Diff: Components/l6470/L6470.cpp

Revision:

22:ba7f4131a5e0

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/l6470/L6470.cpp	Fri Mar 10 11:09:21 2017 +0100
@@ -0,0 +1,1460 @@
+/**
+ ******************************************************************************
+ * @file       l6470_class.cpp
+ * @date       01/10/2014 12:00:00
+ * @brief      This file provides set of firmware functions to manage the
+ *             L6470.
+ ******************************************************************************
+ *
+ * COPYRIGHT(c) 2014 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *   1. Redistributions of source code must retain the above copyright notice,
+ *      this list of conditions and the following disclaimer.
+ *   2. Redistributions in binary form must reproduce the above copyright notice,
+ *      this list of conditions and the following disclaimer in the documentation
+ *      and/or other materials provided with the distribution.
+ *   3. Neither the name of STMicroelectronics nor the names of its contributors
+ *      may be used to endorse or promote products derived from this software
+ *      without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/* Generated with STM32CubeTOO -----------------------------------------------*/
+
+
+/* Revision ------------------------------------------------------------------*/
+/*
+    Repository:       http://svn.x-nucleodev.codex.cro.st.com/svnroot/X-NucleoDev
+    Branch/Trunk/Tag: trunk
+    Based on:         X-CUBE-SPN2/trunk/Drivers/BSP/Components/L6470/L6470.c
+    Revision:         0
+*/
+
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "l6470.h"
+
+
+/* Variables -----------------------------------------------------------------*/
+
+/* Number of instantiated devices on an expansion board. */
+uint8_t L6470::number_of_devices = 0;
+
+/* SPI Transmission for Daisy-Chain Configuration. */
+eFlagStatus_t L6470::L6470_DaisyChain_HalfPrepared;
+sL6470_AppCmdPkg_t L6470::L6470_AppCmdPkg[L6470DAISYCHAINSIZE];
+uint8_t L6470::L6470_DaisyChainSpiTxStruct[L6470MAXSPICMDBYTESIZE][L6470DAISYCHAINSIZE];
+uint8_t L6470::L6470_DaisyChainSpiRxStruct[L6470MAXSPICMDBYTESIZE][L6470DAISYCHAINSIZE];
+
+/**
+  * @brief Array whose elements are a structure in which store information about
+  *        the L6470 Registers (the address, the names, the length in bits, the
+  *        reset value)
+  */
+const sL6470_Register_t L6470::_L6470_Register[L6470REGIDSIZE] = {
+  {0x01 , "ABS_POS",   22, 3, 0x000000},  //!< Current position
+  {0x02 , "EL_POS",     9, 2, 0x000},     //!< Electrical position
+  {0x03 , "MARK",      22, 3, 0x000000},  //!< Mark position
+  {0x04 , "SPEED",     20, 3, 0x0000},    //!< Current speed
+  {0x05 , "ACC",       12, 2, 0x08A},     //!< Acceleration
+  {0x06 , "DEC",       12, 2, 0x08A},     //!< Deceleration
+  {0x07 , "MAX_SPEED", 10, 2, 0x041},     //!< Maximum speed
+  {0x08 , "MIN_SPEED", 13, 2, 0x000},     //!< Minimum speed
+  {0x15 , "FS_SPD",    10, 2, 0x027},     //!< Full-step speed
+  {0x09 , "KVAL_HOLD",  8, 1, 0x29},      //!< Holding KVAL
+  {0x0A , "KVAL_RUN",   8, 1, 0x29},      //!< Constant speed KVAL
+  {0x0B , "KVAL_ACC",   8, 1, 0x29},      //!< Acceleration starting KVAL
+  {0x0C , "KVAL_DEC",   8, 1, 0x29},      //!< Deceleration starting KVAL
+  {0x0D , "INT_SPEED", 14, 2, 0x0408},    //!< Intersect speed
+  {0x0E , "ST_SLP",     8, 1, 0x19},      //!< Start slope
+  {0x0F , "FN_SLP_ACC", 8, 1, 0x29},      //!< Acceleration final slope
+  {0x10 , "FN_SLP_DEC", 8, 1, 0x29},      //!< Deceleration final slope
+  {0x11 , "K_THERM",    4, 1, 0x0},       //!< Thermal compensation factor
+  {0x12 , "ADC_OUT",    5, 1, 0x00},      //!< ADC output, (the reset value is according to startup conditions)
+  {0x13 , "OCD_TH",     4, 1, 0x8},       //!< OCD threshold
+  {0x14 , "STALL_TH",   7, 1, 0x40},      //!< STALL threshold
+  {0x16 , "STEP_MODE",  8, 1, 0x7},       //!< Step mode
+  {0x17 , "ALARM_EN",   8, 1, 0xFF},      //!< Alarm enable
+  {0x18 , "CONFIG",    16, 2, 0x2E88},    //!< IC configuration
+  {0x19 , "STATUS",    16, 2, 0x0000}     //!< Status, (the reset value is according to startup conditions)
+};
+
+/**
+  * @brief Array whose elements are a structure in which store information about
+  *        the L6470 Application Commands (the mnemonic name, the number of
+  *        needed parameters, the related funtion to call)
+  */
+const sL6470_ApplicationCommand_t L6470::_L6470_ApplicationCommand[L6470APPCMDIDSIZE] =  {
+  {"NOP",         0x00, 0},
+  {"SETPARAM",    0x00, 2},
+  {"GETPARAM",    0x20, 1},
+  {"RUN",         0x50, 2},
+  {"STEPCLOCK",   0x58, 1},
+  {"MOVE",        0x40, 2},
+  {"GOTO",        0x60, 1},
+  {"GOTO_DIR",    0x68, 2},
+  {"GOUNTIL",     0x82, 3},
+  {"RELEASESW",   0x92, 2},
+  {"GOHOME",      0x70, 0},
+  {"GOMARK",      0x78, 0},
+  {"RESETPOS",    0xD8, 0},
+  {"RESETDEVICE", 0xC0, 0},
+  {"SOFTSTOP",    0xB0, 0},
+  {"HARDSTOP",    0xB8, 0},
+  {"SOFTHIZ",     0xA0, 0},
+  {"HARDHIZ",     0xA8, 0},
+  {"GETSTATUS",   0xD0, 0}
+};
+
+/**
+  * @brief The mnemonic names for the L6470 direction
+  */
+const sL6470_Direction_t L6470::_L6470_Direction[L6470DIRIDSIZE] = {
+  {"REV", 0x00},  //!< Reverse direction
+  {"FWD", 0x01}   //!< Forward direction
+};
+
+/**
+  * @brief Action taken about ABS_POS register
+  */
+const sL6470_ACT_t L6470::_L6470_ACT[L6470ACTIDSIZE] = {
+  {"RST", 0x00},  //!< ABS_POS register is reset
+  {"CPY", 0x01}   //!< ABS_POS register value is copied into the MARK register
+};
+
+/* End of L6470_Private_Constants */
+
+/**
+  * @defgroup   L6470_Private_Variables
+  * @brief      L6470 Private Variables.
