Andrew Fox
add "LE Device Address" 0x1B to advertising data types
Fork of
BLE_API
by 
Bluetooth Low Energy
ble/GattCharacteristic.h
- Committer:
- rgrover1
- Date:
- 2015-12-02
- Revision:
- 1013:663fe7dada7d
- Parent:
- 1012:373c20c87fcd
- Child:
- 1017:ccb8c0646e55
File content as of revision 1013:663fe7dada7d:
/* mbed Microcontroller Library
* Copyright (c) 2006-2013 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __GATT_CHARACTERISTIC_H__
#define __GATT_CHARACTERISTIC_H__
#include "Gap.h"
#include "SecurityManager.h"
#include "GattAttribute.h"
#include "GattCallbackParamTypes.h"
#include "FunctionPointerWithContext.h"
class GattCharacteristic {
public:
enum {
UUID_BATTERY_LEVEL_STATE_CHAR = 0x2A1B,
UUID_BATTERY_POWER_STATE_CHAR = 0x2A1A,
UUID_REMOVABLE_CHAR = 0x2A3A,
UUID_SERVICE_REQUIRED_CHAR = 0x2A3B,
UUID_ALERT_CATEGORY_ID_CHAR = 0x2A43,
UUID_ALERT_CATEGORY_ID_BIT_MASK_CHAR = 0x2A42,
UUID_ALERT_LEVEL_CHAR = 0x2A06,
UUID_ALERT_NOTIFICATION_CONTROL_POINT_CHAR = 0x2A44,
UUID_ALERT_STATUS_CHAR = 0x2A3F,
UUID_BATTERY_LEVEL_CHAR = 0x2A19,
UUID_BLOOD_PRESSURE_FEATURE_CHAR = 0x2A49,
UUID_BLOOD_PRESSURE_MEASUREMENT_CHAR = 0x2A35,
UUID_BODY_SENSOR_LOCATION_CHAR = 0x2A38,
UUID_BOOT_KEYBOARD_INPUT_REPORT_CHAR = 0x2A22,
UUID_BOOT_KEYBOARD_OUTPUT_REPORT_CHAR = 0x2A32,
UUID_BOOT_MOUSE_INPUT_REPORT_CHAR = 0x2A33,
UUID_CURRENT_TIME_CHAR = 0x2A2B,
UUID_DATE_TIME_CHAR = 0x2A08,
UUID_DAY_DATE_TIME_CHAR = 0x2A0A,
UUID_DAY_OF_WEEK_CHAR = 0x2A09,
UUID_DST_OFFSET_CHAR = 0x2A0D,
UUID_EXACT_TIME_256_CHAR = 0x2A0C,
UUID_FIRMWARE_REVISION_STRING_CHAR = 0x2A26,
UUID_GLUCOSE_FEATURE_CHAR = 0x2A51,
UUID_GLUCOSE_MEASUREMENT_CHAR = 0x2A18,
UUID_GLUCOSE_MEASUREMENT_CONTEXT_CHAR = 0x2A34,
UUID_HARDWARE_REVISION_STRING_CHAR = 0x2A27,
UUID_HEART_RATE_CONTROL_POINT_CHAR = 0x2A39,
UUID_HEART_RATE_MEASUREMENT_CHAR = 0x2A37,
UUID_HID_CONTROL_POINT_CHAR = 0x2A4C,
UUID_HID_INFORMATION_CHAR = 0x2A4A,
UUID_HUMIDITY_CHAR = 0x2A6F,
UUID_IEEE_REGULATORY_CERTIFICATION_DATA_LIST_CHAR = 0x2A2A,
UUID_INTERMEDIATE_CUFF_PRESSURE_CHAR = 0x2A36,
UUID_INTERMEDIATE_TEMPERATURE_CHAR = 0x2A1E,
UUID_LOCAL_TIME_INFORMATION_CHAR = 0x2A0F,
UUID_MANUFACTURER_NAME_STRING_CHAR = 0x2A29,
UUID_MEASUREMENT_INTERVAL_CHAR = 0x2A21,
UUID_MODEL_NUMBER_STRING_CHAR = 0x2A24,
UUID_UNREAD_ALERT_CHAR = 0x2A45,
UUID_NEW_ALERT_CHAR = 0x2A46,
UUID_PNP_ID_CHAR = 0x2A50,
UUID_PRESSURE_CHAR = 0x2A6D,
UUID_PROTOCOL_MODE_CHAR = 0x2A4E,
UUID_RECORD_ACCESS_CONTROL_POINT_CHAR = 0x2A52,
UUID_REFERENCE_TIME_INFORMATION_CHAR = 0x2A14,
UUID_REPORT_CHAR = 0x2A4D,
UUID_REPORT_MAP_CHAR = 0x2A4B,
UUID_RINGER_CONTROL_POINT_CHAR = 0x2A40,
UUID_RINGER_SETTING_CHAR = 0x2A41,
UUID_SCAN_INTERVAL_WINDOW_CHAR = 0x2A4F,
