Diff: inc/drivers/MicroBitPin.h

Revision:

65:f7ebabf23e15

Parent:

63:b4372a29994f

Child:

66:2fc7d7c2fffc

diff -r 98cb56bf7711 -r f7ebabf23e15 inc/drivers/MicroBitPin.h
--- a/inc/drivers/MicroBitPin.h	Wed Jul 13 12:18:43 2016 +0100
+++ b/inc/drivers/MicroBitPin.h	Wed Jul 13 12:18:45 2016 +0100
@@ -95,8 +95,8 @@
 {
     // The mbed object looking after this pin at any point in time (untyped due to dynamic behaviour).
     void *pin;
+
     PinCapability capability;
-    uint8_t pullMode;
 
     /**
       * Disconnect any attached mBed IO from this pin.
@@ -200,21 +200,6 @@
     int getDigitalValue();
 
     /**
-      * Configures this IO pin as a digital input with the specified internal pull-up/pull-down configuraiton (if necessary) and tests its current value.
-      *
-      * @param pull one of the mbed pull configurations: PullUp, PullDown, PullNone
-      *
-      * @return 1 if this input is high, 0 if input is LO, or MICROBIT_NOT_SUPPORTED
-      *         if the given pin does not have digital capability.
-      *
-      * @code
-      * MicroBitPin P0(MICROBIT_ID_IO_P0, MICROBIT_PIN_P0, PIN_CAPABILITY_BOTH);
-      * P0.getDigitalValue(PullUp); // P0 is either 0 or 1;
-      * @endcode
-      */
-    int getDigitalValue(PinMode pull);
-
-    /**
       * Configures this IO pin as an analog/pwm output, and change the output value to the given level.
       *
       * @param value the level to set on the output pin, in the range 0 - 1024