nhan pham an / Hobbyking_Cheetah_Compact_DRV8323_StepDir

Fork and fix for mwork

Dependencies:   mbed-dev-f303 FastPWM3 millis

main.cpp@52:cf8b2abf811d, 2020-02-27 (annotated)

Committer:
bdring
Date:
Thu Feb 27 00:13:18 2020 +0000
Revision:
52:cf8b2abf811d
Parent:
51:6cd89bd6fcaa
Child:
53:349304b6d937
Playing around wit ha few ideas

Who changed what in which revision?

UserRevisionLine numberNew contents of line
benkatz 22:60276ba87ac6 1 /// high-bandwidth 3-phase motor control, for robots
benkatz 45:26801179208e 2 /// Written by benkatz, with much inspiration from Bayley Wang, Nick Kirkby, Shane Colton, David Otten, and others
benkatz 22:60276ba87ac6 3 /// Hardware documentation can be found at build-its.blogspot.com
benkatz 22:60276ba87ac6 4 /// Written for the STM32F446, but can be implemented on other STM32 MCU's with some further register-diddling
benkatz 47:e1196a851f76 5 /// Version for the TI DRV8323 Everything Chip
benkatz 22:60276ba87ac6 6
benkatz 23:2adf23ee0305 7 #define REST_MODE 0
benkatz 23:2adf23ee0305 8 #define CALIBRATION_MODE 1
benkatz 26:2b865c00d7e9 9 #define MOTOR_MODE 2
benkatz 23:2adf23ee0305 10 #define SETUP_MODE 4
benkatz 23:2adf23ee0305 11 #define ENCODER_MODE 5
benkatz 22:60276ba87ac6 12
bdring 52:cf8b2abf811d 13 #define VERSION_NUM "1.9.1"
benkatz 26:2b865c00d7e9 14
benkatz 18:f1d56f4acb39 15
benkatz 26:2b865c00d7e9 16 float __float_reg[64]; // Floats stored in flash
benkatz 26:2b865c00d7e9 17 int __int_reg[256]; // Ints stored in flash. Includes position sensor calibration lookup table
benkatz 17:3c5df2982199 18
benkatz 0:4e1c4df6aabd 19 #include "mbed.h"
benkatz 0:4e1c4df6aabd 20 #include "PositionSensor.h"
benkatz 20:bf9ea5125d52 21 #include "structs.h"
benkatz 20:bf9ea5125d52 22 #include "foc.h"
benkatz 22:60276ba87ac6 23 #include "calibration.h"
benkatz 20:bf9ea5125d52 24 #include "hw_setup.h"
benkatz 23:2adf23ee0305 25 #include "math_ops.h"
benkatz 20:bf9ea5125d52 26 #include "current_controller_config.h"
benkatz 20:bf9ea5125d52 27 #include "hw_config.h"
benkatz 20:bf9ea5125d52 28 #include "motor_config.h"
benkatz 23:2adf23ee0305 29 #include "stm32f4xx_flash.h"
benkatz 23:2adf23ee0305 30 #include "FlashWriter.h"
benkatz 23:2adf23ee0305 31 #include "user_config.h"
benkatz 23:2adf23ee0305 32 #include "PreferenceWriter.h"
benkatz 42:738fa01b0346 33 #include "CAN_com.h"
benkatz 44:8040fa2fcb0d 34 #include "DRV.h"
benkatz 26:2b865c00d7e9 35
benkatz 23:2adf23ee0305 36 PreferenceWriter prefs(6);
benkatz 9:d7eb815cb057 37
benkatz 20:bf9ea5125d52 38 GPIOStruct gpio;
benkatz 20:bf9ea5125d52 39 ControllerStruct controller;
benkatz 48:74a40481740c 40 ObserverStruct observer;
benkatz 20:bf9ea5125d52 41 COMStruct com;
benkatz 43:dfb72608639c 42 Serial pc(PA_2, PA_3);
benkatz 9:d7eb815cb057 43
benkatz 17:3c5df2982199 44
benkatz 45:26801179208e 45 CAN can(PB_8, PB_9, 1000000); // CAN Rx pin name, CAN Tx pin name
benkatz 26:2b865c00d7e9 46 CANMessage rxMsg;
benkatz 26:2b865c00d7e9 47 CANMessage txMsg;
benkatz 23:2adf23ee0305 48
benkatz 20:bf9ea5125d52 49
benkatz 44:8040fa2fcb0d 50 SPI drv_spi(PA_7, PA_6, PA_5);
benkatz 44:8040fa2fcb0d 51 DigitalOut drv_cs(PA_4);
