set32l010 oled
Dependents: oled_test8_16x24_010_1
Diff: SSD1308.h
- Revision:
- 0:e65e15783b26
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/SSD1308.h Fri Aug 05 10:30:55 2022 +0000 @@ -0,0 +1,379 @@ +/** @file SSD1308 I2C device class header file + * Based on Solomon Systech SSD1308 datasheet, rev. 1, 10/2008 + * The SSD1308 is used for example in the Seeed 128x64 OLED Display + * http://www.seeedstudio.com/depot/grove-oled-display-12864-p-781.html?cPath=163_167 + */ +// The original code by Andrew Schamp is using (and has been submitted as a part of) Jeff Rowberg's I2Cdevlib library, +// which should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib +// Some parts also mashed up from Graphic Library for driving monochrome displays based on the PCD8544, +// Copyright (c) 2011, Wim De Roeve, who in turn did partial port of code found on +// http://serdisplib.sourceforge.net/ser/pcd8544.html#links and by Petras Saduikis <petras@petras.co.uk> +// +// Changelog: +// 2011-08-25 - Initial release by Andrew Schamp <schamp@gmail.com> +// 2012-06-19 - Ported to mbed and optimised (WH) +// 2013-07-12 - Minor comment fix and placeholder for SSD1306 (WH) +// 2015-01-01 - Switch for optimised I2C calls to test on F401 (WH) +// 2017-12-18 - Fixed non-copyable issue (Thx kenjiArai) +// +/* +================================================================================ +I2Cdev device library code is placed under the MIT license +Copyright (c) 2011 Andrew Schamp +Copyright (c) 2012,2013,2017 WH (mbed port) + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. +================================================================================ +*/ + +#ifndef SSD1308_H +#define SSD1308_H + +// This is the I2C address (8 bit) +// There are two possible addresses: with D/C# (pin 13) grounded, the address is 0x78, +// with D/C# tied high it is 0x7A. Assume grounded by default. +#define SSD1308_SA0 0x78 +#define SSD1308_SA1 0x7A +#define SSD1308_DEF_SA SSD1308_SA0 + +// Display dimensions +#define ROWS 64 +#define COLUMNS 128 +#define PAGES (ROWS / 8) +#define MAX_PAGE (PAGES - 1) +#define MAX_ROW (ROWS - 1) +#define MAX_COL (COLUMNS - 1) + +// Character dimensions 8x8 font +#define CHARS (COLUMNS / FONT8x8_WIDTH) + +// Command and Datamode +#define COMMAND_MODE 0x80 // continuation bit is set! +#define DATA_MODE 0x40 + +// Commands and Parameter defines +#define SET_LOWER_COLUMN 0x00 // | with lower nibble (Page mode only) +#define SET_HIGHER_COLUMN 0x10 // | with higher nibble (Page mode only) + +#define HORIZONTAL_ADDRESSING_MODE 0x00 +#define VERTICAL_ADDRESSING_MODE 0x01 +#define PAGE_ADDRESSING_MODE 0x02 +#define SET_MEMORY_ADDRESSING_MODE 0x20 // takes one byte as given above + +#define SET_COLUMN_ADDRESS 0x21 // takes two bytes, start address and end address of display data RAM +#define SET_PAGE_ADDRESS 0x22 // takes two bytes, start address and end address of display data RAM + +// Command maybe unsupported by SSD1308 +#define FADE_INTERVAL_8_FRAMES 0x00 +#define FADE_INTERVAL_16_FRAMES 0x01 +#define FADE_INTERVAL_24_FRAMES 0x02 +#define FADE_INTERVAL_32_FRAMES 0x03 +#define FADE_INTERVAL_64_FRAMES 0x07 +#define FADE_INTERVAL_128_FRAMES 0x0F +#define FADE_BLINK_DISABLE 0x00 +#define FADE_OUT_ENABLE 0x20 +#define BLINK_ENABLE 0x30 +#define SET_FADE_BLINK 0x23 // takes one byte + // bit5-4 = 0, fade/blink mode + // bit3-0 = Time interval in frames + +#define SET_DISPLAY_START_LINE 0x40 // | with a row number 0-63 to set start row. (Reset = 0) + +#define SET_CONTRAST 0x81 // takes one byte, 0x00 - 0xFF + +#define SET_SEGMENT_REMAP_0 0xA0 // column address 0 is mapped to SEG0 (Reset) +#define SET_SEGMENT_REMAP_127 0xA1 // column address 127 is mapped to SEG0 + +#define SET_DISPLAY_GDDRAM 0xA4 // restores display to contents of RAM +#define SET_ENTIRE_DISPLAY_ON 0xA5 // turns all pixels on, does not affect RAM + +#define SET_NORMAL_DISPLAY 0xA6 // a databit of 1 indicates