Arturo Pesaro
cc3100_Socket_Wifi_Server with Ethernet Interface not working
Dependencies: EthernetInterface mbed-rtos mbed
Fork of
cc3100_Test_Demo
by 
David Fletcher
Diff: simplelink/cc3100_wlan.h
- Revision:
- 6:778b081f6a13
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/simplelink/cc3100_wlan.h Thu Mar 19 15:39:08 2015 +0000
@@ -0,0 +1,1308 @@
+/*
+ * wlan.h - CC31xx/CC32xx Host Driver Implementation
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ *
+ * Neither the name of Texas Instruments Incorporated nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+*/
+
+/*****************************************************************************/
+/* Include files */
+/*****************************************************************************/
+#include "cc3100_simplelink.h"
+
+#ifndef WLAN_H_
+#define WLAN_H_
+
+namespace mbed_cc3100 {
+
+/*****************************************************************************/
+/* Macro declarations */
+/*****************************************************************************/
+
+/*!
+
+ \addtogroup wlan
+ @{
+
+*/
+
+const uint8_t SL_BSSID_LENGTH = (6);
+const uint8_t MAXIMAL_SSID_LENGTH = (32);
+
+const uint8_t NUM_OF_RATE_INDEXES = (20);
+const uint8_t SIZE_OF_RSSI_HISTOGRAM = (6);
+
+/* WLAN Disconnect Reason Codes */
+const uint8_t SL_DISCONNECT_RESERVED_0 = (0);
+const uint8_t SL_DISCONNECT_UNSPECIFIED_REASON = (1);
+const uint8_t SL_PREVIOUS_AUTHENTICATION_NO_LONGER_VALID = (2);
+const uint8_t SL_DEAUTHENTICATED_BECAUSE_SENDING_STATION_IS_LEAVING = (3);
+const uint8_t SL_DISASSOCIATED_DUE_TO_INACTIVITY = (4);
+const uint8_t SL_DISASSOCIATED_BECAUSE_AP_IS_UNABLE_TO_HANDLE_ALL_CURRENTLY_ASSOCIATED_STATIONS = (5);
+const uint8_t SL_CLASS_2_FRAME_RECEIVED_FROM_NONAUTHENTICATED_STATION = (6);
+const uint8_t SL_CLASS_3_FRAME_RECEIVED_FROM_NONASSOCIATED_STATION = (7);
+const uint8_t SL_DISASSOCIATED_BECAUSE_SENDING_STATION_IS_LEAVING_BSS = (8);
+const uint8_t SL_STATION_REQUESTING_ASSOCIATION_IS_NOT_AUTHENTICATED_WITH_RESPONDING_STATION = (9);
+const uint8_t SL_DISASSOCIATED_BECAUSE_THE_INFORMATION_IN_THE_POWER_CAPABILITY_ELEMENT_IS_UNACCEPTABLE = (10);
+const uint8_t SL_DISASSOCIATED_BECAUSE_THE_INFORMATION_IN_THE_SUPPORTED_CHANNELS_ELEMENT_IS_UNACCEPTABLE = (11);
+const uint8_t SL_DISCONNECT_RESERVED_1 = (12);
+const uint8_t SL_INVALID_INFORMATION_ELEMENT = (13);
+const uint8_t SL_MESSAGE_INTEGRITY_CODE_MIC_FAILURE = (14);
+const uint8_t SL_FOUR_WAY_HANDSHAKE_TIMEOUT = (15);
+const uint8_t SL_GROUP_KEY_HANDSHAKE_TIMEOUT = (16);
+const uint8_t SL_RE_ASSOCIATION_REQUEST_PROBE_RESPONSE_BEACON_FRAME = (17);
+const uint8_t SL_INVALID_GROUP_CIPHER = (18);
+const uint8_t SL_INVALID_PAIRWISE_CIPHER = (19);
+const uint8_t SL_INVALID_AKMP = (20);
+const uint8_t SL_UNSUPPORTED_RSN_INFORMATION_ELEMENT_VERSION = (21);
+const uint8_t SL_INVALID_RSN_INFORMATION_ELEMENT_CAPABILITIES = (22);
+const uint8_t SL_IEEE_802_1X_AUTHENTICATION_FAILED = (23);
+const uint8_t SL_CIPHER_SUITE_REJECTED_BECAUSE_OF_THE_SECURITY_POLICY = (24);
+const uint8_t SL_DISCONNECT_RESERVED_2 = (25);
+const uint8_t SL_DISCONNECT_RESERVED_3 = (26);
+const uint8_t SL_DISCONNECT_RESERVED_4 = (27);
+const uint8_t SL_DISCONNECT_RESERVED_5 = (28);
+const uint8_t SL_DISCONNECT_RESERVED_6 = (29);
+const uint8_t SL_DISCONNECT_RESERVED_7 = (30);
+const uint8_t SL_DISCONNECT_RESERVED_8 = (31);
+const uint8_t SL_USER_INITIATED_DISCONNECTION = (200);
+
+/* Wlan error codes */
+const int8_t SL_ERROR_KEY_ERROR = (-3);
+const int8_t SL_ERROR_INVALID_ROLE = (-71);
+const int8_t SL_ERROR_INVALID_SECURITY_TYPE = (-84);
+const int8_t SL_ERROR_PASSPHRASE_TOO_LONG = (-85);
+const int8_t SL_ERROR_WPS_NO_PIN_OR_WRONG_PIN_LEN = (-87);
+const int8_t SL_ERROR_EAP_WRONG_METHOD = (-88);
+const int8_t SL_ERROR_PASSWORD_ERROR = (-89);
+const int8_t SL_ERROR_EAP_ANONYMOUS_LEN_ERROR = (-90);
+const int8_t SL_ERROR_SSID_LEN_ERROR = (-91);
+const int8_t SL_ERROR_USER_ID_LEN_ERROR = (-92);
+const int8_t SL_ERROR_ILLEGAL_WEP_KEY_INDEX = (-95);
+const int8_t SL_ERROR_INVALID_DWELL_TIME_VALUES = (-96);
+const int8_t SL_ERROR_INVALID_POLICY_TYPE = (-97);
+const int8_t SL_ERROR_PM_POLICY_INVALID_OPTION = (-98);
+const int8_t SL_ERROR_PM_POLICY_INVALID_PARAMS = (-99);
+const int16_t SL_ERROR_WIFI_ALREADY_DISCONNECTED = (-129);
+const int8_t SL_ERROR_WIFI_NOT_CONNECTED = (-59);
+
+
+
+const uint8_t SL_SEC_TYPE_OPEN = (0);
+const uint8_t SL_SEC_TYPE_WEP = (1);
+const uint8_t SL_SEC_TYPE_WPA = (2); /* deprecated */
+const uint8_t SL_SEC_TYPE_WPA_WPA2 = (2);
+const uint8_t SL_SEC_TYPE_WPS_PBC = (3);
+const uint8_t SL_SEC_TYPE_WPS_PIN = (4);
+const uint8_t SL_SEC_TYPE_WPA_ENT = (5);
+const uint8_t SL_SEC_TYPE_P2P_PBC = (6);
+const uint8_t SL_SEC_TYPE_P2P_PIN_KEYPAD = (7);
+const uint8_t SL_SEC_TYPE_P2P_PIN_DISPLAY = (8);
+const uint8_t SL_SEC_TYPE_P2P_PIN_AUTO = (9); /* NOT Supported yet */
+
+
+
+const uint8_t SL_SCAN_SEC_TYPE_OPEN = (0);
+const uint8_t SL_SCAN_SEC_TYPE_WEP = (1);
+const uint8_t SL_SCAN_SEC_TYPE_WPA = (2);
+const uint8_t SL_SCAN_SEC_TYPE_WPA2 = (3);
+
+
+
+const uint8_t TLS = (0x1);
+const uint8_t MSCHAP = (0x0);
+const uint8_t PSK = (0x2);
+const uint8_t TTLS = (0x10);
+const uint8_t PEAP0 = (0x20);
+const uint8_t PEAP1 = (0x40);
+const uint8_t FAST = (0x80);
+
+const uint8_t FAST_AUTH_PROVISIONING = (0x02);
+const uint8_t FAST_UNAUTH_PROVISIONING = (0x01);
+const uint8_t FAST_NO_PROVISIONING = (0x00);
+
+const uint8_t EAPMETHOD_PHASE2_SHIFT = (8);
+const uint8_t EAPMETHOD_PAIRWISE_CIPHER_SHIFT = (19);
+const uint8_t EAPMETHOD_GROUP_CIPHER_SHIFT = (27);
+
+const uint8_t WPA_CIPHER_CCMP = (0x1);
+const uint8_t WPA_CIPHER_TKIP = (0x2);
+const uint8_t CC31XX_DEFAULT_CIPHER = (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP);
+
+#define EAPMETHOD(phase1,phase2,pairwise_cipher,group_cipher) \
+((phase1) | \
+ ((phase2) << EAPMETHOD_PHASE2_SHIFT ) |\
+ ((uint32_t)(pairwise_cipher) << EAPMETHOD_PAIRWISE_CIPHER_SHIFT ) |\