+  * @{
+  */
+
+/* End of L6470_Private_Variables */
+
+
+/**
+  * @addtogroup L6470_Private_Functions
+  * @{
+  */
+
+
+/* Methods -------------------------------------------------------------------*/
+
+/**
+  * @brief  Reset the structure used to store the identifier of the L6470
+  *         application command and its the needed parameters.
+  * @param  pL6470_AppCmdPkg   The structure to be reset.
+  */
+void L6470::L6470_ResetAppCmdPkg(sL6470_AppCmdPkg_t* pL6470_AppCmdPkg)
+{
+  uint8_t id;
+  
+  for(id=0; id<L6470DAISYCHAINSIZE; id++)
+  {
+    (pL6470_AppCmdPkg+id)->L6470_AppCmdId=(eL6470_AppCmdId_t)0;
+    (pL6470_AppCmdPkg+id)->p1=0;
+    (pL6470_AppCmdPkg+id)->p2=0;
+    (pL6470_AppCmdPkg+id)->p3=0;
+  }
+}
+
+/**
+  * @brief  Fill the structure used to store the identifier of the L6470
+  *         application command and its the needed parameters.
+  * @param  L6470_Id          The identifier of the L6470 target inside the daisy chain.
+  * @param  pL6470_AppCmdPkg  The structure to be filled.
+  * @param  L6470_AppCmdId    The identifier of the L6470 application command to be sent.
+  * @param  p1                The 1st parameter (if it is not needed it will be not considered).
+  * @param  p2                The 2nd parameter (if it is not needed it will be not considered).
+  * @param  p3                The 3rd parameter (if it is not needed it will be not considered).
+  */
+void L6470::L6470_FillAppCmdPkg(sL6470_AppCmdPkg_t* pL6470_AppCmdPkg, eL6470_AppCmdId_t L6470_AppCmdId, uint32_t p1, uint32_t p2, uint32_t p3)
+{
+  (pL6470_AppCmdPkg+L6470_Id)->L6470_AppCmdId = L6470_AppCmdId;
+  (pL6470_AppCmdPkg+L6470_Id)->p1 = p1;
+  (pL6470_AppCmdPkg+L6470_Id)->p2 = p2;
+  (pL6470_AppCmdPkg+L6470_Id)->p3 = p3;
+}
+
+/**
+  * @brief  This function will fill the column of the L6470_AppCmdPkg related
+  *         the L6470 to be addressed inside the daisy chain.
+  *
+  * @param  L6470_Id          The identifier of the L6470 target inside the daisy chain.
+  * @param  pL6470_AppCmdPkg  Pointer to the sL6470_AppCmdPkg_t to be filled.
+  * @param  L6470_AppCmdId    The identifier of the L6470 application command to be sent.
+  * @param  p1                The 1st parameter (if it is not needed it will be not considered).
+  * @param  p2                The 2nd parameter (if it is not needed it will be not considered).
+  * @param  p3                The 3rd parameter (if it is not needed it will be not considered).
+  */
+void L6470::L6470_PrepareAppCmdPkg(sL6470_AppCmdPkg_t* pL6470_AppCmdPkg, eL6470_AppCmdId_t L6470_AppCmdId, uint32_t p1, uint32_t p2, uint32_t p3)
+{
+  if(!L6470_DaisyChain_HalfPrepared)
+  {
+    L6470_DaisyChain_HalfPrepared = ONE_F; /* To avoid to delete the previous entered command */
+    L6470_ResetAppCmdPkg(pL6470_AppCmdPkg);
+  }
+  
+  L6470_FillAppCmdPkg(pL6470_AppCmdPkg, L6470_AppCmdId, p1, p2, p3);
+}
+
+/**
+  * @brief  This function will translate the data inside the L6470_AppCmdPkg into
+  *         the right data to be sent via SPI to the L6470 daisy chain.
+  *
+  * @param  pL6470_AppCmdPkg              Pointer to the sL6470_AppCmdPkg_t to be filled.
+  * @param  pL6470_DaisyChainSpiTxStruct  Pointer to the structure used by SPI to send the commands.
+  */
+void L6470::L6470_PrepareDaisyChainCommand(sL6470_AppCmdPkg_t* pL6470_AppCmdPkg, uint8_t* pL6470_DaisyChainSpiTxStruct)
+{
+  uint8_t PkgId;
+  uint8_t PARAMLengthBytes; /* The number of bytes related to the numeric value for the addressed register */
+  uint8_t spibyte;
+  
+  /* Reset the structure used to send the command to the L6470 Daisy Chain through the SPI */
+  uint8_t i = 0;
+  for(spibyte=0;spibyte<L6470MAXSPICMDBYTESIZE;spibyte++)
+    for(PkgId=0; PkgId<L6470DAISYCHAINSIZE; PkgId++)
+      *(pL6470_DaisyChainSpiTxStruct+(i++)) = 0x00;
+
+  for(PkgId=0; PkgId<L6470DAISYCHAINSIZE; PkgId++)
+  {
+    /* Build the 1st bytes to transmit with the binary code of the command */
+    *(pL6470_DaisyChainSpiTxStruct+((0*L6470DAISYCHAINSIZE)+PkgId)) = (L6470_ApplicationCommand[(pL6470_AppCmdPkg+PkgId)->L6470_AppCmdId].BinaryCode);
+    
+    /* Perform the related L6470_AppCmdId */
+    switch((pL6470_AppCmdPkg+PkgId)->L6470_AppCmdId)
+    {
+    case L6470_NOP_ID:
+      break;
+    case L6470_SETPARAM_ID:
+      /* Build the 1st bytes to transmit (PARAM) */
+      *(pL6470_DaisyChainSpiTxStruct+((0*L6470DAISYCHAINSIZE)+PkgId)) |= (L6470_Register[((pL6470_AppCmdPkg+PkgId)->p1)].Address);
+      
+      /* The length, in byte, of this register (PARAM) is... */
+      PARAMLengthBytes = L6470_Register[((pL6470_AppCmdPkg+PkgId)->p1)].LengthByte;
+      
+      /* Build the others bytes to transmit (VALUE) */
+      for (spibyte=1; spibyte<(PARAMLengthBytes+1); spibyte++)
+      {
+        *(pL6470_DaisyChainSpiTxStruct+((spibyte*L6470DAISYCHAINSIZE)+PkgId)) = (uint8_t)(((pL6470_AppCmdPkg+PkgId)->p2) >> (8*(PARAMLengthBytes-spibyte)));
