add "LE Device Address" 0x1B to advertising data types

Fork of BLE_API by Bluetooth Low Energy

Committer:
rgrover1
Date:
Wed Dec 02 12:57:28 2015 +0000
Revision:
1008:c27e0c6f1f38
Parent:
1006:76ae9bbf173f
Child:
1017:ccb8c0646e55
Synchronized with git rev 13bf70b6
Author: Rohit Grover
Release 2.1.5
=============

A minor release to separate the concept of minlen and len in
GattCharacteristic. Also contains some improvements to documentation.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 980:07ce7d9ed5ff 1 # Doxyfile 1.8.4
rgrover1 980:07ce7d9ed5ff 2
rgrover1 980:07ce7d9ed5ff 3 # This file describes the settings to be used by the documentation system
rgrover1 980:07ce7d9ed5ff 4 # doxygen (www.doxygen.org) for a project.
rgrover1 980:07ce7d9ed5ff 5 #
rgrover1 980:07ce7d9ed5ff 6 # All text after a double hash (##) is considered a comment and is placed
rgrover1 980:07ce7d9ed5ff 7 # in front of the TAG it is preceding .
rgrover1 980:07ce7d9ed5ff 8 # All text after a hash (#) is considered a comment and will be ignored.
rgrover1 980:07ce7d9ed5ff 9 # The format is:
rgrover1 980:07ce7d9ed5ff 10 # TAG = value [value, ...]
rgrover1 980:07ce7d9ed5ff 11 # For lists items can also be appended using:
rgrover1 980:07ce7d9ed5ff 12 # TAG += value [value, ...]
rgrover1 980:07ce7d9ed5ff 13 # Values that contain spaces should be placed between quotes (" ").
rgrover1 980:07ce7d9ed5ff 14
rgrover1 980:07ce7d9ed5ff 15 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 16 # Project related configuration options
rgrover1 980:07ce7d9ed5ff 17 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 18
rgrover1 980:07ce7d9ed5ff 19 # This tag specifies the encoding used for all characters in the config file
rgrover1 980:07ce7d9ed5ff 20 # that follow. The default is UTF-8 which is also the encoding used for all
rgrover1 980:07ce7d9ed5ff 21 # text before the first occurrence of this tag. Doxygen uses libiconv (or the
rgrover1 980:07ce7d9ed5ff 22 # iconv built into libc) for the transcoding. See
rgrover1 980:07ce7d9ed5ff 23 # http://www.gnu.org/software/libiconv for the list of possible encodings.
rgrover1 980:07ce7d9ed5ff 24
rgrover1 980:07ce7d9ed5ff 25 DOXYFILE_ENCODING = UTF-8
rgrover1 980:07ce7d9ed5ff 26
rgrover1 980:07ce7d9ed5ff 27 # The PROJECT_NAME tag is a single word (or sequence of words) that should
rgrover1 980:07ce7d9ed5ff 28 # identify the project. Note that if you do not use Doxywizard you need
rgrover1 980:07ce7d9ed5ff 29 # to put quotes around the project name if it contains spaces.
rgrover1 980:07ce7d9ed5ff 30
rgrover1 980:07ce7d9ed5ff 31 PROJECT_NAME = "BLE API"
rgrover1 980:07ce7d9ed5ff 32
rgrover1 980:07ce7d9ed5ff 33 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
rgrover1 980:07ce7d9ed5ff 34 # This could be handy for archiving the generated documentation or
rgrover1 980:07ce7d9ed5ff 35 # if some version control system is used.
rgrover1 980:07ce7d9ed5ff 36
rgrover1 980:07ce7d9ed5ff 37 PROJECT_NUMBER = v2
rgrover1 980:07ce7d9ed5ff 38
rgrover1 980:07ce7d9ed5ff 39 # Using the PROJECT_BRIEF tag one can provide an optional one line description
rgrover1 980:07ce7d9ed5ff 40 # for a project that appears at the top of each page and should give viewer
rgrover1 980:07ce7d9ed5ff 41 # a quick idea about the purpose of the project. Keep the description short.
rgrover1 980:07ce7d9ed5ff 42
rgrover1 980:07ce7d9ed5ff 43 PROJECT_BRIEF = "An abstraction for using Bluetooth Low Energy."
rgrover1 980:07ce7d9ed5ff 44
rgrover1 980:07ce7d9ed5ff 45 # With the PROJECT_LOGO tag one can specify an logo or icon that is
rgrover1 980:07ce7d9ed5ff 46 # included in the documentation. The maximum height of the logo should not
rgrover1 980:07ce7d9ed5ff 47 # exceed 55 pixels and the maximum width should not exceed 200 pixels.
rgrover1 980:07ce7d9ed5ff 48 # Doxygen will copy the logo to the output directory.
rgrover1 980:07ce7d9ed5ff 49
rgrover1 980:07ce7d9ed5ff 50 PROJECT_LOGO =
rgrover1 980:07ce7d9ed5ff 51
rgrover1 980:07ce7d9ed5ff 52 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
rgrover1 980:07ce7d9ed5ff 53 # base path where the generated documentation will be put.
rgrover1 980:07ce7d9ed5ff 54 # If a relative path is entered, it will be relative to the location
rgrover1 980:07ce7d9ed5ff 55 # where doxygen was started. If left blank the current directory will be used.
rgrover1 980:07ce7d9ed5ff 56
rgrover1 980:07ce7d9ed5ff 57 OUTPUT_DIRECTORY = apidoc/
rgrover1 980:07ce7d9ed5ff 58
rgrover1 980:07ce7d9ed5ff 59 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
rgrover1 980:07ce7d9ed5ff 60 # 4096 sub-directories (in 2 levels) under the output directory of each output
rgrover1 980:07ce7d9ed5ff 61 # format and will distribute the generated files over these directories.
rgrover1 980:07ce7d9ed5ff 62 # Enabling this option can be useful when feeding doxygen a huge amount of
rgrover1 980:07ce7d9ed5ff 63 # source files, where putting all generated files in the same directory would
rgrover1 980:07ce7d9ed5ff 64 # otherwise cause performance problems for the file system.
rgrover1 980:07ce7d9ed5ff 65
rgrover1 980:07ce7d9ed5ff 66 CREATE_SUBDIRS = NO
rgrover1 980:07ce7d9ed5ff 67
rgrover1 980:07ce7d9ed5ff 68 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
rgrover1 980:07ce7d9ed5ff 69 # documentation generated by doxygen is written. Doxygen will use this
rgrover1 980:07ce7d9ed5ff 70 # information to generate all constant output in the proper language.
rgrover1 980:07ce7d9ed5ff 71 # The default language is English, other supported languages are:
rgrover1 980:07ce7d9ed5ff 72 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
rgrover1 980:07ce7d9ed5ff 73 # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
rgrover1 980:07ce7d9ed5ff 74 # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
rgrover1 980:07ce7d9ed5ff 75 # messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian,
rgrover1 980:07ce7d9ed5ff 76 # Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic,
rgrover1 980:07ce7d9ed5ff 77 # Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
rgrover1 980:07ce7d9ed5ff 78
rgrover1 980:07ce7d9ed5ff 79 OUTPUT_LANGUAGE = English
rgrover1 980:07ce7d9ed5ff 80
rgrover1 980:07ce7d9ed5ff 81 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 82 # include brief member descriptions after the members that are listed in
rgrover1 980:07ce7d9ed5ff 83 # the file and class documentation (similar to JavaDoc).
rgrover1 980:07ce7d9ed5ff 84 # Set to NO to disable this.
rgrover1 980:07ce7d9ed5ff 85
rgrover1 980:07ce7d9ed5ff 86 BRIEF_MEMBER_DESC = YES
rgrover1 980:07ce7d9ed5ff 87
rgrover1 980:07ce7d9ed5ff 88 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
rgrover1 980:07ce7d9ed5ff 89 # the brief description of a member or function before the detailed description.
rgrover1 980:07ce7d9ed5ff 90 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
rgrover1 980:07ce7d9ed5ff 91 # brief descriptions will be completely suppressed.
rgrover1 980:07ce7d9ed5ff 92
rgrover1 980:07ce7d9ed5ff 93 REPEAT_BRIEF = YES
rgrover1 980:07ce7d9ed5ff 94
rgrover1 980:07ce7d9ed5ff 95 # This tag implements a quasi-intelligent brief description abbreviator
rgrover1 980:07ce7d9ed5ff 96 # that is used to form the text in various listings. Each string
rgrover1 980:07ce7d9ed5ff 97 # in this list, if found as the leading text of the brief description, will be
rgrover1 980:07ce7d9ed5ff 98 # stripped from the text and the result after processing the whole list, is
rgrover1 980:07ce7d9ed5ff 99 # used as the annotated text. Otherwise, the brief description is used as-is.
rgrover1 980:07ce7d9ed5ff 100 # If left blank, the following values are used ("$name" is automatically
rgrover1 980:07ce7d9ed5ff 101 # replaced with the name of the entity): "The $name class" "The $name widget"
rgrover1 980:07ce7d9ed5ff 102 # "The $name file" "is" "provides" "specifies" "contains"
rgrover1 980:07ce7d9ed5ff 103 # "represents" "a" "an" "the"
rgrover1 980:07ce7d9ed5ff 104
rgrover1 980:07ce7d9ed5ff 105 ABBREVIATE_BRIEF = "The $name class" \
rgrover1 980:07ce7d9ed5ff 106 "The $name widget" \
rgrover1 980:07ce7d9ed5ff 107 "The $name file" \
rgrover1 980:07ce7d9ed5ff 108 is \
rgrover1 980:07ce7d9ed5ff 109 provides \
rgrover1 980:07ce7d9ed5ff 110 specifies \
rgrover1 980:07ce7d9ed5ff 111 contains \
rgrover1 980:07ce7d9ed5ff 112 represents \
rgrover1 980:07ce7d9ed5ff 113 a \
rgrover1 980:07ce7d9ed5ff 114 an \
rgrover1 980:07ce7d9ed5ff 115 the
rgrover1 980:07ce7d9ed5ff 116
rgrover1 980:07ce7d9ed5ff 117 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
rgrover1 980:07ce7d9ed5ff 118 # Doxygen will generate a detailed section even if there is only a brief
rgrover1 980:07ce7d9ed5ff 119 # description.
rgrover1 980:07ce7d9ed5ff 120
rgrover1 980:07ce7d9ed5ff 121 ALWAYS_DETAILED_SEC = NO
rgrover1 980:07ce7d9ed5ff 122
rgrover1 980:07ce7d9ed5ff 123 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
rgrover1 980:07ce7d9ed5ff 124 # inherited members of a class in the documentation of that class as if those
rgrover1 980:07ce7d9ed5ff 125 # members were ordinary class members. Constructors, destructors and assignment
rgrover1 980:07ce7d9ed5ff 126 # operators of the base classes will not be shown.
rgrover1 980:07ce7d9ed5ff 127
rgrover1 980:07ce7d9ed5ff 128 INLINE_INHERITED_MEMB = NO
rgrover1 980:07ce7d9ed5ff 129
rgrover1 980:07ce7d9ed5ff 130 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
rgrover1 980:07ce7d9ed5ff 131 # path before files name in the file list and in the header files. If set
rgrover1 980:07ce7d9ed5ff 132 # to NO the shortest path that makes the file name unique will be used.
rgrover1 980:07ce7d9ed5ff 133
rgrover1 980:07ce7d9ed5ff 134 FULL_PATH_NAMES = NO
rgrover1 980:07ce7d9ed5ff 135
rgrover1 980:07ce7d9ed5ff 136 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
rgrover1 980:07ce7d9ed5ff 137 # can be used to strip a user-defined part of the path. Stripping is
rgrover1 980:07ce7d9ed5ff 138 # only done if one of the specified strings matches the left-hand part of
rgrover1 980:07ce7d9ed5ff 139 # the path. The tag can be used to show relative paths in the file list.
rgrover1 980:07ce7d9ed5ff 140 # If left blank the directory from which doxygen is run is used as the
rgrover1 980:07ce7d9ed5ff 141 # path to strip. Note that you specify absolute paths here, but also
rgrover1 980:07ce7d9ed5ff 142 # relative paths, which will be relative from the directory where doxygen is
rgrover1 980:07ce7d9ed5ff 143 # started.
rgrover1 980:07ce7d9ed5ff 144
rgrover1 980:07ce7d9ed5ff 145 STRIP_FROM_PATH =
rgrover1 980:07ce7d9ed5ff 146
rgrover1 980:07ce7d9ed5ff 147 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
rgrover1 980:07ce7d9ed5ff 148 # the path mentioned in the documentation of a class, which tells
rgrover1 980:07ce7d9ed5ff 149 # the reader which header file to include in order to use a class.
rgrover1 980:07ce7d9ed5ff 150 # If left blank only the name of the header file containing the class
rgrover1 980:07ce7d9ed5ff 151 # definition is used. Otherwise one should specify the include paths that
rgrover1 980:07ce7d9ed5ff 152 # are normally passed to the compiler using the -I flag.
rgrover1 980:07ce7d9ed5ff 153
rgrover1 980:07ce7d9ed5ff 154 STRIP_FROM_INC_PATH =
rgrover1 980:07ce7d9ed5ff 155
rgrover1 980:07ce7d9ed5ff 156 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
rgrover1 980:07ce7d9ed5ff 157 # (but less readable) file names. This can be useful if your file system
rgrover1 980:07ce7d9ed5ff 158 # doesn't support long names like on DOS, Mac, or CD-ROM.
rgrover1 980:07ce7d9ed5ff 159
rgrover1 980:07ce7d9ed5ff 160 SHORT_NAMES = NO
rgrover1 980:07ce7d9ed5ff 161
rgrover1 980:07ce7d9ed5ff 162 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
rgrover1 980:07ce7d9ed5ff 163 # will interpret the first line (until the first dot) of a JavaDoc-style
rgrover1 980:07ce7d9ed5ff 164 # comment as the brief description. If set to NO, the JavaDoc
rgrover1 980:07ce7d9ed5ff 165 # comments will behave just like regular Qt-style comments
rgrover1 980:07ce7d9ed5ff 166 # (thus requiring an explicit @brief command for a brief description.)
rgrover1 980:07ce7d9ed5ff 167
rgrover1 980:07ce7d9ed5ff 168 JAVADOC_AUTOBRIEF = YES
rgrover1 980:07ce7d9ed5ff 169
rgrover1 980:07ce7d9ed5ff 170 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
rgrover1 980:07ce7d9ed5ff 171 # interpret the first line (until the first dot) of a Qt-style
rgrover1 980:07ce7d9ed5ff 172 # comment as the brief description. If set to NO, the comments
rgrover1 980:07ce7d9ed5ff 173 # will behave just like regular Qt-style comments (thus requiring
rgrover1 980:07ce7d9ed5ff 174 # an explicit \brief command for a brief description.)
rgrover1 980:07ce7d9ed5ff 175
rgrover1 980:07ce7d9ed5ff 176 QT_AUTOBRIEF = NO
rgrover1 980:07ce7d9ed5ff 177
rgrover1 980:07ce7d9ed5ff 178 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
rgrover1 980:07ce7d9ed5ff 179 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
rgrover1 980:07ce7d9ed5ff 180 # comments) as a brief description. This used to be the default behaviour.
rgrover1 980:07ce7d9ed5ff 181 # The new default is to treat a multi-line C++ comment block as a detailed
rgrover1 980:07ce7d9ed5ff 182 # description. Set this tag to YES if you prefer the old behaviour instead.
rgrover1 980:07ce7d9ed5ff 183
rgrover1 980:07ce7d9ed5ff 184 MULTILINE_CPP_IS_BRIEF = NO
rgrover1 980:07ce7d9ed5ff 185
rgrover1 980:07ce7d9ed5ff 186 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
rgrover1 980:07ce7d9ed5ff 187 # member inherits the documentation from any documented member that it
rgrover1 980:07ce7d9ed5ff 188 # re-implements.
rgrover1 980:07ce7d9ed5ff 189
rgrover1 980:07ce7d9ed5ff 190 INHERIT_DOCS = YES
rgrover1 980:07ce7d9ed5ff 191
rgrover1 980:07ce7d9ed5ff 192 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
rgrover1 980:07ce7d9ed5ff 193 # a new page for each member. If set to NO, the documentation of a member will
rgrover1 980:07ce7d9ed5ff 194 # be part of the file/class/namespace that contains it.
rgrover1 980:07ce7d9ed5ff 195
rgrover1 980:07ce7d9ed5ff 196 SEPARATE_MEMBER_PAGES = NO
rgrover1 980:07ce7d9ed5ff 197
rgrover1 980:07ce7d9ed5ff 198 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
rgrover1 980:07ce7d9ed5ff 199 # Doxygen uses this value to replace tabs by spaces in code fragments.
rgrover1 980:07ce7d9ed5ff 200
rgrover1 980:07ce7d9ed5ff 201 TAB_SIZE = 4
rgrover1 980:07ce7d9ed5ff 202
rgrover1 980:07ce7d9ed5ff 203 # This tag can be used to specify a number of aliases that acts
rgrover1 980:07ce7d9ed5ff 204 # as commands in the documentation. An alias has the form "name=value".
rgrover1 980:07ce7d9ed5ff 205 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
rgrover1 980:07ce7d9ed5ff 206 # put the command \sideeffect (or @sideeffect) in the documentation, which
rgrover1 980:07ce7d9ed5ff 207 # will result in a user-defined paragraph with heading "Side Effects:".
rgrover1 980:07ce7d9ed5ff 208 # You can put \n's in the value part of an alias to insert newlines.
rgrover1 980:07ce7d9ed5ff 209
rgrover1 980:07ce7d9ed5ff 210 ALIASES =
rgrover1 980:07ce7d9ed5ff 211
rgrover1 980:07ce7d9ed5ff 212 # This tag can be used to specify a number of word-keyword mappings (TCL only).
rgrover1 980:07ce7d9ed5ff 213 # A mapping has the form "name=value". For example adding
rgrover1 980:07ce7d9ed5ff 214 # "class=itcl::class" will allow you to use the command class in the
rgrover1 980:07ce7d9ed5ff 215 # itcl::class meaning.
rgrover1 980:07ce7d9ed5ff 216
rgrover1 980:07ce7d9ed5ff 217 TCL_SUBST =
rgrover1 980:07ce7d9ed5ff 218
rgrover1 980:07ce7d9ed5ff 219 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
rgrover1 980:07ce7d9ed5ff 220 # sources only. Doxygen will then generate output that is more tailored for C.
rgrover1 980:07ce7d9ed5ff 221 # For instance, some of the names that are used will be different. The list
rgrover1 980:07ce7d9ed5ff 222 # of all members will be omitted, etc.
rgrover1 980:07ce7d9ed5ff 223
rgrover1 980:07ce7d9ed5ff 224 OPTIMIZE_OUTPUT_FOR_C = NO
rgrover1 980:07ce7d9ed5ff 225
rgrover1 980:07ce7d9ed5ff 226 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
rgrover1 980:07ce7d9ed5ff 227 # sources only. Doxygen will then generate output that is more tailored for
rgrover1 980:07ce7d9ed5ff 228 # Java. For instance, namespaces will be presented as packages, qualified
rgrover1 980:07ce7d9ed5ff 229 # scopes will look different, etc.
