Revision 61:65744bc8ab55, committed 2021-01-08

Comitter:

brunnobbco

Date:

Fri Jan 08 20:16:58 2021 +0000

Parent:

60:c4f9e9202fb4

Commit message:

Lorawan, GPS, Sensors

Changed in this revision

diff -r c4f9e9202fb4 -r 65744bc8ab55 BME280.lib
--- a/BME280.lib	Mon Nov 30 19:25:11 2020 +0000
+++ b/BME280.lib	Fri Jan 08 20:16:58 2021 +0000
@@ -1,1 +1,1 @@
-http://developer.mbed.org/users/MACRUM/code/BME280/#c1f1647004c4
+http://developer.mbed.org/users/MACRUM/code/BME280/#ddcaa259e65b

diff -r c4f9e9202fb4 -r 65744bc8ab55 BME280.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/BME280.txt	Fri Jan 08 20:16:58 2021 +0000
@@ -0,0 +1,189 @@
+#include "mbed.h"
+#define _DEBUG
+
+I2C sensor(p13, p15);
+
+#ifdef _DEBUG
+#define DEBUG_PRINT(...) printf(__VA_ARGS__)
+#else
+#define DEBUG_PRINT(...)
+#endif
+
+const int BME280_ADDR = (0x77 << 1);
+
+uint16_t dig_T1;
+int16_t dig_T2, dig_T3;
+uint16_t dig_P1;
+int16_t dig_P2, dig_P3, dig_P4, dig_P5, dig_P6, dig_P7, dig_P8, dig_P9;
+uint16_t dig_H1, dig_H3;
+int16_t dig_H2, dig_H4, dig_H5, dig_H6;
+int32_t t_fine;
+
+void init()
+{
+    char cmd[18];
+
+    sensor.frequency(1000000);
+
+    cmd[0] = 0xf2; // ctrl_hum
+    cmd[1] = 0x01;
+    sensor.write(BME280_ADDR, cmd, 2);
+
+    cmd[0] = 0xf4; // ctrl_meas
+    cmd[1] = 0x27;
+    sensor.write(BME280_ADDR, cmd, 2);
+
+    cmd[0] = 0xf5; // config
+    cmd[1] = 0xa0;
+    sensor.write(BME280_ADDR, cmd, 2);
+
+    cmd[0] = 0x88; // read dig_T regs
+    sensor.write(BME280_ADDR, cmd, 1);
+    sensor.read(BME280_ADDR, cmd, 6);
+
+    dig_T1 = (cmd[1] << 8) | cmd[0];
+    dig_T2 = (cmd[3] << 8) | cmd[2];
+    dig_T3 = (cmd[5] << 8) | cmd[4];
+
+//   DEBUG_PRINT("dig_T = 0x%x, 0x%x, 0x%x\n", dig_T1, dig_T2, dig_T3);
+
+    cmd[0] = 0x8E; // read dig_P regs
+    sensor.write(BME280_ADDR, cmd, 1);
+    sensor.read(BME280_ADDR, cmd, 18);
+
+    dig_P1 = (cmd[ 1] << 8) | cmd[ 0];
+    dig_P2 = (cmd[ 3] << 8) | cmd[ 2];
+    dig_P3 = (cmd[ 5] << 8) | cmd[ 4];
+    dig_P4 = (cmd[ 7] << 8) | cmd[ 6];
+    dig_P5 = (cmd[ 9] << 8) | cmd[ 8];
+    dig_P6 = (cmd[11] << 8) | cmd[10];
+    dig_P7 = (cmd[13] << 8) | cmd[12];
+    dig_P8 = (cmd[15] << 8) | cmd[14];
+    dig_P9 = (cmd[17] << 8) | cmd[16];
+
+//    DEBUG_PRINT("dig_P = 0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n", dig_P1, dig_P2, dig_P3, dig_P4, dig_P5, dig_P6, dig_P7, dig_P8, dig_P9);
+
+    cmd[0] = 0xA1; // read dig_H regs
+    sensor.write(BME280_ADDR, cmd, 1);
+    sensor.read(BME280_ADDR, cmd, 9);
+
+    dig_H1 = cmd[0];
+    dig_H2 = (cmd[2] << 8) | cmd[1];
+    dig_H3 = cmd[3];
+    dig_H4 = (cmd[4] << 4) | (cmd[5] & 0x0f);
+    dig_H5 = (cmd[7] << 4) | ((cmd[6]>>4) & 0x0f);
+    dig_H6 = cmd[8];
+
+//    DEBUG_PRINT("dig_H = 0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n", dig_H1, dig_H2, dig_H3, dig_H4, dig_H5, dig_H6);
+}
+
+float getTemperature()
+{
+    uint32_t temp_raw;
+    float tempf;
+    char cmd[4];
+
+    cmd[0] = 0xfa; // temp_msb
+    sensor.write(BME280_ADDR, cmd, 1);
+    sensor.read(BME280_ADDR, &cmd[1], 1);
+
+    cmd[0] = 0xfb; // temp_lsb
+    sensor.write(BME280_ADDR, cmd, 1);
+    sensor.read(BME280_ADDR, &cmd[2], 1);
+
+    cmd[0] = 0xfc; // temp_xlsb
+    sensor.write(BME280_ADDR, cmd, 1);
+    sensor.read(BME280_ADDR, &cmd[3], 1);
+
+    temp_raw = (cmd[1] << 12) | (cmd[2] << 4) | (cmd[3] >> 4);
+
+    int32_t temp;
+
+    temp =
+        (((((temp_raw >> 3) - (dig_T1 << 1))) * dig_T2) >> 11) +
+        ((((((temp_raw >> 4) - dig_T1) * ((temp_raw >> 4) - dig_T1)) >> 12) * dig_T3) >> 14);
+
+    t_fine = temp;
+    temp = (temp * 5 + 128) >> 8;
+    tempf = (float)temp;
+
+    return (tempf/100.0f);
+}
+
+float getPressure()
+{
+    uint32_t press_raw;
+    float pressf;
+    char cmd[4];
+
+    cmd[0] = 0xf7; // press_msb
+    sensor.write(BME280_ADDR, cmd, 1);
+    sensor.read(BME280_ADDR, &cmd[1], 1);
+
+    cmd[0] = 0xf8; // press_lsb
+    sensor.write(BME280_ADDR, cmd, 1);
+    sensor.read(BME280_ADDR, &cmd[2], 1);
+
+    cmd[0] = 0xf9; // press_xlsb
+    sensor.write(BME280_ADDR, cmd, 1);
+    sensor.read(BME280_ADDR, &cmd[3], 1);
+
+    press_raw = (cmd[1] << 12) | (cmd[2] << 4) | (cmd[3] >> 4);
+
+    int32_t var1, var2;
+    uint32_t press;
+
+    var1 = (t_fine >> 1) - 64000;
+    var2 = (((var1 >> 2) * (var1 >> 2)) >> 11) * dig_P6;
+    var2 = var2 + ((var1 * dig_P5) << 1);
+    var2 = (var2 >> 2) + (dig_P4 << 16);
+    var1 = (((dig_P3 * (((var1 >> 2)*(var1 >> 2)) >> 13)) >> 3) + ((dig_P2 * var1) >> 1)) >> 18;
+    var1 = ((32768 + var1) * dig_P1) >> 15;
+    if (var1 == 0) {
+        return 0;
+    }
+    press = (((1048576 - press_raw) - (var2 >> 12))) * 3125;
+    if(press < 0x80000000) {
+        press = (press << 1) / var1;
+    } else {
+        press = (press / var1) * 2;
+    }
+    var1 = ((int32_t)dig_P9 * ((int32_t)(((press >> 3) * (press >> 3)) >> 13))) >> 12;
+    var2 = (((int32_t)(press >> 2)) * (int32_t)dig_P8) >> 13;
+    press = (press + ((var1 + var2 + dig_P7) >> 4));
+
+    pressf = (float)press;
+    return (pressf/100.0f);
+}
+
+float getHumidity()
+{
+    uint32_t hum_raw;
+    float humf;
+    char cmd[4];
+
+    cmd[0] = 0xfd; // hum_msb
+    sensor.write(BME280_ADDR, cmd, 1);
+    sensor.read(BME280_ADDR, &cmd[1], 1);
+
+    cmd[0] = 0xfd; // hum_lsb
+    sensor.write(BME280_ADDR, cmd, 1);
+    sensor.read(BME280_ADDR, &cmd[2], 1);
+
+    hum_raw = (cmd[1] << 8) | cmd[2];
+
+    int32_t v_x1;
+
+    v_x1 = t_fine - 76800;
+    v_x1 =  (((((hum_raw << 14) -(((int32_t)dig_H4) << 20) - (((int32_t)dig_H5) * v_x1)) +
+               ((int32_t)16384)) >> 15) * (((((((v_x1 * (int32_t)dig_H6) >> 10) *
+                                            (((v_x1 * ((int32_t)dig_H3)) >> 11) + 32768)) >> 10) + 2097152) *
+                                            (int32_t)dig_H2 + 8192) >> 14));
+    v_x1 = (v_x1 - (((((v_x1 >> 15) * (v_x1 >> 15)) >> 7) * (int32_t)dig_H1) >> 4));
+    v_x1 = (v_x1 < 0 ? 0 : v_x1);
+    v_x1 = (v_x1 > 419430400 ? 419430400 : v_x1);
+
+    humf = (float)(v_x1 >> 12);
+
+    return (humf/1024.0f);
+}

