Arturo Pesaro
cc3100_Socket_Wifi_Server with Ethernet Interface not working
Dependencies: EthernetInterface mbed-rtos mbed
Fork of
cc3100_Test_Demo
by 
David Fletcher
simplelink/cc3100_netapp.h
- Committer:
- dflet
- Date:
- 2015-03-19
- Revision:
- 6:778b081f6a13
File content as of revision 6:778b081f6a13:
/*
* netapp.h - CC31xx/CC32xx Host Driver Implementation
*
* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/*****************************************************************************/
/* Include files */
/*****************************************************************************/
#include "cc3100_simplelink.h"
#ifndef NETAPP_H_
#define NETAPP_H_
#include "cc3100_protocol.h"
#include "cc3100_nonos.h"
namespace mbed_cc3100 {
/*!
\addtogroup netapp
@{
*/
/*****************************************************************************/
/* Macro declarations */
/*****************************************************************************/
/*ERROR code*/
const int16_t SL_ERROR_NETAPP_RX_BUFFER_LENGTH_ERROR = (-230);
/* Http Server interface */
const uint8_t MAX_INPUT_STRING = (64); /* because of WPA */
const uint8_t MAX_AUTH_NAME_LEN = (20);
const uint8_t MAX_AUTH_PASSWORD_LEN = (20);
const uint8_t MAX_AUTH_REALM_LEN = (20);
const uint8_t MAX_DEVICE_URN_LEN = (15+1);
const uint8_t MAX_DOMAIN_NAME_LEN = (24+1);
const uint8_t MAX_ACTION_LEN = (30);
/* Important: in case the max len is changed, make sure the struct sl_NetAppHttpServerSendToken_t in protocol.h is padded correctly! */
const uint8_t MAX_TOKEN_NAME_LEN = (20);
const uint8_t MAX_TOKEN_VALUE_LEN = MAX_INPUT_STRING;
const int16_t NETAPP_MAX_SERVICE_TEXT_SIZE = (256);
const uint8_t NETAPP_MAX_SERVICE_NAME_SIZE = (60);
const uint8_t NETAPP_MAX_SERVICE_HOST_NAME_SIZE = (64);
/* Server Responses */
const uint8_t SL_NETAPP_RESPONSE_NONE = (0);
const uint8_t SL_NETAPP_HTTPSETTOKENVALUE = (1);
const uint8_t SL_NETAPP_FAMILY_MASK = (0x80);
/* mDNS types */
const uint32_t SL_NET_APP_MASK_IPP_TYPE_OF_SERVICE = (0x00000001);
const uint32_t SL_NET_APP_MASK_DEVICE_INFO_TYPE_OF_SERVICE = (0x00000002);
const uint32_t SL_NET_APP_MASK_HTTP_TYPE_OF_SERVICE = (0x00000004);
const uint32_t SL_NET_APP_MASK_HTTPS_TYPE_OF_SERVICE = (0x00000008);
const uint32_t SL_NET_APP_MASK_WORKSATION_TYPE_OF_SERVICE = (0x00000010);
const uint32_t SL_NET_APP_MASK_GUID_TYPE_OF_SERVICE = (0x00000020);
const uint32_t SL_NET_APP_MASK_H323_TYPE_OF_SERVICE = (0x00000040);
const uint32_t SL_NET_APP_MASK_NTP_TYPE_OF_SERVICE = (0x00000080);
const uint32_t SL_NET_APP_MASK_OBJECITVE_TYPE_OF_SERVICE = (0x00000100);
const uint32_t SL_NET_APP_MASK_RDP_TYPE_OF_SERVICE = (0x00000200);
const uint32_t SL_NET_APP_MASK_REMOTE_TYPE_OF_SERVICE = (0x00000400);
const uint32_t SL_NET_APP_MASK_RTSP_TYPE_OF_SERVICE = (0x00000800);
const uint32_t SL_NET_APP_MASK_SIP_TYPE_OF_SERVICE = (0x00001000);
const uint32_t SL_NET_APP_MASK_SMB_TYPE_OF_SERVICE = (0x00002000);
const uint32_t SL_NET_APP_MASK_SOAP_TYPE_OF_SERVICE = (0x00004000);
const uint32_t SL_NET_APP_MASK_SSH_TYPE_OF_SERVICE = (0x00008000);
const uint32_t SL_NET_APP_MASK_TELNET_TYPE_OF_SERVICE = (0x00010000);
const uint32_t SL_NET_APP_MASK_TFTP_TYPE_OF_SERVICE = (0x00020000);
const uint32_t SL_NET_APP_MASK_XMPP_CLIENT_TYPE_OF_SERVICE = (0x00040000);
const uint32_t SL_NET_APP_MASK_RAOP_TYPE_OF_SERVICE = (0x00080000);
const uint32_t SL_NET_APP_MASK_ALL_TYPE_OF_SERVICE = (0xFFFFFFFF);
/********************************************************************************************************/
/* sl_NetAppDnsGetHostByName error codes */
const int16_t SL_NET_APP_DNS_QUERY_NO_RESPONSE = (-159); /* DNS query failed, no response */
const int16_t SL_NET_APP_DNS_NO_SERVER = (-161); /* No DNS server was specified */
const int16_t SL_NET_APP_DNS_PARAM_ERROR = (-162); /* mDNS parameters error */
const int16_t SL_NET_APP_DNS_QUERY_FAILED = (-163); /* DNS query failed; no DNS server sent an 'answer' */
const int16_t SL_NET_APP_DNS_INTERNAL_1 = (-164);
const int16_t SL_NET_APP_DNS_INTERNAL_2 = (-165);
const int16_t SL_NET_APP_DNS_MALFORMED_PACKET = (-166); /* Improperly formed or corrupted DNS packet received */
const int16_t SL_NET_APP_DNS_INTERNAL_3 = (-167);
const int16_t SL_NET_APP_DNS_INTERNAL_4 = (-168);
const int16_t SL_NET_APP_DNS_INTERNAL_5 = (-169);