rgrover1 980:07ce7d9ed5ff 230
rgrover1 980:07ce7d9ed5ff 231 OPTIMIZE_OUTPUT_JAVA = NO
rgrover1 980:07ce7d9ed5ff 232
rgrover1 980:07ce7d9ed5ff 233 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
rgrover1 980:07ce7d9ed5ff 234 # sources only. Doxygen will then generate output that is more tailored for
rgrover1 980:07ce7d9ed5ff 235 # Fortran.
rgrover1 980:07ce7d9ed5ff 236
rgrover1 980:07ce7d9ed5ff 237 OPTIMIZE_FOR_FORTRAN = NO
rgrover1 980:07ce7d9ed5ff 238
rgrover1 980:07ce7d9ed5ff 239 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
rgrover1 980:07ce7d9ed5ff 240 # sources. Doxygen will then generate output that is tailored for
rgrover1 980:07ce7d9ed5ff 241 # VHDL.
rgrover1 980:07ce7d9ed5ff 242
rgrover1 980:07ce7d9ed5ff 243 OPTIMIZE_OUTPUT_VHDL = NO
rgrover1 980:07ce7d9ed5ff 244
rgrover1 980:07ce7d9ed5ff 245 # Doxygen selects the parser to use depending on the extension of the files it
rgrover1 980:07ce7d9ed5ff 246 # parses. With this tag you can assign which parser to use for a given
rgrover1 980:07ce7d9ed5ff 247 # extension. Doxygen has a built-in mapping, but you can override or extend it
rgrover1 980:07ce7d9ed5ff 248 # using this tag. The format is ext=language, where ext is a file extension,
rgrover1 980:07ce7d9ed5ff 249 # and language is one of the parsers supported by doxygen: IDL, Java,
rgrover1 980:07ce7d9ed5ff 250 # Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C,
rgrover1 980:07ce7d9ed5ff 251 # C++. For instance to make doxygen treat .inc files as Fortran files (default
rgrover1 980:07ce7d9ed5ff 252 # is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note
rgrover1 980:07ce7d9ed5ff 253 # that for custom extensions you also need to set FILE_PATTERNS otherwise the
rgrover1 980:07ce7d9ed5ff 254 # files are not read by doxygen.
rgrover1 980:07ce7d9ed5ff 255
rgrover1 980:07ce7d9ed5ff 256 EXTENSION_MAPPING =
rgrover1 980:07ce7d9ed5ff 257
rgrover1 980:07ce7d9ed5ff 258 # If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
rgrover1 980:07ce7d9ed5ff 259 # comments according to the Markdown format, which allows for more readable
rgrover1 980:07ce7d9ed5ff 260 # documentation. See http://daringfireball.net/projects/markdown/ for details.
rgrover1 980:07ce7d9ed5ff 261 # The output of markdown processing is further processed by doxygen, so you
rgrover1 980:07ce7d9ed5ff 262 # can mix doxygen, HTML, and XML commands with Markdown formatting.
rgrover1 980:07ce7d9ed5ff 263 # Disable only in case of backward compatibilities issues.
rgrover1 980:07ce7d9ed5ff 264
rgrover1 980:07ce7d9ed5ff 265 MARKDOWN_SUPPORT = YES
rgrover1 980:07ce7d9ed5ff 266
rgrover1 980:07ce7d9ed5ff 267 # When enabled doxygen tries to link words that correspond to documented
rgrover1 980:07ce7d9ed5ff 268 # classes, or namespaces to their corresponding documentation. Such a link can
rgrover1 980:07ce7d9ed5ff 269 # be prevented in individual cases by by putting a % sign in front of the word
rgrover1 980:07ce7d9ed5ff 270 # or globally by setting AUTOLINK_SUPPORT to NO.
rgrover1 980:07ce7d9ed5ff 271
rgrover1 980:07ce7d9ed5ff 272 AUTOLINK_SUPPORT = YES
rgrover1 980:07ce7d9ed5ff 273
rgrover1 980:07ce7d9ed5ff 274 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
rgrover1 980:07ce7d9ed5ff 275 # to include (a tag file for) the STL sources as input, then you should
rgrover1 980:07ce7d9ed5ff 276 # set this tag to YES in order to let doxygen match functions declarations and
rgrover1 980:07ce7d9ed5ff 277 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
rgrover1 980:07ce7d9ed5ff 278 # func(std::string) {}). This also makes the inheritance and collaboration
rgrover1 980:07ce7d9ed5ff 279 # diagrams that involve STL classes more complete and accurate.
rgrover1 980:07ce7d9ed5ff 280
rgrover1 980:07ce7d9ed5ff 281 BUILTIN_STL_SUPPORT = NO
rgrover1 980:07ce7d9ed5ff 282
rgrover1 980:07ce7d9ed5ff 283 # If you use Microsoft's C++/CLI language, you should set this option to YES to
rgrover1 980:07ce7d9ed5ff 284 # enable parsing support.
rgrover1 980:07ce7d9ed5ff 285
rgrover1 980:07ce7d9ed5ff 286 CPP_CLI_SUPPORT = NO
rgrover1 980:07ce7d9ed5ff 287
rgrover1 980:07ce7d9ed5ff 288 # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
rgrover1 980:07ce7d9ed5ff 289 # Doxygen will parse them like normal C++ but will assume all classes use public
rgrover1 980:07ce7d9ed5ff 290 # instead of private inheritance when no explicit protection keyword is present.
rgrover1 980:07ce7d9ed5ff 291
rgrover1 980:07ce7d9ed5ff 292 SIP_SUPPORT = NO
rgrover1 980:07ce7d9ed5ff 293
rgrover1 980:07ce7d9ed5ff 294 # For Microsoft's IDL there are propget and propput attributes to indicate
rgrover1 980:07ce7d9ed5ff 295 # getter and setter methods for a property. Setting this option to YES (the
rgrover1 980:07ce7d9ed5ff 296 # default) will make doxygen replace the get and set methods by a property in
rgrover1 980:07ce7d9ed5ff 297 # the documentation. This will only work if the methods are indeed getting or
rgrover1 980:07ce7d9ed5ff 298 # setting a simple type. If this is not the case, or you want to show the
rgrover1 980:07ce7d9ed5ff 299 # methods anyway, you should set this option to NO.
rgrover1 980:07ce7d9ed5ff 300
rgrover1 980:07ce7d9ed5ff 301 IDL_PROPERTY_SUPPORT = YES
rgrover1 980:07ce7d9ed5ff 302
rgrover1 980:07ce7d9ed5ff 303 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
rgrover1 980:07ce7d9ed5ff 304 # tag is set to YES, then doxygen will reuse the documentation of the first
rgrover1 980:07ce7d9ed5ff 305 # member in the group (if any) for the other members of the group. By default
rgrover1 980:07ce7d9ed5ff 306 # all members of a group must be documented explicitly.
rgrover1 980:07ce7d9ed5ff 307
rgrover1 980:07ce7d9ed5ff 308 DISTRIBUTE_GROUP_DOC = NO
rgrover1 980:07ce7d9ed5ff 309
rgrover1 980:07ce7d9ed5ff 310 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
rgrover1 980:07ce7d9ed5ff 311 # the same type (for instance a group of public functions) to be put as a
rgrover1 980:07ce7d9ed5ff 312 # subgroup of that type (e.g. under the Public Functions section). Set it to
rgrover1 980:07ce7d9ed5ff 313 # NO to prevent subgrouping. Alternatively, this can be done per class using
rgrover1 980:07ce7d9ed5ff 314 # the \nosubgrouping command.
rgrover1 980:07ce7d9ed5ff 315
rgrover1 980:07ce7d9ed5ff 316 SUBGROUPING = YES
rgrover1 980:07ce7d9ed5ff 317
rgrover1 980:07ce7d9ed5ff 318 # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
rgrover1 980:07ce7d9ed5ff 319 # unions are shown inside the group in which they are included (e.g. using
rgrover1 980:07ce7d9ed5ff 320 # @ingroup) instead of on a separate page (for HTML and Man pages) or
rgrover1 980:07ce7d9ed5ff 321 # section (for LaTeX and RTF).
rgrover1 980:07ce7d9ed5ff 322
rgrover1 980:07ce7d9ed5ff 323 INLINE_GROUPED_CLASSES = NO
rgrover1 980:07ce7d9ed5ff 324
rgrover1 980:07ce7d9ed5ff 325 # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
rgrover1 980:07ce7d9ed5ff 326 # unions with only public data fields or simple typedef fields will be shown
rgrover1 980:07ce7d9ed5ff 327 # inline in the documentation of the scope in which they are defined (i.e. file,
rgrover1 980:07ce7d9ed5ff 328 # namespace, or group documentation), provided this scope is documented. If set
rgrover1 980:07ce7d9ed5ff 329 # to NO (the default), structs, classes, and unions are shown on a separate
rgrover1 980:07ce7d9ed5ff 330 # page (for HTML and Man pages) or section (for LaTeX and RTF).
rgrover1 980:07ce7d9ed5ff 331
rgrover1 980:07ce7d9ed5ff 332 INLINE_SIMPLE_STRUCTS = YES
rgrover1 980:07ce7d9ed5ff 333
rgrover1 980:07ce7d9ed5ff 334 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
rgrover1 980:07ce7d9ed5ff 335 # is documented as struct, union, or enum with the name of the typedef. So
rgrover1 980:07ce7d9ed5ff 336 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
rgrover1 980:07ce7d9ed5ff 337 # with name TypeT. When disabled the typedef will appear as a member of a file,
rgrover1 980:07ce7d9ed5ff 338 # namespace, or class. And the struct will be named TypeS. This can typically
rgrover1 980:07ce7d9ed5ff 339 # be useful for C code in case the coding convention dictates that all compound
rgrover1 980:07ce7d9ed5ff 340 # types are typedef'ed and only the typedef is referenced, never the tag name.
rgrover1 980:07ce7d9ed5ff 341
rgrover1 980:07ce7d9ed5ff 342 TYPEDEF_HIDES_STRUCT = NO
rgrover1 980:07ce7d9ed5ff 343
rgrover1 980:07ce7d9ed5ff 344 # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
rgrover1 980:07ce7d9ed5ff 345 # cache is used to resolve symbols given their name and scope. Since this can
rgrover1 980:07ce7d9ed5ff 346 # be an expensive process and often the same symbol appear multiple times in
rgrover1 980:07ce7d9ed5ff 347 # the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too
rgrover1 980:07ce7d9ed5ff 348 # small doxygen will become slower. If the cache is too large, memory is wasted.
rgrover1 980:07ce7d9ed5ff 349 # The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid
rgrover1 980:07ce7d9ed5ff 350 # range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536
rgrover1 980:07ce7d9ed5ff 351 # symbols.
rgrover1 980:07ce7d9ed5ff 352
rgrover1 980:07ce7d9ed5ff 353 LOOKUP_CACHE_SIZE = 0
rgrover1 980:07ce7d9ed5ff 354
rgrover1 980:07ce7d9ed5ff 355 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 356 # Build related configuration options
rgrover1 980:07ce7d9ed5ff 357 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 358
rgrover1 980:07ce7d9ed5ff 359 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
rgrover1 980:07ce7d9ed5ff 360 # documentation are documented, even if no documentation was available.
rgrover1 980:07ce7d9ed5ff 361 # Private class members and static file members will be hidden unless
rgrover1 980:07ce7d9ed5ff 362 # the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES
rgrover1 980:07ce7d9ed5ff 363
rgrover1 980:07ce7d9ed5ff 364 EXTRACT_ALL = YES
rgrover1 980:07ce7d9ed5ff 365
rgrover1 980:07ce7d9ed5ff 366 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
rgrover1 980:07ce7d9ed5ff 367 # will be included in the documentation.
rgrover1 980:07ce7d9ed5ff 368
rgrover1 980:07ce7d9ed5ff 369 EXTRACT_PRIVATE = YES
rgrover1 980:07ce7d9ed5ff 370
rgrover1 980:07ce7d9ed5ff 371 # If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
rgrover1 980:07ce7d9ed5ff 372 # scope will be included in the documentation.
rgrover1 980:07ce7d9ed5ff 373
rgrover1 980:07ce7d9ed5ff 374 EXTRACT_PACKAGE = NO
rgrover1 980:07ce7d9ed5ff 375
rgrover1 980:07ce7d9ed5ff 376 # If the EXTRACT_STATIC tag is set to YES all static members of a file
rgrover1 980:07ce7d9ed5ff 377 # will be included in the documentation.
rgrover1 980:07ce7d9ed5ff 378
rgrover1 980:07ce7d9ed5ff 379 EXTRACT_STATIC = YES
rgrover1 980:07ce7d9ed5ff 380
rgrover1 980:07ce7d9ed5ff 381 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
rgrover1 980:07ce7d9ed5ff 382 # defined locally in source files will be included in the documentation.
rgrover1 980:07ce7d9ed5ff 383 # If set to NO only classes defined in header files are included.
rgrover1 980:07ce7d9ed5ff 384
rgrover1 980:07ce7d9ed5ff 385 EXTRACT_LOCAL_CLASSES = YES
rgrover1 980:07ce7d9ed5ff 386
rgrover1 980:07ce7d9ed5ff 387 # This flag is only useful for Objective-C code. When set to YES local
rgrover1 980:07ce7d9ed5ff 388 # methods, which are defined in the implementation section but not in
rgrover1 980:07ce7d9ed5ff 389 # the interface are included in the documentation.
rgrover1 980:07ce7d9ed5ff 390 # If set to NO (the default) only methods in the interface are included.
rgrover1 980:07ce7d9ed5ff 391
rgrover1 980:07ce7d9ed5ff 392 EXTRACT_LOCAL_METHODS = YES
rgrover1 980:07ce7d9ed5ff 393
rgrover1 980:07ce7d9ed5ff 394 # If this flag is set to YES, the members of anonymous namespaces will be
rgrover1 980:07ce7d9ed5ff 395 # extracted and appear in the documentation as a namespace called
rgrover1 980:07ce7d9ed5ff 396 # 'anonymous_namespace{file}', where file will be replaced with the base
rgrover1 980:07ce7d9ed5ff 397 # name of the file that contains the anonymous namespace. By default
rgrover1 980:07ce7d9ed5ff 398 # anonymous namespaces are hidden.
rgrover1 980:07ce7d9ed5ff 399
rgrover1 980:07ce7d9ed5ff 400 EXTRACT_ANON_NSPACES = YES
rgrover1 980:07ce7d9ed5ff 401
rgrover1 980:07ce7d9ed5ff 402 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
rgrover1 980:07ce7d9ed5ff 403 # undocumented members of documented classes, files or namespaces.
rgrover1 980:07ce7d9ed5ff 404 # If set to NO (the default) these members will be included in the
rgrover1 980:07ce7d9ed5ff 405 # various overviews, but no documentation section is generated.
rgrover1 980:07ce7d9ed5ff 406 # This option has no effect if EXTRACT_ALL is enabled.
rgrover1 980:07ce7d9ed5ff 407
rgrover1 980:07ce7d9ed5ff 408 HIDE_UNDOC_MEMBERS = NO
rgrover1 980:07ce7d9ed5ff 409
rgrover1 980:07ce7d9ed5ff 410 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
rgrover1 980:07ce7d9ed5ff 411 # undocumented classes that are normally visible in the class hierarchy.
rgrover1 980:07ce7d9ed5ff 412 # If set to NO (the default) these classes will be included in the various
rgrover1 980:07ce7d9ed5ff 413 # overviews. This option has no effect if EXTRACT_ALL is enabled.
rgrover1 980:07ce7d9ed5ff 414
rgrover1 980:07ce7d9ed5ff 415 HIDE_UNDOC_CLASSES = NO
rgrover1 980:07ce7d9ed5ff 416
rgrover1 980:07ce7d9ed5ff 417 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
rgrover1 980:07ce7d9ed5ff 418 # friend (class|struct|union) declarations.
rgrover1 980:07ce7d9ed5ff 419 # If set to NO (the default) these declarations will be included in the
rgrover1 980:07ce7d9ed5ff 420 # documentation.
rgrover1 980:07ce7d9ed5ff 421
rgrover1 980:07ce7d9ed5ff 422 HIDE_FRIEND_COMPOUNDS = NO
rgrover1 980:07ce7d9ed5ff 423
rgrover1 980:07ce7d9ed5ff 424 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
rgrover1 980:07ce7d9ed5ff 425 # documentation blocks found inside the body of a function.
rgrover1 980:07ce7d9ed5ff 426 # If set to NO (the default) these blocks will be appended to the
rgrover1 980:07ce7d9ed5ff 427 # function's detailed documentation block.
rgrover1 980:07ce7d9ed5ff 428
rgrover1 980:07ce7d9ed5ff 429 HIDE_IN_BODY_DOCS = NO
rgrover1 980:07ce7d9ed5ff 430
rgrover1 980:07ce7d9ed5ff 431 # The INTERNAL_DOCS tag determines if documentation
rgrover1 980:07ce7d9ed5ff 432 # that is typed after a \internal command is included. If the tag is set
rgrover1 980:07ce7d9ed5ff 433 # to NO (the default) then the documentation will be excluded.
rgrover1 980:07ce7d9ed5ff 434 # Set it to YES to include the internal documentation.
rgrover1 980:07ce7d9ed5ff 435
rgrover1 980:07ce7d9ed5ff 436 INTERNAL_DOCS = NO
rgrover1 980:07ce7d9ed5ff 437
rgrover1 980:07ce7d9ed5ff 438 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
rgrover1 980:07ce7d9ed5ff 439 # file names in lower-case letters. If set to YES upper-case letters are also
rgrover1 980:07ce7d9ed5ff 440 # allowed. This is useful if you have classes or files whose names only differ
rgrover1 980:07ce7d9ed5ff 441 # in case and if your file system supports case sensitive file names. Windows
rgrover1 980:07ce7d9ed5ff 442 # and Mac users are advised to set this option to NO.
rgrover1 980:07ce7d9ed5ff 443
rgrover1 980:07ce7d9ed5ff 444 CASE_SENSE_NAMES = NO
rgrover1 980:07ce7d9ed5ff 445
rgrover1 980:07ce7d9ed5ff 446 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
rgrover1 980:07ce7d9ed5ff 447 # will show members with their full class and namespace scopes in the
rgrover1 980:07ce7d9ed5ff 448 # documentation. If set to YES the scope will be hidden.
rgrover1 980:07ce7d9ed5ff 449
rgrover1 980:07ce7d9ed5ff 450 HIDE_SCOPE_NAMES = NO
rgrover1 980:07ce7d9ed5ff 451
rgrover1 980:07ce7d9ed5ff 452 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
rgrover1 980:07ce7d9ed5ff 453 # will put a list of the files that are included by a file in the documentation
rgrover1 980:07ce7d9ed5ff 454 # of that file.
rgrover1 980:07ce7d9ed5ff 455
rgrover1 980:07ce7d9ed5ff 456 SHOW_INCLUDE_FILES = YES
rgrover1 980:07ce7d9ed5ff 457
rgrover1 980:07ce7d9ed5ff 458 # If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
rgrover1 980:07ce7d9ed5ff 459 # will list include files with double quotes in the documentation
rgrover1 980:07ce7d9ed5ff 460 # rather than with sharp brackets.
rgrover1 980:07ce7d9ed5ff 461
rgrover1 980:07ce7d9ed5ff 462 FORCE_LOCAL_INCLUDES = NO
rgrover1 980:07ce7d9ed5ff 463
rgrover1 980:07ce7d9ed5ff 464 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
rgrover1 980:07ce7d9ed5ff 465 # is inserted in the documentation for inline members.