diff -r c4f9e9202fb4 -r 65744bc8ab55 BMX160.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/BMX160.txt	Fri Jan 08 20:16:58 2021 +0000
@@ -0,0 +1,29 @@
+#include "mbed.h"
+ 
+ 
+/* defines the axis for acc */
+#define ACC_NOOF_AXIS       3
+#define GYR_NOOF_AXIS       2
+ 
+/* bmi160 slave address */
+#define BMI160_ADDR         ((0x69)<<1)
+ 
+#define RAD_DEG           57.29577951
+ 
+ 
+I2C i2c(p13, p15);
+ 
+ 
+/* buffer to store acc samples */
+int16_t acc_sample_buffer[ACC_NOOF_AXIS] = {0x5555, 0x5555, 0x5555};
+int16_t gyr_sample_buffer[GYR_NOOF_AXIS] = {0x5555, 0x5555};
+ 
+double acc_result_buffer[ACC_NOOF_AXIS] = {0x5555, 0x5555, 0x5555};
+double gyr_result_buffer[GYR_NOOF_AXIS] = {0x5555, 0x5555};
+ 
+double accel_ang_x, accel_ang_y;
+double tiltx, tilty;
+double tiltx_prev, tilty_prev;
+ 
+char i2c_reg_buffer[2] = {0};
+ 
\ No newline at end of file