benkatz 44:8040fa2fcb0d 52 //DigitalOut drv_en_gate(PA_11);
benkatz 44:8040fa2fcb0d 53 DRV832x drv(&drv_spi, &drv_cs);
benkatz 8:10ae7bc88d6e 54
benkatz 26:2b865c00d7e9 55 PositionSensorAM5147 spi(16384, 0.0, NPP);
benkatz 20:bf9ea5125d52 56
benkatz 23:2adf23ee0305 57 volatile int count = 0;
benkatz 23:2adf23ee0305 58 volatile int state = REST_MODE;
benkatz 23:2adf23ee0305 59 volatile int state_change;
benkatz 20:bf9ea5125d52 60
benkatz 26:2b865c00d7e9 61 void onMsgReceived() {
benkatz 26:2b865c00d7e9 62 //msgAvailable = true;
bdring 52:cf8b2abf811d 63 //printf("%df\n\r", rxMsg.id);
benkatz 26:2b865c00d7e9 64 can.read(rxMsg);
benkatz 28:8c7e29f719c5 65 if((rxMsg.id == CAN_ID)){
benkatz 28:8c7e29f719c5 66 controller.timeout = 0;
benkatz 28:8c7e29f719c5 67 if(((rxMsg.data[0]==0xFF) & (rxMsg.data[1]==0xFF) & (rxMsg.data[2]==0xFF) & (rxMsg.data[3]==0xFF) & (rxMsg.data[4]==0xFF) & (rxMsg.data[5]==0xFF) & (rxMsg.data[6]==0xFF) & (rxMsg.data[7]==0xFC))){
benkatz 28:8c7e29f719c5 68 state = MOTOR_MODE;
benkatz 28:8c7e29f719c5 69 state_change = 1;
benkatz 28:8c7e29f719c5 70 }
benkatz 28:8c7e29f719c5 71 else if(((rxMsg.data[0]==0xFF) & (rxMsg.data[1]==0xFF) & (rxMsg.data[2]==0xFF) & (rxMsg.data[3]==0xFF) * (rxMsg.data[4]==0xFF) & (rxMsg.data[5]==0xFF) & (rxMsg.data[6]==0xFF) & (rxMsg.data[7]==0xFD))){
benkatz 28:8c7e29f719c5 72 state = REST_MODE;
benkatz 28:8c7e29f719c5 73 state_change = 1;
benkatz 37:c0f352d6e8e3 74 gpio.led->write(0);;
benkatz 28:8c7e29f719c5 75 }
benkatz 28:8c7e29f719c5 76 else if(((rxMsg.data[0]==0xFF) & (rxMsg.data[1]==0xFF) & (rxMsg.data[2]==0xFF) & (rxMsg.data[3]==0xFF) * (rxMsg.data[4]==0xFF) & (rxMsg.data[5]==0xFF) & (rxMsg.data[6]==0xFF) & (rxMsg.data[7]==0xFE))){
benkatz 28:8c7e29f719c5 77 spi.ZeroPosition();
benkatz 28:8c7e29f719c5 78 }
benkatz 28:8c7e29f719c5 79 else if(state == MOTOR_MODE){
benkatz 28:8c7e29f719c5 80 unpack_cmd(rxMsg, &controller);
benkatz 28:8c7e29f719c5 81 }
benkatz 37:c0f352d6e8e3 82 pack_reply(&txMsg, controller.theta_mech, controller.dtheta_mech, controller.i_q_filt*KT_OUT);
benkatz 37:c0f352d6e8e3 83 can.write(txMsg);
benkatz 28:8c7e29f719c5 84 }
benkatz 26:2b865c00d7e9 85
benkatz 26:2b865c00d7e9 86 }
benkatz 26:2b865c00d7e9 87
benkatz 23:2adf23ee0305 88 void enter_menu_state(void){
benkatz 44:8040fa2fcb0d 89 drv.disable_gd();
benkatz 47:e1196a851f76 90 //gpio.enable->write(0);
benkatz 23:2adf23ee0305 91 printf("\n\r\n\r\n\r");
benkatz 23:2adf23ee0305 92 printf(" Commands:\n\r");
benkatz 44:8040fa2fcb0d 93 wait_us(10);
benkatz 26:2b865c00d7e9 94 printf(" m - Motor Mode\n\r");
benkatz 44:8040fa2fcb0d 95 wait_us(10);
benkatz 23:2adf23ee0305 96 printf(" c - Calibrate Encoder\n\r");
benkatz 44:8040fa2fcb0d 97 wait_us(10);
benkatz 23:2adf23ee0305 98 printf(" s - Setup\n\r");
benkatz 44:8040fa2fcb0d 99 wait_us(10);
benkatz 23:2adf23ee0305 100 printf(" e - Display Encoder\n\r");
benkatz 44:8040fa2fcb0d 101 wait_us(10);
benkatz 37:c0f352d6e8e3 102 printf(" z - Set Zero Position\n\r");
benkatz 44:8040fa2fcb0d 103 wait_us(10);
bdring 52:cf8b2abf811d 104 printf(" o - To own it!\n\r");
bdring 52:cf8b2abf811d 105 wait_us(10);
benkatz 23:2adf23ee0305 106 printf(" esc - Exit to Menu\n\r");