const int16_t SL_NET_APP_DNS_INTERNAL_6 = (-170);
const int16_t SL_NET_APP_DNS_INTERNAL_7 = (-171);
const int16_t SL_NET_APP_DNS_INTERNAL_8 = (-172);
const int16_t SL_NET_APP_DNS_INTERNAL_9 = (-173);
const int16_t SL_NET_APP_DNS_MISMATCHED_RESPONSE = (-174); /* Server response type does not match the query request*/
const int16_t SL_NET_APP_DNS_INTERNAL_10 = (-175);
const int16_t SL_NET_APP_DNS_INTERNAL_11 = (-176);
const int16_t SL_NET_APP_DNS_NO_ANSWER = (-177); /* No response for one-shot query */
const int16_t SL_NET_APP_DNS_NO_KNOWN_ANSWER = (-178); /* No known answer for query */
const int16_t SL_NET_APP_DNS_NAME_MISMATCH = (-179); /* Illegal service name according to the RFC */
const int16_t SL_NET_APP_DNS_NOT_STARTED = (-180); /* mDNS is not running */
const int16_t SL_NET_APP_DNS_HOST_NAME_ERROR = (-181); /* Host name error. Host name format is not allowed according to RFC 1033,1034,1035, 6763 */
const int16_t SL_NET_APP_DNS_NO_MORE_ENTRIES = (-182); /* No more entries be found. */
const int16_t SL_NET_APP_DNS_MAX_SERVICES_ERROR = (-200); /* Maximum advertise services are already configured */
const int16_t SL_NET_APP_DNS_IDENTICAL_SERVICES_ERROR = (-201); /* Trying to register a service that is already exists */
const int16_t SL_NET_APP_DNS_NOT_EXISTED_SERVICE_ERROR = (-203); /* Trying to delete service that does not existed */
const int16_t SL_NET_APP_DNS_ERROR_SERVICE_NAME_ERROR = (-204); /* Illegal service name according to the RFC */
const int16_t SL_NET_APP_DNS_RX_PACKET_ALLOCATION_ERROR = (-205); /* Retry request */
const int16_t SL_NET_APP_DNS_BUFFER_SIZE_ERROR = (-206); /* List size buffer is bigger than internally allowed in the NWP */
const int16_t SL_NET_APP_DNS_NET_APP_SET_ERROR = (-207); /* Illegal length of one of the mDNS Set functions */
const int16_t SL_NET_APP_DNS_GET_SERVICE_LIST_FLAG_ERROR = (-208);
const int16_t SL_NET_APP_DNS_NO_CONFIGURATION_ERROR = (-209);
/* Set Dev name error codes (NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN) */
const int16_t SL_ERROR_DEVICE_NAME_LEN_ERR = (-117);
const int16_t SL_ERROR_DEVICE_NAME_INVALID = (-118);
/* Set domain name error codes (NETAPP_SET_GET_DEV_CONF_OPT_DOMAIN_NAME) */
const int16_t SL_ERROR_DOMAIN_NAME_LEN_ERR = (-119);
const int16_t SL_ERROR_DOMAIN_NAME_INVALID = (-120);
/********************************************************************************************************/
/* NetApp application IDs */
const uint8_t SL_NET_APP_HTTP_SERVER_ID = (1);
const uint8_t SL_NET_APP_DHCP_SERVER_ID = (2);
const uint8_t SL_NET_APP_MDNS_ID = (4);
const uint8_t SL_NET_APP_DNS_SERVER_ID = (8);
const uint8_t SL_NET_APP_DEVICE_CONFIG_ID = (16);
/* NetApp application set/get options */
const uint8_t NETAPP_SET_DHCP_SRV_BASIC_OPT = (0);
/* HTTP server set/get options */
const uint8_t NETAPP_SET_GET_HTTP_OPT_PORT_NUMBER = (0);
const uint8_t NETAPP_SET_GET_HTTP_OPT_AUTH_CHECK = (1);
const uint8_t NETAPP_SET_GET_HTTP_OPT_AUTH_NAME = (2);
const uint8_t NETAPP_SET_GET_HTTP_OPT_AUTH_PASSWORD = (3);
const uint8_t NETAPP_SET_GET_HTTP_OPT_AUTH_REALM = (4);
const uint8_t NETAPP_SET_GET_HTTP_OPT_ROM_PAGES_ACCESS = (5);
const uint8_t NETAPP_SET_GET_MDNS_CONT_QUERY_OPT = (1);
const uint8_t NETAPP_SET_GET_MDNS_QEVETN_MASK_OPT = (2);
const uint8_t NETAPP_SET_GET_MDNS_TIMING_PARAMS_OPT = (3);
/* DNS server set/get options */
const uint8_t NETAPP_SET_GET_DNS_OPT_DOMAIN_NAME = (0);
/* Device Config set/get options */
const uint8_t NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN = (0);
const uint8_t NETAPP_SET_GET_DEV_CONF_OPT_DOMAIN_NAME = (1);
/*****************************************************************************/
/* Structure/Enum declarations */
/*****************************************************************************/
/*
* The below structure depict the constant parameters that are returned in the Async event answer
* according to command/API sl_DnsGetHostByService for IPv4 and IPv6.
*
1Status - The status of the response.
2.Address - Contains the IP address of the service.
3.Port - Contains the port of the service.
4.TextLen - Contains the max length of the text that the user wants to get.
it means that if the test of service is bigger that its value than
the text is cut to inout_TextLen value.
