Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependents: Hobbyking_Cheetah_Compact Hobbyking_Cheetah_Compact_DRV8323_14bit Hobbyking_Cheetah_Compact_DRV8323_V51_201907 HKC_MiniCheetah ... more
Fork of mbed-dev by
Diff: targets/TARGET_TOSHIBA/TARGET_TMPM066/i2c_api.c
- Revision:
- 172:7d866c31b3c5
diff -r 89b338f31ef1 -r 7d866c31b3c5 targets/TARGET_TOSHIBA/TARGET_TMPM066/i2c_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_TOSHIBA/TARGET_TMPM066/i2c_api.c Thu Aug 31 17:27:04 2017 +0100
@@ -0,0 +1,343 @@
+/* mbed Microcontroller Library
+ * (C)Copyright TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION 2017 All rights reserved
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "i2c_api.h"
+#include "mbed_error.h"
+#include "PeripheralNames.h"
+#include "pinmap.h"
+
+#define I2C_NACK (0)
+#define I2C_ACK (1)
+#define I2C_NO_DATA (0)
+#define I2C_READ_ADDRESSED (1)
+#define I2C_WRITE_GENERAL (2)
+#define I2C_WRITE_ADDRESSED (3)
+#define SELF_ADDR (0xE0)
+#define I2C_TIMEOUT (100000)
+
+static const PinMap PinMap_I2C_SDA[] = {
+ {PC1, I2C_0, PIN_DATA(1, 2)},
+ {PG1, I2C_1, PIN_DATA(1, 2)},
+ {NC, NC, 0}
+};
+
+static const PinMap PinMap_I2C_SCL[] = {
+ {PC0, I2C_0, PIN_DATA(1, 2)},
+ {PG0, I2C_1, PIN_DATA(1, 2)},
+ {NC, NC, 0}
+};
+
+void I2C_ClearINTOutput(TSB_I2C_TypeDef * I2Cx);
+// Clock setting structure definition
+typedef struct {
+ uint32_t sck;
+ uint32_t prsck;
+} I2C_clock_setting_t;
+
+static const uint32_t I2C_SCK_DIVIDER_TBL[8] = {20, 24, 32, 48, 80, 144, 272, 528}; // SCK Divider value table
+static uint32_t start_flag = 0;
+I2C_clock_setting_t clk;
+I2C_State status;
+
+static int32_t wait_status(i2c_t *obj)
+{
+ volatile int32_t timeout = I2C_TIMEOUT;
+
+ while (I2C_GetINTI2CStatus(obj->i2c) == DISABLE) {
+ if ((timeout--) == 0) {
+ return (-1);
+ }
+ }
+ return (0);
+}
+
+// Initialize the I2C peripheral. It sets the default parameters for I2C
+void i2c_init(i2c_t *obj, PinName sda, PinName scl)
+{
+ MBED_ASSERT(obj != NULL);
+ I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
+ I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
+ I2CName i2c_name = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
+ MBED_ASSERT((int)i2c_name != NC);
+
+ switch (i2c_name) {
+ case I2C_0:
+ CG_SetFcPeriphA(CG_FC_PERIPH_I2C0, ENABLE);
+ obj->i2c = TSB_I2C0;
+ obj->IRQn = INTI2C0_IRQn;
+ break;
+ case I2C_1:
+ CG_SetFcPeriphB(CG_FC_PERIPH_I2C1, ENABLE);
+ obj->i2c = TSB_I2C1;
+ obj->IRQn = INTI2C1_IRQn;
+ break;
+ default:
+ error("I2C is not available");
+ break;
+ }
+
+ pinmap_pinout(sda, PinMap_I2C_SDA);
