ok joy center pin 14 pullup code had to be turned off - why?
Fork of Pushbutton_Debounce_Interrupt by
main.cpp
- Committer:
- avnisha
- Date:
- 2014-02-15
- Revision:
- 1:d5bb7a2e46c2
- Parent:
- 0:cc87c48aa43c
File content as of revision 1:d5bb7a2e46c2:
#include "mbed.h" #include "PinDetect.h" // must import Cookbook PinDetct library into project // URL: http://mbed.org/users/AjK/libraries/PinDetect/lkyxpw DigitalOut myled(LED1); DigitalOut myled2(LED2); DigitalOut myled3(LED3); DigitalOut myled4(LED4); PinDetect pb(p14); // center of joystick // SPST Pushbutton debounced count demo using interrupts and callback // no external PullUp resistor needed // Pushbutton from P8 to GND. // A pb hit generates an interrupt and activates the callback function // after the switch is debounced // Global count variable int volatile count=0; // Callback routine is interrupt activated by a debounced pb hit void pb_hit_callback (void) { count++; myled4 = count & 0x01; myled3 = (count & 0x02)>>1; myled2 = (count & 0x04)>>2; } int main() { // Use internal pullup for pushbutton //pb.mode(PullUp); // don't do this for app board // Delay for initial pullup to take effect wait(.01); // Setup Interrupt callback function for a pb hit pb.attach_deasserted(&pb_hit_callback); // Start sampling pb input using interrupts pb.setSampleFrequency(); //Blink myled in main routine forever while responding to pb changes // via interrupts that activate the callback counter function while (1) { myled = !myled; wait(.5); } }