Diff: arch/lpc_phy_dp83848.c

Revision:

0:f4db29eb9e47

Child:

1:0c9d93e2f51c

diff -r 000000000000 -r f4db29eb9e47 arch/lpc_phy_dp83848.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/arch/lpc_phy_dp83848.c	Fri Jun 22 09:32:29 2012 +0000
@@ -0,0 +1,287 @@
+/**********************************************************************
+* $Id$        lpc_phy_dp83848.c            2011-11-20
+*//**
+* @file        lpc_phy_dp83848.c
+* @brief    DP83848C PHY status and control.
+* @version    1.0
+* @date        20 Nov. 2011
+* @author    NXP MCU SW Application Team
+*
+* Copyright(C) 2011, NXP Semiconductor
+* All rights reserved.
+*
+***********************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+**********************************************************************/
+
+#include "lwip/opt.h"
+#include "lwip/err.h"
+#include "lwip/tcpip.h"
+#include "lwip/snmp.h"
+#include "lpc_emac_config.h"
+#include "lpc_phy.h"
+
+/** @defgroup dp83848_phy    PHY status and control for the DP83848.
+ * @ingroup lwip_phy
+ *
+ * Various functions for controlling and monitoring the status of the
+ * DP83848 PHY. In polled (standalone) systems, the PHY state must be
+ * monitored as part of the application. In a threaded (RTOS) system,
+ * the PHY state is monitored by the PHY handler thread. The MAC
+ * driver will not transmit unless the PHY link is active.
+ * @{
+ */
+
+/** \brief  DP83848 PHY register offsets */
+#define DP8_BMCR_REG        0x0  /**< Basic Mode Control Register */
+#define DP8_BMSR_REG        0x1  /**< Basic Mode Status Reg */
+#define DP8_ANADV_REG       0x4  /**< Auto_Neg Advt Reg  */
+#define DP8_ANLPA_REG       0x5  /**< Auto_neg Link Partner Ability Reg */
+#define DP8_ANEEXP_REG      0x6  /**< Auto-neg Expansion Reg  */
+#define DP8_PHY_STAT_REG    0x10 /**< PHY Status Register  */
+#define DP8_PHY_INT_CTL_REG 0x11 /**< PHY Interrupt Control Register */
+#define DP8_PHY_RBR_REG     0x17 /**< PHY RMII and Bypass Register  */
+#define DP8_PHY_STS_REG     0x19 /**< PHY Status Register  */
+
+/** \brief DP83848 Control register definitions */
+#define DP8_RESET          (1 << 15)  /**< 1= S/W Reset */
+#define DP8_LOOPBACK       (1 << 14)  /**< 1=loopback Enabled */
+#define DP8_SPEED_SELECT   (1 << 13)  /**< 1=Select 100MBps */
+#define DP8_AUTONEG        (1 << 12)  /**< 1=Enable auto-negotiation */
+#define DP8_POWER_DOWN     (1 << 11)  /**< 1=Power down PHY */
+#define DP8_ISOLATE        (1 << 10)  /**< 1=Isolate PHY */
+#define DP8_RESTART_AUTONEG (1 << 9)  /**< 1=Restart auto-negoatiation */
+#define DP8_DUPLEX_MODE    (1 << 8)   /**< 1=Full duplex mode */
+#define DP8_COLLISION_TEST (1 << 7)   /**< 1=Perform collsion test */
+
+/** \brief DP83848 Status register definitions */
+#define DP8_100BASE_T4     (1 << 15)  /**< T4 mode */
+#define DP8_100BASE_TX_FD  (1 << 14)  /**< 100MBps full duplex */
+#define DP8_100BASE_TX_HD  (1 << 13)  /**< 100MBps half duplex */
+#define DP8_10BASE_T_FD    (1 << 12)  /**< 100Bps full duplex */
+#define DP8_10BASE_T_HD    (1 << 11)  /**< 10MBps half duplex */
+#define DP8_MF_PREAMB_SUPPR (1 << 6)  /**< Preamble suppress */
+#define DP8_AUTONEG_COMP   (1 << 5)   /**< Auto-negotation complete */
+#define DP8_RMT_FAULT      (1 << 4)   /**< Fault */
