Doug Anson / lwip-eth-ansond-patched

patched lwip-eth with https://github.com/mbedmicro/mbed/commit/8222bde1af2e328e4c58d0f438827f3091e5e0eb

Dependents:   EthernetInterface

Fork of lwip-eth by mbed official

arch/lpc_phy_dp83848.c@10:76fbd6b7c5e5, 2013-11-11 (annotated)

Committer:
ansond
Date:
Mon Nov 11 18:52:39 2013 +0000
Revision:
10:76fbd6b7c5e5
Parent:
7:5754e05385b8 
https://github.com/mbedmicro/mbed/commit/8222bde1af2e328e4c58d0f438827f3091e5e0eb

Who changed what in which revision?

UserRevisionLine numberNew contents of line
emilmont 4:d827a085afd9 1 /**********************************************************************
emilmont 5:698d868a5285 2 * $Id$ lpc_phy_dp83848.c 2011-11-20
emilmont 4:d827a085afd9 3 *//**
emilmont 5:698d868a5285 4 * @file lpc_phy_dp83848.c
emilmont 5:698d868a5285 5 * @brief DP83848C PHY status and control.
emilmont 5:698d868a5285 6 * @version 1.0
emilmont 5:698d868a5285 7 * @date 20 Nov. 2011
emilmont 5:698d868a5285 8 * @author NXP MCU SW Application Team
emilmont 4:d827a085afd9 9 *
emilmont 4:d827a085afd9 10 * Copyright(C) 2011, NXP Semiconductor
emilmont 4:d827a085afd9 11 * All rights reserved.
emilmont 4:d827a085afd9 12 *
emilmont 4:d827a085afd9 13 ***********************************************************************
emilmont 4:d827a085afd9 14 * Software that is described herein is for illustrative purposes only
emilmont 4:d827a085afd9 15 * which provides customers with programming information regarding the
emilmont 4:d827a085afd9 16 * products. This software is supplied "AS IS" without any warranties.
emilmont 4:d827a085afd9 17 * NXP Semiconductors assumes no responsibility or liability for the
emilmont 4:d827a085afd9 18 * use of the software, conveys no license or title under any patent,
emilmont 4:d827a085afd9 19 * copyright, or mask work right to the product. NXP Semiconductors
emilmont 4:d827a085afd9 20 * reserves the right to make changes in the software without
emilmont 4:d827a085afd9 21 * notification. NXP Semiconductors also make no representation or
emilmont 4:d827a085afd9 22 * warranty that such application will be suitable for the specified
emilmont 4:d827a085afd9 23 * use without further testing or modification.
emilmont 4:d827a085afd9 24 **********************************************************************/
emilmont 4:d827a085afd9 25
emilmont 4:d827a085afd9 26 #include "lwip/opt.h"
emilmont 4:d827a085afd9 27 #include "lwip/err.h"
emilmont 4:d827a085afd9 28 #include "lwip/tcpip.h"
emilmont 4:d827a085afd9 29 #include "lwip/snmp.h"
emilmont 4:d827a085afd9 30 #include "lpc_emac_config.h"
emilmont 4:d827a085afd9 31 #include "lpc_phy.h"
emilmont 4:d827a085afd9 32
emilmont 5:698d868a5285 33 /** @defgroup dp83848_phy PHY status and control for the DP83848.
emilmont 4:d827a085afd9 34 * @ingroup lwip_phy
emilmont 4:d827a085afd9 35 *
emilmont 4:d827a085afd9 36 * Various functions for controlling and monitoring the status of the
emilmont 4:d827a085afd9 37 * DP83848 PHY. In polled (standalone) systems, the PHY state must be
emilmont 4:d827a085afd9 38 * monitored as part of the application. In a threaded (RTOS) system,
emilmont 4:d827a085afd9 39 * the PHY state is monitored by the PHY handler thread. The MAC
emilmont 4:d827a085afd9 40 * driver will not transmit unless the PHY link is active.
