prova invio BLE

Dependents:   BLE_HeartRate_IDB04A1

Fork of BLE_API by Bluetooth Low Energy

Committer:
rgrover1
Date:
Thu Nov 26 12:52:37 2015 +0000
Revision:
980:07ce7d9ed5ff
Child:
986:5292837107a3
Child:
995:287604cca609
Synchronized with git rev fa755f1a
Author: Rohit Grover
Restoring previous layout of doxygen related files.

These files will undergo further re-organization in the coming
weeks. It is too early to fix on creating a subfolder for doxygen (as
the original pull request suggested).

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 980:07ce7d9ed5ff 1 # Doxyfile 1.8.4
rgrover1 980:07ce7d9ed5ff 2
rgrover1 980:07ce7d9ed5ff 3 # This file describes the settings to be used by the documentation system
rgrover1 980:07ce7d9ed5ff 4 # doxygen (www.doxygen.org) for a project.
rgrover1 980:07ce7d9ed5ff 5 #
rgrover1 980:07ce7d9ed5ff 6 # All text after a double hash (##) is considered a comment and is placed
rgrover1 980:07ce7d9ed5ff 7 # in front of the TAG it is preceding .
rgrover1 980:07ce7d9ed5ff 8 # All text after a hash (#) is considered a comment and will be ignored.
rgrover1 980:07ce7d9ed5ff 9 # The format is:
rgrover1 980:07ce7d9ed5ff 10 # TAG = value [value, ...]
rgrover1 980:07ce7d9ed5ff 11 # For lists items can also be appended using:
rgrover1 980:07ce7d9ed5ff 12 # TAG += value [value, ...]
rgrover1 980:07ce7d9ed5ff 13 # Values that contain spaces should be placed between quotes (" ").
rgrover1 980:07ce7d9ed5ff 14
rgrover1 980:07ce7d9ed5ff 15 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 16 # Project related configuration options
rgrover1 980:07ce7d9ed5ff 17 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 18
rgrover1 980:07ce7d9ed5ff 19 # This tag specifies the encoding used for all characters in the config file
rgrover1 980:07ce7d9ed5ff 20 # that follow. The default is UTF-8 which is also the encoding used for all
rgrover1 980:07ce7d9ed5ff 21 # text before the first occurrence of this tag. Doxygen uses libiconv (or the
rgrover1 980:07ce7d9ed5ff 22 # iconv built into libc) for the transcoding. See
rgrover1 980:07ce7d9ed5ff 23 # http://www.gnu.org/software/libiconv for the list of possible encodings.
rgrover1 980:07ce7d9ed5ff 24
rgrover1 980:07ce7d9ed5ff 25 DOXYFILE_ENCODING = UTF-8
rgrover1 980:07ce7d9ed5ff 26
rgrover1 980:07ce7d9ed5ff 27 # The PROJECT_NAME tag is a single word (or sequence of words) that should
rgrover1 980:07ce7d9ed5ff 28 # identify the project. Note that if you do not use Doxywizard you need
rgrover1 980:07ce7d9ed5ff 29 # to put quotes around the project name if it contains spaces.
rgrover1 980:07ce7d9ed5ff 30
rgrover1 980:07ce7d9ed5ff 31 PROJECT_NAME = "BLE API"
rgrover1 980:07ce7d9ed5ff 32
rgrover1 980:07ce7d9ed5ff 33 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
rgrover1 980:07ce7d9ed5ff 34 # This could be handy for archiving the generated documentation or
rgrover1 980:07ce7d9ed5ff 35 # if some version control system is used.
rgrover1 980:07ce7d9ed5ff 36
rgrover1 980:07ce7d9ed5ff 37 PROJECT_NUMBER = v2
rgrover1 980:07ce7d9ed5ff 38
rgrover1 980:07ce7d9ed5ff 39 # Using the PROJECT_BRIEF tag one can provide an optional one line description
rgrover1 980:07ce7d9ed5ff 40 # for a project that appears at the top of each page and should give viewer
rgrover1 980:07ce7d9ed5ff 41 # a quick idea about the purpose of the project. Keep the description short.
rgrover1 980:07ce7d9ed5ff 42
rgrover1 980:07ce7d9ed5ff 43 PROJECT_BRIEF = "An abstraction for using Bluetooth Low Energy."
rgrover1 980:07ce7d9ed5ff 44
rgrover1 980:07ce7d9ed5ff 45 # With the PROJECT_LOGO tag one can specify an logo or icon that is
rgrover1 980:07ce7d9ed5ff 46 # included in the documentation. The maximum height of the logo should not
rgrover1 980:07ce7d9ed5ff 47 # exceed 55 pixels and the maximum width should not exceed 200 pixels.
rgrover1 980:07ce7d9ed5ff 48 # Doxygen will copy the logo to the output directory.
rgrover1 980:07ce7d9ed5ff 49
rgrover1 980:07ce7d9ed5ff 50 PROJECT_LOGO =
rgrover1 980:07ce7d9ed5ff 51
rgrover1 980:07ce7d9ed5ff 52 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
rgrover1 980:07ce7d9ed5ff 53 # base path where the generated documentation will be put.
rgrover1 980:07ce7d9ed5ff 54 # If a relative path is entered, it will be relative to the location
rgrover1 980:07ce7d9ed5ff 55 # where doxygen was started. If left blank the current directory will be used.
rgrover1 980:07ce7d9ed5ff 56
rgrover1 980:07ce7d9ed5ff 57 OUTPUT_DIRECTORY = apidoc/
rgrover1 980:07ce7d9ed5ff 58
rgrover1 980:07ce7d9ed5ff 59 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
rgrover1 980:07ce7d9ed5ff 60 # 4096 sub-directories (in 2 levels) under the output directory of each output
rgrover1 980:07ce7d9ed5ff 61 # format and will distribute the generated files over these directories.
rgrover1 980:07ce7d9ed5ff 62 # Enabling this option can be useful when feeding doxygen a huge amount of
rgrover1 980:07ce7d9ed5ff 63 # source files, where putting all generated files in the same directory would
rgrover1 980:07ce7d9ed5ff 64 # otherwise cause performance problems for the file system.
rgrover1 980:07ce7d9ed5ff 65
rgrover1 980:07ce7d9ed5ff 66 CREATE_SUBDIRS = NO
rgrover1 980:07ce7d9ed5ff 67
rgrover1 980:07ce7d9ed5ff 68 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
rgrover1 980:07ce7d9ed5ff 69 # documentation generated by doxygen is written. Doxygen will use this
rgrover1 980:07ce7d9ed5ff 70 # information to generate all constant output in the proper language.
rgrover1 980:07ce7d9ed5ff 71 # The default language is English, other supported languages are:
rgrover1 980:07ce7d9ed5ff 72 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
rgrover1 980:07ce7d9ed5ff 73 # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
rgrover1 980:07ce7d9ed5ff 74 # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
rgrover1 980:07ce7d9ed5ff 75 # messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian,
rgrover1 980:07ce7d9ed5ff 76 # Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic,
rgrover1 980:07ce7d9ed5ff 77 # Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
rgrover1 980:07ce7d9ed5ff 78
rgrover1 980:07ce7d9ed5ff 79 OUTPUT_LANGUAGE = English
rgrover1 980:07ce7d9ed5ff 80
rgrover1 980:07ce7d9ed5ff 81 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 82 # include brief member descriptions after the members that are listed in
rgrover1 980:07ce7d9ed5ff 83 # the file and class documentation (similar to JavaDoc).
rgrover1 980:07ce7d9ed5ff 84 # Set to NO to disable this.
rgrover1 980:07ce7d9ed5ff 85
rgrover1 980:07ce7d9ed5ff 86 BRIEF_MEMBER_DESC = YES
rgrover1 980:07ce7d9ed5ff 87
rgrover1 980:07ce7d9ed5ff 88 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
rgrover1 980:07ce7d9ed5ff 89 # the brief description of a member or function before the detailed description.
rgrover1 980:07ce7d9ed5ff 90 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
rgrover1 980:07ce7d9ed5ff 91 # brief descriptions will be completely suppressed.
rgrover1 980:07ce7d9ed5ff 92
rgrover1 980:07ce7d9ed5ff 93 REPEAT_BRIEF = YES
rgrover1 980:07ce7d9ed5ff 94
rgrover1 980:07ce7d9ed5ff 95 # This tag implements a quasi-intelligent brief description abbreviator
rgrover1 980:07ce7d9ed5ff 96 # that is used to form the text in various listings. Each string
rgrover1 980:07ce7d9ed5ff 97 # in this list, if found as the leading text of the brief description, will be
rgrover1 980:07ce7d9ed5ff 98 # stripped from the text and the result after processing the whole list, is
rgrover1 980:07ce7d9ed5ff 99 # used as the annotated text. Otherwise, the brief description is used as-is.
rgrover1 980:07ce7d9ed5ff 100 # If left blank, the following values are used ("$name" is automatically
rgrover1 980:07ce7d9ed5ff 101 # replaced with the name of the entity): "The $name class" "The $name widget"
rgrover1 980:07ce7d9ed5ff 102 # "The $name file" "is" "provides" "specifies" "contains"
rgrover1 980:07ce7d9ed5ff 103 # "represents" "a" "an" "the"
rgrover1 980:07ce7d9ed5ff 104
rgrover1 980:07ce7d9ed5ff 105 ABBREVIATE_BRIEF = "The $name class" \
rgrover1 980:07ce7d9ed5ff 106 "The $name widget" \
rgrover1 980:07ce7d9ed5ff 107 "The $name file" \
rgrover1 980:07ce7d9ed5ff 108 is \
rgrover1 980:07ce7d9ed5ff 109 provides \
rgrover1 980:07ce7d9ed5ff 110 specifies \
rgrover1 980:07ce7d9ed5ff 111 contains \
rgrover1 980:07ce7d9ed5ff 112 represents \
rgrover1 980:07ce7d9ed5ff 113 a \
rgrover1 980:07ce7d9ed5ff 114 an \
rgrover1 980:07ce7d9ed5ff 115 the
rgrover1 980:07ce7d9ed5ff 116
rgrover1 980:07ce7d9ed5ff 117 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
rgrover1 980:07ce7d9ed5ff 118 # Doxygen will generate a detailed section even if there is only a brief
rgrover1 980:07ce7d9ed5ff 119 # description.
rgrover1 980:07ce7d9ed5ff 120
rgrover1 980:07ce7d9ed5ff 121 ALWAYS_DETAILED_SEC = NO
rgrover1 980:07ce7d9ed5ff 122
rgrover1 980:07ce7d9ed5ff 123 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
rgrover1 980:07ce7d9ed5ff 124 # inherited members of a class in the documentation of that class as if those
rgrover1 980:07ce7d9ed5ff 125 # members were ordinary class members. Constructors, destructors and assignment
rgrover1 980:07ce7d9ed5ff 126 # operators of the base classes will not be shown.
rgrover1 980:07ce7d9ed5ff 127
rgrover1 980:07ce7d9ed5ff 128 INLINE_INHERITED_MEMB = NO
rgrover1 980:07ce7d9ed5ff 129
rgrover1 980:07ce7d9ed5ff 130 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
rgrover1 980:07ce7d9ed5ff 131 # path before files name in the file list and in the header files. If set
rgrover1 980:07ce7d9ed5ff 132 # to NO the shortest path that makes the file name unique will be used.
rgrover1 980:07ce7d9ed5ff 133
rgrover1 980:07ce7d9ed5ff 134 FULL_PATH_NAMES = NO
rgrover1 980:07ce7d9ed5ff 135
rgrover1 980:07ce7d9ed5ff 136 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
rgrover1 980:07ce7d9ed5ff 137 # can be used to strip a user-defined part of the path. Stripping is
rgrover1 980:07ce7d9ed5ff 138 # only done if one of the specified strings matches the left-hand part of
rgrover1 980:07ce7d9ed5ff 139 # the path. The tag can be used to show relative paths in the file list.
rgrover1 980:07ce7d9ed5ff 140 # If left blank the directory from which doxygen is run is used as the
rgrover1 980:07ce7d9ed5ff 141 # path to strip. Note that you specify absolute paths here, but also
rgrover1 980:07ce7d9ed5ff 142 # relative paths, which will be relative from the directory where doxygen is
rgrover1 980:07ce7d9ed5ff 143 # started.
rgrover1 980:07ce7d9ed5ff 144
rgrover1 980:07ce7d9ed5ff 145 STRIP_FROM_PATH =
rgrover1 980:07ce7d9ed5ff 146
rgrover1 980:07ce7d9ed5ff 147 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
rgrover1 980:07ce7d9ed5ff 148 # the path mentioned in the documentation of a class, which tells
rgrover1 980:07ce7d9ed5ff 149 # the reader which header file to include in order to use a class.
rgrover1 980:07ce7d9ed5ff 150 # If left blank only the name of the header file containing the class
rgrover1 980:07ce7d9ed5ff 151 # definition is used. Otherwise one should specify the include paths that
rgrover1 980:07ce7d9ed5ff 152 # are normally passed to the compiler using the -I flag.
rgrover1 980:07ce7d9ed5ff 153
rgrover1 980:07ce7d9ed5ff 154 STRIP_FROM_INC_PATH =
rgrover1 980:07ce7d9ed5ff 155
rgrover1 980:07ce7d9ed5ff 156 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
rgrover1 980:07ce7d9ed5ff 157 # (but less readable) file names. This can be useful if your file system
rgrover1 980:07ce7d9ed5ff 158 # doesn't support long names like on DOS, Mac, or CD-ROM.
rgrover1 980:07ce7d9ed5ff 159
rgrover1 980:07ce7d9ed5ff 160 SHORT_NAMES = NO
rgrover1 980:07ce7d9ed5ff 161
rgrover1 980:07ce7d9ed5ff 162 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
rgrover1 980:07ce7d9ed5ff 163 # will interpret the first line (until the first dot) of a JavaDoc-style
rgrover1 980:07ce7d9ed5ff 164 # comment as the brief description. If set to NO, the JavaDoc
rgrover1 980:07ce7d9ed5ff 165 # comments will behave just like regular Qt-style comments
rgrover1 980:07ce7d9ed5ff 166 # (thus requiring an explicit @brief command for a brief description.)
rgrover1 980:07ce7d9ed5ff 167
rgrover1 980:07ce7d9ed5ff 168 JAVADOC_AUTOBRIEF = YES
rgrover1 980:07ce7d9ed5ff 169
rgrover1 980:07ce7d9ed5ff 170 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
rgrover1 980:07ce7d9ed5ff 171 # interpret the first line (until the first dot) of a Qt-style
rgrover1 980:07ce7d9ed5ff 172 # comment as the brief description. If set to NO, the comments
rgrover1 980:07ce7d9ed5ff 173 # will behave just like regular Qt-style comments (thus requiring
rgrover1 980:07ce7d9ed5ff 174 # an explicit \brief command for a brief description.)
rgrover1 980:07ce7d9ed5ff 175
rgrover1 980:07ce7d9ed5ff 176 QT_AUTOBRIEF = NO
rgrover1 980:07ce7d9ed5ff 177
rgrover1 980:07ce7d9ed5ff 178 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
rgrover1 980:07ce7d9ed5ff 179 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
rgrover1 980:07ce7d9ed5ff 180 # comments) as a brief description. This used to be the default behaviour.
rgrover1 980:07ce7d9ed5ff 181 # The new default is to treat a multi-line C++ comment block as a detailed
rgrover1 980:07ce7d9ed5ff 182 # description. Set this tag to YES if you prefer the old behaviour instead.
rgrover1 980:07ce7d9ed5ff 183
rgrover1 980:07ce7d9ed5ff 184 MULTILINE_CPP_IS_BRIEF = NO
rgrover1 980:07ce7d9ed5ff 185
rgrover1 980:07ce7d9ed5ff 186 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
rgrover1 980:07ce7d9ed5ff 187 # member inherits the documentation from any documented member that it
rgrover1 980:07ce7d9ed5ff 188 # re-implements.
rgrover1 980:07ce7d9ed5ff 189
rgrover1 980:07ce7d9ed5ff 190 INHERIT_DOCS = YES
rgrover1 980:07ce7d9ed5ff 191
rgrover1 980:07ce7d9ed5ff 192 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
rgrover1 980:07ce7d9ed5ff 193 # a new page for each member. If set to NO, the documentation of a member will
rgrover1 980:07ce7d9ed5ff 194 # be part of the file/class/namespace that contains it.
rgrover1 980:07ce7d9ed5ff 195
rgrover1 980:07ce7d9ed5ff 196 SEPARATE_MEMBER_PAGES = NO
rgrover1 980:07ce7d9ed5ff 197
rgrover1 980:07ce7d9ed5ff 198 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
rgrover1 980:07ce7d9ed5ff 199 # Doxygen uses this value to replace tabs by spaces in code fragments.
rgrover1 980:07ce7d9ed5ff 200
rgrover1 980:07ce7d9ed5ff 201 TAB_SIZE = 4
rgrover1 980:07ce7d9ed5ff 202
rgrover1 980:07ce7d9ed5ff 203 # This tag can be used to specify a number of aliases that acts
rgrover1 980:07ce7d9ed5ff 204 # as commands in the documentation. An alias has the form "name=value".
rgrover1 980:07ce7d9ed5ff 205 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
rgrover1 980:07ce7d9ed5ff 206 # put the command \sideeffect (or @sideeffect) in the documentation, which
rgrover1 980:07ce7d9ed5ff 207 # will result in a user-defined paragraph with heading "Side Effects:".
rgrover1 980:07ce7d9ed5ff 208 # You can put \n's in the value part of an alias to insert newlines.
rgrover1 980:07ce7d9ed5ff 209
rgrover1 980:07ce7d9ed5ff 210 ALIASES =
rgrover1 980:07ce7d9ed5ff 211
rgrover1 980:07ce7d9ed5ff 212 # This tag can be used to specify a number of word-keyword mappings (TCL only).
rgrover1 980:07ce7d9ed5ff 213 # A mapping has the form "name=value". For example adding
rgrover1 980:07ce7d9ed5ff 214 # "class=itcl::class" will allow you to use the command class in the
rgrover1 980:07ce7d9ed5ff 215 # itcl::class meaning.
rgrover1 980:07ce7d9ed5ff 216
rgrover1 980:07ce7d9ed5ff 217 TCL_SUBST =
rgrover1 980:07ce7d9ed5ff 218
rgrover1 980:07ce7d9ed5ff 219 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
rgrover1 980:07ce7d9ed5ff 220 # sources only. Doxygen will then generate output that is more tailored for C.
rgrover1 980:07ce7d9ed5ff 221 # For instance, some of the names that are used will be different. The list
rgrover1 980:07ce7d9ed5ff 222 # of all members will be omitted, etc.
rgrover1 980:07ce7d9ed5ff 223
rgrover1 980:07ce7d9ed5ff 224 OPTIMIZE_OUTPUT_FOR_C = NO
rgrover1 980:07ce7d9ed5ff 225
rgrover1 980:07ce7d9ed5ff 226 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
rgrover1 980:07ce7d9ed5ff 227 # sources only. Doxygen will then generate output that is more tailored for
rgrover1 980:07ce7d9ed5ff 228 # Java. For instance, namespaces will be presented as packages, qualified
rgrover1 980:07ce7d9ed5ff 229 # scopes will look different, etc.
rgrover1 980:07ce7d9ed5ff 230
rgrover1 980:07ce7d9ed5ff 231 OPTIMIZE_OUTPUT_JAVA = NO
rgrover1 980:07ce7d9ed5ff 232
rgrover1 980:07ce7d9ed5ff 233 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
rgrover1 980:07ce7d9ed5ff 234 # sources only. Doxygen will then generate output that is more tailored for
rgrover1 980:07ce7d9ed5ff 235 # Fortran.