+      }
+      break;
+    case L6470_GETPARAM_ID:
+      /* Build the 1st bytes to transmit (PARAM) */
+      *(pL6470_DaisyChainSpiTxStruct+((0*L6470DAISYCHAINSIZE)+PkgId)) |= (L6470_Register[((pL6470_AppCmdPkg+PkgId)->p1)].Address);
+      break;
+    case L6470_RUN_ID:
+      /* Build the 1st bytes to transmit (DIR) */
+      *(pL6470_DaisyChainSpiTxStruct+((0*L6470DAISYCHAINSIZE)+PkgId)) |= (L6470_Direction[((pL6470_AppCmdPkg+PkgId)->p1)].BinaryCode);
+      
+      /* Build the others bytes to transmit (SPD) */
+      for (spibyte=1; spibyte<(3+1); spibyte++)
+      {
+        *(pL6470_DaisyChainSpiTxStruct+((spibyte*L6470DAISYCHAINSIZE)+PkgId)) = (uint8_t)(((pL6470_AppCmdPkg+PkgId)->p2) >> (8*(3-spibyte)));
+      }
+      break;
+    case L6470_STEPCLOCK_ID:
+      /* Build the 1st bytes to transmit (DIR) */
+      *(pL6470_DaisyChainSpiTxStruct+((0*L6470DAISYCHAINSIZE)+PkgId)) |= (L6470_Direction[((pL6470_AppCmdPkg+PkgId)->p1)].BinaryCode);
+      break;
+    case L6470_MOVE_ID:
+      /* Build the 1st bytes to transmit (DIR) */
+      *(pL6470_DaisyChainSpiTxStruct+((0*L6470DAISYCHAINSIZE)+PkgId)) |= (L6470_Direction[((pL6470_AppCmdPkg+PkgId)->p1)].BinaryCode);
+      
+      /* Build the others bytes to transmit (N_STEP) */
+      for (spibyte=1; spibyte<(3+1); spibyte++)
+      {
+        *(pL6470_DaisyChainSpiTxStruct+((spibyte*L6470DAISYCHAINSIZE)+PkgId)) = (uint8_t)(((pL6470_AppCmdPkg+PkgId)->p2) >> (8*(3-spibyte)));
+      }      
+      break;
+    case L6470_GOTO_ID:
+      /* Build the others bytes to transmit (ABS_POS) */
+      for (spibyte=1; spibyte<(3+1); spibyte++)
+      {
+        *(pL6470_DaisyChainSpiTxStruct+((spibyte*L6470DAISYCHAINSIZE)+PkgId)) = (uint8_t)(((pL6470_AppCmdPkg+PkgId)->p1) >> (8*(3-spibyte)));
+      }
+      break;
+    case L6470_GOTODIR_ID:
+      /* Build the 1st bytes to transmit (DIR) */
+      *(pL6470_DaisyChainSpiTxStruct+((0*L6470DAISYCHAINSIZE)+PkgId)) |= (L6470_Direction[((pL6470_AppCmdPkg+PkgId)->p1)].BinaryCode);
+      
+      /* Build the others bytes to transmit (ABS_POS) */
+      for (spibyte=1; spibyte<(3+1); spibyte++)
+      {
+        *(pL6470_DaisyChainSpiTxStruct+((spibyte*L6470DAISYCHAINSIZE)+PkgId)) = (uint8_t)(((pL6470_AppCmdPkg+PkgId)->p2) >> (8*(3-spibyte)));
+      }
+      break;
+    case L6470_GOUNTIL_ID:
+      /* Build the 1st bytes to transmit (ACT) */
+      *(pL6470_DaisyChainSpiTxStruct+((0*L6470DAISYCHAINSIZE)+PkgId)) |= ((L6470_ACT[((pL6470_AppCmdPkg+PkgId)->p1)].BinaryCode)<<3);
+      /* Build the 1st bytes to transmit (DIR) */
+      *(pL6470_DaisyChainSpiTxStruct+((0*L6470DAISYCHAINSIZE)+PkgId)) |= (L6470_Direction[((pL6470_AppCmdPkg+PkgId)->p2)].BinaryCode);
+      
+      /* Build the others bytes to transmit (SPD) */
+      for (spibyte=1; spibyte<(3+1); spibyte++)
+      {
+        *(pL6470_DaisyChainSpiTxStruct+((spibyte*L6470DAISYCHAINSIZE)+PkgId)) = (uint8_t)(((pL6470_AppCmdPkg+PkgId)->p3) >> (8*(3-spibyte)));
+      }
+      break;
+    case L6470_RELEASESW_ID:
+      /* Build the 1st bytes to transmit (ACT) */
+      *(pL6470_DaisyChainSpiTxStruct+((0*L6470DAISYCHAINSIZE)+PkgId)) |= ((L6470_ACT[((pL6470_AppCmdPkg+PkgId)->p1)].BinaryCode)<<3);
+      /* Build the 1st bytes to transmit (DIR) */
+      *(pL6470_DaisyChainSpiTxStruct+((0*L6470DAISYCHAINSIZE)+PkgId)) |= (L6470_Direction[((pL6470_AppCmdPkg+PkgId)->p2)].BinaryCode);
+      break;
+    case L6470_GOHOME_ID:
+      break;
+    case L6470_GOMARK_ID:
+      break;
+    case L6470_RESETPOS_ID:
+      break;
+    case L6470_RESETDEVICE_ID:
+      break;
+    case L6470_SOFTSTOP_ID:
+      break;
+    case L6470_HARDSTOP_ID:
+      break;
+    case L6470_SOFTHIZ_ID:
+      break;
+    case L6470_HARDHIZ_ID:
+      break;
+    case L6470_GETSTATUS_ID:
+      break;
+    }
+  }
+}
+
+/* End of L6470_Private_Functions */
+
+/**
+  * @addtogroup L6470_Exported_Functions
+  * @{
+  */
+
+/**
+  * @addtogroup L6470_Conversion_Functions
+  * @brief      The following functions act just on one driver inside the L6470
+  *             daisy chain. The command is immediately sent.
+  * @{
+  */
+
+ /**
+  * @brief  Convert the absolute position as 2's complement format into the signed number.
+  * 
+  * @param  AbsPos      The absolute position in the range from [-(2^21)] to [+(2^21)-1].
+  * @retval Position    The position as signed number.
+  */
+int32_t L6470::L6470_AbsPos_2_Position(uint32_t AbsPos)
+{
+  if (AbsPos > L6470_MAX_POSITION)
+    return (AbsPos - (L6470_POSITION_RANGE + 1));
+  else
+    return AbsPos;
+}
+
+/**
+  * @brief  Convert the position as signed number into absolute position as 2's complement format.
+  * 
+  * @param  Position    The position as signed number.
+  * @retval AbsPos      The absolute position in the range from [-(2^21)] to [+(2^21)-1].