benkatz 44:8040fa2fcb0d 107 wait_us(10);
benkatz 23:2adf23ee0305 108 state_change = 0;
benkatz 37:c0f352d6e8e3 109 gpio.led->write(0);
benkatz 23:2adf23ee0305 110 }
benkatz 24:58c2d7571207 111
benkatz 24:58c2d7571207 112 void enter_setup_state(void){
benkatz 24:58c2d7571207 113 printf("\n\r\n\r Configuration Options \n\r\n\n");
benkatz 44:8040fa2fcb0d 114 wait_us(10);
benkatz 51:6cd89bd6fcaa 115 printf(" %-4s %-31s %-5s %-6s %-2s\n\r\n\r", "prefix", "parameter", "min", "max", "current value");
benkatz 44:8040fa2fcb0d 116 wait_us(10);
benkatz 28:8c7e29f719c5 117 printf(" %-4s %-31s %-5s %-6s %.1f\n\r", "b", "Current Bandwidth (Hz)", "100", "2000", I_BW);
benkatz 44:8040fa2fcb0d 118 wait_us(10);
benkatz 28:8c7e29f719c5 119 printf(" %-4s %-31s %-5s %-6s %-5i\n\r", "i", "CAN ID", "0", "127", CAN_ID);
benkatz 44:8040fa2fcb0d 120 wait_us(10);
benkatz 28:8c7e29f719c5 121 printf(" %-4s %-31s %-5s %-6s %-5i\n\r", "m", "CAN Master ID", "0", "127", CAN_MASTER);
benkatz 44:8040fa2fcb0d 122 wait_us(10);
benkatz 51:6cd89bd6fcaa 123 printf(" %-4s %-31s %-5s %-6s %.1f\n\r", "l", "Current Limit (A)", "0.0", "40.0", I_MAX);
benkatz 51:6cd89bd6fcaa 124 wait_us(10);
benkatz 51:6cd89bd6fcaa 125 printf(" %-4s %-31s %-5s %-6s %.1f\n\r", "f", "FW Current Limit (A)", "0.0", "33.0", I_FW_MAX);
benkatz 44:8040fa2fcb0d 126 wait_us(10);
benkatz 28:8c7e29f719c5 127 printf(" %-4s %-31s %-5s %-6s %d\n\r", "t", "CAN Timeout (cycles)(0 = none)", "0", "100000", CAN_TIMEOUT);
benkatz 44:8040fa2fcb0d 128 wait_us(10);
benkatz 24:58c2d7571207 129 printf("\n\r To change a value, type 'prefix''value''ENTER'\n\r i.e. 'b1000''ENTER'\n\r\n\r");
benkatz 44:8040fa2fcb0d 130 wait_us(10);
benkatz 24:58c2d7571207 131 state_change = 0;
benkatz 24:58c2d7571207 132 }
benkatz 22:60276ba87ac6 133
benkatz 23:2adf23ee0305 134 void enter_torque_mode(void){
benkatz 44:8040fa2fcb0d 135 drv.enable_gd();
benkatz 47:e1196a851f76 136 //gpio.enable->write(1);
benkatz 37:c0f352d6e8e3 137 controller.ovp_flag = 0;
benkatz 28:8c7e29f719c5 138 reset_foc(&controller); // Tesets integrators, and other control loop parameters
benkatz 28:8c7e29f719c5 139 wait(.001);
benkatz 23:2adf23ee0305 140 controller.i_d_ref = 0;
benkatz 50:ba72df25d10f 141 controller.i_q_ref = 0; // Current Setpoints
benkatz 37:c0f352d6e8e3 142 gpio.led->write(1); // Turn on status LED
benkatz 25:f5741040c4bb 143 state_change = 0;
benkatz 28:8c7e29f719c5 144 printf("\n\r Entering Motor Mode \n\r");
benkatz 23:2adf23ee0305 145 }
benkatz 22:60276ba87ac6 146
benkatz 23:2adf23ee0305 147 void calibrate(void){
benkatz 44:8040fa2fcb0d 148 drv.enable_gd();
benkatz 47:e1196a851f76 149 //gpio.enable->write(1);
benkatz 37:c0f352d6e8e3 150 gpio.led->write(1); // Turn on status LED
benkatz 25:f5741040c4bb 151 order_phases(&spi, &gpio, &controller, &prefs); // Check phase ordering
benkatz 25:f5741040c4bb 152 calibrate(&spi, &gpio, &controller, &prefs); // Perform calibration procedure
benkatz 37:c0f352d6e8e3 153 gpio.led->write(0);; // Turn off status LED
benkatz 23:2adf23ee0305 154 wait(.2);
benkatz 23:2adf23ee0305 155 printf("\n\r Calibration complete. Press 'esc' to return to menu\n\r");
