Arnaud VALLEY / Mbed 2 deprecated Pinscape_Controller_V2_arnoz

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Dependencies:   mbed FastIO FastPWM USBDevice

config.h@66:2e3583fbd2f4, 2016-11-27 (annotated)

Committer:
mjr
Date:
Sun Nov 27 06:37:47 2016 +0000
Revision:
66:2e3583fbd2f4
Parent:
65:739875521aae
Child:
67:c39e66c4e000
Add "local shift button", which allows each physical button to have two key mappings (normal and shifted)

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mjr 17:ab3cec0c8bf4 1 // Pinscape Controller Configuration
mjr 17:ab3cec0c8bf4 2 //
mjr 55:4db125cd11a0 3 // New for 2016: dynamic configuration! To configure the controller,
mjr 55:4db125cd11a0 4 // connect the KL25Z to your PC, install the STANDARD pre-compiled .bin
mjr 55:4db125cd11a0 5 // file, and run the Windows config tool. There's no need (as there was in
mjr 55:4db125cd11a0 6 // the past) to edit the source code or to compile a custom version of the
mjr 55:4db125cd11a0 7 // binary just to customize setup options.
mjr 35:e959ffba78fd 8 //
mjr 55:4db125cd11a0 9 // In earlier versions, configuration was handled mostly with #ifdef and
mjr 55:4db125cd11a0 10 // similar constructs. To customize the setup, you had to create a private
mjr 55:4db125cd11a0 11 // forked copy of the source code, edit the constants defined in config.h,
mjr 55:4db125cd11a0 12 // and compile a custom binary. That's no longer necessary!
mjr 35:e959ffba78fd 13 //
mjr 35:e959ffba78fd 14 // The new approach is to do everything (or as much as possible, anyway)
mjr 35:e959ffba78fd 15 // via the Windows config tool. You shouldn't have to recompile a custom
mjr 35:e959ffba78fd 16 // version just to make a configurable change. Of course, you're still free
mjr 55:4db125cd11a0 17 // to create a custom version if you want to add entirely new features or
mjr 55:4db125cd11a0 18 // make changes that go beyond what the setup tool exposes.
mjr 35:e959ffba78fd 19 //
mjr 35:e959ffba78fd 20
mjr 55:4db125cd11a0 21 // Pre-packaged configuration selection.
mjr 55:4db125cd11a0 22 //
mjr 55:4db125cd11a0 23 // IMPORTANT! If you just want to create a custom configuration, DON'T
mjr 55:4db125cd11a0 24 // modify this file, DON'T use these macros, and DON'T compiler on mbed.
mjr 55:4db125cd11a0 25 // Instead, use the unmodified standard build and configure your system
mjr 55:4db125cd11a0 26 // using the Pinscape Config Tool on Windows. That's easier and better
mjr 55:4db125cd11a0 27 // because the config tool will be able to back up your settings to a
mjr 55:4db125cd11a0 28 // local file on your PC, and will automatically preserve your settings
mjr 55:4db125cd11a0 29 // across upgrades. You won't have to worry about merging your changes
mjr 55:4db125cd11a0 30 // into every update of the repository source code, since you'll never
mjr 55:4db125cd11a0 31 // have to change the source code.
mjr 55:4db125cd11a0 32 //
mjr 55:4db125cd11a0 33 // The different configurations here are purely for testing purposes.
mjr 55:4db125cd11a0 34 // The standard build uses the STANDARD_CONFIG settings, which are the
mjr 55:4db125cd11a0 35 // same as the original version where you had to modify config.h by hand
mjr 55:4db125cd11a0 36 // to customize your system.
mjr 55:4db125cd11a0 37 //
mjr 55:4db125cd11a0 38 #define STANDARD_CONFIG 1 // standard settings, based on v1 base settings
mjr 55:4db125cd11a0 39 #define TEST_CONFIG_EXPAN 0 // configuration for the expansion boards
mjr 55:4db125cd11a0 40 #define TEST_KEEP_PRINTF 0 // for debugging purposes, keep printf() enabled
mjr 55:4db125cd11a0 41 // by leaving the SDA UART GPIO pins unallocated
mjr 48:058ace2aed1d 42
mjr 17:ab3cec0c8bf4 43
mjr 25:e22b88bd783a 44 #ifndef CONFIG_H
mjr 25:e22b88bd783a 45 #define CONFIG_H
mjr 17:ab3cec0c8bf4 46
mjr 35:e959ffba78fd 47 // Plunger type codes
mjr 35:e959ffba78fd 48 // NOTE! These values are part of the external USB interface. New
mjr 35:e959ffba78fd 49 // values can be added, but the meaning of an existing assigned number
mjr 35:e959ffba78fd 50 // should remain fixed to keep the PC-side config tool compatible across
mjr 35:e959ffba78fd 51 // versions.
mjr 35:e959ffba78fd 52 const int PlungerType_None = 0; // no plunger
mjr 35:e959ffba78fd 53 const int PlungerType_TSL1410RS = 1; // TSL1410R linear image sensor (1280x1 pixels, 400dpi), serial mode
mjr 35:e959ffba78fd 54 const int PlungerType_TSL1410RP = 2; // TSL1410R, parallel mode (reads the two sensor sections concurrently)
mjr 35:e959ffba78fd 55 const int PlungerType_TSL1412RS = 3; // TSL1412R linear image sensor (1536x1 pixels, 400dpi), serial mode
mjr 35:e959ffba78fd 56 const int PlungerType_TSL1412RP = 4; // TSL1412R, parallel mode
mjr 35:e959ffba78fd 57 const int PlungerType_Pot = 5; // potentionmeter
mjr 35:e959ffba78fd 58 const int PlungerType_OptQuad = 6; // AEDR8300 optical quadrature sensor
mjr 35:e959ffba78fd 59 const int PlungerType_MagQuad = 7; // AS5304 magnetic quadrature sensor
mjr 21:5048e16cc9ef 60
mjr 35:e959ffba78fd 61 // Accelerometer orientation codes
mjr 35:e959ffba78fd 62 // These values are part of the external USB interface
mjr 35:e959ffba78fd 63 const int OrientationFront = 0; // USB ports pointed toward front of cabinet
mjr 35:e959ffba78fd 64 const int OrientationLeft = 1; // ports pointed toward left side of cabinet
mjr 35:e959ffba78fd 65 const int OrientationRight = 2; // ports pointed toward right side of cabinet
mjr 35:e959ffba78fd 66 const int OrientationRear = 3; // ports pointed toward back of cabinet
mjr 25:e22b88bd783a 67
mjr 35:e959ffba78fd 68 // input button types
mjr 53:9b2611964afc 69 const int BtnTypeNone = 0; // unused
mjr 35:e959ffba78fd 70 const int BtnTypeJoystick = 1; // joystick button
mjr 53:9b2611964afc 71 const int BtnTypeKey = 2; // keyboard key
mjr 38:091e511ce8a0 72
mjr 38:091e511ce8a0 73 // input button flags
mjr 38:091e511ce8a0 74 const uint8_t BtnFlagPulse = 0x01; // pulse mode - reports each change in the physical switch state
mjr 38:091e511ce8a0 75 // as a brief press of the logical button/keyboard key
mjr 40:cc0d9814522b 76
mjr 40:cc0d9814522b 77 // button setup structure
mjr 40:cc0d9814522b 78 struct ButtonCfg
mjr 40:cc0d9814522b 79 {
mjr 66:2e3583fbd2f4 80 // physical GPIO pin - a Wire-to-PinName mapping index
mjr 66:2e3583fbd2f4 81 uint8_t pin;
mjr 66:2e3583fbd2f4 82
mjr 66:2e3583fbd2f4 83 // Key type and value reported to the PC
mjr 40:cc0d9814522b 84 uint8_t typ; // key type reported to PC - a BtnTypeXxx value
mjr 53:9b2611964afc 85 uint8_t val; // key value reported - meaning depends on 'typ' value:
mjr 53:9b2611964afc 86 // none -> no PC input reports (val is unused)
mjr 53:9b2611964afc 87 // joystick -> val is joystick button number (1..32)
mjr 53:9b2611964afc 88 // keyboard -> val is USB scan code
mjr 66:2e3583fbd2f4 89
mjr 66:2e3583fbd2f4 90 // Shifted key type and value. These used when the button is pressed
mjr 66:2e3583fbd2f4 91 // while the Local Shift Button is being held down. We send the key
mjr 66:2e3583fbd2f4 92 // code given here instead of the regular typ/val code in this case.