UUID_SCAN_REFRESH_CHAR = 0x2A31,
UUID_SERIAL_NUMBER_STRING_CHAR = 0x2A25,
UUID_SOFTWARE_REVISION_STRING_CHAR = 0x2A28,
UUID_SUPPORTED_NEW_ALERT_CATEGORY_CHAR = 0x2A47,
UUID_SUPPORTED_UNREAD_ALERT_CATEGORY_CHAR = 0x2A48,
UUID_SYSTEM_ID_CHAR = 0x2A23,
UUID_TEMPERATURE_CHAR = 0x2A6E,
UUID_TEMPERATURE_MEASUREMENT_CHAR = 0x2A1C,
UUID_TEMPERATURE_TYPE_CHAR = 0x2A1D,
UUID_TIME_ACCURACY_CHAR = 0x2A12,
UUID_TIME_SOURCE_CHAR = 0x2A13,
UUID_TIME_UPDATE_CONTROL_POINT_CHAR = 0x2A16,
UUID_TIME_UPDATE_STATE_CHAR = 0x2A17,
UUID_TIME_WITH_DST_CHAR = 0x2A11,
UUID_TIME_ZONE_CHAR = 0x2A0E,
UUID_TX_POWER_LEVEL_CHAR = 0x2A07,
UUID_CSC_FEATURE_CHAR = 0x2A5C,
UUID_CSC_MEASUREMENT_CHAR = 0x2A5B,
UUID_RSC_FEATURE_CHAR = 0x2A54,
UUID_RSC_MEASUREMENT_CHAR = 0x2A53
};
/**************************************************************************/
/*!
\brief Standard GATT characteristic presentation format unit types.
These unit types are used to describe what the raw numeric
data in a characteristic actually represents.
\note See https://developer.bluetooth.org/gatt/units/Pages/default.aspx
*/
/**************************************************************************/
enum {
BLE_GATT_UNIT_NONE = 0x2700, /**< No specified unit type. */
BLE_GATT_UNIT_LENGTH_METRE = 0x2701, /**< Length, metre. */
BLE_GATT_UNIT_MASS_KILOGRAM = 0x2702, /**< Mass, kilogram. */
BLE_GATT_UNIT_TIME_SECOND = 0x2703, /**< Time, second. */
BLE_GATT_UNIT_ELECTRIC_CURRENT_AMPERE = 0x2704, /**< Electric current, ampere. */
BLE_GATT_UNIT_THERMODYNAMIC_TEMPERATURE_KELVIN = 0x2705, /**< Thermodynamic temperature, kelvin. */
BLE_GATT_UNIT_AMOUNT_OF_SUBSTANCE_MOLE = 0x2706, /**< Amount of substance, mole. */
BLE_GATT_UNIT_LUMINOUS_INTENSITY_CANDELA = 0x2707, /**< Luminous intensity, candela. */
BLE_GATT_UNIT_AREA_SQUARE_METRES = 0x2710, /**< Area, square metres. */
BLE_GATT_UNIT_VOLUME_CUBIC_METRES = 0x2711, /**< Volume, cubic metres. */
BLE_GATT_UNIT_VELOCITY_METRES_PER_SECOND = 0x2712, /**< Velocity, metres per second. */
BLE_GATT_UNIT_ACCELERATION_METRES_PER_SECOND_SQUARED = 0x2713, /**< Acceleration, metres per second squared. */
BLE_GATT_UNIT_WAVENUMBER_RECIPROCAL_METRE = 0x2714, /**< Wave number reciprocal, metre. */
BLE_GATT_UNIT_DENSITY_KILOGRAM_PER_CUBIC_METRE = 0x2715, /**< Density, kilogram per cubic metre. */
BLE_GATT_UNIT_SURFACE_DENSITY_KILOGRAM_PER_SQUARE_METRE = 0x2716, /**< */
BLE_GATT_UNIT_SPECIFIC_VOLUME_CUBIC_METRE_PER_KILOGRAM = 0x2717, /**< */
BLE_GATT_UNIT_CURRENT_DENSITY_AMPERE_PER_SQUARE_METRE = 0x2718, /**< */
BLE_GATT_UNIT_MAGNETIC_FIELD_STRENGTH_AMPERE_PER_METRE = 0x2719, /**< Magnetic field strength, ampere per metre. */
