+ // Connect USB device
+ uint8_t status;
+
+ status = SIEgetDeviceStatus();
+ SIEsetDeviceStatus(status | SIE_DS_CON);
+}
+
+
+static void SIEdisconnect(void)
+{
+ // Disconnect USB device
+ uint8_t status;
+
+ status = SIEgetDeviceStatus();
+ SIEsetDeviceStatus(status & ~SIE_DS_CON);
+}
+
+
+static uint8_t selectEndpointClearInterrupt(uint8_t endpoint)
+{
+ // Implemented using using EP_INT_CLR.
+ LPC_USB->USBEpIntClr = EP(endpoint);
+ while (!(LPC_USB->USBDevIntSt & CDFULL));
+ return (uint8_t)LPC_USB->USBCmdData;
+}
+
+
+
+
+
+static void enableEndpointEvent(uint8_t endpoint)
+{
+ // Enable an endpoint interrupt
+ LPC_USB->USBEpIntEn |= EP(endpoint);
+}
+
+static void disableEndpointEvent(uint8_t endpoint) __attribute__ ((unused));
+static void disableEndpointEvent(uint8_t endpoint)
+{
+ // Disable an endpoint interrupt
+ LPC_USB->USBEpIntEn &= ~EP(endpoint);
+}
+
+static volatile uint32_t __attribute__((used)) dummyRead;
+
+
+static uint32_t endpointReadcore(uint8_t endpoint, uint8_t *buffer)
+{
+ // Read from an OUT endpoint
+ uint32_t size;
+ uint32_t i;
+ uint32_t data = 0;
+ uint8_t offset;
+
+ LPC_USB->USBCtrl = LOG_ENDPOINT(endpoint) | RD_EN;
+ while (!(LPC_USB->USBRxPLen & PKT_RDY));
+
+ size = LPC_USB->USBRxPLen & PKT_LNGTH_MASK;
+
+ offset = 0;
+
+ if (size > 0)
+ {
+ for (i=0; i<size; i++)
+ {
+ if (offset==0)
+ {
+ // Fetch up to four bytes of data as a word
+ data = LPC_USB->USBRxData;
+ }
+
+ // extract a byte
+ *buffer = (data>>offset) & 0xff;
+ buffer++;
+
+ // move on to the next byte
+ offset = (offset + 8) % 32;
+ }
+ }
+ else
+ {
+ dummyRead = LPC_USB->USBRxData;
+ }
+
+ SIEselectEndpoint(endpoint);
+ SIEclearBuffer();
+ return size;
+}
+
+static void endpointWritecore(uint8_t endpoint, uint8_t *buffer, uint32_t size)
+{
+ // Write to an IN endpoint
+ uint32_t temp, data;
+ uint8_t offset;
+
+ LPC_USB->USBCtrl = LOG_ENDPOINT(endpoint) | WR_EN;
+
+ LPC_USB->USBTxPLen = size;
+ offset = 0;
+ data = 0;
+
+ if (size>0)
+ {
+ do {
+ // Fetch next data byte into a word-sized temporary variable
+ temp = *buffer++;
+
+ // Add to current data word
+ temp = temp << offset;
+ data = data | temp;
+
+ // move on to the next byte
+ offset = (offset + 8) % 32;
+ size--;
+
+ if ((offset==0) || (size==0))
+ {
+ // Write the word to the endpoint
+ LPC_USB->USBTxData = data;
+ data = 0;
+ }
+ } while (size>0);
+ }
+ else
+ {
+ LPC_USB->USBTxData = 0;
+ }
+
+ // Clear WR_EN to cover zero length packet case
+ LPC_USB->USBCtrl=0;
+
+ SIEselectEndpoint(endpoint);
+ SIEvalidateBuffer();
+}
+
+
+
+
+
+
+
+USBHAL::USBHAL(void)
+{
+ // Disable IRQ
+ NVIC_DisableIRQ(USB_IRQn);
+
+ // Enable power to USB device controller
+ LPC_SC->PCONP |= PCUSB;
+
+ // Enable USB clocks
+ LPC_USB->USBClkCtrl |= DEV_CLK_EN | AHB_CLK_EN;
+ while (LPC_USB->USBClkSt != (DEV_CLK_ON | AHB_CLK_ON));
+
+ // Configure pins P0.29 and P0.30 to be USB D+ and USB D-
+ LPC_PINCON->PINSEL1 &= 0xc3ffffff;
+ LPC_PINCON->PINSEL1 |= 0x14000000;
+
+ // Disconnect USB device
+ SIEdisconnect();
+
+ // Configure pin P2.9 to be Connect
+ LPC_PINCON->PINSEL4 &= 0xfffcffff;
+ LPC_PINCON->PINSEL4 |= 0x00040000;
+
+ // Connect must be low for at least 2.5uS
+ wait(0.3);
+
+ // Set the maximum packet size for the control endpoints
+ realiseEndpoint(EP0IN, MAX_PACKET_SIZE_EP0, 0);
+ realiseEndpoint(EP0OUT, MAX_PACKET_SIZE_EP0, 0);
+
+ // Attach IRQ
+ instance = this;
+ NVIC_SetVector(USB_IRQn, (uint32_t)&_usbisr);
+ NVIC_EnableIRQ(USB_IRQn);
+
+ // Enable interrupts for device events and EP0
+ LPC_USB->USBDevIntEn = EP_SLOW | DEV_STAT;
+ enableEndpointEvent(EP0IN);
+ enableEndpointEvent(EP0OUT);
+}
+
+USBHAL::~USBHAL(void)
+{
+ // Ensure device disconnected
+ SIEdisconnect();
+
+ // Disable USB interrupts
+ NVIC_DisableIRQ(USB_IRQn);
+}
+
+void USBHAL::connect(void)
+{
+ // Connect USB device
+ SIEconnect();
+}
+
+void USBHAL::disconnect(void)
+{
+ // Disconnect USB device
+ SIEdisconnect();
+}
+
+void USBHAL::configureDevice(void)
+{
+ SIEconfigureDevice();
+}
+
+void USBHAL::unconfigureDevice(void)
+{
+ SIEunconfigureDevice();
+}
+
+void USBHAL::setAddress(uint8_t address)
+{
+ SIEsetAddress(address);
+}
+
+void USBHAL::EP0setup(uint8_t *buffer)
+{
+ endpointReadcore(EP0OUT, buffer);
+}
+
+void USBHAL::EP0read(void)
+{
+ // Not required
+}
+
+uint32_t USBHAL::EP0getReadResult(uint8_t *buffer)
+{
+ return endpointReadcore(EP0OUT, buffer);
+}
+
+void USBHAL::EP0write(uint8_t *buffer, uint32_t size)
+{
+ endpointWritecore(EP0IN, buffer, size);
+}
+
+void USBHAL::EP0getWriteResult(void)
+{
+ // Not required
+}
+
+void USBHAL::EP0stall(void)
+{
+ // This will stall both control endpoints
+ stallEndpoint(EP0OUT);
+}
+
+EP_STATUS USBHAL::endpointRead(uint8_t endpoint, uint32_t maximumSize)
+{
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointReadResult(uint8_t endpoint, uint8_t * buffer, uint32_t *bytesRead)
+{
+ if(!(epComplete & EP(endpoint)))
+ return EP_PENDING;
+ *bytesRead = endpointReadcore(endpoint, buffer);
+ epComplete &= ~EP(endpoint);
+ return EP_COMPLETED;
+}
+
+EP_STATUS USBHAL::endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size)
+{
+ if (getEndpointStallState(endpoint))
+ {
+ return EP_STALLED;
+ }
+
+ epComplete &= ~EP(endpoint);
+
+ endpointWritecore(endpoint, data, size);
+ return EP_PENDING;
+}
+
+EP_STATUS USBHAL::endpointWriteResult(uint8_t endpoint)
+{
+ if (epComplete & EP(endpoint))
+ {
+ epComplete &= ~EP(endpoint);
+ return EP_COMPLETED;
+ }
+
+ return EP_PENDING;
+}
+
+bool USBHAL::realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t flags)
+{
+ // Realise an endpoint
+ LPC_USB->USBDevIntClr = EP_RLZED;
+ LPC_USB->USBReEp |= EP(endpoint);
+ LPC_USB->USBEpInd = endpoint;
+ LPC_USB->USBMaxPSize = maxPacket;
+
+ while (!(LPC_USB->USBDevIntSt & EP_RLZED));
+ LPC_USB->USBDevIntClr = EP_RLZED;
+
+ // Clear stall state
+ endpointStallState &= ~EP(endpoint);
+
+ enableEndpointEvent(endpoint);
+ return true;
+}
+
+void USBHAL::stallEndpoint(uint8_t endpoint)
+{
+ // Stall an endpoint
+ if ( (endpoint==EP0IN) || (endpoint==EP0OUT) )
+ {
+ // Conditionally stall both control endpoints
+ SIEsetEndpointStatus(EP0OUT, SIE_SES_CND_ST);
+ }
+ else
+ {
+ SIEsetEndpointStatus(endpoint, SIE_SES_ST);
+
+ // Update stall state
+ endpointStallState |= EP(endpoint);
+ }
+}
+
+void USBHAL::unstallEndpoint(uint8_t endpoint)
+{
+ // Unstall an endpoint. The endpoint will also be reinitialised
+ SIEsetEndpointStatus(endpoint, 0);
+
+ // Update stall state
+ endpointStallState &= ~EP(endpoint);
+}
+
+bool USBHAL::getEndpointStallState(uint8_t endpoint)
+{
+ // Returns true if endpoint stalled
+ return endpointStallState & EP(endpoint);
+}
+
+void USBHAL::remoteWakeup(void)
+{
+ // Remote wakeup
+ uint8_t status;
+
+ // Enable USB clocks
+ LPC_USB->USBClkCtrl |= DEV_CLK_EN | AHB_CLK_EN;
+ while (LPC_USB->USBClkSt != (DEV_CLK_ON | AHB_CLK_ON));
+
+ status = SIEgetDeviceStatus();
+ SIEsetDeviceStatus(status & ~SIE_DS_SUS);
+}
+
+
+
+
+
+void USBHAL::_usbisr(void)
+{
+ instance->usbisr();
+}
+
+DigitalOut ledd(LED1);
+void USBHAL::usbisr(void)
+{
+ uint8_t devStat;
+
+ if (LPC_USB->USBDevIntSt & FRAME)
+ {
+ // Start of frame event
+ SOF(SIEgetFrameNumber());
+ // Clear interrupt status flag
+ LPC_USB->USBDevIntClr = FRAME;
+ }
+
+ if (LPC_USB->USBDevIntSt & DEV_STAT)
+ {
+ // Device Status interrupt
+ // Must clear the interrupt status flag before reading the device status from the SIE
+ LPC_USB->USBDevIntClr = DEV_STAT;
+
+ // Read device status from SIE
+ devStat = SIEgetDeviceStatus();
+
+ if (devStat & SIE_DS_RST)
+ {
+ // Bus reset
+ busReset();
+ }
+ }
+
+ if (LPC_USB->USBDevIntSt & EP_SLOW)
+ {
+ // (Slow) Endpoint Interrupt
+
+ // Process each endpoint interrupt
+ if (LPC_USB->USBEpIntSt & EP(EP0OUT))
+ {
+ if (selectEndpointClearInterrupt(EP0OUT) & SIE_SE_STP)
+ {
+ // this is a setup packet
+ EP0setupCallback();
+ }
+ else
+ {
+ EP0out();
+ }
+ LPC_USB->USBDevIntClr = EP_SLOW;
+ }
+
+ if (LPC_USB->USBEpIntSt & EP(EP0IN))
+ {
+ selectEndpointClearInterrupt(EP0IN);
+ LPC_USB->USBDevIntClr = EP_SLOW;
+ EP0in();
+ }
+
+ // TODO: This should cover all endpoints, not just EP1,2,3:
+ if (LPC_USB->USBEpIntSt & EP(EP1IN))
+ {
+ selectEndpointClearInterrupt(EP1IN);
+ epComplete |= EP(EP1IN);
+ LPC_USB->USBDevIntClr = EP_SLOW;
+ }
+
+ if (LPC_USB->USBEpIntSt & EP(EP1OUT))
+ {
+ selectEndpointClearInterrupt(EP1OUT);
+ epComplete |= EP(EP1OUT);
+ LPC_USB->USBDevIntClr = EP_SLOW;
+ }
+
+ if (LPC_USB->USBEpIntSt & EP(EP2IN))
+ {
+ ledd = 1;
+ selectEndpointClearInterrupt(EP2IN);
+ epComplete |= EP(EP2IN);
+ LPC_USB->USBDevIntClr = EP_SLOW;
+ if(EPBULK_IN_callback())
+ epComplete &= ~EP(EPBULK_OUT);
+ }
+
+ if (LPC_USB->USBEpIntSt & EP(EP2OUT))
+ {
+ selectEndpointClearInterrupt(EP2OUT);
+ epComplete |= EP(EP2OUT);
+ LPC_USB->USBDevIntClr = EP_SLOW;
+ if(EPBULK_OUT_callback())
+ epComplete &= ~EP(EPBULK_OUT);
+ }
+
+ if (LPC_USB->USBEpIntSt & EP(EP3IN))
+ {
+ selectEndpointClearInterrupt(EP3IN);
+ epComplete |= EP(EP3IN);
+ LPC_USB->USBDevIntClr = EP_SLOW;
+ }
+
+ if (LPC_USB->USBEpIntSt & EP(EP3OUT))
+ {
+ selectEndpointClearInterrupt(EP3OUT);
+ epComplete |= EP(EP3OUT);
+ LPC_USB->USBDevIntClr = EP_SLOW;
+ }
+ }
+}
+
+#endif
diff -r 000000000000 -r cbe01b678bd4 HID/USBDescriptor.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/HID/USBDescriptor.h Sat Nov 19 22:54:22 2011 +0000 @@ -0,0 +1,59 @@ +/* USBDescriptor.h */ +/* Definitions and macros for constructing USB descriptors */ +/* Copyright (c) 2011 ARM Limited. All rights reserved. */ + +/* Standard descriptor types */ +#define DEVICE_DESCRIPTOR (1) +#define CONFIGURATION_DESCRIPTOR (2) +#define STRING_DESCRIPTOR (3) +#define INTERFACE_DESCRIPTOR (4) +#define ENDPOINT_DESCRIPTOR (5) + +/* Standard descriptor lengths */ +#define DEVICE_DESCRIPTOR_LENGTH (0x12) +#define CONFIGURATION_DESCRIPTOR_LENGTH (0x09) +#define INTERFACE_DESCRIPTOR_LENGTH (0x09) +#define ENDPOINT_DESCRIPTOR_LENGTH (0x07) + + +/*string offset*/ +#define STRING_OFFSET_LANGID (0) +#define STRING_OFFSET_IMANUFACTURER (1) +#define STRING_OFFSET_IPRODUCT (2) +#define STRING_OFFSET_ISERIAL (3) +#define STRING_OFFSET_ICONFIGURATION (4) +#define STRING_OFFSET_IINTERFACE (5) + +/* USB Specification Release Number */ +#define USB_VERSION_2_0 (0x0200) + +/* Least/Most significant byte of short integer */ +#define LSB(n) ((n)&0xff) +#define MSB(n) (((n)&0xff00)>>8) + +/* Convert physical endpoint number to descriptor endpoint number */ +#define PHY_TO_DESC(endpoint) (((endpoint)>>1) | (((endpoint) & 1) ? 0x80:0)) + +/* bmAttributes in configuration descriptor */ +/* C_RESERVED must always be set */ +#define C_RESERVED (1U<<7) +#define C_SELF_POWERED (1U<<6) +#define C_REMOTE_WAKEUP (1U<<5) + +/* bMaxPower in configuration descriptor */ +#define C_POWER(mA) ((mA)/2) + +/* bmAttributes in endpoint descriptor */ +#define E_CONTROL (0x00) +#define E_ISOCHRONOUS (0x01) +#define E_BULK (0x02) +#define E_INTERRUPT (0x03) + +/* For isochronous endpoints only: */ +#define E_NO_SYNCHRONIZATION (0x00) +#define E_ASYNCHRONOUS (0x04) +#define E_ADAPTIVE (0x08) +#define E_SYNCHRONOUS (0x0C) +#define E_DATA (0x00) +#define E_FEEDBACK (0x10) +#define E_IMPLICIT_FEEDBACK (0x20)
diff -r 000000000000 -r cbe01b678bd4 HID/USBDevice.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBDevice.cpp Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,912 @@
+/* USBDevice.c */
+/* Generic USB device */
+/* Copyright (c) 2011 ARM Limited. All rights reserved. */
+
+/* Reference: */
+/* Universal Serial Bus Specification Revision 2.0, Chapter 9 "USB Device Framework" */
+
+#include "stdint.h"
+
+#include "USBEndpoints.h"
+#include "USBDevice.h"
+#include "USBDescriptor.h"
+#include "USBHID_Types.h"
+
+
+/* Device status */
+#define DEVICE_STATUS_SELF_POWERED (1U<<0)
+#define DEVICE_STATUS_REMOTE_WAKEUP (1U<<1)
+
+/* Endpoint status */
+#define ENDPOINT_STATUS_HALT (1U<<0)
+
+/* Standard feature selectors */
+#define DEVICE_REMOTE_WAKEUP (1)
+#define ENDPOINT_HALT (0)
+
+/* Macro to convert wIndex endpoint number to physical endpoint number */
+#define WINDEX_TO_PHYSICAL(endpoint) (((endpoint & 0x0f) << 1) + \
+ ((endpoint & 0x80) ? 1 : 0))
+
+
+bool USBDevice::requestGetDescriptor(void)
+{
+ bool success = false;
+
+ switch (DESCRIPTOR_TYPE(transfer.setup.wValue))
+ {
+ case DEVICE_DESCRIPTOR:
+ if (deviceDesc() != NULL)
+ {
+ if ((deviceDesc()[0] == DEVICE_DESCRIPTOR_LENGTH) \
+ && (deviceDesc()[1] == DEVICE_DESCRIPTOR))
+ {
+ transfer.remaining = DEVICE_DESCRIPTOR_LENGTH;
+ transfer.ptr = deviceDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ }
+ }
+ break;
+ case CONFIGURATION_DESCRIPTOR:
+ if (configurationDesc() != NULL)
+ {
+ if ((configurationDesc()[0] == CONFIGURATION_DESCRIPTOR_LENGTH) \
+ && (configurationDesc()[1] == CONFIGURATION_DESCRIPTOR))
+ {
+ /* Get wTotalLength */
+ transfer.remaining = configurationDesc()[2] \
+ | (configurationDesc()[3] << 8);
+
+ transfer.ptr = configurationDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ }
+ }
+ break;
+ case STRING_DESCRIPTOR:
+ switch (DESCRIPTOR_INDEX(transfer.setup.wValue))
+ {
+ case STRING_OFFSET_LANGID:
+ transfer.remaining = stringLangidDesc()[0];
+ transfer.ptr = stringLangidDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case STRING_OFFSET_IMANUFACTURER:
+ transfer.remaining = stringImanufacturerDesc()[0];
+ transfer.ptr = stringImanufacturerDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case STRING_OFFSET_IPRODUCT:
+ transfer.remaining = stringIproductDesc()[0];
+ transfer.ptr = stringIproductDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case STRING_OFFSET_ISERIAL:
+ transfer.remaining = stringIserialDesc()[0];
+ transfer.ptr = stringIserialDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case STRING_OFFSET_ICONFIGURATION:
+ transfer.remaining = stringIConfigurationDesc()[0];
+ transfer.ptr = stringIConfigurationDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ case STRING_OFFSET_IINTERFACE:
+ transfer.remaining = stringIinterfaceDesc()[0];
