Doug Anson
patched lwip-eth with https://github.com/mbedmicro/mbed/commit/8222bde1af2e328e4c58d0f438827f3091e5e0eb
Fork of
lwip-eth
by 
mbed official
Diff: arch/lpc17_emac.c
- Revision:
- 3:dd8b8f5b449a
- Parent:
- 2:5208926bd863
- Child:
- 4:d827a085afd9
--- a/arch/lpc17_emac.c Fri Jun 22 11:57:39 2012 +0000
+++ b/arch/lpc17_emac.c Mon Jul 23 11:52:41 2012 +0000
@@ -1,1042 +1,1043 @@
-/**********************************************************************
-* $Id$ lpc17_emac.c 2011-11-20
-*//**
-* @file lpc17_emac.c
-* @brief LPC17 ethernet driver for LWIP
-* @version 1.0
-* @date 20. Nov. 2011
-* @author NXP MCU SW Application Team
-*
-* Copyright(C) 2011, NXP Semiconductor
-* All rights reserved.
-*
-***********************************************************************
-* Software that is described herein is for illustrative purposes only
-* which provides customers with programming information regarding the
-* products. This software is supplied "AS IS" without any warranties.
-* NXP Semiconductors assumes no responsibility or liability for the
-* use of the software, conveys no license or title under any patent,
-* copyright, or mask work right to the product. NXP Semiconductors
-* reserves the right to make changes in the software without
-* notification. NXP Semiconductors also make no representation or
-* warranty that such application will be suitable for the specified
-* use without further testing or modification.
-**********************************************************************/
-
-#include "lwip/opt.h"
-#include "lwip/sys.h"
-#include "lwip/def.h"
-#include "lwip/mem.h"
-#include "lwip/pbuf.h"
-#include "lwip/stats.h"
-#include "lwip/snmp.h"
-#include "netif/etharp.h"
-#include "netif/ppp_oe.h"
-
-#include "lpc17xx_emac.h"
-#include "lpc17_emac.h"
-#include "lpc_emac_config.h"
-#include "lpc_phy.h"
-#include "sys_arch.h"
-
-#include "mbed_interface.h"
-#include <string.h>
-
-#ifndef LPC_EMAC_RMII
-#error LPC_EMAC_RMII is not defined!
-#endif
-
-#if LPC_NUM_BUFF_TXDESCS < 2
-#error LPC_NUM_BUFF_TXDESCS must be at least 2
-#endif
-
-#if LPC_NUM_BUFF_RXDESCS < 3
-#error LPC_NUM_BUFF_RXDESCS must be at least 3
-#endif
-
-/** @defgroup lwip17xx_emac_DRIVER lpc17 EMAC driver for LWIP
- * @ingroup lwip_emac
- *
- * @{
- */
-
-#if NO_SYS == 0
-/** \brief Driver transmit and receive thread priorities
- *
- * Thread priorities for receive thread and TX cleanup thread. Alter
- * to prioritize receive or transmit bandwidth. In a heavily loaded
- * system or with LEIP_DEBUG enabled, the priorities might be better
- * the same. */
-#define RX_PRIORITY (osPriorityNormal)
-#define TX_PRIORITY (osPriorityNormal)
-
-/** \brief Debug output formatter lock define
- *
- * When using FreeRTOS and with LWIP_DEBUG enabled, enabling this
- * define will allow RX debug messages to not interleave with the
- * TX messages (so they are actually readable). Not enabling this
- * define when the system is under load will cause the output to
- * be unreadable. There is a small tradeoff in performance for this
- * so use it only for debug. */
-//#define LOCK_RX_THREAD
-
-/** \brief Receive group interrupts
- */
-#define RXINTGROUP (EMAC_INT_RX_OVERRUN | EMAC_INT_RX_ERR | EMAC_INT_RX_DONE)
-
-/** \brief Transmit group interrupts
- */
-#define TXINTGROUP (EMAC_INT_TX_UNDERRUN | EMAC_INT_TX_ERR | EMAC_INT_TX_DONE)
-#else
-#define RXINTGROUP 0
-#define TXINTGROUP 0
-#endif
-
- /** \brief Structure of a TX/RX descriptor
- */
-typedef struct
-{
- volatile u32_t packet; /**< Pointer to buffer */
- volatile u32_t control; /**< Control word */
-} LPC_TXRX_DESC_T;
-
-/** \brief Structure of a RX status entry
- */
-typedef struct
-{
- volatile u32_t statusinfo; /**< RX status word */
- volatile u32_t statushashcrc; /**< RX hash CRC */
-} LPC_TXRX_STATUS_T;
-
-/* LPC EMAC driver data structure */
-struct lpc_enetdata {
- /* prxs must be 8 byte aligned! */
- LPC_TXRX_STATUS_T prxs[LPC_NUM_BUFF_RXDESCS]; /**< Pointer to RX statuses */
- struct netif *netif; /**< Reference back to LWIP parent netif */
- LPC_TXRX_DESC_T ptxd[LPC_NUM_BUFF_TXDESCS]; /**< Pointer to TX descriptor list */
- LPC_TXRX_STATUS_T ptxs[LPC_NUM_BUFF_TXDESCS]; /**< Pointer to TX statuses */
- LPC_TXRX_DESC_T prxd[LPC_NUM_BUFF_RXDESCS]; /**< Pointer to RX descriptor list */
- struct pbuf *rxb[LPC_NUM_BUFF_RXDESCS]; /**< RX pbuf pointer list, zero-copy mode */
- u32_t rx_fill_desc_index; /**< RX descriptor next available index */
- volatile u32_t rx_free_descs; /**< Count of free RX descriptors */
- struct pbuf *txb[LPC_NUM_BUFF_TXDESCS]; /**< TX pbuf pointer list, zero-copy mode */
- u32_t lpc_last_tx_idx; /**< TX last descriptor index, zero-copy mode */
-#if NO_SYS == 0
- sys_sem_t RxSem; /**< RX receive thread wakeup semaphore */
- sys_sem_t TxCleanSem; /**< TX cleanup thread wakeup semaphore */
- sys_mutex_t TXLockMutex; /**< TX critical section mutex */
- sys_sem_t xTXDCountSem; /**< TX free buffer counting semaphore */
-#endif
-};
-
-/** \brief LPC EMAC driver work data
- */
-ALIGNED(8) struct lpc_enetdata lpc_enetdata;
-
-/* Write a value via the MII link (non-blocking) */
-void lpc_mii_write_noblock(u32_t PhyReg, u32_t Value)
-{
- /* Write value at PHY address and register */
- LPC_EMAC->MADR = (LPC_PHYDEF_PHYADDR << 8) | PhyReg;
- LPC_EMAC->MWTD = Value;
-}
-
-/* Write a value via the MII link (blocking) */
-err_t lpc_mii_write(u32_t PhyReg, u32_t Value)
-{
- u32_t mst = 250;
- err_t sts = ERR_OK;
-
- /* Write value at PHY address and register */
- lpc_mii_write_noblock(PhyReg, Value);
-
- /* Wait for unbusy status */
- while (mst > 0) {
- sts = LPC_EMAC->MIND;
- if ((sts & EMAC_MIND_BUSY) == 0)
- mst = 0;
- else {
- mst--;
- osDelay(1);
- }
- }
-
- if (sts != 0)
- sts = ERR_TIMEOUT;
-
- return sts;
-}
-
-/* Reads current MII link busy status */
-u32_t lpc_mii_is_busy(void)
-{
- return (u32_t) (LPC_EMAC->MIND & EMAC_MIND_BUSY);
-}
-
-/* Starts a read operation via the MII link (non-blocking) */
-u32_t lpc_mii_read_data(void)
-{
- u32_t data = LPC_EMAC->MRDD;
- LPC_EMAC->MCMD = 0;
-
- return data;
-}
-
-/* Starts a read operation via the MII link (non-blocking) */
-void lpc_mii_read_noblock(u32_t PhyReg)
-{
- /* Read value at PHY address and register */
- LPC_EMAC->MADR = (LPC_PHYDEF_PHYADDR << 8) | PhyReg;
- LPC_EMAC->MCMD = EMAC_MCMD_READ;
-}
-
-/* Read a value via the MII link (blocking) */
-err_t lpc_mii_read(u32_t PhyReg, u32_t *data)
-{
- u32_t mst = 250;
- err_t sts = ERR_OK;
-
- /* Read value at PHY address and register */
- lpc_mii_read_noblock(PhyReg);
-
- /* Wait for unbusy status */
- while (mst > 0) {
- sts = LPC_EMAC->MIND & ~EMAC_MIND_MII_LINK_FAIL;
- if ((sts & EMAC_MIND_BUSY) == 0) {
- mst = 0;
- *data = LPC_EMAC->MRDD;
- } else {
- mst--;
- osDelay(1);
- }
- }
-
- LPC_EMAC->MCMD = 0;
-
- if (sts != 0)
- sts = ERR_TIMEOUT;
-
- return sts;
-}
-
-/** \brief Queues a pbuf into the RX descriptor list
- *
- * \param[in] lpc_enetif Pointer to the drvier data structure
- * \param[in] p Pointer to pbuf to queue
- */
-static void lpc_rxqueue_pbuf(struct lpc_enetdata *lpc_enetif, struct pbuf *p)
-{
- u32_t idx;
-
- /* Get next free descriptor index */
- idx = lpc_enetif->rx_fill_desc_index;
-
- /* Setup descriptor and clear statuses */
- lpc_enetif->prxd[idx].control = EMAC_RCTRL_INT | ((u32_t) (p->len - 1));
- lpc_enetif->prxd[idx].packet = (u32_t) p->payload;
- lpc_enetif->prxs[idx].statusinfo = 0xFFFFFFFF;
- lpc_enetif->prxs[idx].statushashcrc = 0xFFFFFFFF;
-
- /* Save pbuf pointer for push to network layer later */
- lpc_enetif->rxb[idx] = p;
-
- /* Wrap at end of descriptor list */
- idx++;
- if (idx >= LPC_NUM_BUFF_RXDESCS)
- idx = 0;
-
- /* Queue descriptor(s) */
- lpc_enetif->rx_free_descs -= 1;
- lpc_enetif->rx_fill_desc_index = idx;
- LPC_EMAC->RxConsumeIndex = idx;
-
- LWIP_DEBUGF(UDP_LPC_EMAC | LWIP_DBG_TRACE,
- ("lpc_rxqueue_pbuf: pbuf packet queued: %p (free desc=%d)\n", p,
- lpc_enetif->rx_free_descs));
-}
-
-/** \brief Attempt to allocate and requeue a new pbuf for RX
- *
- * \param[in] netif Pointer to the netif structure
- * \returns 1 if a packet was allocated and requeued, otherwise 0
- */
-s32_t lpc_rx_queue(struct netif *netif)
-{
- struct lpc_enetdata *lpc_enetif = netif->state;
- struct pbuf *p;
- s32_t queued = 0;
-
- /* Attempt to requeue as many packets as possible */
- while (lpc_enetif->rx_free_descs > 0) {
- /* Allocate a pbuf from the pool. We need to allocate at the
- maximum size as we don't know the size of the yet to be
- received packet. */
- p = pbuf_alloc(PBUF_RAW, (u16_t) EMAC_ETH_MAX_FLEN, PBUF_RAM);
- if (p == NULL) {
- LWIP_DEBUGF(UDP_LPC_EMAC | LWIP_DBG_TRACE,
- ("lpc_rx_queue: could not allocate RX pbuf (free desc=%d)\n",
- lpc_enetif->rx_free_descs));
- return queued;
- }
-
- /* pbufs allocated from the RAM pool should be non-chained. */
- LWIP_ASSERT("lpc_rx_queue: pbuf is not contiguous (chained)",
- pbuf_clen(p) <= 1);
-
- /* Queue packet */
- lpc_rxqueue_pbuf(lpc_enetif, p);
-
- /* Update queued count */
- queued++;
- }
-
- return queued;
-}
-
-/** \brief Sets up the RX descriptor ring buffers.
