add "LE Device Address" 0x1B to advertising data types
Fork of BLE_API by
ble/DiscoveredCharacteristic.h
- Committer:
- vcoubard
- Date:
- 2016-01-11
- Revision:
- 1115:82d4a8a56d91
- Parent:
- 1113:b6d999e7a73a
- Child:
- 1116:9cb51490b3f7
File content as of revision 1115:82d4a8a56d91:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef __DISCOVERED_CHARACTERISTIC_H__ #define __DISCOVERED_CHARACTERISTIC_H__ #include "UUID.h" #include "Gap.h" #include "GattAttribute.h" #include "GattClient.h" /** * Structure for holding information about the service and the characteristics * found during the discovery process. */ class DiscoveredCharacteristic { public: struct Properties_t { uint8_t _broadcast :1; /**< Broadcasting the value permitted. */ uint8_t _read :1; /**< Reading the value permitted. */ uint8_t _writeWoResp :1; /**< Writing the value with Write Command permitted. */ uint8_t _write :1; /**< Writing the value with Write Request permitted. */ uint8_t _notify :1; /**< Notications of the value permitted. */ uint8_t _indicate :1; /**< Indications of the value permitted. */ uint8_t _authSignedWrite :1; /**< Writing the value with Signed Write Command permitted. */ public: bool broadcast(void) const {return _broadcast; } bool read(void) const {return _read; } bool writeWoResp(void) const {return _writeWoResp; } bool write(void) const {return _write; } bool notify(void) const {return _notify; } bool indicate(void) const {return _indicate; } bool authSignedWrite(void) const {return _authSignedWrite;} private: operator uint8_t() const; /* Disallow implicit conversion into an integer. */ operator unsigned() const; /* Disallow implicit conversion into an integer. */ }; /** * Structure for holding information about the service and the characteristics * found during the discovery process. */ struct DiscoveredDescriptor { GattAttribute::Handle_t handle; /**< Descriptor Handle. */ UUID uuid; /**< Descriptor UUID. */ }; /** * Callback type for when a characteristic descriptor is found during descriptor- * discovery. The receiving function is passed in a pointer to a * DiscoveredDescriptor object which will remain valid for the lifetime * of the callback. Memory for this object is owned by the BLE_API eventing * framework. The application can safely make a persistent shallow-copy of * this object in order to work with the characteristic beyond the callback. */ typedef void (*DescriptorCallback_t)(const DiscoveredDescriptor *); /** * Initiate (or continue) a read for the value attribute, optionally at a * given offset. If the characteristic or descriptor to be read is longer * than ATT_MTU - 1, this function must be called multiple times with * appropriate offset to read the complete value. * * @return BLE_ERROR_NONE if a read has been initiated, or * BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or * BLE_STACK_BUSY if some client procedure is already in progress, or * BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties. */ ble_error_t read(uint16_t offset = 0) const; ble_error_t read(uint16_t offset, const GattClient::ReadCallback_t& onRead) const; /** * Perform a write without response procedure. * * @param length * The amount of data being written. * @param value * The bytes being written. * * @note It is important to note that a write without response will generate * an onDataSent() callback when the packet has been transmitted. There * will be a BLE-stack specific limit to the number of pending * writeWoResponse operations; the user may want to use the onDataSent() * callback for flow-control. * * @retval BLE_ERROR_NONE Successfully started the Write procedure, or * BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or * BLE_STACK_BUSY if some client procedure is already in progress, or * BLE_ERROR_NO_MEM if there are no available buffers left to process the request, or * BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties. */ ble_error_t writeWoResponse(uint16_t length, const uint8_t *value) const; /** * Initiate a GATT Characteristic Descriptor Discovery procedure for descriptors within this characteristic. * * @param callback * @param matchingUUID * Filter for descriptors. Defaults to wildcard which will discover all descriptors. * * @return BLE_ERROR_NONE if descriptor discovery is launched successfully; else an appropriate error. */ ble_error_t discoverDescriptors(DescriptorCallback_t callback, const UUID &matchingUUID = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN)) const; /** * Perform a write procedure. * * @param length * The amount of data being written. * @param value * The bytes being written. * * @note It is important to note that a write will generate * an onDataWritten() callback when the peer acknowledges the request. * * @retval BLE_ERROR_NONE Successfully started the Write procedure, or * BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or * BLE_STACK_BUSY if some client procedure is already in progress, or * BLE_ERROR_NO_MEM if there are no available buffers left to process the request, or * BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties. */ ble_error_t write(uint16_t length, const uint8_t *value) const; /** * Same as above but register the callback wich will be called once the data has been written */ ble_error_t write(uint16_t length, const uint8_t *value, const GattClient::WriteCallback_t& onRead) const; void setupLongUUID(UUID::LongUUIDBytes_t longUUID, UUID::ByteOrder_t order = UUID::MSB) { uuid.setupLong(longUUID, order); } public: const UUID& getUUID(void) const { return uuid; } const Properties_t& getProperties(void) const { return props; } const GattAttribute::Handle_t& getDeclHandle(void) const { return declHandle; } const GattAttribute::Handle_t& getValueHandle(void) const { return valueHandle; } public: DiscoveredCharacteristic() : gattc(NULL), uuid(UUID::ShortUUIDBytes_t(0)), props(), declHandle(GattAttribute::INVALID_HANDLE), valueHandle(GattAttribute::INVALID_HANDLE) { /* empty */ } protected: GattClient *gattc; protected: UUID uuid; Properties_t props; GattAttribute::Handle_t declHandle; GattAttribute::Handle_t valueHandle; Gap::Handle_t connHandle; }; #endif /*__DISCOVERED_CHARACTERISTIC_H__*/