Arturo Pesaro / Mbed 2 deprecated cc3100_Socket_Wifi_Server_PROVA

cc3100_Socket_Wifi_Server with Ethernet Interface not working

Dependencies:   EthernetInterface mbed-rtos mbed

Fork of cc3100_Test_Demo by David Fletcher

simplelink/cc3100_socket.h@0:e89ba455dbcf, 2015-02-10 (annotated)

Committer:
dflet
Date:
Tue Feb 10 12:09:29 2015 +0000
Revision:
0:e89ba455dbcf
For test only! Not much has been tested, but the 2 demo apps run ok. Alot more work needs to be done!

Who changed what in which revision?

UserRevisionLine numberNew contents of line
dflet 0:e89ba455dbcf 1 /*
dflet 0:e89ba455dbcf 2 * socket.h - CC31xx/CC32xx Host Driver Implementation
dflet 0:e89ba455dbcf 3 *
dflet 0:e89ba455dbcf 4 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
dflet 0:e89ba455dbcf 5 *
dflet 0:e89ba455dbcf 6 *
dflet 0:e89ba455dbcf 7 * Redistribution and use in source and binary forms, with or without
dflet 0:e89ba455dbcf 8 * modification, are permitted provided that the following conditions
dflet 0:e89ba455dbcf 9 * are met:
dflet 0:e89ba455dbcf 10 *
dflet 0:e89ba455dbcf 11 * Redistributions of source code must retain the above copyright
dflet 0:e89ba455dbcf 12 * notice, this list of conditions and the following disclaimer.
dflet 0:e89ba455dbcf 13 *
dflet 0:e89ba455dbcf 14 * Redistributions in binary form must reproduce the above copyright
dflet 0:e89ba455dbcf 15 * notice, this list of conditions and the following disclaimer in the
dflet 0:e89ba455dbcf 16 * documentation and/or other materials provided with the
dflet 0:e89ba455dbcf 17 * distribution.
dflet 0:e89ba455dbcf 18 *
dflet 0:e89ba455dbcf 19 * Neither the name of Texas Instruments Incorporated nor the names of
dflet 0:e89ba455dbcf 20 * its contributors may be used to endorse or promote products derived
dflet 0:e89ba455dbcf 21 * from this software without specific prior written permission.
dflet 0:e89ba455dbcf 22 *
dflet 0:e89ba455dbcf 23 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
dflet 0:e89ba455dbcf 24 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
dflet 0:e89ba455dbcf 25 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
dflet 0:e89ba455dbcf 26 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
dflet 0:e89ba455dbcf 27 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
dflet 0:e89ba455dbcf 28 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
dflet 0:e89ba455dbcf 29 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
dflet 0:e89ba455dbcf 30 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
dflet 0:e89ba455dbcf 31 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
dflet 0:e89ba455dbcf 32 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
dflet 0:e89ba455dbcf 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
dflet 0:e89ba455dbcf 34 *
dflet 0:e89ba455dbcf 35 */
dflet 0:e89ba455dbcf 36
dflet 0:e89ba455dbcf 37 #ifndef SL_SOCKET_H_
dflet 0:e89ba455dbcf 38 #define SL_SOCKET_H_
dflet 0:e89ba455dbcf 39
dflet 0:e89ba455dbcf 40 /*****************************************************************************/
dflet 0:e89ba455dbcf 41 /* Include files */
dflet 0:e89ba455dbcf 42 /*****************************************************************************/
dflet 0:e89ba455dbcf 43 #include "cc3100_simplelink.h"
dflet 0:e89ba455dbcf 44 #include "cc3100_protocol.h"
dflet 0:e89ba455dbcf 45
dflet 0:e89ba455dbcf 46 namespace mbed_cc3100 {
dflet 0:e89ba455dbcf 47
dflet 0:e89ba455dbcf 48 //#include "cc3100_driver.h"
dflet 0:e89ba455dbcf 49
dflet 0:e89ba455dbcf 50 /*!
dflet 0:e89ba455dbcf 51
dflet 0:e89ba455dbcf 52 \addtogroup socket
dflet 0:e89ba455dbcf 53 @{
dflet 0:e89ba455dbcf 54
dflet 0:e89ba455dbcf 55 */
dflet 0:e89ba455dbcf 56
dflet 0:e89ba455dbcf 57 /*****************************************************************************/
dflet 0:e89ba455dbcf 58 /* Macro declarations */
dflet 0:e89ba455dbcf 59 /*****************************************************************************/
dflet 0:e89ba455dbcf 60
dflet 0:e89ba455dbcf 61 const uint8_t SL_FD_SETSIZE = SL_MAX_SOCKETS; /* Number of sockets to select on - same is max sockets! */
dflet 0:e89ba455dbcf 62 const uint8_t BSD_SOCKET_ID_MASK = (0x0F); /* Index using the LBS 4 bits for socket id 0-7 */
dflet 0:e89ba455dbcf 63 /* Define some BSD protocol constants. */
dflet 0:e89ba455dbcf 64 const uint8_t SL_SOCK_STREAM = (1); /* TCP Socket */
dflet 0:e89ba455dbcf 65 const uint8_t SL_SOCK_DGRAM = (2); /* UDP Socket */
dflet 0:e89ba455dbcf 66 const uint8_t SL_SOCK_RAW = (3); /* Raw socket */
dflet 0:e89ba455dbcf 67 const uint8_t SL_IPPROTO_TCP = (6); /* TCP Raw Socket */
dflet 0:e89ba455dbcf 68 const uint8_t SL_IPPROTO_UDP = (17); /* UDP Raw Socket */
dflet 0:e89ba455dbcf 69 const uint8_t SL_IPPROTO_RAW = (255); /* Raw Socket */
dflet 0:e89ba455dbcf 70 const uint8_t SL_SEC_SOCKET = (100); /* Secured Socket Layer (SSL,TLS) */
dflet 0:e89ba455dbcf 71
dflet 0:e89ba455dbcf 72 /* Address families. */
dflet 0:e89ba455dbcf 73 const uint8_t SL_AF_INET = (2); /* IPv4 socket (UDP, TCP, etc) */
dflet 0:e89ba455dbcf 74 const uint8_t SL_AF_INET6 = (3); /* IPv6 socket (UDP, TCP, etc) */
dflet 0:e89ba455dbcf 75 const uint8_t SL_AF_INET6_EUI_48 = (9);
dflet 0:e89ba455dbcf 76 const uint8_t AF_INET = SL_AF_INET;
dflet 0:e89ba455dbcf 77 const uint8_t AF_INET6 = SL_AF_INET6;
dflet 0:e89ba455dbcf 78 const uint8_t SL_AF_RF = (6); /* data include RF parameter, All layer by user (Wifi could be disconnected) */
dflet 0:e89ba455dbcf 79 const uint8_t SL_AF_PACKET = (17);
dflet 0:e89ba455dbcf 80 /* Protocol families, same as address families. */
dflet 0:e89ba455dbcf 81 const uint8_t SL_PF_INET = AF_INET;
dflet 0:e89ba455dbcf 82 const uint8_t SL_PF_INET6 = AF_INET6;
dflet 0:e89ba455dbcf 83 const uint8_t SL_INADDR_ANY = (0); /* bind any address */
dflet 0:e89ba455dbcf 84
dflet 0:e89ba455dbcf 85 /* error codes */
dflet 0:e89ba455dbcf 86 const int8_t SL_SOC_ERROR = (-1); /* Failure. */
dflet 0:e89ba455dbcf 87 const int8_t SL_SOC_OK = ( 0); /* Success. */
dflet 0:e89ba455dbcf 88 const int8_t SL_INEXE = (-8); /* socket command in execution */
dflet 0:e89ba455dbcf 89 const int8_t SL_EBADF = (-9); /* Bad file number */
dflet 0:e89ba455dbcf 90 const int8_t SL_ENSOCK = (-10); /* The system limit on the total number of open socket, has been reached */
dflet 0:e89ba455dbcf 91 const int8_t SL_EAGAIN = (-11); /* Try again */
dflet 0:e89ba455dbcf 92 const int8_t SL_EWOULDBLOCK = SL_EAGAIN;
dflet 0:e89ba455dbcf 93 const int8_t SL_ENOMEM = (-12); /* Out of memory */
dflet 0:e89ba455dbcf 94 const int8_t SL_EACCES = (-13); /* Permission denied */
dflet 0:e89ba455dbcf 95 const int8_t SL_EFAULT = (-14); /* Bad address */
dflet 0:e89ba455dbcf 96 const int8_t SL_ECLOSE = (-15); /* close socket operation failed to transmit all queued packets */
dflet 0:e89ba455dbcf 97 const int8_t SL_EALREADY_ENABLED = (-21); /* Transceiver - Transceiver already ON. there could be only one */
dflet 0:e89ba455dbcf 98 const int8_t SL_EINVAL = (-22); /* Invalid argument */
dflet 0:e89ba455dbcf 99 const int8_t SL_EAUTO_CONNECT_OR_CONNECTING = (-69); /* Transceiver - During connection, connected or auto mode started */
dflet 0:e89ba455dbcf 100 const int8_t SL_CONNECTION_PENDING = (-72); /* Transceiver - Device is connected, disconnect first to open transceiver */
dflet 0:e89ba455dbcf 101 const int8_t SL_EUNSUPPORTED_ROLE = (-86); /* Transceiver - Trying to start when WLAN role is AP or P2P GO */
dflet 0:e89ba455dbcf 102 const int8_t SL_EDESTADDRREQ = (-89); /* Destination address required */
dflet 0:e89ba455dbcf 103 const int8_t SL_EPROTOTYPE = (-91); /* Protocol wrong type for socket */
dflet 0:e89ba455dbcf 104 const int8_t SL_ENOPROTOOPT = (-92); /* Protocol not available */
dflet 0:e89ba455dbcf 105 const int8_t SL_EPROTONOSUPPORT = (-93); /* Protocol not supported */
dflet 0:e89ba455dbcf 106 const int8_t SL_ESOCKTNOSUPPORT = (-94); /* Socket type not supported */
dflet 0:e89ba455dbcf 107 const int8_t SL_EOPNOTSUPP = (-95); /* Operation not supported on transport endpoint */
dflet 0:e89ba455dbcf 108 const int8_t SL_EAFNOSUPPORT = (-97); /* Address family not supported by protocol */
dflet 0:e89ba455dbcf 109 const int8_t SL_EADDRINUSE = (-98); /* Address already in use */
dflet 0:e89ba455dbcf 110 const int8_t SL_EADDRNOTAVAIL = (-99); /* Cannot assign requested address */
dflet 0:e89ba455dbcf 111 const int8_t SL_ENETUNREACH = (-101); /* Network is unreachable */
dflet 0:e89ba455dbcf 112 const int8_t SL_ENOBUFS = (-105); /* No buffer space available */
dflet 0:e89ba455dbcf 113 const int8_t SL_EOBUFF = SL_ENOBUFS;
dflet 0:e89ba455dbcf 114 const int8_t SL_EISCONN = (-106); /* Transport endpoint is already connected */
dflet 0:e89ba455dbcf 115 const int8_t SL_ENOTCONN = (-107); /* Transport endpoint is not connected */
dflet 0:e89ba455dbcf 116 const int8_t SL_ETIMEDOUT = (-110); /* Connection timed out */
dflet 0:e89ba455dbcf 117 const int8_t SL_ECONNREFUSED = (-111); /* Connection refused */
dflet 0:e89ba455dbcf 118 const int8_t SL_EALREADY = (-114); /* Non blocking connect in progress, try again */
dflet 0:e89ba455dbcf 119
dflet 0:e89ba455dbcf 120 const int16_t SL_ESEC_RSA_WRONG_TYPE_E = (-130); /* RSA wrong block type for RSA function */
dflet 0:e89ba455dbcf 121 const int16_t SL_ESEC_RSA_BUFFER_E = (-131); /* RSA buffer error, output too small or */
dflet 0:e89ba455dbcf 122 const int16_t SL_ESEC_BUFFER_E = (-132); /* output buffer too small or input too large */
dflet 0:e89ba455dbcf 123 const int16_t SL_ESEC_ALGO_ID_E = (-133); /* setting algo id error */
dflet 0:e89ba455dbcf 124 const int16_t SL_ESEC_PUBLIC_KEY_E = (-134); /* setting public key error */
dflet 0:e89ba455dbcf 125 const int16_t SL_ESEC_DATE_E = (-135); /* setting date validity error */
dflet 0:e89ba455dbcf 126 const int16_t SL_ESEC_SUBJECT_E = (-136); /* setting subject name error */
dflet 0:e89ba455dbcf 127 const int16_t SL_ESEC_ISSUER_E = (-137); /* setting issuer name error */
dflet 0:e89ba455dbcf 128 const int16_t SL_ESEC_CA_TRUE_E = (-138); /* setting CA basic constraint true error */
dflet 0:e89ba455dbcf 129 const int16_t SL_ESEC_EXTENSIONS_E = (-139); /* setting extensions error */
dflet 0:e89ba455dbcf 130 const int16_t SL_ESEC_ASN_PARSE_E = (-140); /* ASN parsing error, invalid input */
dflet 0:e89ba455dbcf 131 const int16_t SL_ESEC_ASN_VERSION_E = (-141); /* ASN version error, invalid number */
dflet 0:e89ba455dbcf 132 const int16_t SL_ESEC_ASN_GETINT_E = (-142); /* ASN get big int16_t error, invalid data */
dflet 0:e89ba455dbcf 133 const int16_t SL_ESEC_ASN_RSA_KEY_E = (-143); /* ASN key init error, invalid input */
dflet 0:e89ba455dbcf 134 const int16_t SL_ESEC_ASN_OBJECT_ID_E = (-144); /* ASN object id error, invalid id */
dflet 0:e89ba455dbcf 135 const int16_t SL_ESEC_ASN_TAG_NULL_E = (-145); /* ASN tag error, not null */
dflet 0:e89ba455dbcf 136 const int16_t SL_ESEC_ASN_EXPECT_0_E = (-146); /* ASN expect error, not zero */
dflet 0:e89ba455dbcf 137 const int16_t SL_ESEC_ASN_BITSTR_E = (-147); /* ASN bit string error, wrong id */
dflet 0:e89ba455dbcf 138 const int16_t SL_ESEC_ASN_UNKNOWN_OID_E = (-148); /* ASN oid error, unknown sum id */
dflet 0:e89ba455dbcf 139 const int16_t SL_ESEC_ASN_DATE_SZ_E = (-149); /* ASN date error, bad size */
dflet 0:e89ba455dbcf 140 const int16_t SL_ESEC_ASN_BEFORE_DATE_E = (-150); /* ASN date error, current date before */
dflet 0:e89ba455dbcf 141 const int16_t SL_ESEC_ASN_AFTER_DATE_E = (-151); /* ASN date error, current date after */
dflet 0:e89ba455dbcf 142 const int16_t SL_ESEC_ASN_SIG_OID_E = (-152); /* ASN signature error, mismatched oid */
dflet 0:e89ba455dbcf 143 const int16_t SL_ESEC_ASN_TIME_E = (-153); /* ASN time error, unknown time type */
dflet 0:e89ba455dbcf 144 const int16_t SL_ESEC_ASN_INPUT_E = (-154); /* ASN input error, not enough data */
dflet 0:e89ba455dbcf 145 const int16_t SL_ESEC_ASN_SIG_CONFIRM_E = (-155); /* ASN sig error, confirm failure */
