add "LE Device Address" 0x1B to advertising data types
Fork of BLE_API by
ble/GattClient.h
- Committer:
- rgrover1
- Date:
- 2015-07-21
- Revision:
- 739:699b2a104ce3
- Parent:
- 737:79d95f9b93be
- Child:
- 740:8d52f0f8efd9
File content as of revision 739:699b2a104ce3:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef __GATT_CLIENT_H__ #define __GATT_CLIENT_H__ #include "Gap.h" #include "GattAttribute.h" #include "ServiceDiscovery.h" #include "GattCallbackParamTypes.h" class GattClient { public: typedef void (*ReadCallback_t)(const GattReadCallbackParams *params); enum WriteOp_t { GATT_OP_WRITE_REQ = 0x01, /**< Write Request. */ GATT_OP_WRITE_CMD = 0x02, /**< Write Command. */ }; typedef void (*WriteCallback_t)(const GattWriteCallbackParams *params); typedef void (*HVXCallback_t)(const GattHVXCallbackParams *params); /* * The following functions are meant to be overridden in the platform-specific sub-class. */ public: /** * Launch service discovery. Once launched, application callbacks will be * invoked for matching services/characteristics. isServiceDiscoveryActive() * can be used to determine status; and a termination callback (if setup) * will be invoked at the end. Service discovery can be terminated prematurely * if needed using terminateServiceDiscovery(). * * @param connectionHandle * Handle for the connection with the peer. * @param sc * This is the application callback for matching service. Taken as * NULL by default. Note: service discovery may still be active * when this callback is issued; calling asynchronous BLE-stack * APIs from within this application callback might cause the * stack to abort service discovery. If this becomes an issue, it * may be better to make local copy of the discoveredService and * wait for service discovery to terminate before operating on the * service. * @param cc * This is the application callback for matching characteristic. * Taken as NULL by default. Note: service discovery may still be * active when this callback is issued; calling asynchronous * BLE-stack APIs from within this application callback might cause * the stack to abort service discovery. If this becomes an issue, * it may be better to make local copy of the discoveredCharacteristic * and wait for service discovery to terminate before operating on the * characteristic. * @param matchingServiceUUID * UUID based filter for specifying a service in which the application is * interested. By default it is set as the wildcard UUID_UNKNOWN, * in which case it matches all services. If characteristic-UUID * filter (below) is set to the wildcard value, then a service * callback will be invoked for the matching service (or for every * service if the service filter is a wildcard). * @param matchingCharacteristicUUIDIn * UUID based filter for specifying characteristic in which the application * is interested. By default it is set as the wildcard UUID_UKNOWN * to match against any characteristic. If both service-UUID * filter and characteristic-UUID filter are used with non- wildcard * values, then only a single characteristic callback is * invoked for the matching characteristic. * * @note Using wildcard values for both service-UUID and characteristic- * UUID will result in complete service discovery--callbacks being * called for every service and characteristic. * * @note Providing NULL for the characteristic callback will result in * characteristic discovery being skipped for each matching * service. This allows for an inexpensive method to discover only * services. * * @return * BLE_ERROR_NONE if service discovery is launched successfully; else an appropriate error. */ virtual ble_error_t launchServiceDiscovery(Gap::Handle_t connectionHandle, ServiceDiscovery::ServiceCallback_t sc = NULL, ServiceDiscovery::CharacteristicCallback_t cc = NULL, const UUID &matchingServiceUUID = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN), const UUID &matchingCharacteristicUUIDIn = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN)) { /* avoid compiler warnings about unused variables */ (void)connectionHandle; (void)sc; (void)cc; (void)matchingServiceUUID; (void)matchingCharacteristicUUIDIn; return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */ } /** * Launch service discovery for services. Once launched, service discovery will remain * active with service-callbacks being issued back into the application for matching * services. isServiceDiscoveryActive() can be used to * determine status; and a termination callback (if setup) will be invoked * at the end. Service discovery can be terminated prematurely if needed * using terminateServiceDiscovery(). * * @param connectionHandle * Handle for the connection with the peer. * @param sc * This is the application callback for matching service. Note: service discovery may still be active * when this callback is issued; calling asynchronous BLE-stack * APIs from within this application callback might cause the * stack to abort service discovery. If this becomes an issue, it * may be better to make local copy of the discoveredService and * wait for service discovery to terminate before operating on the * service. * @param matchingServiceUUID * UUID based filter for specifying a service in which the application is * interested. By default it is set as the wildcard UUID_UNKNOWN, * in which case it matches all services. * * @return * BLE_ERROR_NONE if service discovery is launched