diff -r c4f9e9202fb4 -r 65744bc8ab55 SPI_MX25R.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SPI_MX25R.lib	Fri Jan 08 20:16:58 2021 +0000
@@ -0,0 +1,1 @@
+https://os.mbed.com/users/Arkadi/code/SPI_MX25R/#b6bb8d236251

diff -r c4f9e9202fb4 -r 65744bc8ab55 gps.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gps.txt	Fri Jan 08 20:16:58 2021 +0000
@@ -0,0 +1,687 @@
+
+#define  SYNC1       0xB5
+#define  SYNC2       0x62
+
+//GPS DEclaration
+SPI spi_2(P0_5, P0_7, P0_11); // mosi, miso, sclk
+DigitalOut cs(P0_30);
+DigitalOut gps_reset(P1_2);
+DigitalOut gps_int (P0_23);
+DigitalOut gps_DSEL (P0_27);
+
+
+
+
+
+typedef struct
+{
+    uint8_t cls;
+    uint8_t id;
+    uint16_t len;          //Length of the payload. Does not include cls, id, or checksum bytes
+    uint8_t *payload;
+    uint8_t checksumA; //Given to us from module. Checked against the rolling calculated A/B checksums.
+    uint8_t checksumB;
+} gps_ubxPacket;
+
+typedef struct
+{
+    uint32_t iTOW=0;
+    uint16_t year=0;
+    uint8_t month=0;
+    uint8_t day=0;
+    uint8_t hour=0;
+    uint8_t min=0;
+    uint8_t sec=0;
+    int8_t valid=0;
+    uint32_t tAcc=0;
+    int32_t nano=0;
+    uint8_t fixtype=0;
+    int8_t flags=0;
+    int8_t flags2=0;
+    uint8_t numSV=0;
+    int32_t lon=0;
+    int32_t lat=0;
+    int32_t height=0;
+    int32_t hMSL=0;
+    uint32_t hAcc=0;
+    uint32_t vAcc=0;
+    int32_t velN=0;
+    int32_t velE=0;
+    int32_t velD=0;
+    int32_t gSpeed=0;
+    int32_t headMot=0;
+    uint32_t sAcc=0;
+    uint32_t headAcc=0;
+    uint16_t pDOP=0;
+    int32_t headVeh;
+    int16_t magDec;
+    uint16_t magAcc;
+
+    
+} gps_navPVT;
+
+
+void gps_leBootMsg(){
+
+    #define MAXIMUM_PACKET_SIZE 60
+    int packet_size;
+    uint8_t packet[MAXIMUM_PACKET_SIZE];
+    uint8_t value;
+    int cont;
+    value = spi_2.write(0x00);
+
+    while (value  != '$' ){ //wait start boot msg
+        value = spi_2.write(0x00);
+        wait_ms(5);
+        cont++;
+        if (cont > 100){
+            printf("\n no response \n"); 
+            return;
+            }
+    }
+    packet[0] = value;
+        value = spi_2.write(0x00);
+        for (packet_size = 1 ; packet_size <= MAXIMUM_PACKET_SIZE ;packet_size++) {
+            if (value  != '\n' ){
+                packet [packet_size]= value;
+                value = spi_2.write(0x00);
+            }
+            else {
+              //lora_send_packet (packet , (uint8_t) packet_size+1); // manda atraves do lora a mensagem de boot do gps
+              printf("Boot msg: %s \n", packet);
+              return;
+            } 
+        
+        }
+
+}
+
+void gps_le_envia_linha(){
+    
+    uint8_t packet[150];
+    uint8_t value;
+
+    for (int i=0;i < 149; i++){
+        if (value == '\n'){
+            //lora_send_packet (packet , (uint8_t) i);
+            return;
+        }
+        else packet [i] =value;
+    }
+    //lora_send_packet (packet , (uint8_t) 99);
+    
+}
+                               
+
+gps_ubxPacket gps_calcula_check(gps_ubxPacket Packet) {
+ 
+    uint8_t Buffer[Packet.len + 4];
+    uint8_t CK_A=0;
+    uint8_t CK_B=0;
+
+    Buffer[0]= Packet.cls;
+    Buffer[1]= Packet.id;
+    Buffer[2]= Packet.len & 0xFF;
+    Buffer[3]= (Packet.len >> 8)& 0xFF;;
+
+    //send_packet (Buffer, (uint8_t) 4 );
+        
+    for (uint16_t i = 0; i < Packet.len; i++) {
+        Buffer [i+4] = Packet.payload[i] ;
+    }
+    
+    //send_packet (Buffer, (uint8_t) Packet.len + 4 );
+
+    for(int i=0 ; i < Packet.len + 4 ; i++) {
+        CK_A = CK_A + Buffer[i];
+        CK_B = CK_B + CK_A;
+        CK_A = CK_A & 0xFF;
+        CK_B = CK_B & 0xFF;
+        //uint8_t packet_check[5] ={Buffer[i],(uint8_t) (i+1),CK_A,CK_B,'#'};
+//        send_packet (packet_check , (uint8_t) 5);
+    }
+    
+    
+//    uint8_t packet_check[2] ={CK_A, CK_B};
+//    send_packet (packet_check , (uint8_t) 2);
+
+    Packet.checksumA = CK_A;
+    Packet.checksumB = CK_B;
+    
+    return Packet;
+    
+}
+
+void send_gps_packet(gps_ubxPacket packet){
+    
+    spi_2.write(SYNC1);
+    spi_2.write(SYNC2);
+    spi_2.write(packet.cls);
+    spi_2.write(packet.id);
+    spi_2.write(packet.len & 0xFF);
+    spi_2.write((packet.len >> 8)& 0xFF);
+    
+    for (uint16_t i = 0; i < packet.len; i++) {
+        spi_2.write(packet.payload[i]);
+    }
+    spi_2.write(packet.checksumA);
+    spi_2.write(packet.checksumB);
+    
+    //=============imprime resposta
+    wait_ms(50);
+    gps_le_envia_linha();
+    gps_le_envia_linha();
+
+}
+
+gps_navPVT le_nav_pvt () {
+    
+    gps_navPVT Pac;
+    
+    char state = 0;
+    int cont =0;
+    int numb=0;
+    
+    while (1){ //começou mensagem
+        if (cont > 100) {