- *
- * This function sets up the descriptor list used for receive packets.
- *
- * \param[in] lpc_enetif Pointer to driver data structure
- * \returns Always returns ERR_OK
- */
-static err_t lpc_rx_setup(struct lpc_enetdata *lpc_enetif)
-{
- /* Setup pointers to RX structures */
- LPC_EMAC->RxDescriptor = (u32_t) &lpc_enetif->prxd[0];
- LPC_EMAC->RxStatus = (u32_t) &lpc_enetif->prxs[0];
- LPC_EMAC->RxDescriptorNumber = LPC_NUM_BUFF_RXDESCS - 1;
-
- lpc_enetif->rx_free_descs = LPC_NUM_BUFF_RXDESCS;
- lpc_enetif->rx_fill_desc_index = 0;
-
- /* Build RX buffer and descriptors */
- lpc_rx_queue(lpc_enetif->netif);
-
- return ERR_OK;
-}
-
-/** \brief Allocates a pbuf and returns the data from the incoming packet.
- *
- * \param[in] netif the lwip network interface structure for this lpc_enetif
- * \return a pbuf filled with the received packet (including MAC header)
- * NULL on memory error
- */
-static struct pbuf *lpc_low_level_input(struct netif *netif)
-{
- struct lpc_enetdata *lpc_enetif = netif->state;
- struct pbuf *p = NULL;
- u32_t idx, length;
-
-#ifdef LOCK_RX_THREAD
-#if NO_SYS == 0
- /* Get exclusive access */
- sys_mutex_lock(&lpc_enetif->TXLockMutex);
-#endif
-#endif
-
- /* Monitor RX overrun status. This should never happen unless
- (possibly) the internal bus is behing held up by something.
- Unless your system is running at a very low clock speed or
- there are possibilities that the internal buses may be held
- up for a long time, this can probably safely be removed. */
- if (LPC_EMAC->IntStatus & EMAC_INT_RX_OVERRUN) {
- LINK_STATS_INC(link.err);
- LINK_STATS_INC(link.drop);
-
- /* Temporarily disable RX */
- LPC_EMAC->MAC1 &= ~EMAC_MAC1_REC_EN;
-
- /* Reset the RX side */
- LPC_EMAC->MAC1 |= EMAC_MAC1_RES_RX;
- LPC_EMAC->IntClear = EMAC_INT_RX_OVERRUN;
-
- /* De-allocate all queued RX pbufs */
- for (idx = 0; idx < LPC_NUM_BUFF_RXDESCS; idx++) {
- if (lpc_enetif->rxb[idx] != NULL) {
- pbuf_free(lpc_enetif->rxb[idx]);
- lpc_enetif->rxb[idx] = NULL;
- }
- }
-
- /* Start RX side again */
- lpc_rx_setup(lpc_enetif);
-
- /* Re-enable RX */
- LPC_EMAC->MAC1 |= EMAC_MAC1_REC_EN;
-
-#ifdef LOCK_RX_THREAD
-#if NO_SYS == 0
- sys_mutex_unlock(&lpc_enetif->TXLockMutex);
-#endif
-#endif
-
- return NULL;
- }
-
- /* Determine if a frame has been received */
- length = 0;
- idx = LPC_EMAC->RxConsumeIndex;
- if (LPC_EMAC->RxProduceIndex != idx) {
- /* Handle errors */
- if (lpc_enetif->prxs[idx].statusinfo & (EMAC_RINFO_CRC_ERR |
- EMAC_RINFO_SYM_ERR | EMAC_RINFO_ALIGN_ERR | EMAC_RINFO_LEN_ERR)) {
-#if LINK_STATS
- if (lpc_enetif->prxs[idx].statusinfo & (EMAC_RINFO_CRC_ERR |
- EMAC_RINFO_SYM_ERR | EMAC_RINFO_ALIGN_ERR))
- LINK_STATS_INC(link.chkerr);
- if (lpc_enetif->prxs[idx].statusinfo & EMAC_RINFO_LEN_ERR)
- LINK_STATS_INC(link.lenerr);
-#endif
-
- /* Drop the frame */
- LINK_STATS_INC(link.drop);
-
- /* Re-queue the pbuf for receive */
- lpc_enetif->rx_free_descs++;
- p = lpc_enetif->rxb[idx];
- lpc_enetif->rxb[idx] = NULL;
- lpc_rxqueue_pbuf(lpc_enetif, p);
-
- LWIP_DEBUGF(UDP_LPC_EMAC | LWIP_DBG_TRACE,
- ("lpc_low_level_input: Packet dropped with errors (0x%x)\n",
- lpc_enetif->prxs[idx].statusinfo));
- } else {
- /* A packet is waiting, get length */
- length = (lpc_enetif->prxs[idx].statusinfo & 0x7FF) + 1;
-
- /* Zero-copy */
- p = lpc_enetif->rxb[idx];
- p->len = (u16_t) length;
-
- /* Free pbuf from desriptor */
- lpc_enetif->rxb[idx] = NULL;
- lpc_enetif->rx_free_descs++;
-
- LWIP_DEBUGF(UDP_LPC_EMAC | LWIP_DBG_TRACE,
- ("lpc_low_level_input: Packet received: %p, size %d (index=%d)\n",
- p, length, idx));
-
- /* Save size */
- p->tot_len = (u16_t) length;
- LINK_STATS_INC(link.recv);
-
- /* Queue new buffer(s) */
- lpc_rx_queue(lpc_enetif->netif);
- }
- }
-
-#ifdef LOCK_RX_THREAD
-#if NO_SYS == 0
- sys_mutex_unlock(&lpc_enetif->TXLockMutex);
-#endif
-#endif
-
- return p;
-}
-
-/** \brief Attempt to read a packet from the EMAC interface.
- *
- * \param[in] netif the lwip network interface structure for this lpc_enetif
- */
-void lpc_enetif_input(struct netif *netif)
-{
- struct eth_hdr *ethhdr;
- struct pbuf *p;
-
- /* move received packet into a new pbuf */
- p = lpc_low_level_input(netif);
- if (p == NULL)
- return;
-
- /* points to packet payload, which starts with an Ethernet header */
- ethhdr = p->payload;
-
- switch (htons(ethhdr->type)) {
- case ETHTYPE_IP:
- case ETHTYPE_ARP:
-#if PPPOE_SUPPORT
- case ETHTYPE_PPPOEDISC:
- case ETHTYPE_PPPOE:
-#endif /* PPPOE_SUPPORT */
- /* full packet send to tcpip_thread to process */
- if (netif->input(p, netif) != ERR_OK) {
- LWIP_DEBUGF(NETIF_DEBUG, ("lpc_enetif_input: IP input error\n"));
- /* Free buffer */
- pbuf_free(p);
- }
- break;
-
- default:
- /* Return buffer */
- pbuf_free(p);
- break;
- }
-}
-
-/** \brief Determine if the passed address is usable for the ethernet
- * DMA controller.
- *
- * \param[in] addr Address of packet to check for DMA safe operation
- * \return 1 if the packet address is not safe, otherwise 0
- */
-static s32_t lpc_packet_addr_notsafe(void *addr) {
- /* Check for legal address ranges */
- if ((((u32_t) addr >= 0x2007C000) && ((u32_t) addr < 0x20083FFF))) {
- return 0;
- }
- return 1;
-}
-
-/** \brief Sets up the TX descriptor ring buffers.
- *
- * This function sets up the descriptor list used for transmit packets.