benkatz 44:8040fa2fcb0d 156 drv.disable_gd();
benkatz 47:e1196a851f76 157 //gpio.enable->write(0);
benkatz 23:2adf23ee0305 158 state_change = 0;
benkatz 23:2adf23ee0305 159 }
benkatz 23:2adf23ee0305 160
benkatz 23:2adf23ee0305 161 void print_encoder(void){
benkatz 48:74a40481740c 162 printf(" Mechanical Angle: %f Electrical Angle: %f Raw: %d\n\r", spi.GetMechPosition(), spi.GetElecPosition(), spi.GetRawPosition());
benkatz 48:74a40481740c 163 //printf("%d\n\r", spi.GetRawPosition());
benkatz 47:e1196a851f76 164 wait(.001);
benkatz 22:60276ba87ac6 165 }
benkatz 20:bf9ea5125d52 166
benkatz 23:2adf23ee0305 167 /// Current Sampling Interrupt ///
benkatz 23:2adf23ee0305 168 /// This runs at 40 kHz, regardless of of the mode the controller is in ///
benkatz 2:8724412ad628 169 extern "C" void TIM1_UP_TIM10_IRQHandler(void) {
benkatz 2:8724412ad628 170 if (TIM1->SR & TIM_SR_UIF ) {
benkatz 23:2adf23ee0305 171
benkatz 23:2adf23ee0305 172 ///Sample current always ///
benkatz 25:f5741040c4bb 173 ADC1->CR2 |= 0x40000000; // Begin sample and conversion
benkatz 22:60276ba87ac6 174 //volatile int delay;
benkatz 20:bf9ea5125d52 175 //for (delay = 0; delay < 55; delay++);
benkatz 45:26801179208e 176
benkatz 47:e1196a851f76 177 spi.Sample(DT); // sample position sensor
benkatz 37:c0f352d6e8e3 178 controller.adc2_raw = ADC2->DR; // Read ADC Data Registers
benkatz 23:2adf23ee0305 179 controller.adc1_raw = ADC1->DR;
benkatz 37:c0f352d6e8e3 180 controller.adc3_raw = ADC3->DR;
benkatz 37:c0f352d6e8e3 181 controller.theta_elec = spi.GetElecPosition();
benkatz 37:c0f352d6e8e3 182 controller.theta_mech = (1.0f/GR)*spi.GetMechPosition();
benkatz 37:c0f352d6e8e3 183 controller.dtheta_mech = (1.0f/GR)*spi.GetMechVelocity();
benkatz 37:c0f352d6e8e3 184 controller.dtheta_elec = spi.GetElecVelocity();
benkatz 51:6cd89bd6fcaa 185 controller.v_bus = 0.95f*controller.v_bus + 0.05f*((float)controller.adc3_raw)*V_SCALE; //filter the dc link voltage measurement
benkatz 23:2adf23ee0305 186 ///
benkatz 20:bf9ea5125d52 187
benkatz 23:2adf23ee0305 188 /// Check state machine state, and run the appropriate function ///
benkatz 23:2adf23ee0305 189 switch(state){
benkatz 37:c0f352d6e8e3 190 case REST_MODE: // Do nothing
benkatz 23:2adf23ee0305 191 if(state_change){
benkatz 23:2adf23ee0305 192 enter_menu_state();
benkatz 23:2adf23ee0305 193 }
benkatz 23:2adf23ee0305 194 break;
benkatz 22:60276ba87ac6 195
benkatz 23:2adf23ee0305 196 case CALIBRATION_MODE: // Run encoder calibration procedure
benkatz 23:2adf23ee0305 197 if(state_change){
benkatz 23:2adf23ee0305 198 calibrate();
benkatz 23:2adf23ee0305 199 }
benkatz 23:2adf23ee0305 200 break;
benkatz 23:2adf23ee0305 201
benkatz 26:2b865c00d7e9 202 case MOTOR_MODE: // Run torque control
benkatz 25:f5741040c4bb 203 if(state_change){
benkatz 25:f5741040c4bb 204 enter_torque_mode();
benkatz 28:8c7e29f719c5 205 count = 0;
benkatz 25:f5741040c4bb 206 }
benkatz 28:8c7e29f719c5 207 else{
benkatz 37:c0f352d6e8e3 208 /*
benkatz 37:c0f352d6e8e3 209 if(controller.v_bus>28.0f){ //Turn of gate drive if bus voltage is too high, to prevent FETsplosion if the bus is cut during regen
benkatz 47:e1196a851f76 210 gpio.
