Diff: spi_api.h

Revision:

2:e32c8485c88f

Parent:

1:a7c51b5e0534

Child:

3:768173a57492

--- a/spi_api.h	Thu Apr 07 17:50:29 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,213 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_SPI_API_H
-#define MBED_SPI_API_H
-
-#include "device.h"
-#include "dma_api.h"
-#include "buffer.h"
-
-#if DEVICE_SPI
-
-#define SPI_EVENT_ERROR       (1 << 1)
-#define SPI_EVENT_COMPLETE    (1 << 2)
-#define SPI_EVENT_RX_OVERFLOW (1 << 3)
-#define SPI_EVENT_ALL         (SPI_EVENT_ERROR | SPI_EVENT_COMPLETE | SPI_EVENT_RX_OVERFLOW)
-
-#define SPI_EVENT_INTERNAL_TRANSFER_COMPLETE (1 << 30) // internal flag to report an event occurred
-
-#define SPI_FILL_WORD         (0xFFFF)
-
-#if DEVICE_SPI_ASYNCH
-/** Asynch spi hal structure
- */
-typedef struct {
-    struct spi_s spi;        /**< Target specific spi structure */
-    struct buffer_s tx_buff; /**< Tx buffer */
-    struct buffer_s rx_buff; /**< Rx buffer */
-} spi_t;
-
-#else
-/** Non-asynch spi hal structure
- */
-typedef struct spi_s spi_t;
-
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * \defgroup GeneralSPI SPI Configuration Functions
- * @{
- */
-
-/** Initialize the SPI peripheral
- *
- * Configures the pins used by SPI, sets a default format and frequency, and enables the peripheral
- * @param[out] obj  The SPI object to initialize
- * @param[in]  mosi The pin to use for MOSI
- * @param[in]  miso The pin to use for MISO
- * @param[in]  sclk The pin to use for SCLK
- * @param[in]  ssel The pin to use for SSEL
- */
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel);
-
-/** Release a SPI object
- *
- * TODO: spi_free is currently unimplemented
- * This will require reference counting at the C++ level to be safe
- *
- * Return the pins owned by the SPI object to their reset state
- * Disable the SPI peripheral
- * Disable the SPI clock
- * @param[in] obj The SPI object to deinitialize
- */
-void spi_free(spi_t *obj);
-
-/** Configure the SPI format
- *
- * Set the number of bits per frame, configure clock polarity and phase, shift order and master/slave mode
- * @param[in,out] obj   The SPI object to configure
- * @param[in]     bits  The number of bits per frame
- * @param[in]     mode  The SPI mode (clock polarity, phase, and shift direction)
- * @param[in]     slave Zero for master mode or non-zero for slave mode
- */
-void spi_format(spi_t *obj, int bits, int mode, int slave);
-
-/** Set the SPI baud rate
- *
- * Actual frequency may differ from the desired frequency due to available dividers and bus clock
- * Configures the SPI peripheral's baud rate
- * @param[in,out] obj The SPI object to configure
- * @param[in]     hz  The baud rate in Hz
- */
-void spi_frequency(spi_t *obj, int hz);
-
-/**@}*/
-/**
- * \defgroup SynchSPI Synchronous SPI Hardware Abstraction Layer
- * @{
- */
-
-/** Write a byte out in master mode and receive a value
- *
- * @param[in] obj   The SPI peripheral to use for sending
- * @param[in] value The value to send
- * @return Returns the value received during send
- */
-int  spi_master_write(spi_t *obj, int value);
-
-/** Check if a value is available to read
- *
- * @param[in] obj The SPI peripheral to check
- * @return non-zero if a value is available
- */
-int  spi_slave_receive(spi_t *obj);
-
-/** Get a received value out of the SPI receive buffer in slave mode
- *
- * Blocks until a value is available
- * @param[in] obj The SPI peripheral to read
- * @return The value received
- */
-int  spi_slave_read(spi_t *obj);
-
-/** Write a value to the SPI peripheral in slave mode
- *
- * Blocks until the SPI peripheral can be written to
- * @param[in] obj   The SPI peripheral to write
- * @param[in] value The value to write
- */
-void spi_slave_write(spi_t *obj, int value);
-
-/** Checks if the specified SPI peripheral is in use
- *
- * @param[in] obj The SPI peripheral to check
- * @return non-zero if the peripheral is currently transmitting
- */
-int  spi_busy(spi_t *obj);
-
-/** Get the module number
- *
- * @param[in] obj The SPI peripheral to check
- * @return The module number
- */
-uint8_t spi_get_module(spi_t *obj);
-
-/**@}*/
-
-#if DEVICE_SPI_ASYNCH
-/**
- * \defgroup AsynchSPI Asynchronous SPI Hardware Abstraction Layer
- * @{
- */
-
-/** Begin the SPI transfer. Buffer pointers and lengths are specified in tx_buff and rx_buff
- *
- * @param[in] obj       The SPI object which holds the transfer information
- * @param[in] tx        The buffer to send
- * @param[in] tx_length The number of words to transmit
- * @param[in] rx        The buffer to receive
- * @param[in] rx_length The number of words to receive
- * @param[in] bit_width The bit width of buffer words
- * @param[in] event     The logical OR of events to be registered
- * @param[in] handler   SPI interrupt handler
- * @param[in] hint      A suggestion for how to use DMA with this transfer
- */
-void spi_master_transfer(spi_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length, uint8_t bit_width, uint32_t handler, uint32_t event, DMAUsage hint);
-
-/** The asynchronous IRQ handler
- *
- * Reads the received values out of the RX FIFO, writes values into the TX FIFO and checks for transfer termination
- * conditions, such as buffer overflows or transfer complete.
- * @param[in] obj     The SPI object which holds the transfer information
- * @return event flags if a transfer termination condition was met or 0 otherwise.
- */
-uint32_t spi_irq_handler_asynch(spi_t *obj);
-
-/** Attempts to determine if the SPI peripheral is already in use.
- *
- * If a temporary DMA channel has been allocated, peripheral is in use.
- * If a permanent DMA channel has been allocated, check if the DMA channel is in use.  If not, proceed as though no DMA
- * channel were allocated.
- * If no DMA channel is allocated, check whether tx and rx buffers have been assigned.  For each assigned buffer, check
- * if the corresponding buffer position is less than the buffer length.  If buffers do not indicate activity, check if
- * there are any bytes in the FIFOs.
- * @param[in] obj The SPI object to check for activity
- * @return non-zero if the SPI port is active or zero if it is not.
- */
-uint8_t spi_active(spi_t *obj);
-
-/** Abort an SPI transfer
- *
- * @param obj The SPI peripheral to stop
- */
-void spi_abort_asynch(spi_t *obj);
-
-
-#endif
-
-/**@}*/
-
-#ifdef __cplusplus
-}
-#endif // __cplusplus
-
-#endif // SPI_DEVICE
-
-#endif // MBED_SPI_API_H