+ transfer.ptr = stringIinterfaceDesc();
+ transfer.direction = DEVICE_TO_HOST;
+ success = true;
+ break;
+ }
+ break;
+ case INTERFACE_DESCRIPTOR:
+ case ENDPOINT_DESCRIPTOR:
+ /* TODO: Support is optional, not implemented here */
+ break;
+ default:
+ break;
+ }
+
+ return success;
+}
+
+void USBDevice::decodeSetupPacket(uint8_t *data, SETUP_PACKET *packet)
+{
+ /* Fill in the elements of a SETUP_PACKET structure from raw data */
+ packet->bmRequestType.dataTransferDirection = (data[0] & 0x80) >> 7;
+ packet->bmRequestType.Type = (data[0] & 0x60) >> 5;
+ packet->bmRequestType.Recipient = data[0] & 0x1f;
+ packet->bRequest = data[1];
+ packet->wValue = (data[2] | (uint16_t)data[3] << 8);
+ packet->wIndex = (data[4] | (uint16_t)data[5] << 8);
+ packet->wLength = (data[6] | (uint16_t)data[7] << 8);
+}
+
+
+bool USBDevice::controlOut(void)
+{
+ /* Control transfer data OUT stage */
+ uint8_t buffer[MAX_PACKET_SIZE_EP0];
+ uint32_t packetSize;
+
+ /* Check we should be transferring data OUT */
+ if (transfer.direction != HOST_TO_DEVICE)
+ {
+ return false;
+ }
+
+ /* Read from endpoint */
+ packetSize = EP0getReadResult(buffer);
+
+ /* Check if transfer size is valid */
+ if (packetSize > transfer.remaining)
+ {
+ /* Too big */
+ return false;
+ }
+
+ /* Update transfer */
+ transfer.ptr += packetSize;
+ transfer.remaining -= packetSize;
+
+ /* Check if transfer has completed */
+ if (transfer.remaining == 0)
+ {
+ /* Transfer completed */
+ if (transfer.notify)
+ {
+ /* Notify class layer. */
+ USBCallback_requestCompleted();
+ transfer.notify = false;
+ }
+ /* Status stage */
+ EP0write(NULL, 0);
+ }
+ else
+ {
+ EP0read();
+ }
+
+ return true;
+}
+
+bool USBDevice::controlIn(void)
+{
+ /* Control transfer data IN stage */
+ uint32_t packetSize;
+
+ /* Check if transfer has completed (status stage transactions */
+ /* also have transfer.remaining == 0) */
+ if (transfer.remaining == 0)
+ {
+ if (transfer.zlp)
+ {
+ /* Send zero length packet */
+ EP0write(NULL, 0);
+ transfer.zlp = false;
+ }
+
+ /* Transfer completed */
+ if (transfer.notify)
+ {
+ /* Notify class layer. */
+ USBCallback_requestCompleted();
+ transfer.notify = false;
+ }
+
+ EP0read();
+
+ /* Completed */
+ return true;
+ }
+
+ /* Check we should be transferring data IN */
+ if (transfer.direction != DEVICE_TO_HOST)
+ {
+ return false;
+ }
+
+ packetSize = transfer.remaining;
+
+ if (packetSize > MAX_PACKET_SIZE_EP0)
+ {
+ packetSize = MAX_PACKET_SIZE_EP0;
+ }
+
+ /* Write to endpoint */
+ EP0write(transfer.ptr, packetSize);
+
+ /* Update transfer */
+ transfer.ptr += packetSize;
+ transfer.remaining -= packetSize;
+
+ return true;
+}
+
+bool USBDevice::requestSetAddress(void)
+{
+ /* Set the device address */
+ setAddress(transfer.setup.wValue);
+
+ if (transfer.setup.wValue == 0)
+ {
+ device.state = DEFAULT;
+ }
+ else
+ {
+ device.state = ADDRESS;
+ }
+
+ return true;
+}
+
+bool USBDevice::requestSetConfiguration(void)
+{
+
+ device.configuration = transfer.setup.wValue;
+ /* Set the device configuration */
+ if (device.configuration == 0)
+ {
+ /* Not configured */
+ unconfigureDevice();
+ device.state = ADDRESS;
+ }
+ else
+ {
+ if (USBCallback_setConfiguration(device.configuration))
+ {
+ /* Valid configuration */
+ configureDevice();
+ device.state = CONFIGURED;
+ }
+ else
+ {
+ return false;
+ }
+ }
+
+ return true;
+}
+
+bool USBDevice::requestGetConfiguration(void)
+{
+ /* Send the device configuration */
+ transfer.ptr = &device.configuration;
+ transfer.remaining = sizeof(device.configuration);
+ transfer.direction = DEVICE_TO_HOST;
+ return true;
+}
+
+bool USBDevice::requestGetInterface(void)
+{
+ static uint8_t alternateSetting;
+
+ /* Return the selected alternate setting for an interface */
+
+ if (device.state != CONFIGURED)
+ {
+ return false;
+ }
+
+ /* TODO: We currently do not support alternate settings */
+ /* so always return zero */
+ /* TODO: Should check that the interface number is valid */
+ alternateSetting = 0;
+
+ /* Send the alternate setting */
+ transfer.ptr = &alternateSetting;
+ transfer.remaining = sizeof(alternateSetting);
+ transfer.direction = DEVICE_TO_HOST;
+ return true;
+}
+
+bool USBDevice::requestSetInterface(void)
+{
+ /* TODO: We currently do not support alternate settings, return false */
+ return false;
+}
+
+bool USBDevice::requestSetFeature()
+{
+ bool success = false;
+
+ if (device.state != CONFIGURED)
+ {
+ /* Endpoint or interface must be zero */
+ if (transfer.setup.wIndex != 0)
+ {
+ return false;
+ }
+ }
+
+ switch (transfer.setup.bmRequestType.Recipient)
+ {
+ case DEVICE_RECIPIENT:
+ /* TODO: Remote wakeup feature not supported */
+ break;
+ case ENDPOINT_RECIPIENT:
+ if (transfer.setup.wValue == ENDPOINT_HALT)
+ {
+ /* TODO: We should check that the endpoint number is valid */
+ stallEndpoint(
+ WINDEX_TO_PHYSICAL(transfer.setup.wIndex));
+ success = true;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return success;
+}
+
+bool USBDevice::requestClearFeature()
+{
+ bool success = false;
+
+ if (device.state != CONFIGURED)
+ {
+ /* Endpoint or interface must be zero */
+ if (transfer.setup.wIndex != 0)
+ {
+ return false;
+ }
+ }
+
+ switch (transfer.setup.bmRequestType.Recipient)
+ {
+ case DEVICE_RECIPIENT:
+ /* TODO: Remote wakeup feature not supported */
+ break;
+ case ENDPOINT_RECIPIENT:
+ /* TODO: We should check that the endpoint number is valid */
+ if (transfer.setup.wValue == ENDPOINT_HALT)
+ {
+ unstallEndpoint(
+ WINDEX_TO_PHYSICAL(transfer.setup.wIndex));
+ success = true;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return success;
+}
+
+bool USBDevice::requestGetStatus(void)
+{
+ static uint16_t status;
+ bool success = false;
+
+ if (device.state != CONFIGURED)
+ {
+ /* Endpoint or interface must be zero */
+ if (transfer.setup.wIndex != 0)
+ {
+ return false;
+ }
+ }
+
+ switch (transfer.setup.bmRequestType.Recipient)
+ {
+ case DEVICE_RECIPIENT:
+ /* TODO: Currently only supports self powered devices */
+ status = DEVICE_STATUS_SELF_POWERED;
+ success = true;
+ break;
+ case INTERFACE_RECIPIENT:
+ status = 0;
+ success = true;
+ break;
+ case ENDPOINT_RECIPIENT:
+ /* TODO: We should check that the endpoint number is valid */
+ if (getEndpointStallState(
+ WINDEX_TO_PHYSICAL(transfer.setup.wIndex)))
+ {
+ status = ENDPOINT_STATUS_HALT;
+ }
+ else
+ {
+ status = 0;
+ }
+ success = true;
+ break;
+ default:
+ break;
+ }
+
+ if (success)
+ {
+ /* Send the status */
+ transfer.ptr = (uint8_t *)&status; /* Assumes little endian */
+ transfer.remaining = sizeof(status);
+ transfer.direction = DEVICE_TO_HOST;
+ }
+
+ return success;
+}
+
+bool USBDevice::requestSetup(void)
+{
+ bool success = false;
+
+ /* Process standard requests */
+ if ((transfer.setup.bmRequestType.Type == STANDARD_TYPE))
+ {
+ switch (transfer.setup.bRequest)
+ {
+ case GET_STATUS:
+ success = requestGetStatus();
+ break;
+ case CLEAR_FEATURE:
+ success = requestClearFeature();
+ break;
+ case SET_FEATURE:
+ success = requestSetFeature();
+ break;
+ case SET_ADDRESS:
+ success = requestSetAddress();
+ break;
+ case GET_DESCRIPTOR:
+ success = requestGetDescriptor();
+ break;
+ case SET_DESCRIPTOR:
+ /* TODO: Support is optional, not implemented here */
+ success = false;
+ break;
+ case GET_CONFIGURATION:
+ success = requestGetConfiguration();
+ break;
+ case SET_CONFIGURATION:
+ success = requestSetConfiguration();
+ break;
+ case GET_INTERFACE:
+ success = requestGetInterface();
+ break;
+ case SET_INTERFACE:
+ success = requestSetInterface();
+ break;
+ default:
+ break;
+ }
+ }
+
+ return success;
+}
+
+bool USBDevice::controlSetup(void)
+{
+ bool success = false;
+
+ /* Control transfer setup stage */
+ uint8_t buffer[MAX_PACKET_SIZE_EP0];
+
+ EP0setup(buffer);
+
+ /* Initialise control transfer state */
+ decodeSetupPacket(buffer, &transfer.setup);
+ transfer.ptr = NULL;
+ transfer.remaining = 0;
+ transfer.direction = 0;
+ transfer.zlp = false;
+ transfer.notify = false;
+
+ /* Process request */
+
+ /* Class / vendor specific */
+ success = USBCallback_request();
+
+ if (!success)
+ {
+ /* Standard requests */
+ if (!requestSetup())
+ {
+ return false;
+ }
+ }
+
+ /* Check transfer size and direction */
+ if (transfer.setup.wLength>0)
+ {
+ if (transfer.setup.bmRequestType.dataTransferDirection \
+ == DEVICE_TO_HOST)
+ {
+ /* IN data stage is required */
+ if (transfer.direction != DEVICE_TO_HOST)
+ {
+ return false;
+ }
+
+ /* Transfer must be less than or equal to the size */
+ /* requested by the host */
+ if (transfer.remaining > transfer.setup.wLength)
+ {
+ transfer.remaining = transfer.setup.wLength;
+ }
+ }
+ else
+ {
+
+ /* OUT data stage is required */
+ if (transfer.direction != HOST_TO_DEVICE)
+ {
+ return false;
+ }
+
+ /* Transfer must be equal to the size requested by the host */
+ if (transfer.remaining != transfer.setup.wLength)
+ {
+ return false;
+ }
+ }
+ }
+ else
+ {
+ /* No data stage; transfer size must be zero */
+ if (transfer.remaining != 0)
+ {
+ return false;
+ }
+ }
+
+ /* Data or status stage if applicable */
+ if (transfer.setup.wLength>0)
+ {
+ if (transfer.setup.bmRequestType.dataTransferDirection \
+ == DEVICE_TO_HOST)
+ {
+ /* Check if we'll need to send a zero length packet at */
+ /* the end of this transfer */
+ if (transfer.setup.wLength > transfer.remaining)
+ {
+ /* Device wishes to transfer less than host requested */
+ if ((transfer.remaining % MAX_PACKET_SIZE_EP0) == 0)
+ {
+ /* Transfer is a multiple of EP0 max packet size */
+ transfer.zlp = true;
+ }
+ }
+
+ /* IN stage */
+ controlIn();
+ }
+ else
+ {
+ /* OUT stage */
+ EP0read();
+ }
+ }
+ else
+ {
+ /* Status stage */
+ EP0write(NULL, 0);
+ }
+
+ return true;
+}
+
+void USBDevice::busReset(void)
+{
+ device.state = DEFAULT;
+ device.configuration = 0;
+ device.suspended = false;
+
+ /* Call class / vendor specific busReset function */
+ USBCallback_busReset();
+}
+
+void USBDevice::EP0setupCallback(void)
+{
+ /* Endpoint 0 setup event */
+ if (!controlSetup())
+ {
+ /* Protocol stall */
+ EP0stall();
+ }
+
+ /* Return true if an OUT data stage is expected */
+}
+
+void USBDevice::EP0out(void)
+{
+ /* Endpoint 0 OUT data event */
+ if (!controlOut())
+ {
+ /* Protocol stall; this will stall both endpoints */
+ EP0stall();
+ }
+}
+
+void USBDevice::EP0in(void)
+{
+ /* Endpoint 0 IN data event */
+ if (!controlIn())
+ {
+ /* Protocol stall; this will stall both endpoints */
+ EP0stall();
+ }
+}
+
+bool USBDevice::configured(void)
+{
+ /* Returns true if device is in the CONFIGURED state */
+ return (device.state == CONFIGURED);
+}
+
+void USBDevice::connect(void)
+{
+ /* Connect device */
+ USBHAL::connect();
+}
+
+void USBDevice::disconnect(void)
+{
+ /* Disconnect device */
+ USBHAL::disconnect();
+}
+
+CONTROL_TRANSFER * USBDevice::getTransferPtr(void)
+{
+ return &transfer;
+}
+
+bool USBDevice::addEndpoint(uint8_t endpoint, uint32_t maxPacket)
+{
+ return realiseEndpoint(endpoint, maxPacket, 0);
+}
+
+bool USBDevice::addRateFeedbackEndpoint(uint8_t endpoint, uint32_t maxPacket)
+{
+ /* For interrupt endpoints only */
+ return realiseEndpoint(endpoint, maxPacket, RATE_FEEDBACK_MODE);
+}
+
+uint8_t * USBDevice::findDescriptor(uint8_t descriptorType)
+{
+ /* Find a descriptor within the list of descriptors */
+ /* following a configuration descriptor. */
+ uint16_t wTotalLength;
+ uint8_t *ptr;
+
+ if (configurationDesc() == NULL)
+ {
+ return NULL;
+ }
+
+ /* Check this is a configuration descriptor */
+ if ((configurationDesc()[0] != CONFIGURATION_DESCRIPTOR_LENGTH) \
+ || (configurationDesc()[1] != CONFIGURATION_DESCRIPTOR))
+ {
+ return NULL;
+ }
+
+ wTotalLength = configurationDesc()[2] | (configurationDesc()[3] << 8);
+
+ /* Check there are some more descriptors to follow */
+ if (wTotalLength <= (CONFIGURATION_DESCRIPTOR_LENGTH+2))
+ /* +2 is for bLength and bDescriptorType of next descriptor */
+ {
+ return false;
+ }
+
+ /* Start at first descriptor after the configuration descriptor */
+ ptr = &(configurationDesc()[CONFIGURATION_DESCRIPTOR_LENGTH]);
+
+ do {
+ if (ptr[1] /* bDescriptorType */ == descriptorType)
+ {
+ /* Found */
+ return ptr;
+ }
+
+ /* Skip to next descriptor */
+ ptr += ptr[0]; /* bLength */
+ } while (ptr < (configurationDesc() + wTotalLength));
+
+ /* Reached end of the descriptors - not found */
+ return NULL;
+}
+
+void USBDevice::SOF(int frameNumber)
+{
+}
+
+void USBDevice::connectStateChanged(unsigned int connected)
+{
+}
+
+void USBDevice::suspendStateChanged(unsigned int suspended)
+{
+}
+
+
+USBDevice::USBDevice(uint16_t vendor_id, uint16_t product_id, uint16_t product_release){
+ VENDOR_ID = vendor_id;
+ PRODUCT_ID = product_id;
+ PRODUCT_RELEASE = product_release;
+
+ /* Set initial device state */
+ device.state = POWERED;
+ device.configuration = 0;
+ device.suspended = false;
+
+ connect();
+};
+
+
+bool USBDevice::readStart(uint8_t endpoint, uint16_t maxSize)
+{
+ return endpointRead(endpoint, maxSize) == EP_PENDING;
+}
+
+
+bool USBDevice::write(uint8_t endpoint, uint8_t * buffer, uint16_t size, uint16_t maxSize)
+{
+ EP_STATUS result;
+
+ if (size > maxSize)
+ {
+ return false;
+ }
+
+ /* Block if not configured */
+ while (!configured());
+
+ /* Send report */
+ result = endpointWrite(endpoint, buffer, size);
+
+ if (result != EP_PENDING)
+ {
+ return false;
+ }
+
+ /* Wait for completion */
+ do {
+ result = endpointWriteResult(endpoint);
+ } while ((result == EP_PENDING) && configured());
+
+ return (result == EP_COMPLETED);
+}
+
+
+bool USBDevice::writeNB(uint8_t endpoint, uint8_t * buffer, uint16_t size, uint16_t maxSize)
+{
+ EP_STATUS result;
+
+ if (size > maxSize)
+ {
+ return false;
+ }
+
+ /* Block if not configured */
+ while (!configured());
+
+ /* Send report */
+ result = endpointWrite(endpoint, buffer, size);
+
+ if (result != EP_PENDING)
+ {
+ return false;
+ }
+
+ result = endpointWriteResult(endpoint);
+
+ return (result == EP_COMPLETED);
+}
+
+
+
+bool USBDevice::read(uint8_t endpoint, uint8_t * buffer, uint16_t * size, uint16_t maxSize)
+{