benkatz 47:e1196a851f76 211 ->write(0);
benkatz 37:c0f352d6e8e3 212 controller.ovp_flag = 1;
benkatz 37:c0f352d6e8e3 213 state = REST_MODE;
benkatz 37:c0f352d6e8e3 214 state_change = 1;
benkatz 37:c0f352d6e8e3 215 printf("OVP Triggered!\n\r");
benkatz 37:c0f352d6e8e3 216 }
benkatz 37:c0f352d6e8e3 217 */
benkatz 37:c0f352d6e8e3 218
benkatz 28:8c7e29f719c5 219 if((controller.timeout > CAN_TIMEOUT) && (CAN_TIMEOUT > 0)){
benkatz 28:8c7e29f719c5 220 controller.i_d_ref = 0;
benkatz 28:8c7e29f719c5 221 controller.i_q_ref = 0;
benkatz 37:c0f352d6e8e3 222 controller.kp = 0;
benkatz 37:c0f352d6e8e3 223 controller.kd = 0;
benkatz 37:c0f352d6e8e3 224 controller.t_ff = 0;
benkatz 28:8c7e29f719c5 225 }
benkatz 47:e1196a851f76 226
benkatz 50:ba72df25d10f 227 torque_control(&controller);
benkatz 49:83d83040ea51 228 commutate(&controller, &observer, &gpio, controller.theta_elec); // Run current loop
benkatz 49:83d83040ea51 229
benkatz 49:83d83040ea51 230 controller.timeout++;
benkatz 49:83d83040ea51 231 count++;
benkatz 37:c0f352d6e8e3 232
benkatz 37:c0f352d6e8e3 233 }
benkatz 23:2adf23ee0305 234 break;
benkatz 23:2adf23ee0305 235 case SETUP_MODE:
benkatz 23:2adf23ee0305 236 if(state_change){
benkatz 24:58c2d7571207 237 enter_setup_state();
benkatz 23:2adf23ee0305 238 }
benkatz 23:2adf23ee0305 239 break;
benkatz 23:2adf23ee0305 240 case ENCODER_MODE:
benkatz 23:2adf23ee0305 241 print_encoder();
benkatz 23:2adf23ee0305 242 break;
benkatz 37:c0f352d6e8e3 243 }
benkatz 2:8724412ad628 244 }
benkatz 23:2adf23ee0305 245 TIM1->SR = 0x0; // reset the status register
benkatz 2:8724412ad628 246 }
benkatz 0:4e1c4df6aabd 247
benkatz 25:f5741040c4bb 248
benkatz 24:58c2d7571207 249 char cmd_val[8] = {0};
benkatz 24:58c2d7571207 250 char cmd_id = 0;
benkatz 25:f5741040c4bb 251 char char_count = 0;
benkatz 24:58c2d7571207 252
benkatz 25:f5741040c4bb 253 /// Manage state machine with commands from serial terminal or configurator gui ///
benkatz 25:f5741040c4bb 254 /// Called when data received over serial ///
benkatz 23:2adf23ee0305 255 void serial_interrupt(void){
benkatz 23:2adf23ee0305 256 while(pc.readable()){
benkatz 23:2adf23ee0305 257 char c = pc.getc();
benkatz 25:f5741040c4bb 258 if(c == 27){
benkatz 25:f5741040c4bb 259 state = REST_MODE;
benkatz 25:f5741040c4bb 260 state_change = 1;
benkatz 25:f5741040c4bb 261 char_count = 0;
benkatz 25:f5741040c4bb 262 cmd_id = 0;
benkatz 37:c0f352d6e8e3 263 gpio.led->write(0);;
benkatz 25:f5741040c4bb 264 for(int i = 0; i<8; i++){cmd_val[i] = 0;}
benkatz 25:f5741040c4bb 265 }
benkatz 24:58c2d7571207 266 if(state == REST_MODE){
benkatz 23:2adf23ee0305 267 switch (c){
benkatz 23:2adf23ee0305 268 case 'c':
benkatz 23:2adf23ee0305 269 state = CALIBRATION_MODE;
benkatz 23:2adf23ee0305 270 state_change = 1;
benkatz 23:2adf23ee0305 271 break;
benkatz 26:2b865c00d7e9 272 case 'm':
benkatz 26:2b865c00d7e9 273 state = MOTOR_MODE;
benkatz 23:2adf23ee0305 274 state_change = 1;
benkatz 23:2adf23ee0305 275 break;
benkatz 23:2adf23ee0305 276 case 'e':
benkatz 23:2adf23ee0305 277 state = ENCODER_MODE;
benkatz 23:2adf23ee0305 278 state_change = 1;
benkatz 23:2adf23ee0305 279 break;
bdring 52:cf8b2abf811d 280 case 'o': // the own it selection !!!