+  */
+uint32_t L6470::L6470_Position_2_AbsPos(int32_t Position)
+{
+  if ((Position >= 0) && (Position <= L6470_MAX_POSITION))
+    return Position;
+  else
+  {
+    if ((Position >= L6470_MIN_POSITION) && (Position < 0))
+      return (Position + (L6470_POSITION_RANGE + 1));
+    else
+      return (L6470_POSITION_RANGE + 1);        // OVF
+  }
+}
+
+/**
+  * @brief  Convert the SPEED register value into step/s.
+  * 
+  * @param  Speed       The SPEED register value.
+  * @retval step/s      The speed as step/s.
+  */
+float L6470::L6470_Speed_2_Step_s(uint32_t Speed)
+{
+  return (Speed * ((float)14.9012e-3));
+}
+
+/**
+  * @brief  Convert the speed as step/s into a right value for SPEED register.
+  * 
+  * @param  step/s      The speed as step/s.
+  * @retval Speed       The SPEED register value.
+  */
+uint32_t L6470::L6470_Step_s_2_Speed(float Step_s)
+{
+  if (Step_s <= (L6470_MAX_SPEED * ((float)14.9012e-3)))
+    return (uint32_t)(Step_s / ((float)14.9012e-3));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the ACC register value into step/(s^2).
+  * 
+  * @param  Acc         The ACC register value.
+  * @retval step/(s^2)  The acceleration as step/(s^2).
+  */
+float L6470::L6470_Acc_2_Step_s2(uint16_t Acc)
+{
+  if (Acc <= L6470_MAX_ACC)
+    return (Acc * ((float)1.4552e1));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the acceleartion as step/(s^2) into a right value for ACC register.
+  * 
+  * @param  step/(s^2)  The acceleration as step/(s^2).
+  * @retval Acc         The ACC register value.
+  */
+uint16_t L6470::L6470_Step_s2_2_Acc(float Step_s2)
+{
+  if (Step_s2 <= (L6470_MAX_ACC * ((float)1.4552e1)))
+    return (uint16_t)(Step_s2 / ((float)1.4552e1));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the DEC register value into step/(s^2).
+  * 
+  * @param  Dec         The DEC register value.
+  * @retval step/(s^2)  The deceleration as step/(s^2).
+  */
+float L6470::L6470_Dec_2_Step_s2(uint16_t Dec)
+{
+  if (Dec <= L6470_MAX_DEC)
+    return (Dec * ((float)1.4552e1));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the deceleration as step/(s^2) into a right value for DEC register.
+  * 
+  * @param  step/(s^2)  The deceleration as step/(s^2).
+  * @retval Dec         The DEC register value.
+  */
+uint16_t L6470::L6470_Step_s2_2_Dec(float Step_s2)
+{
+  if (Step_s2 <= (L6470_MAX_DEC * ((float)1.4552e1)))
+    return (uint16_t)(Step_s2 / ((float)1.4552e1));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the MAX_SPEED register value into step/s.
+  * 
+  * @param  MaxSpeed    The MAX_SPEED register value.
+  * @retval step/s      The max speed as step/s.
+  */
+float L6470::L6470_MaxSpeed_2_Step_s(uint16_t MaxSpeed)
+{
+  if (MaxSpeed <= L6470_MAX_MAX_SPEED)
+    return (MaxSpeed * ((float)15.2588));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the max speed as step/s into a right value for MAX_SPEED register.
+  * 
+  * @param  step/s      The max speed as step/s.
+  * @retval MaxSpeed    The MAX_SPEED register value.
+  */
+uint16_t L6470::L6470_Step_s_2_MaxSpeed(float Step_s)
+{
+  if (Step_s <= (L6470_MAX_MAX_SPEED * ((float)15.2588)))
+    return (uint16_t)(Step_s / ((float)15.2588));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the MIN_SPEED register value into step/s.
+  * 
+  * @param  MinSpeed    The MIN_SPEED register value.
+  * @retval step/s      The min speed as step/s.
+  */
+float L6470::L6470_MinSpeed_2_Step_s(uint16_t MinSpeed)
+{
+  if (MinSpeed <= L6470_MAX_MIN_SPEED)
+    return (MinSpeed * ((float)238.4186e-3));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the min speed as step/s into a right value for MIN_SPEED register.
+  * 
+  * @param  step/s      The min speed as step/s.
+  * @retval MinSpeed    The MIN_SPEED register value.
+  */
+uint16_t L6470::L6470_Step_s_2_MinSpeed(float Step_s)
+{
+  if (Step_s <= (L6470_MAX_MIN_SPEED * ((float)238.4186e-3)))
+    return (uint16_t)(Step_s / ((float)238.4186e-3));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the FS_SPD register value into step/s.
+  * 
+  * @param  FsSpd       The FS_SPD register value.
+  * @retval step/s      The full-step speed as step/s.
+  */
+float L6470::L6470_FsSpd_2_Step_s(uint16_t FsSpd)
+{
+  if (FsSpd <= L6470_MAX_FS_SPD)
+    return ((FsSpd+0.5) * ((float)15.25));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the full-step speed as step/s into a right value for FS_SPD register.
+  * 
+  * @param  step/s      The full-step speed as step/s.
+  * @retval FsSpd       The FS_SPD register value.
+  */
+uint16_t L6470::L6470_Step_s_2_FsSpd(float Step_s)
+{
+  if (Step_s <= ((L6470_MAX_FS_SPD+0.5) * ((float)15.25)))
+    return (uint16_t)((float)(Step_s / ((float)15.25)) - (float)0.5);
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the INT_SPEED register value into step/s.
+  * 
+  * @param  IntSpeed    The INT_SPEED register value.
+  * @retval step/s      The intersect speed as step/s.
+  */
+float L6470::L6470_IntSpeed_2_Step_s(uint16_t IntSpeed)
+{
+  if (IntSpeed <= L6470_MAX_INT_SPEED)
+    return (IntSpeed * ((float)59.6046e-3));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the intersect speed as step/s into a right value for INT_SPEED register.
+  * 
+  * @param  step/s      The full-step speed as step/s.
+  * @retval FsSpd       The FS_SPD register value.
+  */
+uint16_t L6470::L6470_Step_s_2_IntSpeed(float Step_s)
+{
+  if (Step_s <= (L6470_MAX_INT_SPEED * ((float)59.6046e-3)))
+    return (uint16_t)(Step_s / ((float)59.6046e-3));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the ST_SLP register value into s/step.
+  * 
+  * @param  StartSlope  The ST_SLP register value.
+  * @retval s/step      The start slope as s/step.
+  */
+float L6470::L6470_StSlp_2_s_Step(uint8_t StSlp)
+{
+//  if (StSlp <= L6470_MAX_ST_SLP)
+    return (StSlp * ((float)1.5686e-5));
+//  else
+//    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the intersect speed as step/s into a right value for INT_SPEED register.
+  * 
+  * @param  step/s      The full-step speed as step/s.
+  * @retval FsSpd       The FS_SPD register value.