BLE_GATT_UNIT_AMOUNT_CONCENTRATION_MOLE_PER_CUBIC_METRE = 0x271A, /**< */
BLE_GATT_UNIT_MASS_CONCENTRATION_KILOGRAM_PER_CUBIC_METRE = 0x271B, /**< */
BLE_GATT_UNIT_LUMINANCE_CANDELA_PER_SQUARE_METRE = 0x271C, /**< */
BLE_GATT_UNIT_REFRACTIVE_INDEX = 0x271D, /**< */
BLE_GATT_UNIT_RELATIVE_PERMEABILITY = 0x271E, /**< */
BLE_GATT_UNIT_PLANE_ANGLE_RADIAN = 0x2720, /**< */
BLE_GATT_UNIT_SOLID_ANGLE_STERADIAN = 0x2721, /**< */
BLE_GATT_UNIT_FREQUENCY_HERTZ = 0x2722, /**< Frequency, hertz. */
BLE_GATT_UNIT_FORCE_NEWTON = 0x2723, /**< Force, newton. */
BLE_GATT_UNIT_PRESSURE_PASCAL = 0x2724, /**< Pressure, pascal. */
BLE_GATT_UNIT_ENERGY_JOULE = 0x2725, /**< Energy, joule. */
BLE_GATT_UNIT_POWER_WATT = 0x2726, /**< Power, watt. */
BLE_GATT_UNIT_ELECTRIC_CHARGE_COULOMB = 0x2727, /**< Electrical charge, coulomb. */
BLE_GATT_UNIT_ELECTRIC_POTENTIAL_DIFFERENCE_VOLT = 0x2728, /**< Electrical potential difference, voltage. */
BLE_GATT_UNIT_CAPACITANCE_FARAD = 0x2729, /**< */
BLE_GATT_UNIT_ELECTRIC_RESISTANCE_OHM = 0x272A, /**< */
BLE_GATT_UNIT_ELECTRIC_CONDUCTANCE_SIEMENS = 0x272B, /**< */
BLE_GATT_UNIT_MAGNETIC_FLEX_WEBER = 0x272C, /**< */
BLE_GATT_UNIT_MAGNETIC_FLEX_DENSITY_TESLA = 0x272D, /**< */
BLE_GATT_UNIT_INDUCTANCE_HENRY = 0x272E, /**< */
BLE_GATT_UNIT_THERMODYNAMIC_TEMPERATURE_DEGREE_CELSIUS = 0x272F, /**< */
BLE_GATT_UNIT_LUMINOUS_FLUX_LUMEN = 0x2730, /**< */
BLE_GATT_UNIT_ILLUMINANCE_LUX = 0x2731, /**< */
BLE_GATT_UNIT_ACTIVITY_REFERRED_TO_A_RADIONUCLIDE_BECQUEREL = 0x2732, /**< */
BLE_GATT_UNIT_ABSORBED_DOSE_GRAY = 0x2733, /**< */
BLE_GATT_UNIT_DOSE_EQUIVALENT_SIEVERT = 0x2734, /**< */
BLE_GATT_UNIT_CATALYTIC_ACTIVITY_KATAL = 0x2735, /**< */
BLE_GATT_UNIT_DYNAMIC_VISCOSITY_PASCAL_SECOND = 0x2740, /**< */
BLE_GATT_UNIT_MOMENT_OF_FORCE_NEWTON_METRE = 0x2741, /**< */
BLE_GATT_UNIT_SURFACE_TENSION_NEWTON_PER_METRE = 0x2742, /**< */
BLE_GATT_UNIT_ANGULAR_VELOCITY_RADIAN_PER_SECOND = 0x2743, /**< */
BLE_GATT_UNIT_ANGULAR_ACCELERATION_RADIAN_PER_SECOND_SQUARED = 0x2744, /**< */
BLE_GATT_UNIT_HEAT_FLUX_DENSITY_WATT_PER_SQUARE_METRE = 0x2745, /**< */
BLE_GATT_UNIT_HEAT_CAPACITY_JOULE_PER_KELVIN = 0x2746, /**< */
BLE_GATT_UNIT_SPECIFIC_HEAT_CAPACITY_JOULE_PER_KILOGRAM_KELVIN = 0x2747, /**< */
BLE_GATT_UNIT_SPECIFIC_ENERGY_JOULE_PER_KILOGRAM = 0x2748, /**< */
BLE_GATT_UNIT_THERMAL_CONDUCTIVITY_WATT_PER_METRE_KELVIN = 0x2749, /**< */
BLE_GATT_UNIT_ENERGY_DENSITY_JOULE_PER_CUBIC_METRE = 0x274A, /**< */
BLE_GATT_UNIT_ELECTRIC_FIELD_STRENGTH_VOLT_PER_METRE = 0x274B, /**< */
BLE_GATT_UNIT_ELECTRIC_CHARGE_DENSITY_COULOMB_PER_CUBIC_METRE = 0x274C, /**< */
BLE_GATT_UNIT_SURFACE_CHARGE_DENSITY_COULOMB_PER_SQUARE_METRE = 0x274D, /**< */