bdring 52:cf8b2abf811d 281 controller.p_des += 0.1f;
bdring 52:cf8b2abf811d 282 break;
benkatz 23:2adf23ee0305 283 case 's':
benkatz 23:2adf23ee0305 284 state = SETUP_MODE;
benkatz 23:2adf23ee0305 285 state_change = 1;
benkatz 23:2adf23ee0305 286 break;
benkatz 37:c0f352d6e8e3 287 case 'z':
benkatz 37:c0f352d6e8e3 288 spi.SetMechOffset(0);
benkatz 47:e1196a851f76 289 spi.Sample(DT);
benkatz 37:c0f352d6e8e3 290 wait_us(20);
benkatz 37:c0f352d6e8e3 291 M_OFFSET = spi.GetMechPosition();
benkatz 37:c0f352d6e8e3 292 if (!prefs.ready()) prefs.open();
benkatz 37:c0f352d6e8e3 293 prefs.flush(); // Write new prefs to flash
benkatz 37:c0f352d6e8e3 294 prefs.close();
benkatz 37:c0f352d6e8e3 295 prefs.load();
benkatz 37:c0f352d6e8e3 296 spi.SetMechOffset(M_OFFSET);
benkatz 37:c0f352d6e8e3 297 printf("\n\r Saved new zero position: %.4f\n\r\n\r", M_OFFSET);
benkatz 37:c0f352d6e8e3 298
benkatz 37:c0f352d6e8e3 299 break;
benkatz 37:c0f352d6e8e3 300 }
benkatz 37:c0f352d6e8e3 301
benkatz 24:58c2d7571207 302 }
benkatz 24:58c2d7571207 303 else if(state == SETUP_MODE){
benkatz 25:f5741040c4bb 304 if(c == 13){
benkatz 24:58c2d7571207 305 switch (cmd_id){
benkatz 24:58c2d7571207 306 case 'b':
benkatz 24:58c2d7571207 307 I_BW = fmaxf(fminf(atof(cmd_val), 2000.0f), 100.0f);
benkatz 24:58c2d7571207 308 break;
benkatz 24:58c2d7571207 309 case 'i':
benkatz 24:58c2d7571207 310 CAN_ID = atoi(cmd_val);
benkatz 24:58c2d7571207 311 break;
benkatz 26:2b865c00d7e9 312 case 'm':
benkatz 26:2b865c00d7e9 313 CAN_MASTER = atoi(cmd_val);
benkatz 26:2b865c00d7e9 314 break;
benkatz 24:58c2d7571207 315 case 'l':
benkatz 51:6cd89bd6fcaa 316 I_MAX = fmaxf(fminf(atof(cmd_val), 40.0f), 0.0f);
benkatz 51:6cd89bd6fcaa 317 break;
benkatz 51:6cd89bd6fcaa 318 case 'f':
benkatz 51:6cd89bd6fcaa 319 I_FW_MAX = fmaxf(fminf(atof(cmd_val), 33.0f), 0.0f);
benkatz 24:58c2d7571207 320 break;
benkatz 28:8c7e29f719c5 321 case 't':
benkatz 28:8c7e29f719c5 322 CAN_TIMEOUT = atoi(cmd_val);
benkatz 28:8c7e29f719c5 323 break;
benkatz 24:58c2d7571207 324 default:
benkatz 24:58c2d7571207 325 printf("\n\r '%c' Not a valid command prefix\n\r\n\r", cmd_id);
benkatz 24:58c2d7571207 326 break;
benkatz 24:58c2d7571207 327 }
benkatz 24:58c2d7571207 328
benkatz 24:58c2d7571207 329 if (!prefs.ready()) prefs.open();
benkatz 24:58c2d7571207 330 prefs.flush(); // Write new prefs to flash
benkatz 24:58c2d7571207 331 prefs.close();
benkatz 24:58c2d7571207 332 prefs.load();
benkatz 24:58c2d7571207 333 state_change = 1;
benkatz 24:58c2d7571207 334 char_count = 0;
benkatz 24:58c2d7571207 335 cmd_id = 0;
benkatz 24:58c2d7571207 336 for(int i = 0; i<8; i++){cmd_val[i] = 0;}
benkatz 24:58c2d7571207 337 }
benkatz 24:58c2d7571207 338 else{
benkatz 24:58c2d7571207 339 if(char_count == 0){cmd_id = c;}
benkatz 24:58c2d7571207 340 else{
benkatz 24:58c2d7571207 341 cmd_val[char_count-1] = c;
benkatz 24:58c2d7571207 342
benkatz 24:58c2d7571207 343 }
benkatz 24:58c2d7571207 344 pc.putc(c);
benkatz 24:58c2d7571207 345 char_count++;
benkatz 23:2adf23ee0305 346 }
benkatz 23:2adf23ee0305 347 }
benkatz 24:58c2d7571207 348 else if (state == ENCODER_MODE){
benkatz 24:58c2d7571207 349 switch (c){
benkatz 24:58c2d7571207 350 case 27:
benkatz 24:58c2d7571207 351 state = REST_MODE;
benkatz 24:58c2d7571207 352 state_change = 1;
benkatz 24:58c2d7571207 353 break;
