Biswajit Padhi
wui0iuytdsaertyuio
Fork of
ESP8266-WEB-Mbed-LPC1768-Controller
by 
jim hamblen
main.cpp
- Committer:
- star297
- Date:
- 2015-02-24
- Revision:
- 3:f7febfa77784
- Parent:
- 2:d4c6bc0f2dc4
- Child:
- 4:40dd020463ea
File content as of revision 3:f7febfa77784:
// ESP8266 Static page WEB server to control Mbed
#include "mbed.h"
#include "DS18B20.h"
Serial pc(USBTX, USBRX);
Serial esp(PTE0, PTE1); // tx, rx
DS18B20 thermom(A0, DS18B20::RES_12_BIT);
// Standard Mbed LED definitions
DigitalOut led1(LED_RED); // (PTB18)
DigitalOut led2(LED_GREEN); // (PTB19)
DigitalOut led3(LED_BLUE); // (PTD1)
// Digital Out and In pins, can be configured to any suitable pin depending on Platform
DigitalOut Out1(D7);
DigitalOut Out2(D8);
DigitalOut Out3(D4);
DigitalIn In1(A2);
DigitalIn In2(A3);
DigitalIn In3(A4);
PwmOut speaker(D5);
AnalogIn BATin(A1);
Timer t1;
Timer t2;
struct tm t;
int bufflen, DataRX, count, getcount, replycount, servreq, timeout;
int bufl, ipdLen, linkID, weberror, webcounter;
float temperature, AdcIn, Ht;
float R1=100000, R2=10000; // resistor values to give a 10:1 reduction of measured AnalogIn voltage
char Vcc[10];
char Temp[10];
char temp[10];
char webcount[8];
char lasthit[30];
char timebuf[30];
char type[16];
char type1[16];
char channel[2];
char cmdbuff[32];
char replybuff[512];
char webdata[1024]; // This may need to be bigger depending on WEB browser used
char webbuff[4096]; // Currently using 1986 characters, Increase this if more web page data added
void SendCMD(),getreply(),ReadWebData(),startserver(),sendpage(),SendWEB(),sendcheck();
void gettime(),gettemp(),getbattery(),setRTC(),beep();
// manual set RTC values
int minute =20; // 0-59
int hour =9; // 2-23
int dayofmonth =20; // 1-31
int month =2; // 1-12
int year =15; // last 2 digits
int port =8266; // set server port
int SERVtimeout =5; // set server timeout in seconds incase link breaks.
// Serial Interrupt read ESP data
void callback() {
while (esp.readable()) {webbuff[count] = esp.getc();count++;}
if(strlen(webbuff)>bufflen){DataRX=1;}
}
int main() {
led1=1,led2=1,led3=1;
pc.baud(115200);
esp.baud(115200); // ESP8266 baudrate. Maximum on KLxx' is 115200, 230400 works on K20 and K22F
if (time(NULL) < 1420070400) {setRTC();}
beep();
startserver();
while(1){
if(DataRX==1){
ReadWebData();
beep();
if (servreq == 1 && weberror == 0){sendpage();}
esp.attach(&callback);
pc.printf(" IPD Data:\r\n\n Link ID = %d,\r\n IPD Header Length = %d \r\n IPD Type = %s\r\n", linkID, ipdLen, type);
pc.printf("\n\n HTTP Packet: \n\n%s\n", webdata);
pc.printf(" Web Characters sent : %d\n\n", bufl);
pc.printf(" -------------------------------------\n\n");
strcpy(lasthit, timebuf);
servreq=0;
}
}
}
// Static WEB page
void sendpage()
{
gettemp();
getbattery();gettime();
// WEB page data
strcpy(webbuff, "<!DOCTYPE html>");
strcat(webbuff, "<html><head><title>ESP8266 Mbed</title></head>");
strcat(webbuff, "<body>");