mjr 66:2e3583fbd2f4 93 // If typ2 is BtnTypeNone, we use the regular typ/val code whether or
mjr 66:2e3583fbd2f4 94 // not the shift button is being held.
mjr 66:2e3583fbd2f4 95 uint8_t typ2; // shifted key type
mjr 66:2e3583fbd2f4 96 uint8_t val2; // shifted key value
mjr 66:2e3583fbd2f4 97
mjr 66:2e3583fbd2f4 98 // key flags - a bitwise combination of BtnFlagXxx values
mjr 66:2e3583fbd2f4 99 uint8_t flags;
mjr 40:cc0d9814522b 100
mjr 40:cc0d9814522b 101 void set(uint8_t pin, uint8_t typ, uint8_t val, uint8_t flags = 0)
mjr 40:cc0d9814522b 102 {
mjr 40:cc0d9814522b 103 this->pin = pin;
mjr 40:cc0d9814522b 104 this->typ = typ;
mjr 40:cc0d9814522b 105 this->val = val;
mjr 40:cc0d9814522b 106 this->flags = flags;
mjr 40:cc0d9814522b 107 }
mjr 40:cc0d9814522b 108
mjr 40:cc0d9814522b 109 } __attribute__((packed));
mjr 40:cc0d9814522b 110
mjr 33:d832bcab089e 111
mjr 65:739875521aae 112 // maximum number of input button mappings in configuration
mjr 65:739875521aae 113 const int MAX_BUTTONS = 48;
mjr 65:739875521aae 114
mjr 65:739875521aae 115 // extra slots for virtual buttons (ZB Launch Ball)
mjr 65:739875521aae 116 const int VIRTUAL_BUTTONS = 1; // total number of buttons
mjr 65:739875521aae 117 const int ZBL_BUTTON_CFG = MAX_BUTTONS; // index of ZB Launch Ball slot
mjr 33:d832bcab089e 118
mjr 35:e959ffba78fd 119 // LedWiz output port type codes
mjr 35:e959ffba78fd 120 // These values are part of the external USB interface
mjr 35:e959ffba78fd 121 const int PortTypeDisabled = 0; // port is disabled - not visible to LedWiz/DOF host
mjr 35:e959ffba78fd 122 const int PortTypeGPIOPWM = 1; // GPIO port, PWM enabled
mjr 35:e959ffba78fd 123 const int PortTypeGPIODig = 2; // GPIO port, digital out
mjr 35:e959ffba78fd 124 const int PortTypeTLC5940 = 3; // TLC5940 port
mjr 35:e959ffba78fd 125 const int PortType74HC595 = 4; // 74HC595 port
mjr 53:9b2611964afc 126 const int PortTypeVirtual = 5; // Virtual port - visible to host software, but not connected
mjr 53:9b2611964afc 127 // to a physical output
mjr 17:ab3cec0c8bf4 128
mjr 35:e959ffba78fd 129 // LedWiz output port flag bits
mjr 38:091e511ce8a0 130 const uint8_t PortFlagActiveLow = 0x01; // physical output is active-low
mjr 38:091e511ce8a0 131 const uint8_t PortFlagNoisemaker = 0x02; // noisemaker device - disable when night mode is engaged
mjr 40:cc0d9814522b 132 const uint8_t PortFlagGamma = 0x04; // apply gamma correction to this output
mjr 35:e959ffba78fd 133
mjr 35:e959ffba78fd 134 // maximum number of output ports
mjr 48:058ace2aed1d 135 const int MAX_OUT_PORTS = 128;
mjr 33:d832bcab089e 136
mjr 38:091e511ce8a0 137 // port configuration data
mjr 38:091e511ce8a0 138 struct LedWizPortCfg
mjr 38:091e511ce8a0 139 {
mjr 38:091e511ce8a0 140 uint8_t typ; // port type: a PortTypeXxx value
mjr 38:091e511ce8a0 141 uint8_t pin; // physical output pin: for a GPIO port, this is an index in the
mjr 38:091e511ce8a0 142 // USB-to-PinName mapping list; for a TLC5940 or 74HC595 port, it's
mjr 38:091e511ce8a0 143 // the output number, starting from 0 for OUT0 on the first chip in
mjr 38:091e511ce8a0 144 // the daisy chain. For inactive and virtual ports, it's unused.
mjr 38:091e511ce8a0 145 uint8_t flags; // flags: a combination of PortFlagXxx values
mjr 40:cc0d9814522b 146
mjr 40:cc0d9814522b 147 void set(uint8_t typ, uint8_t pin, uint8_t flags = 0)
mjr 40:cc0d9814522b 148 {
mjr 40:cc0d9814522b 149 this->typ = typ;
mjr 40:cc0d9814522b 150 this->pin = pin;
mjr 40:cc0d9814522b 151 this->flags = flags;
mjr 40:cc0d9814522b 152 }
mjr 40:cc0d9814522b 153
mjr 38:091e511ce8a0 154 } __attribute__((packed));
mjr 38:091e511ce8a0 155
mjr 38:091e511ce8a0 156
mjr 53:9b2611964afc 157 // Convert a physical pin name to a wire pin name
mjr 53:9b2611964afc 158 #define PINNAME_TO_WIRE(p) \
mjr 53:9b2611964afc 159 uint8_t((p) == NC ? 0xFF : \
mjr 53:9b2611964afc 160 (((p) & 0xF000 ) >> (PORT_SHIFT - 5)) | (((p) & 0xFF) >> 2))
mjr 53:9b2611964afc 161
mjr 35:e959ffba78fd 162 struct Config
mjr 35:e959ffba78fd 163 {
mjr 35:e959ffba78fd 164 // set all values to factory defaults
mjr 35:e959ffba78fd 165 void setFactoryDefaults()
mjr 35:e959ffba78fd 166 {
mjr 35:e959ffba78fd 167 // By default, pretend to be LedWiz unit #8. This can be from 1 to 16. Real
mjr 35:e959ffba78fd 168 // LedWiz units have their unit number set at the factory, and the vast majority
mjr 35:e959ffba78fd 169 // are set up as unit #1, since that's the default for anyone who doesn't ask
mjr 35:e959ffba78fd 170 // for a different setting. It seems rare for anyone to use more than one unit
mjr 35:e959ffba78fd 171 // in a pin cab, but for the few who do, the others will probably be numbered
mjr 35:e959ffba78fd 172 // sequentially as #2, #3, etc. It seems safe to assume that no one out there
mjr 48:058ace2aed1d 173 // has a unit #8, so we'll use that as our default. This can be changed from
mjr 48:058ace2aed1d 174 // the config tool, but for the sake of convenience, it's better to pick a
mjr 48:058ace2aed1d 175 // default that most people won't have to change.