+ ((uint32_t)(group_cipher) << EAPMETHOD_GROUP_CIPHER_SHIFT ))
+
+/* phase1 phase2 pairwise_cipher group_cipher */
+#define SL_ENT_EAP_METHOD_TLS EAPMETHOD(TLS , 0 , CC31XX_DEFAULT_CIPHER , CC31XX_DEFAULT_CIPHER)
+#define SL_ENT_EAP_METHOD_TTLS_TLS EAPMETHOD(TTLS , TLS , CC31XX_DEFAULT_CIPHER , CC31XX_DEFAULT_CIPHER)
+#define SL_ENT_EAP_METHOD_TTLS_MSCHAPv2 EAPMETHOD(TTLS , MSCHAP , CC31XX_DEFAULT_CIPHER , CC31XX_DEFAULT_CIPHER)
+#define SL_ENT_EAP_METHOD_TTLS_PSK EAPMETHOD(TTLS , PSK , CC31XX_DEFAULT_CIPHER , CC31XX_DEFAULT_CIPHER)
+#define SL_ENT_EAP_METHOD_PEAP0_TLS EAPMETHOD(PEAP0 , TLS , CC31XX_DEFAULT_CIPHER , CC31XX_DEFAULT_CIPHER)
+#define SL_ENT_EAP_METHOD_PEAP0_MSCHAPv2 EAPMETHOD(PEAP0 , MSCHAP , CC31XX_DEFAULT_CIPHER , CC31XX_DEFAULT_CIPHER)
+#define SL_ENT_EAP_METHOD_PEAP0_PSK EAPMETHOD(PEAP0 , PSK , CC31XX_DEFAULT_CIPHER , CC31XX_DEFAULT_CIPHER)
+#define SL_ENT_EAP_METHOD_PEAP1_TLS EAPMETHOD(PEAP1 , TLS , CC31XX_DEFAULT_CIPHER , CC31XX_DEFAULT_CIPHER)
+#define SL_ENT_EAP_METHOD_PEAP1_MSCHAPv2 EAPMETHOD(PEAP1 , MSCHAP , CC31XX_DEFAULT_CIPHER , CC31XX_DEFAULT_CIPHER)
+#define SL_ENT_EAP_METHOD_PEAP1_PSK EAPMETHOD(PEAP1 , PSK , CC31XX_DEFAULT_CIPHER , CC31XX_DEFAULT_CIPHER)
+#define SL_ENT_EAP_METHOD_FAST_AUTH_PROVISIONING EAPMETHOD(FAST , FAST_AUTH_PROVISIONING , CC31XX_DEFAULT_CIPHER , CC31XX_DEFAULT_CIPHER)
+#define SL_ENT_EAP_METHOD_FAST_UNAUTH_PROVISIONING EAPMETHOD(FAST , FAST_UNAUTH_PROVISIONING , CC31XX_DEFAULT_CIPHER , CC31XX_DEFAULT_CIPHER)
+#define SL_ENT_EAP_METHOD_FAST_NO_PROVISIONING EAPMETHOD(FAST , FAST_NO_PROVISIONING , CC31XX_DEFAULT_CIPHER , CC31XX_DEFAULT_CIPHER)
+
+const uint8_t SL_LONG_PREAMBLE = (0);
+const uint8_t SL_SHORT_PREAMBLE = (1);
+
+const uint8_t SL_RAW_RF_TX_PARAMS_CHANNEL_SHIFT = (0);
+const uint8_t SL_RAW_RF_TX_PARAMS_RATE_SHIFT = (6);
+const uint8_t SL_RAW_RF_TX_PARAMS_POWER_SHIFT = (11);
+const uint8_t SL_RAW_RF_TX_PARAMS_PREAMBLE_SHIFT = (15);
+
+#define SL_RAW_RF_TX_PARAMS(chan,rate,power,preamble) \
+ ((chan << SL_RAW_RF_TX_PARAMS_CHANNEL_SHIFT) | \
+ (rate << SL_RAW_RF_TX_PARAMS_RATE_SHIFT) | \
+ (power << SL_RAW_RF_TX_PARAMS_POWER_SHIFT) | \
+ (preamble << SL_RAW_RF_TX_PARAMS_PREAMBLE_SHIFT))
+
+
+/* wlan config application IDs */
+const uint8_t SL_WLAN_CFG_AP_ID = (0);
+const uint8_t SL_WLAN_CFG_GENERAL_PARAM_ID = (1);
+const uint8_t SL_WLAN_CFG_P2P_PARAM_ID = (2);
+
+/* wlan AP Config set/get options */
+const uint8_t WLAN_AP_OPT_SSID = (0);
+const uint8_t WLAN_AP_OPT_CHANNEL = (3);
+const uint8_t WLAN_AP_OPT_HIDDEN_SSID = (4);
+const uint8_t WLAN_AP_OPT_SECURITY_TYPE = (6);
+const uint8_t WLAN_AP_OPT_PASSWORD = (7);
+const uint8_t WLAN_GENERAL_PARAM_OPT_COUNTRY_CODE = (9);
+const uint8_t WLAN_GENERAL_PARAM_OPT_STA_TX_POWER = (10);
+const uint8_t WLAN_GENERAL_PARAM_OPT_AP_TX_POWER = (11);
+
+const uint8_t WLAN_P2P_OPT_DEV_NAME = (12);
+const uint8_t WLAN_P2P_OPT_DEV_TYPE = (13);
+const uint8_t WLAN_P2P_OPT_CHANNEL_N_REGS = (14);
+const uint8_t WLAN_GENERAL_PARAM_OPT_INFO_ELEMENT = (16);
+const uint8_t WLAN_GENERAL_PARAM_OPT_SCAN_PARAMS = (18); /* change the scan channels and RSSI threshold using this configuration option */
+
+/* SmartConfig CIPHER options */
+const uint8_t SMART_CONFIG_CIPHER_SFLASH = (0); /* password is not delivered by the application. The Simple Manager should */
+/* check if the keys are stored in the Flash. */
+const uint8_t SMART_CONFIG_CIPHER_AES = (1); /* AES (other types are not supported) */
+const uint8_t SMART_CONFIG_CIPHER_NONE = (0xFF); /* do not check in the flash */
+
+
+const uint8_t SL_POLICY_CONNECTION = (0x10);
+const uint8_t SL_POLICY_SCAN = (0x20);
+const uint8_t SL_POLICY_PM = (0x30);
+const uint8_t SL_POLICY_P2P = (0x40);
+
+#define VAL_2_MASK(position,value) ((1 & (value))<<(position))
+#define MASK_2_VAL(position,mask) (((1 << position) & (mask)) >> (position))
+
+#define SL_CONNECTION_POLICY(Auto,Fast,Open,anyP2P,autoSmartConfig) (VAL_2_MASK(0,Auto) | VAL_2_MASK(1,Fast) | VAL_2_MASK(2,Open) | VAL_2_MASK(3,anyP2P) | VAL_2_MASK(4,autoSmartConfig))
+#define SL_SCAN_POLICY_EN(policy) (MASK_2_VAL(0,policy))
+#define SL_SCAN_POLICY(Enable) (VAL_2_MASK(0,Enable))
+
+
+const uint8_t SL_NORMAL_POLICY = (0);
+const uint8_t SL_LOW_LATENCY_POLICY = (1);
+const uint8_t SL_LOW_POWER_POLICY = (2);
+const uint8_t SL_ALWAYS_ON_POLICY = (3);
+const uint8_t SL_LONG_SLEEP_INTERVAL_POLICY = (4);
+
+const uint8_t SL_P2P_ROLE_NEGOTIATE = (3);
+const uint8_t SL_P2P_ROLE_GROUP_OWNER = (15);
+const uint8_t SL_P2P_ROLE_CLIENT = (0);
+
+const uint8_t SL_P2P_NEG_INITIATOR_ACTIVE = (0);
+const uint8_t SL_P2P_NEG_INITIATOR_PASSIVE = (1);
+const uint8_t SL_P2P_NEG_INITIATOR_RAND_BACKOFF = (2);
+
+#define POLICY_VAL_2_OPTIONS(position,mask,policy) ((mask & policy) << position )
+
+#define SL_P2P_POLICY(p2pNegType,p2pNegInitiator) (POLICY_VAL_2_OPTIONS(0,0xF,(p2pNegType > SL_P2P_ROLE_GROUP_OWNER ? SL_P2P_ROLE_GROUP_OWNER : p2pNegType)) | \
+ POLICY_VAL_2_OPTIONS(4,0x1,(p2pNegType > SL_P2P_ROLE_GROUP_OWNER ? 1:0)) | \
+ POLICY_VAL_2_OPTIONS(5,0x3, p2pNegInitiator))
+
+
+/* Info elements */
+
+const uint8_t INFO_ELEMENT_DEFAULT_ID = (0); /* 221 will be used */
+
+/* info element size is up to 252 bytes (+ 3 bytes of OUI). */
+const uint8_t INFO_ELEMENT_MAX_SIZE = (252);
+
+/* For AP - the total length of all info elements is 300 bytes (for example - 4 info elements of 75 bytes each) */
+const uint16_t INFO_ELEMENT_MAX_TOTAL_LENGTH_AP = (300);
+/* For P2P - the total length of all info elements is 150 bytes (for example - 4 info elements of 40 bytes each) */
+const uint8_t INFO_ELEMENT_MAX_TOTAL_LENGTH_P2P_GO (160);
+
+const uint8_t INFO_ELEMENT_AP_ROLE = (0);
+const uint8_t INFO_ELEMENT_P2P_GO_ROLE = (1);
+
+/* we support up to 4 info elements per Role. */
+const uint8_t MAX_PRIVATE_INFO_ELEMENTS_SUPPROTED = (4);
+
+const uint8_t INFO_ELEMENT_DEFAULT_OUI_0 = (0x08);
+const uint8_t INFO_ELEMENT_DEFAULT_OUI_1 = (0x00);