rgrover1 980:07ce7d9ed5ff 466
rgrover1 980:07ce7d9ed5ff 467 INLINE_INFO = YES
rgrover1 980:07ce7d9ed5ff 468
rgrover1 980:07ce7d9ed5ff 469 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
rgrover1 980:07ce7d9ed5ff 470 # will sort the (detailed) documentation of file and class members
rgrover1 980:07ce7d9ed5ff 471 # alphabetically by member name. If set to NO the members will appear in
rgrover1 980:07ce7d9ed5ff 472 # declaration order.
rgrover1 980:07ce7d9ed5ff 473
rgrover1 980:07ce7d9ed5ff 474 SORT_MEMBER_DOCS = YES
rgrover1 980:07ce7d9ed5ff 475
rgrover1 980:07ce7d9ed5ff 476 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
rgrover1 980:07ce7d9ed5ff 477 # brief documentation of file, namespace and class members alphabetically
rgrover1 980:07ce7d9ed5ff 478 # by member name. If set to NO (the default) the members will appear in
rgrover1 980:07ce7d9ed5ff 479 # declaration order.
rgrover1 980:07ce7d9ed5ff 480
rgrover1 980:07ce7d9ed5ff 481 SORT_BRIEF_DOCS = NO
rgrover1 980:07ce7d9ed5ff 482
rgrover1 980:07ce7d9ed5ff 483 # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
rgrover1 980:07ce7d9ed5ff 484 # will sort the (brief and detailed) documentation of class members so that
rgrover1 980:07ce7d9ed5ff 485 # constructors and destructors are listed first. If set to NO (the default)
rgrover1 980:07ce7d9ed5ff 486 # the constructors will appear in the respective orders defined by
rgrover1 980:07ce7d9ed5ff 487 # SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
rgrover1 980:07ce7d9ed5ff 488 # This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
rgrover1 980:07ce7d9ed5ff 489 # and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
rgrover1 980:07ce7d9ed5ff 490
rgrover1 980:07ce7d9ed5ff 491 SORT_MEMBERS_CTORS_1ST = NO
rgrover1 980:07ce7d9ed5ff 492
rgrover1 980:07ce7d9ed5ff 493 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
rgrover1 980:07ce7d9ed5ff 494 # hierarchy of group names into alphabetical order. If set to NO (the default)
rgrover1 980:07ce7d9ed5ff 495 # the group names will appear in their defined order.
rgrover1 980:07ce7d9ed5ff 496
rgrover1 980:07ce7d9ed5ff 497 SORT_GROUP_NAMES = NO
rgrover1 980:07ce7d9ed5ff 498
rgrover1 980:07ce7d9ed5ff 499 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
rgrover1 980:07ce7d9ed5ff 500 # sorted by fully-qualified names, including namespaces. If set to
rgrover1 980:07ce7d9ed5ff 501 # NO (the default), the class list will be sorted only by class name,
rgrover1 980:07ce7d9ed5ff 502 # not including the namespace part.
rgrover1 980:07ce7d9ed5ff 503 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
rgrover1 980:07ce7d9ed5ff 504 # Note: This option applies only to the class list, not to the
rgrover1 980:07ce7d9ed5ff 505 # alphabetical list.
rgrover1 980:07ce7d9ed5ff 506
rgrover1 980:07ce7d9ed5ff 507 SORT_BY_SCOPE_NAME = NO
rgrover1 980:07ce7d9ed5ff 508
rgrover1 980:07ce7d9ed5ff 509 # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
rgrover1 980:07ce7d9ed5ff 510 # do proper type resolution of all parameters of a function it will reject a
rgrover1 980:07ce7d9ed5ff 511 # match between the prototype and the implementation of a member function even
rgrover1 980:07ce7d9ed5ff 512 # if there is only one candidate or it is obvious which candidate to choose
rgrover1 980:07ce7d9ed5ff 513 # by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
rgrover1 980:07ce7d9ed5ff 514 # will still accept a match between prototype and implementation in such cases.
rgrover1 980:07ce7d9ed5ff 515
rgrover1 980:07ce7d9ed5ff 516 STRICT_PROTO_MATCHING = NO
rgrover1 980:07ce7d9ed5ff 517
rgrover1 980:07ce7d9ed5ff 518 # The GENERATE_TODOLIST tag can be used to enable (YES) or
rgrover1 980:07ce7d9ed5ff 519 # disable (NO) the todo list. This list is created by putting \todo
rgrover1 980:07ce7d9ed5ff 520 # commands in the documentation.
rgrover1 980:07ce7d9ed5ff 521
rgrover1 980:07ce7d9ed5ff 522 GENERATE_TODOLIST = YES
rgrover1 980:07ce7d9ed5ff 523
rgrover1 980:07ce7d9ed5ff 524 # The GENERATE_TESTLIST tag can be used to enable (YES) or
rgrover1 980:07ce7d9ed5ff 525 # disable (NO) the test list. This list is created by putting \test
rgrover1 980:07ce7d9ed5ff 526 # commands in the documentation.
rgrover1 980:07ce7d9ed5ff 527
rgrover1 980:07ce7d9ed5ff 528 GENERATE_TESTLIST = YES
rgrover1 980:07ce7d9ed5ff 529
rgrover1 980:07ce7d9ed5ff 530 # The GENERATE_BUGLIST tag can be used to enable (YES) or
rgrover1 980:07ce7d9ed5ff 531 # disable (NO) the bug list. This list is created by putting \bug
rgrover1 980:07ce7d9ed5ff 532 # commands in the documentation.
rgrover1 980:07ce7d9ed5ff 533
rgrover1 980:07ce7d9ed5ff 534 GENERATE_BUGLIST = YES
rgrover1 980:07ce7d9ed5ff 535
rgrover1 980:07ce7d9ed5ff 536 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
rgrover1 980:07ce7d9ed5ff 537 # disable (NO) the deprecated list. This list is created by putting
rgrover1 980:07ce7d9ed5ff 538 # \deprecated commands in the documentation.
rgrover1 980:07ce7d9ed5ff 539
rgrover1 980:07ce7d9ed5ff 540 GENERATE_DEPRECATEDLIST= YES
rgrover1 980:07ce7d9ed5ff 541
rgrover1 980:07ce7d9ed5ff 542 # The ENABLED_SECTIONS tag can be used to enable conditional
rgrover1 980:07ce7d9ed5ff 543 # documentation sections, marked by \if section-label ... \endif
rgrover1 980:07ce7d9ed5ff 544 # and \cond section-label ... \endcond blocks.
rgrover1 980:07ce7d9ed5ff 545
rgrover1 980:07ce7d9ed5ff 546 ENABLED_SECTIONS =
rgrover1 980:07ce7d9ed5ff 547
rgrover1 980:07ce7d9ed5ff 548 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
rgrover1 980:07ce7d9ed5ff 549 # the initial value of a variable or macro consists of for it to appear in
rgrover1 980:07ce7d9ed5ff 550 # the documentation. If the initializer consists of more lines than specified
rgrover1 980:07ce7d9ed5ff 551 # here it will be hidden. Use a value of 0 to hide initializers completely.
rgrover1 980:07ce7d9ed5ff 552 # The appearance of the initializer of individual variables and macros in the
rgrover1 980:07ce7d9ed5ff 553 # documentation can be controlled using \showinitializer or \hideinitializer
rgrover1 980:07ce7d9ed5ff 554 # command in the documentation regardless of this setting.
rgrover1 980:07ce7d9ed5ff 555
rgrover1 980:07ce7d9ed5ff 556 MAX_INITIALIZER_LINES = 30
rgrover1 980:07ce7d9ed5ff 557
rgrover1 980:07ce7d9ed5ff 558 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
rgrover1 980:07ce7d9ed5ff 559 # at the bottom of the documentation of classes and structs. If set to YES the
rgrover1 980:07ce7d9ed5ff 560 # list will mention the files that were used to generate the documentation.
rgrover1 980:07ce7d9ed5ff 561
rgrover1 980:07ce7d9ed5ff 562 SHOW_USED_FILES = YES
rgrover1 980:07ce7d9ed5ff 563
rgrover1 980:07ce7d9ed5ff 564 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
rgrover1 980:07ce7d9ed5ff 565 # This will remove the Files entry from the Quick Index and from the
rgrover1 980:07ce7d9ed5ff 566 # Folder Tree View (if specified). The default is YES.
rgrover1 980:07ce7d9ed5ff 567
rgrover1 980:07ce7d9ed5ff 568 SHOW_FILES = YES
rgrover1 980:07ce7d9ed5ff 569
rgrover1 980:07ce7d9ed5ff 570 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the
rgrover1 980:07ce7d9ed5ff 571 # Namespaces page.
rgrover1 980:07ce7d9ed5ff 572 # This will remove the Namespaces entry from the Quick Index
rgrover1 980:07ce7d9ed5ff 573 # and from the Folder Tree View (if specified). The default is YES.
rgrover1 980:07ce7d9ed5ff 574
rgrover1 980:07ce7d9ed5ff 575 SHOW_NAMESPACES = YES
rgrover1 980:07ce7d9ed5ff 576
rgrover1 980:07ce7d9ed5ff 577 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
rgrover1 980:07ce7d9ed5ff 578 # doxygen should invoke to get the current version for each file (typically from
rgrover1 980:07ce7d9ed5ff 579 # the version control system). Doxygen will invoke the program by executing (via
rgrover1 980:07ce7d9ed5ff 580 # popen()) the command <command> <input-file>, where <command> is the value of
rgrover1 980:07ce7d9ed5ff 581 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
rgrover1 980:07ce7d9ed5ff 582 # provided by doxygen. Whatever the program writes to standard output
rgrover1 980:07ce7d9ed5ff 583 # is used as the file version. See the manual for examples.
rgrover1 980:07ce7d9ed5ff 584
rgrover1 980:07ce7d9ed5ff 585 FILE_VERSION_FILTER =
rgrover1 980:07ce7d9ed5ff 586
rgrover1 980:07ce7d9ed5ff 587 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
rgrover1 980:07ce7d9ed5ff 588 # by doxygen. The layout file controls the global structure of the generated
rgrover1 980:07ce7d9ed5ff 589 # output files in an output format independent way. To create the layout file
rgrover1 980:07ce7d9ed5ff 590 # that represents doxygen's defaults, run doxygen with the -l option.
rgrover1 980:07ce7d9ed5ff 591 # You can optionally specify a file name after the option, if omitted
rgrover1 980:07ce7d9ed5ff 592 # DoxygenLayout.xml will be used as the name of the layout file.
rgrover1 980:07ce7d9ed5ff 593
rgrover1 980:07ce7d9ed5ff 594 LAYOUT_FILE =
rgrover1 980:07ce7d9ed5ff 595
rgrover1 980:07ce7d9ed5ff 596 # The CITE_BIB_FILES tag can be used to specify one or more bib files
rgrover1 980:07ce7d9ed5ff 597 # containing the references data. This must be a list of .bib files. The
rgrover1 980:07ce7d9ed5ff 598 # .bib extension is automatically appended if omitted. Using this command
rgrover1 980:07ce7d9ed5ff 599 # requires the bibtex tool to be installed. See also
rgrover1 980:07ce7d9ed5ff 600 # http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
rgrover1 980:07ce7d9ed5ff 601 # of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
rgrover1 980:07ce7d9ed5ff 602 # feature you need bibtex and perl available in the search path. Do not use
rgrover1 980:07ce7d9ed5ff 603 # file names with spaces, bibtex cannot handle them.
rgrover1 980:07ce7d9ed5ff 604
rgrover1 980:07ce7d9ed5ff 605 CITE_BIB_FILES =
rgrover1 980:07ce7d9ed5ff 606
rgrover1 980:07ce7d9ed5ff 607 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 608 # configuration options related to warning and progress messages
rgrover1 980:07ce7d9ed5ff 609 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 610
rgrover1 980:07ce7d9ed5ff 611 # The QUIET tag can be used to turn on/off the messages that are generated
rgrover1 980:07ce7d9ed5ff 612 # by doxygen. Possible values are YES and NO. If left blank NO is used.
rgrover1 980:07ce7d9ed5ff 613
rgrover1 980:07ce7d9ed5ff 614 QUIET = NO
rgrover1 980:07ce7d9ed5ff 615
rgrover1 980:07ce7d9ed5ff 616 # The WARNINGS tag can be used to turn on/off the warning messages that are
rgrover1 980:07ce7d9ed5ff 617 # generated by doxygen. Possible values are YES and NO. If left blank
rgrover1 980:07ce7d9ed5ff 618 # NO is used.
rgrover1 980:07ce7d9ed5ff 619
rgrover1 980:07ce7d9ed5ff 620 WARNINGS = YES
rgrover1 980:07ce7d9ed5ff 621
rgrover1 980:07ce7d9ed5ff 622 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
rgrover1 980:07ce7d9ed5ff 623 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
rgrover1 980:07ce7d9ed5ff 624 # automatically be disabled.
rgrover1 980:07ce7d9ed5ff 625
rgrover1 980:07ce7d9ed5ff 626 WARN_IF_UNDOCUMENTED = YES
rgrover1 980:07ce7d9ed5ff 627
rgrover1 980:07ce7d9ed5ff 628 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
rgrover1 980:07ce7d9ed5ff 629 # potential errors in the documentation, such as not documenting some
rgrover1 980:07ce7d9ed5ff 630 # parameters in a documented function, or documenting parameters that
rgrover1 980:07ce7d9ed5ff 631 # don't exist or using markup commands wrongly.
rgrover1 980:07ce7d9ed5ff 632
rgrover1 980:07ce7d9ed5ff 633 WARN_IF_DOC_ERROR = YES
rgrover1 980:07ce7d9ed5ff 634
rgrover1 980:07ce7d9ed5ff 635 # The WARN_NO_PARAMDOC option can be enabled to get warnings for
rgrover1 980:07ce7d9ed5ff 636 # functions that are documented, but have no documentation for their parameters
rgrover1 980:07ce7d9ed5ff 637 # or return value. If set to NO (the default) doxygen will only warn about
rgrover1 980:07ce7d9ed5ff 638 # wrong or incomplete parameter documentation, but not about the absence of
rgrover1 980:07ce7d9ed5ff 639 # documentation.
rgrover1 980:07ce7d9ed5ff 640
rgrover1 980:07ce7d9ed5ff 641 WARN_NO_PARAMDOC = NO
rgrover1 980:07ce7d9ed5ff 642
rgrover1 980:07ce7d9ed5ff 643 # The WARN_FORMAT tag determines the format of the warning messages that
rgrover1 980:07ce7d9ed5ff 644 # doxygen can produce. The string should contain the $file, $line, and $text
rgrover1 980:07ce7d9ed5ff 645 # tags, which will be replaced by the file and line number from which the
rgrover1 980:07ce7d9ed5ff 646 # warning originated and the warning text. Optionally the format may contain
rgrover1 980:07ce7d9ed5ff 647 # $version, which will be replaced by the version of the file (if it could
rgrover1 980:07ce7d9ed5ff 648 # be obtained via FILE_VERSION_FILTER)
rgrover1 980:07ce7d9ed5ff 649
rgrover1 980:07ce7d9ed5ff 650 WARN_FORMAT = "$file:$line: $text"
rgrover1 980:07ce7d9ed5ff 651
rgrover1 980:07ce7d9ed5ff 652 # The WARN_LOGFILE tag can be used to specify a file to which warning
rgrover1 980:07ce7d9ed5ff 653 # and error messages should be written. If left blank the output is written
rgrover1 980:07ce7d9ed5ff 654 # to stderr.
rgrover1 980:07ce7d9ed5ff 655
rgrover1 980:07ce7d9ed5ff 656 WARN_LOGFILE =
rgrover1 980:07ce7d9ed5ff 657
rgrover1 980:07ce7d9ed5ff 658 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 659 # configuration options related to the input files
rgrover1 980:07ce7d9ed5ff 660 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 661
rgrover1 980:07ce7d9ed5ff 662 # The INPUT tag can be used to specify the files and/or directories that contain
rgrover1 980:07ce7d9ed5ff 663 # documented source files. You may enter file names like "myfile.cpp" or
rgrover1 980:07ce7d9ed5ff 664 # directories like "/usr/src/myproject". Separate the files or directories
rgrover1 980:07ce7d9ed5ff 665 # with spaces.
rgrover1 980:07ce7d9ed5ff 666
rgrover1 980:07ce7d9ed5ff 667 INPUT =
rgrover1 980:07ce7d9ed5ff 668
rgrover1 980:07ce7d9ed5ff 669 # This tag can be used to specify the character encoding of the source files
rgrover1 980:07ce7d9ed5ff 670 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
rgrover1 980:07ce7d9ed5ff 671 # also the default input encoding. Doxygen uses libiconv (or the iconv built
rgrover1 980:07ce7d9ed5ff 672 # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
rgrover1 980:07ce7d9ed5ff 673 # the list of possible encodings.
rgrover1 980:07ce7d9ed5ff 674
rgrover1 980:07ce7d9ed5ff 675 INPUT_ENCODING = UTF-8
rgrover1 980:07ce7d9ed5ff 676
rgrover1 980:07ce7d9ed5ff 677 # If the value of the INPUT tag contains directories, you can use the
rgrover1 980:07ce7d9ed5ff 678 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
rgrover1 980:07ce7d9ed5ff 679 # and *.h) to filter out the source-files in the directories. If left
rgrover1 980:07ce7d9ed5ff 680 # blank the following patterns are tested:
rgrover1 980:07ce7d9ed5ff 681 # *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
rgrover1 980:07ce7d9ed5ff 682 # *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
rgrover1 980:07ce7d9ed5ff 683 # *.f90 *.f *.for *.vhd *.vhdl
rgrover1 980:07ce7d9ed5ff 684
rgrover1 980:07ce7d9ed5ff 685 FILE_PATTERNS = *.h *.cpp *.md
rgrover1 980:07ce7d9ed5ff 686
rgrover1 980:07ce7d9ed5ff 687 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
rgrover1 980:07ce7d9ed5ff 688 # should be searched for input files as well. Possible values are YES and NO.
rgrover1 980:07ce7d9ed5ff 689 # If left blank NO is used.
rgrover1 980:07ce7d9ed5ff 690
rgrover1 980:07ce7d9ed5ff 691 RECURSIVE = YES
rgrover1 980:07ce7d9ed5ff 692
rgrover1 980:07ce7d9ed5ff 693 # The EXCLUDE tag can be used to specify files and/or directories that should be
rgrover1 980:07ce7d9ed5ff 694 # excluded from the INPUT source files. This way you can easily exclude a
rgrover1 980:07ce7d9ed5ff 695 # subdirectory from a directory tree whose root is specified with the INPUT tag.
rgrover1 980:07ce7d9ed5ff 696 # Note that relative paths are relative to the directory from which doxygen is
rgrover1 980:07ce7d9ed5ff 697 # run.
rgrover1 980:07ce7d9ed5ff 698
rgrover1 1008:c27e0c6f1f38 699 EXCLUDE = configs CONTRIBUTING.md README.md
rgrover1 980:07ce7d9ed5ff 700
rgrover1 980:07ce7d9ed5ff 701 # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
rgrover1 980:07ce7d9ed5ff 702 # directories that are symbolic links (a Unix file system feature) are excluded
rgrover1 980:07ce7d9ed5ff 703 # from the input.