mjr 54:fd77a6b2f76c 176 usbVendorID = 0xFAFA; // LedWiz vendor code
mjr 48:058ace2aed1d 177 usbProductID = 0x00F7; // LedWiz product code for unit #8
mjr 61:3c7e6e9ec355 178
mjr 55:4db125cd11a0 179 // Set the default Pinscape unit number to #1. This is a separate identifier
mjr 55:4db125cd11a0 180 // from the LedWiz ID, so you don't have to worry about making this different
mjr 55:4db125cd11a0 181 // from your LedWiz units. Each Pinscape unit should have a unique value for
mjr 55:4db125cd11a0 182 // this ID, though.
mjr 55:4db125cd11a0 183 //
mjr 55:4db125cd11a0 184 // Note that Pinscape unit #1 corresponds to DOF Pinscape #51, PS 2 -> DOF 52,
mjr 55:4db125cd11a0 185 // and so on - just add 50 to get the DOF ID.
mjr 55:4db125cd11a0 186 psUnitNo = 1;
mjr 35:e959ffba78fd 187
mjr 51:57eb311faafa 188 // set a disconnect reboot timeout of 10 seconds by default
mjr 55:4db125cd11a0 189 disconnectRebootTimeout = 10;
mjr 51:57eb311faafa 190
mjr 35:e959ffba78fd 191 // enable joystick reports
mjr 35:e959ffba78fd 192 joystickEnabled = true;
mjr 35:e959ffba78fd 193
mjr 35:e959ffba78fd 194 // assume standard orientation, with USB ports toward front of cabinet
mjr 35:e959ffba78fd 195 orientation = OrientationFront;
mjr 25:e22b88bd783a 196
mjr 52:8298b2a73eb2 197 // assume a basic setup with no expansion boards
mjr 53:9b2611964afc 198 expan.typ = 0;
mjr 53:9b2611964afc 199 expan.vsn = 0;
mjr 53:9b2611964afc 200 memset(expan.ext, 0, sizeof(expan.ext));
mjr 52:8298b2a73eb2 201
mjr 35:e959ffba78fd 202 // assume no plunger is attached
mjr 35:e959ffba78fd 203 plunger.enabled = false;
mjr 35:e959ffba78fd 204 plunger.sensorType = PlungerType_None;
mjr 35:e959ffba78fd 205
mjr 55:4db125cd11a0 206 #if TEST_CONFIG_EXPAN || STANDARD_CONFIG
mjr 43:7a6364d82a41 207 plunger.enabled = true;
mjr 43:7a6364d82a41 208 plunger.sensorType = PlungerType_TSL1410RS;
mjr 53:9b2611964afc 209 plunger.sensorPin[0] = PINNAME_TO_WIRE(PTE20); // SI
mjr 53:9b2611964afc 210 plunger.sensorPin[1] = PINNAME_TO_WIRE(PTE21); // SCLK
mjr 53:9b2611964afc 211 plunger.sensorPin[2] = PINNAME_TO_WIRE(PTB0); // AO1 = PTB0 = ADC0_SE8
mjr 53:9b2611964afc 212 plunger.sensorPin[3] = PINNAME_TO_WIRE(PTE22); // AO2 (parallel mode) = PTE22 = ADC0_SE3
mjr 43:7a6364d82a41 213 #endif
mjr 43:7a6364d82a41 214
mjr 48:058ace2aed1d 215 // default plunger calibration button settings
mjr 55:4db125cd11a0 216 plunger.cal.features = 0x03; // 0x01 = enable button, 0x02 = enable indicator lamp
mjr 55:4db125cd11a0 217 plunger.cal.btn = PINNAME_TO_WIRE(PTE29); // button input (DigitalIn port)
mjr 55:4db125cd11a0 218 plunger.cal.led = PINNAME_TO_WIRE(PTE23); // button output (DigitalOut port)
mjr 35:e959ffba78fd 219
mjr 44:b5ac89b9cd5d 220 // set the default plunger calibration
mjr 44:b5ac89b9cd5d 221 plunger.cal.setDefaults();
mjr 35:e959ffba78fd 222
mjr 35:e959ffba78fd 223 // disable the ZB Launch Ball by default
mjr 53:9b2611964afc 224 plunger.zbLaunchBall.port = 0; // 0 = disabled
mjr 65:739875521aae 225 plunger.zbLaunchBall.keytype = BtnTypeKey; // keyboard key
mjr 61:3c7e6e9ec355 226 plunger.zbLaunchBall.keycode = 0x28; // USB keyboard scan code for Enter key
mjr 61:3c7e6e9ec355 227 plunger.zbLaunchBall.pushDistance = 63; // 63/1000 in == .063" == about 1/16"
mjr 35:e959ffba78fd 228
mjr 35:e959ffba78fd 229 // assume no TV ON switch
mjr 53:9b2611964afc 230 TVON.statusPin = PINNAME_TO_WIRE(NC);
mjr 53:9b2611964afc 231 TVON.latchPin = PINNAME_TO_WIRE(NC);
mjr 53:9b2611964afc 232 TVON.relayPin = PINNAME_TO_WIRE(NC);
mjr 53:9b2611964afc 233 TVON.delayTime = 700; // 7 seconds
mjr 55:4db125cd11a0 234
mjr 55:4db125cd11a0 235 #if TEST_CONFIG_EXPAN
mjr 55:4db125cd11a0 236 // expansion board TV ON wiring
mjr 53:9b2611964afc 237 TVON.statusPin = PINNAME_TO_WIRE(PTD2);
mjr 53:9b2611964afc 238 TVON.latchPin = PINNAME_TO_WIRE(PTE0);
mjr 53:9b2611964afc 239 TVON.relayPin = PINNAME_TO_WIRE(PTD3);
mjr 53:9b2611964afc 240 TVON.delayTime = 700; // 7 seconds
mjr 38:091e511ce8a0 241 #endif
mjr 53:9b2611964afc 242
mjr 53:9b2611964afc 243 // assume no night mode switch or indicator lamp
mjr 53:9b2611964afc 244 nightMode.btn = 0;
mjr 53:9b2611964afc 245 nightMode.flags = 0;
mjr 53:9b2611964afc 246 nightMode.port = 0;
mjr 35:e959ffba78fd 247
mjr 35:e959ffba78fd 248 // assume no TLC5940 chips
mjr 35:e959ffba78fd 249 tlc5940.nchips = 0;
mjr 55:4db125cd11a0 250
mjr 55:4db125cd11a0 251 #if TEST_CONFIG_EXPAN
mjr 55:4db125cd11a0 252 // for expansion board testing purposes, assume the common setup
mjr 55:4db125cd11a0 253 // with one main board and one power board
mjr 48:058ace2aed1d 254 tlc5940.nchips = 4;
mjr 38:091e511ce8a0 255 #endif
mjr 38:091e511ce8a0 256
mjr 55:4db125cd11a0 257 // Default TLC5940 pin assignments. Note that it's harmless to set
mjr 55:4db125cd11a0 258 // these to valid pins even if no TLC5940 chips are actually present,
mjr 55:4db125cd11a0 259 // since the main program won't allocate the connections if 'nchips'
mjr 55:4db125cd11a0 260 // is zero. This means that the pins are free to be used for other
mjr 55:4db125cd11a0 261 // purposes (such as output ports) if not using TLC5940 chips.