rgrover1 980:07ce7d9ed5ff 236
rgrover1 980:07ce7d9ed5ff 237 OPTIMIZE_FOR_FORTRAN = NO
rgrover1 980:07ce7d9ed5ff 238
rgrover1 980:07ce7d9ed5ff 239 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
rgrover1 980:07ce7d9ed5ff 240 # sources. Doxygen will then generate output that is tailored for
rgrover1 980:07ce7d9ed5ff 241 # VHDL.
rgrover1 980:07ce7d9ed5ff 242
rgrover1 980:07ce7d9ed5ff 243 OPTIMIZE_OUTPUT_VHDL = NO
rgrover1 980:07ce7d9ed5ff 244
rgrover1 980:07ce7d9ed5ff 245 # Doxygen selects the parser to use depending on the extension of the files it
rgrover1 980:07ce7d9ed5ff 246 # parses. With this tag you can assign which parser to use for a given
rgrover1 980:07ce7d9ed5ff 247 # extension. Doxygen has a built-in mapping, but you can override or extend it
rgrover1 980:07ce7d9ed5ff 248 # using this tag. The format is ext=language, where ext is a file extension,
rgrover1 980:07ce7d9ed5ff 249 # and language is one of the parsers supported by doxygen: IDL, Java,
rgrover1 980:07ce7d9ed5ff 250 # Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C,
rgrover1 980:07ce7d9ed5ff 251 # C++. For instance to make doxygen treat .inc files as Fortran files (default
rgrover1 980:07ce7d9ed5ff 252 # is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note
rgrover1 980:07ce7d9ed5ff 253 # that for custom extensions you also need to set FILE_PATTERNS otherwise the
rgrover1 980:07ce7d9ed5ff 254 # files are not read by doxygen.
rgrover1 980:07ce7d9ed5ff 255
rgrover1 980:07ce7d9ed5ff 256 EXTENSION_MAPPING =
rgrover1 980:07ce7d9ed5ff 257
rgrover1 980:07ce7d9ed5ff 258 # If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
rgrover1 980:07ce7d9ed5ff 259 # comments according to the Markdown format, which allows for more readable
rgrover1 980:07ce7d9ed5ff 260 # documentation. See http://daringfireball.net/projects/markdown/ for details.
rgrover1 980:07ce7d9ed5ff 261 # The output of markdown processing is further processed by doxygen, so you
rgrover1 980:07ce7d9ed5ff 262 # can mix doxygen, HTML, and XML commands with Markdown formatting.
rgrover1 980:07ce7d9ed5ff 263 # Disable only in case of backward compatibilities issues.
rgrover1 980:07ce7d9ed5ff 264
rgrover1 980:07ce7d9ed5ff 265 MARKDOWN_SUPPORT = YES
rgrover1 980:07ce7d9ed5ff 266
rgrover1 980:07ce7d9ed5ff 267 # When enabled doxygen tries to link words that correspond to documented
rgrover1 980:07ce7d9ed5ff 268 # classes, or namespaces to their corresponding documentation. Such a link can
rgrover1 980:07ce7d9ed5ff 269 # be prevented in individual cases by by putting a % sign in front of the word
rgrover1 980:07ce7d9ed5ff 270 # or globally by setting AUTOLINK_SUPPORT to NO.
rgrover1 980:07ce7d9ed5ff 271
rgrover1 980:07ce7d9ed5ff 272 AUTOLINK_SUPPORT = YES
rgrover1 980:07ce7d9ed5ff 273
rgrover1 980:07ce7d9ed5ff 274 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
rgrover1 980:07ce7d9ed5ff 275 # to include (a tag file for) the STL sources as input, then you should
rgrover1 980:07ce7d9ed5ff 276 # set this tag to YES in order to let doxygen match functions declarations and
rgrover1 980:07ce7d9ed5ff 277 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
rgrover1 980:07ce7d9ed5ff 278 # func(std::string) {}). This also makes the inheritance and collaboration
rgrover1 980:07ce7d9ed5ff 279 # diagrams that involve STL classes more complete and accurate.
rgrover1 980:07ce7d9ed5ff 280
rgrover1 980:07ce7d9ed5ff 281 BUILTIN_STL_SUPPORT = NO
rgrover1 980:07ce7d9ed5ff 282
rgrover1 980:07ce7d9ed5ff 283 # If you use Microsoft's C++/CLI language, you should set this option to YES to
rgrover1 980:07ce7d9ed5ff 284 # enable parsing support.
rgrover1 980:07ce7d9ed5ff 285
rgrover1 980:07ce7d9ed5ff 286 CPP_CLI_SUPPORT = NO
rgrover1 980:07ce7d9ed5ff 287
rgrover1 980:07ce7d9ed5ff 288 # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
rgrover1 980:07ce7d9ed5ff 289 # Doxygen will parse them like normal C++ but will assume all classes use public
rgrover1 980:07ce7d9ed5ff 290 # instead of private inheritance when no explicit protection keyword is present.
rgrover1 980:07ce7d9ed5ff 291
rgrover1 980:07ce7d9ed5ff 292 SIP_SUPPORT = NO
rgrover1 980:07ce7d9ed5ff 293
rgrover1 980:07ce7d9ed5ff 294 # For Microsoft's IDL there are propget and propput attributes to indicate
rgrover1 980:07ce7d9ed5ff 295 # getter and setter methods for a property. Setting this option to YES (the
rgrover1 980:07ce7d9ed5ff 296 # default) will make doxygen replace the get and set methods by a property in
rgrover1 980:07ce7d9ed5ff 297 # the documentation. This will only work if the methods are indeed getting or
rgrover1 980:07ce7d9ed5ff 298 # setting a simple type. If this is not the case, or you want to show the
rgrover1 980:07ce7d9ed5ff 299 # methods anyway, you should set this option to NO.
rgrover1 980:07ce7d9ed5ff 300
rgrover1 980:07ce7d9ed5ff 301 IDL_PROPERTY_SUPPORT = YES
rgrover1 980:07ce7d9ed5ff 302
rgrover1 980:07ce7d9ed5ff 303 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
rgrover1 980:07ce7d9ed5ff 304 # tag is set to YES, then doxygen will reuse the documentation of the first
rgrover1 980:07ce7d9ed5ff 305 # member in the group (if any) for the other members of the group. By default
rgrover1 980:07ce7d9ed5ff 306 # all members of a group must be documented explicitly.
rgrover1 980:07ce7d9ed5ff 307
rgrover1 980:07ce7d9ed5ff 308 DISTRIBUTE_GROUP_DOC = NO
rgrover1 980:07ce7d9ed5ff 309
rgrover1 980:07ce7d9ed5ff 310 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
rgrover1 980:07ce7d9ed5ff 311 # the same type (for instance a group of public functions) to be put as a
rgrover1 980:07ce7d9ed5ff 312 # subgroup of that type (e.g. under the Public Functions section). Set it to
rgrover1 980:07ce7d9ed5ff 313 # NO to prevent subgrouping. Alternatively, this can be done per class using
rgrover1 980:07ce7d9ed5ff 314 # the \nosubgrouping command.
rgrover1 980:07ce7d9ed5ff 315
rgrover1 980:07ce7d9ed5ff 316 SUBGROUPING = YES
rgrover1 980:07ce7d9ed5ff 317
rgrover1 980:07ce7d9ed5ff 318 # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
rgrover1 980:07ce7d9ed5ff 319 # unions are shown inside the group in which they are included (e.g. using
rgrover1 980:07ce7d9ed5ff 320 # @ingroup) instead of on a separate page (for HTML and Man pages) or
rgrover1 980:07ce7d9ed5ff 321 # section (for LaTeX and RTF).
rgrover1 980:07ce7d9ed5ff 322
rgrover1 980:07ce7d9ed5ff 323 INLINE_GROUPED_CLASSES = NO
rgrover1 980:07ce7d9ed5ff 324
rgrover1 980:07ce7d9ed5ff 325 # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
rgrover1 980:07ce7d9ed5ff 326 # unions with only public data fields or simple typedef fields will be shown
rgrover1 980:07ce7d9ed5ff 327 # inline in the documentation of the scope in which they are defined (i.e. file,
rgrover1 980:07ce7d9ed5ff 328 # namespace, or group documentation), provided this scope is documented. If set
rgrover1 980:07ce7d9ed5ff 329 # to NO (the default), structs, classes, and unions are shown on a separate
rgrover1 980:07ce7d9ed5ff 330 # page (for HTML and Man pages) or section (for LaTeX and RTF).
rgrover1 980:07ce7d9ed5ff 331
rgrover1 980:07ce7d9ed5ff 332 INLINE_SIMPLE_STRUCTS = YES
rgrover1 980:07ce7d9ed5ff 333
rgrover1 980:07ce7d9ed5ff 334 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
rgrover1 980:07ce7d9ed5ff 335 # is documented as struct, union, or enum with the name of the typedef. So
rgrover1 980:07ce7d9ed5ff 336 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
rgrover1 980:07ce7d9ed5ff 337 # with name TypeT. When disabled the typedef will appear as a member of a file,
rgrover1 980:07ce7d9ed5ff 338 # namespace, or class. And the struct will be named TypeS. This can typically
rgrover1 980:07ce7d9ed5ff 339 # be useful for C code in case the coding convention dictates that all compound
rgrover1 980:07ce7d9ed5ff 340 # types are typedef'ed and only the typedef is referenced, never the tag name.
rgrover1 980:07ce7d9ed5ff 341
rgrover1 980:07ce7d9ed5ff 342 TYPEDEF_HIDES_STRUCT = NO
rgrover1 980:07ce7d9ed5ff 343
rgrover1 980:07ce7d9ed5ff 344 # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
rgrover1 980:07ce7d9ed5ff 345 # cache is used to resolve symbols given their name and scope. Since this can
rgrover1 980:07ce7d9ed5ff 346 # be an expensive process and often the same symbol appear multiple times in
rgrover1 980:07ce7d9ed5ff 347 # the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too
rgrover1 980:07ce7d9ed5ff 348 # small doxygen will become slower. If the cache is too large, memory is wasted.
rgrover1 980:07ce7d9ed5ff 349 # The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid
rgrover1 980:07ce7d9ed5ff 350 # range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536
rgrover1 980:07ce7d9ed5ff 351 # symbols.
rgrover1 980:07ce7d9ed5ff 352
rgrover1 980:07ce7d9ed5ff 353 LOOKUP_CACHE_SIZE = 0
rgrover1 980:07ce7d9ed5ff 354
rgrover1 980:07ce7d9ed5ff 355 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 356 # Build related configuration options
rgrover1 980:07ce7d9ed5ff 357 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 358
rgrover1 980:07ce7d9ed5ff 359 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
rgrover1 980:07ce7d9ed5ff 360 # documentation are documented, even if no documentation was available.
rgrover1 980:07ce7d9ed5ff 361 # Private class members and static file members will be hidden unless
rgrover1 980:07ce7d9ed5ff 362 # the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES
rgrover1 980:07ce7d9ed5ff 363
rgrover1 980:07ce7d9ed5ff 364 EXTRACT_ALL = YES
rgrover1 980:07ce7d9ed5ff 365
rgrover1 980:07ce7d9ed5ff 366 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
rgrover1 980:07ce7d9ed5ff 367 # will be included in the documentation.
rgrover1 980:07ce7d9ed5ff 368
rgrover1 980:07ce7d9ed5ff 369 EXTRACT_PRIVATE = YES
rgrover1 980:07ce7d9ed5ff 370
rgrover1 980:07ce7d9ed5ff 371 # If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
rgrover1 980:07ce7d9ed5ff 372 # scope will be included in the documentation.
rgrover1 980:07ce7d9ed5ff 373
rgrover1 980:07ce7d9ed5ff 374 EXTRACT_PACKAGE = NO
rgrover1 980:07ce7d9ed5ff 375
rgrover1 980:07ce7d9ed5ff 376 # If the EXTRACT_STATIC tag is set to YES all static members of a file
rgrover1 980:07ce7d9ed5ff 377 # will be included in the documentation.
rgrover1 980:07ce7d9ed5ff 378
rgrover1 980:07ce7d9ed5ff 379 EXTRACT_STATIC = YES
rgrover1 980:07ce7d9ed5ff 380
rgrover1 980:07ce7d9ed5ff 381 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
rgrover1 980:07ce7d9ed5ff 382 # defined locally in source files will be included in the documentation.
rgrover1 980:07ce7d9ed5ff 383 # If set to NO only classes defined in header files are included.
rgrover1 980:07ce7d9ed5ff 384
rgrover1 980:07ce7d9ed5ff 385 EXTRACT_LOCAL_CLASSES = YES
rgrover1 980:07ce7d9ed5ff 386
rgrover1 980:07ce7d9ed5ff 387 # This flag is only useful for Objective-C code. When set to YES local
rgrover1 980:07ce7d9ed5ff 388 # methods, which are defined in the implementation section but not in
rgrover1 980:07ce7d9ed5ff 389 # the interface are included in the documentation.
rgrover1 980:07ce7d9ed5ff 390 # If set to NO (the default) only methods in the interface are included.
rgrover1 980:07ce7d9ed5ff 391
rgrover1 980:07ce7d9ed5ff 392 EXTRACT_LOCAL_METHODS = YES
rgrover1 980:07ce7d9ed5ff 393
rgrover1 980:07ce7d9ed5ff 394 # If this flag is set to YES, the members of anonymous namespaces will be
rgrover1 980:07ce7d9ed5ff 395 # extracted and appear in the documentation as a namespace called
rgrover1 980:07ce7d9ed5ff 396 # 'anonymous_namespace{file}', where file will be replaced with the base
rgrover1 980:07ce7d9ed5ff 397 # name of the file that contains the anonymous namespace. By default
rgrover1 980:07ce7d9ed5ff 398 # anonymous namespaces are hidden.
rgrover1 980:07ce7d9ed5ff 399
rgrover1 980:07ce7d9ed5ff 400 EXTRACT_ANON_NSPACES = YES
rgrover1 980:07ce7d9ed5ff 401
rgrover1 980:07ce7d9ed5ff 402 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
rgrover1 980:07ce7d9ed5ff 403 # undocumented members of documented classes, files or namespaces.
rgrover1 980:07ce7d9ed5ff 404 # If set to NO (the default) these members will be included in the
rgrover1 980:07ce7d9ed5ff 405 # various overviews, but no documentation section is generated.
rgrover1 980:07ce7d9ed5ff 406 # This option has no effect if EXTRACT_ALL is enabled.
rgrover1 980:07ce7d9ed5ff 407
rgrover1 980:07ce7d9ed5ff 408 HIDE_UNDOC_MEMBERS = NO
rgrover1 980:07ce7d9ed5ff 409
rgrover1 980:07ce7d9ed5ff 410 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
rgrover1 980:07ce7d9ed5ff 411 # undocumented classes that are normally visible in the class hierarchy.
rgrover1 980:07ce7d9ed5ff 412 # If set to NO (the default) these classes will be included in the various
rgrover1 980:07ce7d9ed5ff 413 # overviews. This option has no effect if EXTRACT_ALL is enabled.
rgrover1 980:07ce7d9ed5ff 414
rgrover1 980:07ce7d9ed5ff 415 HIDE_UNDOC_CLASSES = NO
rgrover1 980:07ce7d9ed5ff 416
rgrover1 980:07ce7d9ed5ff 417 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
rgrover1 980:07ce7d9ed5ff 418 # friend (class|struct|union) declarations.
rgrover1 980:07ce7d9ed5ff 419 # If set to NO (the default) these declarations will be included in the
rgrover1 980:07ce7d9ed5ff 420 # documentation.
rgrover1 980:07ce7d9ed5ff 421
rgrover1 980:07ce7d9ed5ff 422 HIDE_FRIEND_COMPOUNDS = NO
rgrover1 980:07ce7d9ed5ff 423
rgrover1 980:07ce7d9ed5ff 424 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
rgrover1 980:07ce7d9ed5ff 425 # documentation blocks found inside the body of a function.
rgrover1 980:07ce7d9ed5ff 426 # If set to NO (the default) these blocks will be appended to the
rgrover1 980:07ce7d9ed5ff 427 # function's detailed documentation block.
rgrover1 980:07ce7d9ed5ff 428
rgrover1 980:07ce7d9ed5ff 429 HIDE_IN_BODY_DOCS = NO
rgrover1 980:07ce7d9ed5ff 430
rgrover1 980:07ce7d9ed5ff 431 # The INTERNAL_DOCS tag determines if documentation
rgrover1 980:07ce7d9ed5ff 432 # that is typed after a \internal command is included. If the tag is set
rgrover1 980:07ce7d9ed5ff 433 # to NO (the default) then the documentation will be excluded.
rgrover1 980:07ce7d9ed5ff 434 # Set it to YES to include the internal documentation.
rgrover1 980:07ce7d9ed5ff 435
rgrover1 980:07ce7d9ed5ff 436 INTERNAL_DOCS = NO
rgrover1 980:07ce7d9ed5ff 437
rgrover1 980:07ce7d9ed5ff 438 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
rgrover1 980:07ce7d9ed5ff 439 # file names in lower-case letters. If set to YES upper-case letters are also
rgrover1 980:07ce7d9ed5ff 440 # allowed. This is useful if you have classes or files whose names only differ
rgrover1 980:07ce7d9ed5ff 441 # in case and if your file system supports case sensitive file names. Windows
rgrover1 980:07ce7d9ed5ff 442 # and Mac users are advised to set this option to NO.
rgrover1 980:07ce7d9ed5ff 443
rgrover1 980:07ce7d9ed5ff 444 CASE_SENSE_NAMES = NO
rgrover1 980:07ce7d9ed5ff 445
rgrover1 980:07ce7d9ed5ff 446 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
rgrover1 980:07ce7d9ed5ff 447 # will show members with their full class and namespace scopes in the
rgrover1 980:07ce7d9ed5ff 448 # documentation. If set to YES the scope will be hidden.
rgrover1 980:07ce7d9ed5ff 449
rgrover1 980:07ce7d9ed5ff 450 HIDE_SCOPE_NAMES = NO
rgrover1 980:07ce7d9ed5ff 451
rgrover1 980:07ce7d9ed5ff 452 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
rgrover1 980:07ce7d9ed5ff 453 # will put a list of the files that are included by a file in the documentation
rgrover1 980:07ce7d9ed5ff 454 # of that file.
rgrover1 980:07ce7d9ed5ff 455
rgrover1 980:07ce7d9ed5ff 456 SHOW_INCLUDE_FILES = YES
rgrover1 980:07ce7d9ed5ff 457
rgrover1 980:07ce7d9ed5ff 458 # If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
rgrover1 980:07ce7d9ed5ff 459 # will list include files with double quotes in the documentation
rgrover1 980:07ce7d9ed5ff 460 # rather than with sharp brackets.
rgrover1 980:07ce7d9ed5ff 461
rgrover1 980:07ce7d9ed5ff 462 FORCE_LOCAL_INCLUDES = NO
rgrover1 980:07ce7d9ed5ff 463
rgrover1 980:07ce7d9ed5ff 464 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
rgrover1 980:07ce7d9ed5ff 465 # is inserted in the documentation for inline members.