strcat(webbuff, "<div style=\"text-align:center; background-color:#F4F4F4; color:#00AEDB;\"><h1>ESP8266 Mbed Web Controller</h1>");
strcat(webbuff, "Hit Count - ");
strcat(webbuff, webcount);
strcat(webbuff, "<br>Last Hit - ");
strcat(webbuff, lasthit);
strcat(webbuff, "</div><br /><hr>");
strcat(webbuff, "<h3>Mbed RTC Time -  ");
strcat(webbuff, timebuf);
strcat(webbuff, "</h3>\r\n");
strcat(webbuff, "<p><form method=\"POST\"><strong> Temperature:  <input type=\"text\" size=6 value=\"");
strcat(webbuff, Temp);
strcat(webbuff, "\"> <sup>O</sup>C <form method=\"POST\"> <strong>   Battery:  <input type=\"text\" size=4 value=\"");
strcat(webbuff, Vcc);
strcat(webbuff, "\"> </sup>V");
if(led1==1){strcat(webbuff, "<p><input type=\"radio\" name=\"led1\" value=\"0\" checked> Red LED off");
strcat(webbuff, "<br><input type=\"radio\" name=\"led1\" value=\"1\" > Red LED on");}
else{strcat(webbuff, "<p><input type=\"radio\" name=\"led1\" value=\"0\" > Red LED off");
strcat(webbuff, "<br><input type=\"radio\" name=\"led1\" value=\"1\" checked> Red LED on");}
if(Out1==0){strcat(webbuff, "<p><input type=\"radio\" name=\"Out1\" value=\"0\" checked> Digital Out 1 off");
strcat(webbuff, "<br><input type=\"radio\" name=\"Out1\" value=\"1\" > Digital Out 1 on");}
else{strcat(webbuff, "<p><input type=\"radio\" name=\"Out1\" value=\"0\" > Digital Out 1 off");
strcat(webbuff, "<br><input type=\"radio\" name=\"Out1\" value=\"1\" checked> Digital Out 1 on");}
if(Out2==0){strcat(webbuff, "<p><input type=\"radio\" name=\"Out2\" value=\"0\" checked> Digital Out 2 off");
strcat(webbuff, "<br><input type=\"radio\" name=\"Out2\" value=\"1\" > Digital Out 2 on");}
else{strcat(webbuff, "<p><input type=\"radio\" name=\"Out2\" value=\"0\" > Digital Out 2 off");
strcat(webbuff, "<br><input type=\"radio\" name=\"Out2\" value=\"1\" checked> Digital Out 2 on");}
if(Out3==0){strcat(webbuff, "<p><input type=\"radio\" name=\"Out3\" value=\"0\" checked> Digital Out 3 off");
strcat(webbuff, "<br><input type=\"radio\" name=\"Out3\" value=\"1\" > Digital Out 3 on");}
else{strcat(webbuff, "<p><input type=\"radio\" name=\"Out3\" value=\"0\" > Digital Out 3 off");
strcat(webbuff, "<br><input type=\"radio\" name=\"Out3\" value=\"1\" checked> Digital Out 3 on");}
if(In1==0){strcat(webbuff, "<p><input type=\"radio\" name=\"In1\" value=\"0\" > Digital In 1");}
else{strcat(webbuff, "<p><input type=\"radio\" name=\"In1\" value=\"1\" checked> Digital In 1");}
if(In2==0){strcat(webbuff, "<br><input type=\"radio\" name=\"In2\" value=\"0\" > Digital In 2");}
else{strcat(webbuff, "<br><input type=\"radio\" name=\"In2\" value=\"1\" checked> Digital In 2");}
if(In3==0){strcat(webbuff, "<br><input type=\"radio\" name=\"In3\" value=\"0\" > Digital In 3");}
else{strcat(webbuff, "<br><input type=\"radio\" name=\"In3\" value=\"1\" checked> Digital In 3");}
strcat(webbuff, "</strong><p><input type=\"submit\" value=\"send-refresh\" style=\"background: #3498db;");