rgrover1 980:07ce7d9ed5ff 704
rgrover1 980:07ce7d9ed5ff 705 EXCLUDE_SYMLINKS = NO
rgrover1 980:07ce7d9ed5ff 706
rgrover1 980:07ce7d9ed5ff 707 # If the value of the INPUT tag contains directories, you can use the
rgrover1 980:07ce7d9ed5ff 708 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
rgrover1 980:07ce7d9ed5ff 709 # certain files from those directories. Note that the wildcards are matched
rgrover1 980:07ce7d9ed5ff 710 # against the file with absolute path, so to exclude all test directories
rgrover1 980:07ce7d9ed5ff 711 # for example use the pattern */test/*
rgrover1 980:07ce7d9ed5ff 712
rgrover1 980:07ce7d9ed5ff 713 EXCLUDE_PATTERNS =
rgrover1 980:07ce7d9ed5ff 714
rgrover1 980:07ce7d9ed5ff 715 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
rgrover1 980:07ce7d9ed5ff 716 # (namespaces, classes, functions, etc.) that should be excluded from the
rgrover1 980:07ce7d9ed5ff 717 # output. The symbol name can be a fully qualified name, a word, or if the
rgrover1 980:07ce7d9ed5ff 718 # wildcard * is used, a substring. Examples: ANamespace, AClass,
rgrover1 980:07ce7d9ed5ff 719 # AClass::ANamespace, ANamespace::*Test
rgrover1 980:07ce7d9ed5ff 720
rgrover1 980:07ce7d9ed5ff 721 EXCLUDE_SYMBOLS =
rgrover1 980:07ce7d9ed5ff 722
rgrover1 980:07ce7d9ed5ff 723 # The EXAMPLE_PATH tag can be used to specify one or more files or
rgrover1 980:07ce7d9ed5ff 724 # directories that contain example code fragments that are included (see
rgrover1 980:07ce7d9ed5ff 725 # the \include command).
rgrover1 980:07ce7d9ed5ff 726
rgrover1 980:07ce7d9ed5ff 727 EXAMPLE_PATH =
rgrover1 980:07ce7d9ed5ff 728
rgrover1 980:07ce7d9ed5ff 729 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
rgrover1 980:07ce7d9ed5ff 730 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
rgrover1 980:07ce7d9ed5ff 731 # and *.h) to filter out the source-files in the directories. If left
rgrover1 980:07ce7d9ed5ff 732 # blank all files are included.
rgrover1 980:07ce7d9ed5ff 733
rgrover1 980:07ce7d9ed5ff 734 EXAMPLE_PATTERNS = *
rgrover1 980:07ce7d9ed5ff 735
rgrover1 980:07ce7d9ed5ff 736 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
rgrover1 980:07ce7d9ed5ff 737 # searched for input files to be used with the \include or \dontinclude
rgrover1 980:07ce7d9ed5ff 738 # commands irrespective of the value of the RECURSIVE tag.
rgrover1 980:07ce7d9ed5ff 739 # Possible values are YES and NO. If left blank NO is used.
rgrover1 980:07ce7d9ed5ff 740
rgrover1 980:07ce7d9ed5ff 741 EXAMPLE_RECURSIVE = NO
rgrover1 980:07ce7d9ed5ff 742
rgrover1 980:07ce7d9ed5ff 743 # The IMAGE_PATH tag can be used to specify one or more files or
rgrover1 980:07ce7d9ed5ff 744 # directories that contain image that are included in the documentation (see
rgrover1 980:07ce7d9ed5ff 745 # the \image command).
rgrover1 980:07ce7d9ed5ff 746
rgrover1 980:07ce7d9ed5ff 747 IMAGE_PATH =
rgrover1 980:07ce7d9ed5ff 748
rgrover1 980:07ce7d9ed5ff 749 # The INPUT_FILTER tag can be used to specify a program that doxygen should
rgrover1 980:07ce7d9ed5ff 750 # invoke to filter for each input file. Doxygen will invoke the filter program
rgrover1 980:07ce7d9ed5ff 751 # by executing (via popen()) the command <filter> <input-file>, where <filter>
rgrover1 980:07ce7d9ed5ff 752 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
rgrover1 980:07ce7d9ed5ff 753 # input file. Doxygen will then use the output that the filter program writes
rgrover1 980:07ce7d9ed5ff 754 # to standard output.
rgrover1 980:07ce7d9ed5ff 755 # If FILTER_PATTERNS is specified, this tag will be ignored.
rgrover1 980:07ce7d9ed5ff 756 # Note that the filter must not add or remove lines; it is applied before the
rgrover1 980:07ce7d9ed5ff 757 # code is scanned, but not when the output code is generated. If lines are added
rgrover1 980:07ce7d9ed5ff 758 # or removed, the anchors will not be placed correctly.
rgrover1 980:07ce7d9ed5ff 759
rgrover1 980:07ce7d9ed5ff 760 INPUT_FILTER =
rgrover1 980:07ce7d9ed5ff 761
rgrover1 980:07ce7d9ed5ff 762 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
rgrover1 980:07ce7d9ed5ff 763 # basis.
rgrover1 980:07ce7d9ed5ff 764 # Doxygen will compare the file name with each pattern and apply the
rgrover1 980:07ce7d9ed5ff 765 # filter if there is a match.
rgrover1 980:07ce7d9ed5ff 766 # The filters are a list of the form:
rgrover1 980:07ce7d9ed5ff 767 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
rgrover1 980:07ce7d9ed5ff 768 # info on how filters are used. If FILTER_PATTERNS is empty or if
rgrover1 980:07ce7d9ed5ff 769 # non of the patterns match the file name, INPUT_FILTER is applied.
rgrover1 980:07ce7d9ed5ff 770
rgrover1 980:07ce7d9ed5ff 771 FILTER_PATTERNS =
rgrover1 980:07ce7d9ed5ff 772
rgrover1 980:07ce7d9ed5ff 773 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
rgrover1 980:07ce7d9ed5ff 774 # INPUT_FILTER) will be used to filter the input files when producing source
rgrover1 980:07ce7d9ed5ff 775 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
rgrover1 980:07ce7d9ed5ff 776
rgrover1 980:07ce7d9ed5ff 777 FILTER_SOURCE_FILES = NO
rgrover1 980:07ce7d9ed5ff 778
rgrover1 980:07ce7d9ed5ff 779 # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
rgrover1 980:07ce7d9ed5ff 780 # pattern. A pattern will override the setting for FILTER_PATTERN (if any)
rgrover1 980:07ce7d9ed5ff 781 # and it is also possible to disable source filtering for a specific pattern
rgrover1 980:07ce7d9ed5ff 782 # using *.ext= (so without naming a filter). This option only has effect when
rgrover1 980:07ce7d9ed5ff 783 # FILTER_SOURCE_FILES is enabled.
rgrover1 980:07ce7d9ed5ff 784
rgrover1 980:07ce7d9ed5ff 785 FILTER_SOURCE_PATTERNS =
rgrover1 980:07ce7d9ed5ff 786
rgrover1 980:07ce7d9ed5ff 787 # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that
rgrover1 980:07ce7d9ed5ff 788 # is part of the input, its contents will be placed on the main page
rgrover1 980:07ce7d9ed5ff 789 # (index.html). This can be useful if you have a project on for instance GitHub
rgrover1 980:07ce7d9ed5ff 790 # and want reuse the introduction page also for the doxygen output.
rgrover1 980:07ce7d9ed5ff 791
rgrover1 980:07ce7d9ed5ff 792 USE_MDFILE_AS_MAINPAGE = DOXYGEN_FRONTPAGE.md
rgrover1 980:07ce7d9ed5ff 793
rgrover1 980:07ce7d9ed5ff 794 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 795 # configuration options related to source browsing
rgrover1 980:07ce7d9ed5ff 796 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 797
rgrover1 980:07ce7d9ed5ff 798 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
rgrover1 980:07ce7d9ed5ff 799 # be generated. Documented entities will be cross-referenced with these sources.
rgrover1 980:07ce7d9ed5ff 800 # Note: To get rid of all source code in the generated output, make sure also
rgrover1 980:07ce7d9ed5ff 801 # VERBATIM_HEADERS is set to NO.
rgrover1 980:07ce7d9ed5ff 802
rgrover1 980:07ce7d9ed5ff 803 SOURCE_BROWSER = YES
rgrover1 980:07ce7d9ed5ff 804
rgrover1 980:07ce7d9ed5ff 805 # Setting the INLINE_SOURCES tag to YES will include the body
rgrover1 980:07ce7d9ed5ff 806 # of functions and classes directly in the documentation.
rgrover1 980:07ce7d9ed5ff 807
rgrover1 980:07ce7d9ed5ff 808 INLINE_SOURCES = NO
rgrover1 980:07ce7d9ed5ff 809
rgrover1 980:07ce7d9ed5ff 810 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
rgrover1 980:07ce7d9ed5ff 811 # doxygen to hide any special comment blocks from generated source code
rgrover1 980:07ce7d9ed5ff 812 # fragments. Normal C, C++ and Fortran comments will always remain visible.
rgrover1 980:07ce7d9ed5ff 813
rgrover1 980:07ce7d9ed5ff 814 STRIP_CODE_COMMENTS = YES
rgrover1 980:07ce7d9ed5ff 815
rgrover1 980:07ce7d9ed5ff 816 # If the REFERENCED_BY_RELATION tag is set to YES
rgrover1 980:07ce7d9ed5ff 817 # then for each documented function all documented
rgrover1 980:07ce7d9ed5ff 818 # functions referencing it will be listed.
rgrover1 980:07ce7d9ed5ff 819
rgrover1 980:07ce7d9ed5ff 820 REFERENCED_BY_RELATION = YES
rgrover1 980:07ce7d9ed5ff 821
rgrover1 980:07ce7d9ed5ff 822 # If the REFERENCES_RELATION tag is set to YES
rgrover1 980:07ce7d9ed5ff 823 # then for each documented function all documented entities
rgrover1 980:07ce7d9ed5ff 824 # called/used by that function will be listed.
rgrover1 980:07ce7d9ed5ff 825
rgrover1 980:07ce7d9ed5ff 826 REFERENCES_RELATION = YES
rgrover1 980:07ce7d9ed5ff 827
rgrover1 980:07ce7d9ed5ff 828 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
rgrover1 980:07ce7d9ed5ff 829 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
rgrover1 980:07ce7d9ed5ff 830 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
rgrover1 980:07ce7d9ed5ff 831 # link to the source code.
rgrover1 980:07ce7d9ed5ff 832 # Otherwise they will link to the documentation.
rgrover1 980:07ce7d9ed5ff 833
rgrover1 980:07ce7d9ed5ff 834 REFERENCES_LINK_SOURCE = YES
rgrover1 980:07ce7d9ed5ff 835
rgrover1 980:07ce7d9ed5ff 836 # If the USE_HTAGS tag is set to YES then the references to source code
rgrover1 980:07ce7d9ed5ff 837 # will point to the HTML generated by the htags(1) tool instead of doxygen
rgrover1 980:07ce7d9ed5ff 838 # built-in source browser. The htags tool is part of GNU's global source
rgrover1 980:07ce7d9ed5ff 839 # tagging system (see http://www.gnu.org/software/global/global.html). You
rgrover1 980:07ce7d9ed5ff 840 # will need version 4.8.6 or higher.
rgrover1 980:07ce7d9ed5ff 841
rgrover1 980:07ce7d9ed5ff 842 USE_HTAGS = NO
rgrover1 980:07ce7d9ed5ff 843
rgrover1 980:07ce7d9ed5ff 844 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
rgrover1 980:07ce7d9ed5ff 845 # will generate a verbatim copy of the header file for each class for
rgrover1 980:07ce7d9ed5ff 846 # which an include is specified. Set to NO to disable this.
rgrover1 980:07ce7d9ed5ff 847
rgrover1 980:07ce7d9ed5ff 848 VERBATIM_HEADERS = YES
rgrover1 980:07ce7d9ed5ff 849
rgrover1 980:07ce7d9ed5ff 850 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 851 # configuration options related to the alphabetical class index
rgrover1 980:07ce7d9ed5ff 852 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 853
rgrover1 980:07ce7d9ed5ff 854 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
rgrover1 980:07ce7d9ed5ff 855 # of all compounds will be generated. Enable this if the project
rgrover1 980:07ce7d9ed5ff 856 # contains a lot of classes, structs, unions or interfaces.
rgrover1 980:07ce7d9ed5ff 857
rgrover1 980:07ce7d9ed5ff 858 ALPHABETICAL_INDEX = NO
rgrover1 980:07ce7d9ed5ff 859
rgrover1 980:07ce7d9ed5ff 860 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
rgrover1 980:07ce7d9ed5ff 861 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
rgrover1 980:07ce7d9ed5ff 862 # in which this list will be split (can be a number in the range [1..20])
rgrover1 980:07ce7d9ed5ff 863
rgrover1 980:07ce7d9ed5ff 864 COLS_IN_ALPHA_INDEX = 5
rgrover1 980:07ce7d9ed5ff 865
rgrover1 980:07ce7d9ed5ff 866 # In case all classes in a project start with a common prefix, all
rgrover1 980:07ce7d9ed5ff 867 # classes will be put under the same header in the alphabetical index.
rgrover1 980:07ce7d9ed5ff 868 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
rgrover1 980:07ce7d9ed5ff 869 # should be ignored while generating the index headers.
rgrover1 980:07ce7d9ed5ff 870
rgrover1 980:07ce7d9ed5ff 871 IGNORE_PREFIX =
rgrover1 980:07ce7d9ed5ff 872
rgrover1 980:07ce7d9ed5ff 873 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 874 # configuration options related to the HTML output
rgrover1 980:07ce7d9ed5ff 875 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 876
rgrover1 980:07ce7d9ed5ff 877 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 878 # generate HTML output.
rgrover1 980:07ce7d9ed5ff 879
rgrover1 980:07ce7d9ed5ff 880 GENERATE_HTML = YES
rgrover1 980:07ce7d9ed5ff 881
rgrover1 980:07ce7d9ed5ff 882 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
rgrover1 980:07ce7d9ed5ff 883 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
rgrover1 980:07ce7d9ed5ff 884 # put in front of it. If left blank `html' will be used as the default path.
rgrover1 980:07ce7d9ed5ff 885
rgrover1 980:07ce7d9ed5ff 886 HTML_OUTPUT = .
rgrover1 980:07ce7d9ed5ff 887
rgrover1 980:07ce7d9ed5ff 888 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
rgrover1 980:07ce7d9ed5ff 889 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
rgrover1 980:07ce7d9ed5ff 890 # doxygen will generate files with .html extension.
rgrover1 980:07ce7d9ed5ff 891
rgrover1 980:07ce7d9ed5ff 892 HTML_FILE_EXTENSION = .html
rgrover1 980:07ce7d9ed5ff 893
rgrover1 980:07ce7d9ed5ff 894 # The HTML_HEADER tag can be used to specify a personal HTML header for
rgrover1 980:07ce7d9ed5ff 895 # each generated HTML page. If it is left blank doxygen will generate a
rgrover1 980:07ce7d9ed5ff 896 # standard header. Note that when using a custom header you are responsible
rgrover1 980:07ce7d9ed5ff 897 # for the proper inclusion of any scripts and style sheets that doxygen
rgrover1 980:07ce7d9ed5ff 898 # needs, which is dependent on the configuration options used.
rgrover1 980:07ce7d9ed5ff 899 # It is advised to generate a default header using "doxygen -w html
rgrover1 980:07ce7d9ed5ff 900 # header.html footer.html stylesheet.css YourConfigFile" and then modify
rgrover1 980:07ce7d9ed5ff 901 # that header. Note that the header is subject to change so you typically
rgrover1 980:07ce7d9ed5ff 902 # have to redo this when upgrading to a newer version of doxygen or when
rgrover1 980:07ce7d9ed5ff 903 # changing the value of configuration settings such as GENERATE_TREEVIEW!
rgrover1 980:07ce7d9ed5ff 904
rgrover1 980:07ce7d9ed5ff 905 HTML_HEADER =
rgrover1 980:07ce7d9ed5ff 906
rgrover1 980:07ce7d9ed5ff 907 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
rgrover1 980:07ce7d9ed5ff 908 # each generated HTML page. If it is left blank doxygen will generate a
rgrover1 980:07ce7d9ed5ff 909 # standard footer.
rgrover1 980:07ce7d9ed5ff 910
rgrover1 980:07ce7d9ed5ff 911 HTML_FOOTER =
rgrover1 980:07ce7d9ed5ff 912
rgrover1 980:07ce7d9ed5ff 913 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
rgrover1 980:07ce7d9ed5ff 914 # style sheet that is used by each HTML page. It can be used to
rgrover1 980:07ce7d9ed5ff 915 # fine-tune the look of the HTML output. If left blank doxygen will
rgrover1 980:07ce7d9ed5ff 916 # generate a default style sheet. Note that it is recommended to use
rgrover1 980:07ce7d9ed5ff 917 # HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this
rgrover1 980:07ce7d9ed5ff 918 # tag will in the future become obsolete.
rgrover1 980:07ce7d9ed5ff 919
rgrover1 980:07ce7d9ed5ff 920 HTML_STYLESHEET =
rgrover1 980:07ce7d9ed5ff 921
rgrover1 980:07ce7d9ed5ff 922 # The HTML_EXTRA_STYLESHEET tag can be used to specify an additional
rgrover1 980:07ce7d9ed5ff 923 # user-defined cascading style sheet that is included after the standard
rgrover1 980:07ce7d9ed5ff 924 # style sheets created by doxygen. Using this option one can overrule
rgrover1 980:07ce7d9ed5ff 925 # certain style aspects. This is preferred over using HTML_STYLESHEET
rgrover1 980:07ce7d9ed5ff 926 # since it does not replace the standard style sheet and is therefor more
rgrover1 980:07ce7d9ed5ff 927 # robust against future updates. Doxygen will copy the style sheet file to
rgrover1 980:07ce7d9ed5ff 928 # the output directory.
rgrover1 980:07ce7d9ed5ff 929
rgrover1 980:07ce7d9ed5ff 930 HTML_EXTRA_STYLESHEET =
rgrover1 980:07ce7d9ed5ff 931
rgrover1 980:07ce7d9ed5ff 932 # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
rgrover1 980:07ce7d9ed5ff 933 # other source files which should be copied to the HTML output directory. Note
rgrover1 980:07ce7d9ed5ff 934 # that these files will be copied to the base HTML output directory. Use the
rgrover1 980:07ce7d9ed5ff 935 # $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
rgrover1 980:07ce7d9ed5ff 936 # files. In the HTML_STYLESHEET file, use the file name only. Also note that
rgrover1 980:07ce7d9ed5ff 937 # the files will be copied as-is; there are no commands or markers available.
rgrover1 980:07ce7d9ed5ff 938
rgrover1 980:07ce7d9ed5ff 939 HTML_EXTRA_FILES =
rgrover1 980:07ce7d9ed5ff 940
rgrover1 980:07ce7d9ed5ff 941 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
rgrover1 980:07ce7d9ed5ff 942 # Doxygen will adjust the colors in the style sheet and background images
rgrover1 980:07ce7d9ed5ff 943 # according to this color. Hue is specified as an angle on a colorwheel,
rgrover1 980:07ce7d9ed5ff 944 # see http://en.wikipedia.org/wiki/Hue for more information.
rgrover1 980:07ce7d9ed5ff 945 # For instance the value 0 represents red, 60 is yellow, 120 is green,
rgrover1 980:07ce7d9ed5ff 946 # 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
rgrover1 980:07ce7d9ed5ff 947 # The allowed range is 0 to 359.