+           // BMX160_read_acc();
+            return Pac;
+            }
+        if (state == 0 ){
+            
+            if ( spi_2.write(0x00) == 0xB5){
+                state =1;
+                }
+            else {
+                cont++;
+                wait_ms(40);
+            }
+                    
+        }
+        else if (state == 1){ // read 0xb5  
+            if (spi_2.write(0x00) == 0x62){
+                state =2;
+                //wait_ms(30);
+            }
+            else state =0;
+        }
+        else if (state == 2) {// read 0xb5 0x62
+            if (spi_2.write(0x00) == 0x01){
+                //printf("le_nav_pvt going to state 3");
+                state =3;
+                //wait_ms(30);
+            }
+            else state =0;
+        }
+        else if (state == 3) {// read 0xb5 0x62 0x01
+            if (spi_2.write(0x00) == 0x07){
+                state =4;
+                //printf("le_nav_pvt going to state 4");
+                //wait_ms(30);
+            }
+            else state =0;
+        }
+        else if (state == 4) {// read 0xb5 0x62 0x01 0x07
+            if (spi_2.write(0x00) == 0x5c){
+                state =5;
+                //printf("le_nav_pvt going to state 5");
+                //wait_ms(30);
+            }
+            else state =0;
+        }
+        else if (state == 5) {// read 0xb5 0x62 0x01 0x07 0x5c
+            if (spi_2.write(0x00) == 0x00){
+                state =6;
+                //printf("le_nav_pvt going to state 6");
+                //wait_ms(30);
+            }
+            else state =0;
+        }
+        else if (state == 6){ // read 0xb5 0x62 0x01 0x07 0x5c 0x00
+            uint8_t value1,value2,value3,value4;
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.iTOW =  (value4 << 24) + (value3 <<16) + (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            Pac.year = (value2 << 8) + value1;
+            
+            Pac.month = 0xff & spi_2.write(0x00);
+            Pac.day = 0xff & spi_2.write(0x00);
+            Pac.hour = 0xff & spi_2.write(0x00);
+            Pac.min = 0xff & spi_2.write(0x00);
+            Pac.sec = 0xff & spi_2.write(0x00);
+            Pac.valid = 0xff & spi_2.write(0x00);
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.tAcc =  (value4 << 24) + (value3 <<16) + (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.nano =  (value4 << 24) + (value3 <<16) + (value2 << 8) + value1;
+            
+            Pac.fixtype = 0xff & spi_2.write(0x00);
+            Pac.flags = 0xff & spi_2.write(0x00);
+            Pac.flags2 = 0xff & spi_2.write(0x00);
+            Pac.numSV = 0xff & spi_2.write(0x00);
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.lon =  (value4 << 24) + (value3 <<16) + (value2 << 8) + value1;
+            lon=  (value4 << 24) + (value3 <<16) + (value2 << 8) + value1;
+            //printf("Long Data %d \n ", lon);
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.lat =  (value4 << 24) + (value3 <<16) + (value2 << 8) + value1;
+            lat =  (value4 << 24) + (value3 <<16) + (value2 << 8) + value1;
+            //printf("Lat Data %d", lat);
+            
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.height =  (value4 << 24) + (value3 <<16) + (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.hMSL  =  (value4 << 24) + (value3 <<16) + (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.hAcc  =  (value4 << 24) + (value3 <<16) + (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.vAcc  =  (value4 << 24) + (value3 << 16) + (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.velN  =  (value4 << 24) + (value3 << 16) + (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.velE  =  (value4 << 24) + (value3 << 16) + (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.velD  =  (value4 << 24) + (value3 << 16) + (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.gSpeed  =  (value4 << 24) + (value3 << 16) + (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.headMot  =  (value4 << 24) + (value3 << 16) + (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.sAcc  =  (value4 << 24) + (value3 << 16) + (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.headAcc =  (value4 << 24) + (value3 << 16) + (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);                
+            Pac.pDOP  = (value2 << 8) + value1;
+            
+            for (int i=0; i < 6; i++)spi_2.write(0x00); 
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.headAcc  =  (value4 << 24) + (value3 << 16) + (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);
+            value3 = 0xff & spi_2.write(0x00);
+            value4 = 0xff & spi_2.write(0x00);                   