pixel 'ON' +#define SET_INVERSE_DISPLAY 0xA7 // a databit of 1 indicates pixel 'OFF' + +#define SET_MULTIPLEX_RATIO 0xA8 // takes one byte, from 16xMUX to 64xMUX (MUX Ratio = byte+1; Default 64) + +#define EXTERNAL_IREF 0x10 +#define INTERNAL_IREF 0x00 +#define SET_IREF_SELECTION 0xAD // sets internal or external Iref + +#define SET_DISPLAY_POWER_OFF 0xAE +#define SET_DISPLAY_POWER_ON 0xAF + +#define PAGE0 0x00 +#define PAGE1 0x01 +#define PAGE2 0x02 +#define PAGE3 0x03 +#define PAGE4 0x04 +#define PAGE5 0x05 +#define PAGE6 0x06 +#define PAGE7 0x07 +#define SET_PAGE_START_ADDRESS 0xB0 // | with a page number to get start address (Page mode only) + +#define SET_COMMON_REMAP_0 0xC0 // row address 0 is mapped to COM0 (Reset) +#define SET_COMMON_REMAP_63 0xC8 // row address 63 is mapped to COM0 + +#define SET_DISPLAY_OFFSET 0xD3 // takes one byte from 0-63 for vertical shift, Reset = 0 + +#define SET_DISPLAY_CLOCK 0xD5 // takes one byte + // bit7-4 = Osc Freq DCLK (Reset = 1000b) + // bit3-0 = Divide ration (Reset = oooob, Ratio = 1) + +#define SET_PRECHARGE_TIME 0xD9 // takes one byte + // bit7-4 = Phase2, upto 15 DCLKs (Reset = 0010b) + // bit3-0 = Phase1, upto 15 DCLKs (Reset = 0010b) + + +#define COMMON_BASE 0x02 // +#define COMMON_SEQUENTIAL 0x00 // Sequential common pins config +#define COMMON_ALTERNATIVE 0x10 // Odd/Even common pins config (Reset) +#define COMMON_LEFTRIGHT_NORMAL 0x00 // LeftRight Normal (Reset) +#define COMMON_LEFTRIGHT_FLIP 0x20 // LeftRight Flip +#define SET_COMMON_CONF 0xDA // takes one byte as given above + + +#define VCOMH_DESELECT_0_65_CODE 0x00 +#define VCOMH_DESELECT_0_77_CODE 0x20 +#define VCOMH_DESELECT_0_83_CODE 0x30 +#define SET_VCOMH_DESELECT_LEVEL 0xDB // takes one byte as given above + +#define NOP 0xE3 + +#define SCROLL_INTERVAL_5_FRAMES 0x00 +#define SCROLL_INTERVAL_64_FRAMES 0x01 +#define SCROLL_INTERVAL_128_FRAMES 0x02 +#define SCROLL_INTERVAL_256_FRAMES 0x03 +#define SCROLL_INTERVAL_3_FRAMES 0x04 +#define SCROLL_INTERVAL_4_FRAMES 0x05 +#define SCROLL_INTERVAL_25_FRAMES 0x06 +#define SCROLL_INTERVAL_2_FRAMES 0x07 + +#define SET_RIGHT_HOR_SCROLL 0x26 // takes 6 bytes: 0x00, PageStart, Scroll_Interval, PageEnd, 0x00, 0xFF +#define SET_LEFT_HOR_SCROLL 0x27 // takes 6 bytes: 0x00, PageStart, Scroll_Interval, PageEnd, 0x00, 0xFF + +#define SET_VERT_RIGHT_HOR_SCROLL 0x29 // takes 5 bytes: 0x00, PageStart, Scroll_Interval, PageEnd, VertOffset +#define SET_VERT_LEFT_HOR_SCROLL 0x2A // takes 5 bytes: 0x00, PageStart, Scroll_Interval, PageEnd, VertOffset + +#define SET_DEACTIVATE_SCROLL 0x2E +#define SET_ACTIVATE_SCROLL 0x2F + +#define SET_VERTICAL_SCROLL_AREA 0xA3 // takes 2 bytes: Rows in Top Area (Reset=0), Rows in Scroll Area (Reset=64) + + + +/** Class to control an SSD1308 based oled Display + * + * Example: + * @code + * #include "mbed.h" + * #include "mbed_logo.h" + * #include "SSD1308.h" + + * //Pin Defines for I2C Bus + * #define D_SDA p28 + * #define D_SCL p27 + * I2C i2c(D_SDA, D_SCL); + * + * // Host PC Communication channels + * Serial pc(USBTX, USBRX); // tx, rx + * + * // Instantiate OLED + * SSD1308 oled = SSD1308(&i2c, SSD1308_SA0); + * + * int main() { + * pc.printf("OLED test start\r"); + * oled.writeString(0, 0, "Hello World !"); + * // oled.printf("Hello World !"); + * + * oled.fillDisplay(0xAA); + * oled.setDisplayOff(); + * wait(1); + * oled.setDisplayOn(); + * + * oled.clearDisplay(); + * oled.setDisplayInverse(); + * wait(0.5); + * oled.setDisplayNormal(); + * + * oled.writeBitmap((uint8_t*) mbed_logo); + * + * pc.printf("OLED test done\r\n"); + * } + * + * @endcode + */ +//class SSD1308 : public Stream { +struct SSD1308 { + + +// public: + +/** + *@brief Constructor + *@param I2C &i2c reference to i2c, + *@param uint8_t deviceAddress slaveaddress (8bit to use for the controller (0x78 by default, assumes D/C# (pin 13) grounded) + */ + SSD1308( I2C *_i2c , uint8_t address = SSD1308_DEF_SA); + +// High Level methods + +/** @brief High level Init, most settings remain at Power-On reset value + */ + void initialize(); + +/** @brief clear the display +*/ + void clearDisplay(); + + +/** @brief fill the display + * @param uint8_t pattern fillpattern vertical patch or 8 bits + * @param uint8_t start_page begin page (0..MAX_PAGE) + * @param uint8_t end_page end page (start_page..MAX_PAGE) + * @param uint8_t start_col begin column (0..MAX_COL) + * @param uint8_t end_col end column (start_col..MAX_COL) +*/ + void fillDisplay(uint8_t pattern = 0x00, + uint8_t start_page=0, uint8_t end_page=MAX_PAGE, + uint8_t start_col=0, uint8_t end_col=MAX_COL); + + +/** @brief write a bitmap to the display + * @param uint8_t* data pointer to bitmap + * @param uint8_t start_page begin page (0..MAX_PAGE) + * @param uint8_t end_page end page (start_page..MAX_PAGE) + * @param uint8_t start_col begin column (0..MAX_COL) + * @param uint8_t end_col end column (start_col..MAX_COL) +*/ + void writeBitmap(uint8_t* data, + uint8_t start_page=0, uint8_t end_page=MAX_PAGE, + uint8_t start_col=0, uint8_t end_col=MAX_COL); + + // Select inverted or normal text + //void setInverted(bool inverted) { _inverted = inverted; }; + + +/** @brief Write large character (16x24 font) + * @param uint8_t row row number (0...MAX_ROW) + * @param uint8_t col column number (0...MAX_COL) + * @param char chr Used for displaying numbers 0 - 9 and '+', '-', '.' + */ + void writeBigChar(uint8_t row, uint8_t col, char chr); + + + + + +// Medium Level methods + +/** @brief Set Horizontal Addressing Mode (cursor incr left-to-right, top-to-bottom) + * + */ + void setHorizontalAddressingMode(); + +/** @brief Set Page Addressing Mode (cursor incr left-to-right) + * + */ + void setPageAddressingMode(); + +/** @brief Set Addressing Mode + * @param uint8_t mode + */ + void setMemoryAddressingMode(uint8_t mode); + + +/** @param uint8_t start startcolumn (valid range 0..MAX_COL) + * @param uint8_t end endcolumn (valid range start..MAX_COL) + */ + void setColumnAddress(uint8_t start, uint8_t end); + +/** @param uint8_t start startpage (valid range 0..MAX_PAGE) + * @param uint8_t end endpage (valid range start..MAX_PAGE) + */ + void setPageAddress(uint8_t start, uint8_t end); + + +/** @brief Enable Display +*/ + void setDisplayOn(); + +/** @brief Disable Display +*/ + void setDisplayOff(); + +/** @brief Display Flip (Left/Right, Up/Down) + * @param bool left flip Left/Right + * @param bool down flip Up/Down + */ + void setDisplayFlip(bool left, bool down); + + + + +// private: + + +// Low Level methods + +/** @brief Write command that has no parameters +*/ + void _sendCommand(uint8_t command); + +/** @brief Write command that has one parameter +*/ + void _sendCommand(uint8_t command, uint8_t param1); + +/** @brief Write command that has two parameters +*/ + void _sendCommand(uint8_t command, uint8_t param1, uint8_t param2); +// void sendCommands(uint8_t len, uint8_t* buf); + +/** @brief Write command that has five parameters +*/ + void _sendCommand(uint8_t command, uint8_t param1, uint8_t param2, + uint8_t param3, uint8_t param4, + uint8_t param5); + +/** @brief Write command that has six parameters +*/ + void _sendCommand(uint8_t command, uint8_t param1, uint8_t param2, + uint8_t param3, uint8_t param4, + uint8_t param5, uint8_t param6); + +/** @brief Write databyte to display + * @brief Start at current cursor location + * @param uint8_t data databyte to write +*/ + void _sendData(uint8_t data); + +/** @brief Write len bytes from buffer data to display, + * @brief Start at current cursor location + * @param uint8_t len number of bytes to write + * @param uint8_t* data pointer to data +*/ + void _sendData(uint8_t len, uint8_t* data); + + + I2C *_i2c; // I2C bus reference + uint8_t _readOpcode; // contains the I2C address of the device + uint8_t _writeOpcode; // contains the I2C address of the device + + //bool _inverted; // inverted or normal text +}; + +#endif