+  */
+uint8_t L6470::L6470_s_Step_2_StSlp(float s_Step)
+{
+  if (s_Step <= (L6470_MAX_ST_SLP * ((float)1.5686e-5)))
+    return (uint8_t)(s_Step / ((float)1.5686e-5));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the INT_SPEED register value into step/s.
+  * 
+  * @param  IntSpeed    The INT_SPEED register value.
+  * @retval step/s      The intersect speed as step/s.
+  */
+float L6470::L6470_FnSlpAcc_2_s_Step(uint8_t FnSlpAcc)
+{
+//  if (FnSlpAcc <= L6470_MAX_FN_SLP_ACC)
+    return (FnSlpAcc * ((float)1.5686e-5));
+//  else
+//    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the intersect speed as step/s into a right value for INT_SPEED register.
+  * 
+  * @param  step/s      The full-step speed as step/s.
+  * @retval FsSpd       The FS_SPD register value.
+  */
+uint8_t L6470::L6470_s_Step_2_FnSlpAcc(float s_Step)
+{
+  if (s_Step <= (L6470_MAX_FN_SLP_ACC * ((float)1.5686e-5)))
+    return (uint8_t)(s_Step / ((float)1.5686e-5));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the INT_SPEED register value into step/s.
+  * 
+  * @param  IntSpeed    The INT_SPEED register value.
+  * @retval step/s      The intersect speed as step/s.
+  */
+float L6470::L6470_FnSlpDec_2_s_Step(uint8_t FnSlpDec)
+{
+//  if (FnSlpDec <= L6470_MAX_FN_SLP_DEC)
+    return (FnSlpDec * ((float)1.5686e-5));
+//  else
+//    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the intersect speed as step/s into a right value for INT_SPEED register.
+  * 
+  * @param  step/s      The full-step speed as step/s.
+  * @retval FsSpd       The FS_SPD register value.
+  */
+uint8_t L6470::L6470_s_Step_2_FnSlpDec(float s_Step)
+{
+  if (s_Step <= (L6470_MAX_FN_SLP_DEC * ((float)1.5686e-5)))
+    return (uint8_t)(s_Step / ((float)1.5686e-5));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the OCD_TH register value into mA.
+  * 
+  * @param  OcdTh       The OCD_TH register value.
+  * @retval mA          The overcurrent threshold as mA.
+  */
+float L6470::L6470_OcdTh_2_mA(uint8_t OcdTh)
+{
+  if (OcdTh <= L6470_MAX_OCD_TH)
+    return ((OcdTh+1) * ((float)375));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the overcurrent threshold as mA into a right value for OCD_TH register.
+  * 
+  * @param  mA          The overcurrent threshold as mA.
+  * @retval OcdTh       The OCD_TH register value.
+  */
+uint8_t L6470::L6470_mA_2_OcdTh(float mA)
+{
+  float result, decimal;
+  
+  if (mA <= ((L6470_MAX_OCD_TH+1) * ((float)375)))
+  {
+    result = (mA / ((float)375));
+    decimal = result - (uint8_t)result;
+    
+    if (decimal < (float)0.5)
+      return ((uint8_t)result - 1);
+    else
+      return ((uint8_t)result);    
+  }
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the STALL_TH register value into mA.
+  * 
+  * @param  StallTh     The STALL_TH register value.
+  * @retval mA          The stall detection threshold as mA.
+  */
+float L6470::L6470_StallTh_2_mA(uint8_t StallTh)
+{
+  if (StallTh <= L6470_MAX_STALL_TH)
+    return ((StallTh+1) * ((float)31.25));
+  else
+    return 0;   // Warning
+}
+
+/**
+  * @brief  Convert the stall detection threshold as mA into a right value for STALL_TH register.
+  * 
+  * @param  mA          The stall detection threshold as mA.
+  * @retval StallTh     The STALL_TH register value.
+  */
+uint8_t L6470::L6470_mA_2_StallTh(float mA)
+{
+  float result, decimal;
+  
+  if (mA <= ((L6470_MAX_STALL_TH+1) * ((float)31.25)))
+  {
+    result = (mA / ((float)31.25));
+    decimal = result - (uint8_t)result;
+    
+    if (decimal < (float)0.5)
+      return ((uint8_t)result - 1);
+    else
+      return ((uint8_t)result);    
+  }
+  else
+    return 0;   // Warning
+}
+
+/* End of L6470_Conversion_Functions */
+
+/**
+  * @addtogroup L6470_AppCMDs
+  * @{
+  */
+
+/**
+  * @brief  SetParam command sets the register value equal to a new value.
+  * 
+  * @param  L6470_RegId   The identifier of the L6470 register to be addressed.
+  * @param  Value         The new value.
+  */
+void L6470::L6470_SetParam(eL6470_RegId_t L6470_RegId, uint32_t Value)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_SETPARAM_ID, L6470_RegId, Value, 0);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+}
+
+/**
+  * @brief  GetParam command reads the register value.
+  * 
+  * @param  L6470_RegId   The identifier of the L6470 register to be addressed.
+  * 
+  * @retval ReceivedValue The register value.
+  */
+uint32_t L6470::L6470_GetParam(eL6470_RegId_t L6470_RegId)
+{
+  uint8_t ValueLengthByte;
+  uint32_t ReceivedValue;
+
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_GETPARAM_ID, L6470_RegId, 0, 0);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+  
+  ValueLengthByte = L6470_Register[L6470_RegId].LengthByte;
+  
+  ReceivedValue = L6470_ExtractReturnedData((uint8_t*)L6470_DaisyChainSpiRxStruct, ValueLengthByte);
+  
+  return ReceivedValue;
+}
+
+/**
+  * @brief  Run command produces a motion at fixed speed.
+  * 
+  * @param  L6470_DirId   The identifier of the L6470 motion direction.
+  * @param  Speed         The speed value as (([step/s] * 250e-9) / 2^-28)
+  */
+void L6470::L6470_Run(eL6470_DirId_t L6470_DirId, uint32_t Speed)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_RUN_ID, L6470_DirId, Speed, 0);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+}
+
+/**
+  * @brief  StepClock command switches the device in Step-clock mode.
+  * 
+  * @param  L6470_DirId   The identifier of the L6470 motion direction.
+  */
+void L6470::L6470_StepClock(eL6470_DirId_t L6470_DirId)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_STEPCLOCK_ID, L6470_DirId, 0, 0);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+}
+
+/**
+  * @brief  Move command produces a motion of N_STEP microsteps.
+  * 
+  * @param  L6470_DirId   The identifier of the L6470 motion direction.
+  * @param  N_Step        The number of microsteps.
+  */
+void L6470::L6470_Move(eL6470_DirId_t L6470_DirId, uint32_t N_Step)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_MOVE_ID, L6470_DirId, N_Step, 0);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+}
+
+/**
+  * @brief  GoTo command produces a motion to ABS_POS absolute position through the shortest path.