+const uint8_t INFO_ELEMENT_DEFAULT_OUI_2 = (0x28);
+
+const uint32_t INFO_ELEMENT_DEFAULT_OUI = (0x000000); /* 08, 00, 28 will be used */
+
+
+/*****************************************************************************/
+/* Structure/Enum declarations */
+/*****************************************************************************/
+
+typedef enum {
+ RATE_1M = 1,
+ RATE_2M = 2,
+ RATE_5_5M = 3,
+ RATE_11M = 4,
+ RATE_6M = 6,
+ RATE_9M = 7,
+ RATE_12M = 8,
+ RATE_18M = 9,
+ RATE_24M = 10,
+ RATE_36M = 11,
+ RATE_48M = 12,
+ RATE_54M = 13,
+ RATE_MCS_0 = 14,
+ RATE_MCS_1 = 15,
+ RATE_MCS_2 = 16,
+ RATE_MCS_3 = 17,
+ RATE_MCS_4 = 18,
+ RATE_MCS_5 = 19,
+ RATE_MCS_6 = 20,
+ RATE_MCS_7 = 21,
+ MAX_NUM_RATES = 0xFF
+} SlRateIndex_e;
+
+typedef enum {
+ DEV_PW_DEFAULT=0,
+ DEV_PW_PIN_KEYPAD=1,
+ DEV_PW_PUSH_BUTTON=4,
+ DEV_PW_PIN_DISPLAY=5
+} sl_p2p_dev_password_method;
+
+
+typedef struct {
+ uint32_t status;
+ uint32_t ssid_len;
+ uint8_t ssid[32];
+ uint32_t private_token_len;
+ uint8_t private_token[32];
+} slSmartConfigStartAsyncResponse_t;
+
+typedef struct {
+ uint16_t status;
+ uint16_t padding;
+} slSmartConfigStopAsyncResponse_t;
+
+typedef struct {
+ uint16_t status;
+ uint16_t padding;
+} slWlanConnFailureAsyncResponse_t;
+
+typedef struct {
+ uint8_t connection_type;/* 0-STA,3-P2P_CL */
+ uint8_t ssid_len;
+ uint8_t ssid_name[32];
+ uint8_t go_peer_device_name_len;
+ uint8_t go_peer_device_name[32];
+ uint8_t bssid[6];
+ uint8_t reason_code;
+ uint8_t padding[2];
+} slWlanConnectAsyncResponse_t;
+
+typedef struct {
+ uint8_t go_peer_device_name[32];
+ uint8_t mac[6];
+ uint8_t go_peer_device_name_len;
+ uint8_t wps_dev_password_id;
+ uint8_t own_ssid[32];/* relevant for event sta-connected only */
+ uint8_t own_ssid_len;/* relevant for event sta-connected only */
+ uint8_t padding[3];
+} slPeerInfoAsyncResponse_t;
+
+
+typedef union {
+ slSmartConfigStartAsyncResponse_t smartConfigStartResponse; /*SL_WLAN_SMART_CONFIG_COMPLETE_EVENT*/
+ slSmartConfigStopAsyncResponse_t smartConfigStopResponse; /*SL_WLAN_SMART_CONFIG_STOP_EVENT */
+ slPeerInfoAsyncResponse_t APModeStaConnected; /* SL_WLAN_STA_CONNECTED_EVENT - relevant only in AP mode - holds information regarding a new STA connection */
+ slPeerInfoAsyncResponse_t APModestaDisconnected; /* SL_WLAN_STA_DISCONNECTED_EVENT - relevant only in AP mode - holds information regarding a STA disconnection */
+ slWlanConnectAsyncResponse_t STAandP2PModeWlanConnected; /* SL_WLAN_CONNECT_EVENT - relevant only in STA and P2P mode - holds information regarding a new connection */
+ slWlanConnectAsyncResponse_t STAandP2PModeDisconnected; /* SL_WLAN_DISCONNECT_EVENT - relevant only in STA and P2P mode - holds information regarding a disconnection */
+ slPeerInfoAsyncResponse_t P2PModeDevFound; /* SL_WLAN_P2P_DEV_FOUND_EVENT - relevant only in P2P mode */
+ slPeerInfoAsyncResponse_t P2PModeNegReqReceived; /* SL_WLAN_P2P_NEG_REQ_RECEIVED_EVENT - relevant only in P2P mode */
+ slWlanConnFailureAsyncResponse_t P2PModewlanConnectionFailure; /* SL_WLAN_CONNECTION_FAILED_EVENT - relevant only in P2P mode */
+
+} SlWlanEventData_u;
+
+typedef struct {
+ uint32_t Event;
+ SlWlanEventData_u EventData;
+} SlWlanEvent_t;
+
+
+typedef struct {
+ uint32_t ReceivedValidPacketsNumber; /* sum of the packets that been received OK (include filtered) */
+ uint32_t ReceivedFcsErrorPacketsNumber; /* sum of the packets that been dropped due to FCS error */
+ uint32_t ReceivedAddressMismatchPacketsNumber; /* sum of the packets that been received but filtered out by one of the HW filters */
+ int16_t AvarageDataCtrlRssi; /* average RSSI for all valid data packets received */
+ int16_t AvarageMgMntRssi; /* average RSSI for all valid management packets received */
+ uint16_t RateHistogram[NUM_OF_RATE_INDEXES]; /* rate histogram for all valid packets received */
+ uint16_t RssiHistogram[SIZE_OF_RSSI_HISTOGRAM]; /* RSSI histogram from -40 until -87 (all below and above\n RSSI will appear in the first and last cells */
+ uint32_t StartTimeStamp; /* the time stamp started collecting the statistics in uSec */
+ uint32_t GetTimeStamp; /* the time stamp called the get statistics command */
+} SlGetRxStatResponse_t;
+
+
+typedef struct {
+ uint8_t ssid[MAXIMAL_SSID_LENGTH];
+ uint8_t ssid_len;
+ uint8_t sec_type;
+ uint8_t bssid[SL_BSSID_LENGTH];
+ int8_t rssi;
+ int8_t reserved[3];
+} Sl_WlanNetworkEntry_t;
+
+
+typedef struct {
+ uint8_t Type;
+ int8_t* Key;
+ uint8_t KeyLen;
+} SlSecParams_t;
+
+typedef struct {
+ int8_t* User;
+ uint8_t UserLen;
+ int8_t* AnonUser;
+ uint8_t AnonUserLen;
+ uint8_t CertIndex; /* not supported */
+ uint32_t EapMethod;
+} SlSecParamsExt_t;
+
+typedef struct {
+ int8_t User[32];
+ uint8_t UserLen;
+ int8_t AnonUser[32];
+ uint8_t AnonUserLen;
+ uint8_t CertIndex; //not supported
+ uint32_t EapMethod;
+} SlGetSecParamsExt_t;
+
+typedef enum {
+ ROLE_STA = 0,
+ ROLE_AP = 2,
+ ROLE_P2P = 3,
+ ROLE_STA_ERR = -1, /* Failure to load MAC/PHY in STA role */
+ ROLE_AP_ERR = -ROLE_AP, /* Failure to load MAC/PHY in AP role */
+ ROLE_P2P_ERR = -ROLE_P2P /* Failure to load MAC/PHY in P2P role */
+} SlWlanMode_t;
+
+typedef struct {
+ uint32_t G_Channels_mask;
+ int32_t rssiThershold;
+} slWlanScanParamCommand_t;
+
+
+typedef struct {
+ uint8_t id;
+ uint8_t oui[3];
+ uint16_t length;
+ uint8_t data[252];
+} sl_protocol_InfoElement_t;
+
+typedef struct {
+ uint8_t index; /* 0 - MAX_PRIVATE_INFO_ELEMENTS_SUPPROTED */
+ uint8_t role; /* bit0: AP = 0, GO = 1 */
+ sl_protocol_InfoElement_t ie;
+} sl_protocol_WlanSetInfoElement_t;
+
+
+class cc3100_wlan_rx_filters;
+class cc3100_wlan
+{
+
+public:
+
+ cc3100_wlan(cc3100_driver &driver, cc3100_wlan_rx_filters &wlan_rx_filters);
+
+ ~cc3100_wlan();
+
+
+ /*****************************************************************************/
+ /* Function prototypes */
+ /*****************************************************************************/
+
+
+ /*!