dflet 0:e89ba455dbcf 146 const int16_t SL_ESEC_ASN_SIG_HASH_E = (-156); /* ASN sig error, unsupported hash type */
dflet 0:e89ba455dbcf 147 const int16_t SL_ESEC_ASN_SIG_KEY_E = (-157); /* ASN sig error, unsupported key type */
dflet 0:e89ba455dbcf 148 const int16_t SL_ESEC_ASN_DH_KEY_E = (-158); /* ASN key init error, invalid input */
dflet 0:e89ba455dbcf 149 const int16_t SL_ESEC_ASN_NTRU_KEY_E = (-159); /* ASN ntru key decode error, invalid input */
dflet 0:e89ba455dbcf 150 const int16_t SL_ESEC_ECC_BAD_ARG_E = (-170); /* ECC input argument of wrong type */
dflet 0:e89ba455dbcf 151 const int16_t SL_ESEC_ASN_ECC_KEY_E = (-171); /* ASN ECC bad input */
dflet 0:e89ba455dbcf 152 const int16_t SL_ESEC_ECC_CURVE_OID_E = (-172); /* Unsupported ECC OID curve type */
dflet 0:e89ba455dbcf 153 const int16_t SL_ESEC_BAD_FUNC_ARG = (-173); /* Bad function argument provided */
dflet 0:e89ba455dbcf 154 const int16_t SL_ESEC_NOT_COMPILED_IN = (-174); /* Feature not compiled in */
dflet 0:e89ba455dbcf 155 const int16_t SL_ESEC_UNICODE_SIZE_E = (-175); /* Unicode password too big */
dflet 0:e89ba455dbcf 156 const int16_t SL_ESEC_NO_PASSWORD = (-176); /* no password provided by user */
dflet 0:e89ba455dbcf 157 const int16_t SL_ESEC_ALT_NAME_E = (-177); /* alt name size problem, too big */
dflet 0:e89ba455dbcf 158 const int16_t SL_ESEC_AES_GCM_AUTH_E = (-180); /* AES-GCM Authentication check failure */
dflet 0:e89ba455dbcf 159 const int16_t SL_ESEC_AES_CCM_AUTH_E = (-181); /* AES-CCM Authentication check failure */
dflet 0:e89ba455dbcf 160 /* ssl tls security start with -300 offset */
dflet 0:e89ba455dbcf 161 const int16_t SL_ESEC_CLOSE_NOTIFY = (-300); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 162 const int16_t SL_ESEC_UNEXPECTED_MESSAGE = (-310); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 163 const int16_t SL_ESEC_BAD_RECORD_MAC = (-320); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 164 const int16_t SL_ESEC_DECRYPTION_FAILED = (-321); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 165 const int16_t SL_ESEC_RECORD_OVERFLOW = (-322); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 166 const int16_t SL_ESEC_DECOMPRESSION_FAILURE = (-330); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 167 const int16_t SL_ESEC_HANDSHAKE_FAILURE = (-340); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 168 const int16_t SL_ESEC_NO_CERTIFICATE = (-341); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 169 const int16_t SL_ESEC_BAD_CERTIFICATE = (-342); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 170 const int16_t SL_ESEC_UNSUPPORTED_CERTIFICATE = (-343); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 171 const int16_t SL_ESEC_CERTIFICATE_REVOKED = (-344); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 172 const int16_t SL_ESEC_CERTIFICATE_EXPIRED = (-345); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 173 const int16_t SL_ESEC_CERTIFICATE_UNKNOWN = (-346); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 174 const int16_t SL_ESEC_ILLEGAL_PARAMETER = (-347); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 175 const int16_t SL_ESEC_UNKNOWN_CA = (-348); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 176 const int16_t SL_ESEC_ACCESS_DENIED = (-349); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 177 const int16_t SL_ESEC_DECODE_ERROR = (-350); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 178 const int16_t SL_ESEC_DECRYPT_ERROR = (-351); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 179 const int16_t SL_ESEC_EXPORT_RESTRICTION = (-360); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 180 const int16_t SL_ESEC_PROTOCOL_VERSION = (-370); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 181 const int16_t SL_ESEC_INSUFFICIENT_SECURITY = (-371); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 182 const int16_t SL_ESEC_INTERNAL_ERROR = (-380); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 183 const int16_t SL_ESEC_USER_CANCELLED = (-390); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 184 const int16_t SL_ESEC_NO_RENEGOTIATION = (-400); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 185 const int16_t SL_ESEC_UNSUPPORTED_EXTENSION = (-410); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 186 const int16_t SL_ESEC_CERTIFICATE_UNOBTAINABLE = (-411); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 187 const int16_t SL_ESEC_UNRECOGNIZED_NAME = (-412); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 188 const int16_t SL_ESEC_BAD_CERTIFICATE_STATUS_RESPONSE = (-413); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 189 const int16_t SL_ESEC_BAD_CERTIFICATE_HASH_VALUE = (-414); /* ssl/tls alerts */
dflet 0:e89ba455dbcf 190 /* propierty secure */
dflet 0:e89ba455dbcf 191 const int16_t SL_ESECGENERAL = (-450); /* error secure level general error */
dflet 0:e89ba455dbcf 192 const int16_t SL_ESECDECRYPT = (-451); /* error secure level, decrypt recv packet fail */
dflet 0:e89ba455dbcf 193 const int16_t SL_ESECCLOSED = (-452); /* secure layrer is closed by other size , tcp is still connected */
dflet 0:e89ba455dbcf 194 const int16_t SL_ESECSNOVERIFY = (-453); /* Connected without server verification */
dflet 0:e89ba455dbcf 195 const int16_t SL_ESECNOCAFILE = (-454); /* error secure level CA file not found*/
dflet 0:e89ba455dbcf 196 const int16_t SL_ESECMEMORY = (-455); /* error secure level No memory space available */
dflet 0:e89ba455dbcf 197 const int16_t SL_ESECBADCAFILE = (-456); /* error secure level bad CA file */
dflet 0:e89ba455dbcf 198 const int16_t SL_ESECBADCERTFILE = (-457); /* error secure level bad Certificate file */
dflet 0:e89ba455dbcf 199 const int16_t SL_ESECBADPRIVATEFILE = (-458); /* error secure level bad private file */
dflet 0:e89ba455dbcf 200 const int16_t SL_ESECBADDHFILE = (-459); /* error secure level bad DH file */
dflet 0:e89ba455dbcf 201 const int16_t SL_ESECT00MANYSSLOPENED = (-460); /* MAX SSL Sockets are opened */
dflet 0:e89ba455dbcf 202 const int16_t SL_ESECDATEERROR = (-461); /* connected with certificate date verification error */
dflet 0:e89ba455dbcf 203 const int16_t SL_ESECHANDSHAKETIMEDOUT = (-462); /* connection timed out due to handshake time */
dflet 0:e89ba455dbcf 204
dflet 0:e89ba455dbcf 205 /* end error codes */
dflet 0:e89ba455dbcf 206
dflet 0:e89ba455dbcf 207 /* Max payload size by protocol */
dflet 0:e89ba455dbcf 208 const uint8_t SL_SOCKET_PAYLOAD_TYPE_MASK = (0xF0); /*4 bits type, 4 bits sockets id */
dflet 0:e89ba455dbcf 209 const uint8_t SL_SOCKET_PAYLOAD_TYPE_UDP_IPV4 = (0x00); /* 1472 bytes */
dflet 0:e89ba455dbcf 210 const uint8_t SL_SOCKET_PAYLOAD_TYPE_TCP_IPV4 = (0x10); /* 1460 bytes */
dflet 0:e89ba455dbcf 211 const uint8_t SL_SOCKET_PAYLOAD_TYPE_UDP_IPV6 = (0x20); /* 1452 bytes */
dflet 0:e89ba455dbcf 212 const uint8_t SL_SOCKET_PAYLOAD_TYPE_TCP_IPV6 = (0x30); /* 1440 bytes */
dflet 0:e89ba455dbcf 213 const uint8_t SL_SOCKET_PAYLOAD_TYPE_UDP_IPV4_SECURE =(0x40); /* */
dflet 0:e89ba455dbcf 214 const uint8_t SL_SOCKET_PAYLOAD_TYPE_TCP_IPV4_SECURE =(0x50); /* */
dflet 0:e89ba455dbcf 215 const uint8_t SL_SOCKET_PAYLOAD_TYPE_UDP_IPV6_SECURE =(0x60); /* */
dflet 0:e89ba455dbcf 216 const uint8_t SL_SOCKET_PAYLOAD_TYPE_TCP_IPV6_SECURE =(0x70); /* */
dflet 0:e89ba455dbcf 217 const uint8_t SL_SOCKET_PAYLOAD_TYPE_RAW_TRANCEIVER =(0x80); /* 1536 bytes */
dflet 0:e89ba455dbcf 218 const uint8_t SL_SOCKET_PAYLOAD_TYPE_RAW_PACKET = (0x90); /* 1536 bytes */
dflet 0:e89ba455dbcf 219 const uint8_t SL_SOCKET_PAYLOAD_TYPE_RAW_IP4 = (0xa0);
dflet 0:e89ba455dbcf 220 const uint8_t SL_SOCKET_PAYLOAD_TYPE_RAW_IP6 = (SL_SOCKET_PAYLOAD_TYPE_RAW_IP4 );
dflet 0:e89ba455dbcf 221
dflet 0:e89ba455dbcf 222
dflet 0:e89ba455dbcf 223
dflet 0:e89ba455dbcf 224 const uint8_t SL_SOL_SOCKET = (1); /* Define the socket option category. */
dflet 0:e89ba455dbcf 225 const uint8_t SL_IPPROTO_IP = (2); /* Define the IP option category. */
dflet 0:e89ba455dbcf 226 const uint8_t SL_SOL_PHY_OPT = (3); /* Define the PHY option category. */
dflet 0:e89ba455dbcf 227
dflet 0:e89ba455dbcf 228 const uint8_t SL_SO_RCVBUF = (8); /* Setting TCP receive buffer size */
dflet 0:e89ba455dbcf 229 const uint8_t SL_SO_KEEPALIVE = (9); /* Connections are kept alive with periodic messages */
dflet 0:e89ba455dbcf 230 const uint8_t SL_SO_RCVTIMEO = (20); /* Enable receive timeout */
dflet 0:e89ba455dbcf 231 const uint8_t SL_SO_NONBLOCKING = (24); /* Enable . disable nonblocking mode */
dflet 0:e89ba455dbcf 232 const uint8_t SL_SO_SECMETHOD = (25); /* security metohd */
dflet 0:e89ba455dbcf 233 const uint8_t SL_SO_SECURE_MASK = (26); /* security mask */
dflet 0:e89ba455dbcf 234 const uint8_t SL_SO_SECURE_FILES = (27); /* security files */
dflet 0:e89ba455dbcf 235 const uint8_t SL_SO_CHANGE_CHANNEL = (28); /* This option is available only when transceiver started */
dflet 0:e89ba455dbcf 236 const uint8_t SL_SO_SECURE_FILES_PRIVATE_KEY_FILE_NAME =(30); /* This option used to configue secure file */
dflet 0:e89ba455dbcf 237 const uint8_t SL_SO_SECURE_FILES_CERTIFICATE_FILE_NAME =(31); /* This option used to configue secure file */
dflet 0:e89ba455dbcf 238 const uint8_t SL_SO_SECURE_FILES_CA_FILE_NAME = (32); /* This option used to configue secure file */
dflet 0:e89ba455dbcf 239 const uint8_t SL_SO_SECURE_FILES_DH_KEY_FILE_NAME = (33); /* This option used to configue secure file */
dflet 0:e89ba455dbcf 240
dflet 0:e89ba455dbcf 241 const uint8_t SL_IP_MULTICAST_IF = (60); /* Specify outgoing multicast interface */
dflet 0:e89ba455dbcf 242 const uint8_t SL_IP_MULTICAST_TTL = (61); /* Specify the TTL value to use for outgoing multicast packet. */
dflet 0:e89ba455dbcf 243 const uint8_t SL_IP_ADD_MEMBERSHIP = (65); /* Join IPv4 multicast membership */
dflet 0:e89ba455dbcf 244 const uint8_t SL_IP_DROP_MEMBERSHIP= (66); /* Leave IPv4 multicast membership */
dflet 0:e89ba455dbcf 245 const uint8_t SL_IP_HDRINCL = (67); /* Raw socket IPv4 header included. */
dflet 0:e89ba455dbcf 246 const uint8_t SL_IP_RAW_RX_NO_HEADER =(68); /* Proprietary socket option that does not includeIPv4/IPv6 header (and extension headers) on received raw sockets*/
dflet 0:e89ba455dbcf 247 const uint8_t SL_IP_RAW_IPV6_HDRINCL =(69); /* Transmitted buffer over IPv6 socket contains IPv6 header. */
dflet 0:e89ba455dbcf 248
dflet 0:e89ba455dbcf 249 const uint8_t SL_SO_PHY_RATE = (100); /* WLAN Transmit rate */
dflet 0:e89ba455dbcf 250 const uint8_t SL_SO_PHY_TX_POWER = (101); /* TX Power level */
dflet 0:e89ba455dbcf 251 const uint8_t SL_SO_PHY_NUM_FRAMES_TO_TX = (102); /* Number of frames to transmit */
dflet 0:e89ba455dbcf 252 const uint8_t SL_SO_PHY_PREAMBLE = (103); /* Preamble for transmission */
dflet 0:e89ba455dbcf 253
dflet 0:e89ba455dbcf 254 const uint8_t SL_SO_SEC_METHOD_SSLV3 = (0); /* security metohd SSL v3*/
dflet 0:e89ba455dbcf 255 const uint8_t SL_SO_SEC_METHOD_TLSV1 = (1); /* security metohd TLS v1*/
dflet 0:e89ba455dbcf 256 const uint8_t SL_SO_SEC_METHOD_TLSV1_1 = (2); /* security metohd TLS v1_1*/
dflet 0:e89ba455dbcf 257 const uint8_t SL_SO_SEC_METHOD_TLSV1_2 = (3); /* security metohd TLS v1_2*/
dflet 0:e89ba455dbcf 258 const uint8_t SL_SO_SEC_METHOD_SSLv3_TLSV1_2 = (4); /* use highest possible version from SSLv3 - TLS 1.2*/
dflet 0:e89ba455dbcf 259 const uint8_t SL_SO_SEC_METHOD_DLSV1 = (5); /* security metohd DTL v1 */
dflet 0:e89ba455dbcf 260
dflet 0:e89ba455dbcf 261 #define SL_SEC_MASK_SSL_RSA_WITH_RC4_128_SHA (1 << 0)
dflet 0:e89ba455dbcf 262 #define SL_SEC_MASK_SSL_RSA_WITH_RC4_128_MD5 (1 << 1)
dflet 0:e89ba455dbcf 263 #define SL_SEC_MASK_TLS_RSA_WITH_AES_256_CBC_SHA (1 << 2)
dflet 0:e89ba455dbcf 264 #define SL_SEC_MASK_TLS_DHE_RSA_WITH_AES_256_CBC_SHA (1 << 3)
dflet 0:e89ba455dbcf 265 #define SL_SEC_MASK_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA (1 << 4)