+  * 
+  * @param  AbsPos        The target absolute position.
+  */
+void L6470::L6470_GoTo(uint32_t AbsPos)
+{
+  if (AbsPos <= L6470_POSITION_RANGE)
+  {
+    L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_GOTO_ID, AbsPos, 0, 0);
+    L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+    L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+  }
+}
+
+/**
+  * @brief  GoTo_DIR command produces a motion to ABS_POS absolute position imposing a direction.
+  * 
+  * @param  L6470_DirId   The identifier of the L6470 motion direction.
+  * @param  AbsPos        The target absolute position.
+  */
+void L6470::L6470_GoToDir(eL6470_DirId_t L6470_DirId, uint32_t AbsPos)
+{
+  if (AbsPos <= L6470_POSITION_RANGE)
+  {
+    L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_GOTODIR_ID, L6470_DirId, AbsPos, 0);
+    L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+    L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+  }
+}
+
+/**
+  * @brief  GoUntil command produces a motion at fixed speed imposing a direction
+  *         until an external switch turn-on event occurs.
+  * 
+  * @param  L6470_ActId   The identifier of the L6470 action about the absolute position.
+  * @param  L6470_DirId   The identifier of the L6470 motion direction.
+  * @param  Speed         The speed value as (([step/s] * 250e-9) / 2^-28)
+  */
+void L6470::L6470_GoUntil(eL6470_ActId_t L6470_ActId, eL6470_DirId_t L6470_DirId, uint32_t Speed)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_GOUNTIL_ID, L6470_ActId, L6470_DirId, Speed);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+}
+
+/**
+  * @brief  ReleaseSW command produces a motion at minimum speed imposing a direction
+  *         until SW is released.
+  * 
+  * @param  L6470_ActId   The identifier of the L6470 action about the absolute position.
+  * @param  L6470_DirId   The identifier of the L6470 motion direction.
+  */
+void L6470::L6470_ReleaseSW(eL6470_ActId_t L6470_ActId, eL6470_DirId_t L6470_DirId)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_RELEASESW_ID, L6470_ActId, L6470_DirId, 0);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+}
+
+/**
+  * @brief  GoHome command produces a motion to the HOME position (zero position)
+  *         via the shortest path.
+  * 
+  */
+void L6470::L6470_GoHome(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_GOHOME_ID, 0, 0, 0);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+}
+
+/**
+  * @brief  GoMark command produces a motion to the MARK position performing the
+  *         minimum path.
+  * 
+  */
+void L6470::L6470_GoMark(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_GOMARK_ID, 0, 0, 0);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+}
+
+/**
+  * @brief  ResetPos command resets the ABS_POS register to zero.
+  * 
+  */
+void L6470::L6470_ResetPos(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_RESETPOS_ID, 0, 0, 0);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+}
+
+/**
+  * @brief  ResetDevice command resets the device to power-up conditions.
+  * 
+  */
+void L6470::L6470_ResetDevice(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_RESETDEVICE_ID, 0, 0, 0);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+}
+
+/**
+  * @brief  SoftStop command causes an immediate deceleration to zero speed and
+  *         a consequent motor stop; the deceleration value used is the one stored
+  *         in the DEC register.
+  * 
+  */
+void L6470::L6470_SoftStop(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_SOFTSTOP_ID, 0, 0, 0);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+}
+
+/**
+  * @brief  HardStop command causes an immediate motor stop with infinite deceleration.
+  * 
+  */
+void L6470::L6470_HardStop(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_HARDSTOP_ID, 0, 0, 0);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+}
+
+/**
+  * @brief  SoftHiZ command disables the power bridges (high impedance state)
+  *         after a deceleration to zero; the deceleration value used is the one
+  *         stored in the DEC register.
+  * 
+  */
+void L6470::L6470_SoftHiZ(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_SOFTHIZ_ID, 0, 0, 0);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+}
+
+/**
+  * @brief  HardHiZ command immediately disables the power bridges (high impedance state).
+  * 
+  */
+void L6470::L6470_HardHiZ(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_HARDHIZ_ID, 0, 0, 0);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+}
+
+/**
+  * @brief  GetStatus command returns the STATUS register value.
+  * 
+  * 
+  * @retval ReceivedValue The register value.
+  */
+uint16_t L6470::L6470_GetStatus(void)
+{
+  uint16_t ReceivedValue;
+
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_GETSTATUS_ID, 0, 0, 0);
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+  
+  ReceivedValue = (uint16_t)L6470_ExtractReturnedData((uint8_t*)L6470_DaisyChainSpiRxStruct, 2);
+  
+  return ReceivedValue;
+}
+
+/* End of L6470_AppCMDs */
+
+/**
+  * @addtogroup L6470_AppCMDs_ToBePrepared
+  * @{
+  */
+
+/**
+  * @brief  Prepare to send @ref L6470_SetParam command.
+  *
+  * @param  L6470_RegId   The identifier of the L6470 register to be addressed.
+  * @param  Value         The new value.
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareSetParam(eL6470_RegId_t L6470_RegId, uint32_t Value)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_SETPARAM_ID, L6470_RegId, Value, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_GetParam command.
+  *
+  * @param  L6470_Id      The L6470 identifier inside the daisy chain.
+  * @param  L6470_RegId   The identifier of the L6470 register to be addressed.
+  *
+  * @retval ReceivedValue The register value.
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareGetParam(eL6470_RegId_t L6470_RegId)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_GETPARAM_ID, L6470_RegId, 0, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_Run command.
+  * 
+  * @param  L6470_DirId   The identifier of the L6470 motion direction.
+  * @param  Speed         The speed value as (([step/s] * 250e-9) / 2^-28)
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareRun(eL6470_DirId_t L6470_DirId, uint32_t Speed)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_RUN_ID, L6470_DirId, Speed, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_StepClock command.
+  * 
+  * @param  L6470_DirId   The identifier of the L6470 motion direction.
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareStepClock(eL6470_DirId_t L6470_DirId)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_STEPCLOCK_ID, L6470_DirId, 0, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_Move command.
+  * 
+  * @param  L6470_DirId   The identifier of the L6470 motion direction.
+  * @param  N_Step        The number of microsteps.
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareMove(eL6470_DirId_t L6470_DirId, uint32_t N_Step)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_MOVE_ID, L6470_DirId, N_Step, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_GoTo command.
+  * 
+  * @param  AbsPos        The target absolute position.
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareGoTo(uint32_t AbsPos)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_GOTO_ID, AbsPos, 0, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_GoToDIR command.
+  * 
+  * @param  L6470_DirId   The identifier of the L6470 motion direction.
+  * @param  AbsPos        The target absolute position.
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareGoToDir(eL6470_DirId_t L6470_DirId, uint32_t AbsPos)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_GOTODIR_ID, L6470_DirId, AbsPos, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_GoUntil command.
