Arnaud VALLEY / Mbed 2 deprecated Pinscape_Controller_V2_arnoz

Mirror with some correction

Dependencies:   mbed FastIO FastPWM USBDevice

config.h@77:0b96f6867312, 2017-03-17 (annotated)

Committer:
mjr
Date:
Fri Mar 17 22:02:08 2017 +0000
Revision:
77:0b96f6867312
Parent:
69:cc5039284fac
Child:
78:1e00b3fa11af
New memory pool management; keeping old ones as #ifdefs for now for reference.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mjr 17:ab3cec0c8bf4 1 // Pinscape Controller Configuration
mjr 17:ab3cec0c8bf4 2 //
mjr 55:4db125cd11a0 3 // New for 2016: dynamic configuration! To configure the controller,
mjr 55:4db125cd11a0 4 // connect the KL25Z to your PC, install the STANDARD pre-compiled .bin
mjr 55:4db125cd11a0 5 // file, and run the Windows config tool. There's no need (as there was in
mjr 55:4db125cd11a0 6 // the past) to edit the source code or to compile a custom version of the
mjr 55:4db125cd11a0 7 // binary just to customize setup options.
mjr 35:e959ffba78fd 8 //
mjr 55:4db125cd11a0 9 // In earlier versions, configuration was handled mostly with #ifdef and
mjr 55:4db125cd11a0 10 // similar constructs. To customize the setup, you had to create a private
mjr 55:4db125cd11a0 11 // forked copy of the source code, edit the constants defined in config.h,
mjr 55:4db125cd11a0 12 // and compile a custom binary. That's no longer necessary!
mjr 35:e959ffba78fd 13 //
mjr 35:e959ffba78fd 14 // The new approach is to do everything (or as much as possible, anyway)
mjr 35:e959ffba78fd 15 // via the Windows config tool. You shouldn't have to recompile a custom
mjr 35:e959ffba78fd 16 // version just to make a configurable change. Of course, you're still free
mjr 55:4db125cd11a0 17 // to create a custom version if you want to add entirely new features or
mjr 55:4db125cd11a0 18 // make changes that go beyond what the setup tool exposes.
mjr 35:e959ffba78fd 19 //
mjr 35:e959ffba78fd 20
mjr 55:4db125cd11a0 21 // Pre-packaged configuration selection.
mjr 55:4db125cd11a0 22 //
mjr 55:4db125cd11a0 23 // IMPORTANT! If you just want to create a custom configuration, DON'T
mjr 55:4db125cd11a0 24 // modify this file, DON'T use these macros, and DON'T compiler on mbed.
mjr 55:4db125cd11a0 25 // Instead, use the unmodified standard build and configure your system
mjr 55:4db125cd11a0 26 // using the Pinscape Config Tool on Windows. That's easier and better
mjr 55:4db125cd11a0 27 // because the config tool will be able to back up your settings to a
mjr 55:4db125cd11a0 28 // local file on your PC, and will automatically preserve your settings
mjr 55:4db125cd11a0 29 // across upgrades. You won't have to worry about merging your changes
mjr 55:4db125cd11a0 30 // into every update of the repository source code, since you'll never
mjr 55:4db125cd11a0 31 // have to change the source code.
mjr 55:4db125cd11a0 32 //
mjr 55:4db125cd11a0 33 // The different configurations here are purely for testing purposes.
mjr 55:4db125cd11a0 34 // The standard build uses the STANDARD_CONFIG settings, which are the
mjr 55:4db125cd11a0 35 // same as the original version where you had to modify config.h by hand
mjr 55:4db125cd11a0 36 // to customize your system.
mjr 55:4db125cd11a0 37 //
mjr 55:4db125cd11a0 38 #define STANDARD_CONFIG 1 // standard settings, based on v1 base settings
mjr 55:4db125cd11a0 39 #define TEST_CONFIG_EXPAN 0 // configuration for the expansion boards
mjr 77:0b96f6867312 40 #define TEST_KEEP_PRINTF 1 // for debugging purposes, keep printf() enabled
mjr 55:4db125cd11a0 41 // by leaving the SDA UART GPIO pins unallocated
mjr 48:058ace2aed1d 42
mjr 17:ab3cec0c8bf4 43
mjr 25:e22b88bd783a 44 #ifndef CONFIG_H
mjr 25:e22b88bd783a 45 #define CONFIG_H
mjr 17:ab3cec0c8bf4 46
mjr 35:e959ffba78fd 47 // Plunger type codes
mjr 35:e959ffba78fd 48 // NOTE! These values are part of the external USB interface. New
mjr 35:e959ffba78fd 49 // values can be added, but the meaning of an existing assigned number
mjr 35:e959ffba78fd 50 // should remain fixed to keep the PC-side config tool compatible across
mjr 35:e959ffba78fd 51 // versions.
mjr 35:e959ffba78fd 52 const int PlungerType_None = 0; // no plunger
mjr 35:e959ffba78fd 53 const int PlungerType_TSL1410RS = 1; // TSL1410R linear image sensor (1280x1 pixels, 400dpi), serial mode
mjr 35:e959ffba78fd 54 const int PlungerType_TSL1410RP = 2; // TSL1410R, parallel mode (reads the two sensor sections concurrently)
mjr 69:cc5039284fac 55 const int PlungerType_TSL1412SS = 3; // TSL1412S linear image sensor (1536x1 pixels, 400dpi), serial mode
mjr 69:cc5039284fac 56 const int PlungerType_TSL1412SP = 4; // TSL1412S, parallel mode
mjr 35:e959ffba78fd 57 const int PlungerType_Pot = 5; // potentionmeter
mjr 35:e959ffba78fd 58 const int PlungerType_OptQuad = 6; // AEDR8300 optical quadrature sensor
mjr 35:e959ffba78fd 59 const int PlungerType_MagQuad = 7; // AS5304 magnetic quadrature sensor
mjr 21:5048e16cc9ef 60
mjr 35:e959ffba78fd 61 // Accelerometer orientation codes
mjr 35:e959ffba78fd 62 // These values are part of the external USB interface
mjr 35:e959ffba78fd 63 const int OrientationFront = 0; // USB ports pointed toward front of cabinet
mjr 35:e959ffba78fd 64 const int OrientationLeft = 1; // ports pointed toward left side of cabinet
mjr 35:e959ffba78fd 65 const int OrientationRight = 2; // ports pointed toward right side of cabinet
mjr 35:e959ffba78fd 66 const int OrientationRear = 3; // ports pointed toward back of cabinet
mjr 25:e22b88bd783a 67
mjr 77:0b96f6867312 68 // Accelerometer dynamic range codes
mjr 77:0b96f6867312 69 const int AccelRange1G = 0; // +/-1G
mjr 77:0b96f6867312 70 const int AccelRange2G = 1; // +/-2G
mjr 77:0b96f6867312 71 const int AccelRange4G = 2; // +/-4G
mjr 77:0b96f6867312 72 const int AccelRange8G = 3; // +/-8G
mjr 77:0b96f6867312 73
mjr 35:e959ffba78fd 74 // input button types
mjr 53:9b2611964afc 75 const int BtnTypeNone = 0; // unused
mjr 35:e959ffba78fd 76 const int BtnTypeJoystick = 1; // joystick button
mjr 53:9b2611964afc 77 const int BtnTypeKey = 2; // keyboard key
mjr 67:c39e66c4e000 78 const int BtnTypeMedia = 3; // media control key
mjr 38:091e511ce8a0 79
mjr 38:091e511ce8a0 80 // input button flags
mjr 38:091e511ce8a0 81 const uint8_t BtnFlagPulse = 0x01; // pulse mode - reports each change in the physical switch state
mjr 38:091e511ce8a0 82 // as a brief press of the logical button/keyboard key
mjr 40:cc0d9814522b 83
mjr 40:cc0d9814522b 84 // button setup structure
mjr 40:cc0d9814522b 85 struct ButtonCfg
mjr 40:cc0d9814522b 86 {
mjr 66:2e3583fbd2f4 87 // physical GPIO pin - a Wire-to-PinName mapping index
mjr 66:2e3583fbd2f4 88 uint8_t pin;
mjr 66:2e3583fbd2f4 89
mjr 66:2e3583fbd2f4 90 // Key type and value reported to the PC
mjr 40:cc0d9814522b 91 uint8_t typ; // key type reported to PC - a BtnTypeXxx value
mjr 53:9b2611964afc 92 uint8_t val; // key value reported - meaning depends on 'typ' value:
mjr 53:9b2611964afc 93 // none -> no PC input reports (val is unused)
mjr 53:9b2611964afc 94 // joystick -> val is joystick button number (1..32)
mjr 53:9b2611964afc 95 // keyboard -> val is USB scan code
mjr 77:0b96f6867312 96 uint8_t IRCommand; // IR command to send when the button is pressed, as
mjr 77:0b96f6867312 97 // an IR command slot number: 1..MAX_IR_CODES, or 0
mjr 77:0b96f6867312 98 // if no IR command is to be sent
mjr 66:2e3583fbd2f4 99
mjr 66:2e3583fbd2f4 100 // Shifted key type and value. These used when the button is pressed
mjr 66:2e3583fbd2f4 101 // while the Local Shift Button is being held down. We send the key
mjr 66:2e3583fbd2f4 102 // code given here instead of the regular typ/val code in this case.