mjr 53:9b2611964afc 262 tlc5940.sin = PINNAME_TO_WIRE(PTC6);
mjr 53:9b2611964afc 263 tlc5940.sclk = PINNAME_TO_WIRE(PTC5);
mjr 53:9b2611964afc 264 tlc5940.xlat = PINNAME_TO_WIRE(PTC10);
mjr 59:94eb9265b6d7 265 tlc5940.blank = PINNAME_TO_WIRE(PTC7);
mjr 59:94eb9265b6d7 266 #if TEST_KEEP_PRINTF
mjr 59:94eb9265b6d7 267 tlc5940.gsclk = PINNAME_TO_WIRE(PTA13); // PTA1 is reserved for SDA printf()
mjr 59:94eb9265b6d7 268 #else
mjr 53:9b2611964afc 269 tlc5940.gsclk = PINNAME_TO_WIRE(PTA1);
mjr 59:94eb9265b6d7 270 #endif
mjr 35:e959ffba78fd 271
mjr 35:e959ffba78fd 272 // assume no 74HC595 chips
mjr 35:e959ffba78fd 273 hc595.nchips = 0;
mjr 55:4db125cd11a0 274
mjr 55:4db125cd11a0 275 #if TEST_CONFIG_EXPAN
mjr 55:4db125cd11a0 276 // for expansion board testing purposes, assume one chime board
mjr 48:058ace2aed1d 277 hc595.nchips = 1;
mjr 40:cc0d9814522b 278 #endif
mjr 40:cc0d9814522b 279
mjr 55:4db125cd11a0 280 // Default 74HC595 pin assignments. As with the TLC5940 pins, it's
mjr 55:4db125cd11a0 281 // harmless to assign pins here even if no 74HC595 chips are used,
mjr 55:4db125cd11a0 282 // since the main program won't actually allocate the pins if 'nchips'
mjr 55:4db125cd11a0 283 // is zero.
mjr 53:9b2611964afc 284 hc595.sin = PINNAME_TO_WIRE(PTA5);
mjr 53:9b2611964afc 285 hc595.sclk = PINNAME_TO_WIRE(PTA4);
mjr 53:9b2611964afc 286 hc595.latch = PINNAME_TO_WIRE(PTA12);
mjr 53:9b2611964afc 287 hc595.ena = PINNAME_TO_WIRE(PTD4);
mjr 38:091e511ce8a0 288
mjr 35:e959ffba78fd 289 // initially configure with no LedWiz output ports
mjr 35:e959ffba78fd 290 outPort[0].typ = PortTypeDisabled;
mjr 66:2e3583fbd2f4 291
mjr 66:2e3583fbd2f4 292 // initially configure with no shift key
mjr 66:2e3583fbd2f4 293 shiftButton = 0;
mjr 53:9b2611964afc 294
mjr 35:e959ffba78fd 295 // initially configure with no input buttons
mjr 35:e959ffba78fd 296 for (int i = 0 ; i < MAX_BUTTONS ; ++i)
mjr 53:9b2611964afc 297 button[i].set(PINNAME_TO_WIRE(NC), BtnTypeNone, 0);
mjr 38:091e511ce8a0 298
mjr 55:4db125cd11a0 299 #if STANDARD_CONFIG | TEST_CONFIG_EXPAN
mjr 55:4db125cd11a0 300 // For the standard configuration, assign 24 input ports to
mjr 55:4db125cd11a0 301 // joystick buttons 1-24. Assign the same GPIO pins used
mjr 55:4db125cd11a0 302 // in the original v1 default configuration. For expansion
mjr 55:4db125cd11a0 303 // board testing purposes, also assign the input ports, with
mjr 55:4db125cd11a0 304 // the noted differences.
mjr 38:091e511ce8a0 305 for (int i = 0 ; i < 24 ; ++i) {
mjr 55:4db125cd11a0 306 static const int bp[] = {
mjr 53:9b2611964afc 307 PINNAME_TO_WIRE(PTC2), // 1
mjr 53:9b2611964afc 308 PINNAME_TO_WIRE(PTB3), // 2
mjr 53:9b2611964afc 309 PINNAME_TO_WIRE(PTB2), // 3
mjr 53:9b2611964afc 310 PINNAME_TO_WIRE(PTB1), // 4
mjr 53:9b2611964afc 311 PINNAME_TO_WIRE(PTE30), // 5
mjr 48:058ace2aed1d 312 #if TEST_CONFIG_EXPAN
mjr 55:4db125cd11a0 313 PINNAME_TO_WIRE(PTC11), // 6 - expansion boards use PTC11 for this, since PTE22
mjr 55:4db125cd11a0 314 // is reserved for a plunger connection
mjr 55:4db125cd11a0 315 #elif STANDARD_CONFIG
mjr 55:4db125cd11a0 316 PINNAME_TO_WIRE(PTE22), // 6 - original standalone setup uses PTE22
mjr 48:058ace2aed1d 317 #endif
mjr 53:9b2611964afc 318 PINNAME_TO_WIRE(PTE5), // 7
mjr 53:9b2611964afc 319 PINNAME_TO_WIRE(PTE4), // 8
mjr 53:9b2611964afc 320 PINNAME_TO_WIRE(PTE3), // 9
mjr 53:9b2611964afc 321 PINNAME_TO_WIRE(PTE2), // 10
mjr 53:9b2611964afc 322 PINNAME_TO_WIRE(PTB11), // 11
mjr 53:9b2611964afc 323 PINNAME_TO_WIRE(PTB10), // 12
mjr 53:9b2611964afc 324 PINNAME_TO_WIRE(PTB9), // 13
mjr 53:9b2611964afc 325 PINNAME_TO_WIRE(PTB8), // 14
mjr 53:9b2611964afc 326 PINNAME_TO_WIRE(PTC12), // 15
mjr 53:9b2611964afc 327 PINNAME_TO_WIRE(PTC13), // 16
mjr 53:9b2611964afc 328 PINNAME_TO_WIRE(PTC16), // 17
mjr 53:9b2611964afc 329 PINNAME_TO_WIRE(PTC17), // 18
mjr 53:9b2611964afc 330 PINNAME_TO_WIRE(PTA16), // 19
mjr 53:9b2611964afc 331 PINNAME_TO_WIRE(PTA17), // 20
mjr 53:9b2611964afc 332 PINNAME_TO_WIRE(PTE31), // 21
mjr 53:9b2611964afc 333 PINNAME_TO_WIRE(PTD6), // 22
mjr 53:9b2611964afc 334 PINNAME_TO_WIRE(PTD7), // 23
mjr 53:9b2611964afc 335 PINNAME_TO_WIRE(PTE1) // 24
mjr 40:cc0d9814522b 336 };
mjr 48:058ace2aed1d 337 button[i].set(bp[i],
mjr 48:058ace2aed1d 338 #if TEST_CONFIG_EXPAN
mjr 55:4db125cd11a0 339 // For expansion board testing only, assign the inputs
mjr 55:4db125cd11a0 340 // to keyboard keys A, B, etc. This isn't useful; it's
mjr 55:4db125cd11a0 341 // just for testing purposes. Note that the USB key code
mjr 55:4db125cd11a0 342 // for "A" is 4, "B" is 5, and so on sequentially through
mjr 55:4db125cd11a0 343 // the alphabet.
mjr 55:4db125cd11a0 344 BtnTypeKey, i+4);
mjr 55:4db125cd11a0 345 #elif STANDARD_CONFIG
mjr 55:4db125cd11a0 346 // For the standard configuration, assign the input to
mjr 55:4db125cd11a0 347 // joystick buttons 1-24, as in the original v1 default
mjr 55:4db125cd11a0 348 // configuration.