dflet 0:e89ba455dbcf 266 #define SL_SEC_MASK_TLS_ECDHE_RSA_WITH_RC4_128_SHA (1 << 5)
dflet 0:e89ba455dbcf 267 #define SL_SEC_MASK_SECURE_DEFAULT ((SL_SEC_MASK_TLS_ECDHE_RSA_WITH_RC4_128_SHA << 1) - 1) /*Is this var name correct? was SEC_MASK_TLS_ECDHE_RSA_WITH_RC4_128_SHA*/
dflet 0:e89ba455dbcf 268
dflet 0:e89ba455dbcf 269 const uint32_t SL_MSG_DONTWAIT = (0x00000008); /* Nonblocking IO */
dflet 0:e89ba455dbcf 270
dflet 0:e89ba455dbcf 271 /* AP DHCP Server - IP Release reason code */
dflet 0:e89ba455dbcf 272 const uint8_t SL_IP_LEASE_PEER_RELEASE = (0);
dflet 0:e89ba455dbcf 273 const uint8_t SL_IP_LEASE_PEER_DECLINE = (1);
dflet 0:e89ba455dbcf 274 const uint8_t SL_IP_LEASE_EXPIRED = (2);
dflet 0:e89ba455dbcf 275
dflet 0:e89ba455dbcf 276 /* possible types when receiving SL_SOCKET_ASYNC_EVENT*/
dflet 0:e89ba455dbcf 277 const uint8_t SSL_ACCEPT = (1); /* accept failed due to ssl issue ( tcp pass) */
dflet 0:e89ba455dbcf 278 const uint8_t RX_FRAGMENTATION_TOO_BIG = (2); /* connection less mode, rx packet fragmentation > 16K, packet is being released */
dflet 0:e89ba455dbcf 279 const uint8_t OTHER_SIDE_CLOSE_SSL_DATA_NOT_ENCRYPTED = (3); /* remote side down from secure to unsecure */
dflet 0:e89ba455dbcf 280
dflet 0:e89ba455dbcf 281
dflet 0:e89ba455dbcf 282
dflet 0:e89ba455dbcf 283 #ifdef SL_INC_STD_BSD_API_NAMING
dflet 0:e89ba455dbcf 284
dflet 0:e89ba455dbcf 285 #define FD_SETSIZE SL_FD_SETSIZE
dflet 0:e89ba455dbcf 286
dflet 0:e89ba455dbcf 287 #define SOCK_STREAM SL_SOCK_STREAM
dflet 0:e89ba455dbcf 288 #define SOCK_DGRAM SL_SOCK_DGRAM
dflet 0:e89ba455dbcf 289 #define SOCK_RAW SL_SOCK_RAW
dflet 0:e89ba455dbcf 290 #define IPPROTO_TCP SL_IPPROTO_TCP
dflet 0:e89ba455dbcf 291 #define IPPROTO_UDP SL_IPPROTO_UDP
dflet 0:e89ba455dbcf 292 #define IPPROTO_RAW SL_IPPROTO_RAW
dflet 0:e89ba455dbcf 293
dflet 0:e89ba455dbcf 294 #define AF_INET6_EUI_48 SL_AF_INET6_EUI_48
dflet 0:e89ba455dbcf 295 #define AF_RF SL_AF_RF
dflet 0:e89ba455dbcf 296 #define AF_PACKET SL_AF_PACKET
dflet 0:e89ba455dbcf 297
dflet 0:e89ba455dbcf 298 #define PF_INET SL_PF_INET
dflet 0:e89ba455dbcf 299 #define PF_INET6 SL_PF_INET6
dflet 0:e89ba455dbcf 300
dflet 0:e89ba455dbcf 301 #define INADDR_ANY SL_INADDR_ANY
dflet 0:e89ba455dbcf 302 #define ERROR SL_SOC_ERROR
dflet 0:e89ba455dbcf 303 #define INEXE SL_INEXE
dflet 0:e89ba455dbcf 304 #define EBADF SL_EBADF
dflet 0:e89ba455dbcf 305 #define ENSOCK SL_ENSOCK
dflet 0:e89ba455dbcf 306 #define EAGAIN SL_EAGAIN
dflet 0:e89ba455dbcf 307 #define EWOULDBLOCK SL_EWOULDBLOCK
dflet 0:e89ba455dbcf 308 #define ENOMEM SL_ENOMEM
dflet 0:e89ba455dbcf 309 #define EACCES SL_EACCES
dflet 0:e89ba455dbcf 310 #define EFAULT SL_EFAULT
dflet 0:e89ba455dbcf 311 #define EINVAL SL_EINVAL
dflet 0:e89ba455dbcf 312 #define EDESTADDRREQ SL_EDESTADDRREQ
dflet 0:e89ba455dbcf 313 #define EPROTOTYPE SL_EPROTOTYPE
dflet 0:e89ba455dbcf 314 #define ENOPROTOOPT SL_ENOPROTOOPT
dflet 0:e89ba455dbcf 315 #define EPROTONOSUPPORT SL_EPROTONOSUPPORT
dflet 0:e89ba455dbcf 316 #define ESOCKTNOSUPPORT SL_ESOCKTNOSUPPORT
dflet 0:e89ba455dbcf 317 #define EOPNOTSUPP SL_EOPNOTSUPP
dflet 0:e89ba455dbcf 318 #define EAFNOSUPPORT SL_EAFNOSUPPORT
dflet 0:e89ba455dbcf 319 #define EADDRINUSE SL_EADDRINUSE
dflet 0:e89ba455dbcf 320 #define EADDRNOTAVAIL SL_EADDRNOTAVAIL
dflet 0:e89ba455dbcf 321 #define ENETUNREACH SL_ENETUNREACH
dflet 0:e89ba455dbcf 322 #define ENOBUFS SL_ENOBUFS
dflet 0:e89ba455dbcf 323 #define EOBUFF SL_EOBUFF
dflet 0:e89ba455dbcf 324 #define EISCONN SL_EISCONN
dflet 0:e89ba455dbcf 325 #define ENOTCONN SL_ENOTCONN
dflet 0:e89ba455dbcf 326 #define ETIMEDOUT SL_ETIMEDOUT
dflet 0:e89ba455dbcf 327 #define ECONNREFUSED SL_ECONNREFUSED
dflet 0:e89ba455dbcf 328
dflet 0:e89ba455dbcf 329 #define SOL_SOCKET SL_SOL_SOCKET
dflet 0:e89ba455dbcf 330 #define IPPROTO_IP SL_IPPROTO_IP
dflet 0:e89ba455dbcf 331 #define SO_KEEPALIVE SL_SO_KEEPALIVE
dflet 0:e89ba455dbcf 332
dflet 0:e89ba455dbcf 333 #define SO_RCVTIMEO SL_SO_RCVTIMEO
dflet 0:e89ba455dbcf 334 #define SO_NONBLOCKING SL_SO_NONBLOCKING
dflet 0:e89ba455dbcf 335
dflet 0:e89ba455dbcf 336 #define IP_MULTICAST_IF SL_IP_MULTICAST_IF
dflet 0:e89ba455dbcf 337 #define IP_MULTICAST_TTL SL_IP_MULTICAST_TTL
dflet 0:e89ba455dbcf 338 #define IP_ADD_MEMBERSHIP SL_IP_ADD_MEMBERSHIP
dflet 0:e89ba455dbcf 339 #define IP_DROP_MEMBERSHIP SL_IP_DROP_MEMBERSHIP
dflet 0:e89ba455dbcf 340
dflet 0:e89ba455dbcf 341 #define socklen_t SlSocklen_t
dflet 0:e89ba455dbcf 342 #define timeval SlTimeval_t
dflet 0:e89ba455dbcf 343 #define sockaddr SlSockAddr_t
dflet 0:e89ba455dbcf 344 #define in6_addr SlIn6Addr_t
dflet 0:e89ba455dbcf 345 #define sockaddr_in6 SlSockAddrIn6_t
dflet 0:e89ba455dbcf 346 #define in_addr SlInAddr_t
dflet 0:e89ba455dbcf 347 #define sockaddr_in SlSockAddrIn_t
dflet 0:e89ba455dbcf 348
dflet 0:e89ba455dbcf 349 #define MSG_DONTWAIT SL_MSG_DONTWAIT
dflet 0:e89ba455dbcf 350
dflet 0:e89ba455dbcf 351 #define FD_SET SL_FD_SET
dflet 0:e89ba455dbcf 352 #define FD_CLR SL_FD_CLR
dflet 0:e89ba455dbcf 353 #define FD_ISSET SL_FD_ISSET
dflet 0:e89ba455dbcf 354 #define FD_ZERO SL_FD_ZERO
dflet 0:e89ba455dbcf 355 #define fd_set SlFdSet_t
dflet 0:e89ba455dbcf 356
dflet 0:e89ba455dbcf 357 #define socket sl_Socket
dflet 0:e89ba455dbcf 358 #define close sl_Close
dflet 0:e89ba455dbcf 359 #define accept sl_Accept
dflet 0:e89ba455dbcf 360 #define bind sl_Bind
dflet 0:e89ba455dbcf 361 #define listen sl_Listen
dflet 0:e89ba455dbcf 362 #define connect sl_Connect
dflet 0:e89ba455dbcf 363 #define select sl_Select
dflet 0:e89ba455dbcf 364 #define setsockopt sl_SetSockOpt
dflet 0:e89ba455dbcf 365 #define getsockopt sl_GetSockOpt
dflet 0:e89ba455dbcf 366 #define recv sl_Recv
dflet 0:e89ba455dbcf 367 #define recvfrom sl_RecvFrom
dflet 0:e89ba455dbcf 368 #define write_ sl_Write
dflet 0:e89ba455dbcf 369 #define send sl_Send
dflet 0:e89ba455dbcf 370 #define sendto sl_SendTo
dflet 0:e89ba455dbcf 371 #define gethostbyname sl_NetAppDnsGetHostByName
dflet 0:e89ba455dbcf 372 #define htonl sl_Htonl
dflet 0:e89ba455dbcf 373 #define ntohl sl_Ntohl
dflet 0:e89ba455dbcf 374 #define htons sl_Htons
dflet 0:e89ba455dbcf 375 #define ntohs sl_Ntohs
dflet 0:e89ba455dbcf 376 #endif
dflet 0:e89ba455dbcf 377
dflet 0:e89ba455dbcf 378
dflet 0:e89ba455dbcf 379 /*****************************************************************************/
dflet 0:e89ba455dbcf 380 /* Structure/Enum declarations */
dflet 0:e89ba455dbcf 381 /*****************************************************************************/
dflet 0:e89ba455dbcf 382
dflet 0:e89ba455dbcf 383 /* Internet address */
dflet 0:e89ba455dbcf 384 typedef struct SlInAddr_t {
dflet 0:e89ba455dbcf 385 #ifndef s_addr
dflet 0:e89ba455dbcf 386 uint32_t s_addr; /* Internet address 32 bits */
dflet 0:e89ba455dbcf 387 #else
dflet 0:e89ba455dbcf 388 union S_un {
dflet 0:e89ba455dbcf 389 struct {
dflet 0:e89ba455dbcf 390 uint8_t s_b1,s_b2,s_b3,s_b4;
dflet 0:e89ba455dbcf 391 } S_un_b;
dflet 0:e89ba455dbcf 392 struct {
dflet 0:e89ba455dbcf 393 uint8_t s_w1,s_w2;
dflet 0:e89ba455dbcf 394 } S_un_w;
dflet 0:e89ba455dbcf 395 uint32_t S_addr;
dflet 0:e89ba455dbcf 396 } S_un;
dflet 0:e89ba455dbcf 397 #endif
dflet 0:e89ba455dbcf 398 } SlInAddr_t;
dflet 0:e89ba455dbcf 399
dflet 0:e89ba455dbcf 400
dflet 0:e89ba455dbcf 401 /* sockopt */
dflet 0:e89ba455dbcf 402 typedef struct {
dflet 0:e89ba455dbcf 403 uint32_t KeepaliveEnabled; /* 0 = disabled;1 = enabled; default = 1*/
dflet 0:e89ba455dbcf 404 } SlSockKeepalive_t;
dflet 0:e89ba455dbcf 405
dflet 0:e89ba455dbcf 406 typedef struct {
dflet 0:e89ba455dbcf 407 uint32_t ReuseaddrEnabled; /* 0 = disabled; 1 = enabled; default = 1*/
dflet 0:e89ba455dbcf 408 } SlSockReuseaddr_t;
dflet 0:e89ba455dbcf 409
dflet 0:e89ba455dbcf 410 typedef struct {
dflet 0:e89ba455dbcf 411 uint32_t Winsize; /* receive window size for tcp sockets */
dflet 0:e89ba455dbcf 412 } SlSockWinsize_t;
dflet 0:e89ba455dbcf 413
dflet 0:e89ba455dbcf 414 typedef struct {
dflet 0:e89ba455dbcf 415 uint32_t NonblockingEnabled;/* 0 = disabled;1 = enabled;default = 1*/
dflet 0:e89ba455dbcf 416 } SlSockNonblocking_t;
dflet 0:e89ba455dbcf 417
dflet 0:e89ba455dbcf 418 typedef struct {
dflet 0:e89ba455dbcf 419 uint8_t sd;
dflet 0:e89ba455dbcf 420 uint8_t type;
dflet 0:e89ba455dbcf 421 uint16_t val;
dflet 0:e89ba455dbcf 422 } SlSocketAsyncEvent_t;
dflet 0:e89ba455dbcf 423
dflet 0:e89ba455dbcf 424 typedef struct {
dflet 0:e89ba455dbcf 425 int16_t status;
dflet 0:e89ba455dbcf 426 uint16_t sd;
dflet 0:e89ba455dbcf 427 SlSocketAsyncEvent_t socketAsyncEvent;
dflet 0:e89ba455dbcf 428 } SlSockEventData_t;
dflet 0:e89ba455dbcf 429
dflet 0:e89ba455dbcf 430
dflet 0:e89ba455dbcf 431 typedef struct {
dflet 0:e89ba455dbcf 432 uint32_t Event;
dflet 0:e89ba455dbcf 433 SlSockEventData_t EventData;
dflet 0:e89ba455dbcf 434 } SlSockEvent_t;
dflet 0:e89ba455dbcf 435
dflet 0:e89ba455dbcf 436
dflet 0:e89ba455dbcf 437 typedef struct {
dflet 0:e89ba455dbcf 438 uint32_t secureMask;
dflet 0:e89ba455dbcf 439 } SlSockSecureMask;
dflet 0:e89ba455dbcf 440
dflet 0:e89ba455dbcf 441 typedef struct {
dflet 0:e89ba455dbcf 442 uint8_t secureMethod;
dflet 0:e89ba455dbcf 443 } SlSockSecureMethod;
dflet 0:e89ba455dbcf 444
dflet 0:e89ba455dbcf 445 typedef enum {
dflet 0:e89ba455dbcf 446 SL_BSD_SECURED_PRIVATE_KEY_IDX = 0,
dflet 0:e89ba455dbcf 447 SL_BSD_SECURED_CERTIFICATE_IDX,
dflet 0:e89ba455dbcf 448 SL_BSD_SECURED_CA_IDX,
dflet 0:e89ba455dbcf 449 SL_BSD_SECURED_DH_IDX
dflet 0:e89ba455dbcf 450 } slBsd_secureSocketFilesIndex_e;
dflet 0:e89ba455dbcf 451
dflet 0:e89ba455dbcf 452 typedef struct {
dflet 0:e89ba455dbcf 453 SlInAddr_t imr_multiaddr; /* The IPv4 multicast address to join */
dflet 0:e89ba455dbcf 454 SlInAddr_t imr_interface; /* The interface to use for this group */
dflet 0:e89ba455dbcf 455 } SlSockIpMreq;
dflet 0:e89ba455dbcf 456
dflet 0:e89ba455dbcf 457
dflet 0:e89ba455dbcf 458 /* sockopt */
dflet 0:e89ba455dbcf 459 typedef uint32_t SlTime_t;
dflet 0:e89ba455dbcf 460 typedef uint32_t SlSuseconds_t;
dflet 0:e89ba455dbcf 461
dflet 0:e89ba455dbcf 462 typedef struct {
dflet 0:e89ba455dbcf 463 SlTime_t tv_sec; /* Seconds */
dflet 0:e89ba455dbcf 464 SlSuseconds_t tv_usec; /* Microseconds */
dflet 0:e89ba455dbcf 465 } SlTimeval_t;
dflet 0:e89ba455dbcf 466
dflet 0:e89ba455dbcf 467 typedef uint16_t SlSocklen_t;
dflet 0:e89ba455dbcf 468
dflet 0:e89ba455dbcf 469 /* IpV4 socket address */
dflet 0:e89ba455dbcf 470 typedef struct {
dflet 0:e89ba455dbcf 471 uint16_t sa_family; /* Address family (e.g. , AF_INET) */
dflet 0:e89ba455dbcf 472 uint8_t sa_data[14]; /* Protocol- specific address information*/
dflet 0:e89ba455dbcf 473 } SlSockAddr_t;
dflet 0:e89ba455dbcf 474
dflet 0:e89ba455dbcf 475
dflet 0:e89ba455dbcf 476 /* IpV6 or Ipv6 EUI64 */
dflet 0:e89ba455dbcf 477 typedef struct {
dflet 0:e89ba455dbcf 478 union {
dflet 0:e89ba455dbcf 479 uint8_t _S6_u8[16];
dflet 0:e89ba455dbcf 480 uint32_t _S6_u32[4];
dflet 0:e89ba455dbcf 481 } _S6_un;
dflet 0:e89ba455dbcf 482 } SlIn6Addr_t;
dflet 0:e89ba455dbcf 483
dflet 0:e89ba455dbcf 484 typedef struct {
dflet 0:e89ba455dbcf 485 uint16_t sin6_family; /* AF_INET6 || AF_INET6_EUI_48*/
dflet 0:e89ba455dbcf 486 uint16_t sin6_port; /* Transport layer port. */
dflet 0:e89ba455dbcf 487 uint32_t sin6_flowinfo; /* IPv6 flow information. */
dflet 0:e89ba455dbcf 488 SlIn6Addr_t sin6_addr; /* IPv6 address. */
dflet 0:e89ba455dbcf 489 uint32_t sin6_scope_id; /* set of interfaces for a scope. */
dflet 0:e89ba455dbcf 490 } SlSockAddrIn6_t;
dflet 0:e89ba455dbcf 491
dflet 0:e89ba455dbcf 492 /* Socket address, Internet style. */
dflet 0:e89ba455dbcf 493
dflet 0:e89ba455dbcf 494 typedef struct {
dflet 0:e89ba455dbcf 495 uint16_t sin_family; /* Internet Protocol (AF_INET). */
dflet 0:e89ba455dbcf 496 uint16_t sin_port; /* Address port (16 bits). */
dflet 0:e89ba455dbcf 497 SlInAddr_t sin_addr; /* Internet address (32 bits). */
dflet 0:e89ba455dbcf 498 int8_t sin_zero[8]; /* Not used. */
dflet 0:e89ba455dbcf 499 } SlSockAddrIn_t;