mjr 66:2e3583fbd2f4 103 // If typ2 is BtnTypeNone, we use the regular typ/val code whether or
mjr 66:2e3583fbd2f4 104 // not the shift button is being held.
mjr 66:2e3583fbd2f4 105 uint8_t typ2; // shifted key type
mjr 66:2e3583fbd2f4 106 uint8_t val2; // shifted key value
mjr 77:0b96f6867312 107 uint8_t IRCommand2; // IR command to send when shifted button is pressed
mjr 66:2e3583fbd2f4 108
mjr 66:2e3583fbd2f4 109 // key flags - a bitwise combination of BtnFlagXxx values
mjr 66:2e3583fbd2f4 110 uint8_t flags;
mjr 40:cc0d9814522b 111
mjr 40:cc0d9814522b 112 void set(uint8_t pin, uint8_t typ, uint8_t val, uint8_t flags = 0)
mjr 40:cc0d9814522b 113 {
mjr 40:cc0d9814522b 114 this->pin = pin;
mjr 40:cc0d9814522b 115 this->typ = typ;
mjr 40:cc0d9814522b 116 this->val = val;
mjr 77:0b96f6867312 117 this->IRCommand = 0;
mjr 40:cc0d9814522b 118 this->flags = flags;
mjr 77:0b96f6867312 119 this->typ2 = 0;
mjr 77:0b96f6867312 120 this->val2 = 0;
mjr 77:0b96f6867312 121 this->IRCommand2 = 0;
mjr 40:cc0d9814522b 122 }
mjr 40:cc0d9814522b 123
mjr 40:cc0d9814522b 124 } __attribute__((packed));
mjr 40:cc0d9814522b 125
mjr 33:d832bcab089e 126
mjr 65:739875521aae 127 // maximum number of input button mappings in configuration
mjr 65:739875521aae 128 const int MAX_BUTTONS = 48;
mjr 65:739875521aae 129
mjr 65:739875521aae 130 // extra slots for virtual buttons (ZB Launch Ball)
mjr 65:739875521aae 131 const int VIRTUAL_BUTTONS = 1; // total number of buttons
mjr 65:739875521aae 132 const int ZBL_BUTTON_CFG = MAX_BUTTONS; // index of ZB Launch Ball slot
mjr 33:d832bcab089e 133
mjr 35:e959ffba78fd 134 // LedWiz output port type codes
mjr 35:e959ffba78fd 135 // These values are part of the external USB interface
mjr 35:e959ffba78fd 136 const int PortTypeDisabled = 0; // port is disabled - not visible to LedWiz/DOF host
mjr 35:e959ffba78fd 137 const int PortTypeGPIOPWM = 1; // GPIO port, PWM enabled
mjr 35:e959ffba78fd 138 const int PortTypeGPIODig = 2; // GPIO port, digital out
mjr 35:e959ffba78fd 139 const int PortTypeTLC5940 = 3; // TLC5940 port
mjr 35:e959ffba78fd 140 const int PortType74HC595 = 4; // 74HC595 port
mjr 53:9b2611964afc 141 const int PortTypeVirtual = 5; // Virtual port - visible to host software, but not connected
mjr 53:9b2611964afc 142 // to a physical output
mjr 17:ab3cec0c8bf4 143
mjr 35:e959ffba78fd 144 // LedWiz output port flag bits
mjr 38:091e511ce8a0 145 const uint8_t PortFlagActiveLow = 0x01; // physical output is active-low
mjr 38:091e511ce8a0 146 const uint8_t PortFlagNoisemaker = 0x02; // noisemaker device - disable when night mode is engaged
mjr 40:cc0d9814522b 147 const uint8_t PortFlagGamma = 0x04; // apply gamma correction to this output
mjr 35:e959ffba78fd 148
mjr 35:e959ffba78fd 149 // maximum number of output ports
mjr 48:058ace2aed1d 150 const int MAX_OUT_PORTS = 128;
mjr 33:d832bcab089e 151
mjr 38:091e511ce8a0 152 // port configuration data
mjr 38:091e511ce8a0 153 struct LedWizPortCfg
mjr 38:091e511ce8a0 154 {
mjr 38:091e511ce8a0 155 uint8_t typ; // port type: a PortTypeXxx value
mjr 38:091e511ce8a0 156 uint8_t pin; // physical output pin: for a GPIO port, this is an index in the
mjr 38:091e511ce8a0 157 // USB-to-PinName mapping list; for a TLC5940 or 74HC595 port, it's
mjr 38:091e511ce8a0 158 // the output number, starting from 0 for OUT0 on the first chip in
mjr 38:091e511ce8a0 159 // the daisy chain. For inactive and virtual ports, it's unused.
mjr 38:091e511ce8a0 160 uint8_t flags; // flags: a combination of PortFlagXxx values
mjr 40:cc0d9814522b 161
mjr 40:cc0d9814522b 162 void set(uint8_t typ, uint8_t pin, uint8_t flags = 0)
mjr 40:cc0d9814522b 163 {
mjr 40:cc0d9814522b 164 this->typ = typ;
mjr 40:cc0d9814522b 165 this->pin = pin;
mjr 40:cc0d9814522b 166 this->flags = flags;
mjr 40:cc0d9814522b 167 }
mjr 40:cc0d9814522b 168
mjr 77:0b96f6867312 169 } __attribute__ ((packed));
mjr 77:0b96f6867312 170
mjr 77:0b96f6867312 171 // IR command configuration flags
mjr 77:0b96f6867312 172 const uint8_t IRFlagTVON = 0x01; // send command at TV ON time
mjr 77:0b96f6867312 173 const uint8_t IRFlagDittos = 0x02; // use "ditto" codes on send
mjr 77:0b96f6867312 174
mjr 77:0b96f6867312 175 // IR command configuration data
mjr 77:0b96f6867312 176 struct IRCommandCfg
mjr 77:0b96f6867312 177 {
mjr 77:0b96f6867312 178 uint8_t flags; // flags: a combination of IRFlagXxx values
mjr 77:0b96f6867312 179 uint8_t keytype; // key type to send when IR command is received
mjr 77:0b96f6867312 180 uint8_t keycode; // key code to send when IR command is received
mjr 77:0b96f6867312 181 uint8_t protocol; // IR protocol ID (see IRRemote/IRProtocolID.h)
mjr 77:0b96f6867312 182 struct
mjr 77:0b96f6867312 183 {
mjr 77:0b96f6867312 184 uint32_t lo; // low 32 bits of code
mjr 77:0b96f6867312 185 uint32_t hi; // high 32 bits of code
mjr 77:0b96f6867312 186 } code; // 64-bit command code (protocol-specific; see IRProtocols.h)
mjr 77:0b96f6867312 187 } __attribute__ ((packed));
mjr 77:0b96f6867312 188
mjr 77:0b96f6867312 189 // Maximum number of IR commands
mjr 77:0b96f6867312 190 const int MAX_IR_CODES = 16;
mjr 38:091e511ce8a0 191
mjr 38:091e511ce8a0 192
mjr 53:9b2611964afc 193 // Convert a physical pin name to a wire pin name
mjr 53:9b2611964afc 194 #define PINNAME_TO_WIRE(p) \
mjr 53:9b2611964afc 195 uint8_t((p) == NC ? 0xFF : \
mjr 53:9b2611964afc 196 (((p) & 0xF000 ) >> (PORT_SHIFT - 5)) | (((p) & 0xFF) >> 2))
mjr 53:9b2611964afc 197
mjr 35:e959ffba78fd 198 struct Config
mjr 35:e959ffba78fd 199 {
mjr 35:e959ffba78fd 200 // set all values to factory defaults
mjr 35:e959ffba78fd 201 void setFactoryDefaults()
mjr 35:e959ffba78fd 202 {
mjr 35:e959ffba78fd 203 // By default, pretend to be LedWiz unit #8. This can be from 1 to 16. Real
mjr 35:e959ffba78fd 204 // LedWiz units have their unit number set at the factory, and the vast majority
mjr 35:e959ffba78fd 205 // are set up as unit #1, since that's the default for anyone who doesn't ask
mjr 35:e959ffba78fd 206 // for a different setting. It seems rare for anyone to use more than one unit
mjr 35:e959ffba78fd 207 // in a pin cab, but for the few who do, the others will probably be numbered
mjr 35:e959ffba78fd 208 // sequentially as #2, #3, etc. It seems safe to assume that no one out there
mjr 48:058ace2aed1d 209 // has a unit #8, so we'll use that as our default. This can be changed from
mjr 48:058ace2aed1d 210 // the config tool, but for the sake of convenience, it's better to pick a
mjr 48:058ace2aed1d 211 // default that most people won't have to change.