mjr 55:4db125cd11a0 349 BtnTypeJoystick, i+1);
mjr 48:058ace2aed1d 350 #endif
mjr 48:058ace2aed1d 351
mjr 38:091e511ce8a0 352 }
mjr 38:091e511ce8a0 353 #endif
mjr 38:091e511ce8a0 354
mjr 55:4db125cd11a0 355 #if TEST_CONFIG_EXPAN
mjr 55:4db125cd11a0 356 // For testing purposes, configure the basic complement of
mjr 55:4db125cd11a0 357 // expansion board ports. AS MENTIONED ABOVE, THIS IS PURELY FOR
mjr 55:4db125cd11a0 358 // TESTING. DON'T USE THIS METHOD TO CONFIGURE YOUR EXPANSION
mjr 55:4db125cd11a0 359 // BOARDS FOR ACTUAL DEPLOYMENT. It's much easier and cleaner
mjr 55:4db125cd11a0 360 // to use the unmodified standard build, and customize your
mjr 55:4db125cd11a0 361 // installation with the Pinscape Config Tool on Windows.
mjr 40:cc0d9814522b 362 //
mjr 55:4db125cd11a0 363 // For this testing setup, we'll configure one main board, one
mjr 55:4db125cd11a0 364 // power board, and one chime board. The *physical* ports on
mjr 55:4db125cd11a0 365 // the board are shown below. The logical (LedWiz/DOF) numbering
mjr 55:4db125cd11a0 366 // ISN'T sequential through the physical ports, because we want
mjr 55:4db125cd11a0 367 // to arrange the DOF ports so that the most important and most
mjr 55:4db125cd11a0 368 // common toys are assigned to ports 1-32. Those ports are
mjr 55:4db125cd11a0 369 // special because they're accessible to ALL software on the PC,
mjr 55:4db125cd11a0 370 // including older LedWiz-only software such as Future Pinball.
mjr 55:4db125cd11a0 371 // Ports above 32 are accessible only to modern DOF software,
mjr 55:4db125cd11a0 372 // like Visual Pinball and PinballX.
mjr 40:cc0d9814522b 373 //
mjr 40:cc0d9814522b 374 // Main board
mjr 40:cc0d9814522b 375 // TLC ports 0-15 -> flashers
mjr 40:cc0d9814522b 376 // TLC ports 16 -> strobe
mjr 40:cc0d9814522b 377 // TLC ports 17-31 -> flippers
mjr 40:cc0d9814522b 378 // Dig GPIO PTC8 -> knocker (timer-protected outputs)
mjr 40:cc0d9814522b 379 //
mjr 40:cc0d9814522b 380 // Power board:
mjr 40:cc0d9814522b 381 // TLC ports 32-63 -> general purpose outputs
mjr 40:cc0d9814522b 382 //
mjr 40:cc0d9814522b 383 // Chime board:
mjr 40:cc0d9814522b 384 // HC595 ports 0-7 -> timer-protected outputs
mjr 40:cc0d9814522b 385 //
mjr 38:091e511ce8a0 386 {
mjr 38:091e511ce8a0 387 int n = 0;
mjr 40:cc0d9814522b 388
mjr 40:cc0d9814522b 389 // 1-15 = flashers (TLC ports 0-15)
mjr 40:cc0d9814522b 390 // 16 = strobe (TLC port 15)
mjr 40:cc0d9814522b 391 for (int i = 0 ; i < 16 ; ++i)
mjr 40:cc0d9814522b 392 outPort[n++].set(PortTypeTLC5940, i, PortFlagGamma);
mjr 40:cc0d9814522b 393
mjr 53:9b2611964afc 394 // 17 = knocker (PTC8)
mjr 53:9b2611964afc 395 outPort[n++].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC8));
mjr 35:e959ffba78fd 396
mjr 40:cc0d9814522b 397 // 18-49 = power board outputs 1-32 (TLC ports 32-63)
mjr 40:cc0d9814522b 398 for (int i = 0 ; i < 32 ; ++i)
mjr 40:cc0d9814522b 399 outPort[n++].set(PortTypeTLC5940, i+32);
mjr 40:cc0d9814522b 400
mjr 40:cc0d9814522b 401 // 50-65 = flipper RGB (TLC ports 16-31)
mjr 40:cc0d9814522b 402 for (int i = 0 ; i < 16 ; ++i)
mjr 40:cc0d9814522b 403 outPort[n++].set(PortTypeTLC5940, i+16, PortFlagGamma);
mjr 59:94eb9265b6d7 404
mjr 40:cc0d9814522b 405 // 66-73 = chime board ports 1-8 (74HC595 ports 0-7)
mjr 40:cc0d9814522b 406 for (int i = 0 ; i < 8 ; ++i)
mjr 40:cc0d9814522b 407 outPort[n++].set(PortType74HC595, i);
mjr 59:94eb9265b6d7 408
mjr 40:cc0d9814522b 409 // set Disabled to signify end of configured outputs
mjr 38:091e511ce8a0 410 outPort[n].typ = PortTypeDisabled;
mjr 38:091e511ce8a0 411 }
mjr 38:091e511ce8a0 412 #endif
mjr 48:058ace2aed1d 413
mjr 55:4db125cd11a0 414 #if STANDARD_CONFIG
mjr 55:4db125cd11a0 415 //
mjr 55:4db125cd11a0 416 // For the standard build, set up the original complement
mjr 55:4db125cd11a0 417 // of 22 ports from the v1 default onfiguration.
mjr 55:4db125cd11a0 418 //
mjr 55:4db125cd11a0 419 // IMPORTANT! As mentioned above, don't edit this file to
mjr 55:4db125cd11a0 420 // customize this for your machine. Instead, use the unmodified
mjr 55:4db125cd11a0 421 // standard build, and customize your installation using the
mjr 55:4db125cd11a0 422 // Pinscape Config Tool on Windows.