+            Pac.headAcc =  (value4 << 24) + (value3 << 16) + (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);                
+            Pac.magDec = (value2 << 8) + value1;
+            
+            value1 = 0xff & spi_2.write(0x00);
+            value2 = 0xff & spi_2.write(0x00);                
+            Pac.magAcc = (value2 << 8) + value1;
+
+                              
+            return Pac;
+        }
+    }
+        wait_ms(100);  
+}
+
+void send_nav_pvt (){
+    uint8_t packet_nav_pvt[] = {    0xB5,   0x62,   0x01,   0x07,   0x00,   0x00,   0x08,   0x19};
+    
+    //=============envia pacote nav pvt
+    for ( int i=0; i< sizeof(packet_nav_pvt) ; i++){
+        spi_2.write(packet_nav_pvt[i]);
+        wait_ms(5);
+    }
+
+    gps_navPVT Data = le_nav_pvt();
+
+    uint8_t packet [100];
+    
+    packet [0]= (Data.lon >> 24)& 0xff;
+    packet [1]= (Data.lon >> 16) & 0xff ;
+    packet [2]= (Data.lon >> 8) & 0xff;
+    packet [3]= Data.lon  & 0xff;
+    packet [4]= (Data.lat >> 24)& 0xff;
+    packet [5]= (Data.lat >> 16) & 0xff ;
+    packet [6]= (Data.lat >> 8) & 0xff;
+    packet [7]= Data.lat  & 0xff;
+    packet [8]= (Data.hMSL >> 24)& 0xff;
+    packet [9]= (Data.hMSL >> 16) & 0xff ;
+    packet [10]= (Data.hMSL >> 8) & 0xff;
+    packet [11]= Data.hMSL  & 0xff;
+    
+    if (Data.lon !=0 || Data.lat !=0  ){
+        //lora_send_packet (packet , (uint8_t) 12);
+    }
+}
+
+void send_gps_data(uint8_t *packet, uint8_t size){
+    uint8_t packet_rec[size]; 
+    for ( int i=0; i< size  ; i++){
+        spi_2.write(packet[i]);
+
+        //wait_ms(5);
+    }
+    //send_packet (packet_rec ,size);
+}
+
+/*
+void wait_packet (uint8_t *header) {
+    
+    char state = 0;
+    int cont =0;
+    
+    while (1){ //começou mensagem
+        if (cont > 250) {
+            //led2=!led2;
+            return;
+        }
+        if (state == 0 ){
+            if (spi_2.write(0x00) == header[0])
+                state =1;
+            else {
+                cont++;
+                wait_ms(10);
+            }
+        
+            
+        }
+        else if (state == 1){ // read 0xb5  
+            if (spi_2.write(0x00) == header[1]){
+                state =2;
+            }
+            else state =0;
+        }
+        else if (state == 2) {// read 0xb5 0x62
+            if (spi_2.write(0x00) == header[2]){
+                state =3;
+            }
+            else state =0;
+        }
+        else if (state == 3) {// read 0xb5 0x62 0x06
+            if (spi_2.write(0x00) == header[3]){
+                state =4;
+            }
+            else state =0;
+        }
+        else if (state == 4) {// read 0xb5 0x62 0x06 0x013
+        
+            uint8_t packet[100];
+            uint8_t value = spi_2.write(0x00);
+            uint8_t packet_size;
+             
+            for (packet_size = 0 ; packet_size < 100 ;packet_size++) {
+                if (value  != '\n' ){
+                    packet [packet_size]= value;
+                    value = spi_2.write(0x00);
+                }
+                else {
+                  lora_send_packet (packet , (uint8_t) packet_size+1);
+                  //packet_size = MAXIMUM_PACKET_SIZE +1;
+                  return;
+                }             
+            }
+        
+        }
+    }
+}*/
+
+void wait_packet_byte (uint8_t *header, uint8_t byte) {
+    
+    char state = 0;
+    int cont =0;
+    
+    while (1){ //começou mensagem
+        if (cont > 250) {
+            //led2=!led2;
+            return;
+        }
+        if (state == 0 ){
+            if (spi_2.write(0x00) == header[0])
+                state =1;
+            else {
+                cont++;
+                wait_ms(10);
+            }
+        
+            
+        }
+        else if (state == 1){ // read 0xb5  
+            if (spi_2.write(0x00) == header[1]){
+                state =2;
+            }
+            else state =0;
+        }
+        else if (state == 2) {// read 0xb5 0x62
+            if (spi_2.write(0x00) == header[2]){
+                state =3;
+            }
+            else state =0;
+        }
+        else if (state == 3) {// read 0xb5 0x62 0x06
+            if (spi_2.write(0x00) == header[3]){
+                state =4;
+            }
+            else state =0;
+        }
+        else if (state == 4) {// read 0xb5 0x62 0x06 0x013
+            
+            if (byte == 0){//mostrar todo o pacote
+                uint8_t packet[100];
+                uint8_t value = spi_2.write(0x00);
+                uint8_t packet_size;
+                 
+                for (packet_size = 0 ; packet_size < 100 ;packet_size++) {
+                    if (value  != '\n' ){