+ EP_STATUS result;
+
+ /* Block if not configured */
+ while (!configured());
+
+ /* Wait for completion */
+ do {
+ result = endpointReadResult(endpoint, buffer, (uint32_t *)size);
+ } while ((result == EP_PENDING) && configured());
+
+ return (result == EP_COMPLETED);
+}
+
+
+bool USBDevice::readNB(uint8_t endpoint, uint8_t * buffer, uint16_t * size, uint16_t maxSize)
+{
+ EP_STATUS result;
+
+ /* Block if not configured */
+ while (!configured());
+
+ result = endpointReadResult(endpoint, buffer, (uint32_t *)size);
+
+ return (result == EP_COMPLETED);
+}
+
+
+
+uint8_t * USBDevice::deviceDesc() {
+ static uint8_t deviceDescriptor[] = {
+ DEVICE_DESCRIPTOR_LENGTH, /* bLength */
+ DEVICE_DESCRIPTOR, /* bDescriptorType */
+ LSB(USB_VERSION_2_0), /* bcdUSB (LSB) */
+ MSB(USB_VERSION_2_0), /* bcdUSB (MSB) */
+ 0x00, /* bDeviceClass */
+ 0x00, /* bDeviceSubClass */
+ 0x00, /* bDeviceprotocol */
+ MAX_PACKET_SIZE_EP0, /* bMaxPacketSize0 */
+ LSB(VENDOR_ID), /* idVendor (LSB) */
+ MSB(VENDOR_ID), /* idVendor (MSB) */
+ LSB(PRODUCT_ID), /* idProduct (LSB) */
+ MSB(PRODUCT_ID), /* idProduct (MSB) */
+ LSB(PRODUCT_RELEASE), /* bcdDevice (LSB) */
+ MSB(PRODUCT_RELEASE), /* bcdDevice (MSB) */
+ STRING_OFFSET_IMANUFACTURER, /* iManufacturer */
+ STRING_OFFSET_IPRODUCT, /* iProduct */
+ STRING_OFFSET_ISERIAL, /* iSerialNumber */
+ 0x01 /* bNumConfigurations */
+ };
+ return deviceDescriptor;
+}
+
+uint8_t * USBDevice::stringLangidDesc() {
+ static uint8_t stringLangidDescriptor[] = {
+ 0x04, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ 0x09,0x00, /*bString Lang ID - 0x009 - English*/
+ };
+ return stringLangidDescriptor;
+}
+
+uint8_t * USBDevice::stringImanufacturerDesc() {
+ static uint8_t stringImanufacturerDescriptor[] = {
+ 0x12, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ 'm',0,'b',0,'e',0,'d',0,'.',0,'o',0,'r',0,'g',0, /*bString iManufacturer - mbed.org*/
+ };
+ return stringImanufacturerDescriptor;
+}
+
+uint8_t * USBDevice::stringIserialDesc() {
+ static uint8_t stringIserialDescriptor[] = {
+ 0x16, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ '0',0,'1',0,'2',0,'3',0,'4',0,'5',0,'6',0,'7',0,'8',0,'9',0, /*bString iSerial - 0123456789*/
+ };
+ return stringIserialDescriptor;
+}
+
+uint8_t * USBDevice::stringIConfigurationDesc() {
+ static uint8_t stringIconfigurationDescriptor[] = {
+ 0x06, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ '0',0,'1',0, /*bString iConfiguration - 01*/
+ };
+ return stringIconfigurationDescriptor;
+}
+
+uint8_t * USBDevice::stringIinterfaceDesc() {
+ static uint8_t stringIinterfaceDescriptor[] = {
+ 0x08, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ 'U',0,'S',0,'B',0, /*bString iInterface - USB*/
+ };
+ return stringIinterfaceDescriptor;
+}
+
+uint8_t * USBDevice::stringIproductDesc() {
+ static uint8_t stringIproductDescriptor[] = {
+ 0x16, /*bLength*/
+ STRING_DESCRIPTOR, /*bDescriptorType 0x03*/
+ 'U',0,'S',0,'B',0,' ',0,'D',0,'E',0,'V',0,'I',0,'C',0,'E',0 /*bString iProduct - USB DEVICE*/
+ };
+ return stringIproductDescriptor;
+}
diff -r 000000000000 -r cbe01b678bd4 HID/USBDevice.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBDevice.h Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,231 @@
+/* USBDevice.h */
+/* Generic USB device */
+/* Copyright (c) 2011 ARM Limited. All rights reserved. */
+
+#ifndef USBDEVICE_H
+#define USBDEVICE_H
+
+#include "mbed.h"
+#include "USBDevice_Types.h"
+#include "USBBusInterface.h"
+
+
+
+class USBDevice: public USBHAL
+{
+public:
+ USBDevice(uint16_t vendor_id, uint16_t product_id, uint16_t product_release);
+
+ /**
+ * Check if the device is configured
+ *
+ * @returns true if configured, false otherwise
+ */
+ bool configured(void);
+
+ /**
+ * Connect a device
+ */
+ void connect(void);
+
+ /**
+ * Disconnect a device
+ */
+ void disconnect(void);
+
+ /**
+ * Add an endpoint
+ *
+ * @param endpoint endpoint which will be added
+ * @param maxPacket Maximum size of a packet which can be sent for this endpoint
+ * @returns true if successful, false otherwise
+ */
+ bool addEndpoint(uint8_t endpoint, uint32_t maxPacket);
+
+ /**
+ * Start a reading on a certain endpoint.
+ * You can access the result of the reading by USBDevice_read
+ *
+ * @param endpoint endpoint which will be read
+ * @param maxSize the maximum length that can be read
+ * @return true if successful
+ */
+ bool readStart(uint8_t endpoint, uint16_t maxSize);
+
+ /**
+ * Read a certain endpoint. Before calling this function, USBUSBDevice_readStart
+ * must be called.
+ *
+ * Warning: blocking
+ *
+ * @param endpoint endpoint which will be read
+ * @param buffer buffer will be filled with the data received
+ * @param size the number of bytes read will be stored in *size
+ * @param maxSize the maximum length that can be read
+ * @returns true if successful
+ */
+ bool read(uint8_t endpoint, uint8_t * buffer, uint16_t * size, uint16_t maxSize);
+
+ /**
+ * Read a certain endpoint.
+ *
+ * Warning: non blocking
+ *
+ * @param endpoint endpoint which will be read
+ * @param buffer buffer will be filled with the data received (if data are available)
+ * @param size the number of bytes read will be stored in *size
+ * @param maxSize the maximum length that can be read
+ * @returns true if successful
+ */
+ bool readNB(uint8_t endpoint, uint8_t * buffer, uint16_t * size, uint16_t maxSize);
+
+ /**
+ * Write a certain endpoint.
+ *
+ * Warning: blocking
+ *
+ * @param endpoint endpoint to write
+ * @param buffer data contained in buffer will be write
+ * @param size the number of bytes to write
+ * @param maxSize the maximum length that can be written on this endpoint
+ */
+ bool write(uint8_t endpoint, uint8_t * buffer, uint16_t size, uint16_t maxSize);
+ bool writeNB(uint8_t endpoint, uint8_t * buffer, uint16_t size, uint16_t maxSize);
+
+
+ /**
+ * Called by USBDevice layer on bus reset. Warning: Called in ISR context
+ *
+ * May be used to reset state
+ */
+ virtual void USBCallback_busReset(void) {};
+
+ /**
+ * Called by USBDevice on Endpoint0 request. Warning: Called in ISR context
+ * This is used to handle extensions to standard requests
+ * and class specific requests
+ *
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_request() { return false; };
+
+ /**
+ * Called by USBDevice on Endpoint0 request completion
+ * if the 'notify' flag has been set to true. Warning: Called in ISR context
+ *
+ * In this case it is used to indicate that a HID report has
+ * been received from the host on endpoint 0
+ */
+ virtual void USBCallback_requestCompleted() {};
+
+ /**
+ * Called by USBDevice layer. Set configuration of the device.
+ * For instance, you can add all endpoints that you need on this function.
+ *
+ * @param configuration Number of the configuration
+ */
+ virtual bool USBCallback_setConfiguration(uint8_t configuration) { return false; };
+
+ /**
+ * Get device descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
+ *
+ * @returns pointer to the device descriptor
+ */
+ virtual uint8_t * deviceDesc();
+
+ /**
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc(){return NULL;};
+
+ /**
+ * Get string lang id descriptor
+ *
+ * @return pointer to the string lang id descriptor
+ */
+ virtual uint8_t * stringLangidDesc();
+
+ /**
+ * Get string manufacturer descriptor
+ *
+ * @returns pointer to the string manufacturer descriptor
+ */
+ virtual uint8_t * stringImanufacturerDesc();
+
+ /**
+ * Get string product descriptor
+ *
+ * @returns pointer to the string product descriptor
+ */
+ virtual uint8_t * stringIproductDesc();
+
+ /**
+ * Get string serial descriptor
+ *
+ * @returns pointer to the string serial descriptor
+ */
+ virtual uint8_t * stringIserialDesc();
+
+ /**
+ * Get string configuration descriptor
+ *
+ * @returns pointer to the string configuration descriptor
+ */
+ virtual uint8_t * stringIConfigurationDesc();
+
+ /**
+ * Get string interface descriptor
+ *
+ * @returns pointer to the string interface descriptor
+ */
+ virtual uint8_t * stringIinterfaceDesc();
+
+ /**
+ * Get the length of the report descriptor
+ *
+ * @returns length of the report descriptor
+ */
+ virtual uint16_t reportDescLength() { return 0; };
+
+
+
+protected:
+ virtual void busReset(void);
+ virtual void EP0setupCallback(void);
+ virtual void EP0out(void);
+ virtual void EP0in(void);
+ virtual void SOF(int frameNumber);
+ virtual void connectStateChanged(unsigned int connected);
+ virtual void suspendStateChanged(unsigned int suspended);
+ uint8_t * findDescriptor(uint8_t descriptorType);
+ CONTROL_TRANSFER * getTransferPtr(void);
+
+ uint16_t VENDOR_ID;
+ uint16_t PRODUCT_ID;
+ uint16_t PRODUCT_RELEASE;
+
+private:
+ bool addRateFeedbackEndpoint(uint8_t endpoint, uint32_t maxPacket);
+ bool requestGetDescriptor(void);
+ bool controlOut(void);
+ bool controlIn(void);
+ bool requestSetAddress(void);
+ bool requestSetConfiguration(void);
+ bool requestSetFeature(void);
+ bool requestClearFeature(void);
+ bool requestGetStatus(void);
+ bool requestSetup(void);
+ bool controlSetup(void);
+ void decodeSetupPacket(uint8_t *data, SETUP_PACKET *packet);
+ bool requestGetConfiguration(void);
+ bool requestGetInterface(void);
+ bool requestSetInterface(void);
+
+ CONTROL_TRANSFER transfer;
+ USB_DEVICE device;
+};
+
+
+#endif
diff -r 000000000000 -r cbe01b678bd4 HID/USBDevice_Types.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBDevice_Types.h Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,69 @@
+/* USBDevice_Types.h */
+/* USB Device type definitions, conversions and constants */
+/* Copyright (c) 2011 ARM Limited. All rights reserved. */
+
+#ifndef USBDEVICE_TYPES_H
+#define USBDEVICE_TYPES_H
+
+/* Standard requests */
+#define GET_STATUS (0)
+#define CLEAR_FEATURE (1)
+#define SET_FEATURE (3)
+#define SET_ADDRESS (5)
+#define GET_DESCRIPTOR (6)
+#define SET_DESCRIPTOR (7)
+#define GET_CONFIGURATION (8)
+#define SET_CONFIGURATION (9)
+#define GET_INTERFACE (10)
+#define SET_INTERFACE (11)
+
+/* bmRequestType.dataTransferDirection */
+#define HOST_TO_DEVICE (0)
+#define DEVICE_TO_HOST (1)
+
+/* bmRequestType.Type*/
+#define STANDARD_TYPE (0)
+#define CLASS_TYPE (1)
+#define VENDOR_TYPE (2)
+#define RESERVED_TYPE (3)
+
+/* bmRequestType.Recipient */
+#define DEVICE_RECIPIENT (0)
+#define INTERFACE_RECIPIENT (1)
+#define ENDPOINT_RECIPIENT (2)
+#define OTHER_RECIPIENT (3)
+
+/* Descriptors */
+#define DESCRIPTOR_TYPE(wValue) (wValue >> 8)
+#define DESCRIPTOR_INDEX(wValue) (wValue & 0xf)
+
+typedef struct {
+ struct {
+ uint8_t dataTransferDirection;
+ uint8_t Type;
+ uint8_t Recipient;
+ } bmRequestType;
+ uint8_t bRequest;
+ uint16_t wValue;
+ uint16_t wIndex;
+ uint16_t wLength;
+} SETUP_PACKET;
+
+typedef struct {
+ SETUP_PACKET setup;
+ uint8_t *ptr;
+ uint32_t remaining;
+ uint8_t direction;
+ bool zlp;
+ bool notify;
+} CONTROL_TRANSFER;
+
+typedef enum {ATTACHED, POWERED, DEFAULT, ADDRESS, CONFIGURED} DEVICE_STATE;
+
+typedef struct {
+ volatile DEVICE_STATE state;
+ uint8_t configuration;
+ bool suspended;
+} USB_DEVICE;
+
+#endif
diff -r 000000000000 -r cbe01b678bd4 HID/USBEndpoints.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBEndpoints.h Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,34 @@
+/* USBEndpoints.h */
+/* USB endpoint configuration */
+/* Copyright (c) 2011 ARM Limited. All rights reserved. */
+
+#ifndef USBENDPOINTS_H
+#define USBENDPOINTS_H
+
+/* SETUP packet size */
+#define SETUP_PACKET_SIZE (8)
+
+/* Options flags for configuring endpoints */
+#define DEFAULT_OPTIONS (0)
+#define SINGLE_BUFFERED (1U << 0)
+#define ISOCHRONOUS (1U << 1)
+#define RATE_FEEDBACK_MODE (1U << 2) /* Interrupt endpoints only */
+
+/* Endpoint transfer status, for endpoints > 0 */
+typedef enum {
+ EP_COMPLETED, /* Transfer completed */
+ EP_PENDING, /* Transfer in progress */
+ EP_INVALID, /* Invalid parameter */
+ EP_STALLED, /* Endpoint stalled */
+} EP_STATUS;
+
+/* Include configuration for specific target */
+#if defined(TARGET_LPC1768) || defined(TARGET_LPC2368)
+#include "USBEndpoints_LPC17_LPC23.h"
+#elif defined(TARGET_LPC11U24)
+#include "USBEndpoints_LPC11U.h"
+#else
+#error "Unknown target type"
+#endif
+
+#endif
diff -r 000000000000 -r cbe01b678bd4 HID/USBEndpoints_LPC11U.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/HID/USBEndpoints_LPC11U.h Sat Nov 19 22:54:22 2011 +0000 @@ -0,0 +1,51 @@ +/* USBEndpoints_LPC11U.h */ +/* Endpoint configuration for LPC11U */ +/* Copyright (c) 2011 ARM Limited. All rights reserved. */ + +#define NUMBER_OF_LOGICAL_ENDPOINTS (5) +#define NUMBER_OF_PHYSICAL_ENDPOINTS (NUMBER_OF_LOGICAL_ENDPOINTS * 2) + +/* Define physical endpoint numbers */ + +/* Endpoint No. Type(s) MaxPacket DoubleBuffer */ +/* ---------------- ------------ ---------- --- */ +#define EP0OUT (0) /* Control 64 No */ +#define EP0IN (1) /* Control 64 No */ +#define EP1OUT (2) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP1IN (3) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP2OUT (4) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP2IN (5) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP3OUT (6) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP3IN (7) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP4OUT (8) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP4IN (9) /* Int/Bulk/Iso 64/64/1023 Yes */ + +/* Maximum Packet sizes */ + +#define MAX_PACKET_SIZE_EP0 (64) +#define MAX_PACKET_SIZE_EP1 (64) /* Int/Bulk */ +#define MAX_PACKET_SIZE_EP2 (64) /* Int/Bulk */ +#define MAX_PACKET_SIZE_EP3 (64) /* Int/Bulk */ +#define MAX_PACKET_SIZE_EP4 (64) /* Int/Bulk */ + +#define MAX_PACKET_SIZE_EP1_ISO (1023) /* Isochronous */ +#define MAX_PACKET_SIZE_EP2_ISO (1023) /* Isochronous */ +#define MAX_PACKET_SIZE_EP3_ISO (1023) /* Isochronous */ +#define MAX_PACKET_SIZE_EP4_ISO (1023) /* Isochronous */ + +/* Generic endpoints - intended to be portable accross devices */ +/* and be suitable for simple USB devices. */ + +/* Bulk endpoint */ +#define EPBULK_OUT (EP2OUT) +#define EPBULK_IN (EP2IN) +/* Interrupt endpoint */ +#define EPINT_OUT (EP1OUT) +#define EPINT_IN (EP1IN) +/* Isochronous endpoint */ +#define EPISO_OUT (EP3OUT) +#define EPISO_IN (EP3IN) + +#define MAX_PACKET_SIZE_EPBULK (MAX_PACKET_SIZE_EP2) +#define MAX_PACKET_SIZE_EPINT (MAX_PACKET_SIZE_EP1) +#define MAX_PACKET_SIZE_EPISO (MAX_PACKET_SIZE_EP3_ISO)