mjr 55:4db125cd11a0 423 //
mjr 48:058ace2aed1d 424 #if TEST_KEEP_PRINTF
mjr 55:4db125cd11a0 425 outPort[ 0].set(PortTypeVirtual, PINNAME_TO_WIRE(NC)); // port 1 = NC to keep debug printf (PTA1 is SDA UART)
mjr 55:4db125cd11a0 426 outPort[ 1].set(PortTypeVirtual, PINNAME_TO_WIRE(NC)); // port 2 = NC to keep debug printf (PTA2 is SDA UART)
mjr 48:058ace2aed1d 427 #else
mjr 53:9b2611964afc 428 outPort[ 0].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTA1)); // port 1 = PTA1
mjr 53:9b2611964afc 429 outPort[ 1].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTA2)); // port 2 = PTA2
mjr 48:058ace2aed1d 430 #endif
mjr 53:9b2611964afc 431 outPort[ 2].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTD4)); // port 3 = PTD4
mjr 53:9b2611964afc 432 outPort[ 3].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTA12)); // port 4 = PTA12
mjr 53:9b2611964afc 433 outPort[ 4].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTA4)); // port 5 = PTA4
mjr 53:9b2611964afc 434 outPort[ 5].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTA5)); // port 6 = PTA5
mjr 53:9b2611964afc 435 outPort[ 6].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTA13)); // port 7 = PTA13
mjr 53:9b2611964afc 436 outPort[ 7].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTD5)); // port 8 = PTD5
mjr 53:9b2611964afc 437 outPort[ 8].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTD0)); // port 9 = PTD0
mjr 53:9b2611964afc 438 outPort[ 9].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTD3)); // port 10 = PTD3
mjr 53:9b2611964afc 439 outPort[10].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTD2)); // port 11 = PTD2
mjr 53:9b2611964afc 440 outPort[11].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC8)); // port 12 = PTC8
mjr 53:9b2611964afc 441 outPort[12].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC9)); // port 13 = PTC9
mjr 53:9b2611964afc 442 outPort[13].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC7)); // port 14 = PTC7
mjr 53:9b2611964afc 443 outPort[14].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC0)); // port 15 = PTC0
mjr 53:9b2611964afc 444 outPort[15].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC3)); // port 16 = PTC3
mjr 53:9b2611964afc 445 outPort[16].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC4)); // port 17 = PTC4
mjr 53:9b2611964afc 446 outPort[17].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC5)); // port 18 = PTC5
mjr 53:9b2611964afc 447 outPort[18].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC6)); // port 19 = PTC6
mjr 53:9b2611964afc 448 outPort[19].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC10)); // port 20 = PTC10
mjr 53:9b2611964afc 449 outPort[20].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC11)); // port 21 = PTC11
mjr 53:9b2611964afc 450 outPort[21].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTE0)); // port 22 = PTE0
mjr 48:058ace2aed1d 451 #endif
mjr 35:e959ffba78fd 452 }
mjr 35:e959ffba78fd 453
mjr 35:e959ffba78fd 454 // --- USB DEVICE CONFIGURATION ---
mjr 35:e959ffba78fd 455
mjr 35:e959ffba78fd 456 // USB device identification - vendor ID and product ID. For LedLWiz
mjr 35:e959ffba78fd 457 // emulation, use vendor ID 0xFAFA and product ID 0x00EF + unit#, where
mjr 35:e959ffba78fd 458 // unit# is the nominal LedWiz unit number from 1 to 16. Alternatively,
mjr 35:e959ffba78fd 459 // if LedWiz emulation isn't desired or causes any driver conflicts on
mjr 35:e959ffba78fd 460 // the host, we have a private Pinscape assignment as vendor ID 0x1209
mjr 35:e959ffba78fd 461 // and product ID 0xEAEA (registered with http://pid.codes, a registry
mjr 35:e959ffba78fd 462 // for open-source USB projects).
mjr 35:e959ffba78fd 463 uint16_t usbVendorID;
mjr 35:e959ffba78fd 464 uint16_t usbProductID;
mjr 35:e959ffba78fd 465
mjr 35:e959ffba78fd 466 // Pinscape Controller unit number. This is the nominal unit number,
mjr 35:e959ffba78fd 467 // from 1 to 16. We report this in the status query; DOF uses it to
mjr 53:9b2611964afc 468 // distinguish among Pinscape units. Note that this doesn't affect
mjr 35:e959ffba78fd 469 // the LedWiz unit numbering, which is implied by the USB Product ID.
mjr 35:e959ffba78fd 470 uint8_t psUnitNo;
mjr 35:e959ffba78fd 471
mjr 35:e959ffba78fd 472 // Are joystick reports enabled? Joystick reports can be turned off, to
mjr 35:e959ffba78fd 473 // use the device as purely an output controller.
mjr 35:e959ffba78fd 474 char joystickEnabled;
mjr 35:e959ffba78fd 475
mjr 51:57eb311faafa 476 // Timeout for rebooting the KL25Z when the connection is lost. On some
mjr 51:57eb311faafa 477 // hosts, the mbed USB stack has problems reconnecting after an initial
mjr 51:57eb311faafa 478 // connection is dropped. As a workaround, we can automatically reboot
mjr 51:57eb311faafa 479 // the KL25Z when it detects that it's no longer connected, after the
mjr 51:57eb311faafa 480 // interval set here expires. The timeout is in seconds; setting this
mjr 51:57eb311faafa 481 // to 0 disables the automatic reboot.
mjr 51:57eb311faafa 482 uint8_t disconnectRebootTimeout;
mjr 35:e959ffba78fd 483
mjr 35:e959ffba78fd 484 // --- ACCELEROMETER ---
mjr 35:e959ffba78fd 485
mjr 35:e959ffba78fd 486 // accelerometer orientation (ORIENTATION_xxx value)
mjr 35:e959ffba78fd 487 char orientation;
mjr 35:e959ffba78fd 488
mjr 35:e959ffba78fd 489
mjr 52:8298b2a73eb2 490 // --- EXPANSION BOARDS ---
mjr 52:8298b2a73eb2 491 struct
mjr 52:8298b2a73eb2 492 {
mjr 53:9b2611964afc 493 uint8_t typ; // expansion board set type:
mjr 53:9b2611964afc 494 // 1 -> Pinscape expansion boards
mjr 53:9b2611964afc 495 uint8_t vsn; // board set interface version
mjr 53:9b2611964afc 496 uint8_t ext[3]; // board set type-specific extended data
mjr 52:8298b2a73eb2 497
mjr 52:8298b2a73eb2 498 } expan;
mjr 52:8298b2a73eb2 499
mjr 52:8298b2a73eb2 500
mjr 35:e959ffba78fd 501 // --- PLUNGER CONFIGURATION ---
mjr 35:e959ffba78fd 502 struct
mjr 35:e959ffba78fd 503 {
mjr 35:e959ffba78fd 504 // plunger enabled/disabled
mjr 35:e959ffba78fd 505 char enabled;
mjr 33:d832bcab089e 506
mjr 35:e959ffba78fd 507 // plunger sensor type
mjr 35:e959ffba78fd 508 char sensorType;
mjr 35:e959ffba78fd 509
mjr 35:e959ffba78fd 510 // Plunger sensor pins. To accommodate a wide range of sensor types,
mjr 35:e959ffba78fd 511 // we keep a generic list of 4 pin assignments. The use of each pin
mjr 35:e959ffba78fd 512 // varies by sensor. The lists below are in order of the generic
mjr 35:e959ffba78fd 513 // pins; NC means that the pin isn't used by the sensor. Each pin's
mjr 35:e959ffba78fd 514 // GPIO usage is also listed. Certain usages limit which physical
mjr 35:e959ffba78fd 515 // pins can be assigned (e.g., AnalogIn or PwmOut).
mjr 35:e959ffba78fd 516 //
mjr 35:e959ffba78fd 517 // TSL1410R/1412R, serial: SI (DigitalOut), CLK (DigitalOut), AO (AnalogIn), NC
mjr 35:e959ffba78fd 518 // TSL1410R/1412R, parallel: SI (DigitalOut), CLK (DigitalOut), AO1 (AnalogIn), AO2 (AnalogIn)
mjr 35:e959ffba78fd 519 // Potentiometer: AO (AnalogIn), NC, NC, NC
mjr 35:e959ffba78fd 520 // AEDR8300: A (InterruptIn), B (InterruptIn), NC, NC
mjr 35:e959ffba78fd 521 // AS5304: A (InterruptIn), B (InterruptIn), NC, NC
mjr 53:9b2611964afc 522 //
mjr 53:9b2611964afc 523 // Note! These are stored in uint8_t WIRE format, not PinName format.
mjr 53:9b2611964afc 524 uint8_t sensorPin[4];
mjr 35:e959ffba78fd 525
mjr 53:9b2611964afc 526 // ZB LAUNCH BALL button setup.
mjr 35:e959ffba78fd 527 //
mjr 35:e959ffba78fd 528 // This configures the "ZB Launch Ball" feature in DOF, based on Zeb's (of
mjr 35:e959ffba78fd 529 // zebsboards.com) scheme for using a mechanical plunger as a Launch button.
mjr 35:e959ffba78fd 530 // Set the port to 0 to disable the feature.
mjr 35:e959ffba78fd 531 //
mjr 35:e959ffba78fd 532 // The port number is an LedWiz port number that we monitor for activation.
