prova invio BLE
Dependents: BLE_HeartRate_IDB04A1
Fork of BLE_API by
ble/UUID.h@1022:306c409f6c09, 2015-12-10 (annotated)
- Committer:
- rgrover1
- Date:
- Thu Dec 10 09:15:02 2015 +0000
- Revision:
- 1022:306c409f6c09
- Parent:
- 993:4d62b7967c11
- Child:
- 1023:a072b59caddb
Synchronized with git rev ea69dba5
Author: Marcus Chang
Reversed internal representation of long UUID in the UUID class to little endian to be consistent with the short UUID.
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
rgrover1 | 710:b2e1a2660ec2 | 1 | /* mbed Microcontroller Library |
rgrover1 | 710:b2e1a2660ec2 | 2 | * Copyright (c) 2006-2013 ARM Limited |
rgrover1 | 710:b2e1a2660ec2 | 3 | * |
rgrover1 | 710:b2e1a2660ec2 | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
rgrover1 | 710:b2e1a2660ec2 | 5 | * you may not use this file except in compliance with the License. |
rgrover1 | 710:b2e1a2660ec2 | 6 | * You may obtain a copy of the License at |
rgrover1 | 710:b2e1a2660ec2 | 7 | * |
rgrover1 | 710:b2e1a2660ec2 | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
rgrover1 | 710:b2e1a2660ec2 | 9 | * |
rgrover1 | 710:b2e1a2660ec2 | 10 | * Unless required by applicable law or agreed to in writing, software |
rgrover1 | 710:b2e1a2660ec2 | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
rgrover1 | 710:b2e1a2660ec2 | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
rgrover1 | 710:b2e1a2660ec2 | 13 | * See the License for the specific language governing permissions and |
rgrover1 | 710:b2e1a2660ec2 | 14 | * limitations under the License. |
rgrover1 | 710:b2e1a2660ec2 | 15 | */ |
rgrover1 | 710:b2e1a2660ec2 | 16 | |
rgrover1 | 710:b2e1a2660ec2 | 17 | #ifndef __UUID_H__ |
rgrover1 | 710:b2e1a2660ec2 | 18 | #define __UUID_H__ |
rgrover1 | 710:b2e1a2660ec2 | 19 | |
rgrover1 | 710:b2e1a2660ec2 | 20 | #include <stdint.h> |
rgrover1 | 710:b2e1a2660ec2 | 21 | #include <string.h> |
rgrover1 | 710:b2e1a2660ec2 | 22 | |
rgrover1 | 710:b2e1a2660ec2 | 23 | #include "blecommon.h" |
rgrover1 | 710:b2e1a2660ec2 | 24 | |
rgrover1 | 1022:306c409f6c09 | 25 | static uint16_t char2int(char c) { |
rgrover1 | 1022:306c409f6c09 | 26 | if ((c >= '0') && (c <= '9')) { |
rgrover1 | 1022:306c409f6c09 | 27 | return c - '0'; |
rgrover1 | 1022:306c409f6c09 | 28 | } else if ((c >= 'a') && (c <= 'f')) { |
rgrover1 | 1022:306c409f6c09 | 29 | return c - 'a' + 10; |
rgrover1 | 1022:306c409f6c09 | 30 | } else if ((c >= 'A') && (c <= 'F')) { |
rgrover1 | 1022:306c409f6c09 | 31 | return c - 'A' + 10; |
rgrover1 | 1022:306c409f6c09 | 32 | } else { |
rgrover1 | 1022:306c409f6c09 | 33 | return 0; |
rgrover1 | 1022:306c409f6c09 | 34 | } |
rgrover1 | 1022:306c409f6c09 | 35 | } |
rgrover1 | 1022:306c409f6c09 | 36 | |