emilmont 4:d827a085afd9 41 * @{
emilmont 4:d827a085afd9 42 */
emilmont 4:d827a085afd9 43
emilmont 4:d827a085afd9 44 /** \brief DP83848 PHY register offsets */
emilmont 4:d827a085afd9 45 #define DP8_BMCR_REG 0x0 /**< Basic Mode Control Register */
emilmont 4:d827a085afd9 46 #define DP8_BMSR_REG 0x1 /**< Basic Mode Status Reg */
emilmont 5:698d868a5285 47 #define DP8_IDR1_REG 0x2 /**< Basic Mode Status Reg */
emilmont 5:698d868a5285 48 #define DP8_IDR2_REG 0x3 /**< Basic Mode Status Reg */
emilmont 4:d827a085afd9 49 #define DP8_ANADV_REG 0x4 /**< Auto_Neg Advt Reg */
emilmont 4:d827a085afd9 50 #define DP8_ANLPA_REG 0x5 /**< Auto_neg Link Partner Ability Reg */
emilmont 4:d827a085afd9 51 #define DP8_ANEEXP_REG 0x6 /**< Auto-neg Expansion Reg */
emilmont 4:d827a085afd9 52 #define DP8_PHY_STAT_REG 0x10 /**< PHY Status Register */
emilmont 4:d827a085afd9 53 #define DP8_PHY_INT_CTL_REG 0x11 /**< PHY Interrupt Control Register */
emilmont 4:d827a085afd9 54 #define DP8_PHY_RBR_REG 0x17 /**< PHY RMII and Bypass Register */
emilmont 4:d827a085afd9 55 #define DP8_PHY_STS_REG 0x19 /**< PHY Status Register */
emilmont 4:d827a085afd9 56
emilmont 5:698d868a5285 57 #define DP8_PHY_SCSR_REG 0x1f /**< PHY Special Control/Status Register (LAN8720) */
emilmont 5:698d868a5285 58
emilmont 4:d827a085afd9 59 /** \brief DP83848 Control register definitions */
emilmont 4:d827a085afd9 60 #define DP8_RESET (1 << 15) /**< 1= S/W Reset */
emilmont 4:d827a085afd9 61 #define DP8_LOOPBACK (1 << 14) /**< 1=loopback Enabled */
emilmont 4:d827a085afd9 62 #define DP8_SPEED_SELECT (1 << 13) /**< 1=Select 100MBps */
emilmont 4:d827a085afd9 63 #define DP8_AUTONEG (1 << 12) /**< 1=Enable auto-negotiation */
emilmont 4:d827a085afd9 64 #define DP8_POWER_DOWN (1 << 11) /**< 1=Power down PHY */
emilmont 4:d827a085afd9 65 #define DP8_ISOLATE (1 << 10) /**< 1=Isolate PHY */
emilmont 4:d827a085afd9 66 #define DP8_RESTART_AUTONEG (1 << 9) /**< 1=Restart auto-negoatiation */
emilmont 4:d827a085afd9 67 #define DP8_DUPLEX_MODE (1 << 8) /**< 1=Full duplex mode */
emilmont 4:d827a085afd9 68 #define DP8_COLLISION_TEST (1 << 7) /**< 1=Perform collsion test */
emilmont 4:d827a085afd9 69
emilmont 4:d827a085afd9 70 /** \brief DP83848 Status register definitions */
emilmont 4:d827a085afd9 71 #define DP8_100BASE_T4 (1 << 15) /**< T4 mode */
emilmont 4:d827a085afd9 72 #define DP8_100BASE_TX_FD (1 << 14) /**< 100MBps full duplex */
emilmont 4:d827a085afd9 73 #define DP8_100BASE_TX_HD (1 << 13) /**< 100MBps half duplex */
emilmont 4:d827a085afd9 74 #define DP8_10BASE_T_FD (1 << 12) /**< 100Bps full duplex */