BLE_GATT_UNIT_ELECTRIC_FLUX_DENSITY_COULOMB_PER_SQUARE_METRE = 0x274E, /**< */
BLE_GATT_UNIT_PERMITTIVITY_FARAD_PER_METRE = 0x274F, /**< */
BLE_GATT_UNIT_PERMEABILITY_HENRY_PER_METRE = 0x2750, /**< */
BLE_GATT_UNIT_MOLAR_ENERGY_JOULE_PER_MOLE = 0x2751, /**< */
BLE_GATT_UNIT_MOLAR_ENTROPY_JOULE_PER_MOLE_KELVIN = 0x2752, /**< */
BLE_GATT_UNIT_EXPOSURE_COULOMB_PER_KILOGRAM = 0x2753, /**< */
BLE_GATT_UNIT_ABSORBED_DOSE_RATE_GRAY_PER_SECOND = 0x2754, /**< */
BLE_GATT_UNIT_RADIANT_INTENSITY_WATT_PER_STERADIAN = 0x2755, /**< */
BLE_GATT_UNIT_RADIANCE_WATT_PER_SQUARE_METRE_STERADIAN = 0x2756, /**< */
BLE_GATT_UNIT_CATALYTIC_ACTIVITY_CONCENTRATION_KATAL_PER_CUBIC_METRE = 0x2757, /**< */
BLE_GATT_UNIT_TIME_MINUTE = 0x2760, /**< Time, minute. */
BLE_GATT_UNIT_TIME_HOUR = 0x2761, /**< Time, hour. */
BLE_GATT_UNIT_TIME_DAY = 0x2762, /**< Time, day. */
BLE_GATT_UNIT_PLANE_ANGLE_DEGREE = 0x2763, /**< */
BLE_GATT_UNIT_PLANE_ANGLE_MINUTE = 0x2764, /**< */
BLE_GATT_UNIT_PLANE_ANGLE_SECOND = 0x2765, /**< */
BLE_GATT_UNIT_AREA_HECTARE = 0x2766, /**< */
BLE_GATT_UNIT_VOLUME_LITRE = 0x2767, /**< */
BLE_GATT_UNIT_MASS_TONNE = 0x2768, /**< */
BLE_GATT_UNIT_PRESSURE_BAR = 0x2780, /**< Pressure, bar. */
BLE_GATT_UNIT_PRESSURE_MILLIMETRE_OF_MERCURY = 0x2781, /**< Pressure, millimetre of mercury. */
BLE_GATT_UNIT_LENGTH_ANGSTROM = 0x2782, /**< */
BLE_GATT_UNIT_LENGTH_NAUTICAL_MILE = 0x2783, /**< */
BLE_GATT_UNIT_AREA_BARN = 0x2784, /**< */
BLE_GATT_UNIT_VELOCITY_KNOT = 0x2785, /**< */
BLE_GATT_UNIT_LOGARITHMIC_RADIO_QUANTITY_NEPER = 0x2786, /**< */
BLE_GATT_UNIT_LOGARITHMIC_RADIO_QUANTITY_BEL = 0x2787, /**< */
BLE_GATT_UNIT_LENGTH_YARD = 0x27A0, /**< Length, yard. */
BLE_GATT_UNIT_LENGTH_PARSEC = 0x27A1, /**< Length, parsec. */
BLE_GATT_UNIT_LENGTH_INCH = 0x27A2, /**< Length, inch. */
BLE_GATT_UNIT_LENGTH_FOOT = 0x27A3, /**< Length, foot. */
BLE_GATT_UNIT_LENGTH_MILE = 0x27A4, /**< Length, mile. */
BLE_GATT_UNIT_PRESSURE_POUND_FORCE_PER_SQUARE_INCH = 0x27A5, /**< */
BLE_GATT_UNIT_VELOCITY_KILOMETRE_PER_HOUR = 0x27A6, /**< Velocity, kilometre per hour. */
BLE_GATT_UNIT_VELOCITY_MILE_PER_HOUR = 0x27A7, /**< Velocity, mile per hour. */
BLE_GATT_UNIT_ANGULAR_VELOCITY_REVOLUTION_PER_MINUTE = 0x27A8, /**< Angular Velocity, revolution per minute. */
BLE_GATT_UNIT_ENERGY_GRAM_CALORIE = 0x27A9, /**< Energy, gram calorie. */
BLE_GATT_UNIT_ENERGY_KILOGRAM_CALORIE = 0x27AA, /**< Energy, kilogram calorie. */
BLE_GATT_UNIT_ENERGY_KILOWATT_HOUR = 0x27AB, /**< Energy, killowatt hour. */
BLE_GATT_UNIT_THERMODYNAMIC_TEMPERATURE_DEGREE_FAHRENHEIT = 0x27AC, /**< */
BLE_GATT_UNIT_PERCENTAGE = 0x27AD, /**< Percentage. */
BLE_GATT_UNIT_PER_MILLE = 0x27AE, /**< */