rgrover1 980:07ce7d9ed5ff 466
rgrover1 980:07ce7d9ed5ff 467 INLINE_INFO = YES
rgrover1 980:07ce7d9ed5ff 468
rgrover1 980:07ce7d9ed5ff 469 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
rgrover1 980:07ce7d9ed5ff 470 # will sort the (detailed) documentation of file and class members
rgrover1 980:07ce7d9ed5ff 471 # alphabetically by member name. If set to NO the members will appear in
rgrover1 980:07ce7d9ed5ff 472 # declaration order.
rgrover1 980:07ce7d9ed5ff 473
rgrover1 980:07ce7d9ed5ff 474 SORT_MEMBER_DOCS = YES
rgrover1 980:07ce7d9ed5ff 475
rgrover1 980:07ce7d9ed5ff 476 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
rgrover1 980:07ce7d9ed5ff 477 # brief documentation of file, namespace and class members alphabetically
rgrover1 980:07ce7d9ed5ff 478 # by member name. If set to NO (the default) the members will appear in
rgrover1 980:07ce7d9ed5ff 479 # declaration order.
rgrover1 980:07ce7d9ed5ff 480
rgrover1 980:07ce7d9ed5ff 481 SORT_BRIEF_DOCS = NO
rgrover1 980:07ce7d9ed5ff 482
rgrover1 980:07ce7d9ed5ff 483 # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
rgrover1 980:07ce7d9ed5ff 484 # will sort the (brief and detailed) documentation of class members so that
rgrover1 980:07ce7d9ed5ff 485 # constructors and destructors are listed first. If set to NO (the default)
rgrover1 980:07ce7d9ed5ff 486 # the constructors will appear in the respective orders defined by
rgrover1 980:07ce7d9ed5ff 487 # SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
rgrover1 980:07ce7d9ed5ff 488 # This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
rgrover1 980:07ce7d9ed5ff 489 # and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
rgrover1 980:07ce7d9ed5ff 490
rgrover1 980:07ce7d9ed5ff 491 SORT_MEMBERS_CTORS_1ST = NO
rgrover1 980:07ce7d9ed5ff 492
rgrover1 980:07ce7d9ed5ff 493 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
rgrover1 980:07ce7d9ed5ff 494 # hierarchy of group names into alphabetical order. If set to NO (the default)
rgrover1 980:07ce7d9ed5ff 495 # the group names will appear in their defined order.
rgrover1 980:07ce7d9ed5ff 496
rgrover1 980:07ce7d9ed5ff 497 SORT_GROUP_NAMES = NO
rgrover1 980:07ce7d9ed5ff 498
rgrover1 980:07ce7d9ed5ff 499 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
rgrover1 980:07ce7d9ed5ff 500 # sorted by fully-qualified names, including namespaces. If set to
rgrover1 980:07ce7d9ed5ff 501 # NO (the default), the class list will be sorted only by class name,
rgrover1 980:07ce7d9ed5ff 502 # not including the namespace part.
rgrover1 980:07ce7d9ed5ff 503 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
rgrover1 980:07ce7d9ed5ff 504 # Note: This option applies only to the class list, not to the
rgrover1 980:07ce7d9ed5ff 505 # alphabetical list.
rgrover1 980:07ce7d9ed5ff 506
rgrover1 980:07ce7d9ed5ff 507 SORT_BY_SCOPE_NAME = NO
rgrover1 980:07ce7d9ed5ff 508
rgrover1 980:07ce7d9ed5ff 509 # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
rgrover1 980:07ce7d9ed5ff 510 # do proper type resolution of all parameters of a function it will reject a
rgrover1 980:07ce7d9ed5ff 511 # match between the prototype and the implementation of a member function even
rgrover1 980:07ce7d9ed5ff 512 # if there is only one candidate or it is obvious which candidate to choose
rgrover1 980:07ce7d9ed5ff 513 # by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
rgrover1 980:07ce7d9ed5ff 514 # will still accept a match between prototype and implementation in such cases.
rgrover1 980:07ce7d9ed5ff 515
rgrover1 980:07ce7d9ed5ff 516 STRICT_PROTO_MATCHING = NO
rgrover1 980:07ce7d9ed5ff 517
rgrover1 980:07ce7d9ed5ff 518 # The GENERATE_TODOLIST tag can be used to enable (YES) or
rgrover1 980:07ce7d9ed5ff 519 # disable (NO) the todo list. This list is created by putting \todo
rgrover1 980:07ce7d9ed5ff 520 # commands in the documentation.
rgrover1 980:07ce7d9ed5ff 521
rgrover1 980:07ce7d9ed5ff 522 GENERATE_TODOLIST = YES
rgrover1 980:07ce7d9ed5ff 523
rgrover1 980:07ce7d9ed5ff 524 # The GENERATE_TESTLIST tag can be used to enable (YES) or
rgrover1 980:07ce7d9ed5ff 525 # disable (NO) the test list. This list is created by putting \test
rgrover1 980:07ce7d9ed5ff 526 # commands in the documentation.
rgrover1 980:07ce7d9ed5ff 527
rgrover1 980:07ce7d9ed5ff 528 GENERATE_TESTLIST = YES
rgrover1 980:07ce7d9ed5ff 529
rgrover1 980:07ce7d9ed5ff 530 # The GENERATE_BUGLIST tag can be used to enable (YES) or
rgrover1 980:07ce7d9ed5ff 531 # disable (NO) the bug list. This list is created by putting \bug
rgrover1 980:07ce7d9ed5ff 532 # commands in the documentation.
rgrover1 980:07ce7d9ed5ff 533
rgrover1 980:07ce7d9ed5ff 534 GENERATE_BUGLIST = YES
rgrover1 980:07ce7d9ed5ff 535
rgrover1 980:07ce7d9ed5ff 536 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
rgrover1 980:07ce7d9ed5ff 537 # disable (NO) the deprecated list. This list is created by putting
rgrover1 980:07ce7d9ed5ff 538 # \deprecated commands in the documentation.
rgrover1 980:07ce7d9ed5ff 539
rgrover1 980:07ce7d9ed5ff 540 GENERATE_DEPRECATEDLIST= YES
rgrover1 980:07ce7d9ed5ff 541
rgrover1 980:07ce7d9ed5ff 542 # The ENABLED_SECTIONS tag can be used to enable conditional
rgrover1 980:07ce7d9ed5ff 543 # documentation sections, marked by \if section-label ... \endif
rgrover1 980:07ce7d9ed5ff 544 # and \cond section-label ... \endcond blocks.
rgrover1 980:07ce7d9ed5ff 545
rgrover1 980:07ce7d9ed5ff 546 ENABLED_SECTIONS =
rgrover1 980:07ce7d9ed5ff 547
rgrover1 980:07ce7d9ed5ff 548 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
rgrover1 980:07ce7d9ed5ff 549 # the initial value of a variable or macro consists of for it to appear in
rgrover1 980:07ce7d9ed5ff 550 # the documentation. If the initializer consists of more lines than specified
rgrover1 980:07ce7d9ed5ff 551 # here it will be hidden. Use a value of 0 to hide initializers completely.
rgrover1 980:07ce7d9ed5ff 552 # The appearance of the initializer of individual variables and macros in the
rgrover1 980:07ce7d9ed5ff 553 # documentation can be controlled using \showinitializer or \hideinitializer
rgrover1 980:07ce7d9ed5ff 554 # command in the documentation regardless of this setting.
rgrover1 980:07ce7d9ed5ff 555
rgrover1 980:07ce7d9ed5ff 556 MAX_INITIALIZER_LINES = 30
rgrover1 980:07ce7d9ed5ff 557
rgrover1 980:07ce7d9ed5ff 558 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
rgrover1 980:07ce7d9ed5ff 559 # at the bottom of the documentation of classes and structs. If set to YES the
rgrover1 980:07ce7d9ed5ff 560 # list will mention the files that were used to generate the documentation.
rgrover1 980:07ce7d9ed5ff 561
rgrover1 980:07ce7d9ed5ff 562 SHOW_USED_FILES = YES
rgrover1 980:07ce7d9ed5ff 563
rgrover1 980:07ce7d9ed5ff 564 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
rgrover1 980:07ce7d9ed5ff 565 # This will remove the Files entry from the Quick Index and from the
rgrover1 980:07ce7d9ed5ff 566 # Folder Tree View (if specified). The default is YES.
rgrover1 980:07ce7d9ed5ff 567
rgrover1 980:07ce7d9ed5ff 568 SHOW_FILES = YES
rgrover1 980:07ce7d9ed5ff 569
rgrover1 980:07ce7d9ed5ff 570 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the
rgrover1 980:07ce7d9ed5ff 571 # Namespaces page.
rgrover1 980:07ce7d9ed5ff 572 # This will remove the Namespaces entry from the Quick Index
rgrover1 980:07ce7d9ed5ff 573 # and from the Folder Tree View (if specified). The default is YES.
rgrover1 980:07ce7d9ed5ff 574
rgrover1 980:07ce7d9ed5ff 575 SHOW_NAMESPACES = YES
rgrover1 980:07ce7d9ed5ff 576
rgrover1 980:07ce7d9ed5ff 577 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
rgrover1 980:07ce7d9ed5ff 578 # doxygen should invoke to get the current version for each file (typically from
rgrover1 980:07ce7d9ed5ff 579 # the version control system). Doxygen will invoke the program by executing (via
rgrover1 980:07ce7d9ed5ff 580 # popen()) the command <command> <input-file>, where <command> is the value of
rgrover1 980:07ce7d9ed5ff 581 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
rgrover1 980:07ce7d9ed5ff 582 # provided by doxygen. Whatever the program writes to standard output
rgrover1 980:07ce7d9ed5ff 583 # is used as the file version. See the manual for examples.
rgrover1 980:07ce7d9ed5ff 584
rgrover1 980:07ce7d9ed5ff 585 FILE_VERSION_FILTER =
rgrover1 980:07ce7d9ed5ff 586
rgrover1 980:07ce7d9ed5ff 587 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
rgrover1 980:07ce7d9ed5ff 588 # by doxygen. The layout file controls the global structure of the generated
rgrover1 980:07ce7d9ed5ff 589 # output files in an output format independent way. To create the layout file
rgrover1 980:07ce7d9ed5ff 590 # that represents doxygen's defaults, run doxygen with the -l option.
rgrover1 980:07ce7d9ed5ff 591 # You can optionally specify a file name after the option, if omitted
rgrover1 980:07ce7d9ed5ff 592 # DoxygenLayout.xml will be used as the name of the layout file.
rgrover1 980:07ce7d9ed5ff 593
rgrover1 980:07ce7d9ed5ff 594 LAYOUT_FILE =
rgrover1 980:07ce7d9ed5ff 595
rgrover1 980:07ce7d9ed5ff 596 # The CITE_BIB_FILES tag can be used to specify one or more bib files
rgrover1 980:07ce7d9ed5ff 597 # containing the references data. This must be a list of .bib files. The
rgrover1 980:07ce7d9ed5ff 598 # .bib extension is automatically appended if omitted. Using this command
rgrover1 980:07ce7d9ed5ff 599 # requires the bibtex tool to be installed. See also
rgrover1 980:07ce7d9ed5ff 600 # http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
rgrover1 980:07ce7d9ed5ff 601 # of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
rgrover1 980:07ce7d9ed5ff 602 # feature you need bibtex and perl available in the search path. Do not use
rgrover1 980:07ce7d9ed5ff 603 # file names with spaces, bibtex cannot handle them.
rgrover1 980:07ce7d9ed5ff 604
rgrover1 980:07ce7d9ed5ff 605 CITE_BIB_FILES =
rgrover1 980:07ce7d9ed5ff 606
rgrover1 980:07ce7d9ed5ff 607 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 608 # configuration options related to warning and progress messages
rgrover1 980:07ce7d9ed5ff 609 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 610
rgrover1 980:07ce7d9ed5ff 611 # The QUIET tag can be used to turn on/off the messages that are generated
rgrover1 980:07ce7d9ed5ff 612 # by doxygen. Possible values are YES and NO. If left blank NO is used.
rgrover1 980:07ce7d9ed5ff 613
rgrover1 980:07ce7d9ed5ff 614 QUIET = NO
rgrover1 980:07ce7d9ed5ff 615
rgrover1 980:07ce7d9ed5ff 616 # The WARNINGS tag can be used to turn on/off the warning messages that are
rgrover1 980:07ce7d9ed5ff 617 # generated by doxygen. Possible values are YES and NO. If left blank
rgrover1 980:07ce7d9ed5ff 618 # NO is used.
rgrover1 980:07ce7d9ed5ff 619
rgrover1 980:07ce7d9ed5ff 620 WARNINGS = YES
rgrover1 980:07ce7d9ed5ff 621
rgrover1 980:07ce7d9ed5ff 622 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
rgrover1 980:07ce7d9ed5ff 623 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
rgrover1 980:07ce7d9ed5ff 624 # automatically be disabled.
rgrover1 980:07ce7d9ed5ff 625
rgrover1 980:07ce7d9ed5ff 626 WARN_IF_UNDOCUMENTED = YES
rgrover1 980:07ce7d9ed5ff 627
rgrover1 980:07ce7d9ed5ff 628 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
rgrover1 980:07ce7d9ed5ff 629 # potential errors in the documentation, such as not documenting some
rgrover1 980:07ce7d9ed5ff 630 # parameters in a documented function, or documenting parameters that
rgrover1 980:07ce7d9ed5ff 631 # don't exist or using markup commands wrongly.
rgrover1 980:07ce7d9ed5ff 632
rgrover1 980:07ce7d9ed5ff 633 WARN_IF_DOC_ERROR = YES
rgrover1 980:07ce7d9ed5ff 634
rgrover1 980:07ce7d9ed5ff 635 # The WARN_NO_PARAMDOC option can be enabled to get warnings for
rgrover1 980:07ce7d9ed5ff 636 # functions that are documented, but have no documentation for their parameters
rgrover1 980:07ce7d9ed5ff 637 # or return value. If set to NO (the default) doxygen will only warn about
rgrover1 980:07ce7d9ed5ff 638 # wrong or incomplete parameter documentation, but not about the absence of
rgrover1 980:07ce7d9ed5ff 639 # documentation.
rgrover1 980:07ce7d9ed5ff 640
rgrover1 980:07ce7d9ed5ff 641 WARN_NO_PARAMDOC = NO
rgrover1 980:07ce7d9ed5ff 642
rgrover1 980:07ce7d9ed5ff 643 # The WARN_FORMAT tag determines the format of the warning messages that
rgrover1 980:07ce7d9ed5ff 644 # doxygen can produce. The string should contain the $file, $line, and $text
rgrover1 980:07ce7d9ed5ff 645 # tags, which will be replaced by the file and line number from which the
rgrover1 980:07ce7d9ed5ff 646 # warning originated and the warning text. Optionally the format may contain
rgrover1 980:07ce7d9ed5ff 647 # $version, which will be replaced by the version of the file (if it could
rgrover1 980:07ce7d9ed5ff 648 # be obtained via FILE_VERSION_FILTER)
rgrover1 980:07ce7d9ed5ff 649
rgrover1 980:07ce7d9ed5ff 650 WARN_FORMAT = "$file:$line: $text"
rgrover1 980:07ce7d9ed5ff 651
rgrover1 980:07ce7d9ed5ff 652 # The WARN_LOGFILE tag can be used to specify a file to which warning
rgrover1 980:07ce7d9ed5ff 653 # and error messages should be written. If left blank the output is written
rgrover1 980:07ce7d9ed5ff 654 # to stderr.
rgrover1 980:07ce7d9ed5ff 655
rgrover1 980:07ce7d9ed5ff 656 WARN_LOGFILE =
rgrover1 980:07ce7d9ed5ff 657
rgrover1 980:07ce7d9ed5ff 658 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 659 # configuration options related to the input files
rgrover1 980:07ce7d9ed5ff 660 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 661
rgrover1 980:07ce7d9ed5ff 662 # The INPUT tag can be used to specify the files and/or directories that contain
rgrover1 980:07ce7d9ed5ff 663 # documented source files. You may enter file names like "myfile.cpp" or
rgrover1 980:07ce7d9ed5ff 664 # directories like "/usr/src/myproject". Separate the files or directories
rgrover1 980:07ce7d9ed5ff 665 # with spaces.
rgrover1 980:07ce7d9ed5ff 666
rgrover1 980:07ce7d9ed5ff 667 INPUT =
rgrover1 980:07ce7d9ed5ff 668
rgrover1 980:07ce7d9ed5ff 669 # This tag can be used to specify the character encoding of the source files
rgrover1 980:07ce7d9ed5ff 670 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
rgrover1 980:07ce7d9ed5ff 671 # also the default input encoding. Doxygen uses libiconv (or the iconv built
rgrover1 980:07ce7d9ed5ff 672 # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
rgrover1 980:07ce7d9ed5ff 673 # the list of possible encodings.
rgrover1 980:07ce7d9ed5ff 674
rgrover1 980:07ce7d9ed5ff 675 INPUT_ENCODING = UTF-8
rgrover1 980:07ce7d9ed5ff 676
rgrover1 980:07ce7d9ed5ff 677 # If the value of the INPUT tag contains directories, you can use the
rgrover1 980:07ce7d9ed5ff 678 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
rgrover1 980:07ce7d9ed5ff 679 # and *.h) to filter out the source-files in the directories. If left
rgrover1 980:07ce7d9ed5ff 680 # blank the following patterns are tested:
rgrover1 980:07ce7d9ed5ff 681 # *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
rgrover1 980:07ce7d9ed5ff 682 # *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
rgrover1 980:07ce7d9ed5ff 683 # *.f90 *.f *.for *.vhd *.vhdl
rgrover1 980:07ce7d9ed5ff 684
rgrover1 980:07ce7d9ed5ff 685 FILE_PATTERNS = *.h *.cpp *.md
rgrover1 980:07ce7d9ed5ff 686
rgrover1 980:07ce7d9ed5ff 687 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
rgrover1 980:07ce7d9ed5ff 688 # should be searched for input files as well. Possible values are YES and NO.
rgrover1 980:07ce7d9ed5ff 689 # If left blank NO is used.
rgrover1 980:07ce7d9ed5ff 690
rgrover1 980:07ce7d9ed5ff 691 RECURSIVE = YES
rgrover1 980:07ce7d9ed5ff 692
rgrover1 980:07ce7d9ed5ff 693 # The EXCLUDE tag can be used to specify files and/or directories that should be
rgrover1 980:07ce7d9ed5ff 694 # excluded from the INPUT source files. This way you can easily exclude a
rgrover1 980:07ce7d9ed5ff 695 # subdirectory from a directory tree whose root is specified with the INPUT tag.
rgrover1 980:07ce7d9ed5ff 696 # Note that relative paths are relative to the directory from which doxygen is
rgrover1 980:07ce7d9ed5ff 697 # run.
rgrover1 980:07ce7d9ed5ff 698
rgrover1 980:07ce7d9ed5ff 699 EXCLUDE = configs
rgrover1 980:07ce7d9ed5ff 700
rgrover1 980:07ce7d9ed5ff 701 # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
rgrover1 980:07ce7d9ed5ff 702 # directories that are symbolic links (a Unix file system feature) are excluded
rgrover1 980:07ce7d9ed5ff 703 # from the input.