+ \brief Connect to wlan network as a station
+
+ \param[in] pName up to 32 bytes in case of STA the name is the SSID of the Access Point
+ \param[in] NameLen name length
+ \param[in] pMacAddr 6 bytes for MAC address
+ \param[in] pSecParams Security parameters (use NULL key for SL_SEC_TYPE_OPEN)
+ Security types options: \n
+ - SL_SEC_TYPE_OPEN
+ - SL_SEC_TYPE_WEP
+ - SL_SEC_TYPE_WPA_WPA2
+ - SL_SEC_TYPE_WPA_ENT
+ - SL_SEC_TYPE_WPS_PBC
+ - SL_SEC_TYPE_WPS_PIN
+ \param[in] pSecExtParams Enterprise parameters (set NULL in case Enterprise parameters is not in use)
+
+ \return On success, zero is returned. On error, negative is returned
+ In case error number (-71) is returned, it indicates a connection was activated while the device it running in AP role
+
+ \sa sl_WlanDisconnect
+ \note belongs to \ref ext_api
+ \warning In this version only single enterprise mode could be used
+ SL_SEC_TYPE_WPA is a deprecated definition, the new definition is SL_SEC_TYPE_WPA_WPA2
+ */
+#if _SL_INCLUDE_FUNC(sl_WlanConnect)
+ int16_t sl_WlanConnect(const signed char* pName, const int16_t NameLen, const uint8_t *pMacAddr, const SlSecParams_t* pSecParams, const SlSecParamsExt_t* pSecExtParams);
+#endif
+
+ /*!
+ \brief wlan disconnect
+
+ Disconnect connection
+
+ \return 0 disconnected done, other already disconnected
+
+ \sa sl_WlanConnect
+ \note belongs to \ref ext_api
+ \warning
+ */
+#if _SL_INCLUDE_FUNC(sl_WlanDisconnect)
+ int16_t sl_WlanDisconnect(void);
+#endif
+
+ /*!
+ \brief add profile
+
+ When auto start is enabled, the device connects to a
+ station from the profiles table. Up to 7 profiles are
+ supported. If several profiles configured the device chose
+ the highest priority profile, within each priority group,
+ device will chose profile based on security policy, signal
+ strength, etc parameters.
+
+
+ \param[in] pName up to 32 bytes in case of STA the name is the
+ SSID of the Access Point
+ in case of P2P the name is the remote device name
+ \param[in] NameLen name length
+ \param[in] pMacAddr 6 bytes for MAC address
+ \param[in] pSecParams Security parameters - security type
+ (SL_SEC_TYPE_OPEN,SL_SEC_TYPE_WEP,SL_SEC_TYPE_WPA_WPA2,
+ SL_SEC_TYPE_P2P_PBC,SL_SEC_TYPE_P2P_PIN_KEYPAD,SL_SEC_TYPE_P2P_PIN_DISPLAY, SL_SEC_TYPE_WPA_ENT), key, and key length
+ in case of p2p security type pin the key refers to pin code
+ \param[in] pSecExtParams Enterprise parameters - identity, identity length,
+ Anonymous, Anonymous length, CertIndex (not supported,
+ certificates need to be placed in a specific file ID),
+ EapMethod.Use NULL in case Enterprise parameters is not in use
+
+ \param[in] Priority profile priority. Lowest priority: 0
+ \param[in] Options Not supported
+
+ \return On success, profile stored index is returned. On error, negative value is returned
+
+ \sa sl_WlanProfileGet , sl_WlanProfileDel
+ \note belongs to \ref ext_api
+ \warning Only one Enterprise profile is supported.
+ Please Note that in case of adding an existing profile (compared by pName,pMACAddr and security type)
+ the old profile will be deleted and the same index will be returned.
+ SL_SEC_TYPE_WPA is a deprecated definition, the new definition is SL_SEC_TYPE_WPA_WPA2
+
+ */
+#if _SL_INCLUDE_FUNC(sl_WlanProfileAdd)
+ int16_t sl_WlanProfileAdd(const int8_t* pName,
+ const int16_t NameLen,
+ const uint8_t *pMacAddr,
+ const SlSecParams_t* pSecParams ,
+ const SlSecParamsExt_t* pSecExtParams,
+ const uint32_t Priority,
+ const uint32_t Options);
+#endif
+
+ /*!
+ \brief get profile
+
+ read profile from the device
+
+ \param[in] Index profile stored index, if index does not exists
+ error is return
+ \param[out] pName up to 32 bytes, in case of sta mode the name of the Access Point
+ in case of p2p mode the name of the Remote Device
+ \param[out] pNameLen name length
+ \param[out] pMacAddr 6 bytes for MAC address
+ \param[out] pSecParams security parameters - security type
+ (SL_SEC_TYPE_OPEN, SL_SEC_TYPE_WEP, SL_SEC_TYPE_WPA_WPA2 or
+ SL_SEC_TYPE_WPS_PBC, SL_SEC_TYPE_WPS_PIN, SL_SEC_TYPE_WPA_ENT,SL_SEC_TYPE_P2P_PBC,SL_SEC_TYPE_P2P_PIN_KEYPAD or SL_SEC_TYPE_P2P_PIN_DISPLAY),
+ key and key length are not
+ in case of p2p security type pin the key refers to pin code
+ return due to security reasons.
+ \param[out] pSecExtParams enterprise parameters - identity, identity
+ length, Anonymous, Anonymous length
+ CertIndex (not supported), EapMethod.
+ \param[out] Priority profile priority
+
+ \return On success, Profile security type is returned (0 or positive number). On error, -1 is
+ returned
+
+ \sa sl_WlanProfileAdd , sl_WlanProfileDel
+ \note belongs to \ref ext_api
+ \warning
+ */
+#if _SL_INCLUDE_FUNC(sl_WlanProfileGet)
+ int16_t sl_WlanProfileGet(const int16_t Index,int8_t* pName, int16_t *pNameLen, uint8_t *pMacAddr, SlSecParams_t* pSecParams, SlGetSecParamsExt_t* pSecExtParams, uint32_t *pPriority);
+#endif
+
+ /*!
+ \brief Delete WLAN profile
+
+ Delete WLAN profile
+
+ \param[in] index number of profile to delete.Possible values are 0 to 6.
+ Index value 255 will delete all saved profiles
+
+ \return On success, zero is returned. On error, -1 is
+ returned
+
+ \sa sl_WlanProfileAdd , sl_WlanProfileGet
+ \note belongs to \ref ext_api
+ \warning
+ */
+#if _SL_INCLUDE_FUNC(sl_WlanProfileDel)
+ int16_t sl_WlanProfileDel(const int16_t Index);
+#endif
+
+ /*!