mjr 54:fd77a6b2f76c 212 usbVendorID = 0xFAFA; // LedWiz vendor code
mjr 48:058ace2aed1d 213 usbProductID = 0x00F7; // LedWiz product code for unit #8
mjr 61:3c7e6e9ec355 214
mjr 55:4db125cd11a0 215 // Set the default Pinscape unit number to #1. This is a separate identifier
mjr 55:4db125cd11a0 216 // from the LedWiz ID, so you don't have to worry about making this different
mjr 55:4db125cd11a0 217 // from your LedWiz units. Each Pinscape unit should have a unique value for
mjr 55:4db125cd11a0 218 // this ID, though.
mjr 55:4db125cd11a0 219 //
mjr 55:4db125cd11a0 220 // Note that Pinscape unit #1 corresponds to DOF Pinscape #51, PS 2 -> DOF 52,
mjr 55:4db125cd11a0 221 // and so on - just add 50 to get the DOF ID.
mjr 55:4db125cd11a0 222 psUnitNo = 1;
mjr 35:e959ffba78fd 223
mjr 51:57eb311faafa 224 // set a disconnect reboot timeout of 10 seconds by default
mjr 55:4db125cd11a0 225 disconnectRebootTimeout = 10;
mjr 51:57eb311faafa 226
mjr 35:e959ffba78fd 227 // enable joystick reports
mjr 35:e959ffba78fd 228 joystickEnabled = true;
mjr 35:e959ffba78fd 229
mjr 35:e959ffba78fd 230 // assume standard orientation, with USB ports toward front of cabinet
mjr 35:e959ffba78fd 231 orientation = OrientationFront;
mjr 25:e22b88bd783a 232
mjr 52:8298b2a73eb2 233 // assume a basic setup with no expansion boards
mjr 53:9b2611964afc 234 expan.typ = 0;
mjr 53:9b2611964afc 235 expan.vsn = 0;
mjr 53:9b2611964afc 236 memset(expan.ext, 0, sizeof(expan.ext));
mjr 52:8298b2a73eb2 237
mjr 35:e959ffba78fd 238 // assume no plunger is attached
mjr 77:0b96f6867312 239 plunger.enabled = 0x00;
mjr 35:e959ffba78fd 240 plunger.sensorType = PlungerType_None;
mjr 35:e959ffba78fd 241
mjr 55:4db125cd11a0 242 #if TEST_CONFIG_EXPAN || STANDARD_CONFIG
mjr 77:0b96f6867312 243 plunger.enabled = 0x01;
mjr 43:7a6364d82a41 244 plunger.sensorType = PlungerType_TSL1410RS;
mjr 53:9b2611964afc 245 plunger.sensorPin[0] = PINNAME_TO_WIRE(PTE20); // SI
mjr 53:9b2611964afc 246 plunger.sensorPin[1] = PINNAME_TO_WIRE(PTE21); // SCLK
mjr 53:9b2611964afc 247 plunger.sensorPin[2] = PINNAME_TO_WIRE(PTB0); // AO1 = PTB0 = ADC0_SE8
mjr 53:9b2611964afc 248 plunger.sensorPin[3] = PINNAME_TO_WIRE(PTE22); // AO2 (parallel mode) = PTE22 = ADC0_SE3
mjr 43:7a6364d82a41 249 #endif
mjr 43:7a6364d82a41 250
mjr 48:058ace2aed1d 251 // default plunger calibration button settings
mjr 55:4db125cd11a0 252 plunger.cal.features = 0x03; // 0x01 = enable button, 0x02 = enable indicator lamp
mjr 55:4db125cd11a0 253 plunger.cal.btn = PINNAME_TO_WIRE(PTE29); // button input (DigitalIn port)
mjr 55:4db125cd11a0 254 plunger.cal.led = PINNAME_TO_WIRE(PTE23); // button output (DigitalOut port)
mjr 35:e959ffba78fd 255
mjr 44:b5ac89b9cd5d 256 // set the default plunger calibration
mjr 44:b5ac89b9cd5d 257 plunger.cal.setDefaults();
mjr 35:e959ffba78fd 258
mjr 35:e959ffba78fd 259 // disable the ZB Launch Ball by default
mjr 53:9b2611964afc 260 plunger.zbLaunchBall.port = 0; // 0 = disabled
mjr 65:739875521aae 261 plunger.zbLaunchBall.keytype = BtnTypeKey; // keyboard key
mjr 61:3c7e6e9ec355 262 plunger.zbLaunchBall.keycode = 0x28; // USB keyboard scan code for Enter key
mjr 61:3c7e6e9ec355 263 plunger.zbLaunchBall.pushDistance = 63; // 63/1000 in == .063" == about 1/16"
mjr 35:e959ffba78fd 264
mjr 35:e959ffba78fd 265 // assume no TV ON switch
mjr 53:9b2611964afc 266 TVON.statusPin = PINNAME_TO_WIRE(NC);
mjr 53:9b2611964afc 267 TVON.latchPin = PINNAME_TO_WIRE(NC);
mjr 53:9b2611964afc 268 TVON.relayPin = PINNAME_TO_WIRE(NC);
mjr 53:9b2611964afc 269 TVON.delayTime = 700; // 7 seconds
mjr 55:4db125cd11a0 270
mjr 55:4db125cd11a0 271 #if TEST_CONFIG_EXPAN
mjr 55:4db125cd11a0 272 // expansion board TV ON wiring
mjr 53:9b2611964afc 273 TVON.statusPin = PINNAME_TO_WIRE(PTD2);
mjr 53:9b2611964afc 274 TVON.latchPin = PINNAME_TO_WIRE(PTE0);
mjr 53:9b2611964afc 275 TVON.relayPin = PINNAME_TO_WIRE(PTD3);
mjr 53:9b2611964afc 276 TVON.delayTime = 700; // 7 seconds
mjr 38:091e511ce8a0 277 #endif
mjr 53:9b2611964afc 278
mjr 53:9b2611964afc 279 // assume no night mode switch or indicator lamp
mjr 53:9b2611964afc 280 nightMode.btn = 0;
mjr 53:9b2611964afc 281 nightMode.flags = 0;
mjr 53:9b2611964afc 282 nightMode.port = 0;
mjr 35:e959ffba78fd 283
mjr 35:e959ffba78fd 284 // assume no TLC5940 chips
mjr 35:e959ffba78fd 285 tlc5940.nchips = 0;
mjr 55:4db125cd11a0 286
mjr 55:4db125cd11a0 287 #if TEST_CONFIG_EXPAN
mjr 55:4db125cd11a0 288 // for expansion board testing purposes, assume the common setup
mjr 55:4db125cd11a0 289 // with one main board and one power board
mjr 48:058ace2aed1d 290 tlc5940.nchips = 4;
mjr 38:091e511ce8a0 291 #endif
mjr 38:091e511ce8a0 292
mjr 55:4db125cd11a0 293 // Default TLC5940 pin assignments. Note that it's harmless to set
mjr 55:4db125cd11a0 294 // these to valid pins even if no TLC5940 chips are actually present,
mjr 55:4db125cd11a0 295 // since the main program won't allocate the connections if 'nchips'
mjr 55:4db125cd11a0 296 // is zero. This means that the pins are free to be used for other
mjr 55:4db125cd11a0 297 // purposes (such as output ports) if not using TLC5940 chips.