rgrover1 980:07ce7d9ed5ff 704
rgrover1 980:07ce7d9ed5ff 705 EXCLUDE_SYMLINKS = NO
rgrover1 980:07ce7d9ed5ff 706
rgrover1 980:07ce7d9ed5ff 707 # If the value of the INPUT tag contains directories, you can use the
rgrover1 980:07ce7d9ed5ff 708 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
rgrover1 980:07ce7d9ed5ff 709 # certain files from those directories. Note that the wildcards are matched
rgrover1 980:07ce7d9ed5ff 710 # against the file with absolute path, so to exclude all test directories
rgrover1 980:07ce7d9ed5ff 711 # for example use the pattern */test/*
rgrover1 980:07ce7d9ed5ff 712
rgrover1 980:07ce7d9ed5ff 713 EXCLUDE_PATTERNS =
rgrover1 980:07ce7d9ed5ff 714
rgrover1 980:07ce7d9ed5ff 715 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
rgrover1 980:07ce7d9ed5ff 716 # (namespaces, classes, functions, etc.) that should be excluded from the
rgrover1 980:07ce7d9ed5ff 717 # output. The symbol name can be a fully qualified name, a word, or if the
rgrover1 980:07ce7d9ed5ff 718 # wildcard * is used, a substring. Examples: ANamespace, AClass,
rgrover1 980:07ce7d9ed5ff 719 # AClass::ANamespace, ANamespace::*Test
rgrover1 980:07ce7d9ed5ff 720
rgrover1 980:07ce7d9ed5ff 721 EXCLUDE_SYMBOLS =
rgrover1 980:07ce7d9ed5ff 722
rgrover1 980:07ce7d9ed5ff 723 # The EXAMPLE_PATH tag can be used to specify one or more files or
rgrover1 980:07ce7d9ed5ff 724 # directories that contain example code fragments that are included (see
rgrover1 980:07ce7d9ed5ff 725 # the \include command).
rgrover1 980:07ce7d9ed5ff 726
rgrover1 980:07ce7d9ed5ff 727 EXAMPLE_PATH =
rgrover1 980:07ce7d9ed5ff 728
rgrover1 980:07ce7d9ed5ff 729 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
rgrover1 980:07ce7d9ed5ff 730 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
rgrover1 980:07ce7d9ed5ff 731 # and *.h) to filter out the source-files in the directories. If left
rgrover1 980:07ce7d9ed5ff 732 # blank all files are included.
rgrover1 980:07ce7d9ed5ff 733
rgrover1 980:07ce7d9ed5ff 734 EXAMPLE_PATTERNS = *
rgrover1 980:07ce7d9ed5ff 735
rgrover1 980:07ce7d9ed5ff 736 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
rgrover1 980:07ce7d9ed5ff 737 # searched for input files to be used with the \include or \dontinclude
rgrover1 980:07ce7d9ed5ff 738 # commands irrespective of the value of the RECURSIVE tag.
rgrover1 980:07ce7d9ed5ff 739 # Possible values are YES and NO. If left blank NO is used.
rgrover1 980:07ce7d9ed5ff 740
rgrover1 980:07ce7d9ed5ff 741 EXAMPLE_RECURSIVE = NO
rgrover1 980:07ce7d9ed5ff 742
rgrover1 980:07ce7d9ed5ff 743 # The IMAGE_PATH tag can be used to specify one or more files or
rgrover1 980:07ce7d9ed5ff 744 # directories that contain image that are included in the documentation (see
rgrover1 980:07ce7d9ed5ff 745 # the \image command).
rgrover1 980:07ce7d9ed5ff 746
rgrover1 980:07ce7d9ed5ff 747 IMAGE_PATH =
rgrover1 980:07ce7d9ed5ff 748
rgrover1 980:07ce7d9ed5ff 749 # The INPUT_FILTER tag can be used to specify a program that doxygen should
rgrover1 980:07ce7d9ed5ff 750 # invoke to filter for each input file. Doxygen will invoke the filter program
rgrover1 980:07ce7d9ed5ff 751 # by executing (via popen()) the command <filter> <input-file>, where <filter>
rgrover1 980:07ce7d9ed5ff 752 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
rgrover1 980:07ce7d9ed5ff 753 # input file. Doxygen will then use the output that the filter program writes
rgrover1 980:07ce7d9ed5ff 754 # to standard output.
rgrover1 980:07ce7d9ed5ff 755 # If FILTER_PATTERNS is specified, this tag will be ignored.
rgrover1 980:07ce7d9ed5ff 756 # Note that the filter must not add or remove lines; it is applied before the
rgrover1 980:07ce7d9ed5ff 757 # code is scanned, but not when the output code is generated. If lines are added
rgrover1 980:07ce7d9ed5ff 758 # or removed, the anchors will not be placed correctly.
rgrover1 980:07ce7d9ed5ff 759
rgrover1 980:07ce7d9ed5ff 760 INPUT_FILTER =
rgrover1 980:07ce7d9ed5ff 761
rgrover1 980:07ce7d9ed5ff 762 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
rgrover1 980:07ce7d9ed5ff 763 # basis.
rgrover1 980:07ce7d9ed5ff 764 # Doxygen will compare the file name with each pattern and apply the
rgrover1 980:07ce7d9ed5ff 765 # filter if there is a match.
rgrover1 980:07ce7d9ed5ff 766 # The filters are a list of the form:
rgrover1 980:07ce7d9ed5ff 767 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
rgrover1 980:07ce7d9ed5ff 768 # info on how filters are used. If FILTER_PATTERNS is empty or if
rgrover1 980:07ce7d9ed5ff 769 # non of the patterns match the file name, INPUT_FILTER is applied.
rgrover1 980:07ce7d9ed5ff 770
rgrover1 980:07ce7d9ed5ff 771 FILTER_PATTERNS =
rgrover1 980:07ce7d9ed5ff 772
rgrover1 980:07ce7d9ed5ff 773 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
rgrover1 980:07ce7d9ed5ff 774 # INPUT_FILTER) will be used to filter the input files when producing source
rgrover1 980:07ce7d9ed5ff 775 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
rgrover1 980:07ce7d9ed5ff 776
rgrover1 980:07ce7d9ed5ff 777 FILTER_SOURCE_FILES = NO
rgrover1 980:07ce7d9ed5ff 778
rgrover1 980:07ce7d9ed5ff 779 # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
rgrover1 980:07ce7d9ed5ff 780 # pattern. A pattern will override the setting for FILTER_PATTERN (if any)
rgrover1 980:07ce7d9ed5ff 781 # and it is also possible to disable source filtering for a specific pattern
rgrover1 980:07ce7d9ed5ff 782 # using *.ext= (so without naming a filter). This option only has effect when
rgrover1 980:07ce7d9ed5ff 783 # FILTER_SOURCE_FILES is enabled.
rgrover1 980:07ce7d9ed5ff 784
rgrover1 980:07ce7d9ed5ff 785 FILTER_SOURCE_PATTERNS =
rgrover1 980:07ce7d9ed5ff 786
rgrover1 980:07ce7d9ed5ff 787 # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that
rgrover1 980:07ce7d9ed5ff 788 # is part of the input, its contents will be placed on the main page
rgrover1 980:07ce7d9ed5ff 789 # (index.html). This can be useful if you have a project on for instance GitHub
rgrover1 980:07ce7d9ed5ff 790 # and want reuse the introduction page also for the doxygen output.
rgrover1 980:07ce7d9ed5ff 791
rgrover1 980:07ce7d9ed5ff 792 USE_MDFILE_AS_MAINPAGE = DOXYGEN_FRONTPAGE.md
rgrover1 980:07ce7d9ed5ff 793
rgrover1 980:07ce7d9ed5ff 794 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 795 # configuration options related to source browsing
rgrover1 980:07ce7d9ed5ff 796 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 797
rgrover1 980:07ce7d9ed5ff 798 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
rgrover1 980:07ce7d9ed5ff 799 # be generated. Documented entities will be cross-referenced with these sources.
rgrover1 980:07ce7d9ed5ff 800 # Note: To get rid of all source code in the generated output, make sure also
rgrover1 980:07ce7d9ed5ff 801 # VERBATIM_HEADERS is set to NO.
rgrover1 980:07ce7d9ed5ff 802
rgrover1 980:07ce7d9ed5ff 803 SOURCE_BROWSER = YES
rgrover1 980:07ce7d9ed5ff 804
rgrover1 980:07ce7d9ed5ff 805 # Setting the INLINE_SOURCES tag to YES will include the body
rgrover1 980:07ce7d9ed5ff 806 # of functions and classes directly in the documentation.
rgrover1 980:07ce7d9ed5ff 807
rgrover1 980:07ce7d9ed5ff 808 INLINE_SOURCES = NO
rgrover1 980:07ce7d9ed5ff 809
rgrover1 980:07ce7d9ed5ff 810 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
rgrover1 980:07ce7d9ed5ff 811 # doxygen to hide any special comment blocks from generated source code
rgrover1 980:07ce7d9ed5ff 812 # fragments. Normal C, C++ and Fortran comments will always remain visible.
rgrover1 980:07ce7d9ed5ff 813
rgrover1 980:07ce7d9ed5ff 814 STRIP_CODE_COMMENTS = YES
rgrover1 980:07ce7d9ed5ff 815
rgrover1 980:07ce7d9ed5ff 816 # If the REFERENCED_BY_RELATION tag is set to YES
rgrover1 980:07ce7d9ed5ff 817 # then for each documented function all documented
rgrover1 980:07ce7d9ed5ff 818 # functions referencing it will be listed.
rgrover1 980:07ce7d9ed5ff 819
rgrover1 980:07ce7d9ed5ff 820 REFERENCED_BY_RELATION = YES
rgrover1 980:07ce7d9ed5ff 821
rgrover1 980:07ce7d9ed5ff 822 # If the REFERENCES_RELATION tag is set to YES
rgrover1 980:07ce7d9ed5ff 823 # then for each documented function all documented entities
rgrover1 980:07ce7d9ed5ff 824 # called/used by that function will be listed.
rgrover1 980:07ce7d9ed5ff 825
rgrover1 980:07ce7d9ed5ff 826 REFERENCES_RELATION = YES
rgrover1 980:07ce7d9ed5ff 827
rgrover1 980:07ce7d9ed5ff 828 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
rgrover1 980:07ce7d9ed5ff 829 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
rgrover1 980:07ce7d9ed5ff 830 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
rgrover1 980:07ce7d9ed5ff 831 # link to the source code.
rgrover1 980:07ce7d9ed5ff 832 # Otherwise they will link to the documentation.
rgrover1 980:07ce7d9ed5ff 833
rgrover1 980:07ce7d9ed5ff 834 REFERENCES_LINK_SOURCE = YES
rgrover1 980:07ce7d9ed5ff 835
rgrover1 980:07ce7d9ed5ff 836 # If the USE_HTAGS tag is set to YES then the references to source code
rgrover1 980:07ce7d9ed5ff 837 # will point to the HTML generated by the htags(1) tool instead of doxygen
rgrover1 980:07ce7d9ed5ff 838 # built-in source browser. The htags tool is part of GNU's global source
rgrover1 980:07ce7d9ed5ff 839 # tagging system (see http://www.gnu.org/software/global/global.html). You
rgrover1 980:07ce7d9ed5ff 840 # will need version 4.8.6 or higher.
rgrover1 980:07ce7d9ed5ff 841
rgrover1 980:07ce7d9ed5ff 842 USE_HTAGS = NO
rgrover1 980:07ce7d9ed5ff 843
rgrover1 980:07ce7d9ed5ff 844 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
rgrover1 980:07ce7d9ed5ff 845 # will generate a verbatim copy of the header file for each class for
rgrover1 980:07ce7d9ed5ff 846 # which an include is specified. Set to NO to disable this.
rgrover1 980:07ce7d9ed5ff 847
rgrover1 980:07ce7d9ed5ff 848 VERBATIM_HEADERS = YES
rgrover1 980:07ce7d9ed5ff 849
rgrover1 980:07ce7d9ed5ff 850 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 851 # configuration options related to the alphabetical class index
rgrover1 980:07ce7d9ed5ff 852 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 853
rgrover1 980:07ce7d9ed5ff 854 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
rgrover1 980:07ce7d9ed5ff 855 # of all compounds will be generated. Enable this if the project
rgrover1 980:07ce7d9ed5ff 856 # contains a lot of classes, structs, unions or interfaces.
rgrover1 980:07ce7d9ed5ff 857
rgrover1 980:07ce7d9ed5ff 858 ALPHABETICAL_INDEX = NO
rgrover1 980:07ce7d9ed5ff 859
rgrover1 980:07ce7d9ed5ff 860 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
rgrover1 980:07ce7d9ed5ff 861 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
rgrover1 980:07ce7d9ed5ff 862 # in which this list will be split (can be a number in the range [1..20])
rgrover1 980:07ce7d9ed5ff 863
rgrover1 980:07ce7d9ed5ff 864 COLS_IN_ALPHA_INDEX = 5
rgrover1 980:07ce7d9ed5ff 865
rgrover1 980:07ce7d9ed5ff 866 # In case all classes in a project start with a common prefix, all
rgrover1 980:07ce7d9ed5ff 867 # classes will be put under the same header in the alphabetical index.
rgrover1 980:07ce7d9ed5ff 868 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
rgrover1 980:07ce7d9ed5ff 869 # should be ignored while generating the index headers.
rgrover1 980:07ce7d9ed5ff 870
rgrover1 980:07ce7d9ed5ff 871 IGNORE_PREFIX =
rgrover1 980:07ce7d9ed5ff 872
rgrover1 980:07ce7d9ed5ff 873 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 874 # configuration options related to the HTML output
rgrover1 980:07ce7d9ed5ff 875 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 876
rgrover1 980:07ce7d9ed5ff 877 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 878 # generate HTML output.
rgrover1 980:07ce7d9ed5ff 879
rgrover1 980:07ce7d9ed5ff 880 GENERATE_HTML = YES
rgrover1 980:07ce7d9ed5ff 881
rgrover1 980:07ce7d9ed5ff 882 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
rgrover1 980:07ce7d9ed5ff 883 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
rgrover1 980:07ce7d9ed5ff 884 # put in front of it. If left blank `html' will be used as the default path.
rgrover1 980:07ce7d9ed5ff 885
rgrover1 980:07ce7d9ed5ff 886 HTML_OUTPUT = .
rgrover1 980:07ce7d9ed5ff 887
rgrover1 980:07ce7d9ed5ff 888 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
rgrover1 980:07ce7d9ed5ff 889 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
rgrover1 980:07ce7d9ed5ff 890 # doxygen will generate files with .html extension.
rgrover1 980:07ce7d9ed5ff 891
rgrover1 980:07ce7d9ed5ff 892 HTML_FILE_EXTENSION = .html
rgrover1 980:07ce7d9ed5ff 893
rgrover1 980:07ce7d9ed5ff 894 # The HTML_HEADER tag can be used to specify a personal HTML header for
rgrover1 980:07ce7d9ed5ff 895 # each generated HTML page. If it is left blank doxygen will generate a
rgrover1 980:07ce7d9ed5ff 896 # standard header. Note that when using a custom header you are responsible
rgrover1 980:07ce7d9ed5ff 897 # for the proper inclusion of any scripts and style sheets that doxygen
rgrover1 980:07ce7d9ed5ff 898 # needs, which is dependent on the configuration options used.
rgrover1 980:07ce7d9ed5ff 899 # It is advised to generate a default header using "doxygen -w html
rgrover1 980:07ce7d9ed5ff 900 # header.html footer.html stylesheet.css YourConfigFile" and then modify
rgrover1 980:07ce7d9ed5ff 901 # that header. Note that the header is subject to change so you typically
rgrover1 980:07ce7d9ed5ff 902 # have to redo this when upgrading to a newer version of doxygen or when
rgrover1 980:07ce7d9ed5ff 903 # changing the value of configuration settings such as GENERATE_TREEVIEW!
rgrover1 980:07ce7d9ed5ff 904
rgrover1 980:07ce7d9ed5ff 905 HTML_HEADER =
rgrover1 980:07ce7d9ed5ff 906
rgrover1 980:07ce7d9ed5ff 907 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
rgrover1 980:07ce7d9ed5ff 908 # each generated HTML page. If it is left blank doxygen will generate a
rgrover1 980:07ce7d9ed5ff 909 # standard footer.
rgrover1 980:07ce7d9ed5ff 910
rgrover1 980:07ce7d9ed5ff 911 HTML_FOOTER =
rgrover1 980:07ce7d9ed5ff 912
rgrover1 980:07ce7d9ed5ff 913 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
rgrover1 980:07ce7d9ed5ff 914 # style sheet that is used by each HTML page. It can be used to
rgrover1 980:07ce7d9ed5ff 915 # fine-tune the look of the HTML output. If left blank doxygen will
rgrover1 980:07ce7d9ed5ff 916 # generate a default style sheet. Note that it is recommended to use
rgrover1 980:07ce7d9ed5ff 917 # HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this
rgrover1 980:07ce7d9ed5ff 918 # tag will in the future become obsolete.
rgrover1 980:07ce7d9ed5ff 919
rgrover1 980:07ce7d9ed5ff 920 HTML_STYLESHEET =
rgrover1 980:07ce7d9ed5ff 921
rgrover1 980:07ce7d9ed5ff 922 # The HTML_EXTRA_STYLESHEET tag can be used to specify an additional
rgrover1 980:07ce7d9ed5ff 923 # user-defined cascading style sheet that is included after the standard
rgrover1 980:07ce7d9ed5ff 924 # style sheets created by doxygen. Using this option one can overrule
rgrover1 980:07ce7d9ed5ff 925 # certain style aspects. This is preferred over using HTML_STYLESHEET
rgrover1 980:07ce7d9ed5ff 926 # since it does not replace the standard style sheet and is therefor more
rgrover1 980:07ce7d9ed5ff 927 # robust against future updates. Doxygen will copy the style sheet file to
rgrover1 980:07ce7d9ed5ff 928 # the output directory.
rgrover1 980:07ce7d9ed5ff 929
rgrover1 980:07ce7d9ed5ff 930 HTML_EXTRA_STYLESHEET =
rgrover1 980:07ce7d9ed5ff 931
rgrover1 980:07ce7d9ed5ff 932 # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
rgrover1 980:07ce7d9ed5ff 933 # other source files which should be copied to the HTML output directory. Note
rgrover1 980:07ce7d9ed5ff 934 # that these files will be copied to the base HTML output directory. Use the
rgrover1 980:07ce7d9ed5ff 935 # $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
rgrover1 980:07ce7d9ed5ff 936 # files. In the HTML_STYLESHEET file, use the file name only. Also note that
rgrover1 980:07ce7d9ed5ff 937 # the files will be copied as-is; there are no commands or markers available.
rgrover1 980:07ce7d9ed5ff 938
rgrover1 980:07ce7d9ed5ff 939 HTML_EXTRA_FILES =
rgrover1 980:07ce7d9ed5ff 940
rgrover1 980:07ce7d9ed5ff 941 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
rgrover1 980:07ce7d9ed5ff 942 # Doxygen will adjust the colors in the style sheet and background images
rgrover1 980:07ce7d9ed5ff 943 # according to this color. Hue is specified as an angle on a colorwheel,
rgrover1 980:07ce7d9ed5ff 944 # see http://en.wikipedia.org/wiki/Hue for more information.
rgrover1 980:07ce7d9ed5ff 945 # For instance the value 0 represents red, 60 is yellow, 120 is green,
rgrover1 980:07ce7d9ed5ff 946 # 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
rgrover1 980:07ce7d9ed5ff 947 # The allowed range is 0 to 359.
rgrover1 980:07ce7d9ed5ff 948
rgrover1 980:07ce7d9ed5ff 949 HTML_COLORSTYLE_HUE = 220
rgrover1 980:07ce7d9ed5ff 950
rgrover1 980:07ce7d9ed5ff 951 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
rgrover1 980:07ce7d9ed5ff 952 # the colors in the HTML output. For a value of 0 the output will use
rgrover1 980:07ce7d9ed5ff 953 # grayscales only. A value of 255 will produce the most vivid colors.