+#define DP8_AUTONEG_ABILITY (1 << 3)  /**< Auto-negotation supported */
+#define DP8_LINK_STATUS    (1 << 2)   /**< 1=Link active */
+#define DP8_JABBER_DETECT  (1 << 1)   /**< Jabber detect */
+#define DP8_EXTEND_CAPAB   (1 << 0)   /**< Supports extended capabilities */
+
+/** \brief DP83848 PHY RBR MII dode definitions */
+#define DP8_RBR_RMII_MODE  (1 << 5)   /**< Use RMII mode */
+
+/** \brief DP83848 PHY status definitions */
+#define DP8_REMOTEFAULT    (1 << 6)   /**< Remote fault */
+#define DP8_FULLDUPLEX     (1 << 2)   /**< 1=full duplex */
+#define DP8_SPEED10MBPS    (1 << 1)   /**< 1=10MBps speed */
+#define DP8_VALID_LINK     (1 << 0)   /**< 1=Link active */
+
+/** \brief DP83848 PHY ID register definitions */
+#define DP8_PHYID1_OUI     0x2000     /**< Expected PHY ID1 */
+#define DP8_PHYID2_OUI     0x5c90     /**< Expected PHY ID2 */
+
+/** \brief PHY status structure used to indicate current status of PHY.
+ */
+typedef struct {
+    u32_t     phy_speed_100mbs:1; /**< 10/100 MBS connection speed flag. */
+    u32_t     phy_full_duplex:1;  /**< Half/full duplex connection speed flag. */
+    u32_t     phy_link_active:1;  /**< Phy link active flag. */
+} PHY_STATUS_TYPE;
+
+/** \brief  PHY update flags */
+static PHY_STATUS_TYPE physts;
+
+/** \brief  Last PHY update flags, used for determing if something has changed */
+static PHY_STATUS_TYPE olddphysts;
+
+/** \brief  PHY update counter for state machine */
+static s32_t phyustate;
+
+/** \brief  Update PHY status from passed value
+ *
+ *  This function updates the current PHY status based on the
+ *  passed PHY status word. The PHY status indicate if the link
+ *  is active, the connection speed, and duplex.
+ *
+ *  \param[in]    netif   NETIF structure
+ *  \param[in]    linksts Status word from PHY
+ *  \return        1 if the status has changed, otherwise 0
+ */
+static s32_t lpc_update_phy_sts(struct netif *netif, u32_t linksts)
+{
+    s32_t changed = 0;
+
+    /* Update link active status */
+    if (linksts & DP8_VALID_LINK)
+        physts.phy_link_active = 1;
+    else
+        physts.phy_link_active = 0;
+
+    /* Full or half duplex */
+    if (linksts & DP8_FULLDUPLEX)
+        physts.phy_full_duplex = 1;
+    else
+        physts.phy_full_duplex = 0;
+
+    /* Configure 100MBit/10MBit mode. */
+    if (linksts & DP8_SPEED10MBPS)
+        physts.phy_speed_100mbs = 0;
+    else
+        physts.phy_speed_100mbs = 1;
+
+    if (physts.phy_speed_100mbs != olddphysts.phy_speed_100mbs) {
+        changed = 1;
+        if (physts.phy_speed_100mbs) {
+            /* 100MBit mode. */
+            lpc_emac_set_speed(1);
+
+            NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 100000000);
+        }
+        else {
+            /* 10MBit mode. */
+            lpc_emac_set_speed(0);
+
+            NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 10000000);
+        }
+
+        olddphysts.phy_speed_100mbs = physts.phy_speed_100mbs;
+    }
+
+    if (physts.phy_full_duplex != olddphysts.phy_full_duplex) {
+        changed = 1;
+        if (physts.phy_full_duplex)
+            lpc_emac_set_duplex(1);
+        else
+            lpc_emac_set_duplex(0);
+
+        olddphysts.phy_full_duplex = physts.phy_full_duplex;