+  * 
+  * @param  L6470_ActId   The identifier of the L6470 action about the absolute position.
+  * @param  L6470_DirId   The identifier of the L6470 motion direction.
+  * @param  Speed         The speed value as (([step/s] * 250e-9) / 2^-28)
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareGoUntil(eL6470_ActId_t L6470_ActId, eL6470_DirId_t L6470_DirId, uint32_t Speed)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_GOUNTIL_ID, L6470_ActId, L6470_DirId, Speed);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_ReleaseSW.
+  * 
+  * @param  L6470_ActId   The identifier of the L6470 action about the absolute position.
+  * @param  L6470_DirId   The identifier of the L6470 motion direction.
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareReleaseSW(eL6470_ActId_t L6470_ActId, eL6470_DirId_t L6470_DirId)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_RELEASESW_ID, L6470_ActId, L6470_DirId, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_GoHome command.
+  * 
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareGoHome(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_GOHOME_ID, 0, 0, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_GoMark command.
+  * 
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareGoMark(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_GOMARK_ID, 0, 0, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_ResetPos command.
+  * 
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareResetPos(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_RESETPOS_ID, 0, 0, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_ResetDevice command.
+  * 
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareResetDevice(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_RESETDEVICE_ID, 0, 0, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_SoftStop command.
+  * 
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareSoftStop(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_SOFTSTOP_ID, 0, 0, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_HardStop command.
+  * 
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareHardStop(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_HARDSTOP_ID, 0, 0, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_SoftHiZ command.
+  * 
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareSoftHiZ(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_SOFTHIZ_ID, 0, 0, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_HardHiZ command.
+  * 
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareHardHiZ(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_HARDHIZ_ID, 0, 0, 0);
+}
+
+/**
+  * @brief  Prepare to send @ref L6470_GetStatus command.
+  * 
+  *
+  * @note   This function will properly fill the right column of the L6470_AppCmdPkg.
+  * @note   The commad will be sent by @ref L6470_PerformPreparedApplicationCommand.
+  */
+void L6470::L6470_PrepareGetStatus(void)
+{
+  L6470_PrepareAppCmdPkg(L6470_AppCmdPkg, L6470_GETSTATUS_ID, 0, 0, 0);
+}
+
+/* End of L6470_AppCMDs_ToBePrepared */
+
+/**
+  * @brief  Send via SPI the command stored inside the L6470_AppCmdPkg to the
+  *         L6470 daisy chain.
+  * 
+  * @retval (uint8_t*)data->L6470_DaisyChainSpiRxStruct  The pointer to the structure
+  *         containing returned values from each L6470 of the daisy chain for each
+  *         sent SPI data.
+  */
+uint8_t* L6470::L6470_PerformPreparedApplicationCommand(void)
+{
+  L6470_PrepareDaisyChainCommand(L6470_AppCmdPkg, (uint8_t*)L6470_DaisyChainSpiTxStruct);
+  L6470_DaisyChainCommand((uint8_t*)L6470_DaisyChainSpiTxStruct, (uint8_t*)L6470_DaisyChainSpiRxStruct);
+  
+  return (uint8_t*)(L6470_DaisyChainSpiRxStruct);
+}
+
+/**
+  * @brief  Send command to the L6470 daisy chain via SPI
+  * @param  pL6470_DaisyChainSpiTxStruct  Pointer to the matrix array of bytes to be sent to the daisy chain L6470
+  * @param  pL6470_DaisyChainSpiRxStruct  Pointer to the matrix array of bytes to be received from the daisy chain L6470
+  */
+void L6470::L6470_DaisyChainCommand(uint8_t* pL6470_DaisyChainSpiTxStruct, uint8_t* pL6470_DaisyChainSpiRxStruct)
+{
+  uint8_t spibyte;
+  
+  L6470_DaisyChain_HalfPrepared = ZERO_F;
+  
+  /* Send all command bytes via SPI */
+  for(spibyte=0; spibyte < L6470MAXSPICMDBYTESIZE; spibyte++)
+  {
+    /* Send the command via SPI */
+    L6470_SPI_Communication((pL6470_DaisyChainSpiTxStruct+(spibyte * L6470DAISYCHAINSIZE)), (pL6470_DaisyChainSpiRxStruct+(spibyte * L6470DAISYCHAINSIZE)), L6470DAISYCHAINSIZE, 10);
+    
+    //_DELAY(TDISCS);
+    uint8_t delay_cnt;
+    for (delay_cnt=0; delay_cnt<20; delay_cnt++) __NOP();   //!<Simply deselect time delay for SPI nCS
+  }
+}
+
+/**
+  * @brief    Extracts the data returned by the L6470 from the matrix that
+  *           contains the received SPI data.
+  * @param    L6470_Id  The identifier of the L6470 target inside the daisy chain.
+  * @param    pL6470_DaisyChainSpiRxStruct  uint8_t-pointer to the matrix that
+  *           contains the received data by SPI from the L6470 daisy chain.
+  * @param    LengthByte  The number of bytes about the received value.
+  */
+uint32_t L6470::L6470_ExtractReturnedData(uint8_t* pL6470_DaisyChainSpiRxStruct, uint8_t LengthByte)
+{
+  uint32_t value;
+  uint8_t i;
+
+  value = 0x000000;
+  for (i=1; i<=(L6470MAXSPICMDBYTESIZE-1); i++)
+  {
+    value |= (*(pL6470_DaisyChainSpiRxStruct+(i*L6470DAISYCHAINSIZE)+L6470_Id))<<((LengthByte-i)*8);
+  }
+
+  return value;
+}
+
+/**
+  * @brief  Check the state of a flag inside the L6470 STATUS register.
+  *
+  * @param  L6470_Id  The identifier of the L6470 target inside the daisy chain.
+  * @param  L6470_StatusRegisterFlagId  The identifier of the L6470 STATUS flag to be checked.
+  *
+  * @retval state The flag state.