+ pin_mode(sda, OpenDrain);
+ pin_mode(sda, PullUp);
+
+ pinmap_pinout(scl, PinMap_I2C_SCL);
+ pin_mode(scl, OpenDrain);
+ pin_mode(scl, PullUp);
+
+ NVIC_DisableIRQ(obj->IRQn);
+
+ i2c_reset(obj);
+ i2c_frequency(obj, 100000);
+}
+
+// Configure the I2C frequency
+void i2c_frequency(i2c_t *obj, int hz)
+{
+ uint64_t sck, tmp_sck;
+ uint64_t prsck, tmp_prsck;
+ uint64_t fscl, tmp_fscl;
+ uint64_t fx;
+
+ SystemCoreClockUpdate();
+
+ if (hz <= 1000000) {
+ sck = tmp_sck = 0;
+ prsck = tmp_prsck = 1;
+ fscl = tmp_fscl = 0;
+ for (prsck = 1; prsck <= 32; prsck++) {
+ fx = ((uint64_t)SystemCoreClock / prsck);
+ if ((fx < 40000000U) && (fx > 6666666U)) {
+ for (sck = 0; sck <= 7; sck++) {
+ fscl = (fx / (uint64_t)I2C_SCK_DIVIDER_TBL[sck]);
+ if ((fscl <= (uint64_t)hz) && (fscl > tmp_fscl)) {
+ tmp_fscl = fscl;
+ tmp_sck = sck;
+ tmp_prsck = (prsck < 32)? prsck: 0;
+ }
+ }
+ }
+ }
+ clk.sck = (uint32_t)tmp_sck;
+ clk.prsck = (tmp_prsck < 32) ? (uint32_t)(tmp_prsck) : 0;
+ }
+ obj->myi2c.I2CSelfAddr = SELF_ADDR;
+ obj->myi2c.I2CDataLen = I2C_DATA_LEN_8;
+ obj->myi2c.I2CACKState = ENABLE;
+ obj->myi2c.I2CClkDiv = clk.sck;
+ obj->myi2c.PrescalerClkDiv = clk.prsck;
+
+ I2C_Init(obj->i2c, &obj->myi2c);
+ NVIC_DisableIRQ(obj->IRQn);
+}
+
+int i2c_start(i2c_t *obj)
+{
+ start_flag = 1;
+ return 0;
+}
+
+int i2c_stop(i2c_t *obj)
+{
+ I2C_GenerateStop(obj->i2c);
+ return 0;
+}
+
+void i2c_reset(i2c_t *obj)
+{
+ I2C_SWReset(obj->i2c);
+}
+
+int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
+{
+ int32_t result = 0;
+ int32_t count = 0;
+
+ if (length > 0) {
+ start_flag = 1; // Start Condition
+ if (i2c_byte_write(obj, (int32_t)((uint32_t)address | 1U)) == I2C_ACK) {
+ while (count < length) {
+ int32_t pdata = i2c_byte_read(obj, ((count < (length - 1)) ? 0 : 1));
+ if (pdata < 0) {
+ break;
+ }
+ data[count++] = (uint8_t)pdata;
+ }
+ result = count;
+ } else {
+ stop = 1;
+ result = I2C_ERROR_NO_SLAVE;
+ }
+
+ if (stop) { // Stop Condition
+ i2c_stop(obj);
+ }
+ }
+ return (result);
+}
+
+int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) // Blocking sending data
+{
+ int32_t result = 0;
+ int32_t count = 0;
+
+ start_flag = 1; // Start Condition
+ if (i2c_byte_write(obj, address) == I2C_ACK) {
+ while (count < length) {
+ if (i2c_byte_write(obj, (int32_t)data[count++]) < I2C_ACK) {
+ break;
+ }
+ }
+ result = count;
+ } else {
+ stop = 1;
+ result = I2C_ERROR_NO_SLAVE;
+ }
+
+ if (stop) { // Stop Condition
+ i2c_stop(obj);
+ }
+ return (result);
+}
+
+int i2c_byte_read(i2c_t *obj, int last)
+{
+ int32_t result;
+