+                        packet [packet_size]= value;
+                        value = spi_2.write(0x00);
+                    }
+                    else {
+                      //lora_send_packet (packet , (uint8_t) packet_size+1);
+                      //packet_size = MAXIMUM_PACKET_SIZE +1;
+                      return;
+                    }             
+                }//fim for
+            }//fim if byte
+            
+            else {//mostrar apenas um byte
+            
+             
+                for (int i = 0 ; i < byte-1 ;i++)
+                    spi_2.write(0x00);
+                    
+                uint8_t packet[]={(uint8_t)99,(uint8_t)spi_2.write(0x00)};            
+                //lora_send_packet (packet , (uint8_t) 2);
+                   
+                    
+                for (int i = 0 ; i < 100 ;i++)
+                    if (spi_2.write(0x00) == '\n') 
+                        return;
+    
+                return;
+                
+            }//fim else byte
+         
+         }
+        
+      }
+    
+}
+
+
+void gps_wait_same_packet () {
+    
+    char state = 0;
+    int cont =0;
+    
+    while (1){ //começou mensagem
+        if (cont > 250) {
+            //led2=!led2;
+            return;
+        }
+        if (state == 0 ){
+            if (spi_2.write(0x00) == 0xb5)
+                state =1;
+            else {
+                cont++;
+                wait_ms(10);
+            }
+        
+            
+        }
+        else if (state == 1){ // read 0xb5  
+            if (spi_2.write(0x00) == 0x62){
+                state =2;
+            }
+            else state =0;
+        }
+        else if (state == 2){
+                uint8_t packet[200];
+                uint8_t value = spi_2.write(0x00);
+                uint8_t packet_size;
+                 
+                for (packet_size = 0 ; packet_size < 200 ;packet_size++) {
+                    if (value  != '\n' ){
+                        packet [packet_size]= value;
+                        value = spi_2.write(0x00);
+                    }
+                    else {
+                      //lora_send_packet (packet , (uint8_t) packet_size+1);
+                      //packet_size = MAXIMUM_PACKET_SIZE +1;
+                      return;
+                    }
+                             
+                }//fim for   
+               // lora_send_packet (packet , 200);       
+        }
+    }
+}
+
+void gps_config_gnss (){
+    
+    uint8_t packet_cfg_gnss[] = {
+      0xB5, 0x62, // Header
+      0x03, 0x3E, // Class ID = CFG, Msg ID = UBX-CFG-GNSS
+      0x3C, 0x00, // Payload Length = 60 bytes
+      0x00, 0x00, 0x20, 0x07, // msgVer=0, numTrkChHw=32, numTrkChUse=32, numConfigBlocks=7
+      0x00, 0x08, 0x10, 0x00, 0x01, 0x00, 0x01, 0x01, // gnssId=0 (GPS), resTrkCh=8, maxTrkCh=12, ENABLE
+      0x01, 0x01, 0x03, 0x00, 0x01, 0x00, 0x01, 0x00, // gnssId=1 (SBAS), resTrkCh=1, maxTrkCh=2, ENABLE
+      0x02, 0x04, 0x0A, 0x00, 0x01, 0x00, 0x01, 0x00, // gnssId=2 (Galileo), resTrkCh=4, maxTrkCh=10, ENABLE 
+      0x03, 0x04, 0x08, 0x00, 0x00, 0x00, 0x01, 0x00, // gnssId=3 (BeiDou), resTrkCh=4, maxTrkCh=8, DISABLE 
+      0x04, 0x00, 0x08, 0x00, 0x00, 0x00, 0x01, 0x00, // gnssId=4 (IMES), resTrkCh=0, maxTrkCh=8, DISABLE
+      0x05, 0x00, 0x03, 0x00, 0x00, 0x00, 0x01, 0x00, // gnssId=5 (QZSS), resTrkCh=0, maxTrkCh=3, DISABLE
+      0x06, 0x04, 0x08, 0x00, 0x01, 0x00, 0x01, 0x00, // gnssId=6 (GLONASS), resTrkCh=4, maxTrkCh=8, ENABLE
+      0x00, 0x00 //checksums A &amp; B
+    };
+    uint8_t pos_ck = sizeof(packet_cfg_gnss)-2;
+    printf("gnss config finish");
+    uint8_t ubxi;
+    //calcula checksum
+    for (ubxi=2; ubxi<pos_ck ; ubxi++) {
+        packet_cfg_gnss[pos_ck] = packet_cfg_gnss[pos_ck] + packet_cfg_gnss[ubxi];
+        packet_cfg_gnss[pos_ck+1] = packet_cfg_gnss[pos_ck+1] + packet_cfg_gnss[pos_ck];
+    }
+    
+}
+
+
+void gps_print_local (){
+    uint8_t packet_nav_pvt[] = {    0xB5,   0x62,   0x01,   0x07,   0x00,   0x00,   0x08,   0x19};
+    
+    //=============envia pacote nav pvt
+    for ( int i=0; i< sizeof(packet_nav_pvt) ; i++){
+        spi_2.write(packet_nav_pvt[i]);
+        wait_ms(20);
+    }
+    
+    gps_navPVT Data = le_nav_pvt();  
+   
+    //printf ("gps lat=%d lon=%d \n",Data.lat ,Data.lon );
+    //lat=Data.lat;
+    //lon=Data.lon;
+}
+
+void gps_config (){
+    gps_DSEL = 0;
+    //spi gps configuration
+    spi_2.format(8,0);
+    spi_2.frequency(1000000); //1MHz
+    cs=1;
+    wait(0.1);
+    cs=0;
+    wait(0.1);
+    
+    gps_int = 0;
+    
+    //gps reset
+    gps_reset = 1;    
+    wait_ms(50);
+    //gps_reset = 0;    
+    //wait(1.5);
+}
+