Output: Contain the length of the text that is returned. Can be full text or part
of the text (see above).
*
*/
typedef struct {
uint16_t Status;
uint16_t TextLen;
uint32_t Port;
uint32_t Address;
} _GetHostByServiceIPv4AsyncResponse_t;
/*
* The below struct contains pointers to the output parameters that the user gives
*
*/
typedef struct {
int16_t Status;
uint32_t *out_pAddr;
uint32_t *out_pPort;
uint16_t *inout_TextLen; // in: max len , out: actual len
unsigned char *out_pText;
} _GetHostByServiceAsyncResponse_t;
typedef struct {
uint32_t PacketsSent;
uint32_t PacketsReceived;
uint16_t MinRoundTime;
uint16_t MaxRoundTime;
uint16_t AvgRoundTime;
uint32_t TestTime;
} SlPingReport_t;
typedef struct {
uint32_t PingIntervalTime; /* delay between pings, in milliseconds */
uint16_t PingSize; /* ping packet size in bytes */
uint16_t PingRequestTimeout; /* timeout time for every ping in milliseconds */
uint32_t TotalNumberOfAttempts; /* max number of ping requests. 0 - forever */
uint32_t Flags; /* flag - 0 report only when finished, 1 - return response for every ping, 2 - stop after 1 successful ping. */
uint32_t Ip; /* IPv4 address or IPv6 first 4 bytes */
uint32_t Ip1OrPaadding;
uint32_t Ip2OrPaadding;
uint32_t Ip3OrPaadding;
} SlPingStartCommand_t;
typedef struct _slHttpServerString_t {
uint8_t len;
uint8_t *data;
} slHttpServerString_t;
typedef struct _slHttpServerData_t {
uint8_t value_len;
uint8_t name_len;
uint8_t *token_value;
uint8_t *token_name;
} slHttpServerData_t;
typedef struct _slHttpServerPostData_t {
slHttpServerString_t action;
slHttpServerString_t token_name;
slHttpServerString_t token_value;
} slHttpServerPostData_t;
typedef union {
slHttpServerString_t httpTokenName; /* SL_NETAPP_HTTPGETTOKENVALUE */
slHttpServerPostData_t httpPostData; /* SL_NETAPP_HTTPPOSTTOKENVALUE */
} SlHttpServerEventData_u;
typedef union {
slHttpServerString_t token_value;
} SlHttpServerResponsedata_u;
typedef struct {
uint32_t Event;
SlHttpServerEventData_u EventData;
} SlHttpServerEvent_t;
typedef struct {
uint32_t Response;
SlHttpServerResponsedata_u ResponseData;
} SlHttpServerResponse_t;
typedef struct {
uint32_t lease_time;
uint32_t ipv4_addr_start;
uint32_t ipv4_addr_last;
} SlNetAppDhcpServerBasicOpt_t;
/*mDNS parameters*/
typedef enum {
SL_NET_APP_FULL_SERVICE_WITH_TEXT_IPV4_TYPE = 1,
SL_NET_APP_FULL_SERVICE_IPV4_TYPE,
SL_NET_APP_SHORT_SERVICE_IPV4_TYPE
} SlNetAppGetServiceListType_e;
typedef struct {
uint32_t service_ipv4;
uint16_t service_port;
uint16_t Reserved;
} SlNetAppGetShortServiceIpv4List_t;
typedef struct {
uint32_t service_ipv4;
uint16_t service_port;
uint16_t Reserved;
uint8_t service_name[NETAPP_MAX_SERVICE_NAME_SIZE];
uint8_t service_host[NETAPP_MAX_SERVICE_HOST_NAME_SIZE];
} SlNetAppGetFullServiceIpv4List_t;
typedef struct {
uint32_t service_ipv4;
uint16_t service_port;
uint16_t Reserved;
uint8_t service_name[NETAPP_MAX_SERVICE_NAME_SIZE];
uint8_t service_host[NETAPP_MAX_SERVICE_HOST_NAME_SIZE];
uint8_t service_text[NETAPP_MAX_SERVICE_TEXT_SIZE];
} SlNetAppGetFullServiceWithTextIpv4List_t;
typedef struct {
/*The below parameters are used to configure the advertise times and interval
For example:
If:
Period is set to T
Repetitions are set to P
Telescopic factor is K=2
The transmission shall be:
advertise P times
wait T
advertise P times
wait 4 * T
advertise P time
wait 16 * T ... (till max time reached / configuration changed / query issued)
*/
uint32_t t; /* Number of ticks for the initial period. Default is 100 ticks for 1 second. */
uint32_t p; /* Number of repetitions. Default value is 1 */
uint32_t k; /* Telescopic factor. Default value is 2. */
uint32_t RetransInterval;/* Announcing retransmission interval */
uint32_t Maxinterval; /* Announcing max period interval */
uint32_t max_time; /* Announcing max time */
} SlNetAppServiceAdvertiseTimingParameters_t;
/*****************************************************************************/
/* Types declarations */
/*****************************************************************************/
typedef void (*P_SL_DEV_PING_CALLBACK)(SlPingReport_t*);
extern P_SL_DEV_PING_CALLBACK pPingCallBackFunc;
/*****************************************************************************************
* NETAPP structs
******************************************************************************************/
typedef _BasicResponse_t _NetAppStartStopResponse_t;
typedef struct {
uint32_t appId;
} _NetAppStartStopCommand_t;
typedef struct {
uint16_t Status;
uint16_t AppId;