- *
- * \param[in] lpc_enetif Pointer to driver data structure
- */
-static err_t lpc_tx_setup(struct lpc_enetdata *lpc_enetif)
-{
- s32_t idx;
-
- /* Build TX descriptors for local buffers */
- for (idx = 0; idx < LPC_NUM_BUFF_TXDESCS; idx++) {
- lpc_enetif->ptxd[idx].control = 0;
- lpc_enetif->ptxs[idx].statusinfo = 0xFFFFFFFF;
- }
-
- /* Setup pointers to TX structures */
- LPC_EMAC->TxDescriptor = (u32_t) &lpc_enetif->ptxd[0];
- LPC_EMAC->TxStatus = (u32_t) &lpc_enetif->ptxs[0];
- LPC_EMAC->TxDescriptorNumber = LPC_NUM_BUFF_TXDESCS - 1;
-
- lpc_enetif->lpc_last_tx_idx = 0;
-
- return ERR_OK;
-}
-
-/** \brief Free TX buffers that are complete
- *
- * \param[in] lpc_enetif Pointer to driver data structure
- * \param[in] cidx EMAC current descriptor comsumer index
- */
-static void lpc_tx_reclaim_st(struct lpc_enetdata *lpc_enetif, u32_t cidx)
-{
-#if NO_SYS == 0
- /* Get exclusive access */
- sys_mutex_lock(&lpc_enetif->TXLockMutex);
-#endif
-
- while (cidx != lpc_enetif->lpc_last_tx_idx) {
- if (lpc_enetif->txb[lpc_enetif->lpc_last_tx_idx] != NULL) {
- LWIP_DEBUGF(UDP_LPC_EMAC | LWIP_DBG_TRACE,
- ("lpc_tx_reclaim_st: Freeing packet %p (index %d)\n",
- lpc_enetif->txb[lpc_enetif->lpc_last_tx_idx],
- lpc_enetif->lpc_last_tx_idx));
- pbuf_free(lpc_enetif->txb[lpc_enetif->lpc_last_tx_idx]);
- lpc_enetif->txb[lpc_enetif->lpc_last_tx_idx] = NULL;
- }
-
-#if NO_SYS == 0
- osSemaphoreRelease(lpc_enetif->xTXDCountSem.id);
-#endif
- lpc_enetif->lpc_last_tx_idx++;
- if (lpc_enetif->lpc_last_tx_idx >= LPC_NUM_BUFF_TXDESCS)
- lpc_enetif->lpc_last_tx_idx = 0;
- }
-
-#if NO_SYS == 0
- /* Restore access */
- sys_mutex_unlock(&lpc_enetif->TXLockMutex);
-#endif
-}
-
-/** \brief User call for freeingTX buffers that are complete
- *
- * \param[in] netif the lwip network interface structure for this lpc_enetif
- */
-void lpc_tx_reclaim(struct netif *netif)
-{
- lpc_tx_reclaim_st((struct lpc_enetdata *) netif->state,
- LPC_EMAC->TxConsumeIndex);
-}
-
- /** \brief Polls if an available TX descriptor is ready. Can be used to
- * determine if the low level transmit function will block.
- *
- * \param[in] netif the lwip network interface structure for this lpc_enetif
- * \return 0 if no descriptors are read, or >0
- */
-s32_t lpc_tx_ready(struct netif *netif)
-{
- s32_t fb;
- u32_t idx, cidx;
-
- cidx = LPC_EMAC->TxConsumeIndex;
- idx = LPC_EMAC->TxProduceIndex;
-
- /* Determine number of free buffers */
- if (idx == cidx)
- fb = LPC_NUM_BUFF_TXDESCS;
- else if (cidx > idx)
- fb = (LPC_NUM_BUFF_TXDESCS - 1) -
- ((idx + LPC_NUM_BUFF_TXDESCS) - cidx);
- else
- fb = (LPC_NUM_BUFF_TXDESCS - 1) - (cidx - idx);
-
- return fb;
-}
-
-/** \brief Low level output of a packet. Never call this from an
- * interrupt context, as it may block until TX descriptors
- * become available.
- *
- * \param[in] netif the lwip network interface structure for this lpc_enetif
- * \param[in] p the MAC packet to send (e.g. IP packet including MAC addresses and type)
- * \return ERR_OK if the packet could be sent or an err_t value if the packet couldn't be sent
- */
-static err_t lpc_low_level_output(struct netif *netif, struct pbuf *p)
-{
- struct lpc_enetdata *lpc_enetif = netif->state;
- struct pbuf *q;
- u8_t *dst;
- u32_t idx;
- struct pbuf *np;
- u32_t dn, notdmasafe = 0;
-
- /* Zero-copy TX buffers may be fragmented across mutliple payload
- chains. Determine the number of descriptors needed for the
- transfer. The pbuf chaining can be a mess! */
- dn = (u32_t) pbuf_clen(p);
-
- /* Test to make sure packet addresses are DMA safe. A DMA safe
- address is once that uses external memory or periphheral RAM.
- IRAM and FLASH are not safe! */
- for (q = p; q != NULL; q = q->next)
- notdmasafe += lpc_packet_addr_notsafe(q->payload);
-
-#if LPC_TX_PBUF_BOUNCE_EN==1
- /* If the pbuf is not DMA safe, a new bounce buffer (pbuf) will be
- created that will be used instead. This requires an copy from the
- non-safe DMA region to the new pbuf */
- if (notdmasafe) {
- /* Allocate a pbuf in DMA memory */
- np = pbuf_alloc(PBUF_RAW, p->tot_len, PBUF_RAM);
- if (np == NULL)
- return ERR_MEM;
-
- /* This buffer better be contiguous! */
- LWIP_ASSERT("lpc_low_level_output: New transmit pbuf is chained",
- (pbuf_clen(np) == 1));
-
- /* Copy to DMA safe pbuf */
- dst = (u8_t *) np->payload;
- for(q = p; q != NULL; q = q->next) {
- /* Copy the buffer to the descriptor's buffer */
- MEMCPY(dst, (u8_t *) q->payload, q->len);
- dst += q->len;
- }
- np->len = p->tot_len;
-
- LWIP_DEBUGF(UDP_LPC_EMAC | LWIP_DBG_TRACE,
- ("lpc_low_level_output: Switched to DMA safe buffer, old=%p, new=%p\n",
- q, np));
-
- /* use the new buffer for descrptor queueing. The original pbuf will
- be de-allocated outsuide this driver. */
- p = np;
- dn = 1;
- }
-#else
- if (notdmasafe)
- LWIP_ASSERT("lpc_low_level_output: Not a DMA safe pbuf",
- (notdmasafe == 0));
-#endif
-
- /* Wait until enough descriptors are available for the transfer. */
- /* THIS WILL BLOCK UNTIL THERE ARE ENOUGH DESCRIPTORS AVAILABLE */
- while (dn > lpc_tx_ready(netif))
-#if NO_SYS == 0
- osSemaphoreWait(lpc_enetif->xTXDCountSem.id, osWaitForever);
-#else
- osDelay(1);
-#endif
-
- /* Get free TX buffer index */
- idx = LPC_EMAC->TxProduceIndex;
-
-#if NO_SYS == 0
- /* Get exclusive access */
- sys_mutex_lock(&lpc_enetif->TXLockMutex);
-#endif
-
- /* Prevent LWIP from de-allocating this pbuf. The driver will
- free it once it's been transmitted. */
- if (!notdmasafe)
- pbuf_ref(p);
-
- /* Setup transfers */
- q = p;
- while (dn > 0) {
- dn--;
-
- /* Only save pointer to free on last descriptor */
- if (dn == 0) {
- /* Save size of packet and signal it's ready */
- lpc_enetif->ptxd[idx].control = (q->len - 1) | EMAC_TCTRL_INT |
- EMAC_TCTRL_LAST;
- lpc_enetif->txb[idx] = p;
- }
- else {
- /* Save size of packet, descriptor is not last */
- lpc_enetif->ptxd[idx].control = (q->len - 1) | EMAC_TCTRL_INT;
- lpc_enetif->txb[idx] = NULL;
- }
-
- LWIP_DEBUGF(UDP_LPC_EMAC | LWIP_DBG_TRACE,
- ("lpc_low_level_output: pbuf packet(%p) sent, chain#=%d,"
- " size = %d (index=%d)\n", q->payload, dn, q->len, idx));
-
- lpc_enetif->ptxd[idx].packet = (u32_t) q->payload;
-
- q = q->next;
-
- idx++;
- if (idx >= LPC_NUM_BUFF_TXDESCS)
- idx = 0;
- }
-
- LPC_EMAC->TxProduceIndex = idx;
-
- LINK_STATS_INC(link.xmit);
-
-#if NO_SYS == 0
- /* Restore access */
- sys_mutex_unlock(&lpc_enetif->TXLockMutex);
-#endif
-
- return ERR_OK;
-}
-
-/** \brief LPC EMAC interrupt handler.
- *
- * This function handles the transmit, receive, and error interrupt of
- * the LPC177x_8x. This is meant to be used when NO_SYS=0.
- */
-void ENET_IRQHandler(void)
-{
-#if NO_SYS == 1
- /* Interrupts are not used without an RTOS */
- NVIC_DisableIRQ(ENET_IRQn);
-#else
- uint32_t ints;
-
- /* Interrupts are of 2 groups - transmit or receive. Based on the
- interrupt, kick off the receive or transmit (cleanup) task */
-
- /* Get pending interrupts */
- ints = LPC_EMAC->IntStatus;
-
- if (ints & RXINTGROUP) {
- /* RX group interrupt(s): Give semaphore to wakeup RX receive task.*/
- sys_sem_signal(&lpc_enetdata.RxSem);
- }
-
- if (ints & TXINTGROUP) {
- /* TX group interrupt(s): Give semaphore to wakeup TX cleanup task. */
- sys_sem_signal(&lpc_enetdata.TxCleanSem);
- }
-
- /* Clear pending interrupts */
- LPC_EMAC->IntClear = ints;
-#endif
-}
-
-#if NO_SYS == 0
-/** \brief Packet reception task
- *
- * This task is called when a packet is received. It will
- * pass the packet to the LWIP core.
- *
- * \param[in] pvParameters Not used yet
- */
-static void packet_rx(void* pvParameters) {
- struct lpc_enetdata *lpc_enetif = pvParameters;
-
- while (1) {
- /* Wait for receive task to wakeup */
- sys_arch_sem_wait(&lpc_enetif->RxSem, 0);
-
- /* Process packets until all empty */
- while (LPC_EMAC->RxConsumeIndex != LPC_EMAC->RxProduceIndex)
- lpc_enetif_input(lpc_enetif->netif);
- }
-}
-
-/** \brief Transmit cleanup task
- *
- * This task is called when a transmit interrupt occurs and
- * reclaims the pbuf and descriptor used for the packet once
- * the packet has been transferred.