rgrover1 980:07ce7d9ed5ff 954
rgrover1 980:07ce7d9ed5ff 955 HTML_COLORSTYLE_SAT = 100
rgrover1 980:07ce7d9ed5ff 956
rgrover1 980:07ce7d9ed5ff 957 # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
rgrover1 980:07ce7d9ed5ff 958 # the luminance component of the colors in the HTML output. Values below
rgrover1 980:07ce7d9ed5ff 959 # 100 gradually make the output lighter, whereas values above 100 make
rgrover1 980:07ce7d9ed5ff 960 # the output darker. The value divided by 100 is the actual gamma applied,
rgrover1 980:07ce7d9ed5ff 961 # so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
rgrover1 980:07ce7d9ed5ff 962 # and 100 does not change the gamma.
rgrover1 980:07ce7d9ed5ff 963
rgrover1 980:07ce7d9ed5ff 964 HTML_COLORSTYLE_GAMMA = 80
rgrover1 980:07ce7d9ed5ff 965
rgrover1 980:07ce7d9ed5ff 966 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
rgrover1 980:07ce7d9ed5ff 967 # page will contain the date and time when the page was generated. Setting
rgrover1 980:07ce7d9ed5ff 968 # this to NO can help when comparing the output of multiple runs.
rgrover1 980:07ce7d9ed5ff 969
rgrover1 980:07ce7d9ed5ff 970 HTML_TIMESTAMP = YES
rgrover1 980:07ce7d9ed5ff 971
rgrover1 980:07ce7d9ed5ff 972 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
rgrover1 980:07ce7d9ed5ff 973 # documentation will contain sections that can be hidden and shown after the
rgrover1 980:07ce7d9ed5ff 974 # page has loaded.
rgrover1 980:07ce7d9ed5ff 975
rgrover1 980:07ce7d9ed5ff 976 HTML_DYNAMIC_SECTIONS = NO
rgrover1 980:07ce7d9ed5ff 977
rgrover1 980:07ce7d9ed5ff 978 # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
rgrover1 980:07ce7d9ed5ff 979 # entries shown in the various tree structured indices initially; the user
rgrover1 980:07ce7d9ed5ff 980 # can expand and collapse entries dynamically later on. Doxygen will expand
rgrover1 980:07ce7d9ed5ff 981 # the tree to such a level that at most the specified number of entries are
rgrover1 980:07ce7d9ed5ff 982 # visible (unless a fully collapsed tree already exceeds this amount).
rgrover1 980:07ce7d9ed5ff 983 # So setting the number of entries 1 will produce a full collapsed tree by
rgrover1 980:07ce7d9ed5ff 984 # default. 0 is a special value representing an infinite number of entries
rgrover1 980:07ce7d9ed5ff 985 # and will result in a full expanded tree by default.
rgrover1 980:07ce7d9ed5ff 986
rgrover1 980:07ce7d9ed5ff 987 HTML_INDEX_NUM_ENTRIES = 100
rgrover1 980:07ce7d9ed5ff 988
rgrover1 980:07ce7d9ed5ff 989 # If the GENERATE_DOCSET tag is set to YES, additional index files
rgrover1 980:07ce7d9ed5ff 990 # will be generated that can be used as input for Apple's Xcode 3
rgrover1 980:07ce7d9ed5ff 991 # integrated development environment, introduced with OSX 10.5 (Leopard).
rgrover1 980:07ce7d9ed5ff 992 # To create a documentation set, doxygen will generate a Makefile in the
rgrover1 980:07ce7d9ed5ff 993 # HTML output directory. Running make will produce the docset in that
rgrover1 980:07ce7d9ed5ff 994 # directory and running "make install" will install the docset in
rgrover1 980:07ce7d9ed5ff 995 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
rgrover1 980:07ce7d9ed5ff 996 # it at startup.
rgrover1 980:07ce7d9ed5ff 997 # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
rgrover1 980:07ce7d9ed5ff 998 # for more information.
rgrover1 980:07ce7d9ed5ff 999
rgrover1 980:07ce7d9ed5ff 1000 GENERATE_DOCSET = NO
rgrover1 980:07ce7d9ed5ff 1001
rgrover1 980:07ce7d9ed5ff 1002 # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
rgrover1 980:07ce7d9ed5ff 1003 # feed. A documentation feed provides an umbrella under which multiple
rgrover1 980:07ce7d9ed5ff 1004 # documentation sets from a single provider (such as a company or product suite)
rgrover1 980:07ce7d9ed5ff 1005 # can be grouped.
rgrover1 980:07ce7d9ed5ff 1006
rgrover1 980:07ce7d9ed5ff 1007 DOCSET_FEEDNAME = "Doxygen generated docs"
rgrover1 980:07ce7d9ed5ff 1008
rgrover1 980:07ce7d9ed5ff 1009 # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
rgrover1 980:07ce7d9ed5ff 1010 # should uniquely identify the documentation set bundle. This should be a
rgrover1 980:07ce7d9ed5ff 1011 # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
rgrover1 980:07ce7d9ed5ff 1012 # will append .docset to the name.
rgrover1 980:07ce7d9ed5ff 1013
rgrover1 980:07ce7d9ed5ff 1014 DOCSET_BUNDLE_ID = org.doxygen.Project
rgrover1 980:07ce7d9ed5ff 1015
rgrover1 980:07ce7d9ed5ff 1016 # When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely
rgrover1 980:07ce7d9ed5ff 1017 # identify the documentation publisher. This should be a reverse domain-name
rgrover1 980:07ce7d9ed5ff 1018 # style string, e.g. com.mycompany.MyDocSet.documentation.
rgrover1 980:07ce7d9ed5ff 1019
rgrover1 980:07ce7d9ed5ff 1020 DOCSET_PUBLISHER_ID = org.doxygen.Publisher
rgrover1 980:07ce7d9ed5ff 1021
rgrover1 980:07ce7d9ed5ff 1022 # The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
rgrover1 980:07ce7d9ed5ff 1023
rgrover1 980:07ce7d9ed5ff 1024 DOCSET_PUBLISHER_NAME = Publisher
rgrover1 980:07ce7d9ed5ff 1025
rgrover1 980:07ce7d9ed5ff 1026 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
rgrover1 980:07ce7d9ed5ff 1027 # will be generated that can be used as input for tools like the
rgrover1 980:07ce7d9ed5ff 1028 # Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
rgrover1 980:07ce7d9ed5ff 1029 # of the generated HTML documentation.
rgrover1 980:07ce7d9ed5ff 1030
rgrover1 980:07ce7d9ed5ff 1031 GENERATE_HTMLHELP = NO
rgrover1 980:07ce7d9ed5ff 1032
rgrover1 980:07ce7d9ed5ff 1033 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
rgrover1 980:07ce7d9ed5ff 1034 # be used to specify the file name of the resulting .chm file. You
rgrover1 980:07ce7d9ed5ff 1035 # can add a path in front of the file if the result should not be
rgrover1 980:07ce7d9ed5ff 1036 # written to the html output directory.
rgrover1 980:07ce7d9ed5ff 1037
rgrover1 980:07ce7d9ed5ff 1038 CHM_FILE =
rgrover1 980:07ce7d9ed5ff 1039
rgrover1 980:07ce7d9ed5ff 1040 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
rgrover1 980:07ce7d9ed5ff 1041 # be used to specify the location (absolute path including file name) of
rgrover1 980:07ce7d9ed5ff 1042 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
rgrover1 980:07ce7d9ed5ff 1043 # the HTML help compiler on the generated index.hhp.
rgrover1 980:07ce7d9ed5ff 1044
rgrover1 980:07ce7d9ed5ff 1045 HHC_LOCATION =
rgrover1 980:07ce7d9ed5ff 1046
rgrover1 980:07ce7d9ed5ff 1047 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
rgrover1 980:07ce7d9ed5ff 1048 # controls if a separate .chi index file is generated (YES) or that
rgrover1 980:07ce7d9ed5ff 1049 # it should be included in the master .chm file (NO).
rgrover1 980:07ce7d9ed5ff 1050
rgrover1 980:07ce7d9ed5ff 1051 GENERATE_CHI = NO
rgrover1 980:07ce7d9ed5ff 1052
rgrover1 980:07ce7d9ed5ff 1053 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
rgrover1 980:07ce7d9ed5ff 1054 # is used to encode HtmlHelp index (hhk), content (hhc) and project file
rgrover1 980:07ce7d9ed5ff 1055 # content.
rgrover1 980:07ce7d9ed5ff 1056
rgrover1 980:07ce7d9ed5ff 1057 CHM_INDEX_ENCODING =
rgrover1 980:07ce7d9ed5ff 1058
rgrover1 980:07ce7d9ed5ff 1059 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
rgrover1 980:07ce7d9ed5ff 1060 # controls whether a binary table of contents is generated (YES) or a
rgrover1 980:07ce7d9ed5ff 1061 # normal table of contents (NO) in the .chm file.
rgrover1 980:07ce7d9ed5ff 1062
rgrover1 980:07ce7d9ed5ff 1063 BINARY_TOC = NO
rgrover1 980:07ce7d9ed5ff 1064
rgrover1 980:07ce7d9ed5ff 1065 # The TOC_EXPAND flag can be set to YES to add extra items for group members
rgrover1 980:07ce7d9ed5ff 1066 # to the contents of the HTML help documentation and to the tree view.
rgrover1 980:07ce7d9ed5ff 1067
rgrover1 980:07ce7d9ed5ff 1068 TOC_EXPAND = NO
rgrover1 980:07ce7d9ed5ff 1069
rgrover1 980:07ce7d9ed5ff 1070 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
rgrover1 980:07ce7d9ed5ff 1071 # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
rgrover1 980:07ce7d9ed5ff 1072 # that can be used as input for Qt's qhelpgenerator to generate a
rgrover1 980:07ce7d9ed5ff 1073 # Qt Compressed Help (.qch) of the generated HTML documentation.
rgrover1 980:07ce7d9ed5ff 1074
rgrover1 980:07ce7d9ed5ff 1075 GENERATE_QHP = NO
rgrover1 980:07ce7d9ed5ff 1076
rgrover1 980:07ce7d9ed5ff 1077 # If the QHG_LOCATION tag is specified, the QCH_FILE tag can
rgrover1 980:07ce7d9ed5ff 1078 # be used to specify the file name of the resulting .qch file.
rgrover1 980:07ce7d9ed5ff 1079 # The path specified is relative to the HTML output folder.
rgrover1 980:07ce7d9ed5ff 1080
rgrover1 980:07ce7d9ed5ff 1081 QCH_FILE =
rgrover1 980:07ce7d9ed5ff 1082
rgrover1 980:07ce7d9ed5ff 1083 # The QHP_NAMESPACE tag specifies the namespace to use when generating
rgrover1 980:07ce7d9ed5ff 1084 # Qt Help Project output. For more information please see
rgrover1 980:07ce7d9ed5ff 1085 # http://doc.trolltech.com/qthelpproject.html#namespace
rgrover1 980:07ce7d9ed5ff 1086
rgrover1 980:07ce7d9ed5ff 1087 QHP_NAMESPACE = org.doxygen.Project
rgrover1 980:07ce7d9ed5ff 1088
rgrover1 980:07ce7d9ed5ff 1089 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
rgrover1 980:07ce7d9ed5ff 1090 # Qt Help Project output. For more information please see
rgrover1 980:07ce7d9ed5ff 1091 # http://doc.trolltech.com/qthelpproject.html#virtual-folders
rgrover1 980:07ce7d9ed5ff 1092
rgrover1 980:07ce7d9ed5ff 1093 QHP_VIRTUAL_FOLDER = doc
rgrover1 980:07ce7d9ed5ff 1094
rgrover1 980:07ce7d9ed5ff 1095 # If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
rgrover1 980:07ce7d9ed5ff 1096 # add. For more information please see
rgrover1 980:07ce7d9ed5ff 1097 # http://doc.trolltech.com/qthelpproject.html#custom-filters
rgrover1 980:07ce7d9ed5ff 1098
rgrover1 980:07ce7d9ed5ff 1099 QHP_CUST_FILTER_NAME =
rgrover1 980:07ce7d9ed5ff 1100
rgrover1 980:07ce7d9ed5ff 1101 # The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
rgrover1 980:07ce7d9ed5ff 1102 # custom filter to add. For more information please see
rgrover1 980:07ce7d9ed5ff 1103 # <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
rgrover1 980:07ce7d9ed5ff 1104 # Qt Help Project / Custom Filters</a>.
rgrover1 980:07ce7d9ed5ff 1105
rgrover1 980:07ce7d9ed5ff 1106 QHP_CUST_FILTER_ATTRS =
rgrover1 980:07ce7d9ed5ff 1107
rgrover1 980:07ce7d9ed5ff 1108 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
rgrover1 980:07ce7d9ed5ff 1109 # project's
rgrover1 980:07ce7d9ed5ff 1110 # filter section matches.
rgrover1 980:07ce7d9ed5ff 1111 # <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
rgrover1 980:07ce7d9ed5ff 1112 # Qt Help Project / Filter Attributes</a>.
rgrover1 980:07ce7d9ed5ff 1113
rgrover1 980:07ce7d9ed5ff 1114 QHP_SECT_FILTER_ATTRS =
rgrover1 980:07ce7d9ed5ff 1115
rgrover1 980:07ce7d9ed5ff 1116 # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
rgrover1 980:07ce7d9ed5ff 1117 # be used to specify the location of Qt's qhelpgenerator.
rgrover1 980:07ce7d9ed5ff 1118 # If non-empty doxygen will try to run qhelpgenerator on the generated
rgrover1 980:07ce7d9ed5ff 1119 # .qhp file.
rgrover1 980:07ce7d9ed5ff 1120
rgrover1 980:07ce7d9ed5ff 1121 QHG_LOCATION =
rgrover1 980:07ce7d9ed5ff 1122
rgrover1 980:07ce7d9ed5ff 1123 # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
rgrover1 980:07ce7d9ed5ff 1124 # will be generated, which together with the HTML files, form an Eclipse help
rgrover1 980:07ce7d9ed5ff 1125 # plugin. To install this plugin and make it available under the help contents
rgrover1 980:07ce7d9ed5ff 1126 # menu in Eclipse, the contents of the directory containing the HTML and XML
rgrover1 980:07ce7d9ed5ff 1127 # files needs to be copied into the plugins directory of eclipse. The name of
rgrover1 980:07ce7d9ed5ff 1128 # the directory within the plugins directory should be the same as
rgrover1 980:07ce7d9ed5ff 1129 # the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
rgrover1 980:07ce7d9ed5ff 1130 # the help appears.
rgrover1 980:07ce7d9ed5ff 1131
rgrover1 980:07ce7d9ed5ff 1132 GENERATE_ECLIPSEHELP = NO
rgrover1 980:07ce7d9ed5ff 1133
rgrover1 980:07ce7d9ed5ff 1134 # A unique identifier for the eclipse help plugin. When installing the plugin
rgrover1 980:07ce7d9ed5ff 1135 # the directory name containing the HTML and XML files should also have
rgrover1 980:07ce7d9ed5ff 1136 # this name.
rgrover1 980:07ce7d9ed5ff 1137
rgrover1 980:07ce7d9ed5ff 1138 ECLIPSE_DOC_ID = org.doxygen.Project
rgrover1 980:07ce7d9ed5ff 1139
rgrover1 980:07ce7d9ed5ff 1140 # The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
rgrover1 980:07ce7d9ed5ff 1141 # at top of each HTML page. The value NO (the default) enables the index and
rgrover1 980:07ce7d9ed5ff 1142 # the value YES disables it. Since the tabs have the same information as the
rgrover1 980:07ce7d9ed5ff 1143 # navigation tree you can set this option to NO if you already set
rgrover1 980:07ce7d9ed5ff 1144 # GENERATE_TREEVIEW to YES.
rgrover1 980:07ce7d9ed5ff 1145
rgrover1 980:07ce7d9ed5ff 1146 DISABLE_INDEX = NO
rgrover1 980:07ce7d9ed5ff 1147
rgrover1 980:07ce7d9ed5ff 1148 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
rgrover1 980:07ce7d9ed5ff 1149 # structure should be generated to display hierarchical information.
rgrover1 980:07ce7d9ed5ff 1150 # If the tag value is set to YES, a side panel will be generated
rgrover1 980:07ce7d9ed5ff 1151 # containing a tree-like index structure (just like the one that
rgrover1 980:07ce7d9ed5ff 1152 # is generated for HTML Help). For this to work a browser that supports
rgrover1 980:07ce7d9ed5ff 1153 # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
rgrover1 980:07ce7d9ed5ff 1154 # Windows users are probably better off using the HTML help feature.
rgrover1 980:07ce7d9ed5ff 1155 # Since the tree basically has the same information as the tab index you
rgrover1 980:07ce7d9ed5ff 1156 # could consider to set DISABLE_INDEX to NO when enabling this option.
rgrover1 980:07ce7d9ed5ff 1157
rgrover1 980:07ce7d9ed5ff 1158 GENERATE_TREEVIEW = NO
rgrover1 980:07ce7d9ed5ff 1159
rgrover1 980:07ce7d9ed5ff 1160 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
rgrover1 980:07ce7d9ed5ff 1161 # (range [0,1..20]) that doxygen will group on one line in the generated HTML
rgrover1 980:07ce7d9ed5ff 1162 # documentation. Note that a value of 0 will completely suppress the enum
rgrover1 980:07ce7d9ed5ff 1163 # values from appearing in the overview section.
rgrover1 980:07ce7d9ed5ff 1164
rgrover1 980:07ce7d9ed5ff 1165 ENUM_VALUES_PER_LINE = 4
rgrover1 980:07ce7d9ed5ff 1166
rgrover1 980:07ce7d9ed5ff 1167 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
rgrover1 980:07ce7d9ed5ff 1168 # used to set the initial width (in pixels) of the frame in which the tree
rgrover1 980:07ce7d9ed5ff 1169 # is shown.
rgrover1 980:07ce7d9ed5ff 1170
rgrover1 980:07ce7d9ed5ff 1171 TREEVIEW_WIDTH = 250
rgrover1 980:07ce7d9ed5ff 1172
rgrover1 980:07ce7d9ed5ff 1173 # When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
rgrover1 980:07ce7d9ed5ff 1174 # links to external symbols imported via tag files in a separate window.
rgrover1 980:07ce7d9ed5ff 1175
rgrover1 980:07ce7d9ed5ff 1176 EXT_LINKS_IN_WINDOW = NO
rgrover1 980:07ce7d9ed5ff 1177
rgrover1 980:07ce7d9ed5ff 1178 # Use this tag to change the font size of Latex formulas included
rgrover1 980:07ce7d9ed5ff 1179 # as images in the HTML documentation. The default is 10. Note that
rgrover1 980:07ce7d9ed5ff 1180 # when you change the font size after a successful doxygen run you need
rgrover1 980:07ce7d9ed5ff 1181 # to manually remove any form_*.png images from the HTML output directory
rgrover1 980:07ce7d9ed5ff 1182 # to force them to be regenerated.
rgrover1 980:07ce7d9ed5ff 1183
rgrover1 980:07ce7d9ed5ff 1184 FORMULA_FONTSIZE = 10
rgrover1 980:07ce7d9ed5ff 1185
rgrover1 980:07ce7d9ed5ff 1186 # Use the FORMULA_TRANPARENT tag to determine whether or not the images
rgrover1 980:07ce7d9ed5ff 1187 # generated for formulas are transparent PNGs. Transparent PNGs are
rgrover1 980:07ce7d9ed5ff 1188 # not supported properly for IE 6.0, but are supported on all modern browsers.