diff -r 000000000000 -r cbe01b678bd4 HID/USBEndpoints_LPC17_LPC23.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/HID/USBEndpoints_LPC17_LPC23.h Sat Nov 19 22:54:22 2011 +0000 @@ -0,0 +1,79 @@ +/* USBEndpoints_LPC17_LPC23.h */ +/* Endpoint configuration for LPC1768 and LPC2368 */ +/* Copyright (c) 2011 ARM Limited. All rights reserved. */ + +#define NUMBER_OF_LOGICAL_ENDPOINTS (16) +#define NUMBER_OF_PHYSICAL_ENDPOINTS (NUMBER_OF_LOGICAL_ENDPOINTS * 2) + +/* Define physical endpoint numbers */ + +/* Endpoint No. Type(s) MaxPacket DoubleBuffer */ +/* ---------------- ------------ ---------- --- */ +#define EP0OUT (0) /* Control 64 No */ +#define EP0IN (1) /* Control 64 No */ +#define EP1OUT (2) /* Interrupt 64 No */ +#define EP1IN (3) /* Interrupt 64 No */ +#define EP2OUT (4) /* Bulk 64 Yes */ +#define EP2IN (5) /* Bulk 64 Yes */ +#define EP3OUT (6) /* Isochronous 1023 Yes */ +#define EP3IN (7) /* Isochronous 1023 Yes */ +#define EP4OUT (8) /* Interrupt 64 No */ +#define EP4IN (9) /* Interrupt 64 No */ +#define EP5OUT (10) /* Bulk 64 Yes */ +#define EP5IN (11) /* Bulk 64 Yes */ +#define EP6OUT (12) /* Isochronous 1023 Yes */ +#define EP6IN (13) /* Isochronous 1023 Yes */ +#define EP7OUT (14) /* Interrupt 64 No */ +#define EP7IN (15) /* Interrupt 64 No */ +#define EP8OUT (16) /* Bulk 64 Yes */ +#define EP8IN (17) /* Bulk 64 Yes */ +#define EP9OUT (18) /* Isochronous 1023 Yes */ +#define EP9IN (19) /* Isochronous 1023 Yes */ +#define EP10OUT (20) /* Interrupt 64 No */ +#define EP10IN (21) /* Interrupt 64 No */ +#define EP11OUT (22) /* Bulk 64 Yes */ +#define EP11IN (23) /* Bulk 64 Yes */ +#define EP12OUT (24) /* Isochronous 1023 Yes */ +#define EP12IN (25) /* Isochronous 1023 Yes */ +#define EP13OUT (26) /* Interrupt 64 No */ +#define EP13IN (27) /* Interrupt 64 No */ +#define EP14OUT (28) /* Bulk 64 Yes */ +#define EP14IN (29) /* Bulk 64 Yes */ +#define EP15OUT (30) /* Bulk 64 Yes */ +#define EP15IN (31) /* Bulk 64 Yes */ + +/* Maximum Packet sizes */ + +#define MAX_PACKET_SIZE_EP0 (64) +#define MAX_PACKET_SIZE_EP1 (64) +#define MAX_PACKET_SIZE_EP2 (64) +#define MAX_PACKET_SIZE_EP3 (1023) +#define MAX_PACKET_SIZE_EP4 (64) +#define MAX_PACKET_SIZE_EP5 (64) +#define MAX_PACKET_SIZE_EP6 (1023) +#define MAX_PACKET_SIZE_EP7 (64) +#define MAX_PACKET_SIZE_EP8 (64) +#define MAX_PACKET_SIZE_EP9 (1023) +#define MAX_PACKET_SIZE_EP10 (64) +#define MAX_PACKET_SIZE_EP11 (64) +#define MAX_PACKET_SIZE_EP12 (1023) +#define MAX_PACKET_SIZE_EP13 (64) +#define MAX_PACKET_SIZE_EP14 (64) +#define MAX_PACKET_SIZE_EP15 (64) + +/* Generic endpoints - intended to be portable accross devices */ +/* and be suitable for simple USB devices. */ + +/* Bulk endpoints */ +#define EPBULK_OUT (EP2OUT) +#define EPBULK_IN (EP2IN) +/* Interrupt endpoints */ +#define EPINT_OUT (EP1OUT) +#define EPINT_IN (EP1IN) +/* Isochronous endpoints */ +#define EPISO_OUT (EP3OUT) +#define EPISO_IN (EP3IN) + +#define MAX_PACKET_SIZE_EPBULK (MAX_PACKET_SIZE_EP2) +#define MAX_PACKET_SIZE_EPINT (MAX_PACKET_SIZE_EP1) +#define MAX_PACKET_SIZE_EPISO (MAX_PACKET_SIZE_EP3)
diff -r 000000000000 -r cbe01b678bd4 HID/USBHID.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBHID.cpp Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,259 @@
+// USBHID.c
+// Human Interface Device (HID) class
+// Copyright (c) 2011 ARM Limited. All rights reserved.
+
+#include "stdint.h"
+#include "USBBusInterface.h"
+#include "USBHID.h"
+
+
+USBHID::USBHID(uint8_t output_report_length, uint8_t input_report_length, uint16_t vendor_id, uint16_t product_id, uint16_t product_release): USBDevice(vendor_id, product_id, product_release)
+{
+ output_length = output_report_length;
+ input_length = input_report_length;
+}
+
+
+bool USBHID::send(HID_REPORT *report)
+{
+ return write(EPINT_IN, report->data, report->length, MAX_HID_REPORT_SIZE);
+}
+
+
+bool USBHID::read(HID_REPORT *report)
+{
+ uint16_t bytesRead = 0;
+ bool result;
+ result = USBDevice::read(EPINT_OUT, report->data, &bytesRead, MAX_HID_REPORT_SIZE);
+ if(!readStart(EPINT_OUT, MAX_HID_REPORT_SIZE))
+ return false;
+ report->length = bytesRead;
+ return result;
+}
+
+
+bool USBHID::readNB(HID_REPORT *report)
+{
+ uint16_t bytesRead = 0;
+ bool result;
+ result = USBDevice::readNB(EPINT_OUT, report->data, &bytesRead, MAX_HID_REPORT_SIZE);
+ report->length = bytesRead;
+ if(!readStart(EPINT_OUT, MAX_HID_REPORT_SIZE))
+ return false;
+ return result;
+}
+
+
+uint16_t USBHID::reportDescLength() {
+ reportDesc();
+ return reportLength;
+}
+
+
+
+//
+// Route callbacks from lower layers to class(es)
+//
+
+
+// Called in ISR context
+// Called by USBDevice on Endpoint0 request
+// This is used to handle extensions to standard requests
+// and class specific requests
+// Return true if class handles this request
+bool USBHID::USBCallback_request() {
+ bool success = false;
+ CONTROL_TRANSFER * transfer = getTransferPtr();
+ uint8_t *hidDescriptor;
+
+ // Process additional standard requests
+
+ if ((transfer->setup.bmRequestType.Type == STANDARD_TYPE))
+ {
+ switch (transfer->setup.bRequest)
+ {
+ case GET_DESCRIPTOR:
+ switch (DESCRIPTOR_TYPE(transfer->setup.wValue))
+ {
+ case REPORT_DESCRIPTOR:
+ if ((reportDesc() != NULL) \
+ && (reportDescLength() != 0))
+ {
+ transfer->remaining = reportDescLength();
+ transfer->ptr = reportDesc();
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ }
+ break;
+ case HID_DESCRIPTOR:
+ // Find the HID descriptor, after the configuration descriptor
+ hidDescriptor = findDescriptor(HID_DESCRIPTOR);
+ if (hidDescriptor != NULL)
+ {
+ transfer->remaining = HID_DESCRIPTOR_LENGTH;
+ transfer->ptr = hidDescriptor;
+ transfer->direction = DEVICE_TO_HOST;
+ success = true;
+ }
+ break;
+
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ // Process class-specific requests
+
+ if (transfer->setup.bmRequestType.Type == CLASS_TYPE)
+ {
+ switch (transfer->setup.bRequest)
+ {
+ case SET_REPORT:
+ // First byte will be used for report ID
+ outputReport.data[0] = transfer->setup.wValue & 0xff;
+ outputReport.length = transfer->setup.wLength + 1;
+
+ transfer->remaining = sizeof(outputReport.data) - 1;
+ transfer->ptr = &outputReport.data[1];
+ transfer->direction = HOST_TO_DEVICE;
+ transfer->notify = true;
+ success = true;
+ default:
+ break;
+ }
+ }
+
+ return success;
+}
+
+
+// Called in ISR context
+// Called by USBDevice on Endpoint0 request completion
+// if the 'notify' flag has been set to true
+// In this case it is used to indicate that a HID report has
+// been received from the host on endpoint 0
+void USBHID::USBCallback_requestCompleted() {
+ HID_callbackSetReport(&outputReport);
+}
+
+#define DEFAULT_CONFIGURATION (1)
+
+
+// Called in ISR context
+// Set configuration. Return false if the
+// configuration is not supported
+bool USBHID::USBCallback_setConfiguration(uint8_t configuration) {
+ if (configuration != DEFAULT_CONFIGURATION) {
+ return false;
+ }
+
+ // Configure endpoints > 0
+ addEndpoint(EPINT_IN, MAX_PACKET_SIZE_EPINT);
+ addEndpoint(EPINT_OUT, MAX_PACKET_SIZE_EPINT);
+
+ // We activate the endpoint to be able to recceive data
+ readStart(EPINT_OUT, MAX_PACKET_SIZE_EPINT);
+ return true;
+}
+
+uint8_t * USBHID::stringIinterfaceDesc() {
+ static uint8_t stringIinterfaceDescriptor[] = {
+ 0x08, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'H',0,'I',0,'D',0, //bString iInterface - HID
+ };
+ return stringIinterfaceDescriptor;
+}
+
+uint8_t * USBHID::stringIproductDesc() {
+ static uint8_t stringIproductDescriptor[] = {
+ 0x16, //bLength
+ STRING_DESCRIPTOR, //bDescriptorType 0x03
+ 'H',0,'I',0,'D',0,' ',0,'D',0,'E',0,'V',0,'I',0,'C',0,'E',0 //bString iProduct - HID device
+ };
+ return stringIproductDescriptor;
+}
+
+
+
+uint8_t * USBHID::reportDesc() {
+ static uint8_t reportDescriptor[] = {
+ 0x06, LSB(0xFFAB), MSB(0xFFAB),
+ 0x0A, LSB(0x0200), MSB(0x0200),
+ 0xA1, 0x01, // Collection 0x01
+ 0x75, 0x08, // report size = 8 bits
+ 0x15, 0x00, // logical minimum = 0
+ 0x26, 0xFF, 0x00, // logical maximum = 255
+ 0x95, input_length, // report count
+ 0x09, 0x01, // usage
+ 0x81, 0x02, // Input (array)
+ 0x95, output_length, // report count
+ 0x09, 0x02, // usage
+ 0x91, 0x02, // Output (array)
+ 0xC0 // end collection
+
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+}
+
+#define DEFAULT_CONFIGURATION (1)
+#define TOTAL_DESCRIPTOR_LENGTH ((1 * CONFIGURATION_DESCRIPTOR_LENGTH) \
+ + (1 * INTERFACE_DESCRIPTOR_LENGTH) \
+ + (1 * HID_DESCRIPTOR_LENGTH) \
+ + (2 * ENDPOINT_DESCRIPTOR_LENGTH))
+
+uint8_t * USBHID::configurationDesc() {
+ static uint8_t configurationDescriptor[] = {
+ CONFIGURATION_DESCRIPTOR_LENGTH,// bLength
+ CONFIGURATION_DESCRIPTOR, // bDescriptorType
+ LSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (LSB)
+ MSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (MSB)
+ 0x01, // bNumInterfaces
+ DEFAULT_CONFIGURATION, // bConfigurationValue
+ 0x00, // iConfiguration
+ C_RESERVED | C_SELF_POWERED, // bmAttributes
+ C_POWER(0), // bMaxPower
+
+ INTERFACE_DESCRIPTOR_LENGTH, // bLength
+ INTERFACE_DESCRIPTOR, // bDescriptorType
+ 0x00, // bInterfaceNumber
+ 0x00, // bAlternateSetting
+ 0x02, // bNumEndpoints
+ HID_CLASS, // bInterfaceClass
+ HID_SUBCLASS_NONE, // bInterfaceSubClass
+ HID_PROTOCOL_NONE, // bInterfaceProtocol
+ 0x00, // iInterface
+
+ HID_DESCRIPTOR_LENGTH, // bLength
+ HID_DESCRIPTOR, // bDescriptorType
+ LSB(HID_VERSION_1_11), // bcdHID (LSB)
+ MSB(HID_VERSION_1_11), // bcdHID (MSB)
+ 0x00, // bCountryCode
+ 0x01, // bNumDescriptors
+ REPORT_DESCRIPTOR, // bDescriptorType
+ LSB(this->reportDescLength()), // wDescriptorLength (LSB)
+ MSB(this->reportDescLength()), // wDescriptorLength (MSB)
+
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_IN), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 10, // bInterval (milliseconds)
+
+ ENDPOINT_DESCRIPTOR_LENGTH, // bLength
+ ENDPOINT_DESCRIPTOR, // bDescriptorType
+ PHY_TO_DESC(EPINT_OUT), // bEndpointAddress
+ E_INTERRUPT, // bmAttributes
+ LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB)
+ MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB)
+ 10, // bInterval (milliseconds)
+ };
+ return configurationDescriptor;
+}
diff -r 000000000000 -r cbe01b678bd4 HID/USBHID.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBHID.h Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,158 @@
+/* USBHID.h */
+/* Human Interface Device (HID) class */
+/* Copyright (c) 2011 ARM Limited. All rights reserved. */
+
+#ifndef USB_HID_H
+#define USB_HID_H
+
+/* These headers are included for child class. */
+#include "USBEndpoints.h"
+#include "USBDescriptor.h"
+#include "USBDevice_Types.h"
+
+#include "USBHID_Types.h"
+#include "USBDevice.h"
+
+
+/**
+ * USBHID example
+ * @code
+ * #include "mbed.h"
+ * #include "USBHID.h"
+ *
+ * USBHID hid;
+ * HID_REPORT recv;
+ * BusOut leds(LED1,LED2,LED3,LED4);
+ *
+ * int main(void) {
+ * while (1) {
+ * hid.read(&recv);
+ * leds = recv.data[0];
+ * }
+ * }
+ * @endcode
+ */
+
+class USBHID: public USBDevice {
+public:
+
+ /**
+ * Constructor
+ *
+ * @param output_report_length Maximum length of a sent report (up to 64 bytes) (default: 64 bytes)
+ * @param input_report_length Maximum length of a received report (up to 64 bytes) (default: 64 bytes)
+ * @param vendor_id Your vendor_id
+ * @param product_id Your product_id
+ * @param product_release Your preoduct_release
+ */
+ USBHID(uint8_t output_report_length = 64, uint8_t input_report_length = 64, uint16_t vendor_id = 0x1234, uint16_t product_id = 0x0006, uint16_t product_release = 0x0001);
+
+
+ /**
+ * Send a Report
+ *
+ * @param report Report which will be sent (a report is defined by all data and the length)
+ * @returns true if successful
+ */
+ bool send(HID_REPORT *report);
+
+ /**
+ * Read a report. Warning: blocking
+ *
+ * @param report pointer to the report to fill
+ * @returns true if successful
+ */
+ bool read(HID_REPORT * report);
+
+ /**
+ * Read a report. Warning: non blocking
+ *
+ * @param report pointer to the report to fill
+ * @returns true if successful
+ */
+ bool readNB(HID_REPORT * report);
+
+ /**
+ * Get the Report descriptor
+ *
+ * @returns pointer to the report descriptor
+ */
+ virtual uint8_t * reportDesc();
+
+ /**
+ * Get the length of the report descriptor
+ *
+ * @returns the length of the report descriptor
+ */
+ virtual uint16_t reportDescLength();
+
+ /**
+ * Get string product descriptor
+ *
+ * @returns pointer to the string product descriptor
+ */
+ virtual uint8_t * stringIproductDesc();
+
+ /**
+ * Get string interface descriptor
+ *
+ * @returns pointer to the string interface descriptor
+ */
+ virtual uint8_t * stringIinterfaceDesc();
+
+ /**
+ * Get configuration descriptor
+ *
+ * @returns pointer to the configuration descriptor
+ */
+ virtual uint8_t * configurationDesc();
+
+
+ /**
+ * HID Report received by SET_REPORT request. Warning: Called in ISR context
+ * First byte of data will be the report ID
+ *
+ * @param report Data and length received
+ */
+ virtual void HID_callbackSetReport(HID_REPORT *report){};
+
+
+ /**
+ * Called by USBDevice on Endpoint0 request. Warning: Called in ISR context
+ * This is used to handle extensions to standard requests
+ * and class specific requests
+ *
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_request();
+
+ /**
+ * Called by USBDevice on Endpoint0 request completion
+ * if the 'notify' flag has been set to true. Warning: Called in ISR context
+ *
+ * In this case it is used to indicate that a HID report has
+ * been received from the host on endpoint 0
+ */
+ virtual void USBCallback_requestCompleted();
+
+ /**
+ * Called by USBDevice layer. Set configuration of the device.
