agung gema abriansyah
Pengujian Battery
Dependencies: SDFileSystem TextLCD mbed
Fork of
Seeed_SDCard_Shield
by 
Shields
Diff: main.cpp
- Revision:
- 5:47c9375675bb
- Parent:
- 3:5edc67dee8b7
- Child:
- 6:1b08722d3aba
--- a/main.cpp Fri Feb 13 09:40:18 2015 +0000
+++ b/main.cpp Thu Feb 02 08:01:29 2017 +0000
@@ -1,45 +1,407 @@
-/* Copyright (c) 2010-2011 mbed.org, MIT License
-*
-* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
-* and associated documentation files (the "Software"), to deal in the Software without
-* restriction, including without limitation the rights to use, copy, modify, merge, publish,
-* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
-* Software is furnished to do so, subject to the following conditions:
-*
-* The above copyright notice and this permission notice shall be included in all copies or
-* substantial portions of the Software.
-*
-* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
-* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
-* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-*/
-
-#include "mbed.h"
-#include "SDFileSystem.h"
-
-Serial pc(USBTX, USBRX);
-SDFileSystem sd(D11, D12, D13, D10, "sd"); // MOSI, MISO, SCK, CS
-FILE *fp;
-
-int main() {
- wait(2);
- pc.printf("Initializing\r\n");
-
- fp = fopen("/sd/hello.txt", "r");
- if (fp != NULL) {
- fclose(fp);
- remove("/sd/hello.txt");
- pc.printf("Remove an existing file with the same name\r\n");
- }
-
- fp = fopen("/sd/hello.txt", "w");
- if (fp == NULL) {
- pc.printf("Unable to write the file\r\n");
- } else {
- fprintf(fp, "mbed SDCard application!");
- fclose(fp);
- pc.printf("File successfully written!\r\n");
- }
-}
+#include "mbed.h"
+#include "TextLCD.h"
+#define max 5
+#include "SDFileSystem.h"
+
+
+
+
+AnalogIn V1_VALUE(A0);
+AnalogIn V2_VALUE(A1);
+AnalogIn V3_VALUE(A2);
+AnalogIn V4_VALUE(A3);
+DigitalOut led(A4);
+DigitalIn mybutton(USER_BUTTON);
+DigitalIn mybutton1(D2);
+DigitalIn mybutton2(D3);
+DigitalIn mybutton3(A5);
+
+Serial pc(USBTX, USBRX);
+Timer t;
+Timer t1;
+Timer t2;
+Timer t3;
+Timer t4;
+
+TextLCD lcd(D8, D9, D4, D5, D6, D7, TextLCD::LCD20x4);
+SDFileSystem sd(D11, D12, D13, D10, "sd"); // MOSI, MISO, SCK, CS
+FILE *fp;
+
+
+ float V1,V2,V3,V4,VTOTAL,m,m1,m2,m3,m4,stat,stat1,stat2,stat3,abc1,abc2,abc3,abc4;
+ float x1=19.2225579;
+ float x2=19.2643794;
+ float x3=19.1854839;
+ float x4=19.1653226;
+ int n=1000;
+ int p,z,x,c,d,d1,d2,d3,d4,jam,number;
+
+int main()
+{
+
+ restart:
+
+ int count=0;
+ float jum1,jum2,jum3,jum4;
+
+ lcd.cls ();
+ lcd.locate (0, 0);
+ lcd.printf ("********************");
+ lcd.locate (0, 1);
+ lcd.printf ("* Alat Ukur *");
+ lcd.locate (0, 2);
+ lcd.printf ("*Pengujian Battery *");
+ lcd.locate (0, 3);
+ lcd.printf ("********************");
+
+ while(1)
+ {
+ if (mybutton == 0){
+ p = 1;
+ break;
+ }
+ }
+
+ loop:
+ //SDCARD =====================================
+ lcd.cls();
+ //pc.printf("Initializing\r\n");