mjr 53:9b2611964afc 298 tlc5940.sin = PINNAME_TO_WIRE(PTC6);
mjr 53:9b2611964afc 299 tlc5940.sclk = PINNAME_TO_WIRE(PTC5);
mjr 53:9b2611964afc 300 tlc5940.xlat = PINNAME_TO_WIRE(PTC10);
mjr 59:94eb9265b6d7 301 tlc5940.blank = PINNAME_TO_WIRE(PTC7);
mjr 59:94eb9265b6d7 302 #if TEST_KEEP_PRINTF
mjr 59:94eb9265b6d7 303 tlc5940.gsclk = PINNAME_TO_WIRE(PTA13); // PTA1 is reserved for SDA printf()
mjr 59:94eb9265b6d7 304 #else
mjr 53:9b2611964afc 305 tlc5940.gsclk = PINNAME_TO_WIRE(PTA1);
mjr 59:94eb9265b6d7 306 #endif
mjr 35:e959ffba78fd 307
mjr 35:e959ffba78fd 308 // assume no 74HC595 chips
mjr 35:e959ffba78fd 309 hc595.nchips = 0;
mjr 55:4db125cd11a0 310
mjr 55:4db125cd11a0 311 #if TEST_CONFIG_EXPAN
mjr 55:4db125cd11a0 312 // for expansion board testing purposes, assume one chime board
mjr 48:058ace2aed1d 313 hc595.nchips = 1;
mjr 40:cc0d9814522b 314 #endif
mjr 40:cc0d9814522b 315
mjr 55:4db125cd11a0 316 // Default 74HC595 pin assignments. As with the TLC5940 pins, it's
mjr 55:4db125cd11a0 317 // harmless to assign pins here even if no 74HC595 chips are used,
mjr 55:4db125cd11a0 318 // since the main program won't actually allocate the pins if 'nchips'
mjr 55:4db125cd11a0 319 // is zero.
mjr 53:9b2611964afc 320 hc595.sin = PINNAME_TO_WIRE(PTA5);
mjr 53:9b2611964afc 321 hc595.sclk = PINNAME_TO_WIRE(PTA4);
mjr 53:9b2611964afc 322 hc595.latch = PINNAME_TO_WIRE(PTA12);
mjr 53:9b2611964afc 323 hc595.ena = PINNAME_TO_WIRE(PTD4);
mjr 38:091e511ce8a0 324
mjr 77:0b96f6867312 325
mjr 77:0b96f6867312 326 // Default IR hardware pin assignments. On the expansion boards,
mjr 77:0b96f6867312 327 // the sensor is connected to PTA13, and the emitter LED is on PTC9.
mjr 77:0b96f6867312 328 #if TEST_CONFIG_EXPAN
mjr 77:0b96f6867312 329 IR.sensor = PINNAME_TO_WIRE(PTA13);
mjr 77:0b96f6867312 330 IR.emitter = PINNAME_TO_WIRE(PTC9);
mjr 77:0b96f6867312 331 #else
mjr 77:0b96f6867312 332 IR.sensor = PINNAME_TO_WIRE(NC);
mjr 77:0b96f6867312 333 IR.emitter = PINNAME_TO_WIRE(NC);
mjr 77:0b96f6867312 334 #endif
mjr 77:0b96f6867312 335
mjr 77:0b96f6867312 336 // clear out all IR slots
mjr 77:0b96f6867312 337 memset(IRCommand, 0, sizeof(IRCommand));
mjr 77:0b96f6867312 338 for (int i = 0 ; i < MAX_IR_CODES ; ++i)
mjr 77:0b96f6867312 339 {
mjr 77:0b96f6867312 340 IRCommand[i].protocol = 0;
mjr 77:0b96f6867312 341 IRCommand[i].keytype = BtnTypeNone;
mjr 77:0b96f6867312 342 }
mjr 77:0b96f6867312 343
mjr 35:e959ffba78fd 344 // initially configure with no LedWiz output ports
mjr 35:e959ffba78fd 345 outPort[0].typ = PortTypeDisabled;
mjr 66:2e3583fbd2f4 346
mjr 66:2e3583fbd2f4 347 // initially configure with no shift key
mjr 66:2e3583fbd2f4 348 shiftButton = 0;
mjr 53:9b2611964afc 349
mjr 35:e959ffba78fd 350 // initially configure with no input buttons
mjr 35:e959ffba78fd 351 for (int i = 0 ; i < MAX_BUTTONS ; ++i)
mjr 53:9b2611964afc 352 button[i].set(PINNAME_TO_WIRE(NC), BtnTypeNone, 0);
mjr 38:091e511ce8a0 353
mjr 55:4db125cd11a0 354 #if STANDARD_CONFIG | TEST_CONFIG_EXPAN
mjr 55:4db125cd11a0 355 // For the standard configuration, assign 24 input ports to
mjr 55:4db125cd11a0 356 // joystick buttons 1-24. Assign the same GPIO pins used
mjr 55:4db125cd11a0 357 // in the original v1 default configuration. For expansion
mjr 55:4db125cd11a0 358 // board testing purposes, also assign the input ports, with
mjr 55:4db125cd11a0 359 // the noted differences.
mjr 38:091e511ce8a0 360 for (int i = 0 ; i < 24 ; ++i) {
mjr 55:4db125cd11a0 361 static const int bp[] = {
mjr 53:9b2611964afc 362 PINNAME_TO_WIRE(PTC2), // 1
mjr 53:9b2611964afc 363 PINNAME_TO_WIRE(PTB3), // 2
mjr 53:9b2611964afc 364 PINNAME_TO_WIRE(PTB2), // 3
mjr 53:9b2611964afc 365 PINNAME_TO_WIRE(PTB1), // 4
mjr 53:9b2611964afc 366 PINNAME_TO_WIRE(PTE30), // 5
mjr 48:058ace2aed1d 367 #if TEST_CONFIG_EXPAN
mjr 55:4db125cd11a0 368 PINNAME_TO_WIRE(PTC11), // 6 - expansion boards use PTC11 for this, since PTE22
mjr 55:4db125cd11a0 369 // is reserved for a plunger connection
mjr 55:4db125cd11a0 370 #elif STANDARD_CONFIG
mjr 55:4db125cd11a0 371 PINNAME_TO_WIRE(PTE22), // 6 - original standalone setup uses PTE22
mjr 48:058ace2aed1d 372 #endif
mjr 53:9b2611964afc 373 PINNAME_TO_WIRE(PTE5), // 7
mjr 53:9b2611964afc 374 PINNAME_TO_WIRE(PTE4), // 8
mjr 53:9b2611964afc 375 PINNAME_TO_WIRE(PTE3), // 9
mjr 53:9b2611964afc 376 PINNAME_TO_WIRE(PTE2), // 10
mjr 53:9b2611964afc 377 PINNAME_TO_WIRE(PTB11), // 11
mjr 53:9b2611964afc 378 PINNAME_TO_WIRE(PTB10), // 12
mjr 53:9b2611964afc 379 PINNAME_TO_WIRE(PTB9), // 13
mjr 53:9b2611964afc 380 PINNAME_TO_WIRE(PTB8), // 14
mjr 53:9b2611964afc 381 PINNAME_TO_WIRE(PTC12), // 15
mjr 53:9b2611964afc 382 PINNAME_TO_WIRE(PTC13), // 16
mjr 53:9b2611964afc 383 PINNAME_TO_WIRE(PTC16), // 17
mjr 53:9b2611964afc 384 PINNAME_TO_WIRE(PTC17), // 18
mjr 53:9b2611964afc 385 PINNAME_TO_WIRE(PTA16), // 19
mjr 53:9b2611964afc 386 PINNAME_TO_WIRE(PTA17), // 20
mjr 53:9b2611964afc 387 PINNAME_TO_WIRE(PTE31), // 21
mjr 53:9b2611964afc 388 PINNAME_TO_WIRE(PTD6), // 22
mjr 53:9b2611964afc 389 PINNAME_TO_WIRE(PTD7), // 23
mjr 53:9b2611964afc 390 PINNAME_TO_WIRE(PTE1) // 24
mjr 40:cc0d9814522b 391 };
mjr 48:058ace2aed1d 392 button[i].set(bp[i],
mjr 48:058ace2aed1d 393 #if TEST_CONFIG_EXPAN
mjr 55:4db125cd11a0 394 // For expansion board testing only, assign the inputs
mjr 55:4db125cd11a0 395 // to keyboard keys A, B, etc. This isn't useful; it's
mjr 55:4db125cd11a0 396 // just for testing purposes. Note that the USB key code
mjr 55:4db125cd11a0 397 // for "A" is 4, "B" is 5, and so on sequentially through
mjr 55:4db125cd11a0 398 // the alphabet.