rgrover1 980:07ce7d9ed5ff 1189 # Note that when changing this option you need to delete any form_*.png files
rgrover1 980:07ce7d9ed5ff 1190 # in the HTML output before the changes have effect.
rgrover1 980:07ce7d9ed5ff 1191
rgrover1 980:07ce7d9ed5ff 1192 FORMULA_TRANSPARENT = YES
rgrover1 980:07ce7d9ed5ff 1193
rgrover1 980:07ce7d9ed5ff 1194 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
rgrover1 980:07ce7d9ed5ff 1195 # (see http://www.mathjax.org) which uses client side Javascript for the
rgrover1 980:07ce7d9ed5ff 1196 # rendering instead of using prerendered bitmaps. Use this if you do not
rgrover1 980:07ce7d9ed5ff 1197 # have LaTeX installed or if you want to formulas look prettier in the HTML
rgrover1 980:07ce7d9ed5ff 1198 # output. When enabled you may also need to install MathJax separately and
rgrover1 980:07ce7d9ed5ff 1199 # configure the path to it using the MATHJAX_RELPATH option.
rgrover1 980:07ce7d9ed5ff 1200
rgrover1 980:07ce7d9ed5ff 1201 USE_MATHJAX = NO
rgrover1 980:07ce7d9ed5ff 1202
rgrover1 980:07ce7d9ed5ff 1203 # When MathJax is enabled you can set the default output format to be used for
rgrover1 980:07ce7d9ed5ff 1204 # the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and
rgrover1 980:07ce7d9ed5ff 1205 # SVG. The default value is HTML-CSS, which is slower, but has the best
rgrover1 980:07ce7d9ed5ff 1206 # compatibility.
rgrover1 980:07ce7d9ed5ff 1207
rgrover1 980:07ce7d9ed5ff 1208 MATHJAX_FORMAT = HTML-CSS
rgrover1 980:07ce7d9ed5ff 1209
rgrover1 980:07ce7d9ed5ff 1210 # When MathJax is enabled you need to specify the location relative to the
rgrover1 980:07ce7d9ed5ff 1211 # HTML output directory using the MATHJAX_RELPATH option. The destination
rgrover1 980:07ce7d9ed5ff 1212 # directory should contain the MathJax.js script. For instance, if the mathjax
rgrover1 980:07ce7d9ed5ff 1213 # directory is located at the same level as the HTML output directory, then
rgrover1 980:07ce7d9ed5ff 1214 # MATHJAX_RELPATH should be ../mathjax. The default value points to
rgrover1 980:07ce7d9ed5ff 1215 # the MathJax Content Delivery Network so you can quickly see the result without
rgrover1 980:07ce7d9ed5ff 1216 # installing MathJax.
rgrover1 980:07ce7d9ed5ff 1217 # However, it is strongly recommended to install a local
rgrover1 980:07ce7d9ed5ff 1218 # copy of MathJax from http://www.mathjax.org before deployment.
rgrover1 980:07ce7d9ed5ff 1219
rgrover1 980:07ce7d9ed5ff 1220 MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
rgrover1 980:07ce7d9ed5ff 1221
rgrover1 980:07ce7d9ed5ff 1222 # The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
rgrover1 980:07ce7d9ed5ff 1223 # names that should be enabled during MathJax rendering.
rgrover1 980:07ce7d9ed5ff 1224
rgrover1 980:07ce7d9ed5ff 1225 MATHJAX_EXTENSIONS =
rgrover1 980:07ce7d9ed5ff 1226
rgrover1 980:07ce7d9ed5ff 1227 # The MATHJAX_CODEFILE tag can be used to specify a file with javascript
rgrover1 980:07ce7d9ed5ff 1228 # pieces of code that will be used on startup of the MathJax code.
rgrover1 980:07ce7d9ed5ff 1229
rgrover1 980:07ce7d9ed5ff 1230 MATHJAX_CODEFILE =
rgrover1 980:07ce7d9ed5ff 1231
rgrover1 980:07ce7d9ed5ff 1232 # When the SEARCHENGINE tag is enabled doxygen will generate a search box
rgrover1 980:07ce7d9ed5ff 1233 # for the HTML output. The underlying search engine uses javascript
rgrover1 980:07ce7d9ed5ff 1234 # and DHTML and should work on any modern browser. Note that when using
rgrover1 980:07ce7d9ed5ff 1235 # HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
rgrover1 980:07ce7d9ed5ff 1236 # (GENERATE_DOCSET) there is already a search function so this one should
rgrover1 980:07ce7d9ed5ff 1237 # typically be disabled. For large projects the javascript based search engine
rgrover1 980:07ce7d9ed5ff 1238 # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
rgrover1 980:07ce7d9ed5ff 1239
rgrover1 980:07ce7d9ed5ff 1240 SEARCHENGINE = NO
rgrover1 980:07ce7d9ed5ff 1241
rgrover1 980:07ce7d9ed5ff 1242 # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
rgrover1 980:07ce7d9ed5ff 1243 # implemented using a web server instead of a web client using Javascript.
rgrover1 980:07ce7d9ed5ff 1244 # There are two flavours of web server based search depending on the
rgrover1 980:07ce7d9ed5ff 1245 # EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for
rgrover1 980:07ce7d9ed5ff 1246 # searching and an index file used by the script. When EXTERNAL_SEARCH is
rgrover1 980:07ce7d9ed5ff 1247 # enabled the indexing and searching needs to be provided by external tools.
rgrover1 980:07ce7d9ed5ff 1248 # See the manual for details.
rgrover1 980:07ce7d9ed5ff 1249
rgrover1 980:07ce7d9ed5ff 1250 SERVER_BASED_SEARCH = NO
rgrover1 980:07ce7d9ed5ff 1251
rgrover1 980:07ce7d9ed5ff 1252 # When EXTERNAL_SEARCH is enabled doxygen will no longer generate the PHP
rgrover1 980:07ce7d9ed5ff 1253 # script for searching. Instead the search results are written to an XML file
rgrover1 980:07ce7d9ed5ff 1254 # which needs to be processed by an external indexer. Doxygen will invoke an
rgrover1 980:07ce7d9ed5ff 1255 # external search engine pointed to by the SEARCHENGINE_URL option to obtain
rgrover1 980:07ce7d9ed5ff 1256 # the search results. Doxygen ships with an example indexer (doxyindexer) and
rgrover1 980:07ce7d9ed5ff 1257 # search engine (doxysearch.cgi) which are based on the open source search
rgrover1 980:07ce7d9ed5ff 1258 # engine library Xapian. See the manual for configuration details.
rgrover1 980:07ce7d9ed5ff 1259
rgrover1 980:07ce7d9ed5ff 1260 EXTERNAL_SEARCH = NO
rgrover1 980:07ce7d9ed5ff 1261
rgrover1 980:07ce7d9ed5ff 1262 # The SEARCHENGINE_URL should point to a search engine hosted by a web server
rgrover1 980:07ce7d9ed5ff 1263 # which will returned the search results when EXTERNAL_SEARCH is enabled.
rgrover1 980:07ce7d9ed5ff 1264 # Doxygen ships with an example search engine (doxysearch) which is based on
rgrover1 980:07ce7d9ed5ff 1265 # the open source search engine library Xapian. See the manual for configuration
rgrover1 980:07ce7d9ed5ff 1266 # details.
rgrover1 980:07ce7d9ed5ff 1267
rgrover1 980:07ce7d9ed5ff 1268 SEARCHENGINE_URL =
rgrover1 980:07ce7d9ed5ff 1269
rgrover1 980:07ce7d9ed5ff 1270 # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
rgrover1 980:07ce7d9ed5ff 1271 # search data is written to a file for indexing by an external tool. With the
rgrover1 980:07ce7d9ed5ff 1272 # SEARCHDATA_FILE tag the name of this file can be specified.
rgrover1 980:07ce7d9ed5ff 1273
rgrover1 980:07ce7d9ed5ff 1274 SEARCHDATA_FILE = searchdata.xml
rgrover1 980:07ce7d9ed5ff 1275
rgrover1 980:07ce7d9ed5ff 1276 # When SERVER_BASED_SEARCH AND EXTERNAL_SEARCH are both enabled the
rgrover1 980:07ce7d9ed5ff 1277 # EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
rgrover1 980:07ce7d9ed5ff 1278 # useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
rgrover1 980:07ce7d9ed5ff 1279 # projects and redirect the results back to the right project.
rgrover1 980:07ce7d9ed5ff 1280
rgrover1 980:07ce7d9ed5ff 1281 EXTERNAL_SEARCH_ID =
rgrover1 980:07ce7d9ed5ff 1282
rgrover1 980:07ce7d9ed5ff 1283 # The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
rgrover1 980:07ce7d9ed5ff 1284 # projects other than the one defined by this configuration file, but that are
rgrover1 980:07ce7d9ed5ff 1285 # all added to the same external search index. Each project needs to have a
rgrover1 980:07ce7d9ed5ff 1286 # unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id
rgrover1 980:07ce7d9ed5ff 1287 # of to a relative location where the documentation can be found.
rgrover1 980:07ce7d9ed5ff 1288 # The format is: EXTRA_SEARCH_MAPPINGS = id1=loc1 id2=loc2 ...
rgrover1 980:07ce7d9ed5ff 1289
rgrover1 980:07ce7d9ed5ff 1290 EXTRA_SEARCH_MAPPINGS =
rgrover1 980:07ce7d9ed5ff 1291
rgrover1 980:07ce7d9ed5ff 1292 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1293 # configuration options related to the LaTeX output
rgrover1 980:07ce7d9ed5ff 1294 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1295
rgrover1 980:07ce7d9ed5ff 1296 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 1297 # generate Latex output.
rgrover1 980:07ce7d9ed5ff 1298
rgrover1 980:07ce7d9ed5ff 1299 GENERATE_LATEX = NO
rgrover1 980:07ce7d9ed5ff 1300
rgrover1 980:07ce7d9ed5ff 1301 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
rgrover1 980:07ce7d9ed5ff 1302 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
rgrover1 980:07ce7d9ed5ff 1303 # put in front of it. If left blank `latex' will be used as the default path.
rgrover1 980:07ce7d9ed5ff 1304
rgrover1 980:07ce7d9ed5ff 1305 LATEX_OUTPUT = latex
rgrover1 980:07ce7d9ed5ff 1306
rgrover1 980:07ce7d9ed5ff 1307 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
rgrover1 980:07ce7d9ed5ff 1308 # invoked. If left blank `latex' will be used as the default command name.
rgrover1 980:07ce7d9ed5ff 1309 # Note that when enabling USE_PDFLATEX this option is only used for
rgrover1 980:07ce7d9ed5ff 1310 # generating bitmaps for formulas in the HTML output, but not in the
rgrover1 980:07ce7d9ed5ff 1311 # Makefile that is written to the output directory.
rgrover1 980:07ce7d9ed5ff 1312
rgrover1 980:07ce7d9ed5ff 1313 LATEX_CMD_NAME = latex
rgrover1 980:07ce7d9ed5ff 1314
rgrover1 980:07ce7d9ed5ff 1315 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
rgrover1 980:07ce7d9ed5ff 1316 # generate index for LaTeX. If left blank `makeindex' will be used as the
rgrover1 980:07ce7d9ed5ff 1317 # default command name.
rgrover1 980:07ce7d9ed5ff 1318
rgrover1 980:07ce7d9ed5ff 1319 MAKEINDEX_CMD_NAME = makeindex
rgrover1 980:07ce7d9ed5ff 1320
rgrover1 980:07ce7d9ed5ff 1321 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
rgrover1 980:07ce7d9ed5ff 1322 # LaTeX documents. This may be useful for small projects and may help to
rgrover1 980:07ce7d9ed5ff 1323 # save some trees in general.
rgrover1 980:07ce7d9ed5ff 1324
rgrover1 980:07ce7d9ed5ff 1325 COMPACT_LATEX = YES
rgrover1 980:07ce7d9ed5ff 1326
rgrover1 980:07ce7d9ed5ff 1327 # The PAPER_TYPE tag can be used to set the paper type that is used
rgrover1 980:07ce7d9ed5ff 1328 # by the printer. Possible values are: a4, letter, legal and
rgrover1 980:07ce7d9ed5ff 1329 # executive. If left blank a4 will be used.
rgrover1 980:07ce7d9ed5ff 1330
rgrover1 980:07ce7d9ed5ff 1331 PAPER_TYPE = a4wide
rgrover1 980:07ce7d9ed5ff 1332
rgrover1 980:07ce7d9ed5ff 1333 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
rgrover1 980:07ce7d9ed5ff 1334 # packages that should be included in the LaTeX output.
rgrover1 980:07ce7d9ed5ff 1335
rgrover1 980:07ce7d9ed5ff 1336 EXTRA_PACKAGES =
rgrover1 980:07ce7d9ed5ff 1337
rgrover1 980:07ce7d9ed5ff 1338 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
rgrover1 980:07ce7d9ed5ff 1339 # the generated latex document. The header should contain everything until
rgrover1 980:07ce7d9ed5ff 1340 # the first chapter. If it is left blank doxygen will generate a
rgrover1 980:07ce7d9ed5ff 1341 # standard header. Notice: only use this tag if you know what you are doing!
rgrover1 980:07ce7d9ed5ff 1342
rgrover1 980:07ce7d9ed5ff 1343 LATEX_HEADER =
rgrover1 980:07ce7d9ed5ff 1344
rgrover1 980:07ce7d9ed5ff 1345 # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
rgrover1 980:07ce7d9ed5ff 1346 # the generated latex document. The footer should contain everything after
rgrover1 980:07ce7d9ed5ff 1347 # the last chapter. If it is left blank doxygen will generate a
rgrover1 980:07ce7d9ed5ff 1348 # standard footer. Notice: only use this tag if you know what you are doing!
rgrover1 980:07ce7d9ed5ff 1349
rgrover1 980:07ce7d9ed5ff 1350 LATEX_FOOTER =
rgrover1 980:07ce7d9ed5ff 1351
rgrover1 980:07ce7d9ed5ff 1352 # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images
rgrover1 980:07ce7d9ed5ff 1353 # or other source files which should be copied to the LaTeX output directory.
rgrover1 980:07ce7d9ed5ff 1354 # Note that the files will be copied as-is; there are no commands or markers
rgrover1 980:07ce7d9ed5ff 1355 # available.
rgrover1 980:07ce7d9ed5ff 1356
rgrover1 980:07ce7d9ed5ff 1357 LATEX_EXTRA_FILES =
rgrover1 980:07ce7d9ed5ff 1358
rgrover1 980:07ce7d9ed5ff 1359 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
rgrover1 980:07ce7d9ed5ff 1360 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
rgrover1 980:07ce7d9ed5ff 1361 # contain links (just like the HTML output) instead of page references
rgrover1 980:07ce7d9ed5ff 1362 # This makes the output suitable for online browsing using a pdf viewer.
rgrover1 980:07ce7d9ed5ff 1363
rgrover1 980:07ce7d9ed5ff 1364 PDF_HYPERLINKS = YES
rgrover1 980:07ce7d9ed5ff 1365
rgrover1 980:07ce7d9ed5ff 1366 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
rgrover1 980:07ce7d9ed5ff 1367 # plain latex in the generated Makefile. Set this option to YES to get a
rgrover1 980:07ce7d9ed5ff 1368 # higher quality PDF documentation.
rgrover1 980:07ce7d9ed5ff 1369
rgrover1 980:07ce7d9ed5ff 1370 USE_PDFLATEX = YES
rgrover1 980:07ce7d9ed5ff 1371
rgrover1 980:07ce7d9ed5ff 1372 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
rgrover1 980:07ce7d9ed5ff 1373 # command to the generated LaTeX files. This will instruct LaTeX to keep
rgrover1 980:07ce7d9ed5ff 1374 # running if errors occur, instead of asking the user for help.
rgrover1 980:07ce7d9ed5ff 1375 # This option is also used when generating formulas in HTML.
rgrover1 980:07ce7d9ed5ff 1376
rgrover1 980:07ce7d9ed5ff 1377 LATEX_BATCHMODE = NO
rgrover1 980:07ce7d9ed5ff 1378
rgrover1 980:07ce7d9ed5ff 1379 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
rgrover1 980:07ce7d9ed5ff 1380 # include the index chapters (such as File Index, Compound Index, etc.)
rgrover1 980:07ce7d9ed5ff 1381 # in the output.
rgrover1 980:07ce7d9ed5ff 1382
rgrover1 980:07ce7d9ed5ff 1383 LATEX_HIDE_INDICES = NO
rgrover1 980:07ce7d9ed5ff 1384
rgrover1 980:07ce7d9ed5ff 1385 # If LATEX_SOURCE_CODE is set to YES then doxygen will include
rgrover1 980:07ce7d9ed5ff 1386 # source code with syntax highlighting in the LaTeX output.
rgrover1 980:07ce7d9ed5ff 1387 # Note that which sources are shown also depends on other settings
rgrover1 980:07ce7d9ed5ff 1388 # such as SOURCE_BROWSER.
rgrover1 980:07ce7d9ed5ff 1389
rgrover1 980:07ce7d9ed5ff 1390 LATEX_SOURCE_CODE = NO
rgrover1 980:07ce7d9ed5ff 1391
rgrover1 980:07ce7d9ed5ff 1392 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
rgrover1 980:07ce7d9ed5ff 1393 # bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
rgrover1 980:07ce7d9ed5ff 1394 # http://en.wikipedia.org/wiki/BibTeX for more info.
rgrover1 980:07ce7d9ed5ff 1395
rgrover1 980:07ce7d9ed5ff 1396 LATEX_BIB_STYLE = plain
rgrover1 980:07ce7d9ed5ff 1397
rgrover1 980:07ce7d9ed5ff 1398 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1399 # configuration options related to the RTF output
rgrover1 980:07ce7d9ed5ff 1400 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1401
rgrover1 980:07ce7d9ed5ff 1402 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
rgrover1 980:07ce7d9ed5ff 1403 # The RTF output is optimized for Word 97 and may not look very pretty with
rgrover1 980:07ce7d9ed5ff 1404 # other RTF readers or editors.
rgrover1 980:07ce7d9ed5ff 1405
rgrover1 980:07ce7d9ed5ff 1406 GENERATE_RTF = NO
rgrover1 980:07ce7d9ed5ff 1407
rgrover1 980:07ce7d9ed5ff 1408 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
rgrover1 980:07ce7d9ed5ff 1409 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
rgrover1 980:07ce7d9ed5ff 1410 # put in front of it. If left blank `rtf' will be used as the default path.
rgrover1 980:07ce7d9ed5ff 1411
rgrover1 980:07ce7d9ed5ff 1412 RTF_OUTPUT = rtf
rgrover1 980:07ce7d9ed5ff 1413
rgrover1 980:07ce7d9ed5ff 1414 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
rgrover1 980:07ce7d9ed5ff 1415 # RTF documents. This may be useful for small projects and may help to
rgrover1 980:07ce7d9ed5ff 1416 # save some trees in general.
rgrover1 980:07ce7d9ed5ff 1417
rgrover1 980:07ce7d9ed5ff 1418 COMPACT_RTF = NO
rgrover1 980:07ce7d9ed5ff 1419
rgrover1 980:07ce7d9ed5ff 1420 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
rgrover1 980:07ce7d9ed5ff 1421 # will contain hyperlink fields. The RTF file will
rgrover1 980:07ce7d9ed5ff 1422 # contain links (just like the HTML output) instead of page references.