rgrover1 | 710:b2e1a2660ec2 | 37 | class UUID { |
rgrover1 | 710:b2e1a2660ec2 | 38 | public: |
rgrover1 | 710:b2e1a2660ec2 | 39 | enum UUID_Type_t { |
rgrover1 | 993:4d62b7967c11 | 40 | UUID_TYPE_SHORT = 0, // Short BLE UUID. |
rgrover1 | 993:4d62b7967c11 | 41 | UUID_TYPE_LONG = 1 // Full 128-bit UUID. |
rgrover1 | 710:b2e1a2660ec2 | 42 | }; |
rgrover1 | 710:b2e1a2660ec2 | 43 | |
rgrover1 | 710:b2e1a2660ec2 | 44 | typedef uint16_t ShortUUIDBytes_t; |
rgrover1 | 710:b2e1a2660ec2 | 45 | |
rgrover1 | 710:b2e1a2660ec2 | 46 | static const unsigned LENGTH_OF_LONG_UUID = 16; |
rgrover1 | 710:b2e1a2660ec2 | 47 | typedef uint8_t LongUUIDBytes_t[LENGTH_OF_LONG_UUID]; |
rgrover1 | 710:b2e1a2660ec2 | 48 | |
rgrover1 | 710:b2e1a2660ec2 | 49 | public: |
rgrover1 | 1022:306c409f6c09 | 50 | |
rgrover1 | 1022:306c409f6c09 | 51 | /** |
rgrover1 | 1022:306c409f6c09 | 52 | * Creates a new 128-bit UUID. |
rgrover1 | 1022:306c409f6c09 | 53 | * |
rgrover1 | 1022:306c409f6c09 | 54 | * @note The UUID is a unique 128-bit (16 byte) ID used to identify |
rgrover1 | 1022:306c409f6c09 | 55 | * different service or characteristics on the BLE device. |
rgrover1 | 1022:306c409f6c09 | 56 | * |
rgrover1 | 1022:306c409f6c09 | 57 | * @param stringUUID |
rgrover1 | 1022:306c409f6c09 | 58 | * The 128-bit (16-byte) UUID as a human readable const-string. |
rgrover1 | 1022:306c409f6c09 | 59 | * Format: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX |
rgrover1 | 1022:306c409f6c09 | 60 | * Upper and lower case supported. Hyphens are optional, but only |
rgrover1 | 1022:306c409f6c09 | 61 | * upto four of them. The UUID is stored internally as a 16 byte |
rgrover1 | 1022:306c409f6c09 | 62 | * array, LSB (little endian), which is opposite from the string. |
rgrover1 | 1022:306c409f6c09 | 63 | */ |
rgrover1 | 1022:306c409f6c09 | 64 | UUID(const char* stringUUID) : type(UUID_TYPE_LONG), baseUUID(), shortUUID(0) { |
rgrover1 | 1022:306c409f6c09 | 65 | bool nibble = false; |
rgrover1 | 1022:306c409f6c09 | 66 | uint8_t byte = 0; |
rgrover1 | 1022:306c409f6c09 | 67 | size_t baseIndex = 0; |
rgrover1 | 1022:306c409f6c09 | 68 | |
rgrover1 | 1022:306c409f6c09 | 69 | // Iterate through string, abort if NULL is encountered prematurely. |
rgrover1 | 1022:306c409f6c09 | 70 | // Ignore upto four hyphens. Reverse endian when storing internally. |
rgrover1 | 1022:306c409f6c09 | 71 | for (size_t index = 0; (index < 36) && (baseIndex < LENGTH_OF_LONG_UUID); index++) { |
rgrover1 | 1022:306c409f6c09 | 72 | if (stringUUID[index] == '\0') { |
rgrover1 | 1022:306c409f6c09 | 73 | // error abort |
rgrover1 | 1022:306c409f6c09 | 74 | break; |
rgrover1 | 1022:306c409f6c09 | 75 | } else if (stringUUID[index] == '-') { |
