![](/media/cache/profiles/951e5e38cb91253e90bcae5ccd7baf3c.jpg.50x50_q85.jpg)
I have ported my old project “pNesX” game console emulator to the nucleo.
Dependencies: SDFileSystem mbed
Intro
I have ported my old project “pNesX” to the STM32 Nucleo. The pNesX is a NES emulator for the PlayStation that I have created 16 years ago!
Emulation part was almost without change, the sound part was newly added.
Parts
STM32 Nucleo F446RE |
QVGA 2.2 TFT SPI (with the SD card slot) |
Audio jack(TS or TRS) |
USB Connector |
Register 100k, 10k, 4.7k, 100 |
Capacitor 0.01uF, 2.2uF |
Breadboard |
Wires |
Computer Speakers |
USB GamePad |
Wiring diagram
TFT J2 | Nucleo |
---|---|
VCC | 3V3 |
GND | GND |
CS | PB_5(D4) |
Reset | PA_10(D2) Pull Up(100k) |
D/C | PA_8(D7) |
MOSI | PA_7(D11) |
SCK | PA_5(D13) |
LED | LED-100ohm-3V3 |
MISO | PA_6(D12) |
TFT J4 | Nucleo |
---|---|
SD_CS | PA_9 |
SD_MOSI | PB_15 |
SD_MISO | PB_14 |
SD_SCK | PB_13 |
Audio | Nucleo |
---|---|
TIP | PA_4(A2) |
USB con. | Nucleo |
---|---|
GND | GND |
+ | PA_12 |
- | PA_11 |
5V | 5V |
Limitations
- Since the rest of the RAM is about 50kbyte, maximum capacity of the game ROM is about 50kbyte.
- The length of the file name up to 32 characters.
- The number of files in the folder is up to 100.
Used Library
- SDFileSystem by Neil Thiessen
- F401RE-USBHost by Norimasa Okamoto
- USBHostGamepad by Yuuichi Akagawa
TFT/spidma.h@0:3dac1f1bc9e0, 2016-04-03 (annotated)
- Committer:
- beaglescout007
- Date:
- Sun Apr 03 07:45:29 2016 +0000
- Revision:
- 0:3dac1f1bc9e0
Release
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
beaglescout007 | 0:3dac1f1bc9e0 | 1 | /*===================================================================*/ |
beaglescout007 | 0:3dac1f1bc9e0 | 2 | /* */ |
beaglescout007 | 0:3dac1f1bc9e0 | 3 | /* spidma.h : SPI DMA function header */ |
beaglescout007 | 0:3dac1f1bc9e0 | 4 | /* */ |
beaglescout007 | 0:3dac1f1bc9e0 | 5 | /* 2016/1/20 Racoon */ |
beaglescout007 | 0:3dac1f1bc9e0 | 6 | /* */ |
beaglescout007 | 0:3dac1f1bc9e0 | 7 | /*===================================================================*/ |
beaglescout007 | 0:3dac1f1bc9e0 | 8 | |
beaglescout007 | 0:3dac1f1bc9e0 | 9 | #ifndef SPIDMA_H_INCLUDED |
beaglescout007 | 0:3dac1f1bc9e0 | 10 | #define SPIDMA_H_INCLUDED |
beaglescout007 | 0:3dac1f1bc9e0 | 11 | |
beaglescout007 | 0:3dac1f1bc9e0 | 12 | void spi_init(); |
beaglescout007 | 0:3dac1f1bc9e0 | 13 | void spi_write(uint8_t data); |
beaglescout007 | 0:3dac1f1bc9e0 | 14 | void spi_writew(uint16_t data); |
beaglescout007 | 0:3dac1f1bc9e0 | 15 | |
beaglescout007 | 0:3dac1f1bc9e0 | 16 | extern SPI_HandleTypeDef SpiHandle; |
beaglescout007 | 0:3dac1f1bc9e0 | 17 | |
beaglescout007 | 0:3dac1f1bc9e0 | 18 | #endif |
beaglescout007 | 0:3dac1f1bc9e0 | 19 |