+ * For instance, you can add all endpoints that you need on this function.
+ *
+ * @param configuration Number of the configuration
+ * @returns true if class handles this request
+ */
+ virtual bool USBCallback_setConfiguration(uint8_t configuration);
+
+
+
+protected:
+ uint16_t reportLength;
+
+private:
+ HID_REPORT outputReport;
+ uint8_t output_length;
+ uint8_t input_length;
+};
+
+#endif
diff -r 000000000000 -r cbe01b678bd4 HID/USBHID_Types.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBHID_Types.h Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,77 @@
+/* USBClass_HID_Types.h */
+/* USB HID class type definitions, conversions and constants */
+/* Copyright (c) 2011 ARM Limited. All rights reserved. */
+
+#ifndef USBCLASS_HID_TYPES
+#define USBCLASS_HID_TYPES
+
+#include <stdint.h>
+
+/* */
+#define HID_VERSION_1_11 (0x0111)
+
+/* HID Class */
+#define HID_CLASS (3)
+#define HID_SUBCLASS_NONE (0)
+#define HID_PROTOCOL_NONE (0)
+
+/* Descriptors */
+#define HID_DESCRIPTOR (33)
+#define HID_DESCRIPTOR_LENGTH (0x09)
+#define REPORT_DESCRIPTOR (34)
+
+/* Class requests */
+#define GET_REPORT (0x1)
+#define GET_IDLE (0x2)
+#define SET_REPORT (0x9)
+#define SET_IDLE (0xa)
+
+/* HID Class Report Descriptor */
+/* Short items: size is 0, 1, 2 or 3 specifying 0, 1, 2 or 4 (four) bytes */
+/* of data as per HID Class standard */
+
+/* Main items */
+#define INPUT(size) (0x80 | size)
+#define OUTPUT(size) (0x90 | size)
+#define FEATURE(size) (0xb0 | size)
+#define COLLECTION(size) (0xa0 | size)
+#define END_COLLECTION(size) (0xc0 | size)
+
+/* Global items */
+#define USAGE_PAGE(size) (0x04 | size)
+#define LOGICAL_MINIMUM(size) (0x14 | size)
+#define LOGICAL_MAXIMUM(size) (0x24 | size)
+#define PHYSICAL_MINIMUM(size) (0x34 | size)
+#define PHYSICAL_MAXIMUM(size) (0x44 | size)
+#define UNIT_EXPONENT(size) (0x54 | size)
+#define UNIT(size) (0x64 | size)
+#define REPORT_SIZE(size) (0x74 | size)
+#define REPORT_ID(size) (0x84 | size)
+#define REPORT_COUNT(size) (0x94 | size)
+#define PUSH(size) (0xa4 | size)
+#define POP(size) (0xb4 | size)
+
+/* Local items */
+#define USAGE(size) (0x08 | size)
+#define USAGE_MINIMUM(size) (0x18 | size)
+#define USAGE_MAXIMUM(size) (0x28 | size)
+#define DESIGNATOR_INDEX(size) (0x38 | size)
+#define DESIGNATOR_MINIMUM(size) (0x48 | size)
+#define DESIGNATOR_MAXIMUM(size) (0x58 | size)
+#define STRING_INDEX(size) (0x78 | size)
+#define STRING_MINIMUM(size) (0x88 | size)
+#define STRING_MAXIMUM(size) (0x98 | size)
+#define DELIMITER(size) (0xa8 | size)
+
+/* HID Report */
+/* Where report IDs are used the first byte of 'data' will be the */
+/* report ID and 'length' will include this report ID byte. */
+
+#define MAX_HID_REPORT_SIZE (64)
+
+typedef struct {
+ uint32_t length;
+ uint8_t data[MAX_HID_REPORT_SIZE];
+} HID_REPORT;
+
+#endif
diff -r 000000000000 -r cbe01b678bd4 HID/USBKeyboard.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBKeyboard.cpp Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,455 @@
+// USBKeyboard.c
+// USB device example: Standard keyboard
+// Copyright (c) 2011 ARM Limited. All rights reserved.
+
+#include "stdint.h"
+
+#include "USBKeyboard.h"
+
+#define REPORT_ID_KEYBOARD 1
+#define REPORT_ID_VOLUME 3
+
+/* Modifiers */
+enum MODIFIER_KEY
+{
+ KEY_CTRL = 1,
+ KEY_SHIFT = 2,
+ KEY_ALT = 4,
+};
+
+typedef struct {
+ unsigned char usage;
+ unsigned char modifier;
+} KEYMAP;
+
+#ifdef US_KEYBOARD
+/* US keyboard (as HID standard) */
+#define KEYMAP_SIZE (145)
+const KEYMAP keymap[KEYMAP_SIZE] = {
+{0, 0}, /* NUL */
+{0, 0}, /* SOH */
+{0, 0}, /* STX */
+{0, 0}, /* ETX */
+{0, 0}, /* EOT */
+{0, 0}, /* ENQ */
+{0, 0}, /* ACK */
+{0, 0}, /* BEL */
+{0x2a, 0}, /* BS */ /* Keyboard Delete (Backspace) */
+{0x2b, 0}, /* TAB */ /* Keyboard Tab */
+{0x28, 0}, /* LF */ /* Keyboard Return (Enter) */
+{0, 0}, /* VT */
+{0, 0}, /* FF */
+{0, 0}, /* CR */
+{0, 0}, /* SO */
+{0, 0}, /* SI */
+{0, 0}, /* DEL */
+{0, 0}, /* DC1 */
+{0, 0}, /* DC2 */
+{0, 0}, /* DC3 */
+{0, 0}, /* DC4 */
+{0, 0}, /* NAK */
+{0, 0}, /* SYN */
+{0, 0}, /* ETB */
+{0, 0}, /* CAN */
+{0, 0}, /* EM */
+{0, 0}, /* SUB */
+{0, 0}, /* ESC */
+{0, 0}, /* FS */
+{0, 0}, /* GS */
+{0, 0}, /* RS */
+{0, 0}, /* US */
+{0x2c, 0}, /* */
+{0x1e, KEY_SHIFT}, /* ! */
+{0x34, KEY_SHIFT}, /* " */
+{0x20, KEY_SHIFT}, /* # */
+{0x21, KEY_SHIFT}, /* $ */
+{0x22, KEY_SHIFT}, /* % */
+{0x24, KEY_SHIFT}, /* & */
+{0x34, 0}, /* ' */
+{0x26, KEY_SHIFT}, /* ( */
+{0x27, KEY_SHIFT}, /* ) */
+{0x25, KEY_SHIFT}, /* * */
+{0x2e, KEY_SHIFT}, /* + */
+{0x36, 0}, /* , */
+{0x2d, 0}, /* - */
+{0x37, 0}, /* . */
+{0x38, 0}, /* / */
+{0x27, 0}, /* 0 */
+{0x1e, 0}, /* 1 */
+{0x1f, 0}, /* 2 */
+{0x20, 0}, /* 3 */
+{0x21, 0}, /* 4 */
+{0x22, 0}, /* 5 */
+{0x23, 0}, /* 6 */
+{0x24, 0}, /* 7 */
+{0x25, 0}, /* 8 */
+{0x26, 0}, /* 9 */
+{0x33, KEY_SHIFT}, /* : */
+{0x33, 0}, /* ; */
+{0x36, KEY_SHIFT}, /* < */
+{0x2e, 0}, /* = */
+{0x37, KEY_SHIFT}, /* > */
+{0x38, KEY_SHIFT}, /* ? */
+{0x1f, KEY_SHIFT}, /* @ */
+{0x04, KEY_SHIFT}, /* A */
+{0x05, KEY_SHIFT}, /* B */
+{0x06, KEY_SHIFT}, /* C */
+{0x07, KEY_SHIFT}, /* D */
+{0x08, KEY_SHIFT}, /* E */
+{0x09, KEY_SHIFT}, /* F */
+{0x0a, KEY_SHIFT}, /* G */
+{0x0b, KEY_SHIFT}, /* H */
+{0x0c, KEY_SHIFT}, /* I */
+{0x0d, KEY_SHIFT}, /* J */
+{0x0e, KEY_SHIFT}, /* K */
+{0x0f, KEY_SHIFT}, /* L */
+{0x10, KEY_SHIFT}, /* M */
+{0x11, KEY_SHIFT}, /* N */
+{0x12, KEY_SHIFT}, /* O */
+{0x13, KEY_SHIFT}, /* P */
+{0x14, KEY_SHIFT}, /* Q */
+{0x15, KEY_SHIFT}, /* R */
+{0x16, KEY_SHIFT}, /* S */
+{0x17, KEY_SHIFT}, /* T */
+{0x18, KEY_SHIFT}, /* U */
+{0x19, KEY_SHIFT}, /* V */
+{0x1a, KEY_SHIFT}, /* W */
+{0x1b, KEY_SHIFT}, /* X */
+{0x1c, KEY_SHIFT}, /* Y */
+{0x1d, KEY_SHIFT}, /* Z */
+{0x2f, 0}, /* [ */
+{0x31, 0}, /* \ */
+{0x30, 0}, /* ] */
+{0x23, KEY_SHIFT}, /* ^ */
+{0x2d, KEY_SHIFT}, /* _ */
+{0x35, 0}, /* ` */
+{0x04, 0}, /* a */
+{0x05, 0}, /* b */
+{0x06, 0}, /* c */
+{0x07, 0}, /* d */
+{0x08, 0}, /* e */
+{0x09, 0}, /* f */
+{0x0a, 0}, /* g */
+{0x0b, 0}, /* h */
+{0x0c, 0}, /* i */
+{0x0d, 0}, /* j */
+{0x0e, 0}, /* k */
+{0x0f, 0}, /* l */
+{0x10, 0}, /* m */
+{0x11, 0}, /* n */
+{0x12, 0}, /* o */
+{0x13, 0}, /* p */
+{0x14, 0}, /* q */
+{0x15, 0}, /* r */
+{0x16, 0}, /* s */
+{0x17, 0}, /* t */
+{0x18, 0}, /* u */
+{0x19, 0}, /* v */
+{0x1a, 0}, /* w */
+{0x1b, 0}, /* x */
+{0x1c, 0}, /* y */
+{0x1d, 0}, /* z */
+{0x2f, KEY_SHIFT}, /* { */
+{0x31, KEY_SHIFT}, /* | */
+{0x30, KEY_SHIFT}, /* } */
+{0x35, KEY_SHIFT}, /* ~ */
+{0,0}, /* DEL */
+
+{0x3a, 0}, /* F1 */
+{0x3b, 0}, /* F2 */
+{0x3c, 0}, /* F3 */
+{0x3d, 0}, /* F4 */
+{0x3e, 0}, /* F5 */
+{0x3f, 0}, /* F6 */
+{0x40, 0}, /* F7 */
+{0x41, 0}, /* F8 */
+{0x42, 0}, /* F9 */
+{0x43, 0}, /* F10 */
+{0x44, 0}, /* F11 */
+{0x45, 0}, /* F12 */
+
+{0x46, 0}, /* PRINT_SCREEN */
+{0x49, 0}, /* INSERT */
+{0x4a, 0}, /* HOME */
+{0x4b, 0}, /* PAGE_UP */
+{0x4e, 0}, /* PAGE_DOWN */
+};
+
+#else
+/* UK keyboard */
+#define KEYMAP_SIZE (145)
+const KEYMAP keymap[KEYMAP_SIZE] = {
+{0, 0}, /* NUL */
+{0, 0}, /* SOH */
+{0, 0}, /* STX */
+{0, 0}, /* ETX */
+{0, 0}, /* EOT */
+{0, 0}, /* ENQ */
+{0, 0}, /* ACK */
+{0, 0}, /* BEL */
+{0x2a, 0}, /* BS */ /* Keyboard Delete (Backspace) */
+{0x2b, 0}, /* TAB */ /* Keyboard Tab */
+{0x28, 0}, /* LF */ /* Keyboard Return (Enter) */
+{0, 0}, /* VT */
+{0, 0}, /* FF */
+{0, 0}, /* CR */
+{0, 0}, /* SO */
+{0, 0}, /* SI */
+{0, 0}, /* DEL */
+{0, 0}, /* DC1 */
+{0, 0}, /* DC2 */
+{0, 0}, /* DC3 */
+{0, 0}, /* DC4 */
+{0, 0}, /* NAK */
+{0, 0}, /* SYN */
+{0, 0}, /* ETB */
+{0, 0}, /* CAN */
+{0, 0}, /* EM */
+{0, 0}, /* SUB */
+{0, 0}, /* ESC */
+{0, 0}, /* FS */
+{0, 0}, /* GS */
+{0, 0}, /* RS */
+{0, 0}, /* US */
+{0x2c, 0}, /* */
+{0x1e, KEY_SHIFT}, /* ! */
+{0x1f, KEY_SHIFT}, /* " */
+{0x32, 0}, /* # */
+{0x21, KEY_SHIFT}, /* $ */
+{0x22, KEY_SHIFT}, /* % */
+{0x24, KEY_SHIFT}, /* & */
+{0x34, 0}, /* ' */
+{0x26, KEY_SHIFT}, /* ( */
+{0x27, KEY_SHIFT}, /* ) */
+{0x25, KEY_SHIFT}, /* * */
+{0x2e, KEY_SHIFT}, /* + */
+{0x36, 0}, /* , */
+{0x2d, 0}, /* - */
+{0x37, 0}, /* . */
+{0x38, 0}, /* / */
+{0x27, 0}, /* 0 */
+{0x1e, 0}, /* 1 */
+{0x1f, 0}, /* 2 */
+{0x20, 0}, /* 3 */
+{0x21, 0}, /* 4 */
+{0x22, 0}, /* 5 */
+{0x23, 0}, /* 6 */
+{0x24, 0}, /* 7 */
+{0x25, 0}, /* 8 */
+{0x26, 0}, /* 9 */
+{0x33, KEY_SHIFT}, /* : */
+{0x33, 0}, /* ; */
+{0x36, KEY_SHIFT}, /* < */
+{0x2e, 0}, /* = */
+{0x37, KEY_SHIFT}, /* > */
+{0x38, KEY_SHIFT}, /* ? */
+{0x34, KEY_SHIFT}, /* @ */
+{0x04, KEY_SHIFT}, /* A */
+{0x05, KEY_SHIFT}, /* B */
+{0x06, KEY_SHIFT}, /* C */
+{0x07, KEY_SHIFT}, /* D */
+{0x08, KEY_SHIFT}, /* E */
+{0x09, KEY_SHIFT}, /* F */
+{0x0a, KEY_SHIFT}, /* G */
+{0x0b, KEY_SHIFT}, /* H */
+{0x0c, KEY_SHIFT}, /* I */
+{0x0d, KEY_SHIFT}, /* J */
+{0x0e, KEY_SHIFT}, /* K */
+{0x0f, KEY_SHIFT}, /* L */
+{0x10, KEY_SHIFT}, /* M */
+{0x11, KEY_SHIFT}, /* N */
+{0x12, KEY_SHIFT}, /* O */
+{0x13, KEY_SHIFT}, /* P */
+{0x14, KEY_SHIFT}, /* Q */
+{0x15, KEY_SHIFT}, /* R */
+{0x16, KEY_SHIFT}, /* S */
+{0x17, KEY_SHIFT}, /* T */
+{0x18, KEY_SHIFT}, /* U */
+{0x19, KEY_SHIFT}, /* V */
+{0x1a, KEY_SHIFT}, /* W */
+{0x1b, KEY_SHIFT}, /* X */
+{0x1c, KEY_SHIFT}, /* Y */
+{0x1d, KEY_SHIFT}, /* Z */
+{0x2f, 0}, /* [ */
+{0x64, 0}, /* \ */
+{0x30, 0}, /* ] */
+{0x23, KEY_SHIFT}, /* ^ */
+{0x2d, KEY_SHIFT}, /* _ */
+{0x35, 0}, /* ` */
+{0x04, 0}, /* a */
+{0x05, 0}, /* b */
+{0x06, 0}, /* c */
+{0x07, 0}, /* d */
+{0x08, 0}, /* e */
+{0x09, 0}, /* f */
+{0x0a, 0}, /* g */
+{0x0b, 0}, /* h */
+{0x0c, 0}, /* i */
+{0x0d, 0}, /* j */
+{0x0e, 0}, /* k */
+{0x0f, 0}, /* l */
+{0x10, 0}, /* m */
+{0x11, 0}, /* n */
+{0x12, 0}, /* o */
+{0x13, 0}, /* p */
+{0x14, 0}, /* q */
+{0x15, 0}, /* r */
+{0x16, 0}, /* s */
+{0x17, 0}, /* t */
+{0x18, 0}, /* u */
+{0x19, 0}, /* v */
+{0x1a, 0}, /* w */
+{0x1b, 0}, /* x */
+{0x1c, 0}, /* y */
+{0x1d, 0}, /* z */
+{0x2f, KEY_SHIFT}, /* { */
+{0x64, KEY_SHIFT}, /* | */
+{0x30, KEY_SHIFT}, /* } */
+{0x32, KEY_SHIFT}, /* ~ */
+{0,0}, /* DEL */
+
+{0x3a, 0}, /* F1 */
+{0x3b, 0}, /* F2 */
+{0x3c, 0}, /* F3 */
+{0x3d, 0}, /* F4 */
+{0x3e, 0}, /* F5 */
+{0x3f, 0}, /* F6 */
+{0x40, 0}, /* F7 */
+{0x41, 0}, /* F8 */
+{0x42, 0}, /* F9 */
+{0x43, 0}, /* F10 */
+{0x44, 0}, /* F11 */
+{0x45, 0}, /* F12 */
+
+{0x46, 0}, /* PRINT_SCREEN */
+{0x49, 0}, /* INSERT */
+{0x4a, 0}, /* HOME */
+{0x4b, 0}, /* PAGE_UP */
+{0x4e, 0}, /* PAGE_DOWN */
+};
+#endif
+
+uint8_t * USBKeyboard::reportDesc() {
+ static uint8_t reportDescriptor[] = {
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x06, // Keyboard
+ COLLECTION(1), 0x01, // Application
+ REPORT_ID(1), REPORT_ID_KEYBOARD,
+
+ USAGE_PAGE(1), 0x07, // Key Codes
+ USAGE_MINIMUM(1), 0xE0,
+ USAGE_MAXIMUM(1), 0xE7,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x08,
+ INPUT(1), 0x02, // Data, Variable, Absolute
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x08,
+ INPUT(1), 0x01, // Constant
+ REPORT_COUNT(1), 0x05,
+ REPORT_SIZE(1), 0x01,
+
+
+ USAGE_PAGE(1), 0x08, // LEDs
+ USAGE_MINIMUM(1), 0x01,
+ USAGE_MAXIMUM(1), 0x05,
+ OUTPUT(1), 0x02, // Data, Variable, Absolute
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x03,
+ OUTPUT(1), 0x01, // Constant
+ REPORT_COUNT(1), 0x06,
+ REPORT_SIZE(1), 0x08,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x65,
+
+
+ USAGE_PAGE(1), 0x07, // Key Codes
+ USAGE_MINIMUM(1), 0x00,
+ USAGE_MAXIMUM(1), 0x65,
+ INPUT(1), 0x00, // Data, Array
+ END_COLLECTION(0),
+
+ // Media Control
+ USAGE_PAGE(1), 0x0C,
+ USAGE(1), 0x01,
+ COLLECTION(1), 0x01,
+ REPORT_ID(1), REPORT_ID_VOLUME,
+ USAGE_PAGE(1), 0x0C,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x07,
+ USAGE(1), 0xB5, // Next Track
+ USAGE(1), 0xB6, // Previous Track
+ USAGE(1), 0xB7, // Stop
+ USAGE(1), 0xCD, // Play / Pause
+ USAGE(1), 0xE2, // Mute
+ USAGE(1), 0xE9, // Volume Up
+ USAGE(1), 0xEA, // Volume Down
+ INPUT(1), 0x02, // Input (Data, Variable, Absolute)
+ REPORT_COUNT(1), 0x01,
+ INPUT(1), 0x01,
+ END_COLLECTION(0),
+
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+}
+
+int USBKeyboard::_putc(int c) {
+ return keyCode(c, keymap[c].modifier);
+}
+
+bool USBKeyboard::keyCode(uint8_t key, uint8_t modifier) {
+ // Send a simulated keyboard keypress. Returns true if successful.