emilmont 4:d827a085afd9 75 #define DP8_10BASE_T_HD (1 << 11) /**< 10MBps half duplex */
emilmont 4:d827a085afd9 76 #define DP8_MF_PREAMB_SUPPR (1 << 6) /**< Preamble suppress */
emilmont 4:d827a085afd9 77 #define DP8_AUTONEG_COMP (1 << 5) /**< Auto-negotation complete */
emilmont 4:d827a085afd9 78 #define DP8_RMT_FAULT (1 << 4) /**< Fault */
emilmont 4:d827a085afd9 79 #define DP8_AUTONEG_ABILITY (1 << 3) /**< Auto-negotation supported */
emilmont 4:d827a085afd9 80 #define DP8_LINK_STATUS (1 << 2) /**< 1=Link active */
emilmont 4:d827a085afd9 81 #define DP8_JABBER_DETECT (1 << 1) /**< Jabber detect */
emilmont 4:d827a085afd9 82 #define DP8_EXTEND_CAPAB (1 << 0) /**< Supports extended capabilities */
emilmont 4:d827a085afd9 83
emilmont 4:d827a085afd9 84 /** \brief DP83848 PHY RBR MII dode definitions */
emilmont 4:d827a085afd9 85 #define DP8_RBR_RMII_MODE (1 << 5) /**< Use RMII mode */
emilmont 4:d827a085afd9 86
emilmont 4:d827a085afd9 87 /** \brief DP83848 PHY status definitions */
emilmont 4:d827a085afd9 88 #define DP8_REMOTEFAULT (1 << 6) /**< Remote fault */
emilmont 4:d827a085afd9 89 #define DP8_FULLDUPLEX (1 << 2) /**< 1=full duplex */
emilmont 4:d827a085afd9 90 #define DP8_SPEED10MBPS (1 << 1) /**< 1=10MBps speed */
emilmont 4:d827a085afd9 91 #define DP8_VALID_LINK (1 << 0) /**< 1=Link active */
emilmont 4:d827a085afd9 92
emilmont 4:d827a085afd9 93 /** \brief DP83848 PHY ID register definitions */
emilmont 4:d827a085afd9 94 #define DP8_PHYID1_OUI 0x2000 /**< Expected PHY ID1 */
emilmont 4:d827a085afd9 95 #define DP8_PHYID2_OUI 0x5c90 /**< Expected PHY ID2 */
emilmont 4:d827a085afd9 96
emilmont 5:698d868a5285 97 /** \brief LAN8720 PHY Special Control/Status Register */
emilmont 5:698d868a5285 98 #define PHY_SCSR_100MBIT 0x0008 /**< Speed: 1=100 MBit, 0=10Mbit */
emilmont 5:698d868a5285 99 #define PHY_SCSR_DUPLEX 0x0010 /**< PHY Duplex Mask */
emilmont 5:698d868a5285 100
emilmont 5:698d868a5285 101 /** \brief Link status bits */
emilmont 5:698d868a5285 102 #define LNK_STAT_VALID 0x01
emilmont 5:698d868a5285 103 #define LNK_STAT_FULLDUPLEX 0x02
emilmont 5:698d868a5285 104 #define LNK_STAT_SPEED10MPS 0x04
emilmont 5:698d868a5285 105
emilmont 5:698d868a5285 106 /** \brief PHY ID definitions */
emilmont 5:698d868a5285 107 #define DP83848C_ID 0x20005C90 /**< PHY Identifier - DP83848C */
emilmont 5:698d868a5285 108 #define LAN8720_ID 0x0007C0F0 /**< PHY Identifier - LAN8720 */
emilmont 5:698d868a5285 109
emilmont 4:d827a085afd9 110 /** \brief PHY status structure used to indicate current status of PHY.