+ \brief Set policy values
+
+ \param[in] Type Type of policy to be modified. The Options are:\n
+ - SL_POLICY_CONNECTION
+ - SL_POLICY_SCAN
+ - SL_POLICY_PM
+ - SL_POLICY_P2P
+ \param[in] Policy The option value which depends on action type
+ \param[in] pVal An optional value pointer
+ \param[in] ValLen An optional value length, in bytes
+ \return On success, zero is returned. On error, -1 is
+ returned
+ \sa sl_WlanPolicyGet
+ \note belongs to \ref ext_api
+ \warning
+ \par
+ SL_POLICY_CONNECTION type defines three options available to connect the CC31xx device to the AP: \n
+
+ - If Auto Connect is set, the CC31xx device tries to automatically reconnect to one of its stored profiles, each time the connection fails or the device is rebooted.\n
+ To set this option, use: \n
+ <b> sl_WlanPolicySet(SL_POLICY_CONNECTION,SL_CONNECTION_POLICY(1,0,0,0,0),NULL,0) </b>
+ - If Fast Connect is set, the CC31xx device tries to establish a fast connection to AP. \n
+ To set this option, use: \n
+ <b> sl_WlanPolicySet(SL_POLICY_CONNECTION,SL_CONNECTION_POLICY(0,1,0,0,0),NULL,0) </b>
+ - (relevant for P2P mode only) - If Any P2P is set, CC31xx/CC32xx device tries to automatically connect to the first P2P device available, \n
+ supporting push button only. To set this option, use: \n
+ <b> sl_WlanPolicySet(SL_POLICY_CONNECTION,SL_CONNECTION_POLICY(0,0,0,1,0),NULL,0) </b>
+ - For auto smart config upon restart (any command from Host will end this state) use: \n
+ <b> sl_WlanPolicySet(SL_POLICY_CONNECTION,SL_CONNECTION_POLICY(0,0,0,0,1),NULL,0) </b> \n
+ The options above could be combined to a single action, if more than one action is required. \n
+ \par
+ SL_POLICY_SCAN defines system scan time interval.Default interval is 10 minutes. \n
+ After settings scan interval, an immediate scan is activated. The next scan will be based on the interval settings. \n
+ - For example, setting scan interval to 1 minute interval use: \n
+ uint32_t intervalInSeconds = 60; \n
+ #define SL_SCAN_ENABLE 1 \n<b>
+ sl_WlanPolicySet(SL_POLICY_SCAN,SL_SCAN_ENABLE, (uint8_t *)&intervalInSeconds,sizeof(intervalInSeconds)); </b>\n
+
+ - For example, disable scan: \n
+ #define SL_SCAN_DISABLE 0 \n<b>
+ sl_WlanPolicySet(SL_POLICY_SCAN,SL_SCAN_DISABLE,0,0); </b>\n
+ \par
+ SL_POLICY_PM defines a power management policy for Station mode only:
+ - For setting normal power management (default) policy use: <b> sl_WlanPolicySet(SL_POLICY_PM , SL_NORMAL_POLICY, NULL,0) </b>
+ - For setting low latency power management policy use: <b> sl_WlanPolicySet(SL_POLICY_PM , SL_LOW_LATENCY_POLICY, NULL,0) </b>
+ - For setting low power management policy use: <b> sl_WlanPolicySet(SL_POLICY_PM , SL_LOW_POWER_POLICY, NULL,0) </b>
+ - For setting always on power management policy use: <b> sl_WlanPolicySet(SL_POLICY_PM , SL_ALWAYS_ON_POLICY, NULL,0) </b>
+ - For setting Long Sleep Interval policy use: \n
+ uint16_t PolicyBuff[4] = {0,0,800,0}; // PolicyBuff[2] is max sleep time in mSec \n<b>
+ sl_WlanPolicySet(SL_POLICY_PM , SL_LONG_SLEEP_INTERVAL_POLICY, (uint8_t*)PolicyBuff,sizeof(PolicyBuff)); </b>\n
+
+ SL_POLICY_P2P defines p2p negotiation policy parameters for P2P role:
+ - To set intent negotiation value, set on of the following:
+ SL_P2P_ROLE_NEGOTIATE - intent 3
+ SL_P2P_ROLE_GROUP_OWNER - intent 15
+ SL_P2P_ROLE_CLIENT - intent 0
+ - To set negotiation initiator value (initiator policy of first negotiation action frame), set on of the following:
+ SL_P2P_NEG_INITIATOR_ACTIVE
+ SL_P2P_NEG_INITIATOR_PASSIVE
+ SL_P2P_NEG_INITIATOR_RAND_BACKOFF
+ For example: \n
+ <b>sl_WlanPolicySet(SL_POLICY_P2P, SL_P2P_POLICY(SL_P2P_ROLE_NEGOTIATE,SL_P2P_NEG_INITIATOR_RAND_BACKOFF),NULL,0) </b>
+
+ */
+#if _SL_INCLUDE_FUNC(sl_WlanPolicySet)
+ int16_t sl_WlanPolicySet(const uint8_t Type , const uint8_t Policy, uint8_t *pVal,const uint8_t ValLen);
+#endif
+ /*!
+ \brief get policy values
+
+ \param[in] Type SL_POLICY_CONNECTION, SL_POLICY_SCAN, SL_POLICY_PM,SL_POLICY_P2P \n
+
+ \param[in] Policy argument may be set to any value \n
+
+ \param[out] The returned values, depends on each policy type, will be stored in the allocated buffer pointed by pVal
+ with a maximum buffer length set by the calling function and pointed to by argument *pValLen
+
+ \return On success, zero is returned. On error, -1 is returned
+
+ \sa sl_WlanPolicySet
+
+ \note belongs to \ref ext_api
+
+ \warning The value pointed by the argument *pValLen should be set to a value different from 0 and
+ greater than the buffer length returned from the SL device. Otherwise, an error will be returned.
+
+ */
+#if _SL_INCLUDE_FUNC(sl_WlanPolicyGet)
+ int16_t sl_WlanPolicyGet(const uint8_t Type , uint8_t Policy,uint8_t *pVal,uint8_t *pValLen);
+#endif
+ /*!
+ \brief Gets the WLAN scan operation results
+
+ Gets scan results , gets entry from scan result table
+
+ \param[in] Index - Starting index identifier (range 0-19) for getting scan results
+ \param[in] Count - How many entries to fetch. Max is (20-"Index").
+ \param[out] pEntries - pointer to an allocated Sl_WlanNetworkEntry_t.
+ the number of array items should match "Count"
+ sec_type: SL_SCAN_SEC_TYPE_OPEN, SL_SCAN_SEC_TYPE_WEP, SL_SCAN_SEC_TYPE_WPA or SL_SCAN_SEC_TYPE_WPA2
+
+
+ \return Number of valid networks list items
+
+ \sa
+ \note belongs to \ref ext_api
+ \warning This command do not initiate any active scanning action
+ \par Example:
+ \code An example of fetching max 10 results:
+
+ Sl_WlanNetworkEntry_t netEntries[10];
+ int16_t resultsCount = sl_WlanGetNetworkList(0,10,&netEntries[0]);
+ for(i=0; i< resultsCount; i++)
+ {
+ printf("%s\n",netEntries[i].ssid);
+ }
+ \endcode
+ */
+#if _SL_INCLUDE_FUNC(sl_WlanGetNetworkList)
+ int16_t sl_WlanGetNetworkList(const uint8_t Index, const uint8_t Count, Sl_WlanNetworkEntry_t *pEntries);
+#endif
+
+ /*!
+ \brief Start collecting wlan RX statistics, for unlimited time.
+
+ \return On success, zero is returned. On error, -1 is returned
+
+ \sa sl_WlanRxStatStop sl_WlanRxStatGet
+ \note belongs to \ref ext_api
+ \warning
+ \par Example:
+ \code Getting wlan RX statistics:
+
+ void RxStatCollectTwice()
+ {
+ SlGetRxStatResponse_t rxStat;
+ int16_t rawSocket;
+ int8_t DataFrame[200];
+ struct SlTimeval_t timeval;
+ timeval.tv_sec = 0; // Seconds
+ timeval.tv_usec = 20000; // Microseconds. 10000 microseconds resolution
+
+ sl_WlanRxStatStart(); // set statistics mode
+
+ rawSocket = sl_Socket(SL_AF_RF, SL_SOCK_RAW, eChannel);
+ // set timeout - in case we have no activity for the specified channel
+ sl_SetSockOpt(rawSocket,SL_SOL_SOCKET,SL_SO_RCVTIMEO, &timeval, sizeof(timeval)); // Enable receive timeout
+ status = sl_Recv(rawSocket, DataFrame, sizeof(DataFrame), 0);
+
+ Sleep(1000); // sleep for 1 sec
+ sl_WlanRxStatGet(&rxStat,0); // statistics has been cleared upon read
+ Sleep(1000); // sleep for 1 sec
+ sl_WlanRxStatGet(&rxStat,0);
+
+ }
+ \endcode
+ */
+#if _SL_INCLUDE_FUNC(sl_WlanRxStatStart)
+ int16_t sl_WlanRxStatStart(void);
+#endif
+
+
+ /*!
+ \brief Stop collecting wlan RX statistic, (if previous called sl_WlanRxStatStart)
+
+ \return On success, zero is returned. On error, -1 is returned
+
+ \sa sl_WlanRxStatStart sl_WlanRxStatGet
+ \note belongs to \ref ext_api
+ \warning
+ */
+#if _SL_INCLUDE_FUNC(sl_WlanRxStatStop)
+ int16_t sl_WlanRxStatStop(void);
+#endif
+
+
+ /*!
+ \brief Get wlan RX statistics. upon calling this command, the statistics counters will be cleared.
+
+ \param[in] Flags should be 0 ( not applicable right now, will be added the future )
+ \param[in] pRxStat a pointer to SlGetRxStatResponse_t filled with Rx statistics results
+ \return On success, zero is returned. On error, -1 is returned
+
+ \sa sl_WlanRxStatStart sl_WlanRxStatStop
+ \note belongs to \ref ext_api
+ \warning
+ */
+#if _SL_INCLUDE_FUNC(sl_WlanRxStatGet)
+ int16_t sl_WlanRxStatGet(SlGetRxStatResponse_t *pRxStat, const uint32_t Flags);
+#endif
+
+
+ /*!
+ \brief Stop Smart Config procedure. Once Smart Config will be stopped,
+ Asynchronous event will be received - SL_OPCODE_WLAN_SMART_CONFIG_STOP_ASYNC_RESPONSE.