- *
- * \param[in] pvParameters Not used yet
- */
-static void packet_tx(void* pvParameters) {
- struct lpc_enetdata *lpc_enetif = pvParameters;
- s32_t idx;
-
- while (1) {
- /* Wait for transmit cleanup task to wakeup */
- sys_arch_sem_wait(&lpc_enetif->TxCleanSem, 0);
-
- /* Error handling for TX underruns. This should never happen unless
- something is holding the bus or the clocks are going too slow. It
- can probably be safely removed. */
- if (LPC_EMAC->IntStatus & EMAC_INT_TX_UNDERRUN) {
- LINK_STATS_INC(link.err);
- LINK_STATS_INC(link.drop);
-
-#if NO_SYS == 0
- /* Get exclusive access */
- sys_mutex_lock(&lpc_enetif->TXLockMutex);
-#endif
- /* Reset the TX side */
- LPC_EMAC->MAC1 |= EMAC_MAC1_RES_TX;
- LPC_EMAC->IntClear = EMAC_INT_TX_UNDERRUN;
-
- /* De-allocate all queued TX pbufs */
- for (idx = 0; idx < LPC_NUM_BUFF_RXDESCS; idx++) {
- if (lpc_enetif->txb[idx] != NULL) {
- pbuf_free(lpc_enetif->txb[idx]);
- lpc_enetif->txb[idx] = NULL;
- }
- }
-
-#if NO_SYS == 0
- /* Restore access */
- sys_mutex_unlock(&lpc_enetif->TXLockMutex);
-#endif
- /* Start TX side again */
- lpc_tx_setup(lpc_enetif);
- } else {
- /* Free TX buffers that are done sending */
- lpc_tx_reclaim(lpc_enetdata.netif);
- }
- }
-}
-#endif
-
-/** \brief Low level init of the MAC and PHY.
- *
- * \param[in] netif Pointer to LWIP netif structure
- */
-static err_t low_level_init(struct netif *netif)
-{
- struct lpc_enetdata *lpc_enetif = netif->state;
- err_t err = ERR_OK;
-
- /* Enable MII clocking */
- LPC_SC->PCONP |= CLKPWR_PCONP_PCENET;
-
- LPC_PINCON->PINSEL2 = 0x50150105; /* Enable P1 Ethernet Pins. */
- LPC_PINCON->PINSEL3 = (LPC_PINCON->PINSEL3 & ~0x0000000F) | 0x00000005;
-
- /* Reset all MAC logic */
- LPC_EMAC->MAC1 = EMAC_MAC1_RES_TX | EMAC_MAC1_RES_MCS_TX |
- EMAC_MAC1_RES_RX | EMAC_MAC1_RES_MCS_RX | EMAC_MAC1_SIM_RES |
- EMAC_MAC1_SOFT_RES;
- LPC_EMAC->Command = EMAC_CR_REG_RES | EMAC_CR_TX_RES | EMAC_CR_RX_RES |
- EMAC_CR_PASS_RUNT_FRM;
- osDelay(10);
-
- /* Initial MAC initialization */
- LPC_EMAC->MAC1 = EMAC_MAC1_PASS_ALL;
- LPC_EMAC->MAC2 = EMAC_MAC2_CRC_EN | EMAC_MAC2_PAD_EN |
- EMAC_MAC2_VLAN_PAD_EN;
- LPC_EMAC->MAXF = EMAC_ETH_MAX_FLEN;
-
- /* Set RMII management clock rate to lowest speed */
- LPC_EMAC->MCFG = EMAC_MCFG_CLK_SEL(11) | EMAC_MCFG_RES_MII;
- LPC_EMAC->MCFG &= ~EMAC_MCFG_RES_MII;
-
- /* Maximum number of retries, 0x37 collision window, gap */
- LPC_EMAC->CLRT = EMAC_CLRT_DEF;
- LPC_EMAC->IPGR = EMAC_IPGR_P1_DEF | EMAC_IPGR_P2_DEF;
-
-#if LPC_EMAC_RMII
- /* RMII setup */
- LPC_EMAC->Command = EMAC_CR_PASS_RUNT_FRM | EMAC_CR_RMII;
-#else
- /* MII setup */
- LPC_EMAC->CR = EMAC_CR_PASS_RUNT_FRM;
-#endif
-
- /* Initialize the PHY and reset */
- err = lpc_phy_init(netif, LPC_EMAC_RMII);
- if (err != ERR_OK)
- return err;
-
- /* Save station address */
- LPC_EMAC->SA2 = (u32_t) netif->hwaddr[0] |
- (((u32_t) netif->hwaddr[1]) << 8);
- LPC_EMAC->SA1 = (u32_t) netif->hwaddr[2] |
- (((u32_t) netif->hwaddr[3]) << 8);
- LPC_EMAC->SA0 = (u32_t) netif->hwaddr[4] |
- (((u32_t) netif->hwaddr[5]) << 8);
-
- /* Setup transmit and receive descriptors */
- if (lpc_tx_setup(lpc_enetif) != ERR_OK)
- return ERR_BUF;
- if (lpc_rx_setup(lpc_enetif) != ERR_OK)
- return ERR_BUF;
-
- /* Enable packet reception */
-#if IP_SOF_BROADCAST_RECV
- LPC_EMAC->RxFilterCtrl = EMAC_RFC_PERFECT_EN | EMAC_RFC_BCAST_EN;
-#else
- LPC_EMAC->RxFilterCtrl = EMAC_RFC_PERFECT_EN;
-#endif
-
- /* Clear and enable rx/tx interrupts */
- LPC_EMAC->IntClear = 0xFFFF;
- LPC_EMAC->IntEnable = RXINTGROUP | TXINTGROUP;
-
- /* Enable RX and TX */
- LPC_EMAC->Command |= EMAC_CR_RX_EN | EMAC_CR_TX_EN;
- LPC_EMAC->MAC1 |= EMAC_MAC1_REC_EN;
-
- return err;
-}
-
-/* This function provides a method for the PHY to setup the EMAC
- for the PHY negotiated duplex mode */
-void lpc_emac_set_duplex(int full_duplex)
-{
- if (full_duplex) {
- LPC_EMAC->MAC2 |= EMAC_MAC2_FULL_DUP;
- LPC_EMAC->Command |= EMAC_CR_FULL_DUP;
- LPC_EMAC->IPGT = EMAC_IPGT_FULL_DUP;
- } else {
- LPC_EMAC->MAC2 &= ~EMAC_MAC2_FULL_DUP;
- LPC_EMAC->Command &= ~EMAC_CR_FULL_DUP;
- LPC_EMAC->IPGT = EMAC_IPGT_HALF_DUP;
- }
-}
-
-/* This function provides a method for the PHY to setup the EMAC
- for the PHY negotiated bit rate */
-void lpc_emac_set_speed(int mbs_100)
-{
- if (mbs_100)
- LPC_EMAC->SUPP = EMAC_SUPP_SPEED;
- else
- LPC_EMAC->SUPP = 0;
-}
-
-/**
- * This function is the ethernet packet send function. It calls
- * etharp_output after checking link status.
- *
- * \param[in] netif the lwip network interface structure for this lpc_enetif
- * \param[in] q Pointer to pbug to send
- * \param[in] ipaddr IP address
- * \return ERR_OK or error code
- */
-err_t lpc_etharp_output(struct netif *netif, struct pbuf *q,
- ip_addr_t *ipaddr)
-{
- /* Only send packet is link is up */
- if (netif->flags & NETIF_FLAG_LINK_UP)
- return etharp_output(netif, q, ipaddr);
-
- return ERR_CONN;
-}
-
-#if NO_SYS == 0
-/* periodic PHY status update */
-void phy_update(void const *nif) {
- lpc_phy_sts_sm((struct netif*)nif);
-}
-osTimerDef(phy_update, phy_update);
-#endif
-
-/**
- * Should be called at the beginning of the program to set up the
- * network interface.
- *
- * This function should be passed as a parameter to netif_add().
- *
- * @param[in] netif the lwip network interface structure for this lpc_enetif
- * @return ERR_OK if the loopif is initialized
- * ERR_MEM if private data couldn't be allocated
- * any other err_t on error
- */
-err_t lpc_enetif_init(struct netif *netif)
-{
- err_t err;
-
- LWIP_ASSERT("netif != NULL", (netif != NULL));
-
- lpc_enetdata.netif = netif;
-
- /* set MAC hardware address */
- mbed_mac_address((char *)netif->hwaddr);
- netif->hwaddr_len = ETHARP_HWADDR_LEN;
-
- /* maximum transfer unit */
- netif->mtu = 1500;
-
- /* device capabilities */
- netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_ETHERNET;
-
- /* Initialize the hardware */
- netif->state = &lpc_enetdata;
- err = low_level_init(netif);
- if (err != ERR_OK)
- return err;
-
-#if LWIP_NETIF_HOSTNAME
- /* Initialize interface hostname */
- netif->hostname = "lwiplpc";
-#endif /* LWIP_NETIF_HOSTNAME */
-
- netif->name[0] = 'e';
- netif->name[1] = 'n';
-
- netif->output = lpc_etharp_output;
- netif->linkoutput = lpc_low_level_output;
-
- /* CMSIS-RTOS, start tasks */
-#if NO_SYS == 0
- #ifdef CMSIS_OS_RTX
- memset(lpc_enetdata.xTXDCountSem.data, 0, sizeof(lpc_enetdata.xTXDCountSem.data));
- lpc_enetdata.xTXDCountSem.def.semaphore = lpc_enetdata.xTXDCountSem.data;
- #endif
- lpc_enetdata.xTXDCountSem.id = osSemaphoreCreate(&lpc_enetdata.xTXDCountSem.def, LPC_NUM_BUFF_TXDESCS);
- LWIP_ASSERT("xTXDCountSem creation error", (lpc_enetdata.xTXDCountSem.id != NULL));
-
- err = sys_mutex_new(&lpc_enetdata.TXLockMutex);
- LWIP_ASSERT("TXLockMutex creation error", (err == ERR_OK));
-
- /* Packet receive task */
- err = sys_sem_new(&lpc_enetdata.RxSem, 0);
- LWIP_ASSERT("RxSem creation error", (err == ERR_OK));
- sys_thread_new("receive_thread", packet_rx, netif->state, DEFAULT_THREAD_STACKSIZE, RX_PRIORITY);
-
- /* Transmit cleanup task */
- err = sys_sem_new(&lpc_enetdata.TxCleanSem, 0);
- LWIP_ASSERT("TxCleanSem creation error", (err == ERR_OK));
- sys_thread_new("txclean_thread", packet_tx, netif->state, DEFAULT_THREAD_STACKSIZE, TX_PRIORITY);
-
- /* periodic PHY status update */
- osTimerId phy_timer = osTimerCreate(osTimer(phy_update), osTimerPeriodic, (void *)netif);
- osTimerStart(phy_timer, 250);
-#endif
-
- return ERR_OK;
-}
-
-/**
- * @}
- */
-
-/* --------------------------------- End Of File ------------------------------ */
+/**********************************************************************
+* $Id$ lpc17_emac.c 2011-11-20
+*//**
+* @file lpc17_emac.c
+* @brief LPC17 ethernet driver for LWIP
+* @version 1.0
+* @date 20. Nov. 2011
+* @author NXP MCU SW Application Team
+*
+* Copyright(C) 2011, NXP Semiconductor
+* All rights reserved.