benkatz 24:58c2d7571207 354 }
benkatz 24:58c2d7571207 355 }
benkatz 49:83d83040ea51 356 else if (state == MOTOR_MODE){
benkatz 49:83d83040ea51 357 switch (c){
benkatz 49:83d83040ea51 358 case 'd':
benkatz 49:83d83040ea51 359 controller.i_q_ref = 0;
benkatz 49:83d83040ea51 360 controller.i_d_ref = 0;
benkatz 49:83d83040ea51 361 }
benkatz 49:83d83040ea51 362 }
benkatz 24:58c2d7571207 363
benkatz 24:58c2d7571207 364 }
benkatz 22:60276ba87ac6 365 }
benkatz 0:4e1c4df6aabd 366
benkatz 0:4e1c4df6aabd 367 int main() {
benkatz 20:bf9ea5125d52 368 controller.v_bus = V_BUS;
benkatz 22:60276ba87ac6 369 controller.mode = 0;
benkatz 23:2adf23ee0305 370 Init_All_HW(&gpio); // Setup PWM, ADC, GPIO
benkatz 44:8040fa2fcb0d 371 wait(.1);
benkatz 44:8040fa2fcb0d 372
benkatz 44:8040fa2fcb0d 373 gpio.enable->write(1);
benkatz 44:8040fa2fcb0d 374 wait_us(100);
benkatz 45:26801179208e 375 drv.calibrate();
benkatz 45:26801179208e 376 wait_us(100);
benkatz 44:8040fa2fcb0d 377 drv.write_DCR(0x0, 0x0, 0x0, PWM_MODE_3X, 0x0, 0x0, 0x0, 0x0, 0x1);
benkatz 44:8040fa2fcb0d 378 wait_us(100);
benkatz 46:2d4b1dafcfe3 379 drv.write_CSACR(0x0, 0x1, 0x0, CSA_GAIN_40, 0x0, 0x0, 0x0, 0x0, SEN_LVL_1_0);
benkatz 44:8040fa2fcb0d 380 wait_us(100);
benkatz 49:83d83040ea51 381 drv.write_OCPCR(TRETRY_4MS, DEADTIME_200NS, OCP_RETRY, OCP_DEG_8US, VDS_LVL_1_88);
benkatz 45:26801179208e 382
benkatz 45:26801179208e 383 //drv.enable_gd();
benkatz 44:8040fa2fcb0d 384 zero_current(&controller.adc1_offset, &controller.adc2_offset); // Measure current sensor zero-offset
benkatz 47:e1196a851f76 385 drv.disable_gd();
benkatz 20:bf9ea5125d52 386
benkatz 9:d7eb815cb057 387 wait(.1);
benkatz 44:8040fa2fcb0d 388 /*
benkatz 26:2b865c00d7e9 389 gpio.enable->write(1);
benkatz 26:2b865c00d7e9 390 TIM1->CCR3 = 0x708*(1.0f); // Write duty cycles
benkatz 26:2b865c00d7e9 391 TIM1->CCR2 = 0x708*(1.0f);
benkatz 26:2b865c00d7e9 392 TIM1->CCR1 = 0x708*(1.0f);
benkatz 26:2b865c00d7e9 393 gpio.enable->write(0);
benkatz 44:8040fa2fcb0d 394 */
benkatz 23:2adf23ee0305 395 reset_foc(&controller); // Reset current controller
benkatz 48:74a40481740c 396 reset_observer(&observer); // Reset observer
benkatz 26:2b865c00d7e9 397 TIM1->CR1 ^= TIM_CR1_UDIS;
benkatz 26:2b865c00d7e9 398 //TIM1->CR1 |= TIM_CR1_UDIS; //enable interrupt
benkatz 20:bf9ea5125d52 399
benkatz 20:bf9ea5125d52 400 wait(.1);
benkatz 37:c0f352d6e8e3 401 NVIC_SetPriority(TIM1_UP_TIM10_IRQn, 2); // commutation > communication
benkatz 43:dfb72608639c 402
benkatz 37:c0f352d6e8e3 403 NVIC_SetPriority(CAN1_RX0_IRQn, 3);
benkatz 26:2b865c00d7e9 404 can.filter(CAN_ID<<21, 0xFFE00004, CANStandard, 0);
benkatz 43:dfb72608639c 405
benkatz 28:8c7e29f719c5 406 txMsg.id = CAN_MASTER;
benkatz 28:8c7e29f719c5 407 txMsg.len = 6;
benkatz 26:2b865c00d7e9 408 rxMsg.len = 8;
benkatz 43:dfb72608639c 409 can.attach(&onMsgReceived); // attach 'CAN receive-complete' interrupt handler
benkatz 23:2adf23ee0305 410
benkatz 48:74a40481740c 411 // If preferences haven't been user configured yet, set defaults
benkatz 25:f5741040c4bb 412 prefs.load(); // Read flash
benkatz 37:c0f352d6e8e3 413 if(isnan(E_OFFSET)){E_OFFSET = 0.0f;}
benkatz 37:c0f352d6e8e3 414 if(isnan(M_OFFSET)){M_OFFSET = 0.0f;}
benkatz 48:74a40481740c 415 if(isnan(I_BW) || I_BW==-1){I_BW = 1000;}
benkatz 51:6cd89bd6fcaa 416 if(isnan(I_MAX) || I_MAX ==-1){I_MAX=40;}