rgrover1 | 1022:306c409f6c09 | 76 | // ignore hyphen |
rgrover1 | 1022:306c409f6c09 | 77 | continue; |
rgrover1 | 1022:306c409f6c09 | 78 | } else if (nibble) { |
rgrover1 | 1022:306c409f6c09 | 79 | // got second nibble |
rgrover1 | 1022:306c409f6c09 | 80 | byte |= char2int(stringUUID[index]); |
rgrover1 | 1022:306c409f6c09 | 81 | nibble = false; |
rgrover1 | 1022:306c409f6c09 | 82 | |
rgrover1 | 1022:306c409f6c09 | 83 | // reverse endian |
rgrover1 | 1022:306c409f6c09 | 84 | baseUUID[LENGTH_OF_LONG_UUID - 1 - baseIndex++] = byte; |
rgrover1 | 1022:306c409f6c09 | 85 | } else { |
rgrover1 | 1022:306c409f6c09 | 86 | // got first nibble |
rgrover1 | 1022:306c409f6c09 | 87 | byte = char2int(stringUUID[index]) << 4; |
rgrover1 | 1022:306c409f6c09 | 88 | nibble = true; |
rgrover1 | 1022:306c409f6c09 | 89 | } |
rgrover1 | 1022:306c409f6c09 | 90 | } |
rgrover1 | 1022:306c409f6c09 | 91 | } |
rgrover1 | 1022:306c409f6c09 | 92 | |
rgrover1 | 710:b2e1a2660ec2 | 93 | /** |
rgrover1 | 993:4d62b7967c11 | 94 | * Creates a new 128-bit UUID. |
rgrover1 | 710:b2e1a2660ec2 | 95 | * |
rgrover1 | 710:b2e1a2660ec2 | 96 | * @note The UUID is a unique 128-bit (16 byte) ID used to identify |
rgrover1 | 710:b2e1a2660ec2 | 97 | * different service or characteristics on the BLE device. |
rgrover1 | 710:b2e1a2660ec2 | 98 | * |
rgrover1 | 710:b2e1a2660ec2 | 99 | * @param longUUID |
rgrover1 | 1022:306c409f6c09 | 100 | * The 128-bit (16-byte) UUID value, LSB first (little-endian). |
rgrover1 | 710:b2e1a2660ec2 | 101 | */ |
rgrover1 | 710:b2e1a2660ec2 | 102 | UUID(const LongUUIDBytes_t longUUID) : type(UUID_TYPE_LONG), baseUUID(), shortUUID(0) { |
rgrover1 | 710:b2e1a2660ec2 | 103 | setupLong(longUUID); |
rgrover1 | 710:b2e1a2660ec2 | 104 | } |
rgrover1 | 710:b2e1a2660ec2 | 105 | |
rgrover1 | 710:b2e1a2660ec2 | 106 | /** |
rgrover1 | 993:4d62b7967c11 | 107 | * Creates a new 16-bit UUID. |
rgrover1 | 710:b2e1a2660ec2 | 108 | * |
rgrover1 | 710:b2e1a2660ec2 | 109 | * @note The UUID is a unique 16-bit (2 byte) ID used to identify |
rgrover1 | 710:b2e1a2660ec2 | 110 | * different service or characteristics on the BLE device. |
rgrover1 | 710:b2e1a2660ec2 | 111 | * |
rgrover1 | 710:b2e1a2660ec2 | 112 | * For efficiency, and because 16 bytes would take a large chunk of the |
rgrover1 | 710:b2e1a2660ec2 | 113 | * 27-byte data payload length of the Link Layer, the BLE specification adds |
rgrover1 | 710:b2e1a2660ec2 | 114 | * two additional UUID formats: 16-bit and 32-bit UUIDs. These shortened |
rgrover1 | 710:b2e1a2660ec2 | 115 | * formats can be used only with UUIDs that are defined in the Bluetooth |
rgrover1 | 993:4d62b7967c11 | 116 | * specification (listed by the Bluetooth SIG as standard |
rgrover1 | 710:b2e1a2660ec2 | 117 | * Bluetooth UUIDs). |