uint16_t ConfigOpt;
uint16_t ConfigLen;
} _NetAppSetGet_t;
typedef struct {
uint16_t port_number;
} _NetAppHttpServerGetSet_port_num_t;
typedef struct {
uint8_t auth_enable;
} _NetAppHttpServerGetSet_auth_enable_t;
typedef struct _sl_NetAppHttpServerGetToken_t {
uint8_t token_name_len;
uint8_t padd1;
uint16_t padd2;
} sl_NetAppHttpServerGetToken_t;
typedef struct _sl_NetAppHttpServerSendToken_t {
uint8_t token_value_len;
uint8_t token_name_len;
uint8_t token_name[MAX_TOKEN_NAME_LEN];
uint16_t padd;
} sl_NetAppHttpServerSendToken_t;
typedef struct _sl_NetAppHttpServerPostToken_t {
uint8_t post_action_len;
uint8_t token_name_len;
uint8_t token_value_len;
uint8_t padding;
} sl_NetAppHttpServerPostToken_t;
typedef struct {
uint16_t Len;
uint8_t family;
uint8_t padding;
} _GetHostByNameCommand_t;
typedef struct {
uint16_t status;
uint16_t padding;
uint32_t ip0;
uint32_t ip1;
uint32_t ip2;
uint32_t ip3;
} _GetHostByNameIPv6AsyncResponse_t;
typedef struct {
uint16_t status;
uint8_t padding1;
uint8_t padding2;
uint32_t ip0;
} _GetHostByNameIPv4AsyncResponse_t;
typedef enum {
CTST_BSD_UDP_TX,
CTST_BSD_UDP_RX,
CTST_BSD_TCP_TX,
CTST_BSD_TCP_RX,
CTST_BSD_TCP_SERVER_BI_DIR,
CTST_BSD_TCP_CLIENT_BI_DIR,
CTST_BSD_UDP_BI_DIR,
CTST_BSD_RAW_TX,
CTST_BSD_RAW_RX,
CTST_BSD_RAW_BI_DIR,
CTST_BSD_SECURED_TCP_TX,
CTST_BSD_SECURED_TCP_RX,
CTST_BSD_SECURED_TCP_SERVER_BI_DIR,
CTST_BSD_SECURED_TCP_CLIENT_BI_DIR
} CommTest_e;
typedef struct _sl_protocol_CtestStartCommand_t {
uint32_t Test;
uint16_t DestPort;
uint16_t SrcPort;
uint32_t DestAddr[4];
uint32_t PayloadSize;
uint32_t timeout;
uint32_t csEnabled;
uint32_t secure;
uint32_t rawProtocol;
uint8_t reserved1[4];
} _CtestStartCommand_t;
typedef struct {
uint8_t test;
uint8_t socket;
int16_t status;
uint32_t startTime;
uint32_t endTime;
uint16_t txKbitsSec;
uint16_t rxKbitsSec;
uint32_t outOfOrderPackets;
uint32_t missedPackets;
int16_t token;
} _CtestAsyncResponse_t;
typedef struct {
uint32_t pingIntervalTime;
uint16_t PingSize;
uint16_t pingRequestTimeout;
uint32_t totalNumberOfAttempts;
uint32_t flags;
uint32_t ip0;
uint32_t ip1OrPaadding;
uint32_t ip2OrPaadding;
uint32_t ip3OrPaadding;
} _PingStartCommand_t;
typedef struct {
uint16_t status;
uint16_t rttMin;
uint16_t rttMax;
uint16_t rttAvg;
uint32_t numSuccsessPings;
uint32_t numSendsPings;
uint32_t testTime;
} _PingReportResponse_t;
typedef struct {
uint32_t ip;
uint32_t gateway;
uint32_t dns;
} _IpV4AcquiredAsync_t;
typedef enum {
ACQUIRED_IPV6_LOCAL = 1,
ACQUIRED_IPV6_GLOBAL
} IpV6AcquiredType_e;
typedef struct {
uint32_t type;
uint32_t ip[4];
uint32_t gateway[4];
uint32_t dns[4];
} _IpV6AcquiredAsync_t;
typedef union {
_SocketCommand_t EventMask;
_sendRecvCommand_t DeviceInit;
} _device_commands_t;
class cc3100_netapp
{
public:
cc3100_netapp(cc3100_driver &driver, cc3100_nonos &nonos);
~cc3100_netapp();
/*****************************************************************************/
/* Functions prototypes */
/*****************************************************************************/
int16_t sl_NetAppMDNSRegisterUnregisterService(const char* pServiceName,
const uint8_t ServiceNameLen,
const char* pText,
const uint8_t TextLen,
const uint16_t Port,
const uint32_t TTL,
const uint32_t Options);
void _sl_HandleAsync_DnsGetHostByAddr(void *pVoidBuf);
void CopyPingResultsToReport(_PingReportResponse_t *pResults,SlPingReport_t *pReport);
#if defined(sl_HttpServerCallback) || defined(EXT_LIB_REGISTERED_HTTP_SERVER_EVENTS)
uint16_t sl_NetAppSendTokenValue(slHttpServerData_t * Token);
#endif
// uint16_t sl_NetAppSendTokenValue(slHttpServerData_t * Token);
/*****************************************************************************/
/* Function prototypes */
/*****************************************************************************/
/*!
\brief Starts a network application
Gets and starts network application for the current WLAN mode
\param[in] AppBitMap application bitmap, could be one or combination of the following: \n
- SL_NET_APP_HTTP_SERVER_ID
- SL_NET_APP_DHCP_SERVER_ID
- SL_NET_APP_MDNS_ID
\return On error, negative number is returned
\sa Stop one or more the above started applications using sl_NetAppStop
\note This command activates the application for the current WLAN mode (AP or STA)
\warning
\par Example:
\code
For example: Starting internal HTTP server + DHCP server:
sl_NetAppStart(SL_NET_APP_HTTP_SERVER_ID | SL_NET_APP_DHCP_SERVER_ID)
\endcode
*/
#if _SL_INCLUDE_FUNC(sl_NetAppStart)
int16_t sl_NetAppStart(const uint32_t AppBitMap);
#endif
/*!