+ lcd.printf("Initializing");
+ wait(0.1);
+ lcd.cls();
+ lcd.printf("Initializing.");
+ wait(0.1);
+ lcd.cls();
+ lcd.printf("Initializing..");
+ wait(0.1);
+ lcd.cls();
+ lcd.printf("Initializing...");
+ wait(0.1);
+
+
+ char buf [10];
+ number %= 1000000;
+ sprintf(buf,"/sd/data%d.csv",number);
+ fp = fopen(buf, "r");
+ if (fp != NULL) {
+ fclose(fp);
+ number++;
+ //pc.printf("data%d\r\n",number);
+ lcd.locate(0, 1);
+ lcd.printf("data%d\r\n",number);
+ wait(1.0);
+ goto loop;
+ }
+
+ if (number == 0) {
+ number++;
+ goto loop;
+ }
+
+ fp = fopen(buf, "w");
+ if (fp == NULL) {
+ //pc.printf("Unable to write the file\r\n");
+ lcd.printf("Unable to write the file");
+ } else {
+ fprintf(fp, "WAKTU,V1,V2,V3,V4,VTOTAL\n");
+ pc.printf("File name: data%d\r\n",number);
+ pc.printf("File successfully written!\r\n");
+ lcd.cls();
+ lcd.printf("File successfully\nwritten!\n");
+ lcd.printf("File Name : data%d",number);
+ wait(4.0);
+ }
+
+ //Input Lama Pengujian ===================================================================
+ lcd.cls();
+ lcd.printf("Lama Pengujian:\n1 = 180 Menit\n2 = 300 Menit\n3 = 480 Menit");
+ //pc.printf("Lama Pengujian:\n1 = 180 Menit\n2 = 300 Menit\n3 = 480 Menit");
+ wait(1.0);
+
+
+ while(p==1)
+ {
+ if(mybutton1==0)
+ {
+ lcd.cls();
+ jam=180;
+ lcd.locate(0, 0);
+ lcd.printf("Pengujian 180 Menit\n");
+ pc.printf("Pengujian 180 Menit\n");
+ wait(1.0);
+ z=1;
+ p=0;
+ break;
+ }
+
+ if(mybutton2==0)
+ {
+ lcd.cls();
+ jam=300;
+ lcd.locate(0, 0);
+ lcd.printf("Pengujian 300 Menit\n");
+ pc.printf("Pengujian 300 Menit\n");
+ wait(1.0);
+ z=1;
+ p=0;
+ break;
+ }
+
+ if(mybutton3==0)
+ {
+ lcd.cls();
+ jam=480;
+ lcd.locate(0, 0);
+ lcd.printf("Pengujian 480 Menit\n");
+ pc.printf("Pengujian 480 Menit\n");
+ wait(1.0);
+ z=1;
+ p=0;
+ break;
+ }
+ }
+
+ //Pengukuran Vopen=================================
+ lcd.cls();
+ lcd.printf("Tekan 1 Untuk V Open\n");
+ pc.printf("Tekan 1 Untuk VOPEN\n");
+ wait(1.0);
+
+ while(z==1)
+ {
+ V1 = V1_VALUE.read();
+ V1 = (V1 * 3300*x1)/n;
+
+ V2 = V2_VALUE.read();
+ V2 = ((V2 * 3300)*x2)/n;
+ V2 = V2-V1;
+
+ V3 = V3_VALUE.read();
+ V3 = ((V3 * 3300)*x3)/n;
+ V3 = V3-V1-V2;
+
+ V4 = V4_VALUE.read();
+ V4 = ((V4 * 3300)*x4)/n;
+ V4 = V4-V1-V2-V3;
+
+ VTOTAL=V1+V2+V3+V4;
+
+ if(mybutton1==0)
+ {
+ fprintf(fp,"V Open,%.1f V,%.1f V,%.1f V,%.1fV,%.1f\r\n",V1,V2,V3,V4,VTOTAL);
+ lcd.locate(0, 1);
+ lcd.printf("V Open Telah Diukur");
+ //lcd.locate(1, 2);
+ //lcd.printf("Has been measured");
+ pc.printf("\nVOPEN : Volt V1 = %.1f V, Volt V2 = %.1f V, Volt V3 = %.1f V, Volt V4 = %.1fV VTOTAL=%.1f\r\n",V1,V2,V3,V4,VTOTAL);
+ wait(3.0);
+ z=0;
+ x=1;
+ break;
+ }
+ }
+
+ lcd.cls();
+ lcd.printf("Silahkan beri beban\nTekan run untuk mulai");
+ // pc.printf("Silahkan Beri Beban\n\rTekan Run Untuk Mulai\n\r");
+
+ while(x==1)
+ {
+ V1 = V1_VALUE.read();
+ V1 = (V1 * 3300*x1)/n;
+
+ V2 = V2_VALUE.read();
+ V2 = ((V2 * 3300)*x2)/n;
+ V2 = V2-V1;
+
