Test program for my Multi_WS2811 library that started out as a fork of heroic/WS2811. My library uses hardware DMA on the FRDM-KL25Z to drive up to 16 strings of WS2811 or WS2812 LEDs in parallel.
Dependencies: Multi_WS2811 mbed MMA8451Q
Fork of WS2811 by
NOTE: I have accidentally pushed changes for another fork of this program that I used in the recent Georgetown Carnival Power Tool Races. When I get some time, I will restore the test program to its original glory.
You can see my power tool racer (Nevermore's Revenge) here
This tests my FRDM-KL25Z multi-string WS2811/WS2812 library. It uses the accelerometer to change the rainbow phase on two strings of LEDs as well as the touch sense to change brightness.
A video of this program in operation is here.
Here is the library that I developed to run the LEDs:
Import libraryMulti_WS2811
Library allowing up to 16 strings of 60 WS2811 or WS2812 LEDs to be driven from a single FRDM-KL25Z board. Uses hardware DMA to do a full 800 KHz rate without much CPU burden.
main.cpp
- Committer:
- Ned Konz
- Date:
- 2015-06-12
- Revision:
- 34:cd56c00ed910
- Parent:
- 33:43b504e417e3
- Child:
- 36:9ee1ec2135d5
File content as of revision 34:cd56c00ed910:
#include "mbed.h" #include "Colors.h" #include "MMA8451Q.h" #define MMA8451_I2C_ADDRESS (0x1d<<1) #define INSTANTIATE_TEMPLATES 1 #include "WS2811.h" // I/O pin usage // PTD0 TPM0 CH0 monitor // PTD1 TPM0 CH1 monitor // PTD2 (D11) data output for strip# 1 // PTD3 (D12) data output for strip# 2 // PTA2 (D3) blinking eyes output (HI = ON) unsigned const DATA_OUT_PIN1 = 2; // PTD2 unsigned const DATA_OUT_PIN2 = 3; // PTD3 const unsigned MAX_LEDS_PER_STRIP = 32; // per LED: 3 * 20 mA = 60mA max // 60 LEDs: 60 * 60mA = 3600 mA max // 120 LEDs: 7200 mA max unsigned const nLEDs = MAX_LEDS_PER_STRIP; template class WS2811<MAX_LEDS_PER_STRIP>; typedef WS2811<MAX_LEDS_PER_STRIP> MyWS2811; MyWS2811 lightStrip1(nLEDs, DATA_OUT_PIN1); MyWS2811 lightStrip2(nLEDs, DATA_OUT_PIN2); Serial pc(USBTX, USBRX); MMA8451Q acc(PTE25, PTE24, MMA8451_I2C_ADDRESS); PwmOut rled(LED_RED); // max = 0.0 PwmOut gled(LED_GREEN); // max = 0.0 // LED_BLUE is on PTD1 PwmOut eyes(D3); // max = 1.0 float touchPercentage; float const minBrite = 0.2; float const maxBrite = 0.5; float brite; // @brief sets different colors in each of the LEDs of a strip // @param strip the light strip // @param sat saturation, 0.0 - 1.0 // @param brite brightness, 0.0 - 1.0 // @param hueShift shift, 0.0 - 1.0 is equivalent to 0 - 360 degrees static void showRainbow(MyWS2811 &strip, float sat, float brite, float hueShift) { unsigned nLEDs = strip.numPixels(); for (unsigned i = 0; i < nLEDs; i++) { uint8_t r, g, b; float hue = ((float)i / (float)nLEDs) + hueShift; HSBtoRGB(hue, sat, brite, &r, &g, &b); strip.setPixelColor(i, r, g, b); } strip.show(); } static void showSolidColor(MyWS2811 &strip, uint8_t r, uint8_t g, uint8_t b) { unsigned nLEDs = strip.numPixels(); for (unsigned i = 0; i < nLEDs; i++) { strip.setPixelColor(i, r, g, b); } strip.show(); } static void selfTest() { pc.printf("self test: "); pc.printf("LEDs ."); rled = 0.0; // red LED on wait(1.0); pc.printf("."); rled = 1.0; // red LED off, green LED on gled = 0.0; wait(1.0); pc.printf("."); gled = 1.0; // green LED off, eyes on eyes = 1.0; wait(1.0); pc.printf("."); eyes = 0.0; pc.printf(", "); pc.printf("light strips"); float rgb[4] = { 1.0, 0.0, 0.0, 0.0 }; for (int i = 0; i < 3; i++) { showSolidColor(lightStrip1, rgb[0], rgb[1], rgb[2]); showSolidColor(lightStrip2, rgb[1], rgb[2], rgb[0]); MyWS2811::startDMA(); if (i == 2) break; wait(1.0); rgb[3] = rgb[2]; rgb[2] = rgb[1]; rgb[1] = rgb[0]; rgb[0] = rgb[3]; pc.printf("."); } pc.printf("\r\n"); } int main(void) { pc.baud(115200); pc.printf("\r\nNevermore's Revenge!\r\ncompiled " __DATE__ ", " __TIME__ "\r\n"); lightStrip1.begin(); lightStrip2.begin(); rled = 1.0; gled = 1.0; eyes = 0.0; selfTest(); float xyz[3]; for (;;) { acc.getAccAllAxis(xyz); pc.printf("x: %f y: %f z: %f\r\n", xyz[0], xyz[1], xyz[2]); rled = 1.0 - fabs(xyz[0]); gled = 1.0 - fabs(xyz[1]); eyes = fabs(xyz[2]); showRainbow(lightStrip1, 1.0, maxBrite, fabs(xyz[0])); showRainbow(lightStrip2, 1.0, maxBrite, fabs(xyz[1])); MyWS2811::startDMA(); } }