+
+ \param[in] none
+ \param[out] none
+
+ \return 0 - if Stop Smart Config is about to be executed without errors.
+
+ \sa sl_WlanSmartConfigStart
+ \note belongs to \ref ext_api
+ \warning
+
+ */
+#if _SL_INCLUDE_FUNC(sl_WlanSmartConfigStop)
+ int16_t sl_WlanSmartConfigStop(void);
+#endif
+
+ /*!
+ \brief Start Smart Config procedure
+ \par
+ The target of the procedure is to let the \n
+ device to gain the network parameters: SSID and Password (if network is secured) \n
+ and to connect to it once located in the network range. \n
+ An external application should be used on a device connected to any mobile network. \n
+ The external application will transmit over the air the network parameters in secured manner.\n
+ The Password may be decrypted using a Key. \n
+ The decryption method may be decided in the command or embedded in the Flash. \n
+ The procedure can be activated for 1-3 group ID in the range of BIT_0 - BIT_15 where the default group ID id 0 (BIT_0) \n
+ Once Smart Config has ended successfully, Asynchronous event will be received - \n
+ SL_OPCODE_WLAN_SMART_CONFIG_START_ASYNC_RESPONSE. \n
+ The Event will hold the SSID and an extra field that might have been delivered as well (i.e. - device name)
+
+ \param[in] groupIdBitmask - each bit represent a group ID that should be searched.
+ The Default group ID id BIT_0. 2 more group can be searched
+ in addition. The range is BIT_0 - BIT_15.
+ \param[in] chiper - 0: check in flash, 1 - AES, 0xFF - do not check in flash
+ \param[in] publicKeyLen - public key len (used for the default group ID - BIT_0)
+ \param[in] group1KeyLen - group ID1 length
+ \param[in] group2KeyLen - group ID2 length
+ \param[in] publicKey - public key (used for the default group ID - BIT_0)
+ \param[in] group1Key - group ID1 key
+ \param[in] group2Key - group ID2 key
+
+ \param[out] none
+
+ \return 0 - if Smart Config started successfully.
+
+ \sa sl_WlanSmartConfigStop
+ \note belongs to \ref ext_api
+ \warning
+ \par
+ \code An example of starting smart Config on group ID's 0 + 1 + 2
+
+ sl_WlanSmartConfigStart(7, //group ID's (BIT_0 | BIT_1 | BIT_2)
+ 1, //decrypt key by AES method
+ 16, //decryption key length for group ID0
+ 16, //decryption key length for group ID1
+ 16, //decryption key length for group ID2
+ "Key0Key0Key0Key0", //decryption key for group ID0
+ "Key1Key1Key1Key1", //decryption key for group ID1
+ "Key2Key2Key2Key2" //decryption key for group ID2
+ );
+ \endcode
+ */
+#if _SL_INCLUDE_FUNC(sl_WlanSmartConfigStart)
+ int16_t sl_WlanSmartConfigStart(const uint32_t groupIdBitmask,
+ const uint8_t cipher,
+ const uint8_t publicKeyLen,
+ const uint8_t group1KeyLen,
+ const uint8_t group2KeyLen,
+ const uint8_t* publicKey,
+ const uint8_t* group1Key,
+ const uint8_t* group2Key);
+#endif
+
+
+ /*!
+ \brief Wlan set mode
+
+ Setting WLAN mode
+
+ \param[in] mode - WLAN mode to start the CC31xx device. Possible options are:
+ - ROLE_STA - for WLAN station mode
+ - ROLE_AP - for WLAN AP mode
+ - ROLE_P2P -for WLAN P2P mode
+ \return 0 - if mode was set correctly
+ \sa sl_Start sl_Stop
+ \note belongs to \ref ext_api
+ \warning After setting the mode the system must be restarted for activating the new mode
+ \par Example:
+ \code
+ //Switch from any role to STA:
+ sl_WlanSetMode(ROLE_STA);
+ sl_Stop(0);
+ sl_Start(NULL,NULL,NULL);
+ \endcode
+
+ */
+#if _SL_INCLUDE_FUNC(sl_WlanSetMode)
+ int16_t sl_WlanSetMode(const uint8_t mode);
+#endif
+
+
+ /*!
+ \brief Internal function for setting WLAN configurations
+
+ \return On success, zero is returned. On error one of the following error codes returned:
+ - CONF_ERROR (-1)
+ - CONF_NVMEM_ACCESS_FAILED (-2)
+ - CONF_OLD_FILE_VERSION (-3)
+ - CONF_ERROR_NO_SUCH_COUNTRY_CODE (-4)
+
+
+ \param[in] ConfigId - configuration id
+ - <b>SL_WLAN_CFG_AP_ID</b>
+ - <b>SL_WLAN_CFG_GENERAL_PARAM_ID</b>
+ - <b>SL_WLAN_CFG_P2P_PARAM_ID</b>
+
+ \param[in] ConfigOpt - configurations option
+ - <b>SL_WLAN_CFG_AP_ID</b>
+ - <b>WLAN_AP_OPT_SSID</b> \n
+ Set SSID for AP mode. \n
+ This options takes <b>uint8_t</b> buffer as parameter
+ - <b>WLAN_AP_OPT_CHANNEL</b> \n
+ Set channel for AP mode. \n
+ The channel is dependant on the country code which is set. i.e. for "US" the channel should be in the range of [1-11] \n
+ This option takes <b>uint8_t</b> as a parameter
+ - <b>WLAN_AP_OPT_HIDDEN_SSID</b> \n
+ Set Hidden SSID Mode for AP mode.Hidden options: \n
+ 0: disabled \n
+ 1: Send empty (length=0) SSID in beacon and ignore probe request for broadcast SSID \n
+ 2: Clear SSID (ASCII 0), but keep the original length (this may be required with some \n
+ clients that do not support empty SSID) and ignore probe requests for broadcast SSID \n
+ This option takes <b>uint8_t</b> as a parameter
+ - <b>WLAN_AP_OPT_SECURITY_TYPE</b> \n
+ Set Security type for AP mode. Security options are:
+ - Open security: SL_SEC_TYPE_OPEN
+ - WEP security: SL_SEC_TYPE_WEP
+ - WPA security: SL_SEC_TYPE_WPA_WPA2 \n
+ This option takes <b>uint8_t</b> pointer as a parameter
+ - <b>WLAN_AP_OPT_PASSWORD</b> \n
+ Set Password for for AP mode (for WEP or for WPA): \n
+ Password - for WPA: 8 - 63 characters \n
+ for WEP: 5 / 13 characters (ascii) \n
+ This options takes <b>uint8_t</b> buffer as parameter
+ - <b>SL_WLAN_CFG_GENERAL_PARAM_ID</b>
+ - <b> WLAN_GENERAL_PARAM_OPT_SCAN_PARAMS </b> \n
+ Set scan parameters.
+ This option uses slWlanScanParamCommand_t as parameter
+ - <b>WLAN_GENERAL_PARAM_OPT_COUNTRY_CODE</b> \n
+ Set Country Code for AP mode \n
+ This options takes <b>uint8_t</b> 2 bytes buffer as parameter
+ - <b>WLAN_GENERAL_PARAM_OPT_STA_TX_POWER</b> \n
+ Set STA mode Tx power level \n
+ Number between 0-15, as dB offset from max power (0 will set MAX power) \n
+ This options takes <b>uint8_t</b> as parameter
+ - <b>WLAN_GENERAL_PARAM_OPT_AP_TX_POWER</b>
+ Set AP mode Tx power level \n
+ Number between 0-15, as dB offset from max power (0 will set MAX power) \n
+ This options takes <b>uint8_t</b> as parameter
+ - <b>WLAN_GENERAL_PARAM_OPT_INFO_ELEMENT</b>
+ Set Info Element for AP mode. \n
+ The Application can set up to MAX_PRIVATE_INFO_ELEMENTS_SUPPROTED info elements per Role (AP / P2P GO). \n
+ To delete an info element use the relevant index and length = 0. \n
+ The Application can set up to MAX_PRIVATE_INFO_ELEMENTS_SUPPROTED to the same role. \n
+ However, for AP - no more than INFO_ELEMENT_MAX_TOTAL_LENGTH_AP bytes can be stored for all info elements. \n
+ For P2P GO - no more than INFO_ELEMENT_MAX_TOTAL_LENGTH_P2P_GO bytes can be stored for all info elements. \n
+ This option takes sl_protocol_WlanSetInfoElement_t as parameter
+ - <b>SL_WLAN_CFG_P2P_PARAM_ID</b>
+ - <b>WLAN_P2P_OPT_DEV_TYPE</b> \n
+ Set P2P Device type.Maximum length of 17 characters. Device type is published under P2P I.E, \n
+ allows to make devices easier to recognize. \n
+ In case no device type is set, the default type is "1-0050F204-1" \n
+ This options takes <b>uint8_t</b> buffer as parameter
+ - <b>WLAN_P2P_OPT_CHANNEL_N_REGS</b> \n
+ Set P2P Channels. \n
+ listen channel (either 1/6/11 for 2.4GHz) \n
+ listen regulatory class (81 for 2.4GHz) \n
+ oper channel (either 1/6/11 for 2.4GHz) \n
+ oper regulatory class (81 for 2.4GHz) \n
+ listen channel and regulatory class will determine the device listen channel during p2p find listen phase \n
+ oper channel and regulatory class will determine the operating channel preferred by this device (in case it is group owner this will be the operating channel) \n
+ channels should be one of the social channels (1/6/11). In case no listen/oper channel selected, a random 1/6/11 will be selected.