rgrover1 980:07ce7d9ed5ff 948
rgrover1 980:07ce7d9ed5ff 949 HTML_COLORSTYLE_HUE = 220
rgrover1 980:07ce7d9ed5ff 950
rgrover1 980:07ce7d9ed5ff 951 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
rgrover1 980:07ce7d9ed5ff 952 # the colors in the HTML output. For a value of 0 the output will use
rgrover1 980:07ce7d9ed5ff 953 # grayscales only. A value of 255 will produce the most vivid colors.
rgrover1 980:07ce7d9ed5ff 954
rgrover1 980:07ce7d9ed5ff 955 HTML_COLORSTYLE_SAT = 100
rgrover1 980:07ce7d9ed5ff 956
rgrover1 980:07ce7d9ed5ff 957 # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
rgrover1 980:07ce7d9ed5ff 958 # the luminance component of the colors in the HTML output. Values below
rgrover1 980:07ce7d9ed5ff 959 # 100 gradually make the output lighter, whereas values above 100 make
rgrover1 980:07ce7d9ed5ff 960 # the output darker. The value divided by 100 is the actual gamma applied,
rgrover1 980:07ce7d9ed5ff 961 # so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
rgrover1 980:07ce7d9ed5ff 962 # and 100 does not change the gamma.
rgrover1 980:07ce7d9ed5ff 963
rgrover1 980:07ce7d9ed5ff 964 HTML_COLORSTYLE_GAMMA = 80
rgrover1 980:07ce7d9ed5ff 965
rgrover1 980:07ce7d9ed5ff 966 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
rgrover1 980:07ce7d9ed5ff 967 # page will contain the date and time when the page was generated. Setting
rgrover1 980:07ce7d9ed5ff 968 # this to NO can help when comparing the output of multiple runs.
rgrover1 980:07ce7d9ed5ff 969
rgrover1 980:07ce7d9ed5ff 970 HTML_TIMESTAMP = YES
rgrover1 980:07ce7d9ed5ff 971
rgrover1 980:07ce7d9ed5ff 972 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
rgrover1 980:07ce7d9ed5ff 973 # documentation will contain sections that can be hidden and shown after the
rgrover1 980:07ce7d9ed5ff 974 # page has loaded.
rgrover1 980:07ce7d9ed5ff 975
rgrover1 980:07ce7d9ed5ff 976 HTML_DYNAMIC_SECTIONS = NO
rgrover1 980:07ce7d9ed5ff 977
rgrover1 980:07ce7d9ed5ff 978 # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
rgrover1 980:07ce7d9ed5ff 979 # entries shown in the various tree structured indices initially; the user
rgrover1 980:07ce7d9ed5ff 980 # can expand and collapse entries dynamically later on. Doxygen will expand
rgrover1 980:07ce7d9ed5ff 981 # the tree to such a level that at most the specified number of entries are
rgrover1 980:07ce7d9ed5ff 982 # visible (unless a fully collapsed tree already exceeds this amount).
rgrover1 980:07ce7d9ed5ff 983 # So setting the number of entries 1 will produce a full collapsed tree by
rgrover1 980:07ce7d9ed5ff 984 # default. 0 is a special value representing an infinite number of entries
rgrover1 980:07ce7d9ed5ff 985 # and will result in a full expanded tree by default.
rgrover1 980:07ce7d9ed5ff 986
rgrover1 980:07ce7d9ed5ff 987 HTML_INDEX_NUM_ENTRIES = 100
rgrover1 980:07ce7d9ed5ff 988
rgrover1 980:07ce7d9ed5ff 989 # If the GENERATE_DOCSET tag is set to YES, additional index files
rgrover1 980:07ce7d9ed5ff 990 # will be generated that can be used as input for Apple's Xcode 3
rgrover1 980:07ce7d9ed5ff 991 # integrated development environment, introduced with OSX 10.5 (Leopard).
rgrover1 980:07ce7d9ed5ff 992 # To create a documentation set, doxygen will generate a Makefile in the
rgrover1 980:07ce7d9ed5ff 993 # HTML output directory. Running make will produce the docset in that
rgrover1 980:07ce7d9ed5ff 994 # directory and running "make install" will install the docset in
rgrover1 980:07ce7d9ed5ff 995 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
rgrover1 980:07ce7d9ed5ff 996 # it at startup.
rgrover1 980:07ce7d9ed5ff 997 # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
rgrover1 980:07ce7d9ed5ff 998 # for more information.
rgrover1 980:07ce7d9ed5ff 999
rgrover1 980:07ce7d9ed5ff 1000 GENERATE_DOCSET = NO
rgrover1 980:07ce7d9ed5ff 1001
rgrover1 980:07ce7d9ed5ff 1002 # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
rgrover1 980:07ce7d9ed5ff 1003 # feed. A documentation feed provides an umbrella under which multiple
rgrover1 980:07ce7d9ed5ff 1004 # documentation sets from a single provider (such as a company or product suite)
rgrover1 980:07ce7d9ed5ff 1005 # can be grouped.
rgrover1 980:07ce7d9ed5ff 1006
rgrover1 980:07ce7d9ed5ff 1007 DOCSET_FEEDNAME = "Doxygen generated docs"
rgrover1 980:07ce7d9ed5ff 1008
rgrover1 980:07ce7d9ed5ff 1009 # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
rgrover1 980:07ce7d9ed5ff 1010 # should uniquely identify the documentation set bundle. This should be a
rgrover1 980:07ce7d9ed5ff 1011 # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
rgrover1 980:07ce7d9ed5ff 1012 # will append .docset to the name.
rgrover1 980:07ce7d9ed5ff 1013
rgrover1 980:07ce7d9ed5ff 1014 DOCSET_BUNDLE_ID = org.doxygen.Project
rgrover1 980:07ce7d9ed5ff 1015
rgrover1 980:07ce7d9ed5ff 1016 # When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely
rgrover1 980:07ce7d9ed5ff 1017 # identify the documentation publisher. This should be a reverse domain-name
rgrover1 980:07ce7d9ed5ff 1018 # style string, e.g. com.mycompany.MyDocSet.documentation.
rgrover1 980:07ce7d9ed5ff 1019
rgrover1 980:07ce7d9ed5ff 1020 DOCSET_PUBLISHER_ID = org.doxygen.Publisher
rgrover1 980:07ce7d9ed5ff 1021
rgrover1 980:07ce7d9ed5ff 1022 # The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
rgrover1 980:07ce7d9ed5ff 1023
rgrover1 980:07ce7d9ed5ff 1024 DOCSET_PUBLISHER_NAME = Publisher
rgrover1 980:07ce7d9ed5ff 1025
rgrover1 980:07ce7d9ed5ff 1026 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
rgrover1 980:07ce7d9ed5ff 1027 # will be generated that can be used as input for tools like the
rgrover1 980:07ce7d9ed5ff 1028 # Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
rgrover1 980:07ce7d9ed5ff 1029 # of the generated HTML documentation.
rgrover1 980:07ce7d9ed5ff 1030
rgrover1 980:07ce7d9ed5ff 1031 GENERATE_HTMLHELP = NO
rgrover1 980:07ce7d9ed5ff 1032
rgrover1 980:07ce7d9ed5ff 1033 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
rgrover1 980:07ce7d9ed5ff 1034 # be used to specify the file name of the resulting .chm file. You
rgrover1 980:07ce7d9ed5ff 1035 # can add a path in front of the file if the result should not be
rgrover1 980:07ce7d9ed5ff 1036 # written to the html output directory.
rgrover1 980:07ce7d9ed5ff 1037
rgrover1 980:07ce7d9ed5ff 1038 CHM_FILE =
rgrover1 980:07ce7d9ed5ff 1039
rgrover1 980:07ce7d9ed5ff 1040 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
rgrover1 980:07ce7d9ed5ff 1041 # be used to specify the location (absolute path including file name) of
rgrover1 980:07ce7d9ed5ff 1042 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
rgrover1 980:07ce7d9ed5ff 1043 # the HTML help compiler on the generated index.hhp.
rgrover1 980:07ce7d9ed5ff 1044
rgrover1 980:07ce7d9ed5ff 1045 HHC_LOCATION =
rgrover1 980:07ce7d9ed5ff 1046
rgrover1 980:07ce7d9ed5ff 1047 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
rgrover1 980:07ce7d9ed5ff 1048 # controls if a separate .chi index file is generated (YES) or that
rgrover1 980:07ce7d9ed5ff 1049 # it should be included in the master .chm file (NO).
rgrover1 980:07ce7d9ed5ff 1050
rgrover1 980:07ce7d9ed5ff 1051 GENERATE_CHI = NO
rgrover1 980:07ce7d9ed5ff 1052
rgrover1 980:07ce7d9ed5ff 1053 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
rgrover1 980:07ce7d9ed5ff 1054 # is used to encode HtmlHelp index (hhk), content (hhc) and project file
rgrover1 980:07ce7d9ed5ff 1055 # content.
rgrover1 980:07ce7d9ed5ff 1056
rgrover1 980:07ce7d9ed5ff 1057 CHM_INDEX_ENCODING =
rgrover1 980:07ce7d9ed5ff 1058
rgrover1 980:07ce7d9ed5ff 1059 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
rgrover1 980:07ce7d9ed5ff 1060 # controls whether a binary table of contents is generated (YES) or a
rgrover1 980:07ce7d9ed5ff 1061 # normal table of contents (NO) in the .chm file.
rgrover1 980:07ce7d9ed5ff 1062
rgrover1 980:07ce7d9ed5ff 1063 BINARY_TOC = NO
rgrover1 980:07ce7d9ed5ff 1064
rgrover1 980:07ce7d9ed5ff 1065 # The TOC_EXPAND flag can be set to YES to add extra items for group members
rgrover1 980:07ce7d9ed5ff 1066 # to the contents of the HTML help documentation and to the tree view.
rgrover1 980:07ce7d9ed5ff 1067
rgrover1 980:07ce7d9ed5ff 1068 TOC_EXPAND = NO
rgrover1 980:07ce7d9ed5ff 1069
rgrover1 980:07ce7d9ed5ff 1070 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
rgrover1 980:07ce7d9ed5ff 1071 # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
rgrover1 980:07ce7d9ed5ff 1072 # that can be used as input for Qt's qhelpgenerator to generate a
rgrover1 980:07ce7d9ed5ff 1073 # Qt Compressed Help (.qch) of the generated HTML documentation.
rgrover1 980:07ce7d9ed5ff 1074
rgrover1 980:07ce7d9ed5ff 1075 GENERATE_QHP = NO
rgrover1 980:07ce7d9ed5ff 1076
rgrover1 980:07ce7d9ed5ff 1077 # If the QHG_LOCATION tag is specified, the QCH_FILE tag can
rgrover1 980:07ce7d9ed5ff 1078 # be used to specify the file name of the resulting .qch file.
rgrover1 980:07ce7d9ed5ff 1079 # The path specified is relative to the HTML output folder.
rgrover1 980:07ce7d9ed5ff 1080
rgrover1 980:07ce7d9ed5ff 1081 QCH_FILE =
rgrover1 980:07ce7d9ed5ff 1082
rgrover1 980:07ce7d9ed5ff 1083 # The QHP_NAMESPACE tag specifies the namespace to use when generating
rgrover1 980:07ce7d9ed5ff 1084 # Qt Help Project output. For more information please see
rgrover1 980:07ce7d9ed5ff 1085 # http://doc.trolltech.com/qthelpproject.html#namespace
rgrover1 980:07ce7d9ed5ff 1086
rgrover1 980:07ce7d9ed5ff 1087 QHP_NAMESPACE = org.doxygen.Project
rgrover1 980:07ce7d9ed5ff 1088
rgrover1 980:07ce7d9ed5ff 1089 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
rgrover1 980:07ce7d9ed5ff 1090 # Qt Help Project output. For more information please see
rgrover1 980:07ce7d9ed5ff 1091 # http://doc.trolltech.com/qthelpproject.html#virtual-folders
rgrover1 980:07ce7d9ed5ff 1092
rgrover1 980:07ce7d9ed5ff 1093 QHP_VIRTUAL_FOLDER = doc
rgrover1 980:07ce7d9ed5ff 1094
rgrover1 980:07ce7d9ed5ff 1095 # If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
rgrover1 980:07ce7d9ed5ff 1096 # add. For more information please see
rgrover1 980:07ce7d9ed5ff 1097 # http://doc.trolltech.com/qthelpproject.html#custom-filters
rgrover1 980:07ce7d9ed5ff 1098
rgrover1 980:07ce7d9ed5ff 1099 QHP_CUST_FILTER_NAME =
rgrover1 980:07ce7d9ed5ff 1100
rgrover1 980:07ce7d9ed5ff 1101 # The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
rgrover1 980:07ce7d9ed5ff 1102 # custom filter to add. For more information please see
rgrover1 980:07ce7d9ed5ff 1103 # <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
rgrover1 980:07ce7d9ed5ff 1104 # Qt Help Project / Custom Filters</a>.
rgrover1 980:07ce7d9ed5ff 1105
rgrover1 980:07ce7d9ed5ff 1106 QHP_CUST_FILTER_ATTRS =
rgrover1 980:07ce7d9ed5ff 1107
rgrover1 980:07ce7d9ed5ff 1108 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
rgrover1 980:07ce7d9ed5ff 1109 # project's
rgrover1 980:07ce7d9ed5ff 1110 # filter section matches.
rgrover1 980:07ce7d9ed5ff 1111 # <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
rgrover1 980:07ce7d9ed5ff 1112 # Qt Help Project / Filter Attributes</a>.
rgrover1 980:07ce7d9ed5ff 1113
rgrover1 980:07ce7d9ed5ff 1114 QHP_SECT_FILTER_ATTRS =
rgrover1 980:07ce7d9ed5ff 1115
rgrover1 980:07ce7d9ed5ff 1116 # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
rgrover1 980:07ce7d9ed5ff 1117 # be used to specify the location of Qt's qhelpgenerator.
rgrover1 980:07ce7d9ed5ff 1118 # If non-empty doxygen will try to run qhelpgenerator on the generated
rgrover1 980:07ce7d9ed5ff 1119 # .qhp file.
rgrover1 980:07ce7d9ed5ff 1120
rgrover1 980:07ce7d9ed5ff 1121 QHG_LOCATION =
rgrover1 980:07ce7d9ed5ff 1122
rgrover1 980:07ce7d9ed5ff 1123 # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
rgrover1 980:07ce7d9ed5ff 1124 # will be generated, which together with the HTML files, form an Eclipse help
rgrover1 980:07ce7d9ed5ff 1125 # plugin. To install this plugin and make it available under the help contents
rgrover1 980:07ce7d9ed5ff 1126 # menu in Eclipse, the contents of the directory containing the HTML and XML
rgrover1 980:07ce7d9ed5ff 1127 # files needs to be copied into the plugins directory of eclipse. The name of
rgrover1 980:07ce7d9ed5ff 1128 # the directory within the plugins directory should be the same as
rgrover1 980:07ce7d9ed5ff 1129 # the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
rgrover1 980:07ce7d9ed5ff 1130 # the help appears.
rgrover1 980:07ce7d9ed5ff 1131
rgrover1 980:07ce7d9ed5ff 1132 GENERATE_ECLIPSEHELP = NO
rgrover1 980:07ce7d9ed5ff 1133
rgrover1 980:07ce7d9ed5ff 1134 # A unique identifier for the eclipse help plugin. When installing the plugin
rgrover1 980:07ce7d9ed5ff 1135 # the directory name containing the HTML and XML files should also have
rgrover1 980:07ce7d9ed5ff 1136 # this name.
rgrover1 980:07ce7d9ed5ff 1137
rgrover1 980:07ce7d9ed5ff 1138 ECLIPSE_DOC_ID = org.doxygen.Project
rgrover1 980:07ce7d9ed5ff 1139
rgrover1 980:07ce7d9ed5ff 1140 # The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
rgrover1 980:07ce7d9ed5ff 1141 # at top of each HTML page. The value NO (the default) enables the index and
rgrover1 980:07ce7d9ed5ff 1142 # the value YES disables it. Since the tabs have the same information as the
rgrover1 980:07ce7d9ed5ff 1143 # navigation tree you can set this option to NO if you already set
rgrover1 980:07ce7d9ed5ff 1144 # GENERATE_TREEVIEW to YES.
rgrover1 980:07ce7d9ed5ff 1145
rgrover1 980:07ce7d9ed5ff 1146 DISABLE_INDEX = NO
rgrover1 980:07ce7d9ed5ff 1147
rgrover1 980:07ce7d9ed5ff 1148 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
rgrover1 980:07ce7d9ed5ff 1149 # structure should be generated to display hierarchical information.
rgrover1 980:07ce7d9ed5ff 1150 # If the tag value is set to YES, a side panel will be generated
rgrover1 980:07ce7d9ed5ff 1151 # containing a tree-like index structure (just like the one that
rgrover1 980:07ce7d9ed5ff 1152 # is generated for HTML Help). For this to work a browser that supports
rgrover1 980:07ce7d9ed5ff 1153 # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
rgrover1 980:07ce7d9ed5ff 1154 # Windows users are probably better off using the HTML help feature.
rgrover1 980:07ce7d9ed5ff 1155 # Since the tree basically has the same information as the tab index you
rgrover1 980:07ce7d9ed5ff 1156 # could consider to set DISABLE_INDEX to NO when enabling this option.
rgrover1 980:07ce7d9ed5ff 1157
rgrover1 980:07ce7d9ed5ff 1158 GENERATE_TREEVIEW = NO
rgrover1 980:07ce7d9ed5ff 1159
rgrover1 980:07ce7d9ed5ff 1160 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
rgrover1 980:07ce7d9ed5ff 1161 # (range [0,1..20]) that doxygen will group on one line in the generated HTML
rgrover1 980:07ce7d9ed5ff 1162 # documentation. Note that a value of 0 will completely suppress the enum
rgrover1 980:07ce7d9ed5ff 1163 # values from appearing in the overview section.
rgrover1 980:07ce7d9ed5ff 1164
rgrover1 980:07ce7d9ed5ff 1165 ENUM_VALUES_PER_LINE = 4
rgrover1 980:07ce7d9ed5ff 1166
rgrover1 980:07ce7d9ed5ff 1167 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
rgrover1 980:07ce7d9ed5ff 1168 # used to set the initial width (in pixels) of the frame in which the tree
rgrover1 980:07ce7d9ed5ff 1169 # is shown.
rgrover1 980:07ce7d9ed5ff 1170
rgrover1 980:07ce7d9ed5ff 1171 TREEVIEW_WIDTH = 250
rgrover1 980:07ce7d9ed5ff 1172
rgrover1 980:07ce7d9ed5ff 1173 # When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
rgrover1 980:07ce7d9ed5ff 1174 # links to external symbols imported via tag files in a separate window.
rgrover1 980:07ce7d9ed5ff 1175
rgrover1 980:07ce7d9ed5ff 1176 EXT_LINKS_IN_WINDOW = NO
rgrover1 980:07ce7d9ed5ff 1177
rgrover1 980:07ce7d9ed5ff 1178 # Use this tag to change the font size of Latex formulas included
rgrover1 980:07ce7d9ed5ff 1179 # as images in the HTML documentation. The default is 10. Note that
rgrover1 980:07ce7d9ed5ff 1180 # when you change the font size after a successful doxygen run you need
rgrover1 980:07ce7d9ed5ff 1181 # to manually remove any form_*.png images from the HTML output directory
rgrover1 980:07ce7d9ed5ff 1182 # to force them to be regenerated.