BLE_GATT_UNIT_PERIOD_BEATS_PER_MINUTE = 0x27AF, /**< */
BLE_GATT_UNIT_ELECTRIC_CHARGE_AMPERE_HOURS = 0x27B0, /**< */
BLE_GATT_UNIT_MASS_DENSITY_MILLIGRAM_PER_DECILITRE = 0x27B1, /**< */
BLE_GATT_UNIT_MASS_DENSITY_MILLIMOLE_PER_LITRE = 0x27B2, /**< */
BLE_GATT_UNIT_TIME_YEAR = 0x27B3, /**< Time, year. */
BLE_GATT_UNIT_TIME_MONTH = 0x27B4, /**< Time, month. */
BLE_GATT_UNIT_CONCENTRATION_COUNT_PER_CUBIC_METRE = 0x27B5, /**< */
BLE_GATT_UNIT_IRRADIANCE_WATT_PER_SQUARE_METRE = 0x27B6 /**< */
};
/**************************************************************************/
/*!
\brief Standard GATT number types.
\note See Bluetooth Specification 4.0 (Vol. 3), Part G, Section 3.3.3.5.2
\note See http://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml
*/
/**************************************************************************/
enum {
BLE_GATT_FORMAT_RFU = 0x00, /**< Reserved for future use. */
BLE_GATT_FORMAT_BOOLEAN = 0x01, /**< Boolean. */
BLE_GATT_FORMAT_2BIT = 0x02, /**< Unsigned 2-bit integer. */
BLE_GATT_FORMAT_NIBBLE = 0x03, /**< Unsigned 4-bit integer. */
BLE_GATT_FORMAT_UINT8 = 0x04, /**< Unsigned 8-bit integer. */
BLE_GATT_FORMAT_UINT12 = 0x05, /**< Unsigned 12-bit integer. */
BLE_GATT_FORMAT_UINT16 = 0x06, /**< Unsigned 16-bit integer. */
BLE_GATT_FORMAT_UINT24 = 0x07, /**< Unsigned 24-bit integer. */
BLE_GATT_FORMAT_UINT32 = 0x08, /**< Unsigned 32-bit integer. */
BLE_GATT_FORMAT_UINT48 = 0x09, /**< Unsigned 48-bit integer. */
BLE_GATT_FORMAT_UINT64 = 0x0A, /**< Unsigned 64-bit integer. */
BLE_GATT_FORMAT_UINT128 = 0x0B, /**< Unsigned 128-bit integer. */
BLE_GATT_FORMAT_SINT8 = 0x0C, /**< Signed 2-bit integer. */
BLE_GATT_FORMAT_SINT12 = 0x0D, /**< Signed 12-bit integer. */
BLE_GATT_FORMAT_SINT16 = 0x0E, /**< Signed 16-bit integer. */
BLE_GATT_FORMAT_SINT24 = 0x0F, /**< Signed 24-bit integer. */
BLE_GATT_FORMAT_SINT32 = 0x10, /**< Signed 32-bit integer. */
BLE_GATT_FORMAT_SINT48 = 0x11, /**< Signed 48-bit integer. */
BLE_GATT_FORMAT_SINT64 = 0x12, /**< Signed 64-bit integer. */
BLE_GATT_FORMAT_SINT128 = 0x13, /**< Signed 128-bit integer. */
BLE_GATT_FORMAT_FLOAT32 = 0x14, /**< IEEE-754 32-bit floating point. */
BLE_GATT_FORMAT_FLOAT64 = 0x15, /**< IEEE-754 64-bit floating point. */
BLE_GATT_FORMAT_SFLOAT = 0x16, /**< IEEE-11073 16-bit SFLOAT. */
BLE_GATT_FORMAT_FLOAT = 0x17, /**< IEEE-11073 32-bit FLOAT. */
BLE_GATT_FORMAT_DUINT16 = 0x18, /**< IEEE-20601 format. */
BLE_GATT_FORMAT_UTF8S = 0x19, /**< UTF-8 string. */
BLE_GATT_FORMAT_UTF16S = 0x1A, /**< UTF-16 string. */
BLE_GATT_FORMAT_STRUCT = 0x1B /**< Opaque Structure. */
};
/**************************************************************************/
/*!