+*
+***********************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+**********************************************************************/
+
+#include "lwip/opt.h"
+#include "lwip/sys.h"
+#include "lwip/def.h"
+#include "lwip/mem.h"
+#include "lwip/pbuf.h"
+#include "lwip/stats.h"
+#include "lwip/snmp.h"
+#include "netif/etharp.h"
+#include "netif/ppp_oe.h"
+
+#include "lpc17xx_emac.h"
+#include "lpc17_emac.h"
+#include "lpc_emac_config.h"
+#include "lpc_phy.h"
+#include "sys_arch.h"
+
+#include "mbed_interface.h"
+#include <string.h>
+
+#ifndef LPC_EMAC_RMII
+#error LPC_EMAC_RMII is not defined!
+#endif
+
+#if LPC_NUM_BUFF_TXDESCS < 2
+#error LPC_NUM_BUFF_TXDESCS must be at least 2
+#endif
+
+#if LPC_NUM_BUFF_RXDESCS < 3
+#error LPC_NUM_BUFF_RXDESCS must be at least 3
+#endif
+
+/** @defgroup lwip17xx_emac_DRIVER lpc17 EMAC driver for LWIP
+ * @ingroup lwip_emac
+ *
+ * @{
+ */
+
+#if NO_SYS == 0
+/** \brief Driver transmit and receive thread priorities
+ *
+ * Thread priorities for receive thread and TX cleanup thread. Alter
+ * to prioritize receive or transmit bandwidth. In a heavily loaded
+ * system or with LEIP_DEBUG enabled, the priorities might be better
+ * the same. */
+#define RX_PRIORITY (osPriorityNormal)
+#define TX_PRIORITY (osPriorityNormal)
+
+/** \brief Debug output formatter lock define
+ *
+ * When using FreeRTOS and with LWIP_DEBUG enabled, enabling this
+ * define will allow RX debug messages to not interleave with the
+ * TX messages (so they are actually readable). Not enabling this
+ * define when the system is under load will cause the output to
+ * be unreadable. There is a small tradeoff in performance for this
+ * so use it only for debug. */
+//#define LOCK_RX_THREAD
+
+/** \brief Receive group interrupts
+ */
+#define RXINTGROUP (EMAC_INT_RX_OVERRUN | EMAC_INT_RX_ERR | EMAC_INT_RX_DONE)
+
+/** \brief Transmit group interrupts
+ */
+#define TXINTGROUP (EMAC_INT_TX_UNDERRUN | EMAC_INT_TX_ERR | EMAC_INT_TX_DONE)
+
+#else
+#define RXINTGROUP 0
+#define TXINTGROUP 0
+#endif
+
+ /** \brief Structure of a TX/RX descriptor
+ */
+typedef struct
+{
+ volatile u32_t packet; /**< Pointer to buffer */
+ volatile u32_t control; /**< Control word */
+} LPC_TXRX_DESC_T;
+
+/** \brief Structure of a RX status entry
+ */
+typedef struct
+{
+ volatile u32_t statusinfo; /**< RX status word */
+ volatile u32_t statushashcrc; /**< RX hash CRC */
+} LPC_TXRX_STATUS_T;
+
+/* LPC EMAC driver data structure */
+struct lpc_enetdata {
+ /* prxs must be 8 byte aligned! */
+ LPC_TXRX_STATUS_T prxs[LPC_NUM_BUFF_RXDESCS]; /**< Pointer to RX statuses */
+ struct netif *netif; /**< Reference back to LWIP parent netif */
+ LPC_TXRX_DESC_T ptxd[LPC_NUM_BUFF_TXDESCS]; /**< Pointer to TX descriptor list */
+ LPC_TXRX_STATUS_T ptxs[LPC_NUM_BUFF_TXDESCS]; /**< Pointer to TX statuses */
+ LPC_TXRX_DESC_T prxd[LPC_NUM_BUFF_RXDESCS]; /**< Pointer to RX descriptor list */
+ struct pbuf *rxb[LPC_NUM_BUFF_RXDESCS]; /**< RX pbuf pointer list, zero-copy mode */
+ u32_t rx_fill_desc_index; /**< RX descriptor next available index */
+ volatile u32_t rx_free_descs; /**< Count of free RX descriptors */
+ struct pbuf *txb[LPC_NUM_BUFF_TXDESCS]; /**< TX pbuf pointer list, zero-copy mode */
+ u32_t lpc_last_tx_idx; /**< TX last descriptor index, zero-copy mode */
+#if NO_SYS == 0
+ sys_sem_t RxSem; /**< RX receive thread wakeup semaphore */
+ sys_sem_t TxCleanSem; /**< TX cleanup thread wakeup semaphore */
+ sys_mutex_t TXLockMutex; /**< TX critical section mutex */
+ sys_sem_t xTXDCountSem; /**< TX free buffer counting semaphore */
+#endif
+};
+
+/** \brief LPC EMAC driver work data
+ */
+ALIGNED(8) struct lpc_enetdata lpc_enetdata;
+
+/* Write a value via the MII link (non-blocking) */
+void lpc_mii_write_noblock(u32_t PhyReg, u32_t Value)
+{
+ /* Write value at PHY address and register */
+ LPC_EMAC->MADR = (LPC_PHYDEF_PHYADDR << 8) | PhyReg;
+ LPC_EMAC->MWTD = Value;
+}
+
+/* Write a value via the MII link (blocking) */
+err_t lpc_mii_write(u32_t PhyReg, u32_t Value)
+{
+ u32_t mst = 250;
+ err_t sts = ERR_OK;
+
+ /* Write value at PHY address and register */
+ lpc_mii_write_noblock(PhyReg, Value);
+
+ /* Wait for unbusy status */
+ while (mst > 0) {
+ sts = LPC_EMAC->MIND;
+ if ((sts & EMAC_MIND_BUSY) == 0)
+ mst = 0;
+ else {
+ mst--;
+ osDelay(1);
+ }
+ }
+
+ if (sts != 0)
+ sts = ERR_TIMEOUT;
+
+ return sts;
+}
+
+/* Reads current MII link busy status */
+u32_t lpc_mii_is_busy(void)
+{
+ return (u32_t) (LPC_EMAC->MIND & EMAC_MIND_BUSY);
+}
+
+/* Starts a read operation via the MII link (non-blocking) */
+u32_t lpc_mii_read_data(void)
+{
+ u32_t data = LPC_EMAC->MRDD;
+ LPC_EMAC->MCMD = 0;
+
+ return data;
+}
+
+/* Starts a read operation via the MII link (non-blocking) */
+void lpc_mii_read_noblock(u32_t PhyReg)
+{
+ /* Read value at PHY address and register */
+ LPC_EMAC->MADR = (LPC_PHYDEF_PHYADDR << 8) | PhyReg;
+ LPC_EMAC->MCMD = EMAC_MCMD_READ;
+}
+
+/* Read a value via the MII link (blocking) */
+err_t lpc_mii_read(u32_t PhyReg, u32_t *data)
+{
+ u32_t mst = 250;
+ err_t sts = ERR_OK;
+
+ /* Read value at PHY address and register */
+ lpc_mii_read_noblock(PhyReg);
+
+ /* Wait for unbusy status */
+ while (mst > 0) {
+ sts = LPC_EMAC->MIND & ~EMAC_MIND_MII_LINK_FAIL;
+ if ((sts & EMAC_MIND_BUSY) == 0) {
+ mst = 0;
+ *data = LPC_EMAC->MRDD;
+ } else {
+ mst--;
+ osDelay(1);
+ }
+ }
+
+ LPC_EMAC->MCMD = 0;
+
+ if (sts != 0)
+ sts = ERR_TIMEOUT;
+
+ return sts;
+}
+
+/** \brief Queues a pbuf into the RX descriptor list
+ *
+ * \param[in] lpc_enetif Pointer to the drvier data structure
+ * \param[in] p Pointer to pbuf to queue
+ */
+static void lpc_rxqueue_pbuf(struct lpc_enetdata *lpc_enetif, struct pbuf *p)
+{
+ u32_t idx;
+
+ /* Get next free descriptor index */
+ idx = lpc_enetif->rx_fill_desc_index;
+
+ /* Setup descriptor and clear statuses */
+ lpc_enetif->prxd[idx].control = EMAC_RCTRL_INT | ((u32_t) (p->len - 1));
+ lpc_enetif->prxd[idx].packet = (u32_t) p->payload;
+ lpc_enetif->prxs[idx].statusinfo = 0xFFFFFFFF;
+ lpc_enetif->prxs[idx].statushashcrc = 0xFFFFFFFF;
+
+ /* Save pbuf pointer for push to network layer later */
+ lpc_enetif->rxb[idx] = p;
+
+ /* Wrap at end of descriptor list */
+ idx++;
+ if (idx >= LPC_NUM_BUFF_RXDESCS)
+ idx = 0;
+
+ /* Queue descriptor(s) */
+ lpc_enetif->rx_free_descs -= 1;
+ lpc_enetif->rx_fill_desc_index = idx;
+ LPC_EMAC->RxConsumeIndex = idx;
+
+ LWIP_DEBUGF(UDP_LPC_EMAC | LWIP_DBG_TRACE,
+ ("lpc_rxqueue_pbuf: pbuf packet queued: %p (free desc=%d)\n", p,
+ lpc_enetif->rx_free_descs));
+}
+
+/** \brief Attempt to allocate and requeue a new pbuf for RX
+ *
+ * \param[in] netif Pointer to the netif structure
+ * \returns 1 if a packet was allocated and requeued, otherwise 0
+ */
+s32_t lpc_rx_queue(struct netif *netif)
+{
+ struct lpc_enetdata *lpc_enetif = netif->state;
+ struct pbuf *p;
+ s32_t queued = 0;
+
+ /* Attempt to requeue as many packets as possible */
+ while (lpc_enetif->rx_free_descs > 0) {
+ /* Allocate a pbuf from the pool. We need to allocate at the
+ maximum size as we don't know the size of the yet to be
+ received packet. */
+ p = pbuf_alloc(PBUF_RAW, (u16_t) EMAC_ETH_MAX_FLEN, PBUF_RAM);
+ if (p == NULL) {
+ LWIP_DEBUGF(UDP_LPC_EMAC | LWIP_DBG_TRACE,
+ ("lpc_rx_queue: could not allocate RX pbuf (free desc=%d)\n",
+ lpc_enetif->rx_free_descs));
+ return queued;
+ }
+
+ /* pbufs allocated from the RAM pool should be non-chained. */
+ LWIP_ASSERT("lpc_rx_queue: pbuf is not contiguous (chained)",
+ pbuf_clen(p) <= 1);
+
+ /* Queue packet */
+ lpc_rxqueue_pbuf(lpc_enetif, p);
+
+ /* Update queued count */
+ queued++;
+ }
+
+ return queued;
+}
+
+/** \brief Sets up the RX descriptor ring buffers.