dflet 0:e89ba455dbcf 500
dflet 0:e89ba455dbcf 501 typedef struct {
dflet 0:e89ba455dbcf 502 uint32_t ip;
dflet 0:e89ba455dbcf 503 uint32_t gateway;
dflet 0:e89ba455dbcf 504 uint32_t dns;
dflet 0:e89ba455dbcf 505 } SlIpV4AcquiredAsync_t;
dflet 0:e89ba455dbcf 506
dflet 0:e89ba455dbcf 507 typedef struct {
dflet 0:e89ba455dbcf 508 uint32_t type;
dflet 0:e89ba455dbcf 509 uint32_t ip[4];
dflet 0:e89ba455dbcf 510 uint32_t gateway[4];
dflet 0:e89ba455dbcf 511 uint32_t dns[4];
dflet 0:e89ba455dbcf 512 } SlIpV6AcquiredAsync_t;
dflet 0:e89ba455dbcf 513
dflet 0:e89ba455dbcf 514 typedef struct {
dflet 0:e89ba455dbcf 515 uint32_t ip_address;
dflet 0:e89ba455dbcf 516 uint32_t lease_time;
dflet 0:e89ba455dbcf 517 uint8_t mac[6];
dflet 0:e89ba455dbcf 518 uint16_t padding;
dflet 0:e89ba455dbcf 519 } SlIpLeasedAsync_t;
dflet 0:e89ba455dbcf 520
dflet 0:e89ba455dbcf 521 typedef struct {
dflet 0:e89ba455dbcf 522 uint32_t ip_address;
dflet 0:e89ba455dbcf 523 uint8_t mac[6];
dflet 0:e89ba455dbcf 524 uint16_t reason;
dflet 0:e89ba455dbcf 525 } SlIpReleasedAsync_t;
dflet 0:e89ba455dbcf 526
dflet 0:e89ba455dbcf 527
dflet 0:e89ba455dbcf 528 typedef union {
dflet 0:e89ba455dbcf 529 SlIpV4AcquiredAsync_t ipAcquiredV4; /*SL_NETAPP_IPV4_IPACQUIRED_EVENT*/
dflet 0:e89ba455dbcf 530 SlIpV6AcquiredAsync_t ipAcquiredV6; /*SL_NETAPP_IPV6_IPACQUIRED_EVENT*/
dflet 0:e89ba455dbcf 531 uint32_t sd; /*SL_SOCKET_TX_FAILED_EVENT*/
dflet 0:e89ba455dbcf 532 SlIpLeasedAsync_t ipLeased; /* SL_NETAPP_IP_LEASED_EVENT */
dflet 0:e89ba455dbcf 533 SlIpReleasedAsync_t ipReleased; /* SL_NETAPP_IP_RELEASED_EVENT */
dflet 0:e89ba455dbcf 534 } SlNetAppEventData_u;
dflet 0:e89ba455dbcf 535
dflet 0:e89ba455dbcf 536 typedef struct {
dflet 0:e89ba455dbcf 537 uint32_t Event;
dflet 0:e89ba455dbcf 538 SlNetAppEventData_u EventData;
dflet 0:e89ba455dbcf 539 } SlNetAppEvent_t;
dflet 0:e89ba455dbcf 540
dflet 0:e89ba455dbcf 541
dflet 0:e89ba455dbcf 542 typedef struct sock_secureFiles {
dflet 0:e89ba455dbcf 543 uint8_t secureFiles[4];
dflet 0:e89ba455dbcf 544 } SlSockSecureFiles_t;
dflet 0:e89ba455dbcf 545
dflet 0:e89ba455dbcf 546
dflet 0:e89ba455dbcf 547 typedef struct SlFdSet_t { /* The select socket array manager */
dflet 0:e89ba455dbcf 548 uint32_t fd_array[(SL_FD_SETSIZE + 31)/32]; /* Bit map of SOCKET Descriptors */
dflet 0:e89ba455dbcf 549 } SlFdSet_t;
dflet 0:e89ba455dbcf 550
dflet 0:e89ba455dbcf 551 typedef struct {
dflet 0:e89ba455dbcf 552 uint8_t rate; /* Recevied Rate */
dflet 0:e89ba455dbcf 553 uint8_t channel; /* The received channel*/
dflet 0:e89ba455dbcf 554 int8_t rssi; /* The computed RSSI value in db of current frame */
dflet 0:e89ba455dbcf 555 uint8_t padding; /* pad to align to 32 bits */
dflet 0:e89ba455dbcf 556 uint32_t timestamp; /* Timestamp in microseconds, */
dflet 0:e89ba455dbcf 557 } SlTransceiverRxOverHead_t;
dflet 0:e89ba455dbcf 558
dflet 0:e89ba455dbcf 559 class cc3100_nonos;
dflet 0:e89ba455dbcf 560
dflet 0:e89ba455dbcf 561 class cc3100_socket
dflet 0:e89ba455dbcf 562 {
dflet 0:e89ba455dbcf 563
dflet 0:e89ba455dbcf 564 public:
dflet 0:e89ba455dbcf 565
dflet 0:e89ba455dbcf 566 cc3100_socket(cc3100_driver &driver, cc3100_nonos &nonos);
dflet 0:e89ba455dbcf 567
dflet 0:e89ba455dbcf 568 ~cc3100_socket();
dflet 0:e89ba455dbcf 569
dflet 0:e89ba455dbcf 570 /*******************************************************************************/
dflet 0:e89ba455dbcf 571 /* Functions prototypes */
dflet 0:e89ba455dbcf 572 /*******************************************************************************/
dflet 0:e89ba455dbcf 573 void _sl_BuildAddress(const SlSockAddr_t *addr, int16_t addrlen, _SocketAddrCommand_u *pCmd);
dflet 0:e89ba455dbcf 574 void _sl_ParseAddress(_SocketAddrResponse_u *pRsp, SlSockAddr_t *addr, SlSocklen_t *addrlen);
dflet 0:e89ba455dbcf 575 uint16_t _sl_TruncatePayloadByProtocol(const int16_t pSd,const uint16_t length);
dflet 0:e89ba455dbcf 576
dflet 0:e89ba455dbcf 577 /*****************************************************************************/
dflet 0:e89ba455dbcf 578 /* Function prototypes */
dflet 0:e89ba455dbcf 579 /*****************************************************************************/
dflet 0:e89ba455dbcf 580
dflet 0:e89ba455dbcf 581 /*!
dflet 0:e89ba455dbcf 582
dflet 0:e89ba455dbcf 583 \brief create an endpoint for communication
dflet 0:e89ba455dbcf 584
dflet 0:e89ba455dbcf 585 The socket function creates a new socket of a certain socket type, identified
dflet 0:e89ba455dbcf 586 by an integer number, and allocates system resources to it.
dflet 0:e89ba455dbcf 587 This function is called by the application layer to obtain a socket handle.
dflet 0:e89ba455dbcf 588
dflet 0:e89ba455dbcf 589 \param[in] domain specifies the protocol family of the created socket.
dflet 0:e89ba455dbcf 590 For example:
dflet 0:e89ba455dbcf 591 AF_INET for network protocol IPv4
dflet 0:e89ba455dbcf 592 AF_RF for starting transceiver mode. Notes:
dflet 0:e89ba455dbcf 593 - sending and receiving any packet overriding 802.11 header
dflet 0:e89ba455dbcf 594 - for optimized power consumption the socket will be started in TX
dflet 0:e89ba455dbcf 595 only mode until receive command is activated
dflet 0:e89ba455dbcf 596 AF_INET6 for IPv6
dflet 0:e89ba455dbcf 597
dflet 0:e89ba455dbcf 598
dflet 0:e89ba455dbcf 599 \param[in] type specifies the communication semantic, one of:
dflet 0:e89ba455dbcf 600 SOCK_STREAM (reliable stream-oriented service or Stream Sockets)
dflet 0:e89ba455dbcf 601 SOCK_DGRAM (datagram service or Datagram Sockets)
dflet 0:e89ba455dbcf 602 SOCK_RAW (raw protocols atop the network layer)
dflet 0:e89ba455dbcf 603 when used with AF_RF:
dflet 0:e89ba455dbcf 604 SOCK_DGRAM - L2 socket
dflet 0:e89ba455dbcf 605 SOCK_RAW - L1 socket - bypass WLAN CCA (Clear Channel Assessment)
dflet 0:e89ba455dbcf 606
dflet 0:e89ba455dbcf 607 \param[in] protocol specifies a particular transport to be used with
dflet 0:e89ba455dbcf 608 the socket.
dflet 0:e89ba455dbcf 609 The most common are IPPROTO_TCP, IPPROTO_SCTP, IPPROTO_UDP,
dflet 0:e89ba455dbcf 610 IPPROTO_DCCP.
dflet 0:e89ba455dbcf 611 The value 0 may be used to select a default
dflet 0:e89ba455dbcf 612 protocol from the selected domain and type
dflet 0:e89ba455dbcf 613
dflet 0:e89ba455dbcf 614
dflet 0:e89ba455dbcf 615 \return On success, socket handle that is used for consequent socket operations.
dflet 0:e89ba455dbcf 616 A successful return code should be a positive number (int16)
dflet 0:e89ba455dbcf 617 On error, a negative (int16) value will be returned specifying the error code.
dflet 0:e89ba455dbcf 618 SL_EAFNOSUPPORT - illegal domain parameter
dflet 0:e89ba455dbcf 619 SL_EPROTOTYPE - illegal type parameter
dflet 0:e89ba455dbcf 620 SL_EACCES - permission denied
dflet 0:e89ba455dbcf 621 SL_ENSOCK - exceeded maximal number of socket
dflet 0:e89ba455dbcf 622 SL_ENOMEM - memory allocation error
dflet 0:e89ba455dbcf 623 SL_EINVAL - error in socket configuration
dflet 0:e89ba455dbcf 624 SL_EPROTONOSUPPORT - illegal protocol parameter
dflet 0:e89ba455dbcf 625 SL_EOPNOTSUPP - illegal combination of protocol and type parameters
dflet 0:e89ba455dbcf 626
dflet 0:e89ba455dbcf 627
dflet 0:e89ba455dbcf 628 \sa sl_Close
dflet 0:e89ba455dbcf 629 \note belongs to \ref basic_api
dflet 0:e89ba455dbcf 630 \warning
dflet 0:e89ba455dbcf 631 */
dflet 0:e89ba455dbcf 632 #if _SL_INCLUDE_FUNC(sl_Socket)
dflet 0:e89ba455dbcf 633 int16_t sl_Socket(int16_t Domain, int16_t Type, int16_t Protocol);
dflet 0:e89ba455dbcf 634 #endif
dflet 0:e89ba455dbcf 635
dflet 0:e89ba455dbcf 636 /*!
dflet 0:e89ba455dbcf 637 \brief gracefully close socket
dflet 0:e89ba455dbcf 638
dflet 0:e89ba455dbcf 639 This function causes the system to release resources allocated to a socket. \n
dflet 0:e89ba455dbcf 640 In case of TCP, the connection is terminated.
dflet 0:e89ba455dbcf 641
dflet 0:e89ba455dbcf 642 \param[in] sd socket handle (received in sl_Socket)
dflet 0:e89ba455dbcf 643
dflet 0:e89ba455dbcf 644 \return On success, zero is returned.
dflet 0:e89ba455dbcf 645 On error, a negative number is returned.
dflet 0:e89ba455dbcf 646
dflet 0:e89ba455dbcf 647 \sa sl_Socket
dflet 0:e89ba455dbcf 648 \note belongs to \ref ext_api
dflet 0:e89ba455dbcf 649 \warning
dflet 0:e89ba455dbcf 650 */
dflet 0:e89ba455dbcf 651 #if _SL_INCLUDE_FUNC(sl_Close)
dflet 0:e89ba455dbcf 652 int16_t sl_Close(int16_t sd);
dflet 0:e89ba455dbcf 653 #endif
dflet 0:e89ba455dbcf 654
dflet 0:e89ba455dbcf 655 /*!
dflet 0:e89ba455dbcf 656 \brief Accept a connection on a socket
dflet 0:e89ba455dbcf 657
dflet 0:e89ba455dbcf 658 This function is used with connection-based socket types (SOCK_STREAM).
dflet 0:e89ba455dbcf 659 It extracts the first connection request on the queue of pending
dflet 0:e89ba455dbcf 660 connections, creates a new connected socket, and returns a new file
dflet 0:e89ba455dbcf 661 descriptor referring to that socket.
dflet 0:e89ba455dbcf 662 The newly created socket is not in the listening state. The
dflet 0:e89ba455dbcf 663 original socket sd is unaffected by this call.
dflet 0:e89ba455dbcf 664 The argument sd is a socket that has been created with
dflet 0:e89ba455dbcf 665 sl_Socket(), bound to a local address with sl_Bind(), and is
dflet 0:e89ba455dbcf 666 listening for connections after a sl_Listen(). The argument \b
dflet 0:e89ba455dbcf 667 \e addr is a pointer to a sockaddr structure. This structure
dflet 0:e89ba455dbcf 668 is filled in with the address of the peer socket, as known to
dflet 0:e89ba455dbcf 669 the communications layer. The exact format of the address
dflet 0:e89ba455dbcf 670 returned addr is determined by the socket's address family.
dflet 0:e89ba455dbcf 671 The \b \e addrlen argument is a value-result argument: it
dflet 0:e89ba455dbcf 672 should initially contain the size of the structure pointed to
dflet 0:e89ba455dbcf 673 by addr, on return it will contain the actual length (in
dflet 0:e89ba455dbcf 674 bytes) of the address returned.
dflet 0:e89ba455dbcf 675
dflet 0:e89ba455dbcf 676 \param[in] sd socket descriptor (handle)
dflet 0:e89ba455dbcf 677 \param[out] addr the argument addr is a pointer
dflet 0:e89ba455dbcf 678 to a sockaddr structure. This
dflet 0:e89ba455dbcf 679 structure is filled in with the
dflet 0:e89ba455dbcf 680 address of the peer socket, as
dflet 0:e89ba455dbcf 681 known to the communications
dflet 0:e89ba455dbcf 682 layer. The exact format of the
dflet 0:e89ba455dbcf 683 address returned addr is
dflet 0:e89ba455dbcf 684 determined by the socket's
dflet 0:e89ba455dbcf 685 address\n
dflet 0:e89ba455dbcf 686 sockaddr:\n - code for the
dflet 0:e89ba455dbcf 687 address format. On this version
dflet 0:e89ba455dbcf 688 only AF_INET is supported.\n -
dflet 0:e89ba455dbcf 689 socket address, the length
dflet 0:e89ba455dbcf 690 depends on the code format
dflet 0:e89ba455dbcf 691 \param[out] addrlen the addrlen argument is a value-result
dflet 0:e89ba455dbcf 692 argument: it should initially contain the
dflet 0:e89ba455dbcf 693 size of the structure pointed to by addr
dflet 0:e89ba455dbcf 694
dflet 0:e89ba455dbcf 695 \return On success, a socket handle.
dflet 0:e89ba455dbcf 696 On a non-blocking accept a possible negative value is SL_EAGAIN.
dflet 0:e89ba455dbcf 697 On failure, negative value.
dflet 0:e89ba455dbcf 698 SL_POOL_IS_EMPTY may be return in case there are no resources in the system
dflet 0:e89ba455dbcf 699 In this case try again later or increase MAX_CONCURRENT_ACTIONS
dflet 0:e89ba455dbcf 700
dflet 0:e89ba455dbcf 701 \sa sl_Socket sl_Bind sl_Listen
dflet 0:e89ba455dbcf 702 \note belongs to \ref server_side
dflet 0:e89ba455dbcf 703 \warning
dflet 0:e89ba455dbcf 704 */
dflet 0:e89ba455dbcf 705 #if _SL_INCLUDE_FUNC(sl_Accept)
dflet 0:e89ba455dbcf 706 int16_t sl_Accept(int16_t sd, SlSockAddr_t *addr, SlSocklen_t *addrlen);
dflet 0:e89ba455dbcf 707 #endif
dflet 0:e89ba455dbcf 708
dflet 0:e89ba455dbcf 709 /*!