benkatz 51:6cd89bd6fcaa 417 if(isnan(I_FW_MAX) || I_FW_MAX ==-1){I_FW_MAX=0;}
benkatz 48:74a40481740c 418 if(isnan(CAN_ID) || CAN_ID==-1){CAN_ID = 1;}
benkatz 48:74a40481740c 419 if(isnan(CAN_MASTER) || CAN_MASTER==-1){CAN_MASTER = 0;}
benkatz 48:74a40481740c 420 if(isnan(CAN_TIMEOUT) || CAN_TIMEOUT==-1){CAN_TIMEOUT = 0;}
benkatz 25:f5741040c4bb 421 spi.SetElecOffset(E_OFFSET); // Set position sensor offset
benkatz 37:c0f352d6e8e3 422 spi.SetMechOffset(M_OFFSET);
benkatz 23:2adf23ee0305 423 int lut[128] = {0};
benkatz 23:2adf23ee0305 424 memcpy(&lut, &ENCODER_LUT, sizeof(lut));
benkatz 25:f5741040c4bb 425 spi.WriteLUT(lut); // Set potision sensor nonlinearity lookup table
benkatz 45:26801179208e 426 init_controller_params(&controller);
benkatz 45:26801179208e 427
benkatz 26:2b865c00d7e9 428 pc.baud(921600); // set serial baud rate
bdring 52:cf8b2abf811d 429 wait_us(100);
bdring 52:cf8b2abf811d 430 pc.printf("\n\r\n\r Hobby King Cheetah\n\r\n\r");
bdring 52:cf8b2abf811d 431 wait_us(10);
benkatz 23:2adf23ee0305 432 printf("\n\r Debug Info:\n\r");
benkatz 32:ccac5da77844 433 printf(" Firmware Version: %s\n\r", VERSION_NUM);
benkatz 23:2adf23ee0305 434 printf(" ADC1 Offset: %d ADC2 Offset: %d\n\r", controller.adc1_offset, controller.adc2_offset);
benkatz 23:2adf23ee0305 435 printf(" Position Sensor Electrical Offset: %.4f\n\r", E_OFFSET);
benkatz 37:c0f352d6e8e3 436 printf(" Output Zero Position: %.4f\n\r", M_OFFSET);
bdring 52:cf8b2abf811d 437 printf(" Gear Ratio %.4f:1\r\n", GR);
bdring 52:cf8b2abf811d 438 printf(" Mapped Position %.4f to %.4f Radians\n\r", P_MIN, P_MAX);
benkatz 24:58c2d7571207 439 printf(" CAN ID: %d\n\r", CAN_ID);
benkatz 44:8040fa2fcb0d 440
benkatz 44:8040fa2fcb0d 441
benkatz 44:8040fa2fcb0d 442
benkatz 44:8040fa2fcb0d 443
benkatz 47:e1196a851f76 444 //printf(" %d\n\r", drv.read_register(DCR));
benkatz 47:e1196a851f76 445 //wait_us(100);
benkatz 47:e1196a851f76 446 //printf(" %d\n\r", drv.read_register(CSACR));
benkatz 47:e1196a851f76 447 //wait_us(100);
benkatz 47:e1196a851f76 448 //printf(" %d\n\r", drv.read_register(OCPCR));
benkatz 47:e1196a851f76 449 //drv.disable_gd();
benkatz 44:8040fa2fcb0d 450
benkatz 23:2adf23ee0305 451 pc.attach(&serial_interrupt); // attach serial interrupt
benkatz 22:60276ba87ac6 452
benkatz 23:2adf23ee0305 453 state_change = 1;
benkatz 50:ba72df25d10f 454
benkatz 20:bf9ea5125d52 455
benkatz 44:8040fa2fcb0d 456 int counter = 0;
benkatz 0:4e1c4df6aabd 457 while(1) {
benkatz 47:e1196a851f76 458 drv.print_faults();
benkatz 50:ba72df25d10f 459 wait(.1);
benkatz 48:74a40481740c 460 //printf("%.4f\n\r", controller.v_bus);
benkatz 50:ba72df25d10f 461 /*
benkatz 47:e1196a851f76 462 if(state == MOTOR_MODE)
benkatz 47:e1196a851f76 463 {
benkatz 48:74a40481740c 464 //printf("%.3f %.3f %.3f\n\r", (float)observer.temperature, (float)observer.temperature2, observer.resistance);
benkatz 49:83d83040ea51 465 //printf("%.3f %.3f %.3f %.3f %.3f\n\r", controller.v_d, controller.v_q, controller.i_d_filt, controller.i_q_filt, controller.dtheta_elec);
benkatz 49:83d83040ea51 466 //printf("%.3f\n\r", controller.dtheta_mech);
benkatz 49:83d83040ea51 467 wait(.002);
benkatz 47:e1196a851f76 468 }
benkatz 50:ba72df25d10f 469 */
benkatz 47:e1196a851f76 470
benkatz 0:4e1c4df6aabd 471 }
benkatz 0:4e1c4df6aabd 472 }