diff -r c4f9e9202fb4 -r 65744bc8ab55 main.cpp
--- a/main.cpp	Mon Nov 30 19:25:11 2020 +0000
+++ b/main.cpp	Fri Jan 08 20:16:58 2021 +0000
@@ -24,14 +24,14 @@
 //#include "DummySensor.h"
 #include "trace_helper.h"
 #include "lora_radio_helper.h"
-#include "BME280.h"
+//#include "BME280.h"
 
 using namespace events;
 
 // Max payload size can be LORAMAC_PHY_MAXPAYLOAD.
 // This example only communicates with much shorter messages (<30 bytes).
 // If longer messages are used, these buffers must be changed accordingly.
-uint8_t tx_buffer[30];
+uint8_t tx_buffer[256];
 uint8_t rx_buffer[30];
 
 /*
@@ -65,9 +65,9 @@
 /**
  * Sensors Variables
  */
-        uint32_t lux = 0;
-        uint32_t amb = 0;
-        float  sensor_get = 0;
+//        uint32_t lux = 0;
+//        uint32_t amb = 0;
+//        float  sensor_get = 0;
 
 /**
 * This event queue is the global event queue for both the
@@ -102,9 +102,121 @@
  
 mbed::DigitalOut _alive_led(P1_13, 0);
 mbed::DigitalOut _actuated_led(P1_14,1);
+int lat=0;
+int lon=0;
+int latitude=0;
+int longitude=0;
+
+
+//Temperature, Pressure, Humidity Sensor
+#include "BME280.txt"
+#include "BMX160.txt"
+#include "gps.txt"
+
+void BMX160Read (void)
+{    
+    /*Le os Registradores do Acelerometro*/
+        i2c_reg_buffer[0] = 0x12;
+        i2c.write(BMI160_ADDR, i2c_reg_buffer, 1, true);
+        i2c.read(BMI160_ADDR, (char *)&acc_sample_buffer, sizeof(acc_sample_buffer), false);
+        
+        /*Le os Registradores do Giroscopio*/
+        i2c_reg_buffer[0] = 0x0C;
+        i2c.write(BMI160_ADDR, i2c_reg_buffer, 1, true);
+        i2c.read(BMI160_ADDR, (char *)&gyr_sample_buffer, sizeof(gyr_sample_buffer), false);
+        
+        /*Ajusta dados brutos Acelerometro em unidades de g */
+        acc_result_buffer[0] = (acc_sample_buffer[0]/16384.0);
+        acc_result_buffer[1] = (acc_sample_buffer[1]/16384.0);
+        acc_result_buffer[2] = (acc_sample_buffer[2]/16384.0);
+        
+        /*Ajusta dados Brutos do Giroscopio em unidades de deg/s */
+        gyr_result_buffer[0] = (gyr_sample_buffer[0]/131.2);
+        gyr_result_buffer[1] = (gyr_sample_buffer[1]/131.2);
+                
+        /*Calcula os Angulos de Inclinacao com valor do Acelerometro*/
+        accel_ang_x=atan(acc_result_buffer[0]/sqrt(pow(acc_result_buffer[1],2) + pow(acc_result_buffer[2],2)))*RAD_DEG;
+        accel_ang_y=atan(acc_result_buffer[1]/sqrt(pow(acc_result_buffer[0],2) + pow(acc_result_buffer[2],2)))*RAD_DEG;
+        
+        /*Calcula os Angulos de Rotacao com valor do Giroscopio e aplica filtro complementar realizando a fusao*/
+        tiltx = (0.98*(tiltx_prev+(gyr_result_buffer[0]*0.001)))+(0.02*(accel_ang_x));
+        tilty = (0.98*(tilty_prev+(gyr_result_buffer[1]*0.001)))+(0.02*(accel_ang_y));
+        
+        tiltx_prev = tiltx;
+        tilty_prev = tilty;                                 
+        
+        /*Imprime os dados ACC pre-formatados*/
+        printf("%.3f,%.3f;",tiltx, tilty);
+    
+    }
+
+void GPS_Read(void)
+{
+    gps_print_local();
+    printf ("gps longitude=%d \n",lon);
+    printf ("gps latitude=%d \n",lat);
+    if(lat!=0 && lon!=0){
+        longitude=lon;
+        latitude=lat;
+//        led1 = !led1;
+        }
+     }
 
 int main(void)
 {
+    gps_config();
+    gps_leBootMsg();
+    gps_config_gnss ();
+    init();
+    
+    //BMX160 Declaration######################################
+    //    pc.printf("Teste BMI160\n\r");
+//    printf("Configurando BMX160...\n\r");
+    wait_ms(250);
+    
+    /*Config Freq. I2C Bus*/
+    i2c.frequency(20000);
+    
+    /*Reset BMI160*/
+    i2c_reg_buffer[0] = 0x7E;
+    i2c_reg_buffer[1] = 0xB6;    
+    i2c.write(BMI160_ADDR, i2c_reg_buffer, sizeof(i2c_reg_buffer), false);
+    wait_ms(200);
+//    printf("BMI160 Resetado\n\r");
+    
+    /*Habilita o Acelerometro*/
+    i2c_reg_buffer[0] = 0x7E;
+    i2c_reg_buffer[1] = 0x11; //PMU Normal   
+    i2c.write(BMI160_ADDR, i2c_reg_buffer, sizeof(i2c_reg_buffer), false);
+//    printf("Acc Habilitado\n\r");
+    
+    /*Habilita o Giroscopio*/
+    i2c_reg_buffer[0] = 0x7E;
+    i2c_reg_buffer[1] = 0x15;  //PMU Normal 
+    i2c.write(BMI160_ADDR, i2c_reg_buffer, sizeof(i2c_reg_buffer), false);
+//    printf("Gyr Habilitado\n\r");
+    
+    /*Config o Data Rate ACC em 1600Hz*/
+    i2c_reg_buffer[0] = 0x40;
+    i2c_reg_buffer[1] = 0x2C;    
+    i2c.write(BMI160_ADDR, i2c_reg_buffer, sizeof(i2c_reg_buffer), false);
+//    printf("Data Rate ACC Selecionado a 1600Hz\n\r");
+    
+    /*Config o Data Rate GYR em 1600Hz*/
+    i2c_reg_buffer[0] = 0x42;
+    i2c_reg_buffer[1] = 0x2C;    
+    i2c.write(BMI160_ADDR, i2c_reg_buffer, sizeof(i2c_reg_buffer), false);
+//    printf("Data Rate GYR Selecionado a 1600Hz\n\r");
+    
+    /*Config o Range GYR em 250º/s*/
+    i2c_reg_buffer[0] = 0x43;
+    i2c_reg_buffer[1] = 0x03;    
+    i2c.write(BMI160_ADDR, i2c_reg_buffer, sizeof(i2c_reg_buffer), false);
+//    printf("Range GYR Selecionado a 250deg/s\n\r");
+    
+    printf("BMX160 Configurado\n\r");
+    
+    //########################################################
     // setup tracing
     setup_trace();
 