mjr 55:4db125cd11a0 399 BtnTypeKey, i+4);
mjr 55:4db125cd11a0 400 #elif STANDARD_CONFIG
mjr 55:4db125cd11a0 401 // For the standard configuration, assign the input to
mjr 55:4db125cd11a0 402 // joystick buttons 1-24, as in the original v1 default
mjr 55:4db125cd11a0 403 // configuration.
mjr 55:4db125cd11a0 404 BtnTypeJoystick, i+1);
mjr 48:058ace2aed1d 405 #endif
mjr 48:058ace2aed1d 406
mjr 38:091e511ce8a0 407 }
mjr 38:091e511ce8a0 408 #endif
mjr 38:091e511ce8a0 409
mjr 55:4db125cd11a0 410 #if TEST_CONFIG_EXPAN
mjr 55:4db125cd11a0 411 // For testing purposes, configure the basic complement of
mjr 55:4db125cd11a0 412 // expansion board ports. AS MENTIONED ABOVE, THIS IS PURELY FOR
mjr 55:4db125cd11a0 413 // TESTING. DON'T USE THIS METHOD TO CONFIGURE YOUR EXPANSION
mjr 55:4db125cd11a0 414 // BOARDS FOR ACTUAL DEPLOYMENT. It's much easier and cleaner
mjr 55:4db125cd11a0 415 // to use the unmodified standard build, and customize your
mjr 55:4db125cd11a0 416 // installation with the Pinscape Config Tool on Windows.
mjr 40:cc0d9814522b 417 //
mjr 55:4db125cd11a0 418 // For this testing setup, we'll configure one main board, one
mjr 55:4db125cd11a0 419 // power board, and one chime board. The *physical* ports on
mjr 55:4db125cd11a0 420 // the board are shown below. The logical (LedWiz/DOF) numbering
mjr 55:4db125cd11a0 421 // ISN'T sequential through the physical ports, because we want
mjr 55:4db125cd11a0 422 // to arrange the DOF ports so that the most important and most
mjr 55:4db125cd11a0 423 // common toys are assigned to ports 1-32. Those ports are
mjr 55:4db125cd11a0 424 // special because they're accessible to ALL software on the PC,
mjr 55:4db125cd11a0 425 // including older LedWiz-only software such as Future Pinball.
mjr 55:4db125cd11a0 426 // Ports above 32 are accessible only to modern DOF software,
mjr 55:4db125cd11a0 427 // like Visual Pinball and PinballX.
mjr 40:cc0d9814522b 428 //
mjr 40:cc0d9814522b 429 // Main board
mjr 40:cc0d9814522b 430 // TLC ports 0-15 -> flashers
mjr 40:cc0d9814522b 431 // TLC ports 16 -> strobe
mjr 40:cc0d9814522b 432 // TLC ports 17-31 -> flippers
mjr 40:cc0d9814522b 433 // Dig GPIO PTC8 -> knocker (timer-protected outputs)
mjr 40:cc0d9814522b 434 //
mjr 40:cc0d9814522b 435 // Power board:
mjr 40:cc0d9814522b 436 // TLC ports 32-63 -> general purpose outputs
mjr 40:cc0d9814522b 437 //
mjr 40:cc0d9814522b 438 // Chime board:
mjr 40:cc0d9814522b 439 // HC595 ports 0-7 -> timer-protected outputs
mjr 40:cc0d9814522b 440 //
mjr 38:091e511ce8a0 441 {
mjr 38:091e511ce8a0 442 int n = 0;
mjr 40:cc0d9814522b 443
mjr 40:cc0d9814522b 444 // 1-15 = flashers (TLC ports 0-15)
mjr 40:cc0d9814522b 445 // 16 = strobe (TLC port 15)
mjr 40:cc0d9814522b 446 for (int i = 0 ; i < 16 ; ++i)
mjr 40:cc0d9814522b 447 outPort[n++].set(PortTypeTLC5940, i, PortFlagGamma);
mjr 40:cc0d9814522b 448
mjr 53:9b2611964afc 449 // 17 = knocker (PTC8)
mjr 53:9b2611964afc 450 outPort[n++].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC8));
mjr 35:e959ffba78fd 451
mjr 40:cc0d9814522b 452 // 18-49 = power board outputs 1-32 (TLC ports 32-63)
mjr 40:cc0d9814522b 453 for (int i = 0 ; i < 32 ; ++i)
mjr 40:cc0d9814522b 454 outPort[n++].set(PortTypeTLC5940, i+32);
mjr 40:cc0d9814522b 455
mjr 40:cc0d9814522b 456 // 50-65 = flipper RGB (TLC ports 16-31)
mjr 40:cc0d9814522b 457 for (int i = 0 ; i < 16 ; ++i)
mjr 40:cc0d9814522b 458 outPort[n++].set(PortTypeTLC5940, i+16, PortFlagGamma);
mjr 59:94eb9265b6d7 459
mjr 40:cc0d9814522b 460 // 66-73 = chime board ports 1-8 (74HC595 ports 0-7)
mjr 40:cc0d9814522b 461 for (int i = 0 ; i < 8 ; ++i)
mjr 40:cc0d9814522b 462 outPort[n++].set(PortType74HC595, i);
mjr 59:94eb9265b6d7 463
mjr 40:cc0d9814522b 464 // set Disabled to signify end of configured outputs
mjr 38:091e511ce8a0 465 outPort[n].typ = PortTypeDisabled;
mjr 38:091e511ce8a0 466 }
mjr 38:091e511ce8a0 467 #endif
mjr 48:058ace2aed1d 468
mjr 55:4db125cd11a0 469 #if STANDARD_CONFIG
mjr 55:4db125cd11a0 470 //
mjr 55:4db125cd11a0 471 // For the standard build, set up the original complement
mjr 55:4db125cd11a0 472 // of 22 ports from the v1 default onfiguration.
mjr 55:4db125cd11a0 473 //
mjr 55:4db125cd11a0 474 // IMPORTANT! As mentioned above, don't edit this file to
mjr 55:4db125cd11a0 475 // customize this for your machine. Instead, use the unmodified
mjr 55:4db125cd11a0 476 // standard build, and customize your installation using the
mjr 55:4db125cd11a0 477 // Pinscape Config Tool on Windows.