rgrover1 | 710:b2e1a2660ec2 | 118 | * |
rgrover1 | 710:b2e1a2660ec2 | 119 | * To reconstruct the full 128-bit UUID from the shortened version, insert |
rgrover1 | 710:b2e1a2660ec2 | 120 | * the 16-bit short value (indicated by xxxx, including leading zeros) into |
rgrover1 | 710:b2e1a2660ec2 | 121 | * the Bluetooth Base UUID: |
rgrover1 | 710:b2e1a2660ec2 | 122 | * |
rgrover1 | 710:b2e1a2660ec2 | 123 | * 0000xxxx-0000-1000-8000-00805F9B34FB |
rgrover1 | 710:b2e1a2660ec2 | 124 | * |
rgrover1 | 710:b2e1a2660ec2 | 125 | * @note Shortening is not available for UUIDs that are not derived from the |
rgrover1 | 710:b2e1a2660ec2 | 126 | * Bluetooth Base UUID. Such non-standard UUIDs are commonly called |
rgrover1 | 710:b2e1a2660ec2 | 127 | * vendor-specific UUIDs. In these cases, you’ll need to use the full |
rgrover1 | 710:b2e1a2660ec2 | 128 | * 128-bit UUID value at all times. |
rgrover1 | 710:b2e1a2660ec2 | 129 | * |
rgrover1 | 993:4d62b7967c11 | 130 | * @note We don't yet support 32-bit shortened UUIDs. |
rgrover1 | 710:b2e1a2660ec2 | 131 | */ |
rgrover1 | 911:885ee648c6ab | 132 | UUID(ShortUUIDBytes_t _shortUUID) : type(UUID_TYPE_SHORT), baseUUID(), shortUUID(_shortUUID) { |
rgrover1 | 993:4d62b7967c11 | 133 | /* Empty */ |
rgrover1 | 710:b2e1a2660ec2 | 134 | } |
rgrover1 | 710:b2e1a2660ec2 | 135 | |
rgrover1 | 710:b2e1a2660ec2 | 136 | UUID(const UUID &source) { |
rgrover1 | 710:b2e1a2660ec2 | 137 | type = source.type; |
rgrover1 | 710:b2e1a2660ec2 | 138 | shortUUID = source.shortUUID; |
rgrover1 | 710:b2e1a2660ec2 | 139 | memcpy(baseUUID, source.baseUUID, LENGTH_OF_LONG_UUID); |
rgrover1 | 710:b2e1a2660ec2 | 140 | } |
rgrover1 | 710:b2e1a2660ec2 | 141 | |
rgrover1 | 710:b2e1a2660ec2 | 142 | UUID(void) : type(UUID_TYPE_SHORT), shortUUID(BLE_UUID_UNKNOWN) { |
rgrover1 | 710:b2e1a2660ec2 | 143 | /* empty */ |
rgrover1 | 710:b2e1a2660ec2 | 144 | } |
rgrover1 | 710:b2e1a2660ec2 | 145 | |
rgrover1 | 710:b2e1a2660ec2 | 146 | /** |
rgrover1 | 993:4d62b7967c11 | 147 | * Fill in a 128-bit UUID; this is useful when the UUID isn't known at the time of the object construction. |
rgrover1 | 710:b2e1a2660ec2 | 148 | */ |
rgrover1 | 710:b2e1a2660ec2 | 149 | void setupLong(const LongUUIDBytes_t longUUID) { |
rgrover1 | 710:b2e1a2660ec2 | 150 | type = UUID_TYPE_LONG; |
rgrover1 | 710:b2e1a2660ec2 | 151 | memcpy(baseUUID, longUUID, LENGTH_OF_LONG_UUID); |
rgrover1 | 1022:306c409f6c09 | 152 | shortUUID = (uint16_t)((longUUID[13] << 8) | (longUUID[12])); |
rgrover1 | 710:b2e1a2660ec2 | 153 | } |
rgrover1 | 710:b2e1a2660ec2 | 154 | |
rgrover1 | 710:b2e1a2660ec2 | 155 | public: |
rgrover1 | 710:b2e1a2660ec2 | 156 | UUID_Type_t shortOrLong(void) const {return type; } |