\brief Stops a network application
Gets and stops network application for the current WLAN mode
\param[in] AppBitMap application id, could be one of the following: \n
- SL_NET_APP_HTTP_SERVER_ID
- SL_NET_APP_DHCP_SERVER_ID
- SL_NET_APP_MDNS_ID
\return On error, negative number is returned
\sa
\note This command disables the application for the current active WLAN mode (AP or STA)
\warning
\par Example:
\code
For example: Stopping internal HTTP server:
sl_NetAppStop(SL_NET_APP_HTTP_SERVER_ID);
\endcode
*/
#if _SL_INCLUDE_FUNC(sl_NetAppStop)
int16_t sl_NetAppStop(const uint32_t AppBitMap);
#endif
/*!
\brief Get host IP by name
Obtain the IP Address of machine on network, by machine name.
\param[in] hostname host name
\param[in] usNameLen name length
\param[out] out_ip_addr This parameter is filled in with
host IP address. In case that host name is not
resolved, out_ip_addr is zero.
\param[in] family protocol family
\return On success, 0 is returned.
On error, negative is returned
SL_POOL_IS_EMPTY may be return in case there are no resources in the system
In this case try again later or increase MAX_CONCURRENT_ACTIONS
Possible DNS error codes:
- SL_NET_APP_DNS_QUERY_NO_RESPONSE
- SL_NET_APP_DNS_NO_SERVER
- SL_NET_APP_DNS_QUERY_FAILED
- SL_NET_APP_DNS_MALFORMED_PACKET
- SL_NET_APP_DNS_MISMATCHED_RESPONSE
\sa
\note Only one sl_NetAppDnsGetHostByName can be handled at a time.
Calling this API while the same command is called from another thread, may result
in one of the two scenarios:
1. The command will wait (internal) until the previous command finish, and then be executed.
2. There are not enough resources and POOL_IS_EMPTY error will return.
In this case, MAX_CONCURRENT_ACTIONS can be increased (result in memory increase) or try
again later to issue the command.
\warning
In case an IP address in a string format is set as input, without any prefix (e.g. "1.2.3.4") the device will not
try to access the DNS and it will return the input address on the 'out_ip_addr' field
\par Example:
\code
uint32_t DestinationIP;
sl_NetAppDnsGetHostByName("www.google.com", strlen("www.google.com"), &DestinationIP,SL_AF_INET);
Addr.sin_family = SL_AF_INET;
Addr.sin_port = sl_Htons(80);
Addr.sin_addr.s_addr = sl_Htonl(DestinationIP);
AddrSize = sizeof(SlSockAddrIn_t);
SockID = sl_Socket(SL_AF_INET,SL_SOCK_STREAM, 0);
\endcode
*/
#if _SL_INCLUDE_FUNC(sl_NetAppDnsGetHostByName)
int16_t sl_NetAppDnsGetHostByName(unsigned char * hostname, const uint16_t usNameLen, uint32_t* out_ip_addr, const uint8_t family );
#endif
/*!
\brief Return service attributes like IP address, port and text according to service name
\par
The user sets a service name Full/Part (see example below), and should get:
- IP of service
- The port of service
- The text of service
Hence it can make a connection to the specific service and use it.
It is similar to get host by name method.
It is done by a single shot query with PTR type on the service name.
The command that is sent is from constant parameters and variables parameters.
\param[in] pService Service name can be full or partial. \n
Example for full service name:
1. PC1._ipp._tcp.local
2. PC2_server._ftp._tcp.local \n
.
Example for partial service name:
1. _ipp._tcp.local
2. _ftp._tcp.local
\param[in] ServiceLen The length of the service name (in_pService).
\param[in] Family IPv4 or IPv6 (SL_AF_INET , SL_AF_INET6).
\param[out] pAddr Contains the IP address of the service.
\param[out] pPort Contains the port of the service.
\param[out] pTextLen Has 2 options. One as Input field and the other one as output:
- Input: \n
Contains the max length of the text that the user wants to get.\n
It means that if the text len of service is bigger that its value than
the text is cut to inout_TextLen value.
- Output: \n
Contain the length of the text that is returned. Can be full text or part of the text (see above).
\param[out] pOut_pText Contains the text of the service full or partial
\return On success, zero is returned
SL_POOL_IS_EMPTY may be return in case there are no resources in the system
In this case try again later or increase MAX_CONCURRENT_ACTIONS
In case No service is found error SL_NET_APP_DNS_NO_ANSWER will be returned
\note The returns attributes belongs to the first service found.
There may be other services with the same service name that will response to the query.
The results of these responses are saved in the peer cache of the Device and should be read by another API.
Only one sl_NetAppDnsGetHostByService can be handled at a time.
Calling this API while the same command is called from another thread, may result
in one of the two scenarios:
1. The command will wait (internal) until the previous command finish, and then be executed.
2. There are not enough resources and SL_POOL_IS_EMPTY error will return.
In this case, MAX_CONCURRENT_ACTIONS can be increased (result in memory increase) or try
again later to issue the command.
\warning Text length can be 120 bytes only
*/
#if _SL_INCLUDE_FUNC(sl_NetAppDnsGetHostByService)
int32_t sl_NetAppDnsGetHostByService(unsigned char *pServiceName, /* string containing all (or only part): name + subtype + service */
const uint8_t ServiceLen,
const uint8_t Family, /* 4-IPv4 , 16-IPv6 */
uint32_t pAddr[],
uint32_t *pPort,
uint16_t *pTextLen, /* in: max len , out: actual len */
unsigned char *pText
);
#endif
/*!