mjr 55:4db125cd11a0 478 //
mjr 48:058ace2aed1d 479 #if TEST_KEEP_PRINTF
mjr 55:4db125cd11a0 480 outPort[ 0].set(PortTypeVirtual, PINNAME_TO_WIRE(NC)); // port 1 = NC to keep debug printf (PTA1 is SDA UART)
mjr 55:4db125cd11a0 481 outPort[ 1].set(PortTypeVirtual, PINNAME_TO_WIRE(NC)); // port 2 = NC to keep debug printf (PTA2 is SDA UART)
mjr 48:058ace2aed1d 482 #else
mjr 53:9b2611964afc 483 outPort[ 0].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTA1)); // port 1 = PTA1
mjr 53:9b2611964afc 484 outPort[ 1].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTA2)); // port 2 = PTA2
mjr 48:058ace2aed1d 485 #endif
mjr 53:9b2611964afc 486 outPort[ 2].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTD4)); // port 3 = PTD4
mjr 53:9b2611964afc 487 outPort[ 3].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTA12)); // port 4 = PTA12
mjr 53:9b2611964afc 488 outPort[ 4].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTA4)); // port 5 = PTA4
mjr 53:9b2611964afc 489 outPort[ 5].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTA5)); // port 6 = PTA5
mjr 53:9b2611964afc 490 outPort[ 6].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTA13)); // port 7 = PTA13
mjr 53:9b2611964afc 491 outPort[ 7].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTD5)); // port 8 = PTD5
mjr 53:9b2611964afc 492 outPort[ 8].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTD0)); // port 9 = PTD0
mjr 53:9b2611964afc 493 outPort[ 9].set(PortTypeGPIOPWM, PINNAME_TO_WIRE(PTD3)); // port 10 = PTD3
mjr 53:9b2611964afc 494 outPort[10].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTD2)); // port 11 = PTD2
mjr 53:9b2611964afc 495 outPort[11].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC8)); // port 12 = PTC8
mjr 53:9b2611964afc 496 outPort[12].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC9)); // port 13 = PTC9
mjr 53:9b2611964afc 497 outPort[13].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC7)); // port 14 = PTC7
mjr 53:9b2611964afc 498 outPort[14].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC0)); // port 15 = PTC0
mjr 53:9b2611964afc 499 outPort[15].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC3)); // port 16 = PTC3
mjr 53:9b2611964afc 500 outPort[16].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC4)); // port 17 = PTC4
mjr 53:9b2611964afc 501 outPort[17].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC5)); // port 18 = PTC5
mjr 53:9b2611964afc 502 outPort[18].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC6)); // port 19 = PTC6
mjr 53:9b2611964afc 503 outPort[19].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC10)); // port 20 = PTC10
mjr 53:9b2611964afc 504 outPort[20].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTC11)); // port 21 = PTC11
mjr 53:9b2611964afc 505 outPort[21].set(PortTypeGPIODig, PINNAME_TO_WIRE(PTE0)); // port 22 = PTE0
mjr 48:058ace2aed1d 506 #endif
mjr 35:e959ffba78fd 507 }
mjr 35:e959ffba78fd 508
mjr 35:e959ffba78fd 509 // --- USB DEVICE CONFIGURATION ---
mjr 35:e959ffba78fd 510
mjr 35:e959ffba78fd 511 // USB device identification - vendor ID and product ID. For LedLWiz
mjr 35:e959ffba78fd 512 // emulation, use vendor ID 0xFAFA and product ID 0x00EF + unit#, where
mjr 35:e959ffba78fd 513 // unit# is the nominal LedWiz unit number from 1 to 16. Alternatively,
mjr 35:e959ffba78fd 514 // if LedWiz emulation isn't desired or causes any driver conflicts on
mjr 35:e959ffba78fd 515 // the host, we have a private Pinscape assignment as vendor ID 0x1209
mjr 35:e959ffba78fd 516 // and product ID 0xEAEA (registered with http://pid.codes, a registry
mjr 35:e959ffba78fd 517 // for open-source USB projects).
mjr 35:e959ffba78fd 518 uint16_t usbVendorID;
mjr 35:e959ffba78fd 519 uint16_t usbProductID;
mjr 35:e959ffba78fd 520
mjr 35:e959ffba78fd 521 // Pinscape Controller unit number. This is the nominal unit number,
mjr 35:e959ffba78fd 522 // from 1 to 16. We report this in the status query; DOF uses it to
mjr 53:9b2611964afc 523 // distinguish among Pinscape units. Note that this doesn't affect
mjr 35:e959ffba78fd 524 // the LedWiz unit numbering, which is implied by the USB Product ID.
mjr 35:e959ffba78fd 525 uint8_t psUnitNo;
mjr 35:e959ffba78fd 526
mjr 35:e959ffba78fd 527 // Are joystick reports enabled? Joystick reports can be turned off, to
mjr 35:e959ffba78fd 528 // use the device as purely an output controller.
mjr 77:0b96f6867312 529 uint8_t joystickEnabled;
mjr 35:e959ffba78fd 530
mjr 51:57eb311faafa 531 // Timeout for rebooting the KL25Z when the connection is lost. On some
mjr 51:57eb311faafa 532 // hosts, the mbed USB stack has problems reconnecting after an initial
mjr 51:57eb311faafa 533 // connection is dropped. As a workaround, we can automatically reboot
mjr 51:57eb311faafa 534 // the KL25Z when it detects that it's no longer connected, after the
mjr 51:57eb311faafa 535 // interval set here expires. The timeout is in seconds; setting this
mjr 51:57eb311faafa 536 // to 0 disables the automatic reboot.
mjr 51:57eb311faafa 537 uint8_t disconnectRebootTimeout;
mjr 35:e959ffba78fd 538
mjr 35:e959ffba78fd 539 // --- ACCELEROMETER ---
mjr 35:e959ffba78fd 540
mjr 77:0b96f6867312 541 // accelerometer orientation (OrientationXxx value)
mjr 77:0b96f6867312 542 uint8_t orientation;
mjr 77:0b96f6867312 543
mjr 77:0b96f6867312 544 // dynamic range (AccelRangeXxx value)
mjr 77:0b96f6867312 545 uint8_t accelRange;
mjr 35:e959ffba78fd 546
mjr 35:e959ffba78fd 547
mjr 52:8298b2a73eb2 548 // --- EXPANSION BOARDS ---
mjr 52:8298b2a73eb2 549 struct
mjr 52:8298b2a73eb2 550 {
mjr 53:9b2611964afc 551 uint8_t typ; // expansion board set type:
mjr 53:9b2611964afc 552 // 1 -> Pinscape expansion boards
mjr 53:9b2611964afc 553 uint8_t vsn; // board set interface version
mjr 53:9b2611964afc 554 uint8_t ext[3]; // board set type-specific extended data
mjr 52:8298b2a73eb2 555
mjr 52:8298b2a73eb2 556 } expan;
mjr 52:8298b2a73eb2 557
mjr 52:8298b2a73eb2 558
mjr 35:e959ffba78fd 559 // --- PLUNGER CONFIGURATION ---
mjr 35:e959ffba78fd 560 struct
mjr 35:e959ffba78fd 561 {
mjr 77:0b96f6867312 562 // Plunger enabled/disabled. Note that we use the status flag
mjr 77:0b96f6867312 563 // bit 0x01 if enabled, 0x00 if disabled. This conveniently
mjr 77:0b96f6867312 564 // can be tested as though it's a bool, but should always be
mjr 77:0b96f6867312 565 // stored as 0x01 or 0x00 so that it can be OR'ed into the
mjr 77:0b96f6867312 566 // status report flag bits.
mjr 77:0b96f6867312 567 uint8_t enabled;
mjr 33:d832bcab089e 568
mjr 35:e959ffba78fd 569 // plunger sensor type
mjr 77:0b96f6867312 570 uint8_t sensorType;
mjr 35:e959ffba78fd 571
mjr 35:e959ffba78fd 572 // Plunger sensor pins. To accommodate a wide range of sensor types,
mjr 35:e959ffba78fd 573 // we keep a generic list of 4 pin assignments. The use of each pin
mjr 35:e959ffba78fd 574 // varies by sensor. The lists below are in order of the generic
mjr 35:e959ffba78fd 575 // pins; NC means that the pin isn't used by the sensor. Each pin's
mjr 35:e959ffba78fd 576 // GPIO usage is also listed. Certain usages limit which physical
mjr 35:e959ffba78fd 577 // pins can be assigned (e.g., AnalogIn or PwmOut).
mjr 35:e959ffba78fd 578 //
mjr 35:e959ffba78fd 579 // TSL1410R/1412R, serial: SI (DigitalOut), CLK (DigitalOut), AO (AnalogIn), NC
mjr 35:e959ffba78fd 580 // TSL1410R/1412R, parallel: SI (DigitalOut), CLK (DigitalOut), AO1 (AnalogIn), AO2 (AnalogIn)
mjr 35:e959ffba78fd 581 // Potentiometer: AO (AnalogIn), NC, NC, NC
mjr 35:e959ffba78fd 582 // AEDR8300: A (InterruptIn), B (InterruptIn), NC, NC
mjr 35:e959ffba78fd 583 // AS5304: A (InterruptIn), B (InterruptIn), NC, NC
mjr 53:9b2611964afc 584 //
mjr 53:9b2611964afc 585 // Note! These are stored in uint8_t WIRE format, not PinName format.
mjr 53:9b2611964afc 586 uint8_t sensorPin[4];
mjr 35:e959ffba78fd 587
mjr 53:9b2611964afc 588 // ZB LAUNCH BALL button setup.