\brief Standard GATT characteristic properties.
\note See Bluetooth Specification 4.0 (Vol. 3), Part G, Section 3.3.1.1
and Section 3.3.3.1 for Extended Properties
*/
/**************************************************************************/
enum Properties_t {
BLE_GATT_CHAR_PROPERTIES_NONE = 0x00,
BLE_GATT_CHAR_PROPERTIES_BROADCAST = 0x01, /**< Permits broadcasts of the characteristic value using the Server Characteristic Configuration descriptor. */
BLE_GATT_CHAR_PROPERTIES_READ = 0x02, /**< Permits reads of the characteristic value. */
BLE_GATT_CHAR_PROPERTIES_WRITE_WITHOUT_RESPONSE = 0x04, /**< Permits writes of the characteristic value without response. */
BLE_GATT_CHAR_PROPERTIES_WRITE = 0x08, /**< Permits writes of the characteristic value with response. */
BLE_GATT_CHAR_PROPERTIES_NOTIFY = 0x10, /**< Permits notifications of a characteristic value without acknowledgment. */
BLE_GATT_CHAR_PROPERTIES_INDICATE = 0x20, /**< Permits indications of a characteristic value with acknowledgment. */
BLE_GATT_CHAR_PROPERTIES_AUTHENTICATED_SIGNED_WRITES = 0x40, /**< Permits signed writes to the characteristic value. */
BLE_GATT_CHAR_PROPERTIES_EXTENDED_PROPERTIES = 0x80 /**< Additional characteristic properties are defined in the Characteristic Extended Properties descriptor */
};
/**************************************************************************/
/*!
\brief GATT presentation format wrapper
\note See Bluetooth Specification 4.0 (Vol. 3), Part G, Section 3.3.3.5
\note See https://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml
*/
/**************************************************************************/
struct PresentationFormat_t {
uint8_t gatt_format; /**< Format of the value; see @ref ble_gatt_format_t. */
int8_t exponent; /**< Exponent for integer data types. Example: if Exponent = -3 and the char value is 3892, the actual value is 3.892 */
uint16_t gatt_unit; /**< UUID from Bluetooth Assigned Numbers; see @ref ble_gatt_unit_t. */
uint8_t gatt_namespace; /**< Namespace from Bluetooth Assigned Numbers, normally '1'; see @ref BLE_GATT_CPF_NAMESPACES. */
uint16_t gatt_nsdesc; /**< Namespace description from Bluetooth Assigned Numbers, normally '0'; see @ref BLE_GATT_CPF_NAMESPACES. */
};
/**
* @brief Creates a new GattCharacteristic using the specified 16-bit
* UUID, value length, and properties.
*
* @note The UUID value must be unique in the service and is normally >1.
*
* @param[in] uuid
* The UUID to use for this characteristic.
* @param[in] valuePtr
* The memory holding the initial value. The value is copied
* into the stack when the enclosing service is added, and
* is thereafter maintained internally by the stack.
* @param[in] len
* The length in bytes of this characteristic's value.
* @param[in] maxLen
* The max length in bytes of this characteristic's value.
* @param[in] hasVariableLen
* Whether the attribute's value length changes over time.
* @param[in] props
* The 8-bit field containing the characteristic's properties.
* @param[in] descriptors
* A pointer to an array of descriptors to be included within
* this characteristic. The memory for the descriptor array is
* owned by the caller, and should remain valid at least until
* the enclosing service is added to the GATT table.
* @param[in] numDescriptors
* The number of descriptors in the previous array.
*
* @NOTE: If valuePtr == NULL, length == 0, and properties == READ
* for the value attribute of a characteristic, then that particular
* characteristic may be considered optional and dropped while
* instantiating the service with the underlying BLE stack.