\brief Get service List
Insert into out pBuffer a list of peer's services that are the NWP.
The list is in a form of service struct. The user should chose the type
of the service struct like:
- Full service parameters with text.
- Full service parameters.
- Short service parameters (port and IP only) especially for tiny hosts.
The different types of struct are made to give the
Possibility to save memory in the host
The user also chose how many max services to get and start point index
NWP peer cache.
For example:
1. Get max of 3 full services from index 0.Up to 3 full services
from index 0 are inserted into pBuffer (services that are in indexes 0,1,2).
2. Get max of 4 full services from index 3.Up to 4 full services
from index 3 are inserted into pBuffer (services that are in indexes 3,4,5,6).
3. Get max of 2 int services from index 6.Up to 2 int services
from index 6 are inserted into pBuffer (services that are in indexes 6,7).
See below - command parameters.
\param[in] indexOffset - The start index in the peer cache that from it the first service is returned.
\param[in] MaxServiceCount - The Max services that can be returned if existed or if not exceed the max index
in the peer cache
\param[in] Flags - an ENUM number that means which service struct to use (means which types of service to fill)
- use SlNetAppGetFullServiceWithTextIpv4List_t
- use SlNetAppGetFullServiceIpv4List_t
- use SlNetAppGetShortServiceIpv4List_t
\param[out] Buffer - The Services are inserted into this buffer. In the struct form according to the bit that is set in the Flags
input parameter.
\return ServiceFoundCount - The number of the services that were inserted into the buffer. zero means no service is found
negative number means an error
\sa sl_NetAppMDNSRegisterService
\note
\warning
if the out pBuffer size is bigger than an RX packet(1480), than
an error is returned because there
is no place in the RX packet.
The size is a multiply of MaxServiceCount and size of service struct(that is set
according to flag value).
*/
#if _SL_INCLUDE_FUNC(sl_NetAppGetServiceList)
int16_t sl_NetAppGetServiceList(const uint8_t IndexOffest,
const uint8_t MaxServiceCount,
const uint8_t Flags,
int8_t *pBuffer,
const uint32_t RxBufferLength
);
#endif
/*!
\brief Unregister mDNS service
This function deletes the mDNS service from the mDNS package and the database.
The mDNS service that is to be unregistered is a service that the application no longer wishes to provide. \n
The service name should be the full service name according to RFC
of the DNS-SD - meaning the value in name field in the SRV answer.
Examples for service names:
1. PC1._ipp._tcp.local
2. PC2_server._ftp._tcp.local
\param[in] pServiceName Full service name. \n
Example for service name:
1. PC1._ipp._tcp.local
2. PC2_server._ftp._tcp.local
\param[in] ServiceLen The length of the service.
\return On success, zero is returned
\sa sl_NetAppMDNSRegisterService
\note
\warning
The size of the service length should be smaller than 255.
*/
#if _SL_INCLUDE_FUNC(sl_NetAppMDNSUnRegisterService)
int16_t sl_NetAppMDNSUnRegisterService(const char *pServiceName, const uint8_t ServiceNameLen);
#endif
/*!
\brief Register a new mDNS service
\par
This function registers a new mDNS service to the mDNS package and the DB.
This registered service is a service offered by the application.
The service name should be full service name according to RFC
of the DNS-SD - meaning the value in name field in the SRV answer.
Example for service name:
1. PC1._ipp._tcp.local
2. PC2_server._ftp._tcp.local
If the option is_unique is set, mDNS probes the service name to make sure
it is unique before starting to announce the service on the network.
Instance is the instance portion of the service name.
\param[in] ServiceLen The length of the service.
\param[in] TextLen The length of the service should be smaller than 64.
\param[in] port The port on this target host port.
\param[in] TTL The TTL of the service
\param[in] Options bitwise parameters: \n
- bit 0 - service is unique (means that the service needs to be unique)
- bit 31 - for internal use if the service should be added or deleted (set means ADD).
- bit 1-30 for future.
\param[in] pServiceName The service name.
Example for service name: \n
1. PC1._ipp._tcp.local
2. PC2_server._ftp._tcp.local
\param[in] pText The description of the service.
should be as mentioned in the RFC
(according to type of the service IPP,FTP...)
\return On success, zero is returned
Possible error codes:
- Maximum advertise services are already configured.
Delete another existed service that is registered and then register again the new service
- Trying to register a service that is already exists
- Trying to delete service that does not existed
- Illegal service name according to the RFC
- Retry request
- Illegal length of one of the mDNS Set functions
- mDNS is not operational as the device has no IP.Connect the device to an AP to get an IP address.
- mDNS parameters error
- mDNS internal cache error
- mDNS internal error
- Adding a service is not allowed as it is already exist (duplicate service)
- mDNS is not running
- Host name error. Host name format is not allowed according to RFC 1033,1034,1035, 6763
- List size buffer is bigger than internally allowed in the NWP (API get service list),
change the APIs� parameters to decrease the size of the list
\sa sl_NetAppMDNSUnRegisterService
\warning 1) Temporary - there is an allocation on stack of internal buffer.
Its size is NETAPP_MDNS_MAX_SERVICE_NAME_AND_TEXT_LENGTH. \n
It means that the sum of the text length and service name length cannot be bigger than
NETAPP_MDNS_MAX_SERVICE_NAME_AND_TEXT_LENGTH.\n
If it is - An error is returned. \n
2) According to now from certain constraints the variables parameters are set in the
attribute part (contain constant parameters)
*/
#if _SL_INCLUDE_FUNC(sl_NetAppMDNSRegisterService)
int16_t sl_NetAppMDNSRegisterService( const char* pServiceName,
const uint8_t ServiceNameLen,
const char* pText,
const uint8_t TextLen,
const uint16_t Port,
const uint32_t TTL,
uint32_t Options);
#endif
/*!