mjr 35:e959ffba78fd 589 //
mjr 35:e959ffba78fd 590 // This configures the "ZB Launch Ball" feature in DOF, based on Zeb's (of
mjr 35:e959ffba78fd 591 // zebsboards.com) scheme for using a mechanical plunger as a Launch button.
mjr 35:e959ffba78fd 592 // Set the port to 0 to disable the feature.
mjr 35:e959ffba78fd 593 //
mjr 35:e959ffba78fd 594 // The port number is an LedWiz port number that we monitor for activation.
mjr 53:9b2611964afc 595 // This port isn't meant to be connected to a physical device, although it
mjr 53:9b2611964afc 596 // can be if desired. It's primarily to let the host tell the controller
mjr 53:9b2611964afc 597 // when the ZB Launch feature is active. The port numbering starts at 1;
mjr 53:9b2611964afc 598 // set this to zero to disable the feature.
mjr 35:e959ffba78fd 599 //
mjr 53:9b2611964afc 600 // The key type and code has the same meaning as for a button mapping. This
mjr 53:9b2611964afc 601 // sets the key input sent to the PC when the plunger triggers a launch when
mjr 53:9b2611964afc 602 // the mode is active. For example, set keytype=2 and keycode=0x28 to send
mjr 53:9b2611964afc 603 // the Enter key (which is the key almost all PC pinball software uses for
mjr 53:9b2611964afc 604 // plunger and Launch button input).
mjr 35:e959ffba78fd 605 //
mjr 40:cc0d9814522b 606 // The "push distance" is the distance, in 1/1000 inch units, for registering a
mjr 40:cc0d9814522b 607 // push on the plunger as a button push. If the player pushes the plunger
mjr 40:cc0d9814522b 608 // forward of the rest position by this amount, we'll treat it as pushing the
mjr 40:cc0d9814522b 609 // button, even if the player didn't pull back the plunger first. This lets
mjr 40:cc0d9814522b 610 // the player treat the plunger knob as a button for games where it's meaningful
mjr 35:e959ffba78fd 611 // to hold down the Launch button for specific intervals (e.g., "Championship
mjr 35:e959ffba78fd 612 // Pub").
mjr 35:e959ffba78fd 613 struct
mjr 35:e959ffba78fd 614 {
mjr 53:9b2611964afc 615 uint8_t port;
mjr 53:9b2611964afc 616 uint8_t keytype;
mjr 53:9b2611964afc 617 uint8_t keycode;
mjr 53:9b2611964afc 618 uint16_t pushDistance;
mjr 35:e959ffba78fd 619
mjr 35:e959ffba78fd 620 } zbLaunchBall;
mjr 35:e959ffba78fd 621
mjr 35:e959ffba78fd 622 // --- PLUNGER CALIBRATION ---
mjr 35:e959ffba78fd 623 struct
mjr 35:e959ffba78fd 624 {
mjr 35:e959ffba78fd 625 // has the plunger been calibrated?
mjr 53:9b2611964afc 626 bool calibrated;
mjr 55:4db125cd11a0 627
mjr 55:4db125cd11a0 628 // Feature enable mask:
mjr 55:4db125cd11a0 629 //
mjr 55:4db125cd11a0 630 // 0x01 = calibration button enabled
mjr 55:4db125cd11a0 631 // 0x02 = indicator light enabled
mjr 55:4db125cd11a0 632 uint8_t features;
mjr 35:e959ffba78fd 633
mjr 35:e959ffba78fd 634 // calibration button switch pin
mjr 53:9b2611964afc 635 uint8_t btn;
mjr 35:e959ffba78fd 636
mjr 35:e959ffba78fd 637 // calibration button indicator light pin
mjr 53:9b2611964afc 638 uint8_t led;
mjr 35:e959ffba78fd 639
mjr 48:058ace2aed1d 640 // Plunger calibration min, zero, and max. These are in terms of the
mjr 48:058ace2aed1d 641 // unsigned 16-bit scale (0x0000..0xffff) that we use for the raw sensor
mjr 48:058ace2aed1d 642 // readings.
mjr 48:058ace2aed1d 643 //
mjr 48:058ace2aed1d 644 // The zero point is the rest position (aka park position), where the
mjr 48:058ace2aed1d 645 // plunger is in equilibrium between the main spring and the barrel
mjr 48:058ace2aed1d 646 // spring. In the standard setup, the plunger can travel a small
mjr 48:058ace2aed1d 647 // distance forward of the rest position, because the barrel spring
mjr 48:058ace2aed1d 648 // can be compressed a bit. The minimum is the maximum forward point
mjr 48:058ace2aed1d 649 // where the barrel spring can't be compressed any further.
mjr 48:058ace2aed1d 650 uint16_t min;
mjr 48:058ace2aed1d 651 uint16_t zero;
mjr 48:058ace2aed1d 652 uint16_t max;
mjr 52:8298b2a73eb2 653
mjr 52:8298b2a73eb2 654 // Measured release time, in milliseconds.
mjr 52:8298b2a73eb2 655 uint8_t tRelease;
mjr 35:e959ffba78fd 656
mjr 44:b5ac89b9cd5d 657 // Reset the plunger calibration
mjr 44:b5ac89b9cd5d 658 void setDefaults()
mjr 35:e959ffba78fd 659 {
mjr 44:b5ac89b9cd5d 660 calibrated = false; // not calibrated
mjr 48:058ace2aed1d 661 min = 0; // assume we can go all the way forward...
mjr 48:058ace2aed1d 662 max = 0xffff; // ...and all the way back
mjr 48:058ace2aed1d 663 zero = max/6; // the rest position is usually around 1/2" back = 1/6 of total travel
mjr 52:8298b2a73eb2 664 tRelease = 65; // standard 65ms release time
mjr 44:b5ac89b9cd5d 665 }
mjr 44:b5ac89b9cd5d 666
mjr 44:b5ac89b9cd5d 667 // Begin calibration. This sets each limit to the worst
mjr 44:b5ac89b9cd5d 668 // case point - for example, we set the retracted position
mjr 44:b5ac89b9cd5d 669 // to all the way forward. Each actual reading that comes
mjr 44:b5ac89b9cd5d 670 // in is then checked against the current limit, and if it's
mjr 44:b5ac89b9cd5d 671 // outside of the limit, we reset the limit to the new reading.
mjr 44:b5ac89b9cd5d 672 void begin()
mjr 44:b5ac89b9cd5d 673 {
mjr 48:058ace2aed1d 674 min = 0; // we don't calibrate the maximum forward position, so keep this at zero
mjr 48:058ace2aed1d 675 zero = 0xffff; // set the zero position all the way back
mjr 48:058ace2aed1d 676 max = 0; // set the retracted position all the way forward
mjr 52:8298b2a73eb2 677 tRelease = 65; // revert to a default release time
mjr 35:e959ffba78fd 678 }
mjr 17:ab3cec0c8bf4 679
mjr 35:e959ffba78fd 680 } cal;
mjr 18:5e890ebd0023 681
mjr 35:e959ffba78fd 682 } plunger;
mjr 29:582472d0bc57 683
mjr 35:e959ffba78fd 684
mjr 35:e959ffba78fd 685 // --- TV ON SWITCH ---
mjr 35:e959ffba78fd 686 //
mjr 35:e959ffba78fd 687 // To use the TV ON switch feature, the special power sensing circuitry
mjr 35:e959ffba78fd 688 // implemented on the Expansion Board must be attached (or an equivalent
mjr 35:e959ffba78fd 689 // circuit, as described in the Build Guide). The circuitry lets us
mjr 35:e959ffba78fd 690 // detect power state changes on the secondary power supply.
mjr 35:e959ffba78fd 691 struct
mjr 35:e959ffba78fd 692 {
mjr 35:e959ffba78fd 693 // PSU2 power status sense (DigitalIn pin). This pin goes LOW when the
mjr 35:e959ffba78fd 694 // secondary power supply is turned off, and remains LOW until the LATCH
mjr 35:e959ffba78fd 695 // pin is raised high AND the secondary PSU is turned on. Once HIGH,
mjr 35:e959ffba78fd 696 // it remains HIGH as long as the secondary PSU is on.
