Diff: main.cpp

Revision:

0:6b414fe5f8db

Child:

1:3ad5d55e1cc7

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Thu Mar 05 18:24:04 2015 +0000
@@ -0,0 +1,102 @@
+/**
+ * @file    main.cpp
+ * @brief   mbed Connected Home Endpoint main entry point
+ * @author  Doug Anson
+ * @version 1.0
+ * @see
+ *
+ * Copyright (c) 2014
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+// mbed Connector Interface (configuration)
+#include "mbedConnectorInterface.h"
+
+// mbed Connector Endpoint includes
+#include "ConnectorEndpoint.h"
+#include "OptionsBuilder.h"
+
+// USB Serial port access for debugging/logging
+RawSerial pc(USBTX,USBRX);
+
+// Logging facility
+Logger logger(&pc);
+
+// Static Resources
+#include "StaticResource.h"
+StaticResource mfg(&logger,"dev/mfg","Nordic Semi");
+StaticResource model(&logger,"dev/mdl","nRF51-DK");
+
+//
+// Dynamic Resource Note:
+//
+//  mbedConnectorInterface supports up to IPT_MAX_ENTRIES 
+//  (currently 5) independent dynamic resources.
+//
+//  You can increase this (at the cost of memory) in 
+//  mbedConnectorinterface.h
+//
+
+// Heartrate Resource
+#include "HeartrateResource.h"
+HeartrateResource hr(&logger,"888/0/5850");   
+
+// Set our own unique endpoint name
+#define MY_ENDPOINT_NAME                       "ble-hrm-endpt"
+
+// My NSP Domain
+#define MY_NSP_DOMAIN                          "domain"                               
+
+// Customization Example: My custom NSP IPv6 address and NSP CoAP port
+//uint8_t my_nsp_address[NSP_IP_ADDRESS_LENGTH] = {72,182,4,230}; 
+//int my_nsp_coap_port                          = 26395;          // www.ansonworks.com:27164
+
+// Customization Example: My custom NSP IPv6 address and NSP CoAP port
+uint8_t my_nsp_address[NSP_IP_ADDRESS_LENGTH] = {10,1,0,26}; 
+int my_nsp_coap_port                          = 5683;
+
+// called from the Endpoint::start() below to create resources and the endpoint internals...
+Connector::Options *configure_endpoint(Connector::OptionsBuilder &config)
+{
+    // Build the endpoint configuration parameters
+    logger.log("configure_endpoint: building endpoint configuration...");
+    return config.setEndpointNodename(MY_ENDPOINT_NAME)                   // custom endpoint name
+                 .setNSPAddress(my_nsp_address)                           // custom NSP address
+                 .setDomain(MY_NSP_DOMAIN)                                // custom NSP domain
+                 .setNSPPortNumber(my_nsp_coap_port)                      // custom NSP CoAP port
+                 
+                 // add the static resource representing this endpoint
+                 .addResource(&mfg)
+                 .addResource(&model)
+                 
+                 // add the heartrate resource
+                 .addResource(&hr)
+                                      
+                 // finalize the configuration...
+                 .build();
+}
+
+// main entry point...
+int main()
+{    
+    // Announce
+    logger.log("\r\n\r\nmbed mDS BLE Heartrate Endpoint");
+    
+    // we have to plumb our network first
+    Connector::Endpoint::plumbNetwork();
+     
+    // starts the endpoint by finalizing its configuration (configure_endpoint() above called),creating a Thread and reading NSP events...
+    logger.log("Start the endpoint to finish setup and enter the main loop...");
+    Connector::Endpoint::start();
+}