\brief send ICMP ECHO_REQUEST to network hosts
Ping uses the ICMP protocol's mandatory ECHO_REQUEST
\param[in] pPingParams Pointer to the ping request structure: \n
- if flags parameter is set to 0, ping will report back once all requested pings are done (as defined by TotalNumberOfAttempts). \n
- if flags parameter is set to 1, ping will report back after every ping, for TotalNumberOfAttempts.
- if flags parameter is set to 2, ping will stop after the first successful ping, and report back for the successful ping, as well as any preceding failed ones.
For stopping an ongoing ping activity, set parameters IP address to 0
\param[in] family SL_AF_INET or SL_AF_INET6
\param[out] pReport Ping pReport
\param[out] pCallback Callback function upon completion.
If callback is NULL, the API is blocked until data arrives
\return On success, zero is returned. On error, -1 is returned
SL_POOL_IS_EMPTY may be return in case there are no resources in the system
In this case try again later or increase MAX_CONCURRENT_ACTIONS
\sa sl_NetAppPingReport
\note Only one sl_NetAppPingStart can be handled at a time.
Calling this API while the same command is called from another thread, may result
in one of the two scenarios:
1. The command will wait (internal) until the previous command finish, and then be executed.
2. There are not enough resources and SL_POOL_IS_EMPTY error will return.
In this case, MAX_CONCURRENT_ACTIONS can be increased (result in memory increase) or try
again later to issue the command.
\warning
\par Example:
\code
An example of sending 20 ping requests and reporting results to a callback routine when
all requests are sent:
// callback routine
void pingRes(SlPingReport_t* pReport)
{
// handle ping results
}
// ping activation
void PingTest()
{
SlPingReport_t report;
SlPingStartCommand_t pingCommand;
pingCommand.Ip = SL_IPV4_VAL(10,1,1,200); // destination IP address is 10.1.1.200
pingCommand.PingSize = 150; // size of ping, in bytes
pingCommand.PingIntervalTime = 100; // delay between pings, in milliseconds
pingCommand.PingRequestTimeout = 1000; // timeout for every ping in milliseconds
pingCommand.TotalNumberOfAttempts = 20; // max number of ping requests. 0 - forever
pingCommand.Flags = 0; // report only when finished
sl_NetAppPingStart( &pingCommand, SL_AF_INET, &report, pingRes ) ;
}
\endcode
*/
#if _SL_INCLUDE_FUNC(sl_NetAppPingStart)
int16_t sl_NetAppPingStart(const SlPingStartCommand_t* pPingParams, const uint8_t family,SlPingReport_t *pReport, const P_SL_DEV_PING_CALLBACK pPingCallback);
#endif
/*!
\brief Internal function for setting network application configurations
\return On success, zero is returned. On error, -1 is
returned
\param[in] AppId Application id, could be one of the following: \n
- SL_NET_APP_HTTP_SERVER_ID
- SL_NET_APP_DHCP_SERVER_ID
- SL_NET_APP_MDNS_ID
- SL_NET_APP_DEVICE_CONFIG_ID
\param[in] SetOptions set option, could be one of the following: \n
- SL_NET_APP_DHCP_SERVER_ID
- NETAPP_SET_DHCP_SRV_BASIC_OPT
- SL_NET_APP_HTTP_SERVER_ID
- NETAPP_SET_GET_HTTP_OPT_PORT_NUMBER
- NETAPP_SET_GET_HTTP_OPT_AUTH_CHECK
- NETAPP_SET_GET_HTTP_OPT_AUTH_NAME
- NETAPP_SET_GET_HTTP_OPT_AUTH_PASSWORD
- NETAPP_SET_GET_HTTP_OPT_AUTH_REALM
- NETAPP_SET_GET_HTTP_OPT_ROM_PAGES_ACCESS
- SL_NET_APP_MDNS_ID
- NETAPP_SET_GET_MDNS_CONT_QUERY_OPT
- NETAPP_SET_GET_MDNS_QEVETN_MASK_OPT
- NETAPP_SET_GET_MDNS_TIMING_PARAMS_OPT
- SL_NET_APP_DEVICE_CONFIG_ID
- NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN
- NETAPP_SET_GET_DEV_CONF_OPT_DOMAIN_NAME
\param[in] OptionLen option structure length
\param[in] pOptionValues pointer to the option structure
\sa
\note
\warning
\par
\code
Set DHCP Server (AP mode) parameters example:
SlNetAppDhcpServerBasicOpt_t dhcpParams;
uint8_t outLen = sizeof(SlNetAppDhcpServerBasicOpt_t);
dhcpParams.lease_time = 4096; // lease time (in seconds) of the IP Address
dhcpParams.ipv4_addr_start = SL_IPV4_VAL(192,168,1,10); // first IP Address for allocation. IP Address should be set as Hex number - i.e. 0A0B0C01 for (10.11.12.1)
dhcpParams.ipv4_addr_last = SL_IPV4_VAL(192,168,1,16); // last IP Address for allocation. IP Address should be set as Hex number - i.e. 0A0B0C01 for (10.11.12.1)
sl_NetAppStop(SL_NET_APP_DHCP_SERVER_ID); // Stop DHCP server before settings
sl_NetAppSet(SL_NET_APP_DHCP_SERVER_ID, NETAPP_SET_DHCP_SRV_BASIC_OPT, outLen, (uint8_t* )&dhcpParams); // set parameters
sl_NetAppStart(SL_NET_APP_DHCP_SERVER_ID); // Start DHCP server with new settings
\endcode
\code
Set Device URN name example:
Device name, maximum length of 33 characters
Device name affects URN name, own SSID name in AP mode, and WPS file "device name" in WPS I.E (STA-WPS / P2P)
In case no device URN name set, the default name is "mysimplelink"
Allowed characters in device name are: 'a - z' , 'A - Z' , '0-9' and '-'
uint8_t *my_device = "MY-SIMPLELINK-DEV";
sl_NetAppSet (SL_NET_APP_DEVICE_CONFIG_ID, NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN, strlen(my_device), (uint8_t *) my_device);
\endcode
*/
#if _SL_INCLUDE_FUNC(sl_NetAppSet)
int32_t sl_NetAppSet(const uint8_t AppId, const uint8_t Option, const uint8_t OptionLen, const uint8_t *pOptionValue);
#endif
/*!