emilmont 4:d827a085afd9 111 */
emilmont 4:d827a085afd9 112 typedef struct {
emilmont 5:698d868a5285 113 u32_t phy_speed_100mbs:1; /**< 10/100 MBS connection speed flag. */
emilmont 5:698d868a5285 114 u32_t phy_full_duplex:1; /**< Half/full duplex connection speed flag. */
emilmont 5:698d868a5285 115 u32_t phy_link_active:1; /**< Phy link active flag. */
emilmont 4:d827a085afd9 116 } PHY_STATUS_TYPE;
emilmont 4:d827a085afd9 117
emilmont 4:d827a085afd9 118 /** \brief PHY update flags */
emilmont 4:d827a085afd9 119 static PHY_STATUS_TYPE physts;
emilmont 4:d827a085afd9 120
emilmont 4:d827a085afd9 121 /** \brief Last PHY update flags, used for determing if something has changed */
emilmont 4:d827a085afd9 122 static PHY_STATUS_TYPE olddphysts;
emilmont 4:d827a085afd9 123
emilmont 4:d827a085afd9 124 /** \brief PHY update counter for state machine */
emilmont 4:d827a085afd9 125 static s32_t phyustate;
emilmont 4:d827a085afd9 126
emilmont 5:698d868a5285 127 /** \brief Holds the PHY ID */
emilmont 5:698d868a5285 128 static u32_t phy_id;
emilmont 5:698d868a5285 129
emilmont 5:698d868a5285 130 /** \brief Temporary holder of link status for LAN7420 */
emilmont 5:698d868a5285 131 static u32_t phy_lan7420_sts_tmp;
emilmont 5:698d868a5285 132
emilmont 4:d827a085afd9 133 /** \brief Update PHY status from passed value
emilmont 4:d827a085afd9 134 *
emilmont 4:d827a085afd9 135 * This function updates the current PHY status based on the
emilmont 4:d827a085afd9 136 * passed PHY status word. The PHY status indicate if the link
emilmont 4:d827a085afd9 137 * is active, the connection speed, and duplex.
emilmont 4:d827a085afd9 138 *
emilmont 4:d827a085afd9 139 * \param[in] netif NETIF structure
emilmont 4:d827a085afd9 140 * \param[in] linksts Status word from PHY
emilmont 4:d827a085afd9 141 * \return 1 if the status has changed, otherwise 0
emilmont 4:d827a085afd9 142 */
emilmont 4:d827a085afd9 143 static s32_t lpc_update_phy_sts(struct netif *netif, u32_t linksts)
emilmont 4:d827a085afd9 144 {
emilmont 5:698d868a5285 145 s32_t changed = 0;
emilmont 4:d827a085afd9 146
emilmont 5:698d868a5285 147 /* Update link active status */
emilmont 5:698d868a5285 148 if (linksts & LNK_STAT_VALID)
emilmont 5:698d868a5285 149 physts.phy_link_active = 1;
emilmont 5:698d868a5285 150 else
emilmont 5:698d868a5285 151 physts.phy_link_active = 0;
emilmont 4:d827a085afd9 152
emilmont 5:698d868a5285 153 /* Full or half duplex */
emilmont 5:698d868a5285 154 if (linksts & LNK_STAT_FULLDUPLEX)
emilmont 5:698d868a5285 155 physts.phy_full_duplex = 1;
emilmont 5:698d868a5285 156 else
emilmont 5:698d868a5285 157 physts.phy_full_duplex = 0;
emilmont 4:d827a085afd9 158
emilmont 5:698d868a5285 159 /* Configure 100MBit/10MBit mode. */
emilmont 5:698d868a5285 160 if (linksts & LNK_STAT_SPEED10MPS)
emilmont 5:698d868a5285 161 physts.phy_speed_100mbs = 0;
emilmont 5:698d868a5285 162 else
emilmont 5:698d868a5285 163 physts.phy_speed_100mbs = 1;
emilmont 4:d827a085afd9 164
emilmont 5:698d868a5285 165 if (physts.phy_speed_100mbs != olddphysts.phy_speed_100mbs) {
emilmont 5:698d868a5285 166 changed = 1;
emilmont 5:698d868a5285 167 if (physts.phy_speed_100mbs) {
emilmont 5:698d868a5285 168 /* 100MBit mode. */
emilmont 5:698d868a5285 169 lpc_emac_set_speed(1);
emilmont 4:d827a085afd9 170
emilmont 5:698d868a5285 171 NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 100000000);
emilmont 5:698d868a5285 172 }