rgrover1 980:07ce7d9ed5ff 1183
rgrover1 980:07ce7d9ed5ff 1184 FORMULA_FONTSIZE = 10
rgrover1 980:07ce7d9ed5ff 1185
rgrover1 980:07ce7d9ed5ff 1186 # Use the FORMULA_TRANPARENT tag to determine whether or not the images
rgrover1 980:07ce7d9ed5ff 1187 # generated for formulas are transparent PNGs. Transparent PNGs are
rgrover1 980:07ce7d9ed5ff 1188 # not supported properly for IE 6.0, but are supported on all modern browsers.
rgrover1 980:07ce7d9ed5ff 1189 # Note that when changing this option you need to delete any form_*.png files
rgrover1 980:07ce7d9ed5ff 1190 # in the HTML output before the changes have effect.
rgrover1 980:07ce7d9ed5ff 1191
rgrover1 980:07ce7d9ed5ff 1192 FORMULA_TRANSPARENT = YES
rgrover1 980:07ce7d9ed5ff 1193
rgrover1 980:07ce7d9ed5ff 1194 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
rgrover1 980:07ce7d9ed5ff 1195 # (see http://www.mathjax.org) which uses client side Javascript for the
rgrover1 980:07ce7d9ed5ff 1196 # rendering instead of using prerendered bitmaps. Use this if you do not
rgrover1 980:07ce7d9ed5ff 1197 # have LaTeX installed or if you want to formulas look prettier in the HTML
rgrover1 980:07ce7d9ed5ff 1198 # output. When enabled you may also need to install MathJax separately and
rgrover1 980:07ce7d9ed5ff 1199 # configure the path to it using the MATHJAX_RELPATH option.
rgrover1 980:07ce7d9ed5ff 1200
rgrover1 980:07ce7d9ed5ff 1201 USE_MATHJAX = NO
rgrover1 980:07ce7d9ed5ff 1202
rgrover1 980:07ce7d9ed5ff 1203 # When MathJax is enabled you can set the default output format to be used for
rgrover1 980:07ce7d9ed5ff 1204 # the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and
rgrover1 980:07ce7d9ed5ff 1205 # SVG. The default value is HTML-CSS, which is slower, but has the best
rgrover1 980:07ce7d9ed5ff 1206 # compatibility.
rgrover1 980:07ce7d9ed5ff 1207
rgrover1 980:07ce7d9ed5ff 1208 MATHJAX_FORMAT = HTML-CSS
rgrover1 980:07ce7d9ed5ff 1209
rgrover1 980:07ce7d9ed5ff 1210 # When MathJax is enabled you need to specify the location relative to the
rgrover1 980:07ce7d9ed5ff 1211 # HTML output directory using the MATHJAX_RELPATH option. The destination
rgrover1 980:07ce7d9ed5ff 1212 # directory should contain the MathJax.js script. For instance, if the mathjax
rgrover1 980:07ce7d9ed5ff 1213 # directory is located at the same level as the HTML output directory, then
rgrover1 980:07ce7d9ed5ff 1214 # MATHJAX_RELPATH should be ../mathjax. The default value points to
rgrover1 980:07ce7d9ed5ff 1215 # the MathJax Content Delivery Network so you can quickly see the result without
rgrover1 980:07ce7d9ed5ff 1216 # installing MathJax.
rgrover1 980:07ce7d9ed5ff 1217 # However, it is strongly recommended to install a local
rgrover1 980:07ce7d9ed5ff 1218 # copy of MathJax from http://www.mathjax.org before deployment.
rgrover1 980:07ce7d9ed5ff 1219
rgrover1 980:07ce7d9ed5ff 1220 MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
rgrover1 980:07ce7d9ed5ff 1221
rgrover1 980:07ce7d9ed5ff 1222 # The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
rgrover1 980:07ce7d9ed5ff 1223 # names that should be enabled during MathJax rendering.
rgrover1 980:07ce7d9ed5ff 1224
rgrover1 980:07ce7d9ed5ff 1225 MATHJAX_EXTENSIONS =
rgrover1 980:07ce7d9ed5ff 1226
rgrover1 980:07ce7d9ed5ff 1227 # The MATHJAX_CODEFILE tag can be used to specify a file with javascript
rgrover1 980:07ce7d9ed5ff 1228 # pieces of code that will be used on startup of the MathJax code.
rgrover1 980:07ce7d9ed5ff 1229
rgrover1 980:07ce7d9ed5ff 1230 MATHJAX_CODEFILE =
rgrover1 980:07ce7d9ed5ff 1231
rgrover1 980:07ce7d9ed5ff 1232 # When the SEARCHENGINE tag is enabled doxygen will generate a search box
rgrover1 980:07ce7d9ed5ff 1233 # for the HTML output. The underlying search engine uses javascript
rgrover1 980:07ce7d9ed5ff 1234 # and DHTML and should work on any modern browser. Note that when using
rgrover1 980:07ce7d9ed5ff 1235 # HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
rgrover1 980:07ce7d9ed5ff 1236 # (GENERATE_DOCSET) there is already a search function so this one should
rgrover1 980:07ce7d9ed5ff 1237 # typically be disabled. For large projects the javascript based search engine
rgrover1 980:07ce7d9ed5ff 1238 # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
rgrover1 980:07ce7d9ed5ff 1239
rgrover1 980:07ce7d9ed5ff 1240 SEARCHENGINE = NO
rgrover1 980:07ce7d9ed5ff 1241
rgrover1 980:07ce7d9ed5ff 1242 # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
rgrover1 980:07ce7d9ed5ff 1243 # implemented using a web server instead of a web client using Javascript.
rgrover1 980:07ce7d9ed5ff 1244 # There are two flavours of web server based search depending on the
rgrover1 980:07ce7d9ed5ff 1245 # EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for
rgrover1 980:07ce7d9ed5ff 1246 # searching and an index file used by the script. When EXTERNAL_SEARCH is
rgrover1 980:07ce7d9ed5ff 1247 # enabled the indexing and searching needs to be provided by external tools.
rgrover1 980:07ce7d9ed5ff 1248 # See the manual for details.
rgrover1 980:07ce7d9ed5ff 1249
rgrover1 980:07ce7d9ed5ff 1250 SERVER_BASED_SEARCH = NO
rgrover1 980:07ce7d9ed5ff 1251
rgrover1 980:07ce7d9ed5ff 1252 # When EXTERNAL_SEARCH is enabled doxygen will no longer generate the PHP
rgrover1 980:07ce7d9ed5ff 1253 # script for searching. Instead the search results are written to an XML file
rgrover1 980:07ce7d9ed5ff 1254 # which needs to be processed by an external indexer. Doxygen will invoke an
rgrover1 980:07ce7d9ed5ff 1255 # external search engine pointed to by the SEARCHENGINE_URL option to obtain
rgrover1 980:07ce7d9ed5ff 1256 # the search results. Doxygen ships with an example indexer (doxyindexer) and
rgrover1 980:07ce7d9ed5ff 1257 # search engine (doxysearch.cgi) which are based on the open source search
rgrover1 980:07ce7d9ed5ff 1258 # engine library Xapian. See the manual for configuration details.
rgrover1 980:07ce7d9ed5ff 1259
rgrover1 980:07ce7d9ed5ff 1260 EXTERNAL_SEARCH = NO
rgrover1 980:07ce7d9ed5ff 1261
rgrover1 980:07ce7d9ed5ff 1262 # The SEARCHENGINE_URL should point to a search engine hosted by a web server
rgrover1 980:07ce7d9ed5ff 1263 # which will returned the search results when EXTERNAL_SEARCH is enabled.
rgrover1 980:07ce7d9ed5ff 1264 # Doxygen ships with an example search engine (doxysearch) which is based on
rgrover1 980:07ce7d9ed5ff 1265 # the open source search engine library Xapian. See the manual for configuration
rgrover1 980:07ce7d9ed5ff 1266 # details.
rgrover1 980:07ce7d9ed5ff 1267
rgrover1 980:07ce7d9ed5ff 1268 SEARCHENGINE_URL =
rgrover1 980:07ce7d9ed5ff 1269
rgrover1 980:07ce7d9ed5ff 1270 # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
rgrover1 980:07ce7d9ed5ff 1271 # search data is written to a file for indexing by an external tool. With the
rgrover1 980:07ce7d9ed5ff 1272 # SEARCHDATA_FILE tag the name of this file can be specified.
rgrover1 980:07ce7d9ed5ff 1273
rgrover1 980:07ce7d9ed5ff 1274 SEARCHDATA_FILE = searchdata.xml
rgrover1 980:07ce7d9ed5ff 1275
rgrover1 980:07ce7d9ed5ff 1276 # When SERVER_BASED_SEARCH AND EXTERNAL_SEARCH are both enabled the
rgrover1 980:07ce7d9ed5ff 1277 # EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
rgrover1 980:07ce7d9ed5ff 1278 # useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
rgrover1 980:07ce7d9ed5ff 1279 # projects and redirect the results back to the right project.
rgrover1 980:07ce7d9ed5ff 1280
rgrover1 980:07ce7d9ed5ff 1281 EXTERNAL_SEARCH_ID =
rgrover1 980:07ce7d9ed5ff 1282
rgrover1 980:07ce7d9ed5ff 1283 # The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
rgrover1 980:07ce7d9ed5ff 1284 # projects other than the one defined by this configuration file, but that are
rgrover1 980:07ce7d9ed5ff 1285 # all added to the same external search index. Each project needs to have a
rgrover1 980:07ce7d9ed5ff 1286 # unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id
rgrover1 980:07ce7d9ed5ff 1287 # of to a relative location where the documentation can be found.
rgrover1 980:07ce7d9ed5ff 1288 # The format is: EXTRA_SEARCH_MAPPINGS = id1=loc1 id2=loc2 ...
rgrover1 980:07ce7d9ed5ff 1289
rgrover1 980:07ce7d9ed5ff 1290 EXTRA_SEARCH_MAPPINGS =
rgrover1 980:07ce7d9ed5ff 1291
rgrover1 980:07ce7d9ed5ff 1292 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1293 # configuration options related to the LaTeX output
rgrover1 980:07ce7d9ed5ff 1294 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1295
rgrover1 980:07ce7d9ed5ff 1296 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 1297 # generate Latex output.
rgrover1 980:07ce7d9ed5ff 1298
rgrover1 980:07ce7d9ed5ff 1299 GENERATE_LATEX = NO
rgrover1 980:07ce7d9ed5ff 1300
rgrover1 980:07ce7d9ed5ff 1301 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
rgrover1 980:07ce7d9ed5ff 1302 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
rgrover1 980:07ce7d9ed5ff 1303 # put in front of it. If left blank `latex' will be used as the default path.
rgrover1 980:07ce7d9ed5ff 1304
rgrover1 980:07ce7d9ed5ff 1305 LATEX_OUTPUT = latex
rgrover1 980:07ce7d9ed5ff 1306
rgrover1 980:07ce7d9ed5ff 1307 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
rgrover1 980:07ce7d9ed5ff 1308 # invoked. If left blank `latex' will be used as the default command name.
rgrover1 980:07ce7d9ed5ff 1309 # Note that when enabling USE_PDFLATEX this option is only used for
rgrover1 980:07ce7d9ed5ff 1310 # generating bitmaps for formulas in the HTML output, but not in the
rgrover1 980:07ce7d9ed5ff 1311 # Makefile that is written to the output directory.
rgrover1 980:07ce7d9ed5ff 1312
rgrover1 980:07ce7d9ed5ff 1313 LATEX_CMD_NAME = latex
rgrover1 980:07ce7d9ed5ff 1314
rgrover1 980:07ce7d9ed5ff 1315 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
rgrover1 980:07ce7d9ed5ff 1316 # generate index for LaTeX. If left blank `makeindex' will be used as the
rgrover1 980:07ce7d9ed5ff 1317 # default command name.
rgrover1 980:07ce7d9ed5ff 1318
rgrover1 980:07ce7d9ed5ff 1319 MAKEINDEX_CMD_NAME = makeindex
rgrover1 980:07ce7d9ed5ff 1320
rgrover1 980:07ce7d9ed5ff 1321 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
rgrover1 980:07ce7d9ed5ff 1322 # LaTeX documents. This may be useful for small projects and may help to
rgrover1 980:07ce7d9ed5ff 1323 # save some trees in general.
rgrover1 980:07ce7d9ed5ff 1324
rgrover1 980:07ce7d9ed5ff 1325 COMPACT_LATEX = YES
rgrover1 980:07ce7d9ed5ff 1326
rgrover1 980:07ce7d9ed5ff 1327 # The PAPER_TYPE tag can be used to set the paper type that is used
rgrover1 980:07ce7d9ed5ff 1328 # by the printer. Possible values are: a4, letter, legal and
rgrover1 980:07ce7d9ed5ff 1329 # executive. If left blank a4 will be used.
rgrover1 980:07ce7d9ed5ff 1330
rgrover1 980:07ce7d9ed5ff 1331 PAPER_TYPE = a4wide
rgrover1 980:07ce7d9ed5ff 1332
rgrover1 980:07ce7d9ed5ff 1333 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
rgrover1 980:07ce7d9ed5ff 1334 # packages that should be included in the LaTeX output.
rgrover1 980:07ce7d9ed5ff 1335
rgrover1 980:07ce7d9ed5ff 1336 EXTRA_PACKAGES =
rgrover1 980:07ce7d9ed5ff 1337
rgrover1 980:07ce7d9ed5ff 1338 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
rgrover1 980:07ce7d9ed5ff 1339 # the generated latex document. The header should contain everything until
rgrover1 980:07ce7d9ed5ff 1340 # the first chapter. If it is left blank doxygen will generate a
rgrover1 980:07ce7d9ed5ff 1341 # standard header. Notice: only use this tag if you know what you are doing!
rgrover1 980:07ce7d9ed5ff 1342
rgrover1 980:07ce7d9ed5ff 1343 LATEX_HEADER =
rgrover1 980:07ce7d9ed5ff 1344
rgrover1 980:07ce7d9ed5ff 1345 # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
rgrover1 980:07ce7d9ed5ff 1346 # the generated latex document. The footer should contain everything after
rgrover1 980:07ce7d9ed5ff 1347 # the last chapter. If it is left blank doxygen will generate a
rgrover1 980:07ce7d9ed5ff 1348 # standard footer. Notice: only use this tag if you know what you are doing!
rgrover1 980:07ce7d9ed5ff 1349
rgrover1 980:07ce7d9ed5ff 1350 LATEX_FOOTER =
rgrover1 980:07ce7d9ed5ff 1351
rgrover1 980:07ce7d9ed5ff 1352 # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images
rgrover1 980:07ce7d9ed5ff 1353 # or other source files which should be copied to the LaTeX output directory.
rgrover1 980:07ce7d9ed5ff 1354 # Note that the files will be copied as-is; there are no commands or markers
rgrover1 980:07ce7d9ed5ff 1355 # available.
rgrover1 980:07ce7d9ed5ff 1356
rgrover1 980:07ce7d9ed5ff 1357 LATEX_EXTRA_FILES =
rgrover1 980:07ce7d9ed5ff 1358
rgrover1 980:07ce7d9ed5ff 1359 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
rgrover1 980:07ce7d9ed5ff 1360 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
rgrover1 980:07ce7d9ed5ff 1361 # contain links (just like the HTML output) instead of page references
rgrover1 980:07ce7d9ed5ff 1362 # This makes the output suitable for online browsing using a pdf viewer.
rgrover1 980:07ce7d9ed5ff 1363
rgrover1 980:07ce7d9ed5ff 1364 PDF_HYPERLINKS = YES
rgrover1 980:07ce7d9ed5ff 1365
rgrover1 980:07ce7d9ed5ff 1366 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
rgrover1 980:07ce7d9ed5ff 1367 # plain latex in the generated Makefile. Set this option to YES to get a
rgrover1 980:07ce7d9ed5ff 1368 # higher quality PDF documentation.
rgrover1 980:07ce7d9ed5ff 1369
rgrover1 980:07ce7d9ed5ff 1370 USE_PDFLATEX = YES
rgrover1 980:07ce7d9ed5ff 1371
rgrover1 980:07ce7d9ed5ff 1372 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
rgrover1 980:07ce7d9ed5ff 1373 # command to the generated LaTeX files. This will instruct LaTeX to keep
rgrover1 980:07ce7d9ed5ff 1374 # running if errors occur, instead of asking the user for help.
rgrover1 980:07ce7d9ed5ff 1375 # This option is also used when generating formulas in HTML.
rgrover1 980:07ce7d9ed5ff 1376
rgrover1 980:07ce7d9ed5ff 1377 LATEX_BATCHMODE = NO
rgrover1 980:07ce7d9ed5ff 1378
rgrover1 980:07ce7d9ed5ff 1379 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
rgrover1 980:07ce7d9ed5ff 1380 # include the index chapters (such as File Index, Compound Index, etc.)
rgrover1 980:07ce7d9ed5ff 1381 # in the output.
rgrover1 980:07ce7d9ed5ff 1382
rgrover1 980:07ce7d9ed5ff 1383 LATEX_HIDE_INDICES = NO
rgrover1 980:07ce7d9ed5ff 1384
rgrover1 980:07ce7d9ed5ff 1385 # If LATEX_SOURCE_CODE is set to YES then doxygen will include
rgrover1 980:07ce7d9ed5ff 1386 # source code with syntax highlighting in the LaTeX output.
rgrover1 980:07ce7d9ed5ff 1387 # Note that which sources are shown also depends on other settings
rgrover1 980:07ce7d9ed5ff 1388 # such as SOURCE_BROWSER.
rgrover1 980:07ce7d9ed5ff 1389
rgrover1 980:07ce7d9ed5ff 1390 LATEX_SOURCE_CODE = NO
rgrover1 980:07ce7d9ed5ff 1391
rgrover1 980:07ce7d9ed5ff 1392 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
rgrover1 980:07ce7d9ed5ff 1393 # bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
rgrover1 980:07ce7d9ed5ff 1394 # http://en.wikipedia.org/wiki/BibTeX for more info.
rgrover1 980:07ce7d9ed5ff 1395
rgrover1 980:07ce7d9ed5ff 1396 LATEX_BIB_STYLE = plain
rgrover1 980:07ce7d9ed5ff 1397
rgrover1 980:07ce7d9ed5ff 1398 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1399 # configuration options related to the RTF output
rgrover1 980:07ce7d9ed5ff 1400 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1401
rgrover1 980:07ce7d9ed5ff 1402 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
rgrover1 980:07ce7d9ed5ff 1403 # The RTF output is optimized for Word 97 and may not look very pretty with
rgrover1 980:07ce7d9ed5ff 1404 # other RTF readers or editors.
rgrover1 980:07ce7d9ed5ff 1405
rgrover1 980:07ce7d9ed5ff 1406 GENERATE_RTF = NO
rgrover1 980:07ce7d9ed5ff 1407
rgrover1 980:07ce7d9ed5ff 1408 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
rgrover1 980:07ce7d9ed5ff 1409 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
rgrover1 980:07ce7d9ed5ff 1410 # put in front of it. If left blank `rtf' will be used as the default path.
rgrover1 980:07ce7d9ed5ff 1411
rgrover1 980:07ce7d9ed5ff 1412 RTF_OUTPUT = rtf
rgrover1 980:07ce7d9ed5ff 1413
rgrover1 980:07ce7d9ed5ff 1414 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
rgrover1 980:07ce7d9ed5ff 1415 # RTF documents. This may be useful for small projects and may help to
rgrover1 980:07ce7d9ed5ff 1416 # save some trees in general.
