Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Dependents: DISCO_IOT-wifi_client
Fork of stm-spirit1-rf-driver by
README.md@56:f9d8d8bb503f, 2017-04-07 (annotated)
- Committer:
- Wolfgang Betz
- Date:
- Fri Apr 07 10:12:00 2017 +0200
- Revision:
- 56:f9d8d8bb503f
- Parent:
- 55:2bfbf1d07c14
Minor change in `README.md`
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Wolfgang Betz |
50:7f70089ba05f | 1 | # Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 Module for STM32 Nucleo # |
Wolfgang Betz |
50:7f70089ba05f | 2 | |
Wolfgang Betz |
50:7f70089ba05f | 3 | Currently supported boards: |
Wolfgang Betz |
50:7f70089ba05f | 4 | * [X-NUCLEO-IDS01A4](http://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-connect-hw/x-nucleo-ids01a4.html) |
Wolfgang Betz |
50:7f70089ba05f | 5 | |
Wolfgang Betz |
50:7f70089ba05f | 6 | **Note**, in order to use expansion board `X-NUCLEO-IDS01A4` in mbed you need to perform the following HW modifications on the board: |
Wolfgang Betz |
50:7f70089ba05f | 7 | * **Un**mount resistor `R4` |
Wolfgang Betz |
50:7f70089ba05f | 8 | * **Mount** resistor `R7` |
Wolfgang Betz |
50:7f70089ba05f | 9 | |
Wolfgang Betz |
55:2bfbf1d07c14 | 10 | Furthermore, on some Nucleo development boards (e.g. the [NUCLEO_F429ZI](https://developer.mbed.org/platforms/ST-Nucleo-F429ZI/)), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro `SPIRIT1_SPI_MOSI=PB_5` defined, while the development board typically requires some HW modification as e.g. described [here](https://github.com/ARMmbed/sal-nanostack-driver-stm32-eth)! |
Wolfgang Betz |
50:7f70089ba05f | 11 | |
Wolfgang Betz |
56:f9d8d8bb503f | 12 | This driver can be used together with the 6LoWPAN stack (*a.k.a.* Nanostack). |