+
+ HID_REPORT report;
+
+ report.data[0] = REPORT_ID_KEYBOARD;
+ report.data[1] = modifier;
+ report.data[2] = 0;
+ report.data[3] = keymap[key].usage;
+ report.data[4] = 0;
+ report.data[5] = 0;
+ report.data[6] = 0;
+ report.data[7] = 0;
+ report.data[8] = 0;
+
+ report.length = 9;
+
+ if (!send(&report)) {
+ return false;
+ }
+
+ report.data[1] = 0;
+ report.data[3] = 0;
+
+ if (!send(&report)) {
+ return false;
+ }
+
+ return true;
+
+}
+
+
+bool USBKeyboard::mediaControl(MEDIA_KEY key) {
+ HID_REPORT report;
+
+ report.data[0] = REPORT_ID_VOLUME;
+ report.data[1] = (1 << key) & 0x7f;
+
+ report.length = 2;
+
+ send(&report);
+
+ report.data[0] = REPORT_ID_VOLUME;
+ report.data[1] = 0;
+
+ report.length = 2;
+
+ return send(&report);
+}
+
+
diff -r 000000000000 -r cbe01b678bd4 HID/USBKeyboard.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBKeyboard.h Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,125 @@
+/* USBKeyboard.h */
+/* USB device example: Standard keyboard */
+/* Copyright (c) 2011 ARM Limited. All rights reserved. */
+
+#ifndef USBKEYBOARD_H
+#define USBKEYBOARD_H
+
+#include "USBHID.h"
+#include "Stream.h"
+
+
+enum MEDIA_KEY
+{
+ KEY_NEXT_TRACK, /*!< next Track Button */
+ KEY_PREVIOUS_TRACK, /*!< Previous track Button */
+ KEY_STOP, /*!< Stop Button */
+ KEY_PLAY_PAUSE, /*!< Play/Pause Button */
+ KEY_MUTE, /*!< Mute Button */
+ KEY_VOLUME_UP, /*!< Volume Up Button */
+ KEY_VOLUME_DOWN, /*!< Volume Down Button */
+};
+
+enum FUNCTION_KEY
+{
+ KEY_F1 = 128, /* F1 key */
+ KEY_F2, /* F2 key */
+ KEY_F3, /* F3 key */
+ KEY_F4, /* F4 key */
+ KEY_F5, /* F5 key */
+ KEY_F6, /* F6 key */
+ KEY_F7, /* F7 key */
+ KEY_F8, /* F8 key */
+ KEY_F9, /* F9 key */
+ KEY_F10, /* F10 key */
+ KEY_F11, /* F11 key */
+ KEY_F12, /* F12 key */
+ KEY_PRINT_SCREEN, /* Print Screen key */
+ KEY_INSERT, /* Insert key */
+ KEY_HOME, /* Home key */
+ KEY_PAGE_UP, /* Page Up key */
+ KEY_PAGE_DOWN, /* Page Down key */
+};
+
+/** USB device: a keyboard
+ *
+ * Warning: you can only instantiate one instance of a USB device: USBMouse, USBKeyboard, USBAbsMouse, USBMouseKeyboard, or USBAbsMouseKeyboard.
+ *
+ * Example:
+ * @code
+ *
+ * #include "mbed.h"
+ * #include "USBKeyboard.h"
+ *
+ * USBKeyboard key;
+ *
+ * int main(void)
+ * {
+ * while (1)
+ * {
+ * key.puts("Hello World\r\n");
+ * wait(1);
+ * }
+ * }
+ *
+ * @endcode
+ */
+class USBKeyboard: public USBHID, public Stream
+{
+ public:
+
+ /**
+ * Constructor
+ *
+ * @param vendor_id Your vendor_id (default: 0x1234)
+ * @param product_id Your product_id (default: 0x0001)
+ * @param product_release Your preoduct_release (default: 0x0001)
+ *
+ */
+ USBKeyboard(uint16_t vendor_id = 0x1234, uint16_t product_id = 0x0003, uint16_t product_release = 0x0001): USBHID(vendor_id, product_id, product_release){};
+
+ /**
+ * To send a character defined by a modifier(CTRL, SHIFT, ALT) and the key
+ *
+ * @code
+ * //To send CTRL + s (save)
+ * keyboard.keyCode('s', KEY_CTRL);
+ * @endcode
+ *
+ * @param modifier bit 0: CTRL, bit 1: SHIFT, bit 2: ALT (default: 0)
+ * @param key character to send
+ * @returns true if there is no error, false otherwise
+ */
+ bool keyCode(uint8_t key, uint8_t modifier = 0);
+
+ /**
+ * Send a character
+ *
+ * @param c character to be sent
+ * @returns true if there is no error, false otherwise
+ */
+ virtual int _putc(int c);
+
+ /**
+ * Control media keys
+ *
+ * @param key media key pressed (KEY_NEXT_TRACK, KEY_PREVIOUS_TRACK, KEY_STOP, KEY_PLAY_PAUSE, KEY_MUTE, KEY_VOLUME_UP, KEY_VOLUME_DOWN)
+ * @returns true if there is no error, false otherwise
+ */
+ bool mediaControl(MEDIA_KEY key);
+
+ /**
+ * To define the report descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
+ *
+ * @returns pointer to the report descriptor
+ */
+ virtual uint8_t * reportDesc();
+
+ private:
+ //dummy otherwise it doesn,t compile (we must define all methods of an abstract class)
+ virtual int _getc() { return -1;}
+};
+
+#endif
+
+
diff -r 000000000000 -r cbe01b678bd4 HID/USBMouse.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBMouse.cpp Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,176 @@
+// USBMouse.c
+// USB device example: Relative mouse
+// Copyright (c) 2011 ARM Limited. All rights reserved.
+
+#include "stdint.h"
+#include "USBMouse.h"
+
+bool USBMouse::update(int16_t x, int16_t y, uint8_t button, int8_t z) {
+ switch (mouse_type) {
+ case REL_MOUSE:
+ while (x > 127) {
+ if (!mouseSend(127, 0, button, z)) return false;
+ x = x - 127;
+ }
+ while (x < -128) {
+ if (!mouseSend(-128, 0, button, z)) return false;
+ x = x + 128;
+ }
+ while (y > 127) {
+ if (!mouseSend(0, 127, button, z)) return false;
+ y = y - 127;
+ }
+ while (y < -128) {
+ if (!mouseSend(0, -128, button, z)) return false;
+ y = y + 128;
+ }
+ return mouseSend(x, y, button, z);
+ case ABS_MOUSE:
+ HID_REPORT report;
+
+ report.data[0] = x & 0xff;
+ report.data[1] = (x >> 8) & 0xff;
+ report.data[2] = y & 0xff;
+ report.data[3] = (y >> 8) & 0xff;
+ report.data[4] = -z;
+ report.data[5] = button & 0x07;
+
+ report.length = 6;
+
+ return send(&report);
+ default:
+ return false;
+ }
+}
+
+bool USBMouse::mouseSend(int8_t x, int8_t y, uint8_t buttons, int8_t z) {
+ HID_REPORT report;
+ report.data[0] = buttons & 0x07;
+ report.data[1] = x;
+ report.data[2] = y;
+ report.data[3] = -z; // >0 to scroll down, <0 to scroll up
+
+ report.length = 4;
+
+ return send(&report);
+}
+
+bool USBMouse::move(int16_t x, int16_t y) {
+ return update(x, y, button, 0);
+}
+
+bool USBMouse::scroll(int8_t z) {
+ return update(0, 0, button, z);
+}
+
+
+bool USBMouse::doubleClick() {
+ if (!click(MOUSE_LEFT))
+ return false;
+ wait(0.1);
+ return click(MOUSE_LEFT);
+}
+
+bool USBMouse::click(uint8_t button) {
+ if (!update(0, 0, button, 0))
+ return false;
+ wait(0.01);
+ return update(0, 0, 0, 0);
+}
+
+bool USBMouse::press(uint8_t button_) {
+ button = button_ & 0x07;
+ return update(0, 0, button, 0);
+}
+
+bool USBMouse::release(uint8_t button_) {
+ button = (button & (~button_)) & 0x07;
+ return update(0, 0, button, 0);
+}
+
+
+uint8_t * USBMouse::reportDesc() {
+
+ if (mouse_type == REL_MOUSE) {
+ static uint8_t reportDescriptor[] = {
+ USAGE_PAGE(1), 0x01, // Genric Desktop
+ USAGE(1), 0x02, // Mouse
+ COLLECTION(1), 0x01, // Application
+ USAGE(1), 0x01, // Pointer
+ COLLECTION(1), 0x00, // Physical
+
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x01,
+ USAGE_PAGE(1), 0x09, // Buttons
+ USAGE_MINIMUM(1), 0x1,
+ USAGE_MAXIMUM(1), 0x3,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ INPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x05,
+ INPUT(1), 0x01,
+
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x08,
+ USAGE_PAGE(1), 0x01,
+ USAGE(1), 0x30, // X
+ USAGE(1), 0x31, // Y
+ USAGE(1), 0x38, // scroll
+ LOGICAL_MINIMUM(1), 0x81,
+ LOGICAL_MAXIMUM(1), 0x7f,
+ INPUT(1), 0x06, // Relative data
+
+ END_COLLECTION(0),
+ END_COLLECTION(0),
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+ } else if (mouse_type == ABS_MOUSE) {
+ static uint8_t reportDescriptor[] = {
+
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x02, // Mouse
+ COLLECTION(1), 0x01, // Application
+ USAGE(1), 0x01, // Pointer
+ COLLECTION(1), 0x00, // Physical
+
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x30, // X
+ USAGE(1), 0x31, // Y
+ LOGICAL_MINIMUM(1), 0x00, // 0
+ LOGICAL_MAXIMUM(2), 0xff, 0x7f, // 32767
+ REPORT_SIZE(1), 0x10,
+ REPORT_COUNT(1), 0x02,
+ INPUT(1), 0x02, // Data, Variable, Absolute
+
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x38, // scroll
+ LOGICAL_MINIMUM(1), 0x81, // -127
+ LOGICAL_MAXIMUM(1), 0x7f, // 127
+ REPORT_SIZE(1), 0x08,
+ REPORT_COUNT(1), 0x01,
+ INPUT(1), 0x06, // Data, Variable, Relative
+
+ USAGE_PAGE(1), 0x09, // Buttons
+ USAGE_MINIMUM(1), 0x01,
+ USAGE_MAXIMUM(1), 0x03,
+ LOGICAL_MINIMUM(1), 0x00, // 0
+ LOGICAL_MAXIMUM(1), 0x01, // 1
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x01,
+ INPUT(1), 0x02, // Data, Variable, Absolute
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x05,
+ INPUT(1), 0x01, // Constant
+
+ END_COLLECTION(0),
+ END_COLLECTION(0)
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+ }
+ return NULL;
+}
+
+
diff -r 000000000000 -r cbe01b678bd4 HID/USBMouse.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBMouse.h Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,187 @@
+/* USBMouse.h */
+/* USB device example: relative mouse */
+/* Copyright (c) 2011 ARM Limited. All rights reserved. */
+
+#ifndef USBMOUSE_H
+#define USBMOUSE_H
+
+#include "USBHID.h"
+
+#define REPORT_ID_MOUSE 2
+
+/* Common usage */
+
+enum MOUSE_BUTTON
+{
+ MOUSE_LEFT = 1,
+ MOUSE_RIGHT = 2,
+ MOUSE_MIDDLE = 4,
+};
+
+/* X and Y limits */
+/* These values do not directly map to screen pixels */
+/* Zero may be interpreted as meaning 'no movement' */
+#define X_MIN_ABS (1) /*!< Minimum value on x-axis */
+#define Y_MIN_ABS (1) /*!< Minimum value on y-axis */
+#define X_MAX_ABS (0x7fff) /*!< Maximum value on x-axis */
+#define Y_MAX_ABS (0x7fff) /*!< Maximum value on y-axis */
+
+#define X_MIN_REL (-127) /*!< The maximum value that we can move to the left on the x-axis */
+#define Y_MIN_REL (-127) /*!< The maximum value that we can move up on the y-axis */
+#define X_MAX_REL (127) /*!< The maximum value that we can move to the right on the x-axis */
+#define Y_MAX_REL (127) /*!< The maximum value that we can move down on the y-axis */
+
+enum MOUSE_TYPE
+{
+ ABS_MOUSE,
+ REL_MOUSE,
+};
+
+/**
+ *
+ * USBMouse example
+ * @code
+ * #include "mbed.h"
+ * #include "USBMouse.h"
+ *
+ * USBMouse mouse;
+ *
+ * int main(void)
+ * {
+ * while (1)
+ * {
+ * mouse.move(20, 0);
+ * wait(0.5);
+ * }
+ * }
+ *
+ * @endcode
+ *
+ *
+ * @code
+ * #include "mbed.h"
+ * #include "USBMouse.h"
+ *
+ * USBMouse mouse(ABS_MOUSE);
+ *
+ * #include <math.h>
+ *
+ * int main(void)
+ * {
+ * uint16_t x_center = (X_MAX_ABS - X_MIN_ABS)/2;
+ * uint16_t y_center = (Y_MAX_ABS - Y_MIN_ABS)/2;
+ * uint16_t x_screen = 0;
+ * uint16_t y_screen = 0;
+ *
+ * uint32_t x_origin = x_center;
+ * uint32_t y_origin = y_center;
+ * uint32_t radius = 5000;
+ * uint32_t angle = 0;
+ *
+ * while (1)
+ * {
+ * x_screen = x_origin + cos((double)angle*3.14/180.0)*radius;
+ * y_screen = y_origin + sin((double)angle*3.14/180.0)*radius;
+ *
+ * mouse.move(x_screen, y_screen);
+ * angle += 3;
+ * wait(0.01);
+ * }
+ * }
+ *
+ * @endcode
+ */
+class USBMouse: public USBHID
+{
+ public:
+
+ /**
+ * Constructor
+ *
+ * @param mouse_type Mouse type: ABS_MOUSE (absolute mouse) or REL_MOUSE (relative mouse) (default: REL_MOUSE)
+ * @param vendor_id Your vendor_id (default: 0x1234)
+ * @param product_id Your product_id (default: 0x0001)
+ * @param product_release Your preoduct_release (default: 0x0001)
+ *
+ */
+ USBMouse(MOUSE_TYPE mouse_type = REL_MOUSE, uint16_t vendor_id = 0x1234, uint16_t product_id = 0x0001, uint16_t product_release = 0x0001):
+ USBHID(vendor_id, product_id, product_release)
+ {
+ button = 0;
+ this->mouse_type = mouse_type;
+ };
+
+ /**
+ * Write a state of the mouse
+ *
+ * @param x x-axis position
+ * @param y y-axis position
+ * @param buttons buttons state (first bit represents MOUSE_LEFT, second bit MOUSE_RIGHT and third bit MOUSE_MIDDLE)
+ * @param z wheel state (>0 to scroll down, <0 to scroll up)
+ * @returns true if there is no error, false otherwise
+ */
+ bool update(int16_t x, int16_t y, uint8_t buttons, int8_t z);
+
+
+ /**
+ * Move the cursor to (x, y)
+ *
+ * @param x-axis position
+ * @param y-axis position
+ * @returns true if there is no error, false otherwise
+ */
+ bool move(int16_t x, int16_t y);
+
+ /**
+ * Press one or several buttons
+ *
+ * @param button button state (ex: press(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool press(uint8_t button);
+
+ /**
+ * Release one or several buttons
+ *
+ * @param button button state (ex: release(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool release(uint8_t button);
+
+ /**
+ * Double click (MOUSE_LEFT)
+ *
+ * @returns true if there is no error, false otherwise
+ */
+ bool doubleClick();
+
+ /**
+ * Click
+ *
+ * @param button state of the buttons ( ex: clic(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool click(uint8_t button);
+
+ /**
+ * Scrolling
+ *
+ * @param z value of the wheel (>0 to go down, <0 to go up)
+ * @returns true if there is no error, false otherwise
+ */
+ bool scroll(int8_t z);
+
+ /**
+ * To define the report descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
+ *
+ * @returns pointer to the report descriptor
+ */
+ virtual uint8_t * reportDesc();
+
+ private:
+ MOUSE_TYPE mouse_type;
+ uint8_t button;
+ bool mouseSend(int8_t x, int8_t y, uint8_t buttons, int8_t z);
+};
+
+#endif
diff -r 000000000000 -r cbe01b678bd4 HID/USBMouseKeyboard.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBMouseKeyboard.cpp Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,675 @@
+// Keyboard_RelMouse.c
+// USB device example: Keyboard and a relative mouse
+// Copyright (c) 2011 ARM Limited. All rights reserved.