rgrover1 980:07ce7d9ed5ff 1417
rgrover1 980:07ce7d9ed5ff 1418 COMPACT_RTF = NO
rgrover1 980:07ce7d9ed5ff 1419
rgrover1 980:07ce7d9ed5ff 1420 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
rgrover1 980:07ce7d9ed5ff 1421 # will contain hyperlink fields. The RTF file will
rgrover1 980:07ce7d9ed5ff 1422 # contain links (just like the HTML output) instead of page references.
rgrover1 980:07ce7d9ed5ff 1423 # This makes the output suitable for online browsing using WORD or other
rgrover1 980:07ce7d9ed5ff 1424 # programs which support those fields.
rgrover1 980:07ce7d9ed5ff 1425 # Note: wordpad (write) and others do not support links.
rgrover1 980:07ce7d9ed5ff 1426
rgrover1 980:07ce7d9ed5ff 1427 RTF_HYPERLINKS = NO
rgrover1 980:07ce7d9ed5ff 1428
rgrover1 980:07ce7d9ed5ff 1429 # Load style sheet definitions from file. Syntax is similar to doxygen's
rgrover1 980:07ce7d9ed5ff 1430 # config file, i.e. a series of assignments. You only have to provide
rgrover1 980:07ce7d9ed5ff 1431 # replacements, missing definitions are set to their default value.
rgrover1 980:07ce7d9ed5ff 1432
rgrover1 980:07ce7d9ed5ff 1433 RTF_STYLESHEET_FILE =
rgrover1 980:07ce7d9ed5ff 1434
rgrover1 980:07ce7d9ed5ff 1435 # Set optional variables used in the generation of an rtf document.
rgrover1 980:07ce7d9ed5ff 1436 # Syntax is similar to doxygen's config file.
rgrover1 980:07ce7d9ed5ff 1437
rgrover1 980:07ce7d9ed5ff 1438 RTF_EXTENSIONS_FILE =
rgrover1 980:07ce7d9ed5ff 1439
rgrover1 980:07ce7d9ed5ff 1440 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1441 # configuration options related to the man page output
rgrover1 980:07ce7d9ed5ff 1442 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1443
rgrover1 980:07ce7d9ed5ff 1444 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 1445 # generate man pages
rgrover1 980:07ce7d9ed5ff 1446
rgrover1 980:07ce7d9ed5ff 1447 GENERATE_MAN = NO
rgrover1 980:07ce7d9ed5ff 1448
rgrover1 980:07ce7d9ed5ff 1449 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
rgrover1 980:07ce7d9ed5ff 1450 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
rgrover1 980:07ce7d9ed5ff 1451 # put in front of it. If left blank `man' will be used as the default path.
rgrover1 980:07ce7d9ed5ff 1452
rgrover1 980:07ce7d9ed5ff 1453 MAN_OUTPUT = man
rgrover1 980:07ce7d9ed5ff 1454
rgrover1 980:07ce7d9ed5ff 1455 # The MAN_EXTENSION tag determines the extension that is added to
rgrover1 980:07ce7d9ed5ff 1456 # the generated man pages (default is the subroutine's section .3)
rgrover1 980:07ce7d9ed5ff 1457
rgrover1 980:07ce7d9ed5ff 1458 MAN_EXTENSION = .3
rgrover1 980:07ce7d9ed5ff 1459
rgrover1 980:07ce7d9ed5ff 1460 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
rgrover1 980:07ce7d9ed5ff 1461 # then it will generate one additional man file for each entity
rgrover1 980:07ce7d9ed5ff 1462 # documented in the real man page(s). These additional files
rgrover1 980:07ce7d9ed5ff 1463 # only source the real man page, but without them the man command
rgrover1 980:07ce7d9ed5ff 1464 # would be unable to find the correct page. The default is NO.
rgrover1 980:07ce7d9ed5ff 1465
rgrover1 980:07ce7d9ed5ff 1466 MAN_LINKS = NO
rgrover1 980:07ce7d9ed5ff 1467
rgrover1 980:07ce7d9ed5ff 1468 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1469 # configuration options related to the XML output
rgrover1 980:07ce7d9ed5ff 1470 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1471
rgrover1 980:07ce7d9ed5ff 1472 # If the GENERATE_XML tag is set to YES Doxygen will
rgrover1 980:07ce7d9ed5ff 1473 # generate an XML file that captures the structure of
rgrover1 980:07ce7d9ed5ff 1474 # the code including all documentation.
rgrover1 980:07ce7d9ed5ff 1475
rgrover1 980:07ce7d9ed5ff 1476 GENERATE_XML = NO
rgrover1 980:07ce7d9ed5ff 1477
rgrover1 980:07ce7d9ed5ff 1478 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
rgrover1 980:07ce7d9ed5ff 1479 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
rgrover1 980:07ce7d9ed5ff 1480 # put in front of it. If left blank `xml' will be used as the default path.
rgrover1 980:07ce7d9ed5ff 1481
rgrover1 980:07ce7d9ed5ff 1482 XML_OUTPUT = xml
rgrover1 980:07ce7d9ed5ff 1483
rgrover1 980:07ce7d9ed5ff 1484 # The XML_SCHEMA tag can be used to specify an XML schema,
rgrover1 980:07ce7d9ed5ff 1485 # which can be used by a validating XML parser to check the
rgrover1 980:07ce7d9ed5ff 1486 # syntax of the XML files.
rgrover1 980:07ce7d9ed5ff 1487
rgrover1 980:07ce7d9ed5ff 1488 XML_SCHEMA =
rgrover1 980:07ce7d9ed5ff 1489
rgrover1 980:07ce7d9ed5ff 1490 # The XML_DTD tag can be used to specify an XML DTD,
rgrover1 980:07ce7d9ed5ff 1491 # which can be used by a validating XML parser to check the
rgrover1 980:07ce7d9ed5ff 1492 # syntax of the XML files.
rgrover1 980:07ce7d9ed5ff 1493
rgrover1 980:07ce7d9ed5ff 1494 XML_DTD =
rgrover1 980:07ce7d9ed5ff 1495
rgrover1 980:07ce7d9ed5ff 1496 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
rgrover1 980:07ce7d9ed5ff 1497 # dump the program listings (including syntax highlighting
rgrover1 980:07ce7d9ed5ff 1498 # and cross-referencing information) to the XML output. Note that
rgrover1 980:07ce7d9ed5ff 1499 # enabling this will significantly increase the size of the XML output.
rgrover1 980:07ce7d9ed5ff 1500
rgrover1 980:07ce7d9ed5ff 1501 XML_PROGRAMLISTING = YES
rgrover1 980:07ce7d9ed5ff 1502
rgrover1 980:07ce7d9ed5ff 1503 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1504 # configuration options related to the DOCBOOK output
rgrover1 980:07ce7d9ed5ff 1505 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1506
rgrover1 980:07ce7d9ed5ff 1507 # If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files
rgrover1 980:07ce7d9ed5ff 1508 # that can be used to generate PDF.
rgrover1 980:07ce7d9ed5ff 1509
rgrover1 980:07ce7d9ed5ff 1510 GENERATE_DOCBOOK = NO
rgrover1 980:07ce7d9ed5ff 1511
rgrover1 980:07ce7d9ed5ff 1512 # The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put.
rgrover1 980:07ce7d9ed5ff 1513 # If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
rgrover1 980:07ce7d9ed5ff 1514 # front of it. If left blank docbook will be used as the default path.
rgrover1 980:07ce7d9ed5ff 1515
rgrover1 980:07ce7d9ed5ff 1516 DOCBOOK_OUTPUT = docbook
rgrover1 980:07ce7d9ed5ff 1517
rgrover1 980:07ce7d9ed5ff 1518 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1519 # configuration options for the AutoGen Definitions output
rgrover1 980:07ce7d9ed5ff 1520 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1521
rgrover1 980:07ce7d9ed5ff 1522 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
rgrover1 980:07ce7d9ed5ff 1523 # generate an AutoGen Definitions (see autogen.sf.net) file
rgrover1 980:07ce7d9ed5ff 1524 # that captures the structure of the code including all
rgrover1 980:07ce7d9ed5ff 1525 # documentation. Note that this feature is still experimental
rgrover1 980:07ce7d9ed5ff 1526 # and incomplete at the moment.
rgrover1 980:07ce7d9ed5ff 1527
rgrover1 980:07ce7d9ed5ff 1528 GENERATE_AUTOGEN_DEF = NO
rgrover1 980:07ce7d9ed5ff 1529
rgrover1 980:07ce7d9ed5ff 1530 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1531 # configuration options related to the Perl module output
rgrover1 980:07ce7d9ed5ff 1532 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1533
rgrover1 980:07ce7d9ed5ff 1534 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
rgrover1 980:07ce7d9ed5ff 1535 # generate a Perl module file that captures the structure of
rgrover1 980:07ce7d9ed5ff 1536 # the code including all documentation. Note that this
rgrover1 980:07ce7d9ed5ff 1537 # feature is still experimental and incomplete at the
rgrover1 980:07ce7d9ed5ff 1538 # moment.
rgrover1 980:07ce7d9ed5ff 1539
rgrover1 980:07ce7d9ed5ff 1540 GENERATE_PERLMOD = NO
rgrover1 980:07ce7d9ed5ff 1541
rgrover1 980:07ce7d9ed5ff 1542 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
rgrover1 980:07ce7d9ed5ff 1543 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
rgrover1 980:07ce7d9ed5ff 1544 # to generate PDF and DVI output from the Perl module output.
rgrover1 980:07ce7d9ed5ff 1545
rgrover1 980:07ce7d9ed5ff 1546 PERLMOD_LATEX = NO
rgrover1 980:07ce7d9ed5ff 1547
rgrover1 980:07ce7d9ed5ff 1548 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
rgrover1 980:07ce7d9ed5ff 1549 # nicely formatted so it can be parsed by a human reader.
rgrover1 980:07ce7d9ed5ff 1550 # This is useful
rgrover1 980:07ce7d9ed5ff 1551 # if you want to understand what is going on.
rgrover1 980:07ce7d9ed5ff 1552 # On the other hand, if this
rgrover1 980:07ce7d9ed5ff 1553 # tag is set to NO the size of the Perl module output will be much smaller
rgrover1 980:07ce7d9ed5ff 1554 # and Perl will parse it just the same.
rgrover1 980:07ce7d9ed5ff 1555
rgrover1 980:07ce7d9ed5ff 1556 PERLMOD_PRETTY = YES
rgrover1 980:07ce7d9ed5ff 1557
rgrover1 980:07ce7d9ed5ff 1558 # The names of the make variables in the generated doxyrules.make file
rgrover1 980:07ce7d9ed5ff 1559 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
rgrover1 980:07ce7d9ed5ff 1560 # This is useful so different doxyrules.make files included by the same
rgrover1 980:07ce7d9ed5ff 1561 # Makefile don't overwrite each other's variables.
rgrover1 980:07ce7d9ed5ff 1562
rgrover1 980:07ce7d9ed5ff 1563 PERLMOD_MAKEVAR_PREFIX =
rgrover1 980:07ce7d9ed5ff 1564
rgrover1 980:07ce7d9ed5ff 1565 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1566 # Configuration options related to the preprocessor
rgrover1 980:07ce7d9ed5ff 1567 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1568
rgrover1 980:07ce7d9ed5ff 1569 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 1570 # evaluate all C-preprocessor directives found in the sources and include
rgrover1 980:07ce7d9ed5ff 1571 # files.
rgrover1 980:07ce7d9ed5ff 1572
rgrover1 980:07ce7d9ed5ff 1573 ENABLE_PREPROCESSING = YES
rgrover1 980:07ce7d9ed5ff 1574
rgrover1 980:07ce7d9ed5ff 1575 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
rgrover1 980:07ce7d9ed5ff 1576 # names in the source code. If set to NO (the default) only conditional
rgrover1 980:07ce7d9ed5ff 1577 # compilation will be performed. Macro expansion can be done in a controlled
rgrover1 980:07ce7d9ed5ff 1578 # way by setting EXPAND_ONLY_PREDEF to YES.
rgrover1 980:07ce7d9ed5ff 1579
rgrover1 980:07ce7d9ed5ff 1580 MACRO_EXPANSION = NO
rgrover1 980:07ce7d9ed5ff 1581
rgrover1 980:07ce7d9ed5ff 1582 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
rgrover1 980:07ce7d9ed5ff 1583 # then the macro expansion is limited to the macros specified with the
rgrover1 980:07ce7d9ed5ff 1584 # PREDEFINED and EXPAND_AS_DEFINED tags.
rgrover1 980:07ce7d9ed5ff 1585
rgrover1 980:07ce7d9ed5ff 1586 EXPAND_ONLY_PREDEF = NO
rgrover1 980:07ce7d9ed5ff 1587
rgrover1 980:07ce7d9ed5ff 1588 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
rgrover1 980:07ce7d9ed5ff 1589 # pointed to by INCLUDE_PATH will be searched when a #include is found.
rgrover1 980:07ce7d9ed5ff 1590
rgrover1 980:07ce7d9ed5ff 1591 SEARCH_INCLUDES = YES
rgrover1 980:07ce7d9ed5ff 1592
rgrover1 980:07ce7d9ed5ff 1593 # The INCLUDE_PATH tag can be used to specify one or more directories that
rgrover1 980:07ce7d9ed5ff 1594 # contain include files that are not input files but should be processed by
rgrover1 980:07ce7d9ed5ff 1595 # the preprocessor.
rgrover1 980:07ce7d9ed5ff 1596
rgrover1 980:07ce7d9ed5ff 1597 INCLUDE_PATH =
rgrover1 980:07ce7d9ed5ff 1598
rgrover1 980:07ce7d9ed5ff 1599 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
rgrover1 980:07ce7d9ed5ff 1600 # patterns (like *.h and *.hpp) to filter out the header-files in the
rgrover1 980:07ce7d9ed5ff 1601 # directories. If left blank, the patterns specified with FILE_PATTERNS will
rgrover1 980:07ce7d9ed5ff 1602 # be used.
rgrover1 980:07ce7d9ed5ff 1603
rgrover1 980:07ce7d9ed5ff 1604 INCLUDE_FILE_PATTERNS =
rgrover1 980:07ce7d9ed5ff 1605
rgrover1 980:07ce7d9ed5ff 1606 # The PREDEFINED tag can be used to specify one or more macro names that
rgrover1 980:07ce7d9ed5ff 1607 # are defined before the preprocessor is started (similar to the -D option of
rgrover1 980:07ce7d9ed5ff 1608 # gcc). The argument of the tag is a list of macros of the form: name
rgrover1 980:07ce7d9ed5ff 1609 # or name=definition (no spaces). If the definition and the = are
rgrover1 980:07ce7d9ed5ff 1610 # omitted =1 is assumed. To prevent a macro definition from being
rgrover1 980:07ce7d9ed5ff 1611 # undefined via #undef or recursively expanded use the := operator
rgrover1 980:07ce7d9ed5ff 1612 # instead of the = operator.
rgrover1 980:07ce7d9ed5ff 1613
rgrover1 1008:c27e0c6f1f38 1614 PREDEFINED = TARGET_NRF51822
rgrover1 980:07ce7d9ed5ff 1615
rgrover1 980:07ce7d9ed5ff 1616 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
rgrover1 980:07ce7d9ed5ff 1617 # this tag can be used to specify a list of macro names that should be expanded.
rgrover1 980:07ce7d9ed5ff 1618 # The macro definition that is found in the sources will be used.
rgrover1 980:07ce7d9ed5ff 1619 # Use the PREDEFINED tag if you want to use a different macro definition that
rgrover1 980:07ce7d9ed5ff 1620 # overrules the definition found in the source code.
rgrover1 980:07ce7d9ed5ff 1621
rgrover1 980:07ce7d9ed5ff 1622 EXPAND_AS_DEFINED =
rgrover1 980:07ce7d9ed5ff 1623
rgrover1 980:07ce7d9ed5ff 1624 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
rgrover1 980:07ce7d9ed5ff 1625 # doxygen's preprocessor will remove all references to function-like macros
rgrover1 980:07ce7d9ed5ff 1626 # that are alone on a line, have an all uppercase name, and do not end with a
rgrover1 980:07ce7d9ed5ff 1627 # semicolon, because these will confuse the parser if not removed.
rgrover1 980:07ce7d9ed5ff 1628
rgrover1 980:07ce7d9ed5ff 1629 SKIP_FUNCTION_MACROS = YES
rgrover1 980:07ce7d9ed5ff 1630
rgrover1 980:07ce7d9ed5ff 1631 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1632 # Configuration::additions related to external references
rgrover1 980:07ce7d9ed5ff 1633 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1634
rgrover1 980:07ce7d9ed5ff 1635 # The TAGFILES option can be used to specify one or more tagfiles. For each
rgrover1 980:07ce7d9ed5ff 1636 # tag file the location of the external documentation should be added. The
rgrover1 980:07ce7d9ed5ff 1637 # format of a tag file without this location is as follows:
rgrover1 980:07ce7d9ed5ff 1638 #
rgrover1 980:07ce7d9ed5ff 1639 # TAGFILES = file1 file2 ...
rgrover1 980:07ce7d9ed5ff 1640 # Adding location for the tag files is done as follows:
rgrover1 980:07ce7d9ed5ff 1641 #
rgrover1 980:07ce7d9ed5ff 1642 # TAGFILES = file1=loc1 "file2 = loc2" ...
rgrover1 980:07ce7d9ed5ff 1643 # where "loc1" and "loc2" can be relative or absolute paths
rgrover1 980:07ce7d9ed5ff 1644 # or URLs. Note that each tag file must have a unique name (where the name does
rgrover1 980:07ce7d9ed5ff 1645 # NOT include the path). If a tag file is not located in the directory in which
rgrover1 980:07ce7d9ed5ff 1646 # doxygen is run, you must also specify the path to the tagfile here.
rgrover1 980:07ce7d9ed5ff 1647
rgrover1 980:07ce7d9ed5ff 1648 TAGFILES =
rgrover1 980:07ce7d9ed5ff 1649
rgrover1 980:07ce7d9ed5ff 1650 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
rgrover1 980:07ce7d9ed5ff 1651 # a tag file that is based on the input files it reads.
rgrover1 980:07ce7d9ed5ff 1652
rgrover1 980:07ce7d9ed5ff 1653 GENERATE_TAGFILE =
rgrover1 980:07ce7d9ed5ff 1654
rgrover1 980:07ce7d9ed5ff 1655 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
rgrover1 980:07ce7d9ed5ff 1656 # in the class index. If set to NO only the inherited external classes
rgrover1 980:07ce7d9ed5ff 1657 # will be listed.
rgrover1 980:07ce7d9ed5ff 1658
rgrover1 980:07ce7d9ed5ff 1659 ALLEXTERNALS = NO
rgrover1 980:07ce7d9ed5ff 1660
rgrover1 980:07ce7d9ed5ff 1661 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
rgrover1 980:07ce7d9ed5ff 1662 # in the modules index. If set to NO, only the current project's groups will
rgrover1 980:07ce7d9ed5ff 1663 # be listed.
rgrover1 980:07ce7d9ed5ff 1664
rgrover1 980:07ce7d9ed5ff 1665 EXTERNAL_GROUPS = YES
rgrover1 980:07ce7d9ed5ff 1666
rgrover1 980:07ce7d9ed5ff 1667 # If the EXTERNAL_PAGES tag is set to YES all external pages will be listed
rgrover1 980:07ce7d9ed5ff 1668 # in the related pages index. If set to NO, only the current project's
rgrover1 980:07ce7d9ed5ff 1669 # pages will be listed.
