Revision 1:ab906ac6e90b, committed 2014-01-09

Comitter:

anhnt2407

Date:

Thu Jan 09 10:16:51 2014 +0000

Parent:

0:df9baf6459b7

Commit message:

TSL2561(updated)

Changed in this revision

diff -r df9baf6459b7 -r ab906ac6e90b TSL2561.cpp
--- a/TSL2561.cpp	Tue Sep 10 15:13:49 2013 +0000
+++ b/TSL2561.cpp	Thu Jan 09 10:16:51 2014 +0000
@@ -1,5 +1,7 @@
 
 #include "TSL2561.h"
+#include "mbed.h"
+
 Serial DEBUG(USBTX, USBRX);
 
 #define DEBUG_PRINTX(z,x)             if(z==1) DEBUG.printf(x);
@@ -9,7 +11,7 @@
 
 TSL2561::TSL2561():i2c(TSL2561_I2C_PINNAME_SDA,TSL2561_I2C_PINNAME_SCL){
     i2c.frequency (300);
-    _addr = TSL2561_ADDR_FLOAT<<1;
+    _addr = TSL2561_ADDR_FLOAT;
     _initialized = false;
     _integration = TSL2561_INTEGRATIONTIME_13MS;
     _gain = TSL2561_GAIN_16X;    
@@ -17,7 +19,7 @@
 
 TSL2561::TSL2561(uint8_t addr):i2c(TSL2561_I2C_PINNAME_SDA,TSL2561_I2C_PINNAME_SCL) {
 
-  _addr = addr<<1;
+  _addr = addr;
   _initialized = false;
   _integration = TSL2561_INTEGRATIONTIME_13MS;
   _gain = TSL2561_GAIN_16X;
@@ -26,7 +28,7 @@
 
 TSL2561::TSL2561(PinName sda, PinName scl):i2c(sda, scl) {
 
-  _addr = TSL2561_ADDR_FLOAT<<1;
+  _addr = TSL2561_ADDR_FLOAT;
   _initialized = false;
   _integration = TSL2561_INTEGRATIONTIME_13MS;
   _gain = TSL2561_GAIN_16X;
@@ -35,7 +37,7 @@
 
 TSL2561::TSL2561(PinName sda, PinName scl, uint8_t addr):i2c(sda, scl) {
 
-  _addr = addr<<1;
+  _addr = addr;
   _initialized = false;
   _integration = TSL2561_INTEGRATIONTIME_13MS;
   _gain = TSL2561_GAIN_16X;
@@ -57,7 +59,7 @@
   } else if (channel == 2) {
     // Reads all and subtracts out just the visible!
     
-    return ( (x & 0xFFFF) - (x >> 16));
+    return ( (x & 0xFFFF) - (x >> 16) );
   }
   
   // unknown channel!
@@ -85,19 +87,19 @@
       break;
   }
 
-DEBUG_PRINTLNXY(1," Integration:= %d",_integration);
+//DEBUG_PRINTLNXY(0," Integration:= %d",_integration);
 
   uint32_t x;
   x = read16(TSL2561_COMMAND_BIT | TSL2561_WORD_BIT | TSL2561_REGISTER_CHAN1_LOW);
   
-  DEBUG_PRINTLNXY(1," x:= %d",x);
+ // DEBUG_PRINTLNXY(0," x:= %d",x);
   
   x <<= 16;
   x |= read16(TSL2561_COMMAND_BIT | TSL2561_WORD_BIT | TSL2561_REGISTER_CHAN0_LOW);
 
-  DEBUG_PRINTLNXY(1," x:= %d",x);
+  //DEBUG_PRINTLNXY(0," x:= %d",x);
   
-    wait(3);
+    //wait(3);
   disable();
 
   return x;
@@ -106,20 +108,16 @@
 
 bool TSL2561::begin(void) {
 
-    char reg = TSL2561_REGISTER_ID;
-    char read;
-    
-    i2c.start();
-    i2c.write(_addr);
-    i2c.write(reg);
-    
-    //i2c.start();
-    //i2c.write(reg);
-    read = i2c.read(1);    
-    i2c.stop();   
-    
+    char  reg[1];
+    reg[0] = TSL2561_REGISTER_ID;
+    char receivedata[1];
+    char read;    
+    i2c.write(_addr<<1, reg, 1);
+    i2c.read(_addr<<1, receivedata, 1);
+    read=receivedata[0];
+            
   if (read & 0x0A ) {
-    DEBUG_PRINTLNXY(1,"Read 0x%x => Found TSL2561",read);
+    DEBUG_PRINTLNXY(0,"Read 0x%x => Found TSL2561",read);
   } else {
     return false;
   } 
@@ -137,35 +135,37 @@
  
  uint16_t TSL2561::read16(uint8_t reg)
 {
-    uint16_t x; uint16_t t;
-    char _x;char _t;char r[1];
+    uint16_t x; 
+    uint16_t t;
+    char _x;
+    char _t;
+    char r[1];
     r[0] = reg;
- 
-    i2c.start();
-    i2c.write(_addr);
-    i2c.write(reg);
+    char receivedata[2];
     