*/
GattCharacteristic(const UUID &uuid,
uint8_t *valuePtr = NULL,
uint16_t len = 0,
uint16_t maxLen = 0,
uint8_t props = BLE_GATT_CHAR_PROPERTIES_NONE,
GattAttribute *descriptors[] = NULL,
unsigned numDescriptors = 0,
bool hasVariableLen = true) :
_valueAttribute(uuid, valuePtr, len, maxLen, hasVariableLen),
_properties(props),
_requiredSecurity(SecurityManager::SECURITY_MODE_ENCRYPTION_OPEN_LINK),
_descriptors(descriptors),
_descriptorCount(numDescriptors),
enabledReadAuthorization(false),
enabledWriteAuthorization(false),
readAuthorizationCallback(),
writeAuthorizationCallback() {
/* empty */
}
public:
/**
* Set up the minimum security (mode and level) requirements for access to the characteristic's value attribute.
*
* @param securityMode Can be one of encryption or signing, with or without protection for man in the middle attacks (MITM).
*/
void requireSecurity(SecurityManager::SecurityMode_t securityMode) {
_requiredSecurity = securityMode;
}
public:
/**
* Authorization.
*/
void setWriteAuthorizationCallback(void (*callback)(GattWriteAuthCallbackParams *)) {
writeAuthorizationCallback.attach(callback);
enabledWriteAuthorization = true;
}
template <typename T>
void setWriteAuthorizationCallback(T *object, void (T::*member)(GattWriteAuthCallbackParams *)) {
writeAuthorizationCallback.attach(object, member);
enabledWriteAuthorization = true;
}
void setReadAuthorizationCallback(void (*callback)(GattReadAuthCallbackParams *)) {
readAuthorizationCallback.attach(callback);
enabledReadAuthorization = true;
}
template <typename T>
void setReadAuthorizationCallback(T *object, void (T::*member)(GattReadAuthCallbackParams *)) {
readAuthorizationCallback.attach(object, member);
enabledReadAuthorization = true;
}
/**
* Helper function meant to be called from the guts of the BLE stack to
* determine the authorization reply for a write request.
* @param params To capture the context of the write-auth request. Also contains an out-parameter for reply.
* @return true if the write is authorized to proceed.
*/
GattAuthCallbackReply_t authorizeWrite(GattWriteAuthCallbackParams *params) {
if (!isWriteAuthorizationEnabled()) {
return AUTH_CALLBACK_REPLY_SUCCESS;
}
params->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS; /* Initialized to no-error by default. */
writeAuthorizationCallback.call(params);
return params->authorizationReply;
}
/**
* Helper function meant to be called from the guts of the BLE stack to
* determine the authorization reply for a read request.
* @param params To capture the context of the read-auth request.
*
* @NOTE: To authorize or deny the read the params->authorizationReply field
* should be set to true (authorize) or false (deny).
*
* If the read is approved and params->data is unchanged (NULL),
* the current characteristic value will be used.
*
* If the read is approved, a new value can be provided by setting
* the params->data pointer and params->len fields.
*
* @return true if the read is authorized to proceed.
*/
GattAuthCallbackReply_t authorizeRead(GattReadAuthCallbackParams *params) {
if (!isReadAuthorizationEnabled()) {
return AUTH_CALLBACK_REPLY_SUCCESS;
}
params->authorizationReply = AUTH_CALLBACK_REPLY_SUCCESS; /* Initialized to no-error by default. */
readAuthorizationCallback.call(params);
return params->authorizationReply;
}
/* accessors */
public:
GattAttribute& getValueAttribute() {return _valueAttribute; }
const GattAttribute& getValueAttribute() const {return _valueAttribute; }
GattAttribute::Handle_t getValueHandle(void) const {return getValueAttribute().getHandle();}
uint8_t getProperties(void) const {return _properties; }
SecurityManager::SecurityMode_t getRequiredSecurity() const {return _requiredSecurity; }
uint8_t getDescriptorCount(void) const {return _descriptorCount; }
bool isReadAuthorizationEnabled() const {return enabledReadAuthorization; }
bool isWriteAuthorizationEnabled() const {return enabledWriteAuthorization; }