+
+#include "stdint.h"
+#include "USBMouseKeyboard.h"
+
+
+/* Modifiers */
+enum MODIFIER_KEY
+{
+ KEY_CTRL = 1,
+ KEY_SHIFT = 2,
+ KEY_ALT = 4,
+};
+
+typedef struct {
+ unsigned char usage;
+ unsigned char modifier;
+} KEYMAP;
+
+#ifdef US_KEYBOARD
+/* US keyboard (as HID standard) */
+#define KEYMAP_SIZE (145)
+const KEYMAP keymap[KEYMAP_SIZE] = {
+{0, 0}, /* NUL */
+{0, 0}, /* SOH */
+{0, 0}, /* STX */
+{0, 0}, /* ETX */
+{0, 0}, /* EOT */
+{0, 0}, /* ENQ */
+{0, 0}, /* ACK */
+{0, 0}, /* BEL */
+{0x2a, 0}, /* BS */ /* Keyboard Delete (Backspace) */
+{0x2b, 0}, /* TAB */ /* Keyboard Tab */
+{0x28, 0}, /* LF */ /* Keyboard Return (Enter) */
+{0, 0}, /* VT */
+{0, 0}, /* FF */
+{0, 0}, /* CR */
+{0, 0}, /* SO */
+{0, 0}, /* SI */
+{0, 0}, /* DEL */
+{0, 0}, /* DC1 */
+{0, 0}, /* DC2 */
+{0, 0}, /* DC3 */
+{0, 0}, /* DC4 */
+{0, 0}, /* NAK */
+{0, 0}, /* SYN */
+{0, 0}, /* ETB */
+{0, 0}, /* CAN */
+{0, 0}, /* EM */
+{0, 0}, /* SUB */
+{0, 0}, /* ESC */
+{0, 0}, /* FS */
+{0, 0}, /* GS */
+{0, 0}, /* RS */
+{0, 0}, /* US */
+{0x2c, 0}, /* */
+{0x1e, KEY_SHIFT}, /* ! */
+{0x34, KEY_SHIFT}, /* " */
+{0x20, KEY_SHIFT}, /* # */
+{0x21, KEY_SHIFT}, /* $ */
+{0x22, KEY_SHIFT}, /* % */
+{0x24, KEY_SHIFT}, /* & */
+{0x34, 0}, /* ' */
+{0x26, KEY_SHIFT}, /* ( */
+{0x27, KEY_SHIFT}, /* ) */
+{0x25, KEY_SHIFT}, /* * */
+{0x2e, KEY_SHIFT}, /* + */
+{0x36, 0}, /* , */
+{0x2d, 0}, /* - */
+{0x37, 0}, /* . */
+{0x38, 0}, /* / */
+{0x27, 0}, /* 0 */
+{0x1e, 0}, /* 1 */
+{0x1f, 0}, /* 2 */
+{0x20, 0}, /* 3 */
+{0x21, 0}, /* 4 */
+{0x22, 0}, /* 5 */
+{0x23, 0}, /* 6 */
+{0x24, 0}, /* 7 */
+{0x25, 0}, /* 8 */
+{0x26, 0}, /* 9 */
+{0x33, KEY_SHIFT}, /* : */
+{0x33, 0}, /* ; */
+{0x36, KEY_SHIFT}, /* < */
+{0x2e, 0}, /* = */
+{0x37, KEY_SHIFT}, /* > */
+{0x38, KEY_SHIFT}, /* ? */
+{0x1f, KEY_SHIFT}, /* @ */
+{0x04, KEY_SHIFT}, /* A */
+{0x05, KEY_SHIFT}, /* B */
+{0x06, KEY_SHIFT}, /* C */
+{0x07, KEY_SHIFT}, /* D */
+{0x08, KEY_SHIFT}, /* E */
+{0x09, KEY_SHIFT}, /* F */
+{0x0a, KEY_SHIFT}, /* G */
+{0x0b, KEY_SHIFT}, /* H */
+{0x0c, KEY_SHIFT}, /* I */
+{0x0d, KEY_SHIFT}, /* J */
+{0x0e, KEY_SHIFT}, /* K */
+{0x0f, KEY_SHIFT}, /* L */
+{0x10, KEY_SHIFT}, /* M */
+{0x11, KEY_SHIFT}, /* N */
+{0x12, KEY_SHIFT}, /* O */
+{0x13, KEY_SHIFT}, /* P */
+{0x14, KEY_SHIFT}, /* Q */
+{0x15, KEY_SHIFT}, /* R */
+{0x16, KEY_SHIFT}, /* S */
+{0x17, KEY_SHIFT}, /* T */
+{0x18, KEY_SHIFT}, /* U */
+{0x19, KEY_SHIFT}, /* V */
+{0x1a, KEY_SHIFT}, /* W */
+{0x1b, KEY_SHIFT}, /* X */
+{0x1c, KEY_SHIFT}, /* Y */
+{0x1d, KEY_SHIFT}, /* Z */
+{0x2f, 0}, /* [ */
+{0x31, 0}, /* \ */
+{0x30, 0}, /* ] */
+{0x23, KEY_SHIFT}, /* ^ */
+{0x2d, KEY_SHIFT}, /* _ */
+{0x35, 0}, /* ` */
+{0x04, 0}, /* a */
+{0x05, 0}, /* b */
+{0x06, 0}, /* c */
+{0x07, 0}, /* d */
+{0x08, 0}, /* e */
+{0x09, 0}, /* f */
+{0x0a, 0}, /* g */
+{0x0b, 0}, /* h */
+{0x0c, 0}, /* i */
+{0x0d, 0}, /* j */
+{0x0e, 0}, /* k */
+{0x0f, 0}, /* l */
+{0x10, 0}, /* m */
+{0x11, 0}, /* n */
+{0x12, 0}, /* o */
+{0x13, 0}, /* p */
+{0x14, 0}, /* q */
+{0x15, 0}, /* r */
+{0x16, 0}, /* s */
+{0x17, 0}, /* t */
+{0x18, 0}, /* u */
+{0x19, 0}, /* v */
+{0x1a, 0}, /* w */
+{0x1b, 0}, /* x */
+{0x1c, 0}, /* y */
+{0x1d, 0}, /* z */
+{0x2f, KEY_SHIFT}, /* { */
+{0x31, KEY_SHIFT}, /* | */
+{0x30, KEY_SHIFT}, /* } */
+{0x35, KEY_SHIFT}, /* ~ */
+{0,0}, /* DEL */
+
+{0x3a, 0}, /* F1 */
+{0x3b, 0}, /* F2 */
+{0x3c, 0}, /* F3 */
+{0x3d, 0}, /* F4 */
+{0x3e, 0}, /* F5 */
+{0x3f, 0}, /* F6 */
+{0x40, 0}, /* F7 */
+{0x41, 0}, /* F8 */
+{0x42, 0}, /* F9 */
+{0x43, 0}, /* F10 */
+{0x44, 0}, /* F11 */
+{0x45, 0}, /* F12 */
+
+{0x46, 0}, /* PRINT_SCREEN */
+{0x49, 0}, /* INSERT */
+{0x4a, 0}, /* HOME */
+{0x4b, 0}, /* PAGE_UP */
+{0x4e, 0}, /* PAGE_DOWN */
+};
+
+#else
+/* UK keyboard */
+#define KEYMAP_SIZE (145)
+const KEYMAP keymap[KEYMAP_SIZE] = {
+{0, 0}, /* NUL */
+{0, 0}, /* SOH */
+{0, 0}, /* STX */
+{0, 0}, /* ETX */
+{0, 0}, /* EOT */
+{0, 0}, /* ENQ */
+{0, 0}, /* ACK */
+{0, 0}, /* BEL */
+{0x2a, 0}, /* BS */ /* Keyboard Delete (Backspace) */
+{0x2b, 0}, /* TAB */ /* Keyboard Tab */
+{0x28, 0}, /* LF */ /* Keyboard Return (Enter) */
+{0, 0}, /* VT */
+{0, 0}, /* FF */
+{0, 0}, /* CR */
+{0, 0}, /* SO */
+{0, 0}, /* SI */
+{0, 0}, /* DEL */
+{0, 0}, /* DC1 */
+{0, 0}, /* DC2 */
+{0, 0}, /* DC3 */
+{0, 0}, /* DC4 */
+{0, 0}, /* NAK */
+{0, 0}, /* SYN */
+{0, 0}, /* ETB */
+{0, 0}, /* CAN */
+{0, 0}, /* EM */
+{0, 0}, /* SUB */
+{0, 0}, /* ESC */
+{0, 0}, /* FS */
+{0, 0}, /* GS */
+{0, 0}, /* RS */
+{0, 0}, /* US */
+{0x2c, 0}, /* */
+{0x1e, KEY_SHIFT}, /* ! */
+{0x1f, KEY_SHIFT}, /* " */
+{0x32, 0}, /* # */
+{0x21, KEY_SHIFT}, /* $ */
+{0x22, KEY_SHIFT}, /* % */
+{0x24, KEY_SHIFT}, /* & */
+{0x34, 0}, /* ' */
+{0x26, KEY_SHIFT}, /* ( */
+{0x27, KEY_SHIFT}, /* ) */
+{0x25, KEY_SHIFT}, /* * */
+{0x2e, KEY_SHIFT}, /* + */
+{0x36, 0}, /* , */
+{0x2d, 0}, /* - */
+{0x37, 0}, /* . */
+{0x38, 0}, /* / */
+{0x27, 0}, /* 0 */
+{0x1e, 0}, /* 1 */
+{0x1f, 0}, /* 2 */
+{0x20, 0}, /* 3 */
+{0x21, 0}, /* 4 */
+{0x22, 0}, /* 5 */
+{0x23, 0}, /* 6 */
+{0x24, 0}, /* 7 */
+{0x25, 0}, /* 8 */
+{0x26, 0}, /* 9 */
+{0x33, KEY_SHIFT}, /* : */
+{0x33, 0}, /* ; */
+{0x36, KEY_SHIFT}, /* < */
+{0x2e, 0}, /* = */
+{0x37, KEY_SHIFT}, /* > */
+{0x38, KEY_SHIFT}, /* ? */
+{0x34, KEY_SHIFT}, /* @ */
+{0x04, KEY_SHIFT}, /* A */
+{0x05, KEY_SHIFT}, /* B */
+{0x06, KEY_SHIFT}, /* C */
+{0x07, KEY_SHIFT}, /* D */
+{0x08, KEY_SHIFT}, /* E */
+{0x09, KEY_SHIFT}, /* F */
+{0x0a, KEY_SHIFT}, /* G */
+{0x0b, KEY_SHIFT}, /* H */
+{0x0c, KEY_SHIFT}, /* I */
+{0x0d, KEY_SHIFT}, /* J */
+{0x0e, KEY_SHIFT}, /* K */
+{0x0f, KEY_SHIFT}, /* L */
+{0x10, KEY_SHIFT}, /* M */
+{0x11, KEY_SHIFT}, /* N */
+{0x12, KEY_SHIFT}, /* O */
+{0x13, KEY_SHIFT}, /* P */
+{0x14, KEY_SHIFT}, /* Q */
+{0x15, KEY_SHIFT}, /* R */
+{0x16, KEY_SHIFT}, /* S */
+{0x17, KEY_SHIFT}, /* T */
+{0x18, KEY_SHIFT}, /* U */
+{0x19, KEY_SHIFT}, /* V */
+{0x1a, KEY_SHIFT}, /* W */
+{0x1b, KEY_SHIFT}, /* X */
+{0x1c, KEY_SHIFT}, /* Y */
+{0x1d, KEY_SHIFT}, /* Z */
+{0x2f, 0}, /* [ */
+{0x64, 0}, /* \ */
+{0x30, 0}, /* ] */
+{0x23, KEY_SHIFT}, /* ^ */
+{0x2d, KEY_SHIFT}, /* _ */
+{0x35, 0}, /* ` */
+{0x04, 0}, /* a */
+{0x05, 0}, /* b */
+{0x06, 0}, /* c */
+{0x07, 0}, /* d */
+{0x08, 0}, /* e */
+{0x09, 0}, /* f */
+{0x0a, 0}, /* g */
+{0x0b, 0}, /* h */
+{0x0c, 0}, /* i */
+{0x0d, 0}, /* j */
+{0x0e, 0}, /* k */
+{0x0f, 0}, /* l */
+{0x10, 0}, /* m */
+{0x11, 0}, /* n */
+{0x12, 0}, /* o */
+{0x13, 0}, /* p */
+{0x14, 0}, /* q */
+{0x15, 0}, /* r */
+{0x16, 0}, /* s */
+{0x17, 0}, /* t */
+{0x18, 0}, /* u */
+{0x19, 0}, /* v */
+{0x1a, 0}, /* w */
+{0x1b, 0}, /* x */
+{0x1c, 0}, /* y */
+{0x1d, 0}, /* z */
+{0x2f, KEY_SHIFT}, /* { */
+{0x64, KEY_SHIFT}, /* | */
+{0x30, KEY_SHIFT}, /* } */
+{0x32, KEY_SHIFT}, /* ~ */
+{0,0}, /* DEL */
+
+{0x3a, 0}, /* F1 */
+{0x3b, 0}, /* F2 */
+{0x3c, 0}, /* F3 */
+{0x3d, 0}, /* F4 */
+{0x3e, 0}, /* F5 */
+{0x3f, 0}, /* F6 */
+{0x40, 0}, /* F7 */
+{0x41, 0}, /* F8 */
+{0x42, 0}, /* F9 */
+{0x43, 0}, /* F10 */
+{0x44, 0}, /* F11 */
+{0x45, 0}, /* F12 */
+
+{0x46, 0}, /* PRINT_SCREEN */
+{0x49, 0}, /* INSERT */
+{0x4a, 0}, /* HOME */
+{0x4b, 0}, /* PAGE_UP */
+{0x4e, 0}, /* PAGE_DOWN */
+};
+#endif
+
+uint8_t * USBMouseKeyboard::reportDesc() {
+ if (mouse_type == REL_MOUSE) {
+ static uint8_t reportDescriptor[] = {
+ // Keyboard
+ USAGE_PAGE(1), 0x01,
+ USAGE(1), 0x06,
+ COLLECTION(1), 0x01,
+ REPORT_ID(1), REPORT_ID_KEYBOARD,
+ USAGE_PAGE(1), 0x07,
+ USAGE_MINIMUM(1), 0xE0,
+ USAGE_MAXIMUM(1), 0xE7,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x08,
+ INPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x08,
+ INPUT(1), 0x01,
+ REPORT_COUNT(1), 0x05,
+ REPORT_SIZE(1), 0x01,
+ USAGE_PAGE(1), 0x08,
+ USAGE_MINIMUM(1), 0x01,
+ USAGE_MAXIMUM(1), 0x05,
+ OUTPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x03,
+ OUTPUT(1), 0x01,
+ REPORT_COUNT(1), 0x06,
+ REPORT_SIZE(1), 0x08,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(2), 0xff, 0x00,
+ USAGE_PAGE(1), 0x07,
+ USAGE_MINIMUM(1), 0x00,
+ USAGE_MAXIMUM(2), 0xff, 0x00,
+ INPUT(1), 0x00,
+ END_COLLECTION(0),
+
+ // Mouse
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x02, // Mouse
+ COLLECTION(1), 0x01, // Application
+ USAGE(1), 0x01, // Pointer
+ COLLECTION(1), 0x00, // Physical
+ REPORT_ID(1), REPORT_ID_MOUSE,
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x01,
+ USAGE_PAGE(1), 0x09, // Buttons
+ USAGE_MINIMUM(1), 0x1,
+ USAGE_MAXIMUM(1), 0x3,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ INPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x05,
+ INPUT(1), 0x01,
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x08,
+ USAGE_PAGE(1), 0x01,
+ USAGE(1), 0x30, // X
+ USAGE(1), 0x31, // Y
+ USAGE(1), 0x38, // scroll
+ LOGICAL_MINIMUM(1), 0x81,
+ LOGICAL_MAXIMUM(1), 0x7f,
+ INPUT(1), 0x06,
+ END_COLLECTION(0),
+ END_COLLECTION(0),
+
+
+ // Media Control
+ USAGE_PAGE(1), 0x0C,
+ USAGE(1), 0x01,
+ COLLECTION(1), 0x01,
+ REPORT_ID(1), REPORT_ID_VOLUME,
+ USAGE_PAGE(1), 0x0C,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x07,
+ USAGE(1), 0xB5, // Next Track
+ USAGE(1), 0xB6, // Previous Track
+ USAGE(1), 0xB7, // Stop
+ USAGE(1), 0xCD, // Play / Pause
+ USAGE(1), 0xE2, // Mute
+ USAGE(1), 0xE9, // Volume Up
+ USAGE(1), 0xEA, // Volume Down
+ INPUT(1), 0x02, // Input (Data, Variable, Absolute)
+ REPORT_COUNT(1), 0x01,
+ INPUT(1), 0x01,
+ END_COLLECTION(0),
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+ } else if (mouse_type == ABS_MOUSE) {
+ static uint8_t reportDescriptor[] = {
+
+ // Keyboard
+ USAGE_PAGE(1), 0x01,
+ USAGE(1), 0x06,
+ COLLECTION(1), 0x01,
+ REPORT_ID(1), REPORT_ID_KEYBOARD,
+ USAGE_PAGE(1), 0x07,
+ USAGE_MINIMUM(1), 0xE0,
+ USAGE_MAXIMUM(1), 0xE7,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x08,
+ INPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x08,
+ INPUT(1), 0x01,
+ REPORT_COUNT(1), 0x05,
+ REPORT_SIZE(1), 0x01,
+ USAGE_PAGE(1), 0x08,
+ USAGE_MINIMUM(1), 0x01,
+ USAGE_MAXIMUM(1), 0x05,
+ OUTPUT(1), 0x02,
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x03,
+ OUTPUT(1), 0x01,
+ REPORT_COUNT(1), 0x06,
+ REPORT_SIZE(1), 0x08,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(2), 0xff, 0x00,
+ USAGE_PAGE(1), 0x07,
+ USAGE_MINIMUM(1), 0x00,
+ USAGE_MAXIMUM(2), 0xff, 0x00,
+ INPUT(1), 0x00,
+ END_COLLECTION(0),
+
+ // Mouse
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x02, // Mouse
+ COLLECTION(1), 0x01, // Application
+ USAGE(1), 0x01, // Pointer
+ COLLECTION(1), 0x00, // Physical
+ REPORT_ID(1), REPORT_ID_MOUSE,
+
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x30, // X
+ USAGE(1), 0x31, // Y
+ LOGICAL_MINIMUM(1), 0x00, // 0
+ LOGICAL_MAXIMUM(2), 0xff, 0x7f, // 32767
+ REPORT_SIZE(1), 0x10,
+ REPORT_COUNT(1), 0x02,
+ INPUT(1), 0x02, // Data, Variable, Absolute
+
+ USAGE_PAGE(1), 0x01, // Generic Desktop