rgrover1 980:07ce7d9ed5ff 1670
rgrover1 980:07ce7d9ed5ff 1671 EXTERNAL_PAGES = YES
rgrover1 980:07ce7d9ed5ff 1672
rgrover1 980:07ce7d9ed5ff 1673 # The PERL_PATH should be the absolute path and name of the perl script
rgrover1 980:07ce7d9ed5ff 1674 # interpreter (i.e. the result of `which perl').
rgrover1 980:07ce7d9ed5ff 1675
rgrover1 980:07ce7d9ed5ff 1676 PERL_PATH = /usr/bin/perl
rgrover1 980:07ce7d9ed5ff 1677
rgrover1 980:07ce7d9ed5ff 1678 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1679 # Configuration options related to the dot tool
rgrover1 980:07ce7d9ed5ff 1680 #---------------------------------------------------------------------------
rgrover1 980:07ce7d9ed5ff 1681
rgrover1 980:07ce7d9ed5ff 1682 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 1683 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
rgrover1 980:07ce7d9ed5ff 1684 # or super classes. Setting the tag to NO turns the diagrams off. Note that
rgrover1 980:07ce7d9ed5ff 1685 # this option also works with HAVE_DOT disabled, but it is recommended to
rgrover1 980:07ce7d9ed5ff 1686 # install and use dot, since it yields more powerful graphs.
rgrover1 980:07ce7d9ed5ff 1687
rgrover1 980:07ce7d9ed5ff 1688 CLASS_DIAGRAMS = NO
rgrover1 980:07ce7d9ed5ff 1689
rgrover1 980:07ce7d9ed5ff 1690 # You can define message sequence charts within doxygen comments using the \msc
rgrover1 980:07ce7d9ed5ff 1691 # command. Doxygen will then run the mscgen tool (see
rgrover1 980:07ce7d9ed5ff 1692 # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
rgrover1 980:07ce7d9ed5ff 1693 # documentation. The MSCGEN_PATH tag allows you to specify the directory where
rgrover1 980:07ce7d9ed5ff 1694 # the mscgen tool resides. If left empty the tool is assumed to be found in the
rgrover1 980:07ce7d9ed5ff 1695 # default search path.
rgrover1 980:07ce7d9ed5ff 1696
rgrover1 980:07ce7d9ed5ff 1697 MSCGEN_PATH =
rgrover1 980:07ce7d9ed5ff 1698
rgrover1 980:07ce7d9ed5ff 1699 # If set to YES, the inheritance and collaboration graphs will hide
rgrover1 980:07ce7d9ed5ff 1700 # inheritance and usage relations if the target is undocumented
rgrover1 980:07ce7d9ed5ff 1701 # or is not a class.
rgrover1 980:07ce7d9ed5ff 1702
rgrover1 980:07ce7d9ed5ff 1703 HIDE_UNDOC_RELATIONS = YES
rgrover1 980:07ce7d9ed5ff 1704
rgrover1 980:07ce7d9ed5ff 1705 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
rgrover1 980:07ce7d9ed5ff 1706 # available from the path. This tool is part of Graphviz, a graph visualization
rgrover1 980:07ce7d9ed5ff 1707 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
rgrover1 980:07ce7d9ed5ff 1708 # have no effect if this option is set to NO (the default)
rgrover1 980:07ce7d9ed5ff 1709
rgrover1 980:07ce7d9ed5ff 1710 HAVE_DOT = YES
rgrover1 980:07ce7d9ed5ff 1711
rgrover1 980:07ce7d9ed5ff 1712 # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
rgrover1 980:07ce7d9ed5ff 1713 # allowed to run in parallel. When set to 0 (the default) doxygen will
rgrover1 980:07ce7d9ed5ff 1714 # base this on the number of processors available in the system. You can set it
rgrover1 980:07ce7d9ed5ff 1715 # explicitly to a value larger than 0 to get control over the balance
rgrover1 980:07ce7d9ed5ff 1716 # between CPU load and processing speed.
rgrover1 980:07ce7d9ed5ff 1717
rgrover1 980:07ce7d9ed5ff 1718 DOT_NUM_THREADS = 0
rgrover1 980:07ce7d9ed5ff 1719
rgrover1 980:07ce7d9ed5ff 1720 # By default doxygen will use the Helvetica font for all dot files that
rgrover1 980:07ce7d9ed5ff 1721 # doxygen generates. When you want a differently looking font you can specify
rgrover1 980:07ce7d9ed5ff 1722 # the font name using DOT_FONTNAME. You need to make sure dot is able to find
rgrover1 980:07ce7d9ed5ff 1723 # the font, which can be done by putting it in a standard location or by setting
rgrover1 980:07ce7d9ed5ff 1724 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
rgrover1 980:07ce7d9ed5ff 1725 # directory containing the font.
rgrover1 980:07ce7d9ed5ff 1726
rgrover1 980:07ce7d9ed5ff 1727 DOT_FONTNAME = Helvetica
rgrover1 980:07ce7d9ed5ff 1728
rgrover1 980:07ce7d9ed5ff 1729 # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
rgrover1 980:07ce7d9ed5ff 1730 # The default size is 10pt.
rgrover1 980:07ce7d9ed5ff 1731
rgrover1 980:07ce7d9ed5ff 1732 DOT_FONTSIZE = 10
rgrover1 980:07ce7d9ed5ff 1733
rgrover1 980:07ce7d9ed5ff 1734 # By default doxygen will tell dot to use the Helvetica font.
rgrover1 980:07ce7d9ed5ff 1735 # If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
rgrover1 980:07ce7d9ed5ff 1736 # set the path where dot can find it.
rgrover1 980:07ce7d9ed5ff 1737
rgrover1 980:07ce7d9ed5ff 1738 DOT_FONTPATH =
rgrover1 980:07ce7d9ed5ff 1739
rgrover1 980:07ce7d9ed5ff 1740 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
rgrover1 980:07ce7d9ed5ff 1741 # will generate a graph for each documented class showing the direct and
rgrover1 980:07ce7d9ed5ff 1742 # indirect inheritance relations. Setting this tag to YES will force the
rgrover1 980:07ce7d9ed5ff 1743 # CLASS_DIAGRAMS tag to NO.
rgrover1 980:07ce7d9ed5ff 1744
rgrover1 980:07ce7d9ed5ff 1745 CLASS_GRAPH = YES
rgrover1 980:07ce7d9ed5ff 1746
rgrover1 980:07ce7d9ed5ff 1747 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
rgrover1 980:07ce7d9ed5ff 1748 # will generate a graph for each documented class showing the direct and
rgrover1 980:07ce7d9ed5ff 1749 # indirect implementation dependencies (inheritance, containment, and
rgrover1 980:07ce7d9ed5ff 1750 # class references variables) of the class with other documented classes.
rgrover1 980:07ce7d9ed5ff 1751
rgrover1 980:07ce7d9ed5ff 1752 COLLABORATION_GRAPH = YES
rgrover1 980:07ce7d9ed5ff 1753
rgrover1 980:07ce7d9ed5ff 1754 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
rgrover1 980:07ce7d9ed5ff 1755 # will generate a graph for groups, showing the direct groups dependencies
rgrover1 980:07ce7d9ed5ff 1756
rgrover1 980:07ce7d9ed5ff 1757 GROUP_GRAPHS = YES
rgrover1 980:07ce7d9ed5ff 1758
rgrover1 980:07ce7d9ed5ff 1759 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
rgrover1 980:07ce7d9ed5ff 1760 # collaboration diagrams in a style similar to the OMG's Unified Modeling
rgrover1 980:07ce7d9ed5ff 1761 # Language.
rgrover1 980:07ce7d9ed5ff 1762
rgrover1 980:07ce7d9ed5ff 1763 UML_LOOK = NO
rgrover1 980:07ce7d9ed5ff 1764
rgrover1 980:07ce7d9ed5ff 1765 # If the UML_LOOK tag is enabled, the fields and methods are shown inside
rgrover1 980:07ce7d9ed5ff 1766 # the class node. If there are many fields or methods and many nodes the
rgrover1 980:07ce7d9ed5ff 1767 # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
rgrover1 980:07ce7d9ed5ff 1768 # threshold limits the number of items for each type to make the size more
rgrover1 980:07ce7d9ed5ff 1769 # manageable. Set this to 0 for no limit. Note that the threshold may be
rgrover1 980:07ce7d9ed5ff 1770 # exceeded by 50% before the limit is enforced.
rgrover1 980:07ce7d9ed5ff 1771
rgrover1 980:07ce7d9ed5ff 1772 UML_LIMIT_NUM_FIELDS = 10
rgrover1 980:07ce7d9ed5ff 1773
rgrover1 980:07ce7d9ed5ff 1774 # If set to YES, the inheritance and collaboration graphs will show the
rgrover1 980:07ce7d9ed5ff 1775 # relations between templates and their instances.
rgrover1 980:07ce7d9ed5ff 1776
rgrover1 980:07ce7d9ed5ff 1777 TEMPLATE_RELATIONS = NO
rgrover1 980:07ce7d9ed5ff 1778
rgrover1 980:07ce7d9ed5ff 1779 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
rgrover1 980:07ce7d9ed5ff 1780 # tags are set to YES then doxygen will generate a graph for each documented
rgrover1 980:07ce7d9ed5ff 1781 # file showing the direct and indirect include dependencies of the file with
rgrover1 980:07ce7d9ed5ff 1782 # other documented files.
rgrover1 980:07ce7d9ed5ff 1783
rgrover1 980:07ce7d9ed5ff 1784 INCLUDE_GRAPH = YES
rgrover1 980:07ce7d9ed5ff 1785
rgrover1 980:07ce7d9ed5ff 1786 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
rgrover1 980:07ce7d9ed5ff 1787 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
rgrover1 980:07ce7d9ed5ff 1788 # documented header file showing the documented files that directly or
rgrover1 980:07ce7d9ed5ff 1789 # indirectly include this file.
rgrover1 980:07ce7d9ed5ff 1790
rgrover1 980:07ce7d9ed5ff 1791 INCLUDED_BY_GRAPH = YES
rgrover1 980:07ce7d9ed5ff 1792
rgrover1 980:07ce7d9ed5ff 1793 # If the CALL_GRAPH and HAVE_DOT options are set to YES then
rgrover1 980:07ce7d9ed5ff 1794 # doxygen will generate a call dependency graph for every global function
rgrover1 980:07ce7d9ed5ff 1795 # or class method. Note that enabling this option will significantly increase
rgrover1 980:07ce7d9ed5ff 1796 # the time of a run. So in most cases it will be better to enable call graphs
rgrover1 980:07ce7d9ed5ff 1797 # for selected functions only using the \callgraph command.
rgrover1 980:07ce7d9ed5ff 1798
rgrover1 980:07ce7d9ed5ff 1799 CALL_GRAPH = NO
rgrover1 980:07ce7d9ed5ff 1800
rgrover1 980:07ce7d9ed5ff 1801 # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
rgrover1 980:07ce7d9ed5ff 1802 # doxygen will generate a caller dependency graph for every global function
rgrover1 980:07ce7d9ed5ff 1803 # or class method. Note that enabling this option will significantly increase
rgrover1 980:07ce7d9ed5ff 1804 # the time of a run. So in most cases it will be better to enable caller
rgrover1 980:07ce7d9ed5ff 1805 # graphs for selected functions only using the \callergraph command.
rgrover1 980:07ce7d9ed5ff 1806
rgrover1 980:07ce7d9ed5ff 1807 CALLER_GRAPH = NO
rgrover1 980:07ce7d9ed5ff 1808
rgrover1 980:07ce7d9ed5ff 1809 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
rgrover1 980:07ce7d9ed5ff 1810 # will generate a graphical hierarchy of all classes instead of a textual one.
rgrover1 980:07ce7d9ed5ff 1811
rgrover1 980:07ce7d9ed5ff 1812 GRAPHICAL_HIERARCHY = YES
rgrover1 980:07ce7d9ed5ff 1813
rgrover1 980:07ce7d9ed5ff 1814 # If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
rgrover1 980:07ce7d9ed5ff 1815 # then doxygen will show the dependencies a directory has on other directories
rgrover1 980:07ce7d9ed5ff 1816 # in a graphical way. The dependency relations are determined by the #include
rgrover1 980:07ce7d9ed5ff 1817 # relations between the files in the directories.
rgrover1 980:07ce7d9ed5ff 1818
rgrover1 980:07ce7d9ed5ff 1819 DIRECTORY_GRAPH = YES
rgrover1 980:07ce7d9ed5ff 1820
rgrover1 980:07ce7d9ed5ff 1821 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
rgrover1 980:07ce7d9ed5ff 1822 # generated by dot. Possible values are svg, png, jpg, or gif.
rgrover1 980:07ce7d9ed5ff 1823 # If left blank png will be used. If you choose svg you need to set
rgrover1 980:07ce7d9ed5ff 1824 # HTML_FILE_EXTENSION to xhtml in order to make the SVG files
rgrover1 980:07ce7d9ed5ff 1825 # visible in IE 9+ (other browsers do not have this requirement).
rgrover1 980:07ce7d9ed5ff 1826
rgrover1 980:07ce7d9ed5ff 1827 DOT_IMAGE_FORMAT = png
rgrover1 980:07ce7d9ed5ff 1828
rgrover1 980:07ce7d9ed5ff 1829 # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
rgrover1 980:07ce7d9ed5ff 1830 # enable generation of interactive SVG images that allow zooming and panning.
rgrover1 980:07ce7d9ed5ff 1831 # Note that this requires a modern browser other than Internet Explorer.
rgrover1 980:07ce7d9ed5ff 1832 # Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
rgrover1 980:07ce7d9ed5ff 1833 # need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
rgrover1 980:07ce7d9ed5ff 1834 # visible. Older versions of IE do not have SVG support.
rgrover1 980:07ce7d9ed5ff 1835
rgrover1 980:07ce7d9ed5ff 1836 INTERACTIVE_SVG = NO
rgrover1 980:07ce7d9ed5ff 1837
rgrover1 980:07ce7d9ed5ff 1838 # The tag DOT_PATH can be used to specify the path where the dot tool can be
rgrover1 980:07ce7d9ed5ff 1839 # found. If left blank, it is assumed the dot tool can be found in the path.
rgrover1 980:07ce7d9ed5ff 1840
rgrover1 980:07ce7d9ed5ff 1841 DOT_PATH =
rgrover1 980:07ce7d9ed5ff 1842
rgrover1 980:07ce7d9ed5ff 1843 # The DOTFILE_DIRS tag can be used to specify one or more directories that
rgrover1 980:07ce7d9ed5ff 1844 # contain dot files that are included in the documentation (see the
rgrover1 980:07ce7d9ed5ff 1845 # \dotfile command).
rgrover1 980:07ce7d9ed5ff 1846
rgrover1 980:07ce7d9ed5ff 1847 DOTFILE_DIRS =
rgrover1 980:07ce7d9ed5ff 1848
rgrover1 980:07ce7d9ed5ff 1849 # The MSCFILE_DIRS tag can be used to specify one or more directories that
rgrover1 980:07ce7d9ed5ff 1850 # contain msc files that are included in the documentation (see the
rgrover1 980:07ce7d9ed5ff 1851 # \mscfile command).
rgrover1 980:07ce7d9ed5ff 1852
rgrover1 980:07ce7d9ed5ff 1853 MSCFILE_DIRS =
rgrover1 980:07ce7d9ed5ff 1854
rgrover1 980:07ce7d9ed5ff 1855 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
rgrover1 980:07ce7d9ed5ff 1856 # nodes that will be shown in the graph. If the number of nodes in a graph
rgrover1 980:07ce7d9ed5ff 1857 # becomes larger than this value, doxygen will truncate the graph, which is
rgrover1 980:07ce7d9ed5ff 1858 # visualized by representing a node as a red box. Note that doxygen if the
rgrover1 980:07ce7d9ed5ff 1859 # number of direct children of the root node in a graph is already larger than
rgrover1 980:07ce7d9ed5ff 1860 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
rgrover1 980:07ce7d9ed5ff 1861 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
rgrover1 980:07ce7d9ed5ff 1862
rgrover1 980:07ce7d9ed5ff 1863 DOT_GRAPH_MAX_NODES = 200
rgrover1 980:07ce7d9ed5ff 1864
rgrover1 980:07ce7d9ed5ff 1865 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
rgrover1 980:07ce7d9ed5ff 1866 # graphs generated by dot. A depth value of 3 means that only nodes reachable
rgrover1 980:07ce7d9ed5ff 1867 # from the root by following a path via at most 3 edges will be shown. Nodes
rgrover1 980:07ce7d9ed5ff 1868 # that lay further from the root node will be omitted. Note that setting this
rgrover1 980:07ce7d9ed5ff 1869 # option to 1 or 2 may greatly reduce the computation time needed for large
rgrover1 980:07ce7d9ed5ff 1870 # code bases. Also note that the size of a graph can be further restricted by
rgrover1 980:07ce7d9ed5ff 1871 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
rgrover1 980:07ce7d9ed5ff 1872
rgrover1 980:07ce7d9ed5ff 1873 MAX_DOT_GRAPH_DEPTH = 1000
rgrover1 980:07ce7d9ed5ff 1874
rgrover1 980:07ce7d9ed5ff 1875 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
rgrover1 980:07ce7d9ed5ff 1876 # background. This is disabled by default, because dot on Windows does not
rgrover1 980:07ce7d9ed5ff 1877 # seem to support this out of the box. Warning: Depending on the platform used,
rgrover1 980:07ce7d9ed5ff 1878 # enabling this option may lead to badly anti-aliased labels on the edges of
rgrover1 980:07ce7d9ed5ff 1879 # a graph (i.e. they become hard to read).
rgrover1 980:07ce7d9ed5ff 1880
rgrover1 980:07ce7d9ed5ff 1881 DOT_TRANSPARENT = YES
rgrover1 980:07ce7d9ed5ff 1882
rgrover1 980:07ce7d9ed5ff 1883 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
rgrover1 980:07ce7d9ed5ff 1884 # files in one run (i.e. multiple -o and -T options on the command line). This
rgrover1 980:07ce7d9ed5ff 1885 # makes dot run faster, but since only newer versions of dot (>1.8.10)
rgrover1 980:07ce7d9ed5ff 1886 # support this, this feature is disabled by default.
rgrover1 980:07ce7d9ed5ff 1887
rgrover1 980:07ce7d9ed5ff 1888 DOT_MULTI_TARGETS = NO
rgrover1 980:07ce7d9ed5ff 1889
rgrover1 980:07ce7d9ed5ff 1890 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 1891 # generate a legend page explaining the meaning of the various boxes and
rgrover1 980:07ce7d9ed5ff 1892 # arrows in the dot generated graphs.
rgrover1 980:07ce7d9ed5ff 1893
rgrover1 980:07ce7d9ed5ff 1894 GENERATE_LEGEND = YES
rgrover1 980:07ce7d9ed5ff 1895
rgrover1 980:07ce7d9ed5ff 1896 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
rgrover1 980:07ce7d9ed5ff 1897 # remove the intermediate dot files that are used to generate
rgrover1 980:07ce7d9ed5ff 1898 # the various graphs.
rgrover1 980:07ce7d9ed5ff 1899
rgrover1 980:07ce7d9ed5ff 1900 DOT_CLEANUP = YES