mjr 53:9b2611964afc 533 // This port isn't meant to be connected to a physical device, although it
mjr 53:9b2611964afc 534 // can be if desired. It's primarily to let the host tell the controller
mjr 53:9b2611964afc 535 // when the ZB Launch feature is active. The port numbering starts at 1;
mjr 53:9b2611964afc 536 // set this to zero to disable the feature.
mjr 35:e959ffba78fd 537 //
mjr 53:9b2611964afc 538 // The key type and code has the same meaning as for a button mapping. This
mjr 53:9b2611964afc 539 // sets the key input sent to the PC when the plunger triggers a launch when
mjr 53:9b2611964afc 540 // the mode is active. For example, set keytype=2 and keycode=0x28 to send
mjr 53:9b2611964afc 541 // the Enter key (which is the key almost all PC pinball software uses for
mjr 53:9b2611964afc 542 // plunger and Launch button input).
mjr 35:e959ffba78fd 543 //
mjr 40:cc0d9814522b 544 // The "push distance" is the distance, in 1/1000 inch units, for registering a
mjr 40:cc0d9814522b 545 // push on the plunger as a button push. If the player pushes the plunger
mjr 40:cc0d9814522b 546 // forward of the rest position by this amount, we'll treat it as pushing the
mjr 40:cc0d9814522b 547 // button, even if the player didn't pull back the plunger first. This lets
mjr 40:cc0d9814522b 548 // the player treat the plunger knob as a button for games where it's meaningful
mjr 35:e959ffba78fd 549 // to hold down the Launch button for specific intervals (e.g., "Championship
mjr 35:e959ffba78fd 550 // Pub").
mjr 35:e959ffba78fd 551 struct
mjr 35:e959ffba78fd 552 {
mjr 53:9b2611964afc 553 uint8_t port;
mjr 53:9b2611964afc 554 uint8_t keytype;
mjr 53:9b2611964afc 555 uint8_t keycode;
mjr 53:9b2611964afc 556 uint16_t pushDistance;
mjr 35:e959ffba78fd 557
mjr 35:e959ffba78fd 558 } zbLaunchBall;
mjr 35:e959ffba78fd 559
mjr 35:e959ffba78fd 560 // --- PLUNGER CALIBRATION ---
mjr 35:e959ffba78fd 561 struct
mjr 35:e959ffba78fd 562 {
mjr 35:e959ffba78fd 563 // has the plunger been calibrated?
mjr 53:9b2611964afc 564 bool calibrated;
mjr 55:4db125cd11a0 565
mjr 55:4db125cd11a0 566 // Feature enable mask:
mjr 55:4db125cd11a0 567 //
mjr 55:4db125cd11a0 568 // 0x01 = calibration button enabled
mjr 55:4db125cd11a0 569 // 0x02 = indicator light enabled
mjr 55:4db125cd11a0 570 uint8_t features;
mjr 35:e959ffba78fd 571
mjr 35:e959ffba78fd 572 // calibration button switch pin
mjr 53:9b2611964afc 573 uint8_t btn;
mjr 35:e959ffba78fd 574
mjr 35:e959ffba78fd 575 // calibration button indicator light pin
mjr 53:9b2611964afc 576 uint8_t led;
mjr 35:e959ffba78fd 577
mjr 48:058ace2aed1d 578 // Plunger calibration min, zero, and max. These are in terms of the
mjr 48:058ace2aed1d 579 // unsigned 16-bit scale (0x0000..0xffff) that we use for the raw sensor
mjr 48:058ace2aed1d 580 // readings.
mjr 48:058ace2aed1d 581 //
mjr 48:058ace2aed1d 582 // The zero point is the rest position (aka park position), where the
mjr 48:058ace2aed1d 583 // plunger is in equilibrium between the main spring and the barrel
mjr 48:058ace2aed1d 584 // spring. In the standard setup, the plunger can travel a small
mjr 48:058ace2aed1d 585 // distance forward of the rest position, because the barrel spring
mjr 48:058ace2aed1d 586 // can be compressed a bit. The minimum is the maximum forward point
mjr 48:058ace2aed1d 587 // where the barrel spring can't be compressed any further.
mjr 48:058ace2aed1d 588 uint16_t min;
mjr 48:058ace2aed1d 589 uint16_t zero;
mjr 48:058ace2aed1d 590 uint16_t max;
mjr 52:8298b2a73eb2 591
mjr 52:8298b2a73eb2 592 // Measured release time, in milliseconds.
mjr 52:8298b2a73eb2 593 uint8_t tRelease;
mjr 35:e959ffba78fd 594
mjr 44:b5ac89b9cd5d 595 // Reset the plunger calibration
mjr 44:b5ac89b9cd5d 596 void setDefaults()
mjr 35:e959ffba78fd 597 {
mjr 44:b5ac89b9cd5d 598 calibrated = false; // not calibrated
mjr 48:058ace2aed1d 599 min = 0; // assume we can go all the way forward...
mjr 48:058ace2aed1d 600 max = 0xffff; // ...and all the way back
mjr 48:058ace2aed1d 601 zero = max/6; // the rest position is usually around 1/2" back = 1/6 of total travel
mjr 52:8298b2a73eb2 602 tRelease = 65; // standard 65ms release time
mjr 44:b5ac89b9cd5d 603 }
mjr 44:b5ac89b9cd5d 604
mjr 44:b5ac89b9cd5d 605 // Begin calibration. This sets each limit to the worst
mjr 44:b5ac89b9cd5d 606 // case point - for example, we set the retracted position
mjr 44:b5ac89b9cd5d 607 // to all the way forward. Each actual reading that comes
mjr 44:b5ac89b9cd5d 608 // in is then checked against the current limit, and if it's
mjr 44:b5ac89b9cd5d 609 // outside of the limit, we reset the limit to the new reading.
mjr 44:b5ac89b9cd5d 610 void begin()
mjr 44:b5ac89b9cd5d 611 {
mjr 48:058ace2aed1d 612 min = 0; // we don't calibrate the maximum forward position, so keep this at zero
mjr 48:058ace2aed1d 613 zero = 0xffff; // set the zero position all the way back
mjr 48:058ace2aed1d 614 max = 0; // set the retracted position all the way forward
mjr 52:8298b2a73eb2 615 tRelease = 65; // revert to a default release time
mjr 35:e959ffba78fd 616 }
mjr 17:ab3cec0c8bf4 617
mjr 35:e959ffba78fd 618 } cal;
mjr 18:5e890ebd0023 619
mjr 35:e959ffba78fd 620 } plunger;
mjr 29:582472d0bc57 621
mjr 35:e959ffba78fd 622
mjr 35:e959ffba78fd 623 // --- TV ON SWITCH ---
mjr 35:e959ffba78fd 624 //
mjr 35:e959ffba78fd 625 // To use the TV ON switch feature, the special power sensing circuitry
mjr 35:e959ffba78fd 626 // implemented on the Expansion Board must be attached (or an equivalent
mjr 35:e959ffba78fd 627 // circuit, as described in the Build Guide). The circuitry lets us
mjr 35:e959ffba78fd 628 // detect power state changes on the secondary power supply.
mjr 35:e959ffba78fd 629 struct
mjr 35:e959ffba78fd 630 {
mjr 35:e959ffba78fd 631 // PSU2 power status sense (DigitalIn pin). This pin goes LOW when the
mjr 35:e959ffba78fd 632 // secondary power supply is turned off, and remains LOW until the LATCH
mjr 35:e959ffba78fd 633 // pin is raised high AND the secondary PSU is turned on. Once HIGH,
mjr 35:e959ffba78fd 634 // it remains HIGH as long as the secondary PSU is on.