+ V3 = V3_VALUE.read();
+ V3 = ((V3 * 3300)*x3)/n;
+ V3 = V3-V1-V2;
+
+ V4 = V4_VALUE.read();
+ V4 = ((V4 * 3300)*x4)/n;
+ V4 = V4-V1-V2-V3;
+
+ VTOTAL=V1+V2+V3+V4;
+ abc1=V1;
+ abc2=V2;
+ abc3=V3;
+ abc4=V4;
+ if(mybutton==0)
+ {
+ lcd.cls();
+ fprintf(fp,"0,%.1f V,%.1f V,%.1f V,%.1fV,%.1f\r\n",V1,V2,V3,V4,VTOTAL);
+ lcd.printf("Pengujian Dimulai\n");
+ //pc.printf("0,Volt V1 = %.2f V, Volt V2 = %.2f V, Volt V3 = %.2f V, Volt V4 = %.2fV VTOTAL=%.2f\r\n",V1,V2,V3,V4,VTOTAL);
+ wait(1.0);
+ c=1;
+ x=0;
+ break;
+ }
+ }
+ //Timer Start
+ t.start();
+ t1.start();
+ t2.start();
+ t3.start();
+ t4.start();
+
+
+ float Vsat=10.80;
+ int n=1000;
+
+ ulang:
+ while(c==1)
+ {
+ lcd.cls();
+ d=t.read();
+ d1=t1.read();
+ d2=t2.read();
+ d3=t3.read();
+ d4=t4.read();
+
+ if(d==59)
+ {
+ t.reset();
+ m=m+1;
+
+ }
+ if(d1==59)
+ {
+ t1.reset();
+ m1=m1+1;
+
+ }
+ if(d2==59)
+ {
+ t2.reset();
+ m2=m2+1;
+
+ }
+ if(d3==59)
+ {
+ t3.reset();
+ m3=m3+1;
+
+ }
+
+ //Volt 4 Battery
+ V1 = V1_VALUE.read();
+ V1 = (V1 * 3300*x1)/n;
+ jum1 += V1;
+
+ V2 = V2_VALUE.read();
+ V2 = ((V2 * 3300)*x2)/n;
+ V2 = V2-V1;
+ jum2 += V2;
+
+ V3 = V3_VALUE.read();
+ V3 = ((V3 * 3300)*x3)/n;
+ V3 = V3-V1-V2;
+ jum3 += V3;
+
+ V4 = V4_VALUE.read();
+ V4 = ((V4 * 3300)*x4)/n;
+ V4 = V4-V1-V2-V3;
+ jum4 += V4;
+
+ count++;
+
+
+ stat=((m*100)/jam);
+ stat1=((m1*100)/jam);
+ stat2=((m2*100)/jam);
+ stat3=((m3*100)/jam);
+
+ lcd.cls();
+ if(V1<=Vsat)
+ {
+ lcd.locate(10, 0);
+ lcd.printf("C1=%.1f",stat);
+ lcd.locate(19, 0);
+ lcd.printf("%");
+ t.stop();
+ }
+ if(V2<=Vsat)
+ {
+ lcd.locate(10, 1);
+ lcd.printf("C2=%.1f",stat1);
+ t1.stop();
+ }
+ if(V3<=Vsat)
+ {
+ lcd.locate(10, 2);
+ lcd.printf("C3=%.1f",stat2);
+ t2.stop();
+ }
+ if(V4<=Vsat)
+ {
+ lcd.locate(10, 3);
+ lcd.printf("C4=%.1f",stat3);
+ t3.stop();
+ }
+
+ if((V4<Vsat)||(V3<Vsat)||(V2<Vsat)||(V1<Vsat))
+ {
+ led=!led;
+ }
+ else
+ {
+ lcd.locate(9, 0);
+ lcd.printf("Time:%.0d:%.0f",d3,m3);
+ led=0;
+ }
+
+ while (count == max){
+
+ jum1/=max;
+ jum2/=max;
+ jum3/=max;
+ jum4/=max;
+ VTOTAL = jum1+jum2+jum3+jum4;
+
+ abc1=jum1;
+ abc2=jum2;
+ abc3=jum3;
+ abc4=jum4;
+
+ jum1 = 0;
+ jum2 = 0;
+ jum3 = 0;
+ jum4 = 0;
+ count = 0;
+
+ goto ulang;
+
+ }
+ lcd.locate(0, 0);
+ lcd.printf("V1=%.1fV",abc1);
+ lcd.locate(0, 1);
+ lcd.printf("V2=%.1fV",abc2);
+ lcd.locate(0, 2);
+ lcd.printf("V3=%.1fV",abc3);
+ lcd.locate(0, 3);
+ lcd.printf("V4=%.1fV",abc4);
+ wait(1.0);
+ if(d4>902){
+ fprintf(fp,"%.0f,%.1f V,%.1f V,%.1f V,%.1fV,%.1f\r\n",m,abc1,abc2,abc3,abc4,VTOTAL);
+ //pc.printf("%.0f,Volt V1 = %.2f V, Volt V2 = %.2f V, Volt V3 = %.2f V, Volt V4 = %.2fV VTOTAL=%.2f\r\n",m,V1,V2,V3,V4,VTOTAL);
+ t4.reset();
+ }
+
+ if(mybutton==0)
+ {
+ c=0;
+ led=0;
+ fprintf(fp,"%.0f,%.1f V,%.1f V,%.1f V,%.1fV,%.1f\r\n",m,abc1,abc2,abc3,abc4,VTOTAL);
+ break;
+ }
+ }
+
+ fclose(fp);
+ lcd.cls();
+ lcd.printf(" Pengujian Selesai");
+ //pc.printf("Pengujian Selsai");
+ wait(2.0);
+ goto restart;
+}