+    }
+
+    if (physts.phy_link_active != olddphysts.phy_link_active) {
+        changed = 1;
+#if NO_SYS == 1
+        if (physts.phy_link_active)
+            netif_set_link_up(netif);
+        else
+            netif_set_link_down(netif);
+#else
+        if (physts.phy_link_active)
+            tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_up,
+                (void*) netif, 1);
+         else
+            tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_down,
+                (void*) netif, 1);
+#endif
+
+        olddphysts.phy_link_active = physts.phy_link_active;
+    }
+
+    return changed;
+}
+
+/** \brief  Initialize the DP83848 PHY.
+ *
+ *  This function initializes the DP83848 PHY. It will block until
+ *  complete. This function is called as part of the EMAC driver
+ *  initialization. Configuration of the PHY at startup is
+ *  controlled by setting up configuration defines in lpc_phy.h.
+ *
+ *  \param[in]     netif   NETIF structure
+ *  \param[in]     rmii    If set, configures the PHY for RMII mode
+ *  \return        ERR_OK if the setup was successful, otherwise ERR_TIMEOUT
+ */
+err_t lpc_phy_init(struct netif *netif, int rmii)
+{
+    u32_t tmp;
+    s32_t i;
+
+    physts.phy_speed_100mbs = olddphysts.phy_speed_100mbs = 2;
+    physts.phy_full_duplex = olddphysts.phy_full_duplex = 2;
+    physts.phy_link_active = olddphysts.phy_link_active = 2;
+    phyustate = 0;
+
+    /* Only first read and write are checked for failure */
+    /* Put the DP83848C in reset mode and wait for completion */
+    if (lpc_mii_write(DP8_BMCR_REG, DP8_RESET) != 0)
+        return ERR_TIMEOUT;
+    i = 400;
+    while (i > 0) {
+        msDelay(1);   /* 1 ms */
+        if (lpc_mii_read(DP8_BMCR_REG, &tmp) != 0)
+            return ERR_TIMEOUT;
+
+        if (!(tmp & (DP8_RESET | DP8_POWER_DOWN)))
+            i = -1;
+        else
+            i--;
+    }
+    /* Timeout? */
+    if (i == 0)
+        return ERR_TIMEOUT;
+
+    /* Setup link based on configuration options */
+#if PHY_USE_AUTONEG==1
+    tmp = DP8_AUTONEG;
+#else
+    tmp = 0;
+#endif
+#if PHY_USE_100MBS==1
+    tmp |= DP8_SPEED_SELECT;
+#endif
+#if PHY_USE_FULL_DUPLEX==1
+    tmp |= DP8_DUPLEX_MODE;
+#endif
+
+    lpc_mii_write(DP8_BMCR_REG, tmp);
+
+    /* Enable RMII mode for PHY */
+    if (rmii)
+        lpc_mii_write(DP8_PHY_RBR_REG, DP8_RBR_RMII_MODE);
+
+    /* The link is not set active at this point, but will be detected
+       later */
+
+    return ERR_OK;
+}
+
+/* Phy status update state machine */
+s32_t lpc_phy_sts_sm(struct netif *netif)
+{
+    s32_t changed = 0;
+
+    switch (phyustate) {
+        default:
+        case 0:
+            /* Read BMSR to clear faults */
+            lpc_mii_read_noblock(DP8_PHY_STAT_REG);
+            phyustate = 1;
+            break;
+
+        case 1:
+            /* Wait for read status state */
+            if (!lpc_mii_is_busy()) {
+                /* Update PHY status */
+                changed = lpc_update_phy_sts(netif, lpc_mii_read_data());
+                phyustate = 0;
+            }
+            break;
+    }
+
+    return changed;
+}
+
+/**
+ * @}
+ */
+
+/* --------------------------------- End Of File ------------------------------ */