+ *
+ * This function sets up the descriptor list used for receive packets.
+ *
+ * \param[in] lpc_enetif Pointer to driver data structure
+ * \returns Always returns ERR_OK
+ */
+static err_t lpc_rx_setup(struct lpc_enetdata *lpc_enetif)
+{
+ /* Setup pointers to RX structures */
+ LPC_EMAC->RxDescriptor = (u32_t) &lpc_enetif->prxd[0];
+ LPC_EMAC->RxStatus = (u32_t) &lpc_enetif->prxs[0];
+ LPC_EMAC->RxDescriptorNumber = LPC_NUM_BUFF_RXDESCS - 1;
+
+ lpc_enetif->rx_free_descs = LPC_NUM_BUFF_RXDESCS;
+ lpc_enetif->rx_fill_desc_index = 0;
+
+ /* Build RX buffer and descriptors */
+ lpc_rx_queue(lpc_enetif->netif);
+
+ return ERR_OK;
+}
+
+/** \brief Allocates a pbuf and returns the data from the incoming packet.
+ *
+ * \param[in] netif the lwip network interface structure for this lpc_enetif
+ * \return a pbuf filled with the received packet (including MAC header)
+ * NULL on memory error
+ */
+static struct pbuf *lpc_low_level_input(struct netif *netif)
+{
+ struct lpc_enetdata *lpc_enetif = netif->state;
+ struct pbuf *p = NULL;
+ u32_t idx, length;
+
+#ifdef LOCK_RX_THREAD
+#if NO_SYS == 0
+ /* Get exclusive access */
+ sys_mutex_lock(&lpc_enetif->TXLockMutex);
+#endif
+#endif
+
+ /* Monitor RX overrun status. This should never happen unless
+ (possibly) the internal bus is behing held up by something.
+ Unless your system is running at a very low clock speed or
+ there are possibilities that the internal buses may be held
+ up for a long time, this can probably safely be removed. */
+ if (LPC_EMAC->IntStatus & EMAC_INT_RX_OVERRUN) {
+ LINK_STATS_INC(link.err);
+ LINK_STATS_INC(link.drop);
+
+ /* Temporarily disable RX */
+ LPC_EMAC->MAC1 &= ~EMAC_MAC1_REC_EN;
+
+ /* Reset the RX side */
+ LPC_EMAC->MAC1 |= EMAC_MAC1_RES_RX;
+ LPC_EMAC->IntClear = EMAC_INT_RX_OVERRUN;
+
+ /* De-allocate all queued RX pbufs */
+ for (idx = 0; idx < LPC_NUM_BUFF_RXDESCS; idx++) {
+ if (lpc_enetif->rxb[idx] != NULL) {
+ pbuf_free(lpc_enetif->rxb[idx]);
+ lpc_enetif->rxb[idx] = NULL;
+ }
+ }
+
+ /* Start RX side again */
+ lpc_rx_setup(lpc_enetif);
+
+ /* Re-enable RX */
+ LPC_EMAC->MAC1 |= EMAC_MAC1_REC_EN;
+
+#ifdef LOCK_RX_THREAD
+#if NO_SYS == 0
+ sys_mutex_unlock(&lpc_enetif->TXLockMutex);
+#endif
+#endif
+
+ return NULL;
+ }
+
+ /* Determine if a frame has been received */
+ length = 0;
+ idx = LPC_EMAC->RxConsumeIndex;
+ if (LPC_EMAC->RxProduceIndex != idx) {
+ /* Handle errors */
+ if (lpc_enetif->prxs[idx].statusinfo & (EMAC_RINFO_CRC_ERR |
+ EMAC_RINFO_SYM_ERR | EMAC_RINFO_ALIGN_ERR | EMAC_RINFO_LEN_ERR)) {
+#if LINK_STATS
+ if (lpc_enetif->prxs[idx].statusinfo & (EMAC_RINFO_CRC_ERR |
+ EMAC_RINFO_SYM_ERR | EMAC_RINFO_ALIGN_ERR))
+ LINK_STATS_INC(link.chkerr);
+ if (lpc_enetif->prxs[idx].statusinfo & EMAC_RINFO_LEN_ERR)
+ LINK_STATS_INC(link.lenerr);
+#endif
+
+ /* Drop the frame */
+ LINK_STATS_INC(link.drop);
+
+ /* Re-queue the pbuf for receive */
+ lpc_enetif->rx_free_descs++;
+ p = lpc_enetif->rxb[idx];
+ lpc_enetif->rxb[idx] = NULL;
+ lpc_rxqueue_pbuf(lpc_enetif, p);
+
+ LWIP_DEBUGF(UDP_LPC_EMAC | LWIP_DBG_TRACE,
+ ("lpc_low_level_input: Packet dropped with errors (0x%x)\n",
+ lpc_enetif->prxs[idx].statusinfo));
+ } else {
+ /* A packet is waiting, get length */
+ length = (lpc_enetif->prxs[idx].statusinfo & 0x7FF) + 1;
+
+ /* Zero-copy */
+ p = lpc_enetif->rxb[idx];
+ p->len = (u16_t) length;
+
+ /* Free pbuf from desriptor */
+ lpc_enetif->rxb[idx] = NULL;
+ lpc_enetif->rx_free_descs++;
+
+ LWIP_DEBUGF(UDP_LPC_EMAC | LWIP_DBG_TRACE,
+ ("lpc_low_level_input: Packet received: %p, size %d (index=%d)\n",
+ p, length, idx));
+
+ /* Save size */
+ p->tot_len = (u16_t) length;
+ LINK_STATS_INC(link.recv);
+
+ /* Queue new buffer(s) */
+ lpc_rx_queue(lpc_enetif->netif);
+ }
+ }
+
+#ifdef LOCK_RX_THREAD
+#if NO_SYS == 0
+ sys_mutex_unlock(&lpc_enetif->TXLockMutex);
+#endif
+#endif
+
+ return p;
+}
+
+/** \brief Attempt to read a packet from the EMAC interface.
+ *
+ * \param[in] netif the lwip network interface structure for this lpc_enetif
+ */
+void lpc_enetif_input(struct netif *netif)
+{
+ struct eth_hdr *ethhdr;
+ struct pbuf *p;
+
+ /* move received packet into a new pbuf */
+ p = lpc_low_level_input(netif);
+ if (p == NULL)
+ return;
+
+ /* points to packet payload, which starts with an Ethernet header */
+ ethhdr = p->payload;
+
+ switch (htons(ethhdr->type)) {
+ case ETHTYPE_IP:
+ case ETHTYPE_ARP:
+#if PPPOE_SUPPORT
+ case ETHTYPE_PPPOEDISC:
+ case ETHTYPE_PPPOE:
+#endif /* PPPOE_SUPPORT */
+ /* full packet send to tcpip_thread to process */
+ if (netif->input(p, netif) != ERR_OK) {
+ LWIP_DEBUGF(NETIF_DEBUG, ("lpc_enetif_input: IP input error\n"));
+ /* Free buffer */
+ pbuf_free(p);
+ }
+ break;
+
+ default:
+ /* Return buffer */
+ pbuf_free(p);
+ break;
+ }
+}
+
+/** \brief Determine if the passed address is usable for the ethernet
+ * DMA controller.
+ *
+ * \param[in] addr Address of packet to check for DMA safe operation
+ * \return 1 if the packet address is not safe, otherwise 0
+ */
+static s32_t lpc_packet_addr_notsafe(void *addr) {
+ /* Check for legal address ranges */
+ if ((((u32_t) addr >= 0x2007C000) && ((u32_t) addr < 0x20083FFF))) {
+ return 0;
+ }
+ return 1;
+}
+
+/** \brief Sets up the TX descriptor ring buffers.
+ *
+ * This function sets up the descriptor list used for transmit packets.
+ *
+ * \param[in] lpc_enetif Pointer to driver data structure
+ */
+static err_t lpc_tx_setup(struct lpc_enetdata *lpc_enetif)
+{
+ s32_t idx;
+
+ /* Build TX descriptors for local buffers */
+ for (idx = 0; idx < LPC_NUM_BUFF_TXDESCS; idx++) {
+ lpc_enetif->ptxd[idx].control = 0;
+ lpc_enetif->ptxs[idx].statusinfo = 0xFFFFFFFF;
+ }
+
+ /* Setup pointers to TX structures */
+ LPC_EMAC->TxDescriptor = (u32_t) &lpc_enetif->ptxd[0];
+ LPC_EMAC->TxStatus = (u32_t) &lpc_enetif->ptxs[0];
+ LPC_EMAC->TxDescriptorNumber = LPC_NUM_BUFF_TXDESCS - 1;
+
+ lpc_enetif->lpc_last_tx_idx = 0;
+
+ return ERR_OK;
+}
+
+/** \brief Free TX buffers that are complete
+ *
+ * \param[in] lpc_enetif Pointer to driver data structure
+ * \param[in] cidx EMAC current descriptor comsumer index
+ */
+static void lpc_tx_reclaim_st(struct lpc_enetdata *lpc_enetif, u32_t cidx)
+{
+#if NO_SYS == 0
+ /* Get exclusive access */
+ sys_mutex_lock(&lpc_enetif->TXLockMutex);
+#endif
+
+ while (cidx != lpc_enetif->lpc_last_tx_idx) {
+ if (lpc_enetif->txb[lpc_enetif->lpc_last_tx_idx] != NULL) {
+ LWIP_DEBUGF(UDP_LPC_EMAC | LWIP_DBG_TRACE,
+ ("lpc_tx_reclaim_st: Freeing packet %p (index %d)\n",
+ lpc_enetif->txb[lpc_enetif->lpc_last_tx_idx],
+ lpc_enetif->lpc_last_tx_idx));
+ pbuf_free(lpc_enetif->txb[lpc_enetif->lpc_last_tx_idx]);
+ lpc_enetif->txb[lpc_enetif->lpc_last_tx_idx] = NULL;
+ }
+
+#if NO_SYS == 0
+ osSemaphoreRelease(lpc_enetif->xTXDCountSem.id);
+#endif
+ lpc_enetif->lpc_last_tx_idx++;
+ if (lpc_enetif->lpc_last_tx_idx >= LPC_NUM_BUFF_TXDESCS)
+ lpc_enetif->lpc_last_tx_idx = 0;
+ }
+
+#if NO_SYS == 0
+ /* Restore access */
+ sys_mutex_unlock(&lpc_enetif->TXLockMutex);
+#endif
+}
+
+/** \brief User call for freeingTX buffers that are complete
+ *
+ * \param[in] netif the lwip network interface structure for this lpc_enetif
+ */
+void lpc_tx_reclaim(struct netif *netif)
+{
+ lpc_tx_reclaim_st((struct lpc_enetdata *) netif->state,
+ LPC_EMAC->TxConsumeIndex);
+}
+
+ /** \brief Polls if an available TX descriptor is ready. Can be used to
+ * determine if the low level transmit function will block.
