The present code implements and checks the current temperature.
Fork of 2645_I2C_TMP102 by
main.h
- Committer:
- bonnyngangu
- Date:
- 2016-05-09
- Revision:
- 2:0047b6c36b3e
- Parent:
- main.cpp@ 1:dd5fb735acf1
File content as of revision 2:0047b6c36b3e:
/* Joystick_Project Bonny Ngangu 6 March 2016 (c) Bonny Ngangu, University of Leeds, Feb 2016 */ #include "mbed.h" // include the library header, ensure the library has been imported into the project #include "TMP102.h" #include "N5110.h" // Create TMP102 object TMP102 tmp102(I2C_SDA,I2C_SCL); // UART connection for PC Serial pc(USBTX,USBRX); // K64F on-board LEDs DigitalOut r_led(LED_RED); DigitalOut g_led(LED_GREEN); DigitalOut b_led(LED_BLUE); // K64F on-board switches InterruptIn sw2(SW2); InterruptIn sw3(SW3); // error function hangs flashing an LED void error(); // setup serial port void init_serial(); // set-up the on-board LEDs and switches void init_K64F(); void printString(); void init_serial() { // set to highest baud - ensure terminal software matches pc.baud(115200); } void init_K64F() { // on-board LEDs are active-low, so set pin high to turn them off. r_led = 1; g_led = 1; b_led = 1; // since the on-board switches have external pull-ups, we should disable the internal pull-down // resistors that are enabled by default using InterruptIn sw2.mode(PullNone); sw3.mode(PullNone); }