mjr 53:9b2611964afc 635 uint8_t statusPin;
mjr 35:e959ffba78fd 636
mjr 35:e959ffba78fd 637 // PSU2 power status latch (DigitalOut pin)
mjr 53:9b2611964afc 638 uint8_t latchPin;
mjr 35:e959ffba78fd 639
mjr 35:e959ffba78fd 640 // TV ON relay pin (DigitalOut pin). This pin controls the TV switch
mjr 35:e959ffba78fd 641 // relay. Raising the pin HIGH turns the relay ON (energizes the coil).
mjr 53:9b2611964afc 642 uint8_t relayPin;
mjr 35:e959ffba78fd 643
mjr 40:cc0d9814522b 644 // TV ON delay time, in 1/100 second units. This is the interval between
mjr 40:cc0d9814522b 645 // sensing that the secondary power supply has turned on and pulsing the
mjr 40:cc0d9814522b 646 // TV ON switch relay.
mjr 40:cc0d9814522b 647 int delayTime;
mjr 35:e959ffba78fd 648
mjr 35:e959ffba78fd 649 } TVON;
mjr 35:e959ffba78fd 650
mjr 53:9b2611964afc 651 // --- Night Mode ---
mjr 53:9b2611964afc 652 struct
mjr 53:9b2611964afc 653 {
mjr 55:4db125cd11a0 654 uint8_t btn; // night mode button number (1..MAX_BUTTONS, 0 = no button)
mjr 53:9b2611964afc 655 uint8_t flags; // flags:
mjr 53:9b2611964afc 656 // 0x01 = on/off switch (if not set, it's a momentary button)
mjr 55:4db125cd11a0 657 uint8_t port; // indicator output port number (1..MAX_OUT_PORTS, 0 = no indicator)
mjr 53:9b2611964afc 658 } nightMode;
mjr 53:9b2611964afc 659
mjr 29:582472d0bc57 660
mjr 35:e959ffba78fd 661 // --- TLC5940NT PWM Controller Chip Setup ---
mjr 35:e959ffba78fd 662 struct
mjr 35:e959ffba78fd 663 {
mjr 35:e959ffba78fd 664 // number of TLC5940NT chips connected in daisy chain
mjr 35:e959ffba78fd 665 int nchips;
mjr 35:e959ffba78fd 666
mjr 53:9b2611964afc 667 // pin connections (wire pin IDs)
mjr 53:9b2611964afc 668 uint8_t sin; // Serial data - must connect to SPIO MOSI -> PTC6 or PTD2
mjr 53:9b2611964afc 669 uint8_t sclk; // Serial clock - must connect to SPIO SCLK -> PTC5 or PTD1
mjr 35:e959ffba78fd 670 // (but don't use PTD1, since it's hard-wired to the on-board blue LED)
mjr 53:9b2611964afc 671 uint8_t xlat; // XLAT (latch) signal - connect to any GPIO pin
mjr 53:9b2611964afc 672 uint8_t blank; // BLANK signal - connect to any GPIO pin
mjr 53:9b2611964afc 673 uint8_t gsclk; // Grayscale clock - must connect to a PWM-out capable pin
mjr 29:582472d0bc57 674
mjr 35:e959ffba78fd 675 } tlc5940;
mjr 35:e959ffba78fd 676
mjr 35:e959ffba78fd 677
mjr 35:e959ffba78fd 678 // --- 74HC595 Shift Register Setup ---
mjr 35:e959ffba78fd 679 struct
mjr 35:e959ffba78fd 680 {
mjr 35:e959ffba78fd 681 // number of 74HC595 chips attached in daisy chain
mjr 35:e959ffba78fd 682 int nchips;
mjr 35:e959ffba78fd 683
mjr 35:e959ffba78fd 684 // pin connections
mjr 53:9b2611964afc 685 uint8_t sin; // Serial data - use any GPIO pin
mjr 53:9b2611964afc 686 uint8_t sclk; // Serial clock - use any GPIO pin
mjr 53:9b2611964afc 687 uint8_t latch; // Latch - use any GPIO pin
mjr 53:9b2611964afc 688 uint8_t ena; // Enable signal - use any GPIO pin
mjr 35:e959ffba78fd 689
mjr 35:e959ffba78fd 690 } hc595;
mjr 34:6b981a2afab7 691
mjr 25:e22b88bd783a 692
mjr 35:e959ffba78fd 693 // --- Button Input Setup ---
mjr 65:739875521aae 694 ButtonCfg button[MAX_BUTTONS + VIRTUAL_BUTTONS] __attribute__((packed));
mjr 66:2e3583fbd2f4 695
mjr 66:2e3583fbd2f4 696 // Shift button index. If this is zero, there's no shift button. If this
mjr 66:2e3583fbd2f4 697 // is nonzero, it's the 1-based index of the shift button in the button[]
mjr 66:2e3583fbd2f4 698 // list.
mjr 66:2e3583fbd2f4 699 //
mjr 66:2e3583fbd2f4 700 // The shift button can also be used as a regular input key. If it is,
mjr 66:2e3583fbd2f4 701 // we DON'T send the input key to the PC as usual when the button is
mjr 66:2e3583fbd2f4 702 // pressed. Instead, we wait to see if the shift function is used:
mjr 66:2e3583fbd2f4 703 //
mjr 66:2e3583fbd2f4 704 // - If another button is pressed while the shift button is held down,
mjr 66:2e3583fbd2f4 705 // and the other button is programmed with a valid key for the shifted/
mjr 66:2e3583fbd2f4 706 // secondary meaning (i.e., typ2 is not BtnTypeNone), the shift function
mjr 66:2e3583fbd2f4 707 // is considered to have been used. We send the secondary meaning of
mjr 66:2e3583fbd2f4 708 // the other button to the PC. The shift key itself generates no PC
mjr 66:2e3583fbd2f4 709 // input in this case, since it has now performed its shift function.
mjr 66:2e3583fbd2f4 710 // Other shifted keys can also be pressed as long as the shift button
mjr 66:2e3583fbd2f4 711 // is held down, and they'll be sent to the PC with their shifted values
mjr 66:2e3583fbd2f4 712 // as well.
mjr 66:2e3583fbd2f4 713 //
mjr 66:2e3583fbd2f4 714 // - If the shift button is released before any other button with a
mjr 66:2e3583fbd2f4 715 // shifted key value is pressed, then the shift button press is taken to
mjr 66:2e3583fbd2f4 716 // be an ordinary key press instead of the shift function. In this case,
mjr 66:2e3583fbd2f4 717 // we report the shift button's key code to the PC when the button is
mjr 66:2e3583fbd2f4 718 // released. We can't report the key code to the PC until then because
mjr 66:2e3583fbd2f4 719 // we don't know until then that another key won't be pressed first.
mjr 66:2e3583fbd2f4 720 // The key press on release is a single timed pulse that's long enough
mjr 66:2e3583fbd2f4 721 // to register as a single key press on the PC, but not long enough to
mjr 66:2e3583fbd2f4 722 // trigger auto-repeat on the PC.
mjr 66:2e3583fbd2f4 723 uint8_t shiftButton;
mjr 17:ab3cec0c8bf4 724
mjr 35:e959ffba78fd 725 // --- LedWiz Output Port Setup ---
mjr 38:091e511ce8a0 726 LedWizPortCfg outPort[MAX_OUT_PORTS] __attribute__((packed)); // LedWiz & extended output ports
mjr 48:058ace2aed1d 727
mjr 17:ab3cec0c8bf4 728 };
mjr 17:ab3cec0c8bf4 729
mjr 35:e959ffba78fd 730 #endif