GattAttribute *getDescriptor(uint8_t index) {
if (index >= _descriptorCount) {
return NULL;
}
return _descriptors[index];
}
private:
GattAttribute _valueAttribute;
uint8_t _properties;
SecurityManager::SecurityMode_t _requiredSecurity;
GattAttribute **_descriptors;
uint8_t _descriptorCount;
bool enabledReadAuthorization;
bool enabledWriteAuthorization;
FunctionPointerWithContext<GattReadAuthCallbackParams *> readAuthorizationCallback;
FunctionPointerWithContext<GattWriteAuthCallbackParams *> writeAuthorizationCallback;
private:
/* Disallow copy and assignment. */
GattCharacteristic(const GattCharacteristic &);
GattCharacteristic& operator=(const GattCharacteristic &);
};
template <typename T>
class ReadOnlyGattCharacteristic : public GattCharacteristic {
public:
ReadOnlyGattCharacteristic<T>(const UUID &uuid,
T *valuePtr,
uint8_t additionalProperties = BLE_GATT_CHAR_PROPERTIES_NONE,
GattAttribute *descriptors[] = NULL,
unsigned numDescriptors = 0) :
GattCharacteristic(uuid, reinterpret_cast<uint8_t *>(valuePtr), sizeof(T), sizeof(T),
BLE_GATT_CHAR_PROPERTIES_READ | additionalProperties, descriptors, numDescriptors, false) {
/* empty */
}
};
template <typename T>
class WriteOnlyGattCharacteristic : public GattCharacteristic {
public:
WriteOnlyGattCharacteristic<T>(const UUID &uuid,
T *valuePtr,
uint8_t additionalProperties = BLE_GATT_CHAR_PROPERTIES_NONE,
GattAttribute *descriptors[] = NULL,
unsigned numDescriptors = 0) :
GattCharacteristic(uuid, reinterpret_cast<uint8_t *>(valuePtr), sizeof(T), sizeof(T),
BLE_GATT_CHAR_PROPERTIES_WRITE | additionalProperties, descriptors, numDescriptors) {
/* empty */
}
};
template <typename T>
class ReadWriteGattCharacteristic : public GattCharacteristic {
public:
ReadWriteGattCharacteristic<T>(const UUID &uuid,
T *valuePtr,
uint8_t additionalProperties = BLE_GATT_CHAR_PROPERTIES_NONE,
GattAttribute *descriptors[] = NULL,
unsigned numDescriptors = 0) :
GattCharacteristic(uuid, reinterpret_cast<uint8_t *>(valuePtr), sizeof(T), sizeof(T),
BLE_GATT_CHAR_PROPERTIES_READ | BLE_GATT_CHAR_PROPERTIES_WRITE | additionalProperties, descriptors, numDescriptors) {
/* empty */
}
};
template <typename T, unsigned NUM_ELEMENTS>
class WriteOnlyArrayGattCharacteristic : public GattCharacteristic {
public:
WriteOnlyArrayGattCharacteristic<T, NUM_ELEMENTS>(const UUID &uuid,
T valuePtr[NUM_ELEMENTS],
uint8_t additionalProperties = BLE_GATT_CHAR_PROPERTIES_NONE,
GattAttribute *descriptors[] = NULL,
unsigned numDescriptors = 0) :
GattCharacteristic(uuid, reinterpret_cast<uint8_t *>(valuePtr), sizeof(T) * NUM_ELEMENTS, sizeof(T) * NUM_ELEMENTS,
BLE_GATT_CHAR_PROPERTIES_WRITE | additionalProperties, descriptors, numDescriptors) {
/* empty */
}
};
template <typename T, unsigned NUM_ELEMENTS>
class ReadOnlyArrayGattCharacteristic : public GattCharacteristic {
public:
ReadOnlyArrayGattCharacteristic<T, NUM_ELEMENTS>(const UUID &uuid,
T valuePtr[NUM_ELEMENTS],
uint8_t additionalProperties = BLE_GATT_CHAR_PROPERTIES_NONE,
GattAttribute *descriptors[] = NULL,
unsigned numDescriptors = 0) :
GattCharacteristic(uuid, reinterpret_cast<uint8_t *>(valuePtr), sizeof(T) * NUM_ELEMENTS, sizeof(T) * NUM_ELEMENTS,
BLE_GATT_CHAR_PROPERTIES_READ | additionalProperties, descriptors, numDescriptors, false) {
/* empty */
}
};
template <typename T, unsigned NUM_ELEMENTS>
class ReadWriteArrayGattCharacteristic : public GattCharacteristic {
public:
ReadWriteArrayGattCharacteristic<T, NUM_ELEMENTS>(const UUID &uuid,
T valuePtr[NUM_ELEMENTS],
uint8_t additionalProperties = BLE_GATT_CHAR_PROPERTIES_NONE,
GattAttribute *descriptors[] = NULL,
unsigned numDescriptors = 0) :
GattCharacteristic(uuid, reinterpret_cast<uint8_t *>(valuePtr), sizeof(T) * NUM_ELEMENTS, sizeof(T) * NUM_ELEMENTS,
BLE_GATT_CHAR_PROPERTIES_READ | BLE_GATT_CHAR_PROPERTIES_WRITE | additionalProperties, descriptors, numDescriptors) {
/* empty */
}
};
#endif // ifndef __GATT_CHARACTERISTIC_H__