strcat(webbuff, "background-image:-webkit-linear-gradient(top, #3498db, #2980b9);");
strcat(webbuff, "background-image:linear-gradient(to bottom, #3498db, #2980b9);");
strcat(webbuff, "-webkit-border-radius:12;border-radius: 12px;font-family: Arial;color:#ffffff;font-size:20px;padding:");
strcat(webbuff, "10px 20px 10px 20px; border:solid #103c57 3px;text-decoration: none;");
strcat(webbuff, "background: #3cb0fd;");
strcat(webbuff, "background-image:-webkit-linear-gradient(top,#3cb0fd,#1a5f8a);");
strcat(webbuff, "background-image:linear-gradient(to bottom,#3cb0fd,#1a5f8a);");
strcat(webbuff, "text-decoration:none;\"></form></span>");
strcat(webbuff, "<p/><h2>How to use:</h2><ul>");
strcat(webbuff, "<li>Select the Radio buttons to control the digital out pins.</li>");
strcat(webbuff, "<li>Click 'Send-Refresh' to send.</li>");
strcat(webbuff, "<li>Use the 'Send-Refresh' button to refresh the data.</li>");
strcat(webbuff, "</ul>");
strcat(webbuff, "</body></html>");
// end of WEB page data
bufl = strlen(webbuff); // get total page buffer length
sprintf(cmdbuff,"AT+CIPSEND=%d,%d\r\n", linkID, bufl); // send IPD link channel and buffer character length.
timeout=200;getcount=7;
SendCMD();
getreply();
SendWEB(); // send web page
memset(webbuff, '\0', sizeof(webbuff));
sendcheck();
}
// wait for ESP "SEND OK" reply, then close IP to load web page
void sendcheck()
{
weberror=1;timeout=500;getcount=24;
t2.reset();t2.start();
while(weberror==1 && t2.read() <5){
getreply();
if (strstr(replybuff, "SEND OK") != NULL) {weberror=0;} // wait for valid SEND OK
}
if(weberror==1){ // restart connection
strcpy(cmdbuff, "AT+CIPMUX=1\r\n");
timeout=500;getcount=10;
SendCMD();getreply();
sprintf(cmdbuff,"AT+CIPSERVER=1,%d\r\n", port);
timeout=500;getcount=10;
SendCMD();getreply();
}
else{
sprintf(cmdbuff, "AT+CIPCLOSE=%s\r\n",channel); // close current connection
SendCMD();}
t2.reset();
}
// Reads and processes GET and POST web data
void ReadWebData()
{
wait_ms(200);
esp.attach(NULL);
count=0;DataRX=0;weberror=0;
memset(webdata, '\0', sizeof(webdata));
int x = strcspn (webbuff,"+");
if(x){
strcpy(webdata, webbuff + x);weberror=0;
int numMatched = sscanf(webdata,"+IPD,%d,%d:%s", &linkID, &ipdLen, type);
if( strstr(webdata, "led1=1") != NULL ) {led1=0;}
if( strstr(webdata, "led1=0") != NULL ) {led1=1;}
if( strstr(webdata, "Out1=1") != NULL ) {Out1=1;}
if( strstr(webdata, "Out1=0") != NULL ) {Out1=0;}
if( strstr(webdata, "Out2=1") != NULL ) {Out2=1;}
if( strstr(webdata, "Out2=0") != NULL ) {Out2=0;}
if( strstr(webdata, "Out3=1") != NULL ) {Out3=1;}
if( strstr(webdata, "Out3=0") != NULL ) {Out3=0;}
sprintf(channel, "%d",linkID);
if (strstr(webdata, "GET") != NULL) {servreq=1;}
if (strstr(webdata, "POST") != NULL) {servreq=1;}
webcounter++;
sprintf(webcount, "%d",webcounter);
}
else {
memset(webbuff, '\0', sizeof(webbuff));
esp.attach(&callback);weberror=1;
}
}
// Starts and restarts webserver if errors detected.