dflet 0:e89ba455dbcf 710 \brief assign a name to a socket
dflet 0:e89ba455dbcf 711
dflet 0:e89ba455dbcf 712 This function gives the socket the local address addr.
dflet 0:e89ba455dbcf 713 addr is addrlen bytes long. Traditionally, this is called
dflet 0:e89ba455dbcf 714 When a socket is created with socket, it exists in a name
dflet 0:e89ba455dbcf 715 space (address family) but has no name assigned.
dflet 0:e89ba455dbcf 716 It is necessary to assign a local address before a SOCK_STREAM
dflet 0:e89ba455dbcf 717 socket may receive connections.
dflet 0:e89ba455dbcf 718
dflet 0:e89ba455dbcf 719 \param[in] sd socket descriptor (handle)
dflet 0:e89ba455dbcf 720 \param[in] addr specifies the destination
dflet 0:e89ba455dbcf 721 addrs\n sockaddr:\n - code for
dflet 0:e89ba455dbcf 722 the address format. On this
dflet 0:e89ba455dbcf 723 version only AF_INET is
dflet 0:e89ba455dbcf 724 supported.\n - socket address,
dflet 0:e89ba455dbcf 725 the length depends on the code
dflet 0:e89ba455dbcf 726 format
dflet 0:e89ba455dbcf 727 \param[in] addrlen contains the size of the structure pointed to by addr
dflet 0:e89ba455dbcf 728
dflet 0:e89ba455dbcf 729 \return On success, zero is returned. On error, a negative error code is returned.
dflet 0:e89ba455dbcf 730
dflet 0:e89ba455dbcf 731 \sa sl_Socket sl_Accept sl_Listen
dflet 0:e89ba455dbcf 732 \note belongs to \ref basic_api
dflet 0:e89ba455dbcf 733 \warning
dflet 0:e89ba455dbcf 734 */
dflet 0:e89ba455dbcf 735 #if _SL_INCLUDE_FUNC(sl_Bind)
dflet 0:e89ba455dbcf 736 int16_t sl_Bind(int16_t sd, const SlSockAddr_t *addr, int16_t addrlen);
dflet 0:e89ba455dbcf 737 #endif
dflet 0:e89ba455dbcf 738
dflet 0:e89ba455dbcf 739 /*!
dflet 0:e89ba455dbcf 740 \brief listen for connections on a socket
dflet 0:e89ba455dbcf 741
dflet 0:e89ba455dbcf 742 The willingness to accept incoming connections and a queue
dflet 0:e89ba455dbcf 743 limit for incoming connections are specified with listen(),
dflet 0:e89ba455dbcf 744 and then the connections are accepted with accept.
dflet 0:e89ba455dbcf 745 The listen() call applies only to sockets of type SOCK_STREAM
dflet 0:e89ba455dbcf 746 The backlog parameter defines the maximum length the queue of
dflet 0:e89ba455dbcf 747 pending connections may grow to.
dflet 0:e89ba455dbcf 748
dflet 0:e89ba455dbcf 749 \param[in] sd socket descriptor (handle)
dflet 0:e89ba455dbcf 750 \param[in] backlog specifies the listen queue depth.
dflet 0:e89ba455dbcf 751
dflet 0:e89ba455dbcf 752
dflet 0:e89ba455dbcf 753 \return On success, zero is returned. On error, a negative error code is returned.
dflet 0:e89ba455dbcf 754
dflet 0:e89ba455dbcf 755 \sa sl_Socket sl_Accept sl_Bind
dflet 0:e89ba455dbcf 756 \note belongs to \ref server_side
dflet 0:e89ba455dbcf 757 \warning
dflet 0:e89ba455dbcf 758 */
dflet 0:e89ba455dbcf 759 #if _SL_INCLUDE_FUNC(sl_Listen)
dflet 0:e89ba455dbcf 760 int16_t sl_Listen(int16_t sd, int16_t backlog);
dflet 0:e89ba455dbcf 761 #endif
dflet 0:e89ba455dbcf 762
dflet 0:e89ba455dbcf 763 /*!
dflet 0:e89ba455dbcf 764 \brief Initiate a connection on a socket
dflet 0:e89ba455dbcf 765
dflet 0:e89ba455dbcf 766 Function connects the socket referred to by the socket
dflet 0:e89ba455dbcf 767 descriptor sd, to the address specified by addr. The addrlen
dflet 0:e89ba455dbcf 768 argument specifies the size of addr. The format of the
dflet 0:e89ba455dbcf 769 address in addr is determined by the address space of the
dflet 0:e89ba455dbcf 770 socket. If it is of type SOCK_DGRAM, this call specifies the
dflet 0:e89ba455dbcf 771 peer with which the socket is to be associated; this address
dflet 0:e89ba455dbcf 772 is that to which datagrams are to be sent, and the only
dflet 0:e89ba455dbcf 773 address from which datagrams are to be received. If the
dflet 0:e89ba455dbcf 774 socket is of type SOCK_STREAM, this call attempts to make a
dflet 0:e89ba455dbcf 775 connection to another socket. The other socket is specified
dflet 0:e89ba455dbcf 776 by address, which is an address in the communications space
dflet 0:e89ba455dbcf 777 of the socket.
dflet 0:e89ba455dbcf 778
dflet 0:e89ba455dbcf 779
dflet 0:e89ba455dbcf 780 \param[in] sd socket descriptor (handle)
dflet 0:e89ba455dbcf 781 \param[in] addr specifies the destination addr\n
dflet 0:e89ba455dbcf 782 sockaddr:\n - code for the
dflet 0:e89ba455dbcf 783 address format. On this version
dflet 0:e89ba455dbcf 784 only AF_INET is supported.\n -
dflet 0:e89ba455dbcf 785 socket address, the length
dflet 0:e89ba455dbcf 786 depends on the code format
dflet 0:e89ba455dbcf 787
dflet 0:e89ba455dbcf 788 \param[in] addrlen contains the size of the structure pointed
dflet 0:e89ba455dbcf 789 to by addr
dflet 0:e89ba455dbcf 790
dflet 0:e89ba455dbcf 791 \return On success, a socket handle.
dflet 0:e89ba455dbcf 792 On a non-blocking connect a possible negative value is SL_EALREADY.
dflet 0:e89ba455dbcf 793 On failure, negative value.
dflet 0:e89ba455dbcf 794 SL_POOL_IS_EMPTY may be return in case there are no resources in the system
dflet 0:e89ba455dbcf 795 In this case try again later or increase MAX_CONCURRENT_ACTIONS
dflet 0:e89ba455dbcf 796
dflet 0:e89ba455dbcf 797 \sa sl_Socket
dflet 0:e89ba455dbcf 798 \note belongs to \ref client_side
dflet 0:e89ba455dbcf 799 \warning
dflet 0:e89ba455dbcf 800 */
dflet 0:e89ba455dbcf 801 #if _SL_INCLUDE_FUNC(sl_Connect)
dflet 0:e89ba455dbcf 802 int16_t sl_Connect(int16_t sd, const SlSockAddr_t *addr, int16_t addrlen);
dflet 0:e89ba455dbcf 803 #endif
dflet 0:e89ba455dbcf 804
dflet 0:e89ba455dbcf 805 /*!
dflet 0:e89ba455dbcf 806 \brief Monitor socket activity
dflet 0:e89ba455dbcf 807
dflet 0:e89ba455dbcf 808 Select allow a program to monitor multiple file descriptors,
dflet 0:e89ba455dbcf 809 waiting until one or more of the file descriptors become
dflet 0:e89ba455dbcf 810 "ready" for some class of I/O operation
dflet 0:e89ba455dbcf 811
dflet 0:e89ba455dbcf 812
dflet 0:e89ba455dbcf 813 \param[in] nfds the highest-numbered file descriptor in any of the
dflet 0:e89ba455dbcf 814 three sets, plus 1.
dflet 0:e89ba455dbcf 815 \param[out] readsds socket descriptors list for read monitoring and accept monitoring
dflet 0:e89ba455dbcf 816 \param[out] writesds socket descriptors list for connect monitoring only, write monitoring is not supported
dflet 0:e89ba455dbcf 817 \param[out] exceptsds socket descriptors list for exception monitoring, not supported.
dflet 0:e89ba455dbcf 818 \param[in] timeout is an upper bound on the amount of time elapsed
dflet 0:e89ba455dbcf 819 before select() returns. Null or above 0xffff seconds means
dflet 0:e89ba455dbcf 820 infinity timeout. The minimum timeout is 10 milliseconds,
dflet 0:e89ba455dbcf 821 less than 10 milliseconds will be set automatically to 10 milliseconds.
dflet 0:e89ba455dbcf 822 Max microseconds supported is 0xfffc00.
dflet 0:e89ba455dbcf 823
dflet 0:e89ba455dbcf 824 \return On success, select() returns the number of
dflet 0:e89ba455dbcf 825 file descriptors contained in the three returned
dflet 0:e89ba455dbcf 826 descriptor sets (that is, the total number of bits that
dflet 0:e89ba455dbcf 827 are set in readfds, writefds, exceptfds) which may be
dflet 0:e89ba455dbcf 828 zero if the timeout expires before anything interesting
dflet 0:e89ba455dbcf 829 happens. On error, a negative value is returned.
dflet 0:e89ba455dbcf 830 readsds - return the sockets on which Read request will
dflet 0:e89ba455dbcf 831 return without delay with valid data.
dflet 0:e89ba455dbcf 832 writesds - return the sockets on which Write request
dflet 0:e89ba455dbcf 833 will return without delay.
dflet 0:e89ba455dbcf 834 exceptsds - return the sockets closed recently.
dflet 0:e89ba455dbcf 835 SL_POOL_IS_EMPTY may be return in case there are no resources in the system
dflet 0:e89ba455dbcf 836 In this case try again later or increase MAX_CONCURRENT_ACTIONS
dflet 0:e89ba455dbcf 837
dflet 0:e89ba455dbcf 838 \sa sl_Socket
dflet 0:e89ba455dbcf 839 \note If the timeout value set to less than 5ms it will automatically set
dflet 0:e89ba455dbcf 840 to 5ms to prevent overload of the system
dflet 0:e89ba455dbcf 841 belongs to \ref basic_api
dflet 0:e89ba455dbcf 842
dflet 0:e89ba455dbcf 843 Only one sl_Select can be handled at a time.
dflet 0:e89ba455dbcf 844 Calling this API while the same command is called from another thread, may result
dflet 0:e89ba455dbcf 845 in one of the two scenarios:
dflet 0:e89ba455dbcf 846 1. The command will wait (internal) until the previous command finish, and then be executed.
dflet 0:e89ba455dbcf 847 2. There are not enough resources and SL_POOL_IS_EMPTY error will return.
dflet 0:e89ba455dbcf 848 In this case, MAX_CONCURRENT_ACTIONS can be increased (result in memory increase) or try
dflet 0:e89ba455dbcf 849 again later to issue the command.
dflet 0:e89ba455dbcf 850
dflet 0:e89ba455dbcf 851 \warning
dflet 0:e89ba455dbcf 852 */
dflet 0:e89ba455dbcf 853 #if _SL_INCLUDE_FUNC(sl_Select)
dflet 0:e89ba455dbcf 854 int16_t sl_Select(int16_t nfds, SlFdSet_t *readsds, SlFdSet_t *writesds, SlFdSet_t *exceptsds, SlTimeval_t *timeout);
dflet 0:e89ba455dbcf 855
dflet 0:e89ba455dbcf 856
dflet 0:e89ba455dbcf 857 /*!
dflet 0:e89ba455dbcf 858 \brief Select's SlFdSet_t SET function
dflet 0:e89ba455dbcf 859
dflet 0:e89ba455dbcf 860 Sets current socket descriptor on SlFdSet_t container
dflet 0:e89ba455dbcf 861 */
dflet 0:e89ba455dbcf 862 void SL_FD_SET(int16_t fd, SlFdSet_t *fdset);
dflet 0:e89ba455dbcf 863
dflet 0:e89ba455dbcf 864 /*!
dflet 0:e89ba455dbcf 865 \brief Select's SlFdSet_t CLR function
dflet 0:e89ba455dbcf 866
dflet 0:e89ba455dbcf 867 Clears current socket descriptor on SlFdSet_t container
dflet 0:e89ba455dbcf 868 */
dflet 0:e89ba455dbcf 869 void SL_FD_CLR(int16_t fd, SlFdSet_t *fdset);
dflet 0:e89ba455dbcf 870
dflet 0:e89ba455dbcf 871
dflet 0:e89ba455dbcf 872 /*!
dflet 0:e89ba455dbcf 873 \brief Select's SlFdSet_t ISSET function
dflet 0:e89ba455dbcf 874
dflet 0:e89ba455dbcf 875 Checks if current socket descriptor is set (TRUE/FALSE)
dflet 0:e89ba455dbcf 876
dflet 0:e89ba455dbcf 877 \return Returns TRUE if set, FALSE if unset
dflet 0:e89ba455dbcf 878
dflet 0:e89ba455dbcf 879 */
dflet 0:e89ba455dbcf 880 int16_t SL_FD_ISSET(int16_t fd, SlFdSet_t *fdset);
dflet 0:e89ba455dbcf 881
dflet 0:e89ba455dbcf 882 /*!
dflet 0:e89ba455dbcf 883 \brief Select's SlFdSet_t ZERO function
dflet 0:e89ba455dbcf 884
dflet 0:e89ba455dbcf 885 Clears all socket descriptors from SlFdSet_t
dflet 0:e89ba455dbcf 886 */
dflet 0:e89ba455dbcf 887 void SL_FD_ZERO(SlFdSet_t *fdset);
dflet 0:e89ba455dbcf 888
dflet 0:e89ba455dbcf 889
dflet 0:e89ba455dbcf 890
dflet 0:e89ba455dbcf 891 #endif
dflet 0:e89ba455dbcf 892
dflet 0:e89ba455dbcf 893 /*!
dflet 0:e89ba455dbcf 894 \brief set socket options
dflet 0:e89ba455dbcf 895
dflet 0:e89ba455dbcf 896 This function manipulate the options associated with a socket.
dflet 0:e89ba455dbcf 897 Options may exist at multiple protocol levels; they are always
dflet 0:e89ba455dbcf 898 present at the uppermost socket level.
dflet 0:e89ba455dbcf 899
dflet 0:e89ba455dbcf 900 When manipulating socket options the level at which the option resides
dflet 0:e89ba455dbcf 901 and the name of the option must be specified. To manipulate options at
dflet 0:e89ba455dbcf 902 the socket level, level is specified as SOL_SOCKET. To manipulate
dflet 0:e89ba455dbcf 903 options at any other level the protocol number of the appropriate proto-
dflet 0:e89ba455dbcf 904 col controlling the option is supplied. For example, to indicate that an
dflet 0:e89ba455dbcf 905 option is to be interpreted by the TCP protocol, level should be set to
dflet 0:e89ba455dbcf 906 the protocol number of TCP;
dflet 0:e89ba455dbcf 907
dflet 0:e89ba455dbcf 908 The parameters optval and optlen are used to access optval -
dflet 0:e89ba455dbcf 909 ues for setsockopt(). For getsockopt() they identify a
dflet 0:e89ba455dbcf 910 buffer in which the value for the requested option(s) are to
dflet 0:e89ba455dbcf 911 be returned. For getsockopt(), optlen is a value-result
dflet 0:e89ba455dbcf 912 parameter, initially containing the size of the buffer
dflet 0:e89ba455dbcf 913 pointed to by option_value, and modified on return to
dflet 0:e89ba455dbcf 914 indicate the actual size of the value returned. If no option
dflet 0:e89ba455dbcf 915 value is to be supplied or returned, option_value may be
dflet 0:e89ba455dbcf 916 NULL.
dflet 0:e89ba455dbcf 917
dflet 0:e89ba455dbcf 918 \param[in] sd socket handle
dflet 0:e89ba455dbcf 919 \param[in] level defines the protocol level for this option
dflet 0:e89ba455dbcf 920 - <b>SL_SOL_SOCKET</b> Socket level configurations (L4, transport layer)
dflet 0:e89ba455dbcf 921 - <b>SL_IPPROTO_IP</b> IP level configurations (L3, network layer)
dflet 0:e89ba455dbcf 922 - <b>SL_SOL_PHY_OPT</b> Link level configurations (L2, link layer)
dflet 0:e89ba455dbcf 923 \param[in] optname defines the option name to interrogate
dflet 0:e89ba455dbcf 924 - <b>SL_SOL_SOCKET</b>
dflet 0:e89ba455dbcf 925 - <b>SL_SO_KEEPALIVE</b> \n
dflet 0:e89ba455dbcf 926 Enable/Disable periodic keep alive.