\brief Internal function for getting network applications configurations
\return On success, zero is returned. On error, -1 is
returned
\param[in] AppId Application id, could be one of the following: \n
- SL_NET_APP_HTTP_SERVER_ID
- SL_NET_APP_DHCP_SERVER_ID
- SL_NET_APP_MDNS_ID
- SL_NET_APP_DEVICE_CONFIG_ID
\param[in] SetOptions set option, could be one of the following: \n
- SL_NET_APP_DHCP_SERVER_ID
- NETAPP_SET_DHCP_SRV_BASIC_OPT
- SL_NET_APP_HTTP_SERVER_ID
- NETAPP_SET_GET_HTTP_OPT_PORT_NUMBER
- NETAPP_SET_GET_HTTP_OPT_AUTH_CHECK
- NETAPP_SET_GET_HTTP_OPT_AUTH_NAME
- NETAPP_SET_GET_HTTP_OPT_AUTH_PASSWORD
- NETAPP_SET_GET_HTTP_OPT_AUTH_REALM
- NETAPP_SET_GET_HTTP_OPT_ROM_PAGES_ACCESS
- SL_NET_APP_MDNS_ID
- NETAPP_SET_GET_MDNS_CONT_QUERY_OPT
- NETAPP_SET_GET_MDNS_QEVETN_MASK_OPT
- NETAPP_SET_GET_MDNS_TIMING_PARAMS_OPT
- SL_NET_APP_DEVICE_CONFIG_ID
- NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN
- NETAPP_SET_GET_DEV_CONF_OPT_DOMAIN_NAME
\param[in] OptionLen The length of the allocated memory as input, when the
function complete, the value of this parameter would be
the len that actually read from the device.
If the device return length that is longer from the input
value, the function will cut the end of the returned structure
and will return ESMALLBUF
\param[out] pValues pointer to the option structure which will be filled with the response from the device
\sa
\note
\warning
\par
\code
Get DHCP Server parameters example:
SlNetAppDhcpServerBasicOpt_t dhcpParams;
uint8_t outLen = sizeof(SlNetAppDhcpServerBasicOpt_t);
sl_NetAppGet(SL_NET_APP_DHCP_SERVER_ID, NETAPP_SET_DHCP_SRV_BASIC_OPT, &outLen, (uint8_t* )&dhcpParams);
printf("DHCP Start IP %d.%d.%d.%d End IP %d.%d.%d.%d Lease time seconds %d\n",
SL_IPV4_BYTE(dhcpParams.ipv4_addr_start,3),SL_IPV4_BYTE(dhcpParams.ipv4_addr_start,2),
SL_IPV4_BYTE(dhcpParams.ipv4_addr_start,1),SL_IPV4_BYTE(dhcpParams.ipv4_addr_start,0),
SL_IPV4_BYTE(dhcpParams.ipv4_addr_last,3),SL_IPV4_BYTE(dhcpParams.ipv4_addr_last,2),
SL_IPV4_BYTE(dhcpParams.ipv4_addr_last,1),SL_IPV4_BYTE(dhcpParams.ipv4_addr_last,0),
dhcpParams.lease_time);
\endcode
\code
Get Device URN name example:
Maximum length of 33 characters of device name.
Device name affects URN name, own SSID name in AP mode, and WPS file "device name" in WPS I.E (STA-WPS / P2P)
in case no device URN name set, the default name is "mysimplelink"
uint8_t my_device_name[35];
sl_NetAppGet (SL_NET_APP_DEVICE_CONFIG_ID, NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN, strlen(my_device_name), (uint8_t *)my_device_name);
\endcode
*/
#if _SL_INCLUDE_FUNC(sl_NetAppGet)
int32_t sl_NetAppGet(const uint8_t AppId, const uint8_t Option,uint8_t *pOptionLen, uint8_t *pOptionValue);
#endif
private:
cc3100_driver &_driver;
cc3100_nonos &_nonos;
};//class
/*****************************************************************************/
/* Macro declarations */
/*****************************************************************************/
const uint8_t FLOW_CONT_MIN = 1;
class cc3100_flowcont
{
public:
cc3100_flowcont(cc3100_driver &driver, cc3100_nonos &nonos);
~cc3100_flowcont();
#if 0
/*****************************************************************************/
/* Function prototypes */
/*****************************************************************************/
void _SlDrvFlowContInit(void);
void _SlDrvFlowContDeinit(void);
#endif
private:
cc3100_driver &_driver;
cc3100_nonos &_nonos;
};//class
}//namespace mbed_cc3100
/*!
Close the Doxygen group.
@}
*/
#endif /* __NETAPP_H__ */
Repository toolbox
| Export to desktop IDE |
| Build repository |
Repository details
| Type: | Program |
|---|---|
| Mbed OS support: | Mbed 2 deprecated |
| Created: | 26 May 2017 |
| Imports: | 0 |
| Forks: | 0 |
| Commits: | 10 |
| Dependents: | 0 |
| Dependencies: | 3 |
| Followers: | 2 |
