I have ported my old project “pNesX” game console emulator to the nucleo.
Dependencies: SDFileSystem mbed
Intro
I have ported my old project “pNesX” to the STM32 Nucleo. The pNesX is a NES emulator for the PlayStation that I have created 16 years ago!
Emulation part was almost without change, the sound part was newly added.
Parts
STM32 Nucleo F446RE |
QVGA 2.2 TFT SPI (with the SD card slot) |
Audio jack(TS or TRS) |
USB Connector |
Register 100k, 10k, 4.7k, 100 |
Capacitor 0.01uF, 2.2uF |
Breadboard |
Wires |
Computer Speakers |
USB GamePad |
Wiring diagram
TFT J2 | Nucleo |
---|---|
VCC | 3V3 |
GND | GND |
CS | PB_5(D4) |
Reset | PA_10(D2) Pull Up(100k) |
D/C | PA_8(D7) |
MOSI | PA_7(D11) |
SCK | PA_5(D13) |
LED | LED-100ohm-3V3 |
MISO | PA_6(D12) |
TFT J4 | Nucleo |
---|---|
SD_CS | PA_9 |
SD_MOSI | PB_15 |
SD_MISO | PB_14 |
SD_SCK | PB_13 |
Audio | Nucleo |
---|---|
TIP | PA_4(A2) |
USB con. | Nucleo |
---|---|
GND | GND |
+ | PA_12 |
- | PA_11 |
5V | 5V |
Limitations
- Since the rest of the RAM is about 50kbyte, maximum capacity of the game ROM is about 50kbyte.
- The length of the file name up to 32 characters.
- The number of files in the folder is up to 100.
Used Library
- SDFileSystem by Neil Thiessen
- F401RE-USBHost by Norimasa Okamoto
- USBHostGamepad by Yuuichi Akagawa
pNesX_Mapper.h
- Committer:
- beaglescout007
- Date:
- 2016-04-03
- Revision:
- 0:3dac1f1bc9e0
File content as of revision 0:3dac1f1bc9e0:
/*===================================================================*/ /* */ /* pNesX_Mapper.h : pNesX Mapper Function */ /* */ /* 1999/11/03 Racoon New preparation */ /* */ /*===================================================================*/ #ifndef PNESX_MAPPER_H_INCLUDED #define PNESX_MAPPER_H_INCLUDED /*-------------------------------------------------------------------*/ /* Include files */ /*-------------------------------------------------------------------*/ #include "pNesX_Types.h" /*-------------------------------------------------------------------*/ /* Macros */ /*-------------------------------------------------------------------*/ /* The address of 8Kbytes unit of the ROM */ #define ROMPAGE(a) &ROM[ (a) * 0x2000 ] /* From behind the ROM, the address of 8kbytes unit */ #define ROMLASTPAGE(a) &ROM[ NesHeader.byRomSize * 0x4000 - ( (a) + 1 ) * 0x2000 ] /* The address of 1Kbytes unit of the VROM */ #define VROMPAGE(a) &VROM[ (a) * 0x400 ] /*-------------------------------------------------------------------*/ /* Table of Mapper initialize function */ /*-------------------------------------------------------------------*/ struct MapperTable_tag { int nMapperNo; void (*pMapperInit)(); }; extern struct MapperTable_tag MapperTable[]; /*-------------------------------------------------------------------*/ /* Function prototypes */ /*-------------------------------------------------------------------*/ void Map0_Init(); void Map0_Write( WORD wAddr, BYTE byData ); void Map0_VSync(); void Map0_HSync(); void Map1_Init(); void Map1_Write( WORD wAddr, BYTE byData ); void Map2_Init(); void Map2_Write( WORD wAddr, BYTE byData ); void Map3_Init(); void Map3_Write( WORD wAddr, BYTE byData ); void Map4_Init(); void Map4_Write( WORD wAddr, BYTE byData ); void Map4_VSync(); void Map4_HSync(); #endif /* !PNESX_MAPPER_H_INCLUDED */