emilmont 5:698d868a5285 173 else {
emilmont 5:698d868a5285 174 /* 10MBit mode. */
emilmont 5:698d868a5285 175 lpc_emac_set_speed(0);
emilmont 4:d827a085afd9 176
emilmont 5:698d868a5285 177 NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 10000000);
emilmont 5:698d868a5285 178 }
emilmont 4:d827a085afd9 179
emilmont 5:698d868a5285 180 olddphysts.phy_speed_100mbs = physts.phy_speed_100mbs;
emilmont 5:698d868a5285 181 }
emilmont 4:d827a085afd9 182
emilmont 5:698d868a5285 183 if (physts.phy_full_duplex != olddphysts.phy_full_duplex) {
emilmont 5:698d868a5285 184 changed = 1;
emilmont 5:698d868a5285 185 if (physts.phy_full_duplex)
emilmont 5:698d868a5285 186 lpc_emac_set_duplex(1);
emilmont 5:698d868a5285 187 else
emilmont 5:698d868a5285 188 lpc_emac_set_duplex(0);
emilmont 4:d827a085afd9 189
emilmont 5:698d868a5285 190 olddphysts.phy_full_duplex = physts.phy_full_duplex;
emilmont 5:698d868a5285 191 }
emilmont 4:d827a085afd9 192
emilmont 5:698d868a5285 193 if (physts.phy_link_active != olddphysts.phy_link_active) {
emilmont 5:698d868a5285 194 changed = 1;
emilmont 4:d827a085afd9 195 #if NO_SYS == 1
emilmont 5:698d868a5285 196 if (physts.phy_link_active)
emilmont 5:698d868a5285 197 netif_set_link_up(netif);
emilmont 5:698d868a5285 198 else
emilmont 5:698d868a5285 199 netif_set_link_down(netif);
emilmont 4:d827a085afd9 200 #else
emilmont 4:d827a085afd9 201 if (physts.phy_link_active)
emilmont 4:d827a085afd9 202 tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_up,
emilmont 4:d827a085afd9 203 (void*) netif, 1);
emilmont 4:d827a085afd9 204 else
emilmont 4:d827a085afd9 205 tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_down,
emilmont 4:d827a085afd9 206 (void*) netif, 1);
emilmont 4:d827a085afd9 207 #endif
emilmont 4:d827a085afd9 208
emilmont 5:698d868a5285 209 olddphysts.phy_link_active = physts.phy_link_active;
emilmont 5:698d868a5285 210 }
emilmont 4:d827a085afd9 211
emilmont 5:698d868a5285 212 return changed;
emilmont 4:d827a085afd9 213 }
emilmont 4:d827a085afd9 214
emilmont 4:d827a085afd9 215 /** \brief Initialize the DP83848 PHY.
emilmont 4:d827a085afd9 216 *
emilmont 4:d827a085afd9 217 * This function initializes the DP83848 PHY. It will block until
emilmont 4:d827a085afd9 218 * complete. This function is called as part of the EMAC driver
emilmont 4:d827a085afd9 219 * initialization. Configuration of the PHY at startup is
emilmont 4:d827a085afd9 220 * controlled by setting up configuration defines in lpc_phy.h.
emilmont 4:d827a085afd9 221 *
emilmont 4:d827a085afd9 222 * \param[in] netif NETIF structure
emilmont 4:d827a085afd9 223 * \param[in] rmii If set, configures the PHY for RMII mode
emilmont 4:d827a085afd9 224 * \return ERR_OK if the setup was successful, otherwise ERR_TIMEOUT
emilmont 4:d827a085afd9 225 */
emilmont 4:d827a085afd9 226 err_t lpc_phy_init(struct netif *netif, int rmii)
emilmont 4:d827a085afd9 227 {
emilmont 5:698d868a5285 228 u32_t tmp;
emilmont 5:698d868a5285 229 s32_t i;
emilmont 5:698d868a5285 230
bogdanm 7:5754e05385b8 231 physts.phy_speed_100mbs = olddphysts.phy_speed_100mbs = 0;
bogdanm 7:5754e05385b8 232 physts.phy_full_duplex = olddphysts.phy_full_duplex = 0;
bogdanm 7:5754e05385b8 233 physts.phy_link_active = olddphysts.phy_link_active = 0;
emilmont 5:698d868a5285 234 phyustate = 0;
emilmont 4:d827a085afd9 235
emilmont 5:698d868a5285 236 /* Only first read and write are checked for failure */