+ This option takes pointer to <b>uint8_t[4]</b> as parameter
+
+ \param[in] ConfigLen - configurations len
+
+ \param[in] pValues - configurations values
+
+ \sa
+ \note
+ \warning
+ \par Examples:
+ \par
+ <b> WLAN_AP_OPT_SSID: </b>
+ \code
+ uint8_t str[33];
+ memset(str, 0, 33);
+ memcpy(str, ssid, len); // ssid string of 32 characters
+ sl_WlanSet(SL_WLAN_CFG_AP_ID, WLAN_AP_OPT_SSID, strlen(ssid), str);
+ \endcode
+ \par
+ <b> WLAN_AP_OPT_CHANNEL: </b>
+ \code
+ uint8_t val = channel;
+ sl_WlanSet(SL_WLAN_CFG_AP_ID, WLAN_AP_OPT_CHANNEL, 1, (uint8_t *)&val);
+ \endcode
+ \par
+ <b> WLAN_AP_OPT_HIDDEN_SSID: </b>
+ \code
+ uint8_t val = hidden;
+ sl_WlanSet(SL_WLAN_CFG_AP_ID, WLAN_AP_OPT_HIDDEN_SSID, 1, (uint8_t *)&val);
+ \endcode
+ \par
+ <b> WLAN_AP_OPT_SECURITY_TYPE: </b>
+ \code
+ uint8_t val = SL_SEC_TYPE_WPA_WPA2;
+ sl_WlanSet(SL_WLAN_CFG_AP_ID, WLAN_AP_OPT_SECURITY_TYPE, 1, (uint8_t *)&val);
+ \endcode
+ \par
+ <b> WLAN_AP_OPT_PASSWORD: </b>
+ \code
+ uint8_t str[65];
+ uint16_t len = strlen(password);
+ memset(str, 0, 65);
+ memcpy(str, password, len);
+ sl_WlanSet(SL_WLAN_CFG_AP_ID, WLAN_AP_OPT_PASSWORD, len, (uint8_t *)str);
+ \endcode
+ \par
+ <b> WLAN_GENERAL_PARAM_OPT_STA_TX_POWER: </b>
+ \code
+ uint8_t stapower=(uint8_t)power;
+ sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID, WLAN_GENERAL_PARAM_OPT_STA_TX_POWER,1,(uint8_t *)&stapower);
+ \endcode
+ \par
+ <b> WLAN_GENERAL_PARAM_OPT_SCAN_PARAMS: </b>
+ \code
+ slWlanScanParamCommand_t ScanParamConfig;
+ ScanParamConfig.G_Channels_mask = 0x01; // bit mask for channels:1 means channel 1 is enabled, 3 means channels 1 + 2 are enabled
+ ScanParamConfig.rssiThershold = -70; // only for RSSI level which is higher than -70
+ sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID ,WLAN_GENERAL_PARAM_OPT_SCAN_PARAMS,sizeof(slWlanScanParamCommand_t),(_u8*)&ScanParamConfig);
+ \endcode
+ \par
+ <b> WLAN_GENERAL_PARAM_OPT_COUNTRY_CODE: </b>
+ \code
+ uint8_t* str = (uint8_t *) country; // string of 2 characters. i.e. - "US"
+ sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID, WLAN_GENERAL_PARAM_OPT_COUNTRY_CODE, 2, str);
+ \endcode
+ \par
+ <b> WLAN_GENERAL_PARAM_OPT_AP_TX_POWER: </b>
+ \code
+ uint8_t appower=(uint8_t)power;
+ sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID, WLAN_GENERAL_PARAM_OPT_AP_TX_POWER,1,(uint8_t *)&appower);
+ \endcode
+ \par
+ <b> WLAN_P2P_OPT_DEV_TYPE: </b>
+ \code
+ uint8_t str[17];
+ uint16_t len = strlen(device_type);
+ memset(str, 0, 17);
+ memcpy(str, device_type, len);
+ sl_WlanSet(SL_WLAN_CFG_P2P_PARAM_ID, WLAN_P2P_OPT_DEV_TYPE, len, str);
+ \endcode
+ \par
+ <b> WLAN_P2P_OPT_CHANNEL_N_REGS: </b>
+ \code
+ uint8_t str[4];
+ str[0] = (uint8_t)11; // listen channel
+ str[1] = (uint8_t)81; // listen regulatory class
+ str[2] = (uint8_t)6; // oper channel
+ str[3] = (uint8_t)81; // oper regulatory class
+ sl_WlanSet(SL_WLAN_CFG_P2P_PARAM_ID, WLAN_P2P_OPT_CHANNEL_N_REGS, 4, str);
+ \endcode
+ \par
+ <b> WLAN_GENERAL_PARAM_OPT_INFO_ELEMENT: </b>
+ \code
+ sl_protocol_WlanSetInfoElement_t infoele;
+ infoele.index = Index; // Index of the info element. range: 0 - MAX_PRIVATE_INFO_ELEMENTS_SUPPROTED
+ infoele.role = Role; // INFO_ELEMENT_AP_ROLE (0) or INFO_ELEMENT_P2P_GO_ROLE (1)
+ infoele.ie.id = Id; // Info element ID. if INFO_ELEMENT_DEFAULT_ID (0) is set, ID will be set to 221.
+ // Organization unique ID. If all 3 bytes are zero - it will be replaced with 08,00,28.
+ infoele.ie.oui[0] = Oui0; // Organization unique ID first Byte
+ infoele.ie.oui[1] = Oui1; // Organization unique ID second Byte
+ infoele.ie.oui[2] = Oui2; // Organization unique ID third Byte
+ infoele.ie.length = Len; // Length of the info element. must be smaller than 253 bytes
+ memset(infoele.ie.data, 0, INFO_ELEMENT_MAX_SIZE);
+ if ( Len <= INFO_ELEMENT_MAX_SIZE )
+ {
+ memcpy(infoele.ie.data, IE, Len); // Info element. length of the info element is [0-252]
+ sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID,WLAN_GENERAL_PARAM_OPT_INFO_ELEMENT,sizeof(sl_protocol_WlanSetInfoElement_t),(uint8_t* ) &infoele);
+ }
+ sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID,WLAN_GENERAL_PARAM_OPT_INFO_ELEMENT,sizeof(sl_protocol_WlanSetInfoElement_t),(uint8_t* ) &infoele);
+ \endcode
+
+ */
+#if _SL_INCLUDE_FUNC(sl_WlanSet)
+ int16_t sl_WlanSet(const uint16_t ConfigId ,const uint16_t ConfigOpt, const uint16_t ConfigLen, const uint8_t *pValues);
+#endif
+
+ /*!
+ \brief Internal function for getting WLAN configurations
+
+ \return On success, zero is returned. On error, -1 is
+ returned
+
+ \param[in] ConfigId - configuration id
+ - <b>SL_WLAN_CFG_AP_ID</b>
+ - <b>SL_WLAN_CFG_GENERAL_PARAM_ID</b>
+ - <b>SL_WLAN_CFG_P2P_PARAM_ID</b>
+
+ \param[out] pConfigOpt - get configurations option
+ - <b>SL_WLAN_CFG_AP_ID</b>
+ - <b>WLAN_AP_OPT_SSID</b> \n
+ Get SSID for AP mode. \n
+ Get up to 32 characters of SSID \n
+ This options takes <b>uint8_t</b> as parameter
+ - <b>WLAN_AP_OPT_CHANNEL</b> \n
+ Get channel for AP mode. \n
+ This option takes <b>uint8_t</b> as a parameter
+ - <b>WLAN_AP_OPT_HIDDEN_SSID</b> \n
+ Get Hidden SSID Mode for AP mode.Hidden options: \n
+ 0: disabled \n
+ 1: Send empty (length=0) SSID in beacon and ignore probe request for broadcast SSID \n
+ 2: Clear SSID (ASCII 0), but keep the original length (this may be required with some \n
+ clients that do not support empty SSID) and ignore probe requests for broadcast SSID \n
+ This option takes <b>uint8_t</b> as a parameter
+ - <b>WLAN_AP_OPT_SECURITY_TYPE</b> \n
+ Get Security type for AP mode. Security options are:
+ - Open security: SL_SEC_TYPE_OPEN
+ - WEP security: SL_SEC_TYPE_WEP
+ - WPA security: SL_SEC_TYPE_WPA_WPA2 \n
+ This option takes <b>uint8_t</b> as a parameter
+ - <b>WLAN_AP_OPT_PASSWORD</b> \n
+ Get Password for for AP mode (for WEP or for WPA): \n
+ Returns password - string, fills up to 64 characters. \n
+ This options takes <b>uint8_t</b> buffer as parameter
+ - <b>SL_WLAN_CFG_GENERAL_PARAM_ID</b>
+ - <b> WLAN_GENERAL_PARAM_OPT_SCAN_PARAMS </b> \n
+ Get scan parameters.