dflet 0:e89ba455dbcf 927 Keeps TCP connections active by enabling the periodic transmission of messages \n
dflet 0:e89ba455dbcf 928 Timeout is 5 minutes.\n
dflet 0:e89ba455dbcf 929 Default: Enabled \n
dflet 0:e89ba455dbcf 930 This options takes SlSockKeepalive_t struct as parameter
dflet 0:e89ba455dbcf 931 - <b>SL_SO_RCVTIMEO</b> \n
dflet 0:e89ba455dbcf 932 Sets the timeout value that specifies the maximum amount of time an input function waits until it completes. \n
dflet 0:e89ba455dbcf 933 Default: No timeout \n
dflet 0:e89ba455dbcf 934 This options takes SlTimeval_t struct as parameter
dflet 0:e89ba455dbcf 935 - <b>SL_SO_RCVBUF</b> \n
dflet 0:e89ba455dbcf 936 Sets tcp max recv window size. \n
dflet 0:e89ba455dbcf 937 This options takes SlSockWinsize_t struct as parameter
dflet 0:e89ba455dbcf 938 - <b>SL_SO_NONBLOCKING</b> \n
dflet 0:e89ba455dbcf 939 Sets socket to non-blocking operation Impacts: connect, accept, send, sendto, recv and recvfrom. \n
dflet 0:e89ba455dbcf 940 Default: Blocking.
dflet 0:e89ba455dbcf 941 This options takes SlSockNonblocking_t struct as parameter
dflet 0:e89ba455dbcf 942 - <b>SL_SO_SECMETHOD</b> \n
dflet 0:e89ba455dbcf 943 Sets method to tcp secured socket (SL_SEC_SOCKET) \n
dflet 0:e89ba455dbcf 944 Default: SL_SO_SEC_METHOD_SSLv3_TLSV1_2 \n
dflet 0:e89ba455dbcf 945 This options takes SlSockSecureMethod struct as parameter
dflet 0:e89ba455dbcf 946 - <b>SL_SO_SEC_MASK</b> \n
dflet 0:e89ba455dbcf 947 Sets specific cipher to tcp secured socket (SL_SEC_SOCKET) \n
dflet 0:e89ba455dbcf 948 Default: "Best" cipher suitable to method \n
dflet 0:e89ba455dbcf 949 This options takes SlSockSecureMask struct as parameter
dflet 0:e89ba455dbcf 950 - <b>SL_SO_SECURE_FILES_CA_FILE_NAME</b> \n
dflet 0:e89ba455dbcf 951 Map secured socket to CA file by name \n
dflet 0:e89ba455dbcf 952 This options takes <b>uint8_t</b> buffer as parameter
dflet 0:e89ba455dbcf 953 - <b>SL_SO_SECURE_FILES_PRIVATE_KEY_FILE_NAME</b> \n
dflet 0:e89ba455dbcf 954 Map secured socket to private key by name \n
dflet 0:e89ba455dbcf 955 This options takes <b>uint8_t</b> buffer as parameter
dflet 0:e89ba455dbcf 956 - <b>SL_SO_SECURE_FILES_CERTIFICATE_FILE_NAME</b> \n
dflet 0:e89ba455dbcf 957 Map secured socket to certificate file by name \n
dflet 0:e89ba455dbcf 958 This options takes <b>uint8_t</b> buffer as parameter
dflet 0:e89ba455dbcf 959 - <b>SL_SO_SECURE_FILES_DH_KEY_FILE_NAME</b> \n
dflet 0:e89ba455dbcf 960 Map secured socket to Diffie Hellman file by name \n
dflet 0:e89ba455dbcf 961 This options takes <b>uint8_t</b> buffer as parameter
dflet 0:e89ba455dbcf 962 - <b>SL_SO_CHANGE_CHANNEL</b> \n
dflet 0:e89ba455dbcf 963 Sets channel in transceiver mode.
dflet 0:e89ba455dbcf 964 This options takes <b>uint32_t</b> as channel number parameter
dflet 0:e89ba455dbcf 965 - <b>SL_IPPROTO_IP</b>
dflet 0:e89ba455dbcf 966 - <b>SL_IP_MULTICAST_TTL</b> \n
dflet 0:e89ba455dbcf 967 Set the time-to-live value of outgoing multicast packets for this socket. \n
dflet 0:e89ba455dbcf 968 This options takes <b>uint8_t</b> as parameter
dflet 0:e89ba455dbcf 969 - <b>SL_IP_ADD_MEMBERSHIP</b> \n
dflet 0:e89ba455dbcf 970 UDP socket, Join a multicast group. \n
dflet 0:e89ba455dbcf 971 This options takes SlSockIpMreq struct as parameter
dflet 0:e89ba455dbcf 972 - <b>SL_IP_DROP_MEMBERSHIP</b> \n
dflet 0:e89ba455dbcf 973 UDP socket, Leave a multicast group \n
dflet 0:e89ba455dbcf 974 This options takes SlSockIpMreq struct as parameter
dflet 0:e89ba455dbcf 975 - <b>SL_IP_RAW_RX_NO_HEADER</b> \n
dflet 0:e89ba455dbcf 976 Raw socket remove IP header from received data. \n
dflet 0:e89ba455dbcf 977 Default: data includes ip header \n
dflet 0:e89ba455dbcf 978 This options takes <b>uint32_t</b> as parameter
dflet 0:e89ba455dbcf 979 - <b>SL_IP_HDRINCL</b> \n
dflet 0:e89ba455dbcf 980 RAW socket only, the IPv4 layer generates an IP header when sending a packet unless \n
dflet 0:e89ba455dbcf 981 the IP_HDRINCL socket option is enabled on the socket. \n
dflet 0:e89ba455dbcf 982 When it is enabled, the packet must contain an IP header. \n
dflet 0:e89ba455dbcf 983 Default: disabled, IPv4 header generated by Network Stack \n
dflet 0:e89ba455dbcf 984 This options takes <b>uint32_t</b> as parameter
dflet 0:e89ba455dbcf 985 - <b>SL_IP_RAW_IPV6_HDRINCL</b> (inactive) \n
dflet 0:e89ba455dbcf 986 RAW socket only, the IPv6 layer generates an IP header when sending a packet unless \n
dflet 0:e89ba455dbcf 987 the IP_HDRINCL socket option is enabled on the socket. When it is enabled, the packet must contain an IP header \n
dflet 0:e89ba455dbcf 988 Default: disabled, IPv4 header generated by Network Stack \n
dflet 0:e89ba455dbcf 989 This options takes <b>uint32_t</b> as parameter
dflet 0:e89ba455dbcf 990 - <b>SL_SOL_PHY_OPT</b>
dflet 0:e89ba455dbcf 991 - <b>SL_SO_PHY_RATE</b> \n
dflet 0:e89ba455dbcf 992 RAW socket, set WLAN PHY transmit rate \n
dflet 0:e89ba455dbcf 993 The values are based on RateIndex_e \n
dflet 0:e89ba455dbcf 994 This options takes <b>uint32_t</b> as parameter
dflet 0:e89ba455dbcf 995 - <b>SL_SO_PHY_TX_POWER</b> \n
dflet 0:e89ba455dbcf 996 RAW socket, set WLAN PHY TX power \n
dflet 0:e89ba455dbcf 997 Valid rage is 1-15 \n
dflet 0:e89ba455dbcf 998 This options takes <b>uint32_t</b> as parameter
dflet 0:e89ba455dbcf 999 - <b>SL_SO_PHY_NUM_FRAMES_TO_TX</b> \n
dflet 0:e89ba455dbcf 1000 RAW socket, set number of frames to transmit in transceiver mode.
dflet 0:e89ba455dbcf 1001 Default: 1 packet
dflet 0:e89ba455dbcf 1002 This options takes <b>uint32_t</b> as parameter
dflet 0:e89ba455dbcf 1003 - <b>SL_SO_PHY_PREAMBLE</b> \n
dflet 0:e89ba455dbcf 1004 RAW socket, set WLAN PHY preamble for Long/Short\n
dflet 0:e89ba455dbcf 1005 This options takes <b>uint32_t</b> as parameter
dflet 0:e89ba455dbcf 1006
dflet 0:e89ba455dbcf 1007 \param[in] optval specifies a value for the option
dflet 0:e89ba455dbcf 1008 \param[in] optlen specifies the length of the
dflet 0:e89ba455dbcf 1009 option value
dflet 0:e89ba455dbcf 1010
dflet 0:e89ba455dbcf 1011 \return On success, zero is returned.
dflet 0:e89ba455dbcf 1012 On error, a negative value is returned.
dflet 0:e89ba455dbcf 1013 \sa sl_getsockopt
dflet 0:e89ba455dbcf 1014 \note belongs to \ref basic_api
dflet 0:e89ba455dbcf 1015 \warning
dflet 0:e89ba455dbcf 1016 \par Examples:
dflet 0:e89ba455dbcf 1017 \par
dflet 0:e89ba455dbcf 1018 <b> SL_SO_KEEPALIVE: </b>(disable Keepalive)
dflet 0:e89ba455dbcf 1019 \code
dflet 0:e89ba455dbcf 1020 SlSockKeepalive_t enableOption;
dflet 0:e89ba455dbcf 1021 enableOption.KeepaliveEnabled = 0;
dflet 0:e89ba455dbcf 1022 sl_SetSockOpt(SockID,SL_SOL_SOCKET,SL_SO_KEEPALIVE, (uint8_t *)&enableOption,sizeof(enableOption));
dflet 0:e89ba455dbcf 1023 \endcode
dflet 0:e89ba455dbcf 1024 \par
dflet 0:e89ba455dbcf 1025 <b> SL_SO_RCVTIMEO: </b>
dflet 0:e89ba455dbcf 1026 \code
dflet 0:e89ba455dbcf 1027 struct SlTimeval_t timeVal;
dflet 0:e89ba455dbcf 1028 timeVal.tv_sec = 1; // Seconds
dflet 0:e89ba455dbcf 1029 timeVal.tv_usec = 0; // Microseconds. 10000 microseconds resolution
dflet 0:e89ba455dbcf 1030 sl_SetSockOpt(SockID,SL_SOL_SOCKET,SL_SO_RCVTIMEO, (uint8_t *)&timeVal, sizeof(timeVal)); // Enable receive timeout
dflet 0:e89ba455dbcf 1031 \endcode
dflet 0:e89ba455dbcf 1032 \par
dflet 0:e89ba455dbcf 1033 <b> SL_SO_RCVBUF: </b>
dflet 0:e89ba455dbcf 1034 \code
dflet 0:e89ba455dbcf 1035 SlSockWinsize_t size;
dflet 0:e89ba455dbcf 1036 size.Winsize = 3000; // bytes
dflet 0:e89ba455dbcf 1037 sl_SetSockOpt(SockID,SL_SOL_SOCKET,SL_SO_RCVBUF, (uint8_t *)&size, sizeof(size));
dflet 0:e89ba455dbcf 1038 \endcode
dflet 0:e89ba455dbcf 1039 \par
dflet 0:e89ba455dbcf 1040 <b> SL_SO_NONBLOCKING: </b>
dflet 0:e89ba455dbcf 1041 \code
dflet 0:e89ba455dbcf 1042 SlSockNonblocking_t enableOption;
dflet 0:e89ba455dbcf 1043 enableOption.NonblockingEnabled = 1;
dflet 0:e89ba455dbcf 1044 sl_SetSockOpt(SockID,SL_SOL_SOCKET,SL_SO_NONBLOCKING, (uint8_t *)&enableOption,sizeof(enableOption)); // Enable/disable nonblocking mode
dflet 0:e89ba455dbcf 1045 \endcode
dflet 0:e89ba455dbcf 1046 \par
dflet 0:e89ba455dbcf 1047 <b> SL_SO_SECMETHOD:</b>
dflet 0:e89ba455dbcf 1048 \code
dflet 0:e89ba455dbcf 1049 SlSockSecureMethod method;
dflet 0:e89ba455dbcf 1050 method.secureMethod = SL_SO_SEC_METHOD_SSLV3; // security method we want to use
dflet 0:e89ba455dbcf 1051 SockID = sl_Socket(SL_AF_INET,SL_SOCK_STREAM, SL_SEC_SOCKET);
dflet 0:e89ba455dbcf 1052 sl_SetSockOpt(SockID, SL_SOL_SOCKET, SL_SO_SECMETHOD, (uint8_t *)&method, sizeof(method));
dflet 0:e89ba455dbcf 1053 \endcode
dflet 0:e89ba455dbcf 1054 \par
dflet 0:e89ba455dbcf 1055 <b> SL_SO_SECURE_MASK:</b>
dflet 0:e89ba455dbcf 1056 \code
dflet 0:e89ba455dbcf 1057 SlSockSecureMask cipher;
dflet 0:e89ba455dbcf 1058 cipher.secureMask = SL_SEC_MASK_SSL_RSA_WITH_RC4_128_SHA; // cipher type
dflet 0:e89ba455dbcf 1059 SockID = sl_Socket(SL_AF_INET,SL_SOCK_STREAM, SL_SEC_SOCKET);
dflet 0:e89ba455dbcf 1060 sl_SetSockOpt(SockID, SL_SOL_SOCKET, SL_SO_SEC_MASK,(uint8_t *)&cipher, sizeof(cipher));
dflet 0:e89ba455dbcf 1061 \endcode
dflet 0:e89ba455dbcf 1062 \par
dflet 0:e89ba455dbcf 1063 <b> SL_SO_SECURE_FILES_CA_FILE_NAME:</b>
dflet 0:e89ba455dbcf 1064 \code
dflet 0:e89ba455dbcf 1065 sl_SetSockOpt(SockID,SL_SOL_SOCKET,SL_SO_SECURE_FILES_CA_FILE_NAME,"exuifaxCaCert.der",strlen("exuifaxCaCert.der"));
dflet 0:e89ba455dbcf 1066 \endcode
dflet 0:e89ba455dbcf 1067
dflet 0:e89ba455dbcf 1068 \par
dflet 0:e89ba455dbcf 1069 <b> SL_SO_SECURE_FILES_PRIVATE_KEY_FILE_NAME:</b>
dflet 0:e89ba455dbcf 1070 \code
dflet 0:e89ba455dbcf 1071 sl_SetSockOpt(SockID,SL_SOL_SOCKET,SL_SO_SECURE_FILES_PRIVATE_KEY_FILE_NAME,"myPrivateKey.der",strlen("myPrivateKey.der"));
dflet 0:e89ba455dbcf 1072 \endcode
dflet 0:e89ba455dbcf 1073
dflet 0:e89ba455dbcf 1074 \par
dflet 0:e89ba455dbcf 1075 <b> SL_SO_SECURE_FILES_CERTIFICATE_FILE_NAME:</b>
dflet 0:e89ba455dbcf 1076 \code
dflet 0:e89ba455dbcf 1077 sl_SetSockOpt(SockID,SL_SOL_SOCKET,SL_SO_SECURE_FILES_CERTIFICATE_FILE_NAME,"myCertificate.der",strlen("myCertificate.der"));
dflet 0:e89ba455dbcf 1078 \endcode
dflet 0:e89ba455dbcf 1079
dflet 0:e89ba455dbcf 1080 \par
dflet 0:e89ba455dbcf 1081 <b> SL_SO_SECURE_FILES_DH_KEY_FILE_NAME:</b>
dflet 0:e89ba455dbcf 1082 \code
dflet 0:e89ba455dbcf 1083 sl_SetSockOpt(SockID,SL_SOL_SOCKET,SL_SO_SECURE_FILES_DH_KEY_FILE_NAME,"myDHinServerMode.der",strlen("myDHinServerMode.der"));
dflet 0:e89ba455dbcf 1084 \endcode
dflet 0:e89ba455dbcf 1085
dflet 0:e89ba455dbcf 1086 \par
dflet 0:e89ba455dbcf 1087 <b> SL_IP_MULTICAST_TTL:</b>
dflet 0:e89ba455dbcf 1088 \code
dflet 0:e89ba455dbcf 1089 uint8_t ttl = 20;
dflet 0:e89ba455dbcf 1090 sl_SetSockOpt(SockID, SL_IPPROTO_IP, SL_IP_MULTICAST_TTL, &ttl, sizeof(ttl));
dflet 0:e89ba455dbcf 1091 \endcode
dflet 0:e89ba455dbcf 1092
dflet 0:e89ba455dbcf 1093 \par
dflet 0:e89ba455dbcf 1094 <b> SL_IP_ADD_MEMBERSHIP:</b>
dflet 0:e89ba455dbcf 1095 \code
dflet 0:e89ba455dbcf 1096 SlSockIpMreq mreq;