emilmont 5:698d868a5285 237 /* Put the DP83848C in reset mode and wait for completion */
emilmont 5:698d868a5285 238 if (lpc_mii_write(DP8_BMCR_REG, DP8_RESET) != 0)
emilmont 5:698d868a5285 239 return ERR_TIMEOUT;
emilmont 5:698d868a5285 240 i = 400;
emilmont 5:698d868a5285 241 while (i > 0) {
emilmont 5:698d868a5285 242 osDelay(1); /* 1 ms */
emilmont 5:698d868a5285 243 if (lpc_mii_read(DP8_BMCR_REG, &tmp) != 0)
emilmont 5:698d868a5285 244 return ERR_TIMEOUT;
emilmont 4:d827a085afd9 245
emilmont 5:698d868a5285 246 if (!(tmp & (DP8_RESET | DP8_POWER_DOWN)))
emilmont 5:698d868a5285 247 i = -1;
emilmont 5:698d868a5285 248 else
emilmont 5:698d868a5285 249 i--;
emilmont 5:698d868a5285 250 }
emilmont 5:698d868a5285 251 /* Timeout? */
emilmont 5:698d868a5285 252 if (i == 0)
emilmont 5:698d868a5285 253 return ERR_TIMEOUT;
emilmont 4:d827a085afd9 254
emilmont 5:698d868a5285 255 // read PHY ID
emilmont 5:698d868a5285 256 lpc_mii_read(DP8_IDR1_REG, &tmp);
emilmont 5:698d868a5285 257 phy_id = (tmp << 16);
emilmont 5:698d868a5285 258 lpc_mii_read(DP8_IDR2_REG, &tmp);
emilmont 5:698d868a5285 259 phy_id |= (tmp & 0XFFF0);
emilmont 4:d827a085afd9 260
emilmont 5:698d868a5285 261 /* Setup link based on configuration options */
emilmont 4:d827a085afd9 262 #if PHY_USE_AUTONEG==1
emilmont 5:698d868a5285 263 tmp = DP8_AUTONEG;
emilmont 4:d827a085afd9 264 #else
emilmont 5:698d868a5285 265 tmp = 0;
emilmont 4:d827a085afd9 266 #endif
emilmont 4:d827a085afd9 267 #if PHY_USE_100MBS==1
emilmont 5:698d868a5285 268 tmp |= DP8_SPEED_SELECT;
emilmont 4:d827a085afd9 269 #endif
emilmont 4:d827a085afd9 270 #if PHY_USE_FULL_DUPLEX==1
emilmont 5:698d868a5285 271 tmp |= DP8_DUPLEX_MODE;
emilmont 4:d827a085afd9 272 #endif
emilmont 5:698d868a5285 273 lpc_mii_write(DP8_BMCR_REG, tmp);
emilmont 4:d827a085afd9 274
emilmont 4:d827a085afd9 275 /* Enable RMII mode for PHY */
emilmont 4:d827a085afd9 276 if (rmii)
emilmont 4:d827a085afd9 277 lpc_mii_write(DP8_PHY_RBR_REG, DP8_RBR_RMII_MODE);
emilmont 4:d827a085afd9 278
emilmont 5:698d868a5285 279 /* The link is not set active at this point, but will be detected
emilmont 4:d827a085afd9 280 later */
emilmont 4:d827a085afd9 281
emilmont 5:698d868a5285 282 return ERR_OK;
emilmont 4:d827a085afd9 283 }
emilmont 4:d827a085afd9 284
emilmont 4:d827a085afd9 285 /* Phy status update state machine */
emilmont 4:d827a085afd9 286 s32_t lpc_phy_sts_sm(struct netif *netif)
emilmont 4:d827a085afd9 287 {
emilmont 5:698d868a5285 288 s32_t changed = 0;
emilmont 5:698d868a5285 289 u32_t data = 0;
emilmont 5:698d868a5285 290 u32_t tmp;
emilmont 4:d827a085afd9 291
emilmont 5:698d868a5285 292 switch (phyustate) {
emilmont 5:698d868a5285 293 default:
emilmont 5:698d868a5285 294 case 0:
emilmont 5:698d868a5285 295 if (phy_id == DP83848C_ID) {
emilmont 5:698d868a5285 296 lpc_mii_read_noblock(DP8_PHY_STAT_REG);
emilmont 5:698d868a5285 297 phyustate = 2;
emilmont 5:698d868a5285 298 }
emilmont 5:698d868a5285 299 else if (phy_id == LAN8720_ID) {
emilmont 5:698d868a5285 300 lpc_mii_read_noblock(DP8_PHY_SCSR_REG);
emilmont 5:698d868a5285 301 phyustate = 1;
emilmont 5:698d868a5285 302 }
emilmont 5:698d868a5285 303 break;
emilmont 5:698d868a5285 304
emilmont 5:698d868a5285 305 case 1:
emilmont 5:698d868a5285 306 if (phy_id == LAN8720_ID) {
emilmont 5:698d868a5285 307 tmp = lpc_mii_read_data();
emilmont 5:698d868a5285 308 // we get speed and duplex here.
