File content as of revision 0:2633b3dba75d:

//HAL_oled_16x24_031_1


#include "mbed.h"
#include "SSD1308.h"


int main() {

    __HAL_RCC_GPIOA_CLK_ENABLE();

    GPIO_InitTypeDef GPIO_InitStruct = {0};

    GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
    GPIO_InitStruct.Pull = GPIO_PULLUP;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
    GPIO_InitStruct.Alternate = GPIO_AF6_I2C2;
    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

    GPIO_InitStruct.Pin = GPIO_PIN_0;
    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);


    __HAL_RCC_I2C2_CLK_ENABLE();

    I2C_HandleTypeDef hi2c2;

    hi2c2.Instance = I2C2;
    hi2c2.Init.Timing = 0x10707DBC;
    hi2c2.Init.OwnAddress1 = 0;
    hi2c2.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
    hi2c2.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
    hi2c2.Init.OwnAddress2 = 0;
    hi2c2.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
    hi2c2.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
    hi2c2.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
    HAL_I2C_Init(&hi2c2);    

    HAL_I2CEx_ConfigAnalogFilter(&hi2c2, I2C_ANALOGFILTER_ENABLE);

    HAL_I2CEx_ConfigDigitalFilter(&hi2c2, 0);


HAL_Delay(200);


    SSD1308 oled = SSD1308( &hi2c2 , SSD1308_SA0);


    //char n1_8[] = "12345678";
    char n1_8[] = "87654321";
    //char n1_8[] =   "88888888";

    int ii=0;
    for(int nn=0; nn<8; nn++) {
        //                y   x
        oled.writeBigChar(0, ii*16,n1_8[nn]);
        ii = ii + 1;
    } //for

    while(1) {

         HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0, GPIO_PIN_SET);
         HAL_Delay(200);

         HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0, GPIO_PIN_RESET);
         HAL_Delay(200);
      
    }//while

}//main