void startserver()
{
gettemp();gettime();
pc.printf("\n\n RTC time %s\r\n\n",timebuf);
pc.printf("++++++++++ Resetting ESP ++++++++++\r\n");
strcpy(cmdbuff,"AT+RST\r\n");
timeout=2000;getcount=600;
SendCMD();
getreply();
pc.printf(replybuff);
pc.printf("%d",count);
if (strstr(replybuff, "OK") != NULL) {
pc.printf("\n++++++++++ Starting Server ++++++++++\r\n");
strcpy(cmdbuff, "AT+CIPMUX=1\r\n"); // set multiple connections.
timeout=500;getcount=10;
SendCMD();
getreply();
sprintf(cmdbuff,"AT+CIPSERVER=1,%d\r\n", port);
timeout=500;getcount=10;
SendCMD();
getreply();
sprintf(cmdbuff,"AT+CIPSTO=%d\r\n",SERVtimeout);
timeout=500;getcount=50;
SendCMD();
getreply();
pc.printf("\n Getting Server IP \r\n");
strcpy(cmdbuff, "AT+CIFSR\r\n");
timeout=1000;getcount=50;
while(weberror==0){
SendCMD();getreply();
if (strstr(replybuff, "0.0.0.0") == NULL) {weberror=1;} // wait for valid IP
}
pc.printf("\n Enter WEB address in your browser \r\n\n");
replybuff[strlen(replybuff) - 8] = '\0';
char* IP = replybuff + 5;
sprintf(webdata," http://%s:%d", IP, port);
pc.printf(webdata);
led2=0;wait(2);led2=1;
bufflen=200;count=0;
pc.printf("\n\n++++++++++ Ready ++++++++++\r\n\n");
esp.attach(&callback);
}
else{
pc.printf("\n++++++++++ ESP8266 error, check power/connections ++++++++++\r\n");
while(1){}
}
t2.reset();t2.start();beep();
}
// ESP Command data send
void SendCMD()
{
esp.printf("%s", cmdbuff);
}
// Large WEB buffer data send
void SendWEB()
{
int i=0;
if(esp.writeable()) {
while(webbuff[i]!='\0') {esp.putc(webbuff[i]);i++;}
}
}
// Get Cammand and ESP status replies
void getreply()
{
memset(replybuff, '\0', sizeof(replybuff));
t1.reset(); t1.start();replycount=0;
while(t1.read_ms()< timeout && replycount < getcount) {
if(esp.readable()) {
replybuff[replycount] = esp.getc();replycount++;
}
}
t1.stop();
}
// Analog in example
void getbattery()
{
AdcIn=BATin.read();
Ht = (AdcIn*3.328f*(R1+R2)/R2); // set the numeric to the exact MCU analog reference voltage for greater accuracy
sprintf(Vcc,"%2.3f",Ht);
}
// Temperature example
void gettemp()
{
temperature=thermom.GetTemperature(); // comment this out if no sensor connected
//temperature = 21.357; // include for dummy value
sprintf(Temp,"%3.3f",temperature);
}
// Get RTC time
void gettime()
{
time_t seconds = time(NULL);
strftime(timebuf,50,"%H:%M:%S %a %d %b %y", localtime(&seconds));
}
void beep()
{
speaker.period(1.0/2000); // 2000hz period
speaker = 0.5; //50% duty cycle - max volume
wait_ms(60);
speaker=0.0; // turn off audio
}
void setRTC()
{
t.tm_sec = (0); // 0-59
t.tm_min = (minute); // 0-59
t.tm_hour = (hour); // 0-23
t.tm_mday = (dayofmonth); // 1-31
t.tm_mon = (month-1); // 0-11 "0" = Jan, -1 added for Mbed RCT clock format
t.tm_year = ((year)+100); // year since 1900, current DCF year + 100 + 1900 = correct year
set_time(mktime(&t)); // set RTC clock
}