emilmont 5:698d868a5285 309 phy_lan7420_sts_tmp = (tmp & PHY_SCSR_DUPLEX) ? LNK_STAT_FULLDUPLEX : 0;
emilmont 5:698d868a5285 310 phy_lan7420_sts_tmp |= (tmp & PHY_SCSR_100MBIT) ? 0 : LNK_STAT_SPEED10MPS;
emilmont 4:d827a085afd9 311
emilmont 5:698d868a5285 312 //read the status register to get link status
emilmont 5:698d868a5285 313 lpc_mii_read_noblock(DP8_BMSR_REG);
emilmont 5:698d868a5285 314 phyustate = 2;
emilmont 5:698d868a5285 315 }
emilmont 5:698d868a5285 316 break;
emilmont 5:698d868a5285 317
emilmont 5:698d868a5285 318 case 2:
emilmont 5:698d868a5285 319 /* Wait for read status state */
emilmont 5:698d868a5285 320 if (!lpc_mii_is_busy()) {
emilmont 5:698d868a5285 321 /* Update PHY status */
emilmont 5:698d868a5285 322 tmp = lpc_mii_read_data();
emilmont 4:d827a085afd9 323
emilmont 5:698d868a5285 324 if (phy_id == DP83848C_ID) {
emilmont 5:698d868a5285 325 // STS register contains all needed status bits
emilmont 5:698d868a5285 326 data = (tmp & DP8_VALID_LINK) ? LNK_STAT_VALID : 0;
emilmont 5:698d868a5285 327 data |= (tmp & DP8_FULLDUPLEX) ? LNK_STAT_FULLDUPLEX : 0;
emilmont 5:698d868a5285 328 data |= (tmp & DP8_SPEED10MBPS) ? LNK_STAT_SPEED10MPS : 0;
emilmont 5:698d868a5285 329 }
emilmont 5:698d868a5285 330 else if (phy_id == LAN8720_ID) {
emilmont 5:698d868a5285 331 // we only get the link status here.
emilmont 5:698d868a5285 332 phy_lan7420_sts_tmp |= (tmp & DP8_LINK_STATUS) ? LNK_STAT_VALID : 0;
emilmont 5:698d868a5285 333 data = phy_lan7420_sts_tmp;
emilmont 5:698d868a5285 334 }
emilmont 5:698d868a5285 335
emilmont 5:698d868a5285 336 changed = lpc_update_phy_sts(netif, data);
emilmont 5:698d868a5285 337 phyustate = 0;
emilmont 5:698d868a5285 338 }
emilmont 5:698d868a5285 339 break;
emilmont 5:698d868a5285 340 }
emilmont 5:698d868a5285 341
emilmont 5:698d868a5285 342 return changed;
emilmont 4:d827a085afd9 343 }
emilmont 4:d827a085afd9 344
emilmont 4:d827a085afd9 345 /**
emilmont 4:d827a085afd9 346 * @}
emilmont 4:d827a085afd9 347 */
emilmont 4:d827a085afd9 348
emilmont 4:d827a085afd9 349 /* --------------------------------- End Of File ------------------------------ */