File content as of revision 47:54fafe151669:

#include "pdb.h"

Serial debug2(USBTX,USBRX);

void pdb_init() {
    
    // initialize the Programmable Delay Block
    
    // turn on the clock to the PDB
    SIM->SCGC6 |= SIM_SCGC6_PDB_MASK;
    
    // set ADC trigger to PDB0
    SIM_SOPT7 = SIM_SOPT7_ADC0TRGSEL(0); 
    
    // Configure the Peripheral Delay Block (PDB):
    PDB0_IDLY = 0x01;   // need to trigger interrupt every counter reset which happens when modulus reached
    PDB0_MOD = 0xffffffff;
    PDB0_CH0DLY0 = 0xa0;
    PDB0_CH0DLY1 = 0xa0;
    PDB0_CH1DLY0 = 0x00;
    PDB0_CH1DLY1 = 0x00;
    PDB0_CH0C1 = PDB_C1_EN(0x01) | PDB_C1_TOS(0x01) | PDB_C1_EN(0x02) | PDB_C1_TOS(0x02) ; // channel 0 pretrigger 0 and 1 enabled and delayed
    PDB0_CH1C1 = PDB_C1_EN(0x01) | PDB_C1_TOS(0x01) | PDB_C1_EN(0x02) | PDB_C1_TOS(0x02) ; // channel 1 pretrigger 0 and 1 enabled and delayed
    
    // Setup Staus and Control Register
    PDB0_SC = 0; // clear register
    PDB0_SC = PDB_SC_PRESCALER(0) // Slow down the period of the PDB for testing
            | PDB_SC_TRGSEL(0xf)  // Trigger source is Software Trigger to be invoked in this file
             | PDB_SC_PDBEN_MASK  // PDB enabled
             | PDB_SC_PDBIE_MASK  // PDB Interrupt Enable
             | PDB_SC_MULT(0)     // Multiplication factor 20 for the prescale divider for the counter clock
             | PDB_SC_CONT_MASK   // Contintuous, rather than one-shot, mode
             | PDB_SC_LDOK_MASK;  // Need to ok the loading or it will not load certain regsiters!
    //PDB0_SC &= ~PDB_SC_CONT_MASK;  // enable one-shot mode for debugging.
    
    debug2.printf("PDB0_SC:       %08x\r\n",PDB0_SC);
    debug2.printf("PDB0_MOD:      %08x\r\n",PDB0_MOD);
    debug2.printf("PDB0_CNT:      %08x\r\n",PDB0_CNT);
    debug2.printf("PDB0_IDLY:     %08x\r\n",PDB0_IDLY);
    debug2.printf("PDB0_CH0C1:    %08x\r\n",PDB0_CH0C1);
    debug2.printf("PDB0_CH0S:     %08x\r\n",PDB0_CH0S);
    debug2.printf("PDB0_CH0DLY0:  %08x\r\n",PDB0_CH0DLY0);
    debug2.printf("PDB0_CH0DLY1:  %08x\r\n",PDB0_CH0DLY1);
    debug2.printf("PDB0_CH1C1:    %08x\r\n",PDB0_CH1C1);
    debug2.printf("PDB0_CH1S:     %08x\r\n",PDB0_CH1S);
    debug2.printf("PDB0_CH1DLY0:  %08x\r\n",PDB0_CH1DLY0);
    debug2.printf("PDB0_CH1DLY1:  %08x\r\n",PDB0_CH1DLY1);
    debug2.printf("PDB0_DACINTC0: %08x\r\n",PDB0_DACINTC0);
    debug2.printf("PDB0_DACINT0:  %08x\r\n",PDB0_DACINT0);
    debug2.printf("PDB0_DACINTC1: %08x\r\n",PDB0_DACINTC1);
    debug2.printf("PDB0_DACINT1:  %08x\r\n",PDB0_DACINT1);
    debug2.printf("PDB0_POEN:     %08x\r\n",PDB0_POEN);
    debug2.printf("PDB0_PO0DLY:   %08x\r\n",PDB0_PO0DLY);
    debug2.printf("PDB0_PO1DLY:   %08x\r\n",PDB0_PO1DLY);
    debug2.printf("PDB0_PO2DLY:   %08x\r\n\n",PDB0_PO2DLY);
    
    //NVIC_SetVector(PDB0_IRQn, (uint32_t)&PDB0_IRQHandler);
    //NVIC_EnableIRQ(PDB0_IRQn);
}


void PDB0_IRQHandler() {
    //switcher = !switcher;

}


void pdb_start() {
    PDB0_SC |= PDB_SC_PDBEN_MASK;  // PDB enabled
    PDB0_SC |= PDB_SC_SWTRIG_MASK; // enable software trigger (start the PDB)
}

void pdb_stop() {
    PDB0_SC &= ~PDB_SC_PDBEN_MASK;  // PDB disabled
}