Xbee API library with support SPI connection. (use only SPI supported model. see also http://www.digi.com/support/kbase/kbaseresultdetl?id=3362 )
Dependents: XBeeWiFi_SPI_example
Fork of XBee by
Tx16Request Class Reference
Represents a Series 1 TX packet that corresponds to Api Id: TX_16_REQUEST Be careful not to send a data array larger than the max packet size of your radio. More...
#include <XBee.h>
Inherits PayloadRequest.
Public Member Functions | |
Tx16Request (uint16_t addr16, uint8_t *payload, uint16_t payloadLength) | |
Creates a Unicast Tx16Request with the ACK option and DEFAULT_FRAME_ID. | |
Tx16Request () | |
Creates a default instance of this class. | |
virtual uint8_t | getFrameData (uint16_t pos) |
Starting after the frame id (pos = 0) and up to but not including the checksum Note: Unlike Digi's definition of the frame data, this does not start with the API ID. | |
virtual uint16_t | getFrameDataLength () |
Returns the size of the api frame (not including frame id or api id or checksum). | |
uint8_t * | getPayload () |
Returns the payload of the packet, if not null. | |
void | setPayload (uint8_t *payloadPtr) |
Sets the payload array. | |
uint16_t | getPayloadLength () |
Returns the length of the payload array, as specified by the user. | |
void | setPayloadLength (uint16_t payloadLength) |
Sets the length of the payload to include in the request. | |
void | setFrameId (uint8_t frameId) |
Sets the frame id. | |
uint8_t | getFrameId () |
Returns the frame id. | |
uint8_t | getApiId () |
Returns the API id. |
Detailed Description
Represents a Series 1 TX packet that corresponds to Api Id: TX_16_REQUEST
Be careful not to send a data array larger than the max packet size of your radio.
This class does not perform any validation of packet size and there will be no indication if the packet is too large, other than you will not get a TX Status response. The datasheet says 100 bytes is the maximum, although that could change in future firmware.
Definition at line 806 of file XBee.h.
Constructor & Destructor Documentation
Tx16Request | ( | uint16_t | addr16, |
uint8_t * | payload, | ||
uint16_t | payloadLength | ||
) |
Creates a Unicast Tx16Request with the ACK option and DEFAULT_FRAME_ID.
Tx16Request | ( | ) |
Creates a default instance of this class.
At a minimum you must specify a payload, payload length and a destination address before sending this request.
Member Function Documentation
uint8_t getApiId | ( | ) | [inherited] |
Returns the API id.
virtual uint8_t getFrameData | ( | uint16_t | pos ) | [virtual] |
Starting after the frame id (pos = 0) and up to but not including the checksum Note: Unlike Digi's definition of the frame data, this does not start with the API ID.
The reason for this is the API ID and Frame ID are common to all requests, whereas my definition of frame data is only the API specific data.
Implements XBeeRequest.
virtual uint16_t getFrameDataLength | ( | ) | [virtual] |
Returns the size of the api frame (not including frame id or api id or checksum).
Implements XBeeRequest.
uint8_t getFrameId | ( | ) | [inherited] |
Returns the frame id.
uint8_t* getPayload | ( | ) | [inherited] |
Returns the payload of the packet, if not null.
uint16_t getPayloadLength | ( | ) | [inherited] |
Returns the length of the payload array, as specified by the user.
void setFrameId | ( | uint8_t | frameId ) | [inherited] |
Sets the frame id.
Must be between 1 and 255 inclusive to get a TX status response.
void setPayload | ( | uint8_t * | payloadPtr ) | [inherited] |
Sets the payload array.
void setPayloadLength | ( | uint16_t | payloadLength ) | [inherited] |
Sets the length of the payload to include in the request.
For example if the payload array is 50 bytes and you only want the first 10 to be included in the packet, set the length to 10. Length must be <= to the array length.
Generated on Tue Jul 12 2022 23:53:35 by 1.7.2