Arnaud VALLEY / Mbed 2 deprecated Pinscape_Controller_V2_arnoz

Mirror with some correction

Dependencies:   mbed FastIO FastPWM USBDevice

Revisions of config.h

Revision Date Message Actions
55:4db125cd11a0 2016-05-04 More KL25Z USB client cleanup File  Diff  Annotate
54:fd77a6b2f76c 2016-04-30 TLC5940 with SPI DMA setup in interrupt handler (not quite working) File  Diff  Annotate
53:9b2611964afc 2016-04-22 Save some debugging instrumentation to be removed for release File  Diff  Annotate
52:8298b2a73eb2 2016-03-05 New calibration procedure - attempt #1, with separate calibration release sensingi File  Diff  Annotate
51:57eb311faafa 2016-03-01 Saving old CCD processing modes File  Diff  Annotate
48:058ace2aed1d 2016-02-26 New plunger processing 1 File  Diff  Annotate
44:b5ac89b9cd5d 2016-02-07 Work in progress on CCD speed-ups File  Diff  Annotate
43:7a6364d82a41 2016-02-06 Before floating point plunger ranging File  Diff  Annotate
40:cc0d9814522b 2016-02-03 Gamma correction option for outputs; work in progress on new config program File  Diff  Annotate
39:b3815a1c3802 2016-01-11 USB fixes; accelerometer auto un-sticking with watchdog timer. File  Diff  Annotate
38:091e511ce8a0 2016-01-05 USB improvements File  Diff  Annotate
35:e959ffba78fd 2015-12-19 Keyboard/Media Control interface working, but the extra interface confuses the DOF connector. File  Diff  Annotate
34:6b981a2afab7 2015-12-03 74HC595 output port extensions (for "chime board") File  Diff  Annotate
33:d832bcab089e 2015-10-21 With expansion board 5940 "power enable" output; saving this feature, which is to be removed. File  Diff  Annotate
32:cbff13b98441 2015-09-26 Fix config.h for release version File  Diff  Annotate
30:6e9902f06f48 2015-09-25 Use DMA for TLC5940 SPI transfer to reduce time interrupt handler (fixes problem with MMA8415Q freezing up). All LedWiz flashing modes now fully supported. File  Diff  Annotate
29:582472d0bc57 2015-09-25 Test of direct bit writes instead of SPI. File  Diff  Annotate
28:2097c6f8f2db 2015-09-23 A few more tweaks in the TLC5940 setup. File  Diff  Annotate
27:26de4b0917a7 2015-09-23 Disable TLC5940 by default. File  Diff  Annotate
26:cb71c4af2912 2015-09-23 Initial TLC5940 PWM controller chip support. File  Diff  Annotate
25:e22b88bd783a 2015-09-01 Centralized the CCD pixel count setting to a single config.h option; added an option to config.h to select the board's mounting orientation for the accelerometer File  Diff  Annotate
24:e902bc7cdc1e 2015-06-03 Restored CCD sensor as the default sensor in config.h File  Diff  Annotate
23:14f8c5004cd0 2015-06-03 Use regular AnalogIn (not FastAnalogIn) for potentiometer readings, and take the average of several readings, to reduce noise; add a minimum distance threshold before a firing event when crossing the rest position. File  Diff  Annotate
21:5048e16cc9ef 2015-03-28 New No-Joystick configuration option (for secondary devices that only act as output controllers) File  Diff  Annotate
18:5e890ebd0023 2015-02-27 Old debounce about to be removed File  Diff  Annotate
17:ab3cec0c8bf4 2015-02-27 FastIO and FastAnalogIn; better firing event sensing; potentiometer plunger sensor option; new key debouncing; ZB Launch Ball feature File  Diff  Annotate