rgrover1 980:07ce7d9ed5ff 1423 # This makes the output suitable for online browsing using WORD or other
rgrover1 980:07ce7d9ed5ff 1424 # programs which support those fields.
rgrover1 980:07ce7d9ed5ff 1425 # Note: wordpad (write) and others do not support links.
rgrover1 980:07ce7d9ed5ff 1426
rgrover1 980:07ce7d9ed5ff 1427 RTF_HYPERLINKS = NO
rgrover1 980:07ce7d9ed5ff 1428
rgrover1 980:07ce7d9ed5ff 1429 # Load style sheet definitions from file. Syntax is similar to doxygen's
rgrover1 980:07ce7d9ed5ff 1430 # config file, i.e. a series of assignments. You only have to provide
rgrover1 980:07ce7d9ed5ff 1431 # replacements, missing definitions are set to their default value.
rgrover1 980:07ce7d9ed5ff 1432
rgrover1 980:07ce7d9ed5ff 1433 RTF_STYLESHEET_FILE =
rgrover1 980:07ce7d9ed5ff 1434
rgrover1 980:07ce7d9ed5ff 1435 # Set optional variables used in the generation of an rtf document.
rgrover1 980:07ce7d9ed5ff 1436 # Syntax is similar to doxygen's config file.
rgrover1 980:07ce7d9ed5ff 1437
rgrover1 980:07ce7d9ed5ff 1438 RTF_EXTENSIONS_FILE =
rgrover1 980:07ce7d9ed5ff 1439
rgrover1 980:07ce7d9ed5ff 1440 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1441 # configuration options related to the man page output
rgrover1 980:07ce7d9ed5ff 1442 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1443
rgrover1 980:07ce7d9ed5ff 1444 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 1445 # generate man pages
rgrover1 980:07ce7d9ed5ff 1446
rgrover1 980:07ce7d9ed5ff 1447 GENERATE_MAN = NO
rgrover1 980:07ce7d9ed5ff 1448
rgrover1 980:07ce7d9ed5ff 1449 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
rgrover1 980:07ce7d9ed5ff 1450 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
rgrover1 980:07ce7d9ed5ff 1451 # put in front of it. If left blank `man' will be used as the default path.
rgrover1 980:07ce7d9ed5ff 1452
rgrover1 980:07ce7d9ed5ff 1453 MAN_OUTPUT = man
rgrover1 980:07ce7d9ed5ff 1454
rgrover1 980:07ce7d9ed5ff 1455 # The MAN_EXTENSION tag determines the extension that is added to
rgrover1 980:07ce7d9ed5ff 1456 # the generated man pages (default is the subroutine's section .3)
rgrover1 980:07ce7d9ed5ff 1457
rgrover1 980:07ce7d9ed5ff 1458 MAN_EXTENSION = .3
rgrover1 980:07ce7d9ed5ff 1459
rgrover1 980:07ce7d9ed5ff 1460 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
rgrover1 980:07ce7d9ed5ff 1461 # then it will generate one additional man file for each entity
rgrover1 980:07ce7d9ed5ff 1462 # documented in the real man page(s). These additional files
rgrover1 980:07ce7d9ed5ff 1463 # only source the real man page, but without them the man command
rgrover1 980:07ce7d9ed5ff 1464 # would be unable to find the correct page. The default is NO.
rgrover1 980:07ce7d9ed5ff 1465
rgrover1 980:07ce7d9ed5ff 1466 MAN_LINKS = NO
rgrover1 980:07ce7d9ed5ff 1467
rgrover1 980:07ce7d9ed5ff 1468 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1469 # configuration options related to the XML output
rgrover1 980:07ce7d9ed5ff 1470 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1471
rgrover1 980:07ce7d9ed5ff 1472 # If the GENERATE_XML tag is set to YES Doxygen will
rgrover1 980:07ce7d9ed5ff 1473 # generate an XML file that captures the structure of
rgrover1 980:07ce7d9ed5ff 1474 # the code including all documentation.
rgrover1 980:07ce7d9ed5ff 1475
rgrover1 980:07ce7d9ed5ff 1476 GENERATE_XML = NO
rgrover1 980:07ce7d9ed5ff 1477
rgrover1 980:07ce7d9ed5ff 1478 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
rgrover1 980:07ce7d9ed5ff 1479 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
rgrover1 980:07ce7d9ed5ff 1480 # put in front of it. If left blank `xml' will be used as the default path.
rgrover1 980:07ce7d9ed5ff 1481
rgrover1 980:07ce7d9ed5ff 1482 XML_OUTPUT = xml
rgrover1 980:07ce7d9ed5ff 1483
rgrover1 980:07ce7d9ed5ff 1484 # The XML_SCHEMA tag can be used to specify an XML schema,
rgrover1 980:07ce7d9ed5ff 1485 # which can be used by a validating XML parser to check the
rgrover1 980:07ce7d9ed5ff 1486 # syntax of the XML files.
rgrover1 980:07ce7d9ed5ff 1487
rgrover1 980:07ce7d9ed5ff 1488 XML_SCHEMA =
rgrover1 980:07ce7d9ed5ff 1489
rgrover1 980:07ce7d9ed5ff 1490 # The XML_DTD tag can be used to specify an XML DTD,
rgrover1 980:07ce7d9ed5ff 1491 # which can be used by a validating XML parser to check the
rgrover1 980:07ce7d9ed5ff 1492 # syntax of the XML files.
rgrover1 980:07ce7d9ed5ff 1493
rgrover1 980:07ce7d9ed5ff 1494 XML_DTD =
rgrover1 980:07ce7d9ed5ff 1495
rgrover1 980:07ce7d9ed5ff 1496 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
rgrover1 980:07ce7d9ed5ff 1497 # dump the program listings (including syntax highlighting
rgrover1 980:07ce7d9ed5ff 1498 # and cross-referencing information) to the XML output. Note that
rgrover1 980:07ce7d9ed5ff 1499 # enabling this will significantly increase the size of the XML output.
rgrover1 980:07ce7d9ed5ff 1500
rgrover1 980:07ce7d9ed5ff 1501 XML_PROGRAMLISTING = YES
rgrover1 980:07ce7d9ed5ff 1502
rgrover1 980:07ce7d9ed5ff 1503 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1504 # configuration options related to the DOCBOOK output
rgrover1 980:07ce7d9ed5ff 1505 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1506
rgrover1 980:07ce7d9ed5ff 1507 # If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files
rgrover1 980:07ce7d9ed5ff 1508 # that can be used to generate PDF.
rgrover1 980:07ce7d9ed5ff 1509
rgrover1 980:07ce7d9ed5ff 1510 GENERATE_DOCBOOK = NO
rgrover1 980:07ce7d9ed5ff 1511
rgrover1 980:07ce7d9ed5ff 1512 # The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put.
rgrover1 980:07ce7d9ed5ff 1513 # If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
rgrover1 980:07ce7d9ed5ff 1514 # front of it. If left blank docbook will be used as the default path.
rgrover1 980:07ce7d9ed5ff 1515
rgrover1 980:07ce7d9ed5ff 1516 DOCBOOK_OUTPUT = docbook
rgrover1 980:07ce7d9ed5ff 1517
rgrover1 980:07ce7d9ed5ff 1518 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1519 # configuration options for the AutoGen Definitions output
rgrover1 980:07ce7d9ed5ff 1520 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1521
rgrover1 980:07ce7d9ed5ff 1522 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
rgrover1 980:07ce7d9ed5ff 1523 # generate an AutoGen Definitions (see autogen.sf.net) file
rgrover1 980:07ce7d9ed5ff 1524 # that captures the structure of the code including all
rgrover1 980:07ce7d9ed5ff 1525 # documentation. Note that this feature is still experimental
rgrover1 980:07ce7d9ed5ff 1526 # and incomplete at the moment.
rgrover1 980:07ce7d9ed5ff 1527
rgrover1 980:07ce7d9ed5ff 1528 GENERATE_AUTOGEN_DEF = NO
rgrover1 980:07ce7d9ed5ff 1529
rgrover1 980:07ce7d9ed5ff 1530 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1531 # configuration options related to the Perl module output
rgrover1 980:07ce7d9ed5ff 1532 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1533
rgrover1 980:07ce7d9ed5ff 1534 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
rgrover1 980:07ce7d9ed5ff 1535 # generate a Perl module file that captures the structure of
rgrover1 980:07ce7d9ed5ff 1536 # the code including all documentation. Note that this
rgrover1 980:07ce7d9ed5ff 1537 # feature is still experimental and incomplete at the
rgrover1 980:07ce7d9ed5ff 1538 # moment.
rgrover1 980:07ce7d9ed5ff 1539
rgrover1 980:07ce7d9ed5ff 1540 GENERATE_PERLMOD = NO
rgrover1 980:07ce7d9ed5ff 1541
rgrover1 980:07ce7d9ed5ff 1542 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
rgrover1 980:07ce7d9ed5ff 1543 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
rgrover1 980:07ce7d9ed5ff 1544 # to generate PDF and DVI output from the Perl module output.
rgrover1 980:07ce7d9ed5ff 1545
rgrover1 980:07ce7d9ed5ff 1546 PERLMOD_LATEX = NO
rgrover1 980:07ce7d9ed5ff 1547
rgrover1 980:07ce7d9ed5ff 1548 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
rgrover1 980:07ce7d9ed5ff 1549 # nicely formatted so it can be parsed by a human reader.
rgrover1 980:07ce7d9ed5ff 1550 # This is useful
rgrover1 980:07ce7d9ed5ff 1551 # if you want to understand what is going on.
rgrover1 980:07ce7d9ed5ff 1552 # On the other hand, if this
rgrover1 980:07ce7d9ed5ff 1553 # tag is set to NO the size of the Perl module output will be much smaller
rgrover1 980:07ce7d9ed5ff 1554 # and Perl will parse it just the same.
rgrover1 980:07ce7d9ed5ff 1555
rgrover1 980:07ce7d9ed5ff 1556 PERLMOD_PRETTY = YES
rgrover1 980:07ce7d9ed5ff 1557
rgrover1 980:07ce7d9ed5ff 1558 # The names of the make variables in the generated doxyrules.make file
rgrover1 980:07ce7d9ed5ff 1559 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
rgrover1 980:07ce7d9ed5ff 1560 # This is useful so different doxyrules.make files included by the same
rgrover1 980:07ce7d9ed5ff 1561 # Makefile don't overwrite each other's variables.
rgrover1 980:07ce7d9ed5ff 1562
rgrover1 980:07ce7d9ed5ff 1563 PERLMOD_MAKEVAR_PREFIX =
rgrover1 980:07ce7d9ed5ff 1564
rgrover1 980:07ce7d9ed5ff 1565 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1566 # Configuration options related to the preprocessor
rgrover1 980:07ce7d9ed5ff 1567 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1568
rgrover1 980:07ce7d9ed5ff 1569 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 1570 # evaluate all C-preprocessor directives found in the sources and include
rgrover1 980:07ce7d9ed5ff 1571 # files.
rgrover1 980:07ce7d9ed5ff 1572
rgrover1 980:07ce7d9ed5ff 1573 ENABLE_PREPROCESSING = YES
rgrover1 980:07ce7d9ed5ff 1574
rgrover1 980:07ce7d9ed5ff 1575 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
rgrover1 980:07ce7d9ed5ff 1576 # names in the source code. If set to NO (the default) only conditional
rgrover1 980:07ce7d9ed5ff 1577 # compilation will be performed. Macro expansion can be done in a controlled
rgrover1 980:07ce7d9ed5ff 1578 # way by setting EXPAND_ONLY_PREDEF to YES.
rgrover1 980:07ce7d9ed5ff 1579
rgrover1 980:07ce7d9ed5ff 1580 MACRO_EXPANSION = NO
rgrover1 980:07ce7d9ed5ff 1581
rgrover1 980:07ce7d9ed5ff 1582 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
rgrover1 980:07ce7d9ed5ff 1583 # then the macro expansion is limited to the macros specified with the
rgrover1 980:07ce7d9ed5ff 1584 # PREDEFINED and EXPAND_AS_DEFINED tags.
rgrover1 980:07ce7d9ed5ff 1585
rgrover1 980:07ce7d9ed5ff 1586 EXPAND_ONLY_PREDEF = NO
rgrover1 980:07ce7d9ed5ff 1587
rgrover1 980:07ce7d9ed5ff 1588 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
rgrover1 980:07ce7d9ed5ff 1589 # pointed to by INCLUDE_PATH will be searched when a #include is found.
rgrover1 980:07ce7d9ed5ff 1590
rgrover1 980:07ce7d9ed5ff 1591 SEARCH_INCLUDES = YES
rgrover1 980:07ce7d9ed5ff 1592
rgrover1 980:07ce7d9ed5ff 1593 # The INCLUDE_PATH tag can be used to specify one or more directories that
rgrover1 980:07ce7d9ed5ff 1594 # contain include files that are not input files but should be processed by
rgrover1 980:07ce7d9ed5ff 1595 # the preprocessor.
rgrover1 980:07ce7d9ed5ff 1596
rgrover1 980:07ce7d9ed5ff 1597 INCLUDE_PATH =
rgrover1 980:07ce7d9ed5ff 1598
rgrover1 980:07ce7d9ed5ff 1599 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
rgrover1 980:07ce7d9ed5ff 1600 # patterns (like *.h and *.hpp) to filter out the header-files in the
rgrover1 980:07ce7d9ed5ff 1601 # directories. If left blank, the patterns specified with FILE_PATTERNS will
rgrover1 980:07ce7d9ed5ff 1602 # be used.
rgrover1 980:07ce7d9ed5ff 1603
rgrover1 980:07ce7d9ed5ff 1604 INCLUDE_FILE_PATTERNS =
rgrover1 980:07ce7d9ed5ff 1605
rgrover1 980:07ce7d9ed5ff 1606 # The PREDEFINED tag can be used to specify one or more macro names that
rgrover1 980:07ce7d9ed5ff 1607 # are defined before the preprocessor is started (similar to the -D option of
rgrover1 980:07ce7d9ed5ff 1608 # gcc). The argument of the tag is a list of macros of the form: name
rgrover1 980:07ce7d9ed5ff 1609 # or name=definition (no spaces). If the definition and the = are
rgrover1 980:07ce7d9ed5ff 1610 # omitted =1 is assumed. To prevent a macro definition from being
rgrover1 980:07ce7d9ed5ff 1611 # undefined via #undef or recursively expanded use the := operator
rgrover1 980:07ce7d9ed5ff 1612 # instead of the = operator.
rgrover1 980:07ce7d9ed5ff 1613
rgrover1 980:07ce7d9ed5ff 1614 PREDEFINED = WIN32 \
rgrover1 980:07ce7d9ed5ff 1615 NTLM \
rgrover1 980:07ce7d9ed5ff 1616 USE_LZO \
rgrover1 980:07ce7d9ed5ff 1617 ENABLE_FRAGMENT \
rgrover1 980:07ce7d9ed5ff 1618 P2MP \
rgrover1 980:07ce7d9ed5ff 1619 P2MP_SERVER \
rgrover1 980:07ce7d9ed5ff 1620 USE_CRYPTO \
rgrover1 980:07ce7d9ed5ff 1621 USE_SSL \
rgrover1 980:07ce7d9ed5ff 1622 ENABLE_PLUGIN \
rgrover1 980:07ce7d9ed5ff 1623 ENABLE_MANAGEMENT \
rgrover1 980:07ce7d9ed5ff 1624 ENABLE_OCC \
rgrover1 980:07ce7d9ed5ff 1625 HAVE_GETTIMEOFDAY
rgrover1 980:07ce7d9ed5ff 1626
rgrover1 980:07ce7d9ed5ff 1627 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
rgrover1 980:07ce7d9ed5ff 1628 # this tag can be used to specify a list of macro names that should be expanded.
rgrover1 980:07ce7d9ed5ff 1629 # The macro definition that is found in the sources will be used.
rgrover1 980:07ce7d9ed5ff 1630 # Use the PREDEFINED tag if you want to use a different macro definition that
rgrover1 980:07ce7d9ed5ff 1631 # overrules the definition found in the source code.
rgrover1 980:07ce7d9ed5ff 1632
rgrover1 980:07ce7d9ed5ff 1633 EXPAND_AS_DEFINED =
rgrover1 980:07ce7d9ed5ff 1634
rgrover1 980:07ce7d9ed5ff 1635 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
rgrover1 980:07ce7d9ed5ff 1636 # doxygen's preprocessor will remove all references to function-like macros
rgrover1 980:07ce7d9ed5ff 1637 # that are alone on a line, have an all uppercase name, and do not end with a
rgrover1 980:07ce7d9ed5ff 1638 # semicolon, because these will confuse the parser if not removed.
rgrover1 980:07ce7d9ed5ff 1639
rgrover1 980:07ce7d9ed5ff 1640 SKIP_FUNCTION_MACROS = YES
rgrover1 980:07ce7d9ed5ff 1641
rgrover1 980:07ce7d9ed5ff 1642 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1643 # Configuration::additions related to external references
rgrover1 980:07ce7d9ed5ff 1644 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1645
rgrover1 980:07ce7d9ed5ff 1646 # The TAGFILES option can be used to specify one or more tagfiles. For each
rgrover1 980:07ce7d9ed5ff 1647 # tag file the location of the external documentation should be added. The
rgrover1 980:07ce7d9ed5ff 1648 # format of a tag file without this location is as follows:
rgrover1 980:07ce7d9ed5ff 1649 #
rgrover1 980:07ce7d9ed5ff 1650 # TAGFILES = file1 file2 ...
rgrover1 980:07ce7d9ed5ff 1651 # Adding location for the tag files is done as follows:
rgrover1 980:07ce7d9ed5ff 1652 #
rgrover1 980:07ce7d9ed5ff 1653 # TAGFILES = file1=loc1 "file2 = loc2" ...
rgrover1 980:07ce7d9ed5ff 1654 # where "loc1" and "loc2" can be relative or absolute paths
rgrover1 980:07ce7d9ed5ff 1655 # or URLs. Note that each tag file must have a unique name (where the name does
rgrover1 980:07ce7d9ed5ff 1656 # NOT include the path). If a tag file is not located in the directory in which
rgrover1 980:07ce7d9ed5ff 1657 # doxygen is run, you must also specify the path to the tagfile here.
rgrover1 980:07ce7d9ed5ff 1658
rgrover1 980:07ce7d9ed5ff 1659 TAGFILES =
rgrover1 980:07ce7d9ed5ff 1660
rgrover1 980:07ce7d9ed5ff 1661 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
rgrover1 980:07ce7d9ed5ff 1662 # a tag file that is based on the input files it reads.
rgrover1 980:07ce7d9ed5ff 1663
rgrover1 980:07ce7d9ed5ff 1664 GENERATE_TAGFILE =
rgrover1 980:07ce7d9ed5ff 1665
rgrover1 980:07ce7d9ed5ff 1666 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
rgrover1 980:07ce7d9ed5ff 1667 # in the class index. If set to NO only the inherited external classes
rgrover1 980:07ce7d9ed5ff 1668 # will be listed.
rgrover1 980:07ce7d9ed5ff 1669
rgrover1 980:07ce7d9ed5ff 1670 ALLEXTERNALS = NO
rgrover1 980:07ce7d9ed5ff 1671
rgrover1 980:07ce7d9ed5ff 1672 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
rgrover1 980:07ce7d9ed5ff 1673 # in the modules index. If set to NO, only the current project's groups will
rgrover1 980:07ce7d9ed5ff 1674 # be listed.