rgrover1 | 710:b2e1a2660ec2 | 157 | const uint8_t *getBaseUUID(void) const { |
rgrover1 | 710:b2e1a2660ec2 | 158 | if (type == UUID_TYPE_SHORT) { |
rgrover1 | 710:b2e1a2660ec2 | 159 | return (const uint8_t*)&shortUUID; |
rgrover1 | 710:b2e1a2660ec2 | 160 | } else { |
rgrover1 | 710:b2e1a2660ec2 | 161 | return baseUUID; |
rgrover1 | 710:b2e1a2660ec2 | 162 | } |
rgrover1 | 710:b2e1a2660ec2 | 163 | } |
rgrover1 | 710:b2e1a2660ec2 | 164 | |
rgrover1 | 710:b2e1a2660ec2 | 165 | ShortUUIDBytes_t getShortUUID(void) const {return shortUUID;} |
rgrover1 | 710:b2e1a2660ec2 | 166 | uint8_t getLen(void) const { |
rgrover1 | 710:b2e1a2660ec2 | 167 | return ((type == UUID_TYPE_SHORT) ? sizeof(ShortUUIDBytes_t) : LENGTH_OF_LONG_UUID); |
rgrover1 | 710:b2e1a2660ec2 | 168 | } |
rgrover1 | 710:b2e1a2660ec2 | 169 | |
rgrover1 | 710:b2e1a2660ec2 | 170 | bool operator== (const UUID &other) const { |
rgrover1 | 710:b2e1a2660ec2 | 171 | if ((this->type == UUID_TYPE_SHORT) && (other.type == UUID_TYPE_SHORT) && |
rgrover1 | 710:b2e1a2660ec2 | 172 | (this->shortUUID == other.shortUUID)) { |
rgrover1 | 710:b2e1a2660ec2 | 173 | return true; |
rgrover1 | 710:b2e1a2660ec2 | 174 | } |
rgrover1 | 710:b2e1a2660ec2 | 175 | |
rgrover1 | 710:b2e1a2660ec2 | 176 | if ((this->type == UUID_TYPE_LONG) && (other.type == UUID_TYPE_LONG) && |
rgrover1 | 710:b2e1a2660ec2 | 177 | (memcmp(this->baseUUID, other.baseUUID, LENGTH_OF_LONG_UUID) == 0)) { |
rgrover1 | 710:b2e1a2660ec2 | 178 | return true; |
rgrover1 | 710:b2e1a2660ec2 | 179 | } |
rgrover1 | 710:b2e1a2660ec2 | 180 | |
rgrover1 | 710:b2e1a2660ec2 | 181 | return false; |
rgrover1 | 710:b2e1a2660ec2 | 182 | } |
rgrover1 | 710:b2e1a2660ec2 | 183 | |
rgrover1 | 710:b2e1a2660ec2 | 184 | bool operator!= (const UUID &other) const { |
rgrover1 | 710:b2e1a2660ec2 | 185 | return !(*this == other); |
rgrover1 | 710:b2e1a2660ec2 | 186 | } |
rgrover1 | 710:b2e1a2660ec2 | 187 | |
rgrover1 | 710:b2e1a2660ec2 | 188 | private: |
rgrover1 | 710:b2e1a2660ec2 | 189 | UUID_Type_t type; // UUID_TYPE_SHORT or UUID_TYPE_LONG |
rgrover1 | 993:4d62b7967c11 | 190 | LongUUIDBytes_t baseUUID; /* The base of the long UUID (if |
rgrover1 | 710:b2e1a2660ec2 | 191 | * used). Note: bytes 12 and 13 (counting from LSB) |
rgrover1 | 710:b2e1a2660ec2 | 192 | * are zeroed out to allow comparison with other long |
rgrover1 | 993:4d62b7967c11 | 193 | * UUIDs, which differ only in the 16-bit relative |
rgrover1 | 710:b2e1a2660ec2 | 194 | * part.*/ |
rgrover1 | 993:4d62b7967c11 | 195 | ShortUUIDBytes_t shortUUID; // 16 bit UUID (byte 2-3 using with base). |
rgrover1 | 710:b2e1a2660ec2 | 196 | }; |
rgrover1 | 710:b2e1a2660ec2 | 197 | |
rgrover1 | 710:b2e1a2660ec2 | 198 | #endif // ifndef __UUID_H__ |