successfully; else an appropriate error. */ virtual ble_error_t discoverServices(Gap::Handle_t connectionHandle, ServiceDiscovery::ServiceCallback_t callback, const UUID &matchingServiceUUID = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN)) { return launchServiceDiscovery(connectionHandle, callback, NULL, matchingServiceUUID); /* We take advantage of the property * that providing NULL for the characteristic callback will result in * characteristic discovery being skipped for each matching * service. This allows for an inexpensive method to discover only * services. Porter(s) are free to override this. */ } /** * Launch service discovery for services. Once launched, service discovery will remain * active with service-callbacks being issued back into the application for matching * services. isServiceDiscoveryActive() can be used to * determine status; and a termination callback (if setup) will be invoked * at the end. Service discovery can be terminated prematurely if needed * using terminateServiceDiscovery(). * * @param connectionHandle * Handle for the connection with the peer. * @param sc * This is the application callback for matching service. Note: service discovery may still be active * when this callback is issued; calling asynchronous BLE-stack * APIs from within this application callback might cause the * stack to abort service discovery. If this becomes an issue, it * may be better to make local copy of the discoveredService and * wait for service discovery to terminate before operating on the * service. * @param startHandle, endHandle * Handle range within which to limit the search * * @return * BLE_ERROR_NONE if service discovery is launched successfully; else an appropriate error. */ virtual ble_error_t discoverServices(Gap::Handle_t connectionHandle, ServiceDiscovery::ServiceCallback_t callback, GattAttribute::Handle_t startHandle, GattAttribute::Handle_t endHandle) { /* avoid compiler warnings about unused variables */ (void)connectionHandle; (void)callback; (void)startHandle; (void)endHandle; return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */ } /** * Is service-discovery currently active? */ virtual bool isServiceDiscoveryActive(void) const { return false; /* default implementation; override this API if this capability is supported. */ } /** * Terminate an ongoing service-discovery. This should result in an * invocation of the TerminationCallback if service-discovery is active. */ virtual void terminateServiceDiscovery(void) { /* default implementation; override this API if this capability is supported. */ } /* Initiate a Gatt Client read procedure by attribute-handle. */ virtual ble_error_t read(Gap::Handle_t connHandle, GattAttribute::Handle_t attributeHandle, uint16_t offset) const { /* avoid compiler warnings about unused variables */ (void)connHandle; (void)attributeHandle; (void)offset; return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */ } /** * Initiate a GATT Client write procedure. * * @param[in] cmd * Command can be either a write-request (which generates a * matching response from the peripheral), or a write-command, * which doesn't require the connected peer to respond. * @param[in] connHandle * Connection handle. * @param[in] attributeHandle * handle for the target attribtue on the remote GATT server. * @param[in] length * length of the new value. * @param[in] value * new value being written. */ virtual ble_error_t write(GattClient::WriteOp_t cmd, Gap::Handle_t connHandle, GattAttribute::Handle_t attributeHandle, size_t length, const uint8_t *value) const { /* avoid compiler warnings about unused variables */ (void)cmd; (void)connHandle; (void)attributeHandle; (void)length; (void)value; return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */ } /* Event callback handlers. */ public: /** * Setup a callback for read response events. */ void onDataRead(ReadCallback_t callback) { onDataReadCallback = callback; } /** * Setup a callback for write response events. * @Note: write commands (issued using writeWoResponse) don't generate a response. */ void onDataWrite(WriteCallback_t callback) { onDataWriteCallback = callback; } /** * Setup callback for when serviceDiscovery terminates. */ virtual void onServiceDiscoveryTermination(ServiceDiscovery::TerminationCallback_t callback) { (void)callback; /* avoid compiler warnings about ununsed variables */ /* default implementation; override this API if this capability is supported. */ } /** * Setup a callback for when GattClient receives an update event * corresponding to a change in value of a characteristic on the remote * GattServer. */ void onHVX(HVXCallback_t callback) { onHVXCallback = callback; } protected: GattClient() { /* empty */ } /* Entry points for the underlying stack to report events back to the user. */ public: void processReadResponse(const GattReadCallbackParams *params) { if (onDataReadCallback) { onDataReadCallback(params); } } void processWriteResponse(const GattWriteCallbackParams *params) { if (onDataWriteCallback) { onDataWriteCallback(params); } } void processHVXEvent(const GattHVXCallbackParams *params) { if (onHVXCallback) { onHVXCallback(params); } } protected: ReadCallback_t onDataReadCallback; WriteCallback_t onDataWriteCallback; HVXCallback_t onHVXCallback; private: /* disallow copy and assignment */ GattClient(const GattClient &); GattClient& operator=(const GattClient &); }; #endif // ifndef __GATT_CLIENT_H__