rgrover1 980:07ce7d9ed5ff 1675
rgrover1 980:07ce7d9ed5ff 1676 EXTERNAL_GROUPS = YES
rgrover1 980:07ce7d9ed5ff 1677
rgrover1 980:07ce7d9ed5ff 1678 # If the EXTERNAL_PAGES tag is set to YES all external pages will be listed
rgrover1 980:07ce7d9ed5ff 1679 # in the related pages index. If set to NO, only the current project's
rgrover1 980:07ce7d9ed5ff 1680 # pages will be listed.
rgrover1 980:07ce7d9ed5ff 1681
rgrover1 980:07ce7d9ed5ff 1682 EXTERNAL_PAGES = YES
rgrover1 980:07ce7d9ed5ff 1683
rgrover1 980:07ce7d9ed5ff 1684 # The PERL_PATH should be the absolute path and name of the perl script
rgrover1 980:07ce7d9ed5ff 1685 # interpreter (i.e. the result of `which perl').
rgrover1 980:07ce7d9ed5ff 1686
rgrover1 980:07ce7d9ed5ff 1687 PERL_PATH = /usr/bin/perl
rgrover1 980:07ce7d9ed5ff 1688
rgrover1 980:07ce7d9ed5ff 1689 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1690 # Configuration options related to the dot tool
rgrover1 980:07ce7d9ed5ff 1691 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1692
rgrover1 980:07ce7d9ed5ff 1693 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 1694 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
rgrover1 980:07ce7d9ed5ff 1695 # or super classes. Setting the tag to NO turns the diagrams off. Note that
rgrover1 980:07ce7d9ed5ff 1696 # this option also works with HAVE_DOT disabled, but it is recommended to
rgrover1 980:07ce7d9ed5ff 1697 # install and use dot, since it yields more powerful graphs.
rgrover1 980:07ce7d9ed5ff 1698
rgrover1 980:07ce7d9ed5ff 1699 CLASS_DIAGRAMS = NO
rgrover1 980:07ce7d9ed5ff 1700
rgrover1 980:07ce7d9ed5ff 1701 # You can define message sequence charts within doxygen comments using the \msc
rgrover1 980:07ce7d9ed5ff 1702 # command. Doxygen will then run the mscgen tool (see
rgrover1 980:07ce7d9ed5ff 1703 # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
rgrover1 980:07ce7d9ed5ff 1704 # documentation. The MSCGEN_PATH tag allows you to specify the directory where
rgrover1 980:07ce7d9ed5ff 1705 # the mscgen tool resides. If left empty the tool is assumed to be found in the
rgrover1 980:07ce7d9ed5ff 1706 # default search path.
rgrover1 980:07ce7d9ed5ff 1707
rgrover1 980:07ce7d9ed5ff 1708 MSCGEN_PATH =
rgrover1 980:07ce7d9ed5ff 1709
rgrover1 980:07ce7d9ed5ff 1710 # If set to YES, the inheritance and collaboration graphs will hide
rgrover1 980:07ce7d9ed5ff 1711 # inheritance and usage relations if the target is undocumented
rgrover1 980:07ce7d9ed5ff 1712 # or is not a class.
rgrover1 980:07ce7d9ed5ff 1713
rgrover1 980:07ce7d9ed5ff 1714 HIDE_UNDOC_RELATIONS = YES
rgrover1 980:07ce7d9ed5ff 1715
rgrover1 980:07ce7d9ed5ff 1716 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
rgrover1 980:07ce7d9ed5ff 1717 # available from the path. This tool is part of Graphviz, a graph visualization
rgrover1 980:07ce7d9ed5ff 1718 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
rgrover1 980:07ce7d9ed5ff 1719 # have no effect if this option is set to NO (the default)
rgrover1 980:07ce7d9ed5ff 1720
rgrover1 980:07ce7d9ed5ff 1721 HAVE_DOT = YES
rgrover1 980:07ce7d9ed5ff 1722
rgrover1 980:07ce7d9ed5ff 1723 # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
rgrover1 980:07ce7d9ed5ff 1724 # allowed to run in parallel. When set to 0 (the default) doxygen will
rgrover1 980:07ce7d9ed5ff 1725 # base this on the number of processors available in the system. You can set it
rgrover1 980:07ce7d9ed5ff 1726 # explicitly to a value larger than 0 to get control over the balance
rgrover1 980:07ce7d9ed5ff 1727 # between CPU load and processing speed.
rgrover1 980:07ce7d9ed5ff 1728
rgrover1 980:07ce7d9ed5ff 1729 DOT_NUM_THREADS = 0
rgrover1 980:07ce7d9ed5ff 1730
rgrover1 980:07ce7d9ed5ff 1731 # By default doxygen will use the Helvetica font for all dot files that
rgrover1 980:07ce7d9ed5ff 1732 # doxygen generates. When you want a differently looking font you can specify
rgrover1 980:07ce7d9ed5ff 1733 # the font name using DOT_FONTNAME. You need to make sure dot is able to find
rgrover1 980:07ce7d9ed5ff 1734 # the font, which can be done by putting it in a standard location or by setting
rgrover1 980:07ce7d9ed5ff 1735 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
rgrover1 980:07ce7d9ed5ff 1736 # directory containing the font.
rgrover1 980:07ce7d9ed5ff 1737
rgrover1 980:07ce7d9ed5ff 1738 DOT_FONTNAME = Helvetica
rgrover1 980:07ce7d9ed5ff 1739
rgrover1 980:07ce7d9ed5ff 1740 # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
rgrover1 980:07ce7d9ed5ff 1741 # The default size is 10pt.
rgrover1 980:07ce7d9ed5ff 1742
rgrover1 980:07ce7d9ed5ff 1743 DOT_FONTSIZE = 10
rgrover1 980:07ce7d9ed5ff 1744
rgrover1 980:07ce7d9ed5ff 1745 # By default doxygen will tell dot to use the Helvetica font.
rgrover1 980:07ce7d9ed5ff 1746 # If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
rgrover1 980:07ce7d9ed5ff 1747 # set the path where dot can find it.
rgrover1 980:07ce7d9ed5ff 1748
rgrover1 980:07ce7d9ed5ff 1749 DOT_FONTPATH =
rgrover1 980:07ce7d9ed5ff 1750
rgrover1 980:07ce7d9ed5ff 1751 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
rgrover1 980:07ce7d9ed5ff 1752 # will generate a graph for each documented class showing the direct and
rgrover1 980:07ce7d9ed5ff 1753 # indirect inheritance relations. Setting this tag to YES will force the
rgrover1 980:07ce7d9ed5ff 1754 # CLASS_DIAGRAMS tag to NO.
rgrover1 980:07ce7d9ed5ff 1755
rgrover1 980:07ce7d9ed5ff 1756 CLASS_GRAPH = YES
rgrover1 980:07ce7d9ed5ff 1757
rgrover1 980:07ce7d9ed5ff 1758 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
rgrover1 980:07ce7d9ed5ff 1759 # will generate a graph for each documented class showing the direct and
rgrover1 980:07ce7d9ed5ff 1760 # indirect implementation dependencies (inheritance, containment, and
rgrover1 980:07ce7d9ed5ff 1761 # class references variables) of the class with other documented classes.
rgrover1 980:07ce7d9ed5ff 1762
rgrover1 980:07ce7d9ed5ff 1763 COLLABORATION_GRAPH = YES
rgrover1 980:07ce7d9ed5ff 1764
rgrover1 980:07ce7d9ed5ff 1765 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
rgrover1 980:07ce7d9ed5ff 1766 # will generate a graph for groups, showing the direct groups dependencies
rgrover1 980:07ce7d9ed5ff 1767
rgrover1 980:07ce7d9ed5ff 1768 GROUP_GRAPHS = YES
rgrover1 980:07ce7d9ed5ff 1769
rgrover1 980:07ce7d9ed5ff 1770 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
rgrover1 980:07ce7d9ed5ff 1771 # collaboration diagrams in a style similar to the OMG's Unified Modeling
rgrover1 980:07ce7d9ed5ff 1772 # Language.
rgrover1 980:07ce7d9ed5ff 1773
rgrover1 980:07ce7d9ed5ff 1774 UML_LOOK = NO
rgrover1 980:07ce7d9ed5ff 1775
rgrover1 980:07ce7d9ed5ff 1776 # If the UML_LOOK tag is enabled, the fields and methods are shown inside
rgrover1 980:07ce7d9ed5ff 1777 # the class node. If there are many fields or methods and many nodes the
rgrover1 980:07ce7d9ed5ff 1778 # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
rgrover1 980:07ce7d9ed5ff 1779 # threshold limits the number of items for each type to make the size more
rgrover1 980:07ce7d9ed5ff 1780 # manageable. Set this to 0 for no limit. Note that the threshold may be
rgrover1 980:07ce7d9ed5ff 1781 # exceeded by 50% before the limit is enforced.
rgrover1 980:07ce7d9ed5ff 1782
rgrover1 980:07ce7d9ed5ff 1783 UML_LIMIT_NUM_FIELDS = 10
rgrover1 980:07ce7d9ed5ff 1784
rgrover1 980:07ce7d9ed5ff 1785 # If set to YES, the inheritance and collaboration graphs will show the
rgrover1 980:07ce7d9ed5ff 1786 # relations between templates and their instances.
rgrover1 980:07ce7d9ed5ff 1787
rgrover1 980:07ce7d9ed5ff 1788 TEMPLATE_RELATIONS = NO
rgrover1 980:07ce7d9ed5ff 1789
rgrover1 980:07ce7d9ed5ff 1790 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
rgrover1 980:07ce7d9ed5ff 1791 # tags are set to YES then doxygen will generate a graph for each documented
rgrover1 980:07ce7d9ed5ff 1792 # file showing the direct and indirect include dependencies of the file with
rgrover1 980:07ce7d9ed5ff 1793 # other documented files.
rgrover1 980:07ce7d9ed5ff 1794
rgrover1 980:07ce7d9ed5ff 1795 INCLUDE_GRAPH = YES
rgrover1 980:07ce7d9ed5ff 1796
rgrover1 980:07ce7d9ed5ff 1797 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
rgrover1 980:07ce7d9ed5ff 1798 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
rgrover1 980:07ce7d9ed5ff 1799 # documented header file showing the documented files that directly or
rgrover1 980:07ce7d9ed5ff 1800 # indirectly include this file.
rgrover1 980:07ce7d9ed5ff 1801
rgrover1 980:07ce7d9ed5ff 1802 INCLUDED_BY_GRAPH = YES
rgrover1 980:07ce7d9ed5ff 1803
rgrover1 980:07ce7d9ed5ff 1804 # If the CALL_GRAPH and HAVE_DOT options are set to YES then
rgrover1 980:07ce7d9ed5ff 1805 # doxygen will generate a call dependency graph for every global function
rgrover1 980:07ce7d9ed5ff 1806 # or class method. Note that enabling this option will significantly increase
rgrover1 980:07ce7d9ed5ff 1807 # the time of a run. So in most cases it will be better to enable call graphs
rgrover1 980:07ce7d9ed5ff 1808 # for selected functions only using the \callgraph command.
rgrover1 980:07ce7d9ed5ff 1809
rgrover1 980:07ce7d9ed5ff 1810 CALL_GRAPH = NO
rgrover1 980:07ce7d9ed5ff 1811
rgrover1 980:07ce7d9ed5ff 1812 # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
rgrover1 980:07ce7d9ed5ff 1813 # doxygen will generate a caller dependency graph for every global function
rgrover1 980:07ce7d9ed5ff 1814 # or class method. Note that enabling this option will significantly increase
rgrover1 980:07ce7d9ed5ff 1815 # the time of a run. So in most cases it will be better to enable caller
rgrover1 980:07ce7d9ed5ff 1816 # graphs for selected functions only using the \callergraph command.
rgrover1 980:07ce7d9ed5ff 1817
rgrover1 980:07ce7d9ed5ff 1818 CALLER_GRAPH = NO
rgrover1 980:07ce7d9ed5ff 1819
rgrover1 980:07ce7d9ed5ff 1820 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
rgrover1 980:07ce7d9ed5ff 1821 # will generate a graphical hierarchy of all classes instead of a textual one.
rgrover1 980:07ce7d9ed5ff 1822
rgrover1 980:07ce7d9ed5ff 1823 GRAPHICAL_HIERARCHY = YES
rgrover1 980:07ce7d9ed5ff 1824
rgrover1 980:07ce7d9ed5ff 1825 # If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
rgrover1 980:07ce7d9ed5ff 1826 # then doxygen will show the dependencies a directory has on other directories
rgrover1 980:07ce7d9ed5ff 1827 # in a graphical way. The dependency relations are determined by the #include
rgrover1 980:07ce7d9ed5ff 1828 # relations between the files in the directories.
rgrover1 980:07ce7d9ed5ff 1829
rgrover1 980:07ce7d9ed5ff 1830 DIRECTORY_GRAPH = YES
rgrover1 980:07ce7d9ed5ff 1831
rgrover1 980:07ce7d9ed5ff 1832 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
rgrover1 980:07ce7d9ed5ff 1833 # generated by dot. Possible values are svg, png, jpg, or gif.
rgrover1 980:07ce7d9ed5ff 1834 # If left blank png will be used. If you choose svg you need to set
rgrover1 980:07ce7d9ed5ff 1835 # HTML_FILE_EXTENSION to xhtml in order to make the SVG files
rgrover1 980:07ce7d9ed5ff 1836 # visible in IE 9+ (other browsers do not have this requirement).
rgrover1 980:07ce7d9ed5ff 1837
rgrover1 980:07ce7d9ed5ff 1838 DOT_IMAGE_FORMAT = png
rgrover1 980:07ce7d9ed5ff 1839
rgrover1 980:07ce7d9ed5ff 1840 # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
rgrover1 980:07ce7d9ed5ff 1841 # enable generation of interactive SVG images that allow zooming and panning.
rgrover1 980:07ce7d9ed5ff 1842 # Note that this requires a modern browser other than Internet Explorer.
rgrover1 980:07ce7d9ed5ff 1843 # Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
rgrover1 980:07ce7d9ed5ff 1844 # need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
rgrover1 980:07ce7d9ed5ff 1845 # visible. Older versions of IE do not have SVG support.
rgrover1 980:07ce7d9ed5ff 1846
rgrover1 980:07ce7d9ed5ff 1847 INTERACTIVE_SVG = NO
rgrover1 980:07ce7d9ed5ff 1848
rgrover1 980:07ce7d9ed5ff 1849 # The tag DOT_PATH can be used to specify the path where the dot tool can be
rgrover1 980:07ce7d9ed5ff 1850 # found. If left blank, it is assumed the dot tool can be found in the path.
rgrover1 980:07ce7d9ed5ff 1851
rgrover1 980:07ce7d9ed5ff 1852 DOT_PATH =
rgrover1 980:07ce7d9ed5ff 1853
rgrover1 980:07ce7d9ed5ff 1854 # The DOTFILE_DIRS tag can be used to specify one or more directories that
rgrover1 980:07ce7d9ed5ff 1855 # contain dot files that are included in the documentation (see the
rgrover1 980:07ce7d9ed5ff 1856 # \dotfile command).
rgrover1 980:07ce7d9ed5ff 1857
rgrover1 980:07ce7d9ed5ff 1858 DOTFILE_DIRS =
rgrover1 980:07ce7d9ed5ff 1859
rgrover1 980:07ce7d9ed5ff 1860 # The MSCFILE_DIRS tag can be used to specify one or more directories that
rgrover1 980:07ce7d9ed5ff 1861 # contain msc files that are included in the documentation (see the
rgrover1 980:07ce7d9ed5ff 1862 # \mscfile command).
rgrover1 980:07ce7d9ed5ff 1863
rgrover1 980:07ce7d9ed5ff 1864 MSCFILE_DIRS =
rgrover1 980:07ce7d9ed5ff 1865
rgrover1 980:07ce7d9ed5ff 1866 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
rgrover1 980:07ce7d9ed5ff 1867 # nodes that will be shown in the graph. If the number of nodes in a graph
rgrover1 980:07ce7d9ed5ff 1868 # becomes larger than this value, doxygen will truncate the graph, which is
rgrover1 980:07ce7d9ed5ff 1869 # visualized by representing a node as a red box. Note that doxygen if the
rgrover1 980:07ce7d9ed5ff 1870 # number of direct children of the root node in a graph is already larger than
rgrover1 980:07ce7d9ed5ff 1871 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
rgrover1 980:07ce7d9ed5ff 1872 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
rgrover1 980:07ce7d9ed5ff 1873
rgrover1 980:07ce7d9ed5ff 1874 DOT_GRAPH_MAX_NODES = 200
rgrover1 980:07ce7d9ed5ff 1875
rgrover1 980:07ce7d9ed5ff 1876 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
rgrover1 980:07ce7d9ed5ff 1877 # graphs generated by dot. A depth value of 3 means that only nodes reachable
rgrover1 980:07ce7d9ed5ff 1878 # from the root by following a path via at most 3 edges will be shown. Nodes
rgrover1 980:07ce7d9ed5ff 1879 # that lay further from the root node will be omitted. Note that setting this
rgrover1 980:07ce7d9ed5ff 1880 # option to 1 or 2 may greatly reduce the computation time needed for large
rgrover1 980:07ce7d9ed5ff 1881 # code bases. Also note that the size of a graph can be further restricted by
rgrover1 980:07ce7d9ed5ff 1882 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
rgrover1 980:07ce7d9ed5ff 1883
rgrover1 980:07ce7d9ed5ff 1884 MAX_DOT_GRAPH_DEPTH = 1000
rgrover1 980:07ce7d9ed5ff 1885
rgrover1 980:07ce7d9ed5ff 1886 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
rgrover1 980:07ce7d9ed5ff 1887 # background. This is disabled by default, because dot on Windows does not
rgrover1 980:07ce7d9ed5ff 1888 # seem to support this out of the box. Warning: Depending on the platform used,
rgrover1 980:07ce7d9ed5ff 1889 # enabling this option may lead to badly anti-aliased labels on the edges of
rgrover1 980:07ce7d9ed5ff 1890 # a graph (i.e. they become hard to read).
rgrover1 980:07ce7d9ed5ff 1891
rgrover1 980:07ce7d9ed5ff 1892 DOT_TRANSPARENT = YES
rgrover1 980:07ce7d9ed5ff 1893
rgrover1 980:07ce7d9ed5ff 1894 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
rgrover1 980:07ce7d9ed5ff 1895 # files in one run (i.e. multiple -o and -T options on the command line). This
rgrover1 980:07ce7d9ed5ff 1896 # makes dot run faster, but since only newer versions of dot (>1.8.10)
rgrover1 980:07ce7d9ed5ff 1897 # support this, this feature is disabled by default.
rgrover1 980:07ce7d9ed5ff 1898
rgrover1 980:07ce7d9ed5ff 1899 DOT_MULTI_TARGETS = NO
rgrover1 980:07ce7d9ed5ff 1900
rgrover1 980:07ce7d9ed5ff 1901 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 1902 # generate a legend page explaining the meaning of the various boxes and
rgrover1 980:07ce7d9ed5ff 1903 # arrows in the dot generated graphs.
rgrover1 980:07ce7d9ed5ff 1904
rgrover1 980:07ce7d9ed5ff 1905 GENERATE_LEGEND = YES
rgrover1 980:07ce7d9ed5ff 1906
rgrover1 980:07ce7d9ed5ff 1907 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 1908 # remove the intermediate dot files that are used to generate
rgrover1 980:07ce7d9ed5ff 1909 # the various graphs.
rgrover1 980:07ce7d9ed5ff 1910
rgrover1 980:07ce7d9ed5ff 1911 DOT_CLEANUP = YES