Bhakti Kulkarni / Mbed 2 deprecated USB_Project_Device

This is a USB mouse(Device). The mouse positions can be changed with the potentiometers on the MBD

Dependencies:   C12832_lcd DebounceInterrupts USBDevice mbed

Fork of USBAbsoluteMouse by Adam Green

USB Mouse

Goal

To build a USB Mouse (Host and device) using two MBEDs and test the communication between them.

Details

This is a device part of the USB mouse Project. The USB mouse project uses two MBED boards.

• one as Device (This part)
• one as the USB Host programmed as USB mouse (http://mbed.org/users/bhakti08/code/USB_Project_Host/)

There is a bubble on the LCD of the Host MBED. The position of this bubble can be controlled using the potentiometers on the device MBED.

Pin Mappings

• Pot1 is used to control Y position of the bubble
• Pot2 is used to control X position of the bubble
• Right button on joystick is used to emulate the right click
• Left button on joystick is used to emulate the left click
• Center button of joystick is used to emulate the pressing of the wheel

Block Diagram/Connection diagram

Design Constraints

The output of the USB mouse(device) is adjusted according to the limits of the LCD on the other MBED board(the host). Due to this this mouse positions may be incorrect for any other sizes of the LCD or the Host computer.

Complete Testing(For both device and host)

Testing Device Specific

Device Code

/*****************************************************************************/
/*Function: This program is used to emulate a USB Mouse. The mouse position  */
/*          can be changed by the potentiometers. The output values of x and */
/*          y are modified to move the bubble on the LCD on another MBED     */
/*          acting as USB Host. The program for MBED USB Host can be found at*/
/*          http://mbed.org/users/bhakti08/code/USB_Project_Host/            */
/*Author:   Bhakti Kulkarni                                                  */
/*Date:     03/27/2014                                                       */
/*****************************************************************************/
#include <mbed.h>
#include <USBMouse.h>
#include "DebouncedIn.h"
#include "C12832_lcd.h"
#include "DebouncedInterrupt.h"

#define RANGE 0.02
#define INTERRUPT
#define X_MAX 120
#define Y_MAX 28
#define x_move 7
#define y_move 3

Serial pc(USBTX,USBRX);

DebouncedIn right_click(p13);      //Button enulating right click
DebouncedIn left_click(p16);       //Button emulating left click
DebouncedIn wheel(p14);            //Button emulating the wheel button
C12832_LCD lcd;
AnalogIn X_in(p20);               //Analog input to move bubble in x position
AnalogIn Y_in(p19);               //Analog input to move bubble in y position
 
USBMouse  Mouse;

int Xpos = 0;
int Ypos = 0;

/*****************************************************************************/ 
/*This is the main program. This reads the input from the potentiometers,    */
/*converts them into the values that are required for the lcd display        */
/*and then sends them as the mouse outputs.                                  */
/*****************************************************************************/ 
int main()
{
   float AinX_old = 0;
   float AinX_new;
   float AinY_old = 0;
   float AinY_new;
   while (true){
        if(left_click)
        {
            Mouse.click(MOUSE_LEFT);  //if left click is pressed,
                                      // emulate mouse left
        }
        if (right_click)
        {
            Mouse.click(MOUSE_RIGHT);  //if right click is pressed,
                                      // emulate mouse right
        }
        if (wheel)
        {
            Mouse.click(MOUSE_MIDDLE); //if wheel button is pressed,
                                      // emulate wheel button pressed
        }
        AinX_new = X_in.read();
        //check if the values are between the LCD values
        if (AinX_new >= AinX_old + RANGE){         
            if (Xpos < X_MAX)
                Xpos += x_move;
            else
                Xpos = Xpos;
            AinX_old = AinX_new;        
        }
        else if (AinX_new < AinX_old - RANGE){
            if (Xpos > 0)
                Xpos -= x_move;
            else
                Xpos = Xpos;
            AinX_old = AinX_new;        
        }
        else
            Xpos = Xpos;
            