mjr 53:9b2611964afc 697 uint8_t statusPin;
mjr 35:e959ffba78fd 698
mjr 35:e959ffba78fd 699 // PSU2 power status latch (DigitalOut pin)
mjr 53:9b2611964afc 700 uint8_t latchPin;
mjr 35:e959ffba78fd 701
mjr 35:e959ffba78fd 702 // TV ON relay pin (DigitalOut pin). This pin controls the TV switch
mjr 35:e959ffba78fd 703 // relay. Raising the pin HIGH turns the relay ON (energizes the coil).
mjr 53:9b2611964afc 704 uint8_t relayPin;
mjr 35:e959ffba78fd 705
mjr 40:cc0d9814522b 706 // TV ON delay time, in 1/100 second units. This is the interval between
mjr 40:cc0d9814522b 707 // sensing that the secondary power supply has turned on and pulsing the
mjr 40:cc0d9814522b 708 // TV ON switch relay.
mjr 40:cc0d9814522b 709 int delayTime;
mjr 35:e959ffba78fd 710
mjr 35:e959ffba78fd 711 } TVON;
mjr 35:e959ffba78fd 712
mjr 53:9b2611964afc 713 // --- Night Mode ---
mjr 53:9b2611964afc 714 struct
mjr 53:9b2611964afc 715 {
mjr 55:4db125cd11a0 716 uint8_t btn; // night mode button number (1..MAX_BUTTONS, 0 = no button)
mjr 53:9b2611964afc 717 uint8_t flags; // flags:
mjr 53:9b2611964afc 718 // 0x01 = on/off switch (if not set, it's a momentary button)
mjr 55:4db125cd11a0 719 uint8_t port; // indicator output port number (1..MAX_OUT_PORTS, 0 = no indicator)
mjr 53:9b2611964afc 720 } nightMode;
mjr 53:9b2611964afc 721
mjr 29:582472d0bc57 722
mjr 35:e959ffba78fd 723 // --- TLC5940NT PWM Controller Chip Setup ---
mjr 35:e959ffba78fd 724 struct
mjr 35:e959ffba78fd 725 {
mjr 35:e959ffba78fd 726 // number of TLC5940NT chips connected in daisy chain
mjr 35:e959ffba78fd 727 int nchips;
mjr 35:e959ffba78fd 728
mjr 53:9b2611964afc 729 // pin connections (wire pin IDs)
mjr 53:9b2611964afc 730 uint8_t sin; // Serial data - must connect to SPIO MOSI -> PTC6 or PTD2
mjr 53:9b2611964afc 731 uint8_t sclk; // Serial clock - must connect to SPIO SCLK -> PTC5 or PTD1
mjr 35:e959ffba78fd 732 // (but don't use PTD1, since it's hard-wired to the on-board blue LED)
mjr 53:9b2611964afc 733 uint8_t xlat; // XLAT (latch) signal - connect to any GPIO pin
mjr 53:9b2611964afc 734 uint8_t blank; // BLANK signal - connect to any GPIO pin
mjr 53:9b2611964afc 735 uint8_t gsclk; // Grayscale clock - must connect to a PWM-out capable pin
mjr 29:582472d0bc57 736
mjr 35:e959ffba78fd 737 } tlc5940;
mjr 35:e959ffba78fd 738
mjr 35:e959ffba78fd 739
mjr 35:e959ffba78fd 740 // --- 74HC595 Shift Register Setup ---
mjr 35:e959ffba78fd 741 struct
mjr 35:e959ffba78fd 742 {
mjr 35:e959ffba78fd 743 // number of 74HC595 chips attached in daisy chain
mjr 35:e959ffba78fd 744 int nchips;
mjr 35:e959ffba78fd 745
mjr 35:e959ffba78fd 746 // pin connections
mjr 53:9b2611964afc 747 uint8_t sin; // Serial data - use any GPIO pin
mjr 53:9b2611964afc 748 uint8_t sclk; // Serial clock - use any GPIO pin
mjr 53:9b2611964afc 749 uint8_t latch; // Latch - use any GPIO pin
mjr 53:9b2611964afc 750 uint8_t ena; // Enable signal - use any GPIO pin
mjr 35:e959ffba78fd 751
mjr 35:e959ffba78fd 752 } hc595;
mjr 77:0b96f6867312 753
mjr 77:0b96f6867312 754
mjr 77:0b96f6867312 755 // --- IR Remote Control Hardware Setup ---
mjr 77:0b96f6867312 756 struct
mjr 77:0b96f6867312 757 {
mjr 77:0b96f6867312 758 // sensor (receiver) GPIO input pin; must be interrupt-capable
mjr 77:0b96f6867312 759 uint8_t sensor;
mjr 77:0b96f6867312 760
mjr 77:0b96f6867312 761 // IR emitter LED GPIO output pin; must be PWM-capable
mjr 77:0b96f6867312 762 uint8_t emitter;
mjr 77:0b96f6867312 763 } IR;
mjr 77:0b96f6867312 764
mjr 77:0b96f6867312 765
mjr 35:e959ffba78fd 766 // --- Button Input Setup ---
mjr 65:739875521aae 767 ButtonCfg button[MAX_BUTTONS + VIRTUAL_BUTTONS] __attribute__((packed));
mjr 66:2e3583fbd2f4 768
mjr 66:2e3583fbd2f4 769 // Shift button index. If this is zero, there's no shift button. If this
mjr 66:2e3583fbd2f4 770 // is nonzero, it's the 1-based index of the shift button in the button[]
mjr 66:2e3583fbd2f4 771 // list.
mjr 66:2e3583fbd2f4 772 //
mjr 66:2e3583fbd2f4 773 // The shift button can also be used as a regular input key. If it is,
mjr 66:2e3583fbd2f4 774 // we DON'T send the input key to the PC as usual when the button is
mjr 66:2e3583fbd2f4 775 // pressed. Instead, we wait to see if the shift function is used:
mjr 66:2e3583fbd2f4 776 //
mjr 66:2e3583fbd2f4 777 // - If another button is pressed while the shift button is held down,
mjr 66:2e3583fbd2f4 778 // and the other button is programmed with a valid key for the shifted/
mjr 66:2e3583fbd2f4 779 // secondary meaning (i.e., typ2 is not BtnTypeNone), the shift function
mjr 66:2e3583fbd2f4 780 // is considered to have been used. We send the secondary meaning of
mjr 66:2e3583fbd2f4 781 // the other button to the PC. The shift key itself generates no PC
mjr 66:2e3583fbd2f4 782 // input in this case, since it has now performed its shift function.
mjr 66:2e3583fbd2f4 783 // Other shifted keys can also be pressed as long as the shift button
mjr 66:2e3583fbd2f4 784 // is held down, and they'll be sent to the PC with their shifted values
mjr 66:2e3583fbd2f4 785 // as well.
mjr 66:2e3583fbd2f4 786 //
mjr 66:2e3583fbd2f4 787 // - If the shift button is released before any other button with a
mjr 66:2e3583fbd2f4 788 // shifted key value is pressed, then the shift button press is taken to
mjr 66:2e3583fbd2f4 789 // be an ordinary key press instead of the shift function. In this case,
mjr 66:2e3583fbd2f4 790 // we report the shift button's key code to the PC when the button is
mjr 66:2e3583fbd2f4 791 // released. We can't report the key code to the PC until then because
mjr 66:2e3583fbd2f4 792 // we don't know until then that another key won't be pressed first.
mjr 66:2e3583fbd2f4 793 // The key press on release is a single timed pulse that's long enough
mjr 66:2e3583fbd2f4 794 // to register as a single key press on the PC, but not long enough to
mjr 66:2e3583fbd2f4 795 // trigger auto-repeat on the PC.
mjr 66:2e3583fbd2f4 796 uint8_t shiftButton;
mjr 17:ab3cec0c8bf4 797
mjr 35:e959ffba78fd 798 // --- LedWiz Output Port Setup ---
mjr 77:0b96f6867312 799 LedWizPortCfg outPort[MAX_OUT_PORTS] __attribute__ ((packed)); // LedWiz & extended output ports
mjr 48:058ace2aed1d 800
mjr 77:0b96f6867312 801 // --- IR Command Slots ---
mjr 77:0b96f6867312 802 IRCommandCfg IRCommand[MAX_IR_CODES] __attribute__ ((packed));
mjr 17:ab3cec0c8bf4 803 };
mjr 17:ab3cec0c8bf4 804
mjr 35:e959ffba78fd 805 #endif