+ This option uses slWlanScanParamCommand_t as parameter
+ - <b>WLAN_GENERAL_PARAM_OPT_COUNTRY_CODE</b> \n
+ Get Country Code for AP mode \n
+ This options takes <b>uint8_t</b> buffer as parameter
+ - <b>WLAN_GENERAL_PARAM_OPT_STA_TX_POWER</b> \n
+ Get STA mode Tx power level \n
+ Number between 0-15, as dB offset from max power (0 indicates MAX power) \n
+ This options takes <b>uint8_t</b> as parameter
+ - <b>WLAN_GENERAL_PARAM_OPT_AP_TX_POWER</b>
+ Get AP mode Tx power level \n
+ Number between 0-15, as dB offset from max power (0 indicates MAX power) \n
+ This options takes <b>uint8_t</b> as parameter
+ - <b>SL_WLAN_CFG_P2P_PARAM_ID</b>
+ - <b>WLAN_P2P_OPT_CHANNEL_N_REGS</b> \n
+ Get P2P Channels. \n
+ listen channel (either 1/6/11 for 2.4GHz) \n
+ listen regulatory class (81 for 2.4GHz) \n
+ oper channel (either 1/6/11 for 2.4GHz) \n
+ oper regulatory class (81 for 2.4GHz) \n
+ listen channel and regulatory class will determine the device listen channel during p2p find listen phase \n
+ oper channel and regulatory class will determine the operating channel preferred by this device (in case it is group owner this will be the operating channel) \n
+ channels should be one of the social channels (1/6/11). In case no listen/oper channel selected, a random 1/6/11 will be selected. \n
+ This option takes pointer to <b>uint8_t[4]</b> as parameter
+
+ \param[out] pConfigLen - The length of the allocated memory as input, when the
+ function complete, the value of this parameter would be
+ the len that actually read from the device.
+ If the device return length that is longer from the input
+ value, the function will cut the end of the returned structure
+ and will return SL_ESMALLBUF.
+
+
+ \param[out] pValues - get configurations values
+
+ \sa sl_WlanSet
+
+ \note
+
+ \warning
+
+ \par Examples:
+ \par
+ <b> WLAN_GENERAL_PARAM_OPT_SCAN_PARAMS: </b>
+ \code
+ slWlanScanParamCommand_t ScanParamConfig;
+ uint16_t Option = WLAN_GENERAL_PARAM_OPT_SCAN_PARAMS;
+ uint16_t OptionLen = sizeof(slWlanScanParamCommand_t);
+ sl_WlanGet(SL_WLAN_CFG_GENERAL_PARAM_ID ,&Option,&OptionLen,(uint8_t *)&ScanParamConfig);
+ \endcode
+ \par
+ <b> WLAN_GENERAL_PARAM_OPT_AP_TX_POWER: </b>
+ \code
+ _i8 TXPower = 0;
+ _u16 Option = WLAN_GENERAL_PARAM_OPT_AP_TX_POWER;
+ _u16 OptionLen = sizeof(_i8);
+ sl_WlanGet(SL_WLAN_CFG_GENERAL_PARAM_ID ,&Option,&OptionLen,(_u8 *)&TXPower);
+ \endcode
+ \par
+ <b> WLAN_GENERAL_PARAM_OPT_STA_TX_POWER: </b>
+ \code
+ _i8 TXPower = 0;
+ _u16 Option = WLAN_GENERAL_PARAM_OPT_STA_TX_POWER;
+ _u16 OptionLen = sizeof(_i8);
+
+ sl_WlanGet(SL_WLAN_CFG_GENERAL_PARAM_ID ,&Option,&OptionLen,(uint8_t *)&TXPower);
+ \endcode
+ \par
+ <b> WLAN_P2P_OPT_DEV_TYPE: </b>
+ \code
+ int8_t device_type[18];
+ uint16_t len = 18;
+ uint16_t config_opt = WLAN_P2P_OPT_DEV_TYPE;
+ sl_WlanGet(SL_WLAN_CFG_P2P_PARAM_ID, &config_opt , &len, (uint8_t* )device_type);
+ \endcode
+ \par
+ <b> WLAN_AP_OPT_SSID: </b>
+ \code
+ int8_t ssid[32];
+ uint16_t len = 32;
+ uint16_t config_opt = WLAN_AP_OPT_SSID;
+ sl_WlanGet(SL_WLAN_CFG_AP_ID, &config_opt , &len, (uint8_t* )ssid);
+ \endcode
+ \par
+ <b> WLAN_GENERAL_PARAM_OPT_COUNTRY_CODE: </b>
+ \code
+ int8_t country[3];
+ uint16_t len = 3;
+ uint16_t config_opt = WLAN_GENERAL_PARAM_OPT_COUNTRY_CODE;
+ sl_WlanGet(SL_WLAN_CFG_GENERAL_PARAM_ID, &config_opt, &len, (uint8_t* )country);
+ \endcode
+ \par
+ <b> WLAN_AP_OPT_CHANNEL: </b>
+ \code
+ int8_t channel;
+ uint16_t len = 1;
+ uint16_t config_opt = WLAN_AP_OPT_CHANNEL;
+ sl_WlanGet(SL_WLAN_CFG_AP_ID, &config_opt, &len, (uint8_t* )&channel);
+ \endcode
+ \par
+ <b> WLAN_AP_OPT_HIDDEN_SSID: </b>
+ \code
+ uint8_t hidden;
+ uint16_t len = 1;
+ uint16_t config_opt = WLAN_AP_OPT_HIDDEN_SSID;
+ sl_WlanGet(SL_WLAN_CFG_AP_ID, &config_opt, &len, (uint8_t* )&hidden);
+ \endcode
+ \par
+ <b> WLAN_AP_OPT_SECURITY_TYPE: </b>
+ \code
+ uint8_t sec_type;
+ uint16_t len = 1;
+ uint16_t config_opt = WLAN_AP_OPT_SECURITY_TYPE;
+ sl_WlanGet(SL_WLAN_CFG_AP_ID, &config_opt, &len, (uint8_t* )&sec_type);
+ \endcode
+ \par
+ <b> WLAN_AP_OPT_PASSWORD: </b>
+ \code
+ uint8_t password[64];
+ uint16_t len = 64;
+ memset(password,0,64);
+ uint16_t config_opt = WLAN_AP_OPT_PASSWORD;
+ sl_WlanGet(SL_WLAN_CFG_AP_ID, &config_opt, &len, (uint8_t* )password);
+
+ \endcode
+ \par
+ <b> WLAN_P2P_OPT_CHANNEL_N_REGS: </b>
+ \code
+ uint16_t listen_channel,listen_reg,oper_channel,oper_reg;
+ uint16_t len = 4;
+ uint16_t config_opt = WLAN_P2P_OPT_CHANNEL_N_REGS;
+ uint8_t channel_n_regs[4];
+ sl_WlanGet(SL_WLAN_CFG_P2P_PARAM_ID, &config_opt, &len, (uint8_t* )channel_n_regs);
+ listen_channel = channel_n_regs[0];
+ listen_reg = channel_n_regs[1];
+ oper_channel = channel_n_regs[2];
+ oper_reg = channel_n_regs[3];
+ \endcode
+ */
+
+#if _SL_INCLUDE_FUNC(sl_WlanGet)
+ int16_t sl_WlanGet(const uint16_t ConfigId, uint16_t *pConfigOpt,uint16_t *pConfigLen, uint8_t *pValues);
+#endif
+
+private:
+
+ cc3100_driver &_driver;
+ cc3100_wlan_rx_filters &_wlan_filters;
+
+ /*!
+
+ Close the Doxygen group.
+ @}
+
+ */
+
+};//class
+
+}//namespace mbed_cc3100
+
+#endif /* __WLAN_H__ */
+
+
Repository toolbox
| Export to desktop IDE |
| Build repository |
Repository details
| Type: | Program |
|---|---|
| Mbed OS support: | Mbed 2 deprecated |
| Created: | 26 May 2017 |
| Imports: | 0 |
| Forks: | 0 |
| Commits: | 10 |
| Dependents: | 0 |
| Dependencies: | 3 |
| Followers: | 2 |