@@ -167,8 +279,9 @@
     uint16_t packet_len;
     int16_t retcode;
     int32_t sensor_value;
+    gps_print_local();
     
-    packet_len = sprintf((char *) tx_buffer, "Sensor Value is 10.0\n");
+    packet_len = sprintf((char *) tx_buffer, "%2.2f, %04.2f, %2.2f, %d, %d\n", getTemperature(), getPressure(), getHumidity(), lon, lat);
 
     retcode = lorawan.send(MBED_CONF_LORA_APP_PORT, tx_buffer, packet_len,
                            MSG_UNCONFIRMED_FLAG);
@@ -180,13 +293,17 @@
         if (retcode == LORAWAN_STATUS_WOULD_BLOCK) {
             //retry in 3 seconds
             if (MBED_CONF_LORA_DUTY_CYCLE_ON) {
-                ev_queue.call_in(3000, send_message);
+                ev_queue.call_in(10000, send_message);
             }
         }
         return;
     }
 
-    printf("\r\n %d bytes scheduled for transmission \r\n", retcode);
+    printf("%2.2f;%04.2f;%2.2f;", getTemperature(), getPressure(), getHumidity());
+    BMX160Read();
+    printf ("%d;",lon);
+    printf ("%d \r\n",lat);
+//    printf("\r\n %d bytes scheduled for transmission \r\n", retcode);
     memset(tx_buffer, 0, sizeof(tx_buffer));
 }
 
@@ -200,11 +317,11 @@
     int16_t retcode = lorawan.receive(rx_buffer, sizeof(rx_buffer), port, flags);
 
     if (retcode < 0) {
-        printf("\r\n receive() - Error code %d \r\n", retcode);
+//        printf("\r\n receive() - Error code %d \r\n", retcode);
         return;
     }
 
-    printf(" RX Data on port %u (%d bytes): ", port, retcode);
+//    printf(" RX Data on port %u (%d bytes): ", port, retcode);
     for (uint8_t i = 0; i < retcode; i++) {
         printf("%02x ", rx_buffer[i]);
     }
@@ -233,38 +350,38 @@
             printf("\r\n Disconnected Successfully \r\n");
             break;
         case TX_DONE:
-            printf("\r\n Message Sent to Network Server \r\n");
+//            printf("\r\n Message Sent to Network Server \r\n");
             if (MBED_CONF_LORA_DUTY_CYCLE_ON) {
                 send_message();
             }
             break;
         case TX_TIMEOUT:
-        printf("\r\n Transmission Error TX_Timeout");
+//        printf("\r\n Transmission Error TX_Timeout");
         case TX_ERROR:
-        printf("\r\n Transmission Error TX_Error");
+//        printf("\r\n Transmission Error TX_Error");
         case TX_CRYPTO_ERROR:
-        printf("\r\n Transmission Error TX_Crypto_Error");
+//        printf("\r\n Transmission Error TX_Crypto_Error");
         case TX_SCHEDULING_ERROR:
-            printf("\r\n Transmission Error - EventCode = %d \r\n", event);
+//            printf("\r\n Transmission Error - EventCode = %d \r\n", event);
             // try again
             if (MBED_CONF_LORA_DUTY_CYCLE_ON) {
                 send_message();
             }
             break;
         case RX_DONE:
-            printf("\r\n Received message from Network Server \r\n");
+//            printf("\r\n Received message from Network Server \r\n");
             receive_message();
             break;
         case RX_TIMEOUT:
-        printf("\r\n Transmission Error RX_Timeout");
+//        printf("\r\n Transmission Error RX_Timeout");
         case RX_ERROR:
-            printf("\r\n Error in reception - Code = %d \r\n", event);
+//            printf("\r\n Error in reception - Code = %d \r\n", event);
             break;
         case JOIN_FAILURE:
-            printf("\r\n OTAA Failed - Check Keys \r\n");
+//            printf("\r\n OTAA Failed - Check Keys \r\n");
             break;
         case UPLINK_REQUIRED:
-            printf("\r\n Uplink required by NS \r\n");
+//            printf("\r\n Uplink required by NS \r\n");
             if (MBED_CONF_LORA_DUTY_CYCLE_ON) {
                 send_message();
             }