add "LE Device Address" 0x1B to advertising data types

Fork of BLE_API by Bluetooth Low Energy

ble/blecommon.h

Committer:
vcoubard
Date:
2016-01-11
Revision:
1104:0244fbb0324e
Parent:
1100:c3d484a482d8
Child:
1106:1a25c4e7407a

File content as of revision 1104:0244fbb0324e:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef __BLE_COMMON_H__
#define __BLE_COMMON_H__

#ifdef __cplusplus
extern "C" {
#endif


/*! @brief Assigned values for BLE UUIDs. */
enum {
    BLE_UUID_UNKNOWN                             = 0x0000, /**< Reserved UUID. */
    BLE_UUID_SERVICE_PRIMARY                     = 0x2800, /**< Primary Service. */
    BLE_UUID_SERVICE_SECONDARY                   = 0x2801, /**< Secondary Service. */
    BLE_UUID_SERVICE_INCLUDE                     = 0x2802, /**< Include. */
    BLE_UUID_CHARACTERISTIC                      = 0x2803, /**< Characteristic. */
    BLE_UUID_DESCRIPTOR_CHAR_EXT_PROP            = 0x2900, /**< Characteristic Extended Properties Descriptor. */
    BLE_UUID_DESCRIPTOR_CHAR_USER_DESC           = 0x2901, /**< Characteristic User Description Descriptor. */
    BLE_UUID_DESCRIPTOR_CLIENT_CHAR_CONFIG       = 0x2902, /**< Client Characteristic Configuration Descriptor. */
    BLE_UUID_DESCRIPTOR_SERVER_CHAR_CONFIG       = 0x2903, /**< Server Characteristic Configuration Descriptor. */
    BLE_UUID_DESCRIPTOR_CHAR_PRESENTATION_FORMAT = 0x2904, /**< Characteristic Presentation Format Descriptor. */
    BLE_UUID_DESCRIPTOR_CHAR_AGGREGATE_FORMAT    = 0x2905, /**< Characteristic Aggregate Format Descriptor. */

/* GATT specific UUIDs */
    BLE_UUID_GATT                                = 0x1801, /**< Generic Attribute Profile. */
    BLE_UUID_GATT_CHARACTERISTIC_SERVICE_CHANGED = 0x2A05, /**< Service Changed Characteristic. */

/* GAP specific UUIDs */
    BLE_UUID_GAP                                 = 0x1800, /**< Generic Access Profile. */
    BLE_UUID_GAP_CHARACTERISTIC_DEVICE_NAME      = 0x2A00, /**< Device Name Characteristic. */
    BLE_UUID_GAP_CHARACTERISTIC_APPEARANCE       = 0x2A01, /**< Appearance Characteristic. */
    BLE_UUID_GAP_CHARACTERISTIC_PPF              = 0x2A02, /**< Peripheral Privacy Flag Characteristic. */
    BLE_UUID_GAP_CHARACTERISTIC_RECONN_ADDR      = 0x2A03, /**< Reconnection Address Characteristic. */
    BLE_UUID_GAP_CHARACTERISTIC_PPCP             = 0x2A04, /**< Peripheral Preferred Connection Parameters Characteristic. */
};

/*! @brief Error codes for the BLE API. */
enum ble_error_t {
    BLE_ERROR_NONE                      = 0, /**< No error. */
    BLE_ERROR_BUFFER_OVERFLOW           = 1, /**< The requested action would cause a buffer overflow and has been aborted. */
    BLE_ERROR_NOT_IMPLEMENTED           = 2, /**< Requested a feature that isn't yet implemented or isn't supported by the target HW. */
    BLE_ERROR_PARAM_OUT_OF_RANGE        = 3, /**< One of the supplied parameters is outside the valid range. */
    BLE_ERROR_INVALID_PARAM             = 4, /**< One of the supplied parameters is invalid. */
    BLE_STACK_BUSY                      = 5, /**< The stack is busy. */
    BLE_ERROR_INVALID_STATE             = 6, /**< Invalid state. */
    BLE_ERROR_NO_MEM                    = 7, /**< Out of memory */
    BLE_ERROR_OPERATION_NOT_PERMITTED   = 8,
    BLE_ERROR_INITIALIZATION_INCOMPLETE = 9,
    BLE_ERROR_ALREADY_INITIALIZED       = 10,
    BLE_ERROR_UNSPECIFIED               = 11, /**< Unknown error. */
};

/** @brief Default MTU size. */
static const unsigned BLE_GATT_MTU_SIZE_DEFAULT = 23;

enum HVXType_t {
    BLE_HVX_NOTIFICATION = 0x01,  /**< Handle Value Notification. */
    BLE_HVX_INDICATION   = 0x02,  /**< Handle Value Indication. */
};

#ifdef __cplusplus
}
#endif

#endif // ifndef __BLE_COMMON_H__