dflet 0:e89ba455dbcf 1097 sl_SetSockOpt(SockID, SL_IPPROTO_IP, SL_IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq));
dflet 0:e89ba455dbcf 1098 \endcode
dflet 0:e89ba455dbcf 1099
dflet 0:e89ba455dbcf 1100 \par
dflet 0:e89ba455dbcf 1101 <b> SL_IP_DROP_MEMBERSHIP:</b>
dflet 0:e89ba455dbcf 1102 \code
dflet 0:e89ba455dbcf 1103 SlSockIpMreq mreq;
dflet 0:e89ba455dbcf 1104 sl_SetSockOpt(SockID, SL_IPPROTO_IP, SL_IP_DROP_MEMBERSHIP, &mreq, sizeof(mreq));
dflet 0:e89ba455dbcf 1105 \endcode
dflet 0:e89ba455dbcf 1106
dflet 0:e89ba455dbcf 1107 \par
dflet 0:e89ba455dbcf 1108 <b> SL_SO_CHANGE_CHANNEL:</b>
dflet 0:e89ba455dbcf 1109 \code
dflet 0:e89ba455dbcf 1110 uint32_t newChannel = 6; // range is 1-13
dflet 0:e89ba455dbcf 1111 sl_SetSockOpt(SockID, SL_SOL_SOCKET, SL_SO_CHANGE_CHANNEL, &newChannel, sizeof(newChannel));
dflet 0:e89ba455dbcf 1112 \endcode
dflet 0:e89ba455dbcf 1113
dflet 0:e89ba455dbcf 1114 \par
dflet 0:e89ba455dbcf 1115 <b> SL_IP_RAW_RX_NO_HEADER:</b>
dflet 0:e89ba455dbcf 1116 \code
dflet 0:e89ba455dbcf 1117 uint32_t header = 1; // remove ip header
dflet 0:e89ba455dbcf 1118 sl_SetSockOpt(SockID, SL_IPPROTO_IP, SL_IP_RAW_RX_NO_HEADER, &header, sizeof(header));
dflet 0:e89ba455dbcf 1119 \endcode
dflet 0:e89ba455dbcf 1120
dflet 0:e89ba455dbcf 1121 \par
dflet 0:e89ba455dbcf 1122 <b> SL_IP_HDRINCL:</b>
dflet 0:e89ba455dbcf 1123 \code
dflet 0:e89ba455dbcf 1124 uint32_t header = 1;
dflet 0:e89ba455dbcf 1125 sl_SetSockOpt(SockID, SL_IPPROTO_IP, SL_IP_HDRINCL, &header, sizeof(header));
dflet 0:e89ba455dbcf 1126 \endcode
dflet 0:e89ba455dbcf 1127 \par
dflet 0:e89ba455dbcf 1128 <b> SL_IP_RAW_IPV6_HDRINCL:</b>
dflet 0:e89ba455dbcf 1129 \code
dflet 0:e89ba455dbcf 1130 uint32_t header = 1;
dflet 0:e89ba455dbcf 1131 sl_SetSockOpt(SockID, SL_IPPROTO_IP, SL_IP_RAW_IPV6_HDRINCL, &header, sizeof(header));
dflet 0:e89ba455dbcf 1132 \endcode
dflet 0:e89ba455dbcf 1133
dflet 0:e89ba455dbcf 1134 \par
dflet 0:e89ba455dbcf 1135 <b> SL_SO_PHY_RATE:</b>
dflet 0:e89ba455dbcf 1136 \code
dflet 0:e89ba455dbcf 1137 uint32_t rate = 6; // see wlan.h RateIndex_e for values
dflet 0:e89ba455dbcf 1138 sl_SetSockOpt(SockID, SL_SOL_PHY_OPT, SL_SO_PHY_RATE, &rate, sizeof(rate));
dflet 0:e89ba455dbcf 1139 \endcode
dflet 0:e89ba455dbcf 1140
dflet 0:e89ba455dbcf 1141 \par
dflet 0:e89ba455dbcf 1142 <b> SL_SO_PHY_TX_POWER:</b>
dflet 0:e89ba455dbcf 1143 \code
dflet 0:e89ba455dbcf 1144 uint32_t txpower = 1; // valid range is 1-15
dflet 0:e89ba455dbcf 1145 sl_SetSockOpt(SockID, SL_SOL_PHY_OPT, SL_SO_PHY_TX_POWER, &txpower, sizeof(txpower));
dflet 0:e89ba455dbcf 1146 \endcode
dflet 0:e89ba455dbcf 1147
dflet 0:e89ba455dbcf 1148 \par
dflet 0:e89ba455dbcf 1149 <b> SL_SO_PHY_NUM_FRAMES_TO_TX:</b>
dflet 0:e89ba455dbcf 1150 \code
dflet 0:e89ba455dbcf 1151 uint32_t numframes = 1;
dflet 0:e89ba455dbcf 1152 sl_SetSockOpt(SockID, SL_SOL_PHY_OPT, SL_SO_PHY_NUM_FRAMES_TO_TX, &numframes, sizeof(numframes));
dflet 0:e89ba455dbcf 1153 \endcode
dflet 0:e89ba455dbcf 1154
dflet 0:e89ba455dbcf 1155 \par
dflet 0:e89ba455dbcf 1156 <b> SL_SO_PHY_PREAMBLE:</b>
dflet 0:e89ba455dbcf 1157 \code
dflet 0:e89ba455dbcf 1158 uint32_t preamble = 1;
dflet 0:e89ba455dbcf 1159 sl_SetSockOpt(SockID, SL_SOL_PHY_OPT, SL_SO_PHY_PREAMBLE, &preamble, sizeof(preamble));
dflet 0:e89ba455dbcf 1160 \endcode
dflet 0:e89ba455dbcf 1161
dflet 0:e89ba455dbcf 1162 */
dflet 0:e89ba455dbcf 1163 #if _SL_INCLUDE_FUNC(sl_SetSockOpt)
dflet 0:e89ba455dbcf 1164 int16_t sl_SetSockOpt(int16_t sd, int16_t level, int16_t optname, const void *optval, SlSocklen_t optlen);
dflet 0:e89ba455dbcf 1165 #endif
dflet 0:e89ba455dbcf 1166
dflet 0:e89ba455dbcf 1167 /*!
dflet 0:e89ba455dbcf 1168 \brief Get socket options
dflet 0:e89ba455dbcf 1169
dflet 0:e89ba455dbcf 1170 This function manipulate the options associated with a socket.
dflet 0:e89ba455dbcf 1171 Options may exist at multiple protocol levels; they are always
dflet 0:e89ba455dbcf 1172 present at the uppermost socket level.
dflet 0:e89ba455dbcf 1173
dflet 0:e89ba455dbcf 1174 When manipulating socket options the level at which the option resides
dflet 0:e89ba455dbcf 1175 and the name of the option must be specified. To manipulate options at
dflet 0:e89ba455dbcf 1176 the socket level, level is specified as SOL_SOCKET. To manipulate
dflet 0:e89ba455dbcf 1177 options at any other level the protocol number of the appropriate proto-
dflet 0:e89ba455dbcf 1178 col controlling the option is supplied. For example, to indicate that an
dflet 0:e89ba455dbcf 1179 option is to be interpreted by the TCP protocol, level should be set to
dflet 0:e89ba455dbcf 1180 the protocol number of TCP;
dflet 0:e89ba455dbcf 1181
dflet 0:e89ba455dbcf 1182 The parameters optval and optlen are used to access optval -
dflet 0:e89ba455dbcf 1183 ues for setsockopt(). For getsockopt() they identify a
dflet 0:e89ba455dbcf 1184 buffer in which the value for the requested option(s) are to
dflet 0:e89ba455dbcf 1185 be returned. For getsockopt(), optlen is a value-result
dflet 0:e89ba455dbcf 1186 parameter, initially containing the size of the buffer
dflet 0:e89ba455dbcf 1187 pointed to by option_value, and modified on return to
dflet 0:e89ba455dbcf 1188 indicate the actual size of the value returned. If no option
dflet 0:e89ba455dbcf 1189 value is to be supplied or returned, option_value may be
dflet 0:e89ba455dbcf 1190 NULL.
dflet 0:e89ba455dbcf 1191
dflet 0:e89ba455dbcf 1192
dflet 0:e89ba455dbcf 1193 \param[in] sd socket handle
dflet 0:e89ba455dbcf 1194 \param[in] level defines the protocol level for this option
dflet 0:e89ba455dbcf 1195 \param[in] optname defines the option name to interrogate
dflet 0:e89ba455dbcf 1196 \param[out] optval specifies a value for the option
dflet 0:e89ba455dbcf 1197 \param[out] optlen specifies the length of the
dflet 0:e89ba455dbcf 1198 option value
dflet 0:e89ba455dbcf 1199
dflet 0:e89ba455dbcf 1200 \return On success, zero is returned.
dflet 0:e89ba455dbcf 1201 On error, a negative value is returned.
dflet 0:e89ba455dbcf 1202 \sa sl_SetSockOpt
dflet 0:e89ba455dbcf 1203 \note See sl_SetSockOpt
dflet 0:e89ba455dbcf 1204 belongs to \ref ext_api
dflet 0:e89ba455dbcf 1205 \warning
dflet 0:e89ba455dbcf 1206 */
dflet 0:e89ba455dbcf 1207 #if _SL_INCLUDE_FUNC(sl_GetSockOpt)
dflet 0:e89ba455dbcf 1208 int16_t sl_GetSockOpt(int16_t sd, int16_t level, int16_t optname, void *optval, SlSocklen_t *optlen);
dflet 0:e89ba455dbcf 1209 #endif
dflet 0:e89ba455dbcf 1210
dflet 0:e89ba455dbcf 1211 /*!
dflet 0:e89ba455dbcf 1212 \brief read data from TCP socket
dflet 0:e89ba455dbcf 1213
dflet 0:e89ba455dbcf 1214 function receives a message from a connection-mode socket
dflet 0:e89ba455dbcf 1215
dflet 0:e89ba455dbcf 1216 \param[in] sd socket handle
dflet 0:e89ba455dbcf 1217 \param[out] buf Points to the buffer where the
dflet 0:e89ba455dbcf 1218 message should be stored.
dflet 0:e89ba455dbcf 1219 \param[in] Len Specifies the length in bytes of
dflet 0:e89ba455dbcf 1220 the buffer pointed to by the buffer argument.
dflet 0:e89ba455dbcf 1221 Range: 1-16000 bytes
dflet 0:e89ba455dbcf 1222 \param[in] flags Specifies the type of message
dflet 0:e89ba455dbcf 1223 reception. On this version, this parameter is not
dflet 0:e89ba455dbcf 1224 supported.
dflet 0:e89ba455dbcf 1225
dflet 0:e89ba455dbcf 1226 \return return the number of bytes received,
dflet 0:e89ba455dbcf 1227 or a negative value if an error occurred.
dflet 0:e89ba455dbcf 1228 using a non-blocking recv a possible negative value is SL_EAGAIN.
dflet 0:e89ba455dbcf 1229 SL_POOL_IS_EMPTY may be return in case there are no resources in the system
dflet 0:e89ba455dbcf 1230 In this case try again later or increase MAX_CONCURRENT_ACTIONS
dflet 0:e89ba455dbcf 1231
dflet 0:e89ba455dbcf 1232 \sa sl_RecvFrom
dflet 0:e89ba455dbcf 1233 \note belongs to \ref recv_api
dflet 0:e89ba455dbcf 1234 \warning
dflet 0:e89ba455dbcf 1235 \par Examples:
dflet 0:e89ba455dbcf 1236 \code An example of receiving data using TCP socket:
dflet 0:e89ba455dbcf 1237
dflet 0:e89ba455dbcf 1238 SlSockAddrIn_t Addr;
dflet 0:e89ba455dbcf 1239 SlSockAddrIn_t LocalAddr;
dflet 0:e89ba455dbcf 1240 int16_t AddrSize = sizeof(SlSockAddrIn_t);
dflet 0:e89ba455dbcf 1241 int16_t SockID, newSockID;
dflet 0:e89ba455dbcf 1242 int16_t Status;
dflet 0:e89ba455dbcf 1243 int8_t Buf[RECV_BUF_LEN];
dflet 0:e89ba455dbcf 1244
dflet 0:e89ba455dbcf 1245 LocalAddr.sin_family = SL_AF_INET;
dflet 0:e89ba455dbcf 1246 LocalAddr.sin_port = sl_Htons(5001);
dflet 0:e89ba455dbcf 1247 LocalAddr.sin_addr.s_addr = 0;
dflet 0:e89ba455dbcf 1248
dflet 0:e89ba455dbcf 1249 Addr.sin_family = SL_AF_INET;
dflet 0:e89ba455dbcf 1250 Addr.sin_port = sl_Htons(5001);
dflet 0:e89ba455dbcf 1251 Addr.sin_addr.s_addr = sl_Htonl(SL_IPV4_VAL(10,1,1,200));
dflet 0:e89ba455dbcf 1252
dflet 0:e89ba455dbcf 1253 SockID = sl_Socket(SL_AF_INET,SL_SOCK_STREAM, 0);
dflet 0:e89ba455dbcf 1254 Status = sl_Bind(SockID, (SlSockAddr_t *)&LocalAddr, AddrSize);
dflet 0:e89ba455dbcf 1255 Status = sl_Listen(SockID, 0);
dflet 0:e89ba455dbcf 1256 newSockID = sl_Accept(SockID, (SlSockAddr_t*)&Addr, (SlSocklen_t*) &AddrSize);
dflet 0:e89ba455dbcf 1257 Status = sl_Recv(newSockID, Buf, 1460, 0);
dflet 0:e89ba455dbcf 1258 \endcode
dflet 0:e89ba455dbcf 1259 \code Example code for Rx transceiver mode using a raw socket
dflet 0:e89ba455dbcf 1260 int8_t buffer[1536];
dflet 0:e89ba455dbcf 1261 int16_t sd;
dflet 0:e89ba455dbcf 1262 uint16_t size;
dflet 0:e89ba455dbcf 1263 SlTransceiverRxOverHead_t *transHeader;
dflet 0:e89ba455dbcf 1264 sd = sl_Socket(SL_AF_RF,SL_SOCK_RAW,11); // channel 11
dflet 0:e89ba455dbcf 1265 while(1)
dflet 0:e89ba455dbcf 1266 {
dflet 0:e89ba455dbcf 1267 size = sl_Recv(sd,buffer,1536,0);
dflet 0:e89ba455dbcf 1268 transHeader = (SlTransceiverRxOverHead_t *)buffer;
dflet 0:e89ba455dbcf 1269 printf("RSSI is %d frame type is 0x%x size %d\n",transHeader->rssi,buffer[sizeof(SlTransceiverRxOverHead_t)],size);
dflet 0:e89ba455dbcf 1270 }
dflet 0:e89ba455dbcf 1271 \endcode
dflet 0:e89ba455dbcf 1272 */
dflet 0:e89ba455dbcf 1273 #if _SL_INCLUDE_FUNC(sl_Recv)
dflet 0:e89ba455dbcf 1274 int16_t sl_Recv(int16_t sd, void *buf, int16_t Len, int16_t flags);
dflet 0:e89ba455dbcf 1275 #endif
dflet 0:e89ba455dbcf 1276
dflet 0:e89ba455dbcf 1277 /*!
dflet 0:e89ba455dbcf 1278 \brief read data from socket
dflet 0:e89ba455dbcf 1279
dflet 0:e89ba455dbcf 1280 function receives a message from a connection-mode or
dflet 0:e89ba455dbcf 1281 connectionless-mode socket
dflet 0:e89ba455dbcf 1282
dflet 0:e89ba455dbcf 1283 \param[in] sd socket handle
dflet 0:e89ba455dbcf 1284 \param[out] buf Points to the buffer where the message should be stored.
dflet 0:e89ba455dbcf 1285 \param[in] Len Specifies the length in bytes of the buffer pointed to by the buffer argument.
dflet 0:e89ba455dbcf 1286 Range: 1-16000 bytes
dflet 0:e89ba455dbcf 1287 \param[in] flags Specifies the type of message
dflet 0:e89ba455dbcf 1288 reception. On this version, this parameter is not
dflet 0:e89ba455dbcf 1289 supported.