+  */
+
+uint8_t L6470::L6470_CheckStatusRegisterFlag(uint8_t L6470_StatusRegisterFlagId)
+{
+  uint8_t state = 0;
+
+  *((uint16_t*)pL6470_StatusRegister) = L6470_GetParam(L6470_STATUS_ID);
+  
+  switch(L6470_StatusRegisterFlagId)
+  {
+    case HiZ_ID:
+      state = pL6470_StatusRegister->HiZ;
+      break;
+    case BUSY_ID:
+      state = pL6470_StatusRegister->BUSY;
+      break;
+    case SW_F_ID:
+      state = pL6470_StatusRegister->SW_F;
+      break;
+    case SW_EVN_ID:
+      state = pL6470_StatusRegister->SW_EVN;
+      break;
+    case DIR_ID:
+      state = pL6470_StatusRegister->DIR;
+      break;
+    case MOT_STATUS_ID:
+      state = pL6470_StatusRegister->MOT_STATUS;
+      break;
+    case NOTPERF_CMD_ID:
+      state = pL6470_StatusRegister->NOTPERF_CMD;
+      break;
+    case WRONG_CMD_ID:
+      state = pL6470_StatusRegister->WRONG_CMD;
+      break;
+    case UVLO_ID:
+      state = pL6470_StatusRegister->UVLO;
+      break;
+    case TH_WRN_ID:
+      state = pL6470_StatusRegister->TH_WRN;
+      break;
+    case TH_SD_ID:
+      state = pL6470_StatusRegister->TH_SD;
+      break;
+    case OCD_ID:
+      state = pL6470_StatusRegister->OCD;
+      break;
+    case STEP_LOSS_A_ID:
+      state = pL6470_StatusRegister->STEP_LOSS_A;
+      break;
+    case STEP_LOSS_B_ID:
+      state = pL6470_StatusRegister->STEP_LOSS_B;
+      break;
+    case SCK_MOD_ID:
+      state = pL6470_StatusRegister->SCK_MOD;
+      break;
+  }
+  
+  return state;
+}
+
+/**
+  * @brief  Return the mnemonic name for the L6470 register.
+  * @param  id  The identifier of the L6470 register.
+  */
+uint8_t *L6470::L6470_GetRegisterName(uint8_t id)
+{
+  if (id < L6470REGIDSIZE)
+  {
+    return (uint8_t*)L6470_Register[id].Name;
+  }
+  else
+  {
+    return NULL;
+  }
+}
+
+/**
+  * @brief  Configures the L6470 registers.
+  * @param  init The pointer to the initialization structure.
+  */
+status_t L6470::L6470_Config(void *init)
+{
+  /* Disable the L6470. */
+  L6470_DISABLE();
+
+  /* Enable the L6470. */
+  L6470_ENABLE();
+
+  /* Reset devices. */
+  ResetDevice();
+
+  /* Reset Status Register flags. */
+  GetStatus();
+
+  /* Prepare the 'Register' field of StepperMotorDriverHandle */
+  L6470_init_t *MotorParameterData = (L6470_init_t *) init;
+  StepperMotorRegister.ACC = L6470_Step_s2_2_Acc(MotorParameterData->acc);
+  StepperMotorRegister.DEC = L6470_Step_s2_2_Dec(MotorParameterData->dec);
+  StepperMotorRegister.MAX_SPEED = L6470_Step_s_2_MaxSpeed(MotorParameterData->maxspeed);
+  StepperMotorRegister.MIN_SPEED = L6470_Step_s_2_MinSpeed(MotorParameterData->minspeed);
+  StepperMotorRegister.FS_SPD = L6470_Step_s_2_FsSpd(MotorParameterData->fsspd);
+  StepperMotorRegister.KVAL_HOLD = (uint8_t)((float)((float)(MotorParameterData->kvalhold * 256) / (MotorParameterData->motorvoltage)));
+  StepperMotorRegister.KVAL_RUN = (uint8_t)((float)((float)(MotorParameterData->kvalrun * 256) / (MotorParameterData->motorvoltage)));
+  StepperMotorRegister.KVAL_ACC = (uint8_t)((float)((float)(MotorParameterData->kvalacc * 256) / (MotorParameterData->motorvoltage)));
+  StepperMotorRegister.KVAL_DEC = (uint8_t)((float)((float)(MotorParameterData->kvaldec * 256) / (MotorParameterData->motorvoltage)));
+  StepperMotorRegister.INT_SPEED = L6470_Step_s_2_IntSpeed(MotorParameterData->intspeed);
+  StepperMotorRegister.ST_SLP = L6470_s_Step_2_StSlp(MotorParameterData->stslp);
+  StepperMotorRegister.FN_SLP_ACC = L6470_s_Step_2_FnSlpAcc(MotorParameterData->fnslpacc);
+  StepperMotorRegister.FN_SLP_DEC = L6470_s_Step_2_FnSlpDec(MotorParameterData->fnslpdec);
+  StepperMotorRegister.K_THERM = MotorParameterData->kterm;
+  StepperMotorRegister.OCD_TH = L6470_mA_2_OcdTh(MotorParameterData->ocdth);
+  StepperMotorRegister.STALL_TH = L6470_mA_2_StallTh(MotorParameterData->stallth);
+  StepperMotorRegister.ALARM_EN = MotorParameterData->alarmen;
+  StepperMotorRegister.CONFIG = MotorParameterData->config;
+  StepperMotorRegister.STEP_MODE = MotorParameterData->step_sel;
+
+  /* Write the L6470 registers with the prepared data */
+  L6470_SetParam(L6470_ACC_ID, StepperMotorRegister.ACC);
+  L6470_SetParam(L6470_DEC_ID, StepperMotorRegister.DEC);
+  L6470_SetParam(L6470_MAX_SPEED_ID, StepperMotorRegister.MAX_SPEED);
+  L6470_SetParam(L6470_MIN_SPEED_ID, StepperMotorRegister.MIN_SPEED);
+  L6470_SetParam(L6470_FS_SPD_ID, StepperMotorRegister.FS_SPD);
+  L6470_SetParam(L6470_KVAL_HOLD_ID, StepperMotorRegister.KVAL_HOLD);
+  L6470_SetParam(L6470_KVAL_RUN_ID, StepperMotorRegister.KVAL_RUN);
+  L6470_SetParam(L6470_KVAL_ACC_ID, StepperMotorRegister.KVAL_ACC);
+  L6470_SetParam(L6470_KVAL_DEC_ID, StepperMotorRegister.KVAL_DEC);
+  L6470_SetParam(L6470_INT_SPEED_ID, StepperMotorRegister.INT_SPEED);
+  L6470_SetParam(L6470_ST_SLP_ID, StepperMotorRegister.ST_SLP);
+  L6470_SetParam(L6470_FN_SLP_ACC_ID, StepperMotorRegister.FN_SLP_ACC);
+  L6470_SetParam(L6470_FN_SLP_DEC_ID, StepperMotorRegister.FN_SLP_DEC);
+  L6470_SetParam(L6470_K_THERM_ID, StepperMotorRegister.K_THERM);
+  L6470_SetParam(L6470_OCD_TH_ID, StepperMotorRegister.OCD_TH);
+  L6470_SetParam(L6470_STALL_TH_ID, StepperMotorRegister.STALL_TH);
+  L6470_SetParam(L6470_ALARM_EN_ID, StepperMotorRegister.ALARM_EN);
+  L6470_SetParam(L6470_CONFIG_ID, StepperMotorRegister.CONFIG);
+  if (!SetStepMode((StepperMotor::step_mode_t) StepperMotorRegister.STEP_MODE))
+    return COMPONENT_ERROR;
+  
+  return COMPONENT_OK;
+}
+
+/* End of L6470_Exported_Functions */
+
+/* End of L6470 */
+
+/* End of Components */
+
+/* End of BSP */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/