+ *
+ * \param[in] netif the lwip network interface structure for this lpc_enetif
+ * \return 0 if no descriptors are read, or >0
+ */
+s32_t lpc_tx_ready(struct netif *netif)
+{
+ s32_t fb;
+ u32_t idx, cidx;
+
+ cidx = LPC_EMAC->TxConsumeIndex;
+ idx = LPC_EMAC->TxProduceIndex;
+
+ /* Determine number of free buffers */
+ if (idx == cidx)
+ fb = LPC_NUM_BUFF_TXDESCS;
+ else if (cidx > idx)
+ fb = (LPC_NUM_BUFF_TXDESCS - 1) -
+ ((idx + LPC_NUM_BUFF_TXDESCS) - cidx);
+ else
+ fb = (LPC_NUM_BUFF_TXDESCS - 1) - (cidx - idx);
+
+ return fb;
+}
+
+/** \brief Low level output of a packet. Never call this from an
+ * interrupt context, as it may block until TX descriptors
+ * become available.
+ *
+ * \param[in] netif the lwip network interface structure for this lpc_enetif
+ * \param[in] p the MAC packet to send (e.g. IP packet including MAC addresses and type)
+ * \return ERR_OK if the packet could be sent or an err_t value if the packet couldn't be sent
+ */
+static err_t lpc_low_level_output(struct netif *netif, struct pbuf *p)
+{
+ struct lpc_enetdata *lpc_enetif = netif->state;
+ struct pbuf *q;
+ u8_t *dst;
+ u32_t idx;
+ struct pbuf *np;
+ u32_t dn, notdmasafe = 0;
+
+ /* Zero-copy TX buffers may be fragmented across mutliple payload
+ chains. Determine the number of descriptors needed for the
+ transfer. The pbuf chaining can be a mess! */
+ dn = (u32_t) pbuf_clen(p);
+
+ /* Test to make sure packet addresses are DMA safe. A DMA safe
+ address is once that uses external memory or periphheral RAM.
+ IRAM and FLASH are not safe! */
+ for (q = p; q != NULL; q = q->next)
+ notdmasafe += lpc_packet_addr_notsafe(q->payload);
+
+#if LPC_TX_PBUF_BOUNCE_EN==1
+ /* If the pbuf is not DMA safe, a new bounce buffer (pbuf) will be
+ created that will be used instead. This requires an copy from the
+ non-safe DMA region to the new pbuf */
+ if (notdmasafe) {
+ /* Allocate a pbuf in DMA memory */
+ np = pbuf_alloc(PBUF_RAW, p->tot_len, PBUF_RAM);
+ if (np == NULL)
+ return ERR_MEM;
+
+ /* This buffer better be contiguous! */
+ LWIP_ASSERT("lpc_low_level_output: New transmit pbuf is chained",
+ (pbuf_clen(np) == 1));
+
+ /* Copy to DMA safe pbuf */
+ dst = (u8_t *) np->payload;
+ for(q = p; q != NULL; q = q->next) {
+ /* Copy the buffer to the descriptor's buffer */
+ MEMCPY(dst, (u8_t *) q->payload, q->len);
+ dst += q->len;
+ }
+ np->len = p->tot_len;
+
+ LWIP_DEBUGF(UDP_LPC_EMAC | LWIP_DBG_TRACE,
+ ("lpc_low_level_output: Switched to DMA safe buffer, old=%p, new=%p\n",
+ q, np));
+
+ /* use the new buffer for descrptor queueing. The original pbuf will
+ be de-allocated outsuide this driver. */
+ p = np;
+ dn = 1;
+ }
+#else
+ if (notdmasafe)
+ LWIP_ASSERT("lpc_low_level_output: Not a DMA safe pbuf",
+ (notdmasafe == 0));
+#endif
+
+ /* Wait until enough descriptors are available for the transfer. */
+ /* THIS WILL BLOCK UNTIL THERE ARE ENOUGH DESCRIPTORS AVAILABLE */
+ while (dn > lpc_tx_ready(netif))
+#if NO_SYS == 0
+ osSemaphoreWait(lpc_enetif->xTXDCountSem.id, osWaitForever);
+#else
+ osDelay(1);
+#endif
+
+ /* Get free TX buffer index */
+ idx = LPC_EMAC->TxProduceIndex;
+
+#if NO_SYS == 0
+ /* Get exclusive access */
+ sys_mutex_lock(&lpc_enetif->TXLockMutex);
+#endif
+
+ /* Prevent LWIP from de-allocating this pbuf. The driver will
+ free it once it's been transmitted. */
+ if (!notdmasafe)
+ pbuf_ref(p);
+
+ /* Setup transfers */
+ q = p;
+ while (dn > 0) {
+ dn--;
+
+ /* Only save pointer to free on last descriptor */
+ if (dn == 0) {
+ /* Save size of packet and signal it's ready */
+ lpc_enetif->ptxd[idx].control = (q->len - 1) | EMAC_TCTRL_INT |
+ EMAC_TCTRL_LAST;
+ lpc_enetif->txb[idx] = p;
+ }
+ else {
+ /* Save size of packet, descriptor is not last */
+ lpc_enetif->ptxd[idx].control = (q->len - 1) | EMAC_TCTRL_INT;
+ lpc_enetif->txb[idx] = NULL;
+ }
+
+ LWIP_DEBUGF(UDP_LPC_EMAC | LWIP_DBG_TRACE,
+ ("lpc_low_level_output: pbuf packet(%p) sent, chain#=%d,"
+ " size = %d (index=%d)\n", q->payload, dn, q->len, idx));
+
+ lpc_enetif->ptxd[idx].packet = (u32_t) q->payload;
+
+ q = q->next;
+
+ idx++;
+ if (idx >= LPC_NUM_BUFF_TXDESCS)
+ idx = 0;
+ }
+
+ LPC_EMAC->TxProduceIndex = idx;
+
+ LINK_STATS_INC(link.xmit);
+
+#if NO_SYS == 0
+ /* Restore access */
+ sys_mutex_unlock(&lpc_enetif->TXLockMutex);
+#endif
+
+ return ERR_OK;
+}
+
+/** \brief LPC EMAC interrupt handler.
+ *
+ * This function handles the transmit, receive, and error interrupt of
+ * the LPC177x_8x. This is meant to be used when NO_SYS=0.
+ */
+void ENET_IRQHandler(void)
+{
+#if NO_SYS == 1
+ /* Interrupts are not used without an RTOS */
+ NVIC_DisableIRQ(ENET_IRQn);
+#else
+ uint32_t ints;
+
+ /* Interrupts are of 2 groups - transmit or receive. Based on the
+ interrupt, kick off the receive or transmit (cleanup) task */
+
+ /* Get pending interrupts */
+ ints = LPC_EMAC->IntStatus;
+
+ if (ints & RXINTGROUP) {
+ /* RX group interrupt(s): Give semaphore to wakeup RX receive task.*/
+ sys_sem_signal(&lpc_enetdata.RxSem);
+ }
+
+ if (ints & TXINTGROUP) {
+ /* TX group interrupt(s): Give semaphore to wakeup TX cleanup task. */
+ sys_sem_signal(&lpc_enetdata.TxCleanSem);
+ }
+
+ /* Clear pending interrupts */
+ LPC_EMAC->IntClear = ints;
+#endif
+}
+
+#if NO_SYS == 0
+/** \brief Packet reception task
+ *
+ * This task is called when a packet is received. It will
+ * pass the packet to the LWIP core.
+ *
+ * \param[in] pvParameters Not used yet
+ */
+static void packet_rx(void* pvParameters) {
+ struct lpc_enetdata *lpc_enetif = pvParameters;
+
+ while (1) {
+ /* Wait for receive task to wakeup */
+ sys_arch_sem_wait(&lpc_enetif->RxSem, 0);
+
+ /* Process packets until all empty */
+ while (LPC_EMAC->RxConsumeIndex != LPC_EMAC->RxProduceIndex)
+ lpc_enetif_input(lpc_enetif->netif);
+ }
+}
+
+/** \brief Transmit cleanup task
+ *
+ * This task is called when a transmit interrupt occurs and
+ * reclaims the pbuf and descriptor used for the packet once
+ * the packet has been transferred.
+ *
+ * \param[in] pvParameters Not used yet
+ */
+static void packet_tx(void* pvParameters) {
+ struct lpc_enetdata *lpc_enetif = pvParameters;
+ s32_t idx;
+
+ while (1) {
+ /* Wait for transmit cleanup task to wakeup */
+ sys_arch_sem_wait(&lpc_enetif->TxCleanSem, 0);
+
+ /* Error handling for TX underruns. This should never happen unless
+ something is holding the bus or the clocks are going too slow. It
+ can probably be safely removed. */
+ if (LPC_EMAC->IntStatus & EMAC_INT_TX_UNDERRUN) {
+ LINK_STATS_INC(link.err);
+ LINK_STATS_INC(link.drop);
+
+#if NO_SYS == 0
+ /* Get exclusive access */
+ sys_mutex_lock(&lpc_enetif->TXLockMutex);
+#endif
+ /* Reset the TX side */
+ LPC_EMAC->MAC1 |= EMAC_MAC1_RES_TX;
+ LPC_EMAC->IntClear = EMAC_INT_TX_UNDERRUN;
+
+ /* De-allocate all queued TX pbufs */
+ for (idx = 0; idx < LPC_NUM_BUFF_RXDESCS; idx++) {
+ if (lpc_enetif->txb[idx] != NULL) {
+ pbuf_free(lpc_enetif->txb[idx]);
+ lpc_enetif->txb[idx] = NULL;
+ }
+ }
+
+#if NO_SYS == 0
+ /* Restore access */
+ sys_mutex_unlock(&lpc_enetif->TXLockMutex);
+#endif
+ /* Start TX side again */
+ lpc_tx_setup(lpc_enetif);
+ } else {
+ /* Free TX buffers that are done sending */
+ lpc_tx_reclaim(lpc_enetdata.netif);
+ }
+ }
+}
+#endif
+
+/** \brief Low level init of the MAC and PHY.