+ I2C_ClearINTOutput(obj->i2c);
+
+ if (last) {
+ I2C_SelectACKoutput(obj->i2c, ENABLE);
+ } else {
+ I2C_SelectACKoutput(obj->i2c, DISABLE);
+ }
+ I2C_SetSendData(obj->i2c, 0x00);
+
+ if (wait_status(obj) < 0) {
+ result = -1;
+ } else {
+ result = (int32_t)I2C_GetReceiveData(obj->i2c);
+ }
+ return (result);
+}
+
+void I2C_Start_Condition(i2c_t *p_obj, uint32_t data)
+{
+ status = I2C_GetState(p_obj->i2c);
+ if (status.Bit.BusState) {
+ I2C_SetRepeatStart(p_obj->i2c, ENABLE);
+ }
+ I2C_SetSendData(p_obj->i2c, (uint32_t)data);
+ I2C_GenerateStart(p_obj->i2c);
+}
+
+int i2c_byte_write(i2c_t *obj, int data)
+{
+ int32_t result;
+
+ I2C_ClearINTOutput(obj->i2c);
+
+ if (start_flag == 1) {
+ I2C_Start_Condition(obj, (uint32_t)data);
+ start_flag = 0;
+ } else {
+ I2C_SetSendData(obj->i2c, (uint32_t)data);
+ }
+
+ if (wait_status(obj) < 0) {
+ return (-1);
+ }
+
+ status = I2C_GetState(obj->i2c);
+ if (!status.Bit.LastRxBit) {
+ result = 1;
+ } else {
+ result = 0;
+ }
+ return (result);
+}
+
+void i2c_slave_mode(i2c_t *obj, int enable_slave)
+{
+ i2c_reset(obj);
+
+ obj->myi2c.I2CDataLen = I2C_DATA_LEN_8;
+ obj->myi2c.I2CACKState = ENABLE;
+ obj->myi2c.I2CClkDiv = clk.sck;
+ obj->myi2c.PrescalerClkDiv = clk.prsck;
+
+ if (enable_slave) {
+ obj->myi2c.I2CSelfAddr = obj->address;
+ I2C_SetINTI2CReq(obj->i2c, ENABLE);
+ } else {
+ obj->myi2c.I2CSelfAddr = SELF_ADDR;
+ NVIC_DisableIRQ(obj->IRQn);
+ I2C_ClearINTOutput(obj->i2c);
+ }
+ I2C_Init(obj->i2c, &obj->myi2c);
+}
+
+int i2c_slave_receive(i2c_t *obj)
+{
+ int32_t result = I2C_NO_DATA;
+
+ if ((I2C_GetINTI2CStatus(obj->i2c)) && (I2C_GetSlaveAddrMatchState(obj->i2c))) {
+ status = I2C_GetState(obj->i2c);
+ if (!status.Bit.TRx) {
+ result = I2C_WRITE_ADDRESSED;
+ } else {
+ result = I2C_READ_ADDRESSED;
+ }
+ }
+ return (result);
+}
+
+int i2c_slave_read(i2c_t *obj, char *data, int length)
+{
+ int32_t count = 0;
+
+ while (count < length) {
+ int32_t pdata = i2c_byte_read(obj, ((count < (length - 1))? 0: 1));
+ status = I2C_GetState(obj->i2c);
+ if (status.Bit.TRx) {
+ return (count);
+ } else {
+ if (pdata < 0) {
+ break;
+ }
+ data[count++] = (uint8_t)pdata;
+ }
+ }
+ i2c_slave_mode(obj, 1);
+ return (count);
+}
+
+int i2c_slave_write(i2c_t *obj, const char *data, int length)
+{
+ int32_t count = 0;
+
+ while (count < length) {
+ if (i2c_byte_write(obj, (int32_t)data[count++]) < I2C_ACK) {
+ break;
+ }
+ }
+ i2c_slave_mode(obj, 1);
+ return (count);
+}
+
+void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
+{
+ obj->address = address & 0xFE;
+ i2c_slave_mode(obj, 1);
+}