        AinY_new = Y_in.read();
        if (AinY_new >= AinY_old + RANGE){
            if (Ypos < Y_MAX)
                Ypos += y_move;
            else
                Ypos = Ypos;
            AinY_old = AinY_new;        
        }
        else if (AinY_new < AinY_old - RANGE){
            if (Ypos > 0)
                Ypos -= y_move;
            else
                Ypos = Ypos;
            AinY_old = AinY_new;        
        }
        else
            Ypos = Ypos;
        Mouse.move(Xpos,Ypos);      //Send the values as the mouse output
    }
}

/*****************************************************************************/

Host code

/*****************************************************************************/
/*                                   USB MOUSE HOST                          */
/*Function: This program is used to connect the MBED USB mouse. The bubble   */
/*          on the LCD moves according to the input from the USB device.     */
/*          The program for the MBED USB Device can be found at following    */
/*          location:                                                        */
/*          <http://mbed.org/users/bhakti08/code/USB_Project_Device/>        */
/*Author:   Bhakti Kulkarni                                                  */
/*Date:     03/27/2014                                                       */
/*****************************************************************************/

#include "mbed.h"
#include "USBHostMouse.h"
#include "C12832_lcd.h"
#include "DebouncedInterrupt.h"
#include "DebouncedIn.h"

DigitalOut connect(LED4);     //LED to indicate USB Mouse connected
C12832_LCD lcd;
Serial pc(USBTX,USBRX);
BusOut button (LED1,LED2,LED3);   //LEDs for the Button pressed on Device

/*Global Variables to process the X abd Y values*/
int x_lcd=0,y_lcd=0;
int Xpos=0,Ypos=0;
uint8_t buttons; 
int8_t x; 
int8_t y; 
int8_t z;
uint8_t b;

/*****************************************************************************/
/*Function: OnMouseEvent()                                                   */
/*          This function is called whenever there is change in mouse data   */
/*          It copies the values of x,y and buttons from the device into     */
/*          variables that can be accessed by the main logic to move the     */
/*          bubble on the LCD                                                */
/*Inputs:   The x,y and button values from the Mouse.                        */
/*Outputs:  None.                                                            */
/*****************************************************************************/
void onMouseEvent(uint8_t buttons, int8_t x, int8_t y, int8_t z) {
    pc.printf("Mouse values: x= %d, y= %d\r\n",x,y);
    //pc.printf("Buttons are: %d/r/n",buttons);
    Xpos = x;
    Ypos = y;
    b = buttons;// & 0x03;
}
/*****************************************************************************/

/*****************************************************************************/
/*This thread is the mouse_task thread which will check for the USB Device   */
/*connectivity. If the device is not connected it will issue an error message*/
/*Once the device is connected, this thread will attach the mouse event      */
/*thread.                                                                    */
/*****************************************************************************/
void mouse_task(void const *) {
    
    USBHostMouse mouse;
    
    while(1) {
        
        // try to connect a USB mouse
        while(!mouse.connect()){
            lcd.cls();
            lcd.locate(0,0);
            lcd.printf("Connect the USB Mouse\n");
            Thread::wait(500);
        }
    
        // when connected, attach handler called on mouse event
        mouse.attachEvent(onMouseEvent);
        
        // wait until the mouse is disconnected
        while(mouse.connected()){
            lcd.cls();
            connect = 1;
            lcd.fillcircle(Xpos,Ypos, 2, 1); 
            wait(.05);
            lcd.fillcircle(Xpos,Ypos, 2, 1);
            pc.printf("%d\r\n",b); 
            button = b;
            Thread::wait(100);
        }
         connect= 0;
    }
}
/*****************************************************************************/

/*****************************************************************************/
/*This is the main thread. This will do nothing but initiate the mouse task  */
/*thread and then wait forever in the loop                                   */
/*****************************************************************************/ 
int main() {
    Thread mouseTask(mouse_task, NULL, osPriorityNormal, 256 * 4);
    while(1) {
        Thread::wait(osWaitForever);
    }
}
/*****************************************************************************/

Note:Two Programs should be downloaded on different MBEDs.