+ *
+ * \param[in] netif Pointer to LWIP netif structure
+ */
+static err_t low_level_init(struct netif *netif)
+{
+ struct lpc_enetdata *lpc_enetif = netif->state;
+ err_t err = ERR_OK;
+
+ /* Enable MII clocking */
+ LPC_SC->PCONP |= CLKPWR_PCONP_PCENET;
+
+ LPC_PINCON->PINSEL2 = 0x50150105; /* Enable P1 Ethernet Pins. */
+ LPC_PINCON->PINSEL3 = (LPC_PINCON->PINSEL3 & ~0x0000000F) | 0x00000005;
+
+ /* Reset all MAC logic */
+ LPC_EMAC->MAC1 = EMAC_MAC1_RES_TX | EMAC_MAC1_RES_MCS_TX |
+ EMAC_MAC1_RES_RX | EMAC_MAC1_RES_MCS_RX | EMAC_MAC1_SIM_RES |
+ EMAC_MAC1_SOFT_RES;
+ LPC_EMAC->Command = EMAC_CR_REG_RES | EMAC_CR_TX_RES | EMAC_CR_RX_RES |
+ EMAC_CR_PASS_RUNT_FRM;
+ osDelay(10);
+
+ /* Initial MAC initialization */
+ LPC_EMAC->MAC1 = EMAC_MAC1_PASS_ALL;
+ LPC_EMAC->MAC2 = EMAC_MAC2_CRC_EN | EMAC_MAC2_PAD_EN |
+ EMAC_MAC2_VLAN_PAD_EN;
+ LPC_EMAC->MAXF = EMAC_ETH_MAX_FLEN;
+
+ /* Set RMII management clock rate to lowest speed */
+ LPC_EMAC->MCFG = EMAC_MCFG_CLK_SEL(11) | EMAC_MCFG_RES_MII;
+ LPC_EMAC->MCFG &= ~EMAC_MCFG_RES_MII;
+
+ /* Maximum number of retries, 0x37 collision window, gap */
+ LPC_EMAC->CLRT = EMAC_CLRT_DEF;
+ LPC_EMAC->IPGR = EMAC_IPGR_P1_DEF | EMAC_IPGR_P2_DEF;
+
+#if LPC_EMAC_RMII
+ /* RMII setup */
+ LPC_EMAC->Command = EMAC_CR_PASS_RUNT_FRM | EMAC_CR_RMII;
+#else
+ /* MII setup */
+ LPC_EMAC->CR = EMAC_CR_PASS_RUNT_FRM;
+#endif
+
+ /* Initialize the PHY and reset */
+ err = lpc_phy_init(netif, LPC_EMAC_RMII);
+ if (err != ERR_OK)
+ return err;
+
+ /* Save station address */
+ LPC_EMAC->SA2 = (u32_t) netif->hwaddr[0] |
+ (((u32_t) netif->hwaddr[1]) << 8);
+ LPC_EMAC->SA1 = (u32_t) netif->hwaddr[2] |
+ (((u32_t) netif->hwaddr[3]) << 8);
+ LPC_EMAC->SA0 = (u32_t) netif->hwaddr[4] |
+ (((u32_t) netif->hwaddr[5]) << 8);
+
+ /* Setup transmit and receive descriptors */
+ if (lpc_tx_setup(lpc_enetif) != ERR_OK)
+ return ERR_BUF;
+ if (lpc_rx_setup(lpc_enetif) != ERR_OK)
+ return ERR_BUF;
+
+ /* Enable packet reception */
+#if IP_SOF_BROADCAST_RECV
+ LPC_EMAC->RxFilterCtrl = EMAC_RFC_PERFECT_EN | EMAC_RFC_BCAST_EN;
+#else
+ LPC_EMAC->RxFilterCtrl = EMAC_RFC_PERFECT_EN;
+#endif
+
+ /* Clear and enable rx/tx interrupts */
+ LPC_EMAC->IntClear = 0xFFFF;
+ LPC_EMAC->IntEnable = RXINTGROUP | TXINTGROUP;
+
+ /* Enable RX and TX */
+ LPC_EMAC->Command |= EMAC_CR_RX_EN | EMAC_CR_TX_EN;
+ LPC_EMAC->MAC1 |= EMAC_MAC1_REC_EN;
+
+ return err;
+}
+
+/* This function provides a method for the PHY to setup the EMAC
+ for the PHY negotiated duplex mode */
+void lpc_emac_set_duplex(int full_duplex)
+{
+ if (full_duplex) {
+ LPC_EMAC->MAC2 |= EMAC_MAC2_FULL_DUP;
+ LPC_EMAC->Command |= EMAC_CR_FULL_DUP;
+ LPC_EMAC->IPGT = EMAC_IPGT_FULL_DUP;
+ } else {
+ LPC_EMAC->MAC2 &= ~EMAC_MAC2_FULL_DUP;
+ LPC_EMAC->Command &= ~EMAC_CR_FULL_DUP;
+ LPC_EMAC->IPGT = EMAC_IPGT_HALF_DUP;
+ }
+}
+
+/* This function provides a method for the PHY to setup the EMAC
+ for the PHY negotiated bit rate */
+void lpc_emac_set_speed(int mbs_100)
+{
+ if (mbs_100)
+ LPC_EMAC->SUPP = EMAC_SUPP_SPEED;
+ else
+ LPC_EMAC->SUPP = 0;
+}
+
+/**
+ * This function is the ethernet packet send function. It calls
+ * etharp_output after checking link status.
+ *
+ * \param[in] netif the lwip network interface structure for this lpc_enetif
+ * \param[in] q Pointer to pbug to send
+ * \param[in] ipaddr IP address
+ * \return ERR_OK or error code
+ */
+err_t lpc_etharp_output(struct netif *netif, struct pbuf *q,
+ ip_addr_t *ipaddr)
+{
+ /* Only send packet is link is up */
+ if (netif->flags & NETIF_FLAG_LINK_UP)
+ return etharp_output(netif, q, ipaddr);
+
+ return ERR_CONN;
+}
+
+#if NO_SYS == 0
+/* periodic PHY status update */
+void phy_update(void const *nif) {
+ lpc_phy_sts_sm((struct netif*)nif);
+}
+osTimerDef(phy_update, phy_update);
+#endif
+
+/**
+ * Should be called at the beginning of the program to set up the
+ * network interface.
+ *
+ * This function should be passed as a parameter to netif_add().
+ *
+ * @param[in] netif the lwip network interface structure for this lpc_enetif
+ * @return ERR_OK if the loopif is initialized
+ * ERR_MEM if private data couldn't be allocated
+ * any other err_t on error
+ */
+err_t lpc_enetif_init(struct netif *netif)
+{
+ err_t err;
+
+ LWIP_ASSERT("netif != NULL", (netif != NULL));
+
+ lpc_enetdata.netif = netif;
+
+ /* set MAC hardware address */
+ mbed_mac_address((char *)netif->hwaddr);
+ netif->hwaddr_len = ETHARP_HWADDR_LEN;
+
+ /* maximum transfer unit */
+ netif->mtu = 1500;
+
+ /* device capabilities */
+ netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_ETHERNET;
+
+ /* Initialize the hardware */
+ netif->state = &lpc_enetdata;
+ err = low_level_init(netif);
+ if (err != ERR_OK)
+ return err;
+
+#if LWIP_NETIF_HOSTNAME
+ /* Initialize interface hostname */
+ netif->hostname = "lwiplpc";
+#endif /* LWIP_NETIF_HOSTNAME */
+
+ netif->name[0] = 'e';
+ netif->name[1] = 'n';
+
+ netif->output = lpc_etharp_output;
+ netif->linkoutput = lpc_low_level_output;
+
+ /* CMSIS-RTOS, start tasks */
+#if NO_SYS == 0
+#ifdef CMSIS_OS_RTX
+ memset(lpc_enetdata.xTXDCountSem.data, 0, sizeof(lpc_enetdata.xTXDCountSem.data));
+ lpc_enetdata.xTXDCountSem.def.semaphore = lpc_enetdata.xTXDCountSem.data;
+#endif
+ lpc_enetdata.xTXDCountSem.id = osSemaphoreCreate(&lpc_enetdata.xTXDCountSem.def, LPC_NUM_BUFF_TXDESCS);
+ LWIP_ASSERT("xTXDCountSem creation error", (lpc_enetdata.xTXDCountSem.id != NULL));
+
+ err = sys_mutex_new(&lpc_enetdata.TXLockMutex);
+ LWIP_ASSERT("TXLockMutex creation error", (err == ERR_OK));
+
+ /* Packet receive task */
+ err = sys_sem_new(&lpc_enetdata.RxSem, 0);
+ LWIP_ASSERT("RxSem creation error", (err == ERR_OK));
+ sys_thread_new("receive_thread", packet_rx, netif->state, DEFAULT_THREAD_STACKSIZE, RX_PRIORITY);
+
+ /* Transmit cleanup task */
+ err = sys_sem_new(&lpc_enetdata.TxCleanSem, 0);
+ LWIP_ASSERT("TxCleanSem creation error", (err == ERR_OK));
+ sys_thread_new("txclean_thread", packet_tx, netif->state, DEFAULT_THREAD_STACKSIZE, TX_PRIORITY);
+
+ /* periodic PHY status update */
+ osTimerId phy_timer = osTimerCreate(osTimer(phy_update), osTimerPeriodic, (void *)netif);
+ osTimerStart(phy_timer, 250);
+#endif
+
+ return ERR_OK;
+}
+
+/**
+ * @}
+ */
+
+/* --------------------------------- End Of File ------------------------------ */