dflet 0:e89ba455dbcf 1290 \param[in] from pointer to an address structure
dflet 0:e89ba455dbcf 1291 indicating the source
dflet 0:e89ba455dbcf 1292 address.\n sockaddr:\n - code
dflet 0:e89ba455dbcf 1293 for the address format. On this
dflet 0:e89ba455dbcf 1294 version only AF_INET is
dflet 0:e89ba455dbcf 1295 supported.\n - socket address,
dflet 0:e89ba455dbcf 1296 the length depends on the code
dflet 0:e89ba455dbcf 1297 format
dflet 0:e89ba455dbcf 1298 \param[in] fromlen source address structure
dflet 0:e89ba455dbcf 1299 size. This parameter MUST be set to the size of the structure pointed to by addr.
dflet 0:e89ba455dbcf 1300
dflet 0:e89ba455dbcf 1301
dflet 0:e89ba455dbcf 1302 \return return the number of bytes received,
dflet 0:e89ba455dbcf 1303 or a negative value if an error occurred.
dflet 0:e89ba455dbcf 1304 using a non-blocking recv a possible negative value is SL_EAGAIN.
dflet 0:e89ba455dbcf 1305 SL_RET_CODE_INVALID_INPUT (-2) will be returned if fromlen has incorrect length.
dflet 0:e89ba455dbcf 1306 SL_POOL_IS_EMPTY may be return in case there are no resources in the system
dflet 0:e89ba455dbcf 1307 In this case try again later or increase MAX_CONCURRENT_ACTIONS
dflet 0:e89ba455dbcf 1308
dflet 0:e89ba455dbcf 1309 \sa sl_Recv
dflet 0:e89ba455dbcf 1310 \note belongs to \ref recv_api
dflet 0:e89ba455dbcf 1311 \warning
dflet 0:e89ba455dbcf 1312 \par Example:
dflet 0:e89ba455dbcf 1313 \code An example of receiving data:
dflet 0:e89ba455dbcf 1314
dflet 0:e89ba455dbcf 1315 SlSockAddrIn_t Addr;
dflet 0:e89ba455dbcf 1316 SlSockAddrIn_t LocalAddr;
dflet 0:e89ba455dbcf 1317 int16_t AddrSize = sizeof(SlSockAddrIn_t);
dflet 0:e89ba455dbcf 1318 int16_t SockID;
dflet 0:e89ba455dbcf 1319 int16_t Status;
dflet 0:e89ba455dbcf 1320 int8_t Buf[RECV_BUF_LEN];
dflet 0:e89ba455dbcf 1321
dflet 0:e89ba455dbcf 1322 LocalAddr.sin_family = SL_AF_INET;
dflet 0:e89ba455dbcf 1323 LocalAddr.sin_port = sl_Htons(5001);
dflet 0:e89ba455dbcf 1324 LocalAddr.sin_addr.s_addr = 0;
dflet 0:e89ba455dbcf 1325
dflet 0:e89ba455dbcf 1326 SockID = sl_Socket(SL_AF_INET,SL_SOCK_DGRAM, 0);
dflet 0:e89ba455dbcf 1327 Status = sl_Bind(SockID, (SlSockAddr_t *)&LocalAddr, AddrSize);
dflet 0:e89ba455dbcf 1328 Status = sl_RecvFrom(SockID, Buf, 1472, 0, (SlSockAddr_t *)&Addr, (SlSocklen_t*)&AddrSize);
dflet 0:e89ba455dbcf 1329
dflet 0:e89ba455dbcf 1330 \endcode
dflet 0:e89ba455dbcf 1331 */
dflet 0:e89ba455dbcf 1332 #if _SL_INCLUDE_FUNC(sl_RecvFrom)
dflet 0:e89ba455dbcf 1333 int16_t sl_RecvFrom(int16_t sd, void *buf, int16_t Len, int16_t flags, SlSockAddr_t *from, SlSocklen_t *fromlen);
dflet 0:e89ba455dbcf 1334 #endif
dflet 0:e89ba455dbcf 1335
dflet 0:e89ba455dbcf 1336 /*!
dflet 0:e89ba455dbcf 1337 \brief write data to TCP socket
dflet 0:e89ba455dbcf 1338
dflet 0:e89ba455dbcf 1339 This function is used to transmit a message to another socket.
dflet 0:e89ba455dbcf 1340 Returns immediately after sending data to device.
dflet 0:e89ba455dbcf 1341 In case of TCP failure an async event SL_SOCKET_TX_FAILED_EVENT is going to
dflet 0:e89ba455dbcf 1342 be received.
dflet 0:e89ba455dbcf 1343 In case of a RAW socket (transceiver mode), extra 4 bytes should be reserved at the end of the
dflet 0:e89ba455dbcf 1344 frame data buffer for WLAN FCS
dflet 0:e89ba455dbcf 1345
dflet 0:e89ba455dbcf 1346 \param[in] sd socket handle
dflet 0:e89ba455dbcf 1347 \param[in] buf Points to a buffer containing
dflet 0:e89ba455dbcf 1348 the message to be sent
dflet 0:e89ba455dbcf 1349 \param[in] Len message size in bytes. Range: 1-1460 bytes
dflet 0:e89ba455dbcf 1350 \param[in] flags Specifies the type of message
dflet 0:e89ba455dbcf 1351 transmission. On this version, this parameter is not
dflet 0:e89ba455dbcf 1352 supported for TCP.
dflet 0:e89ba455dbcf 1353 For transceiver mode, the SL_RAW_RF_TX_PARAMS macro can be used to determine
dflet 0:e89ba455dbcf 1354 transmission parameters (channel,rate,tx_power,preamble)
dflet 0:e89ba455dbcf 1355
dflet 0:e89ba455dbcf 1356
dflet 0:e89ba455dbcf 1357 \return Return the number of bytes transmitted,
dflet 0:e89ba455dbcf 1358 or -1 if an error occurred
dflet 0:e89ba455dbcf 1359
dflet 0:e89ba455dbcf 1360 \sa sl_SendTo
dflet 0:e89ba455dbcf 1361 \note belongs to \ref send_api
dflet 0:e89ba455dbcf 1362 \warning
dflet 0:e89ba455dbcf 1363 \par Example:
dflet 0:e89ba455dbcf 1364 \code An example of sending data:
dflet 0:e89ba455dbcf 1365
dflet 0:e89ba455dbcf 1366 SlSockAddrIn_t Addr;
dflet 0:e89ba455dbcf 1367 int16_t AddrSize = sizeof(SlSockAddrIn_t);
dflet 0:e89ba455dbcf 1368 int16_t SockID;
dflet 0:e89ba455dbcf 1369 int16_t Status;
dflet 0:e89ba455dbcf 1370 int8_t Buf[SEND_BUF_LEN];
dflet 0:e89ba455dbcf 1371
dflet 0:e89ba455dbcf 1372 Addr.sin_family = SL_AF_INET;
dflet 0:e89ba455dbcf 1373 Addr.sin_port = sl_Htons(5001);
dflet 0:e89ba455dbcf 1374 Addr.sin_addr.s_addr = sl_Htonl(SL_IPV4_VAL(10,1,1,200));
dflet 0:e89ba455dbcf 1375
dflet 0:e89ba455dbcf 1376 SockID = sl_Socket(SL_AF_INET,SL_SOCK_STREAM, 0);
dflet 0:e89ba455dbcf 1377 Status = sl_Connect(SockID, (SlSockAddr_t *)&Addr, AddrSize);
dflet 0:e89ba455dbcf 1378 Status = sl_Send(SockID, Buf, 1460, 0 );
dflet 0:e89ba455dbcf 1379
dflet 0:e89ba455dbcf 1380 \endcode
dflet 0:e89ba455dbcf 1381 */
dflet 0:e89ba455dbcf 1382 #if _SL_INCLUDE_FUNC(sl_Send )
dflet 0:e89ba455dbcf 1383 int16_t sl_Send(int16_t sd, const void *buf, int16_t Len, int16_t flags);
dflet 0:e89ba455dbcf 1384 #endif
dflet 0:e89ba455dbcf 1385
dflet 0:e89ba455dbcf 1386 /*!
dflet 0:e89ba455dbcf 1387 \brief write data to socket
dflet 0:e89ba455dbcf 1388
dflet 0:e89ba455dbcf 1389 This function is used to transmit a message to another socket
dflet 0:e89ba455dbcf 1390 (connection less socket SOCK_DGRAM, SOCK_RAW).
dflet 0:e89ba455dbcf 1391 Returns immediately after sending data to device.
dflet 0:e89ba455dbcf 1392 In case of transmission failure an async event SL_SOCKET_TX_FAILED_EVENT is going to
dflet 0:e89ba455dbcf 1393 be received.
dflet 0:e89ba455dbcf 1394
dflet 0:e89ba455dbcf 1395 \param[in] sd socket handle
dflet 0:e89ba455dbcf 1396 \param[in] buf Points to a buffer containing
dflet 0:e89ba455dbcf 1397 the message to be sent
dflet 0:e89ba455dbcf 1398 \param[in] Len message size in bytes. Range: 1-1460 bytes
dflet 0:e89ba455dbcf 1399 \param[in] flags Specifies the type of message
dflet 0:e89ba455dbcf 1400 transmission. On this version, this parameter is not
dflet 0:e89ba455dbcf 1401 supported
dflet 0:e89ba455dbcf 1402 \param[in] to pointer to an address structure
dflet 0:e89ba455dbcf 1403 indicating the destination
dflet 0:e89ba455dbcf 1404 address.\n sockaddr:\n - code
dflet 0:e89ba455dbcf 1405 for the address format. On this
dflet 0:e89ba455dbcf 1406 version only AF_INET is
dflet 0:e89ba455dbcf 1407 supported.\n - socket address,
dflet 0:e89ba455dbcf 1408 the length depends on the code
dflet 0:e89ba455dbcf 1409 format
dflet 0:e89ba455dbcf 1410 \param[in] tolen destination address structure size
dflet 0:e89ba455dbcf 1411
dflet 0:e89ba455dbcf 1412 \return Return the number of transmitted bytes,
dflet 0:e89ba455dbcf 1413 or -1 if an error occurred
dflet 0:e89ba455dbcf 1414
dflet 0:e89ba455dbcf 1415 \sa sl_Send
dflet 0:e89ba455dbcf 1416 \note belongs to \ref send_api
dflet 0:e89ba455dbcf 1417 \warning
dflet 0:e89ba455dbcf 1418 \par Example:
dflet 0:e89ba455dbcf 1419 \code An example of sending data:
dflet 0:e89ba455dbcf 1420
dflet 0:e89ba455dbcf 1421 SlSockAddrIn_t Addr;
dflet 0:e89ba455dbcf 1422 int16_t AddrSize = sizeof(SlSockAddrIn_t);
dflet 0:e89ba455dbcf 1423 int16_t SockID;
dflet 0:e89ba455dbcf 1424 int16_t Status;
dflet 0:e89ba455dbcf 1425 int8_t Buf[SEND_BUF_LEN];
dflet 0:e89ba455dbcf 1426
dflet 0:e89ba455dbcf 1427 Addr.sin_family = SL_AF_INET;
dflet 0:e89ba455dbcf 1428 Addr.sin_port = sl_Htons(5001);
dflet 0:e89ba455dbcf 1429 Addr.sin_addr.s_addr = sl_Htonl(SL_IPV4_VAL(10,1,1,200));
dflet 0:e89ba455dbcf 1430
dflet 0:e89ba455dbcf 1431 SockID = sl_Socket(SL_AF_INET,SL_SOCK_DGRAM, 0);
dflet 0:e89ba455dbcf 1432 Status = sl_SendTo(SockID, Buf, 1472, 0, (SlSockAddr_t *)&Addr, AddrSize);
dflet 0:e89ba455dbcf 1433
dflet 0:e89ba455dbcf 1434 \endcode
dflet 0:e89ba455dbcf 1435 */
dflet 0:e89ba455dbcf 1436 #if _SL_INCLUDE_FUNC(sl_SendTo)
dflet 0:e89ba455dbcf 1437 int16_t sl_SendTo(int16_t sd, const void *buf, int16_t Len, int16_t flags, const SlSockAddr_t *to, SlSocklen_t tolen);
dflet 0:e89ba455dbcf 1438 #endif
dflet 0:e89ba455dbcf 1439
dflet 0:e89ba455dbcf 1440 /*!
dflet 0:e89ba455dbcf 1441 \brief Reorder the bytes of a 32-bit unsigned value
dflet 0:e89ba455dbcf 1442
dflet 0:e89ba455dbcf 1443 This function is used to Reorder the bytes of a 32-bit unsigned value from processor order to network order.
dflet 0:e89ba455dbcf 1444
dflet 0:e89ba455dbcf 1445 \param[in] var variable to reorder
dflet 0:e89ba455dbcf 1446
dflet 0:e89ba455dbcf 1447 \return Return the reorder variable,
dflet 0:e89ba455dbcf 1448
dflet 0:e89ba455dbcf 1449 \sa sl_SendTo sl_Bind sl_Connect sl_RecvFrom sl_Accept
dflet 0:e89ba455dbcf 1450 \note belongs to \ref send_api
dflet 0:e89ba455dbcf 1451 \warning
dflet 0:e89ba455dbcf 1452 */
dflet 0:e89ba455dbcf 1453 #if _SL_INCLUDE_FUNC(sl_Htonl )
dflet 0:e89ba455dbcf 1454 uint32_t sl_Htonl( uint32_t val );
dflet 0:e89ba455dbcf 1455
dflet 0:e89ba455dbcf 1456 #define sl_Ntohl sl_Htonl /* Reorder the bytes of a 16-bit unsigned value from network order to processor orde. */
dflet 0:e89ba455dbcf 1457 #endif
dflet 0:e89ba455dbcf 1458
dflet 0:e89ba455dbcf 1459 /*!
dflet 0:e89ba455dbcf 1460 \brief Reorder the bytes of a 16-bit unsigned value
dflet 0:e89ba455dbcf 1461
dflet 0:e89ba455dbcf 1462 This function is used to Reorder the bytes of a 16-bit unsigned value from processor order to network order.
dflet 0:e89ba455dbcf 1463
dflet 0:e89ba455dbcf 1464 \param[in] var variable to reorder
dflet 0:e89ba455dbcf 1465
dflet 0:e89ba455dbcf 1466 \return Return the reorder variable,
dflet 0:e89ba455dbcf 1467
dflet 0:e89ba455dbcf 1468 \sa sl_SendTo sl_Bind sl_Connect sl_RecvFrom sl_Accept
dflet 0:e89ba455dbcf 1469 \note belongs to \ref send_api
dflet 0:e89ba455dbcf 1470 \warning
dflet 0:e89ba455dbcf 1471 */
dflet 0:e89ba455dbcf 1472 #if _SL_INCLUDE_FUNC(sl_Htons )
dflet 0:e89ba455dbcf 1473 uint16_t sl_Htons( uint16_t val );
dflet 0:e89ba455dbcf 1474
dflet 0:e89ba455dbcf 1475 #define sl_Ntohs sl_Htons /* Reorder the bytes of a 16-bit unsigned value from network order to processor orde. */
dflet 0:e89ba455dbcf 1476 #endif
dflet 0:e89ba455dbcf 1477
dflet 0:e89ba455dbcf 1478 private:
dflet 0:e89ba455dbcf 1479
dflet 0:e89ba455dbcf 1480 cc3100_driver &_driver;
dflet 0:e89ba455dbcf 1481 cc3100_nonos &_nonos;
dflet 0:e89ba455dbcf 1482
dflet 0:e89ba455dbcf 1483 };//class
dflet 0:e89ba455dbcf 1484
dflet 0:e89ba455dbcf 1485
dflet 0:e89ba455dbcf 1486 }//namespace mbed_cc3100
dflet 0:e89ba455dbcf 1487
dflet 0:e89ba455dbcf 1488 /*!
dflet 0:e89ba455dbcf 1489
dflet 0:e89ba455dbcf 1490 Close the Doxygen group.
dflet 0:e89ba455dbcf 1491 @}
dflet 0:e89ba455dbcf 1492
dflet 0:e89ba455dbcf 1493 */
dflet 0:e89ba455dbcf 1494
dflet 0:e89ba455dbcf 1495 #endif /* __SOCKET_H__ */
dflet 0:e89ba455dbcf 1496
dflet 0:e89ba455dbcf 1497
dflet 0:e89ba455dbcf 1498