+ USAGE(1), 0x38, // scroll
+ LOGICAL_MINIMUM(1), 0x81, // -127
+ LOGICAL_MAXIMUM(1), 0x7f, // 127
+ REPORT_SIZE(1), 0x08,
+ REPORT_COUNT(1), 0x01,
+ INPUT(1), 0x06, // Data, Variable, Relative
+
+ USAGE_PAGE(1), 0x09, // Buttons
+ USAGE_MINIMUM(1), 0x01,
+ USAGE_MAXIMUM(1), 0x03,
+ LOGICAL_MINIMUM(1), 0x00, // 0
+ LOGICAL_MAXIMUM(1), 0x01, // 1
+ REPORT_COUNT(1), 0x03,
+ REPORT_SIZE(1), 0x01,
+ INPUT(1), 0x02, // Data, Variable, Absolute
+ REPORT_COUNT(1), 0x01,
+ REPORT_SIZE(1), 0x05,
+ INPUT(1), 0x01, // Constant
+
+ END_COLLECTION(0),
+ END_COLLECTION(0),
+
+ // Media Control
+ USAGE_PAGE(1), 0x0C,
+ USAGE(1), 0x01,
+ COLLECTION(1), 0x01,
+ REPORT_ID(1), REPORT_ID_VOLUME,
+ USAGE_PAGE(1), 0x0C,
+ LOGICAL_MINIMUM(1), 0x00,
+ LOGICAL_MAXIMUM(1), 0x01,
+ REPORT_SIZE(1), 0x01,
+ REPORT_COUNT(1), 0x07,
+ USAGE(1), 0xB5, // Next Track
+ USAGE(1), 0xB6, // Previous Track
+ USAGE(1), 0xB7, // Stop
+ USAGE(1), 0xCD, // Play / Pause
+ USAGE(1), 0xE2, // Mute
+ USAGE(1), 0xE9, // Volume Up
+ USAGE(1), 0xEA, // Volume Down
+ INPUT(1), 0x02, // Input (Data, Variable, Absolute)
+ REPORT_COUNT(1), 0x01,
+ INPUT(1), 0x01,
+ END_COLLECTION(0),
+ };
+ reportLength = sizeof(reportDescriptor);
+ return reportDescriptor;
+ }
+
+ return NULL;
+}
+
+bool USBMouseKeyboard::update(int16_t x, int16_t y, uint8_t button, int8_t z) {
+ switch (mouse_type) {
+ case REL_MOUSE:
+ while (x > 127) {
+ if (!mouseSend(127, 0, button, z)) return false;
+ x = x - 127;
+ }
+ while (x < -128) {
+ if (!mouseSend(-128, 0, button, z)) return false;
+ x = x + 128;
+ }
+ while (y > 127) {
+ if (!mouseSend(0, 127, button, z)) return false;
+ y = y - 127;
+ }
+ while (y < -128) {
+ if (!mouseSend(0, -128, button, z)) return false;
+ y = y + 128;
+ }
+ return mouseSend(x, y, button, z);
+ case ABS_MOUSE:
+ HID_REPORT report;
+
+ report.data[0] = REPORT_ID_MOUSE;
+ report.data[1] = x & 0xff;
+ report.data[2] = (x >> 8) & 0xff;
+ report.data[3] = y & 0xff;
+ report.data[4] = (y >> 8) & 0xff;
+ report.data[5] = -z;
+ report.data[6] = button & 0x07;
+
+ report.length = 7;
+
+ return send(&report);
+ default:
+ return false;
+ }
+}
+
+bool USBMouseKeyboard::mouseSend(int8_t x, int8_t y, uint8_t buttons, int8_t z) {
+ HID_REPORT report;
+ report.data[0] = REPORT_ID_MOUSE;
+ report.data[1] = buttons & 0x07;
+ report.data[2] = x;
+ report.data[3] = y;
+ report.data[4] = -z; // >0 to scroll down, <0 to scroll up
+
+ report.length = 5;
+
+ return send(&report);
+}
+
+bool USBMouseKeyboard::move(int16_t x, int16_t y) {
+ return update(x, y, button, 0);
+}
+
+bool USBMouseKeyboard::scroll(int8_t z) {
+ return update(0, 0, button, z);
+}
+
+bool USBMouseKeyboard::doubleClick() {
+ if (!click(MOUSE_LEFT))
+ return false;
+ wait(0.1);
+ return click(MOUSE_LEFT);
+}
+
+bool USBMouseKeyboard::click(uint8_t button) {
+ if (!update(0, 0, button, 0))
+ return false;
+ wait(0.01);
+ return update(0, 0, 0, 0);
+}
+
+bool USBMouseKeyboard::press(uint8_t button_) {
+ button = button_ & 0x07;
+ return update(0, 0, button, 0);
+}
+
+bool USBMouseKeyboard::release(uint8_t button_) {
+ button = (button & (~button_)) & 0x07;
+ return update(0, 0, button, 0);
+}
+
+int USBMouseKeyboard::_putc(int c) {
+ return keyCode(c, keymap[c].modifier);
+}
+
+bool USBMouseKeyboard::keyCode(uint8_t key, uint8_t modifier) {
+ // Send a simulated keyboard keypress. Returns true if successful.
+
+ HID_REPORT report;
+
+ report.data[0] = REPORT_ID_KEYBOARD;
+ report.data[1] = modifier;
+ report.data[2] = 0;
+ report.data[3] = keymap[key].usage;
+ report.data[4] = 0;
+ report.data[5] = 0;
+ report.data[6] = 0;
+ report.data[7] = 0;
+ report.data[8] = 0;
+
+ report.length = 9;
+
+ if (!send(&report)) {
+ return false;
+ }
+
+ report.data[1] = 0;
+ report.data[3] = 0;
+
+ if (!send(&report)) {
+ return false;
+ }
+
+ return true;
+
+}
+
+
+bool USBMouseKeyboard::mediaControl(MEDIA_KEY key) {
+ HID_REPORT report;
+
+ report.data[0] = REPORT_ID_VOLUME;
+ report.data[1] = (1 << key) & 0x7f;
+
+ report.length = 2;
+
+ send(&report);
+
+ report.data[0] = REPORT_ID_VOLUME;
+ report.data[1] = 0;
+
+ report.length = 2;
+
+ return send(&report);
+}
+
+
+
+
+
+
+
+
+
diff -r 000000000000 -r cbe01b678bd4 HID/USBMouseKeyboard.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HID/USBMouseKeyboard.h Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,185 @@
+/* USBMouseKeyboard.h */
+/* USB device example: Keyboard with a relative mouse */
+/* Copyright (c) 2011 ARM Limited. All rights reserved. */
+
+#ifndef USBMOUSEKEYBOARD_H
+#define USBMOUSEKEYBOARD_H
+
+#define REPORT_ID_KEYBOARD 1
+#define REPORT_ID_MOUSE 2
+#define REPORT_ID_VOLUME 3
+
+#include "USBMouse.h"
+#include "USBKeyboard.h"
+#include "Stream.h"
+#include "USBHID.h"
+
+/**
+ * USBMouseKeyboard example
+ * @code
+ *
+ * #include "mbed.h"
+ * #include "USBMouseKeyboard.h"
+ *
+ * USBMouseKeyboard key_mouse;
+ *
+ * int main(void)
+ * {
+ * while(1)
+ * {
+ * key_mouse.move(20, 0);
+ * key_mouse.puts("Hello From MBED\r\n");
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ *
+ *
+ * @code
+ *
+ * #include "mbed.h"
+ * #include "USBMouseKeyboard.h"
+ *
+ * USBMouseKeyboard key_mouse(ABS_MOUSE);
+ *
+ * int main(void)
+ * {
+ * while(1)
+ * {
+ * key_mouse.move(X_MAX_ABS/2, Y_MAX_ABS/2);
+ * key_mouse.puts("Hello from MBED\r\n");
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+class USBMouseKeyboard: public USBHID, public Stream
+{
+ public:
+
+ /**
+ * Constructor
+ *
+ * @param mouse_type Mouse type: ABS_MOUSE (absolute mouse) or REL_MOUSE (relative mouse) (default: REL_MOUSE)
+ * @param vendor_id Your vendor_id (default: 0x1234)
+ * @param product_id Your product_id (default: 0x0001)
+ * @param product_release Your preoduct_release (default: 0x0001)
+ *
+ */
+ USBMouseKeyboard(MOUSE_TYPE mouse_type = REL_MOUSE, uint16_t vendor_id = 0x1234, uint16_t product_id = 0x0010, uint16_t product_release = 0x0001):
+ USBHID(vendor_id, product_id, product_release)
+ {
+ button = 0;
+ this->mouse_type = mouse_type;
+ };
+
+
+ /**
+ * Write a state of the mouse
+ *
+ * @param x x-axis position
+ * @param y y-axis position
+ * @param buttons buttons state (first bit represents MOUSE_LEFT, second bit MOUSE_RIGHT and third bit MOUSE_MIDDLE)
+ * @param z wheel state (>0 to scroll down, <0 to scroll up)
+ * @returns true if there is no error, false otherwise
+ */
+ bool update(int16_t x, int16_t y, uint8_t buttons, int8_t z);
+
+
+ /**
+ * Move the cursor to (x, y)
+ *
+ * @param x x-axis position
+ * @param y y-axis position
+ * @returns true if there is no error, false otherwise
+ */
+ bool move(int16_t x, int16_t y);
+
+ /**
+ * Press one or several buttons
+ *
+ * @param button button state (ex: press(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool press(uint8_t button);
+
+ /**
+ * Release one or several buttons
+ *
+ * @param button button state (ex: release(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool release(uint8_t button);
+
+ /**
+ * Double click (MOUSE_LEFT)
+ *
+ * @returns true if there is no error, false otherwise
+ */
+ bool doubleClick();
+
+ /**
+ * Click
+ *
+ * @param button state of the buttons ( ex: clic(MOUSE_LEFT))
+ * @returns true if there is no error, false otherwise
+ */
+ bool click(uint8_t button);
+
+ /**
+ * Scrolling
+ *
+ * @param z value of the wheel (>0 to go down, <0 to go up)
+ * @returns true if there is no error, false otherwise
+ */
+ bool scroll(int8_t z);
+
+ /**
+ * To send a character defined by a modifier(CTRL, SHIFT, ALT) and the key
+ *
+ * @code
+ * //To send CTRL + s (save)
+ * keyboard.keyCode('s', KEY_CTRL);
+ * @endcode
+ *
+ * @param modifier bit 0: CTRL, bit 1: SHIFT, bit 2: ALT (default: 0)
+ * @param key character to send
+ * @returns true if there is no error, false otherwise
+ */
+ bool keyCode(uint8_t key, uint8_t modifier = 0);
+
+ /**
+ * Send a character
+ *
+ * @param c character to be sent
+ * @returns true if there is no error, false otherwise
+ */
+ virtual int _putc(int c);
+
+ /**
+ * Control media keys
+ *
+ * @param key media key pressed (KEY_NEXT_TRACK, KEY_PREVIOUS_TRACK, KEY_STOP, KEY_PLAY_PAUSE, KEY_MUTE, KEY_VOLUME_UP, KEY_VOLUME_DOWN)
+ * @returns true if there is no error, false otherwise
+ */
+ bool mediaControl(MEDIA_KEY key);
+
+ /**
+ * To define the report descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
+ *
+ * @returns pointer to the report descriptor
+ */
+ virtual uint8_t * reportDesc();
+
+
+ private:
+ bool mouseWrite(int8_t x, int8_t y, uint8_t buttons, int8_t z);
+ MOUSE_TYPE mouse_type;
+ uint8_t button;
+ bool mouseSend(int8_t x, int8_t y, uint8_t buttons, int8_t z);
+
+ //dummy otherwise it doesn,t compile (we must define all methods of an abstract class)
+ virtual int _getc() { return -1;}
+};
+
+#endif
diff -r 000000000000 -r cbe01b678bd4 main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Sat Nov 19 22:54:22 2011 +0000
@@ -0,0 +1,89 @@
+#include "mbed.h"
+#include "USBHID.h"
+/*
+DigitalOut myled1(LED1);
+DigitalOut myled2(LED2);
+DigitalOut myled3(LED3);
+DigitalOut myled4(LED4);
+*/
+BusOut leds(LED1,LED2,LED3,LED4);
+AnalogIn PortA (p20);
+AnalogIn PortB (p19);
+AnalogIn PortC (p18);
+AnalogIn PortD (p17);
+
+int a, x, t, k;
+int An_a, An_b, An_c, An_d;
+
+#define HID_MessageSize 18
+
+//This report will contain data to be sent
+HID_REPORT send_report;
+HID_REPORT recv;
+
+//We declare a USBHID device
+USBHID hid_A (HID_MessageSize, HID_MessageSize,0xcbc,0x123,5); // In Length, Out Length, VID, PID, Release
+//USBHID hid_B (HID_MessageSize, HID_MessageSize,0xcbc,0x123,6);
+
+
+// Strings are in "USBDevice.cpp"
+
+
+//BusOut leds(LED1,LED2,LED3,LED4);
+
+int main(void) {
+
+ //Fill the report
+ for (int i = 0; i < HID_MessageSize; i++)
+ send_report.data[i] = i;
+ send_report.length = HID_MessageSize;
+
+ //jjhhggrr
+
+ while (1)
+ {
+ //Send the report
+
+// if (hid_A.readNB(&recv))
+ {
+ leds = recv.data[0];
+ send_report.data[1]++;
+
+ // just a test to see how fast send could be ..
+
+ for (x=0; x<200;x++)
+ {
+
+ An_a = PortA.read_u16();
+ An_b = PortB.read_u16();
+ An_c = PortC.read_u16();
+ An_d = PortD.read_u16();
+
+ send_report.data[3] = An_a & 0xff;
+ send_report.data[2] = An_a >>8;
+
+ send_report.data[5] = An_b & 0xff;
+ send_report.data[4] = An_b >>8;
+
+ send_report.data[7] = An_c & 0xff;
+ send_report.data[6] = An_c >>8;
+
+ send_report.data[9] = An_d & 0xff;
+ send_report.data[8] = An_d >>8;;
+
+ send_report.data[11] = k & 0xff;
+ send_report.data[10] = k >>8;
+
+ k++;
+
+ send_report.data[16] = x;
+ hid_A.send(&send_report);
+ }
+
+
+ }
+ send_report.data[HID_MessageSize-2]++;
+ hid_A.send(&send_report);
+ wait(0.5);
+ }
+}
diff -r 000000000000 -r cbe01b678bd4 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Sat Nov 19 22:54:22 2011 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/63bcd7ba4912