-    //i2c.start();
-    //i2c.write(reg);
-    _t = i2c.read(1);
-    _x = i2c.read(1);
+    i2c.write(_addr<<1, r, 1);
+    i2c.read(_addr<<1, receivedata, 2);  
+    
+    _t=receivedata[0];
+    _x=receivedata[1];
     
-    DEBUG_PRINTLNXY(0,"%x",_x);
-    DEBUG_PRINTLNXY(0,"%x",_t);
-    
-    i2c.stop();
+    DEBUG_PRINTLNXY(0,"_t:=0x%x",_t);
+    DEBUG_PRINTLNXY(0,"_x:=0x%x",_x);      
    
-    t=(uint16_t)&_t;
-    x=(uint16_t)&_x;
+    t=(uint16_t)_t;
+    x=(uint16_t)_x;
     x <<= 8;
     x |= t;
+    
+    DEBUG_PRINTLNXY(0,"x:= %d",x);      
+    
     return x;
 }
  
  void TSL2561::write8 (uint8_t reg, uint8_t value)
 { 
     i2c.start();
-    i2c.write(_addr);
+    i2c.write(_addr<<1);
     i2c.write(reg);
     i2c.write(value);
     i2c.stop(); 
@@ -175,45 +175,45 @@
 
 if (!_initialized) begin();
 
-else DEBUG_PRINTLNX(1,"--------------Set Timing---------");
+else DEBUG_PRINTLNX(0,"--------------Set Timing---------");
 
   enable();
   
   _integration = integration;
   
-  DEBUG_PRINTLNXY(1,"Integration: 0x%x",_integration);
-  DEBUG_PRINTLNXY(1,"Gain: 0x%x",_gain);
-  DEBUG_PRINTLNXY(1,"Integration | Gain: 0x%x",_integration | _gain);
+  DEBUG_PRINTLNXY(0,"Integration: 0x%x",_integration);
+  DEBUG_PRINTLNXY(0,"Gain: 0x%x",_gain);
+  DEBUG_PRINTLNXY(0,"Integration | Gain: 0x%x",_integration | _gain);
   
   write8(TSL2561_COMMAND_BIT | TSL2561_REGISTER_TIMING, _integration | _gain);  
   
   disable();
   
-  DEBUG_PRINTLNX(1,"--------------Complete Set Timing-------------");
+  DEBUG_PRINTLNX(0,"--------------Complete Set Timing-------------");
   
-  wait(1);
+  //wait(1);
 
 }
 
 void TSL2561::setGain(tsl2561Gain_t gain) {
 
 if (!_initialized) begin();
-else    DEBUG_PRINTLNX(1,"-------------Set Gain--------------");
+else    DEBUG_PRINTLNX(0,"-------------Set Gain--------------");
 
 
   enable();
   
-  DEBUG_PRINTLNXY(1,"Intergration: 0x%x",_integration);
-  DEBUG_PRINTLNXY(1,"Gain: 0x%x",_gain);
-  DEBUG_PRINTLNXY(1,"Intergration | Gain: 0x%x",_integration | _gain);
+  DEBUG_PRINTLNXY(0,"Intergration: 0x%x",_integration);
+  DEBUG_PRINTLNXY(0,"Gain: 0x%x",_gain);
+  DEBUG_PRINTLNXY(0,"Intergration | Gain: 0x%x",_integration | _gain);
   
   _gain = gain;
   write8(TSL2561_COMMAND_BIT | TSL2561_REGISTER_TIMING, _integration | _gain);  
   //write8(TSL2561_COMMAND_BIT | TSL2561_REGISTER_TIMING,  _gain);  
   disable();
   
-  DEBUG_PRINTLNX(1,"---------------Complete Set Gain----------------");
-  wait(1);
+  DEBUG_PRINTLNX(0,"---------------Complete Set Gain----------------");
+  //wait(1);
   
 }
 
@@ -222,7 +222,7 @@
   if (!_initialized) begin();
 
   // Enable the device by setting the control bit to 0x03
-  DEBUG_PRINTLNX(1," Power On");
+  DEBUG_PRINTLNX(0," Power On");
   write8(TSL2561_COMMAND_BIT | TSL2561_REGISTER_CONTROL, TSL2561_CONTROL_POWERON);
 }
 
@@ -231,6 +231,6 @@
   if (!_initialized) begin();
 
   // Disable the device by setting the control bit to 0x03
-  DEBUG_PRINTLNX(1," Power Off");
+  DEBUG_PRINTLNX(0," Power Off");
   write8(TSL2561_COMMAND_BIT | TSL2561_REGISTER_CONTROL, TSL2561_CONTROL_POWEROFF);
 }
\ No newline at end of file