Andrew Fox / BLE_API

add "LE Device Address" 0x1B to advertising data types

Fork of BLE_API by Bluetooth Low Energy

ble/Gap.h@1108:ce7f6dbab398, 2016-01-11 (annotated)

Committer:
vcoubard
Date:
Mon Jan 11 08:51:57 2016 +0000
Revision:
1108:ce7f6dbab398
Parent:
1107:93b0b9304c53
Child:
1109:09e9c8c2a5bb
Synchronized with git rev ec7df38a

Author: Liyou Zhou

Add deprecated message to Gap::connect overload function

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 710:b2e1a2660ec2 1 /* mbed Microcontroller Library
rgrover1 710:b2e1a2660ec2 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 710:b2e1a2660ec2 3 *
rgrover1 710:b2e1a2660ec2 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 710:b2e1a2660ec2 5 * you may not use this file except in compliance with the License.
rgrover1 710:b2e1a2660ec2 6 * You may obtain a copy of the License at
rgrover1 710:b2e1a2660ec2 7 *
rgrover1 710:b2e1a2660ec2 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 710:b2e1a2660ec2 9 *
rgrover1 710:b2e1a2660ec2 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 710:b2e1a2660ec2 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 710:b2e1a2660ec2 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 710:b2e1a2660ec2 13 * See the License for the specific language governing permissions and
rgrover1 710:b2e1a2660ec2 14 * limitations under the License.
rgrover1 710:b2e1a2660ec2 15 */
rgrover1 710:b2e1a2660ec2 16
rgrover1 710:b2e1a2660ec2 17 #ifndef __GAP_H__
rgrover1 710:b2e1a2660ec2 18 #define __GAP_H__
rgrover1 710:b2e1a2660ec2 19
vcoubard 1078:79c089630b38 20 #include "ble/BLEProtocol.h"
rgrover1 710:b2e1a2660ec2 21 #include "GapAdvertisingData.h"
rgrover1 710:b2e1a2660ec2 22 #include "GapAdvertisingParams.h"
rgrover1 710:b2e1a2660ec2 23 #include "GapScanningParams.h"
rgrover1 710:b2e1a2660ec2 24 #include "GapEvents.h"
rgrover1 829:9072de50087b 25 #include "CallChainOfFunctionPointersWithContext.h"
rgrover1 710:b2e1a2660ec2 26 #include "FunctionPointerWithContext.h"
vcoubard 1108:ce7f6dbab398 27 #include "deprecate.h"
rgrover1 710:b2e1a2660ec2 28
vcoubard 1048:efb29faf12fc 29 /* Forward declarations for classes that will only be used for pointers or references in the following. */
rgrover1 710:b2e1a2660ec2 30 class GapAdvertisingParams;
rgrover1 710:b2e1a2660ec2 31 class GapScanningParams;
rgrover1 710:b2e1a2660ec2 32 class GapAdvertisingData;
rgrover1 710:b2e1a2660ec2 33
rgrover1 710:b2e1a2660ec2 34 class Gap {
vcoubard 1078:79c089630b38 35 /*
vcoubard 1078:79c089630b38 36 * DEPRECATION ALERT: all of the APIs in this `public` block are deprecated.
vcoubard 1078:79c089630b38 37 * They have been relocated to the class BLEProtocol.
vcoubard 1078:79c089630b38 38 */
rgrover1 710:b2e1a2660ec2 39 public:
vcoubard 1078:79c089630b38 40 /**
vcoubard 1078:79c089630b38 41 * Address-type for BLEProtocol addresses.
vcoubard 1091:58b2dac13261 42 *
vcoubard 1086:75d4e8ce277d 43 * @note: deprecated. Use BLEProtocol::AddressType_t instead.
vcoubard 1078:79c089630b38 44 */
vcoubard 1086:75d4e8ce277d 45 typedef BLEProtocol::AddressType_t AddressType_t;
vcoubard 1086:75d4e8ce277d 46
vcoubard 1086:75d4e8ce277d 47 /**
vcoubard 1086:75d4e8ce277d 48 * Address-type for BLEProtocol addresses.
vcoubard 1086:75d4e8ce277d 49 * @note: deprecated. Use BLEProtocol::AddressType_t instead.
vcoubard 1087:4c6e11878033 50 */
vcoubard 1087:4c6e11878033 51 typedef BLEProtocol::AddressType_t addr_type_t;
vcoubard 1087:4c6e11878033 52
vcoubard 1091:58b2dac13261 53 /**
vcoubard 1091:58b2dac13261 54 * Address-type for BLEProtocol addresses.
vcoubard 1108:ce7f6dbab398 55 * \deprecated: Use BLEProtocol::AddressType_t instead.
vcoubard 1091:58b2dac13261 56 *
vcoubard 1091:58b2dac13261 57 * DEPRECATION ALERT: The following constants have been left in their
vcoubard 1091:58b2dac13261 58 * deprecated state to transparenly support existing applications which may
vcoubard 1091:58b2dac13261 59 * have used Gap::ADDR_TYPE_*.
vcoubard 1091:58b2dac13261 60 */
vcoubard 1108:ce7f6dbab398 61 enum DeprecatedAddressType_t {
vcoubard 1091:58b2dac13261 62 ADDR_TYPE_PUBLIC = BLEProtocol::AddressType::PUBLIC,
vcoubard 1091:58b2dac13261 63 ADDR_TYPE_RANDOM_STATIC = BLEProtocol::AddressType::RANDOM_STATIC,
vcoubard 1091:58b2dac13261 64 ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_RESOLVABLE,
vcoubard 1091:58b2dac13261 65 ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_NON_RESOLVABLE
vcoubard 1091:58b2dac13261 66 };
vcoubard 1091:58b2dac13261 67
vcoubard 1078:79c089630b38 68 static const unsigned ADDR_LEN = BLEProtocol::ADDR_LEN; /**< Length (in octets) of the BLE MAC address. */
vcoubard 1078:79c089630b38 69 typedef BLEProtocol::Address_t Address_t; /**< 48-bit address, LSB format. @Note: Deprecated. Use BLEProtocol::Address_t instead. */
vcoubard 1078:79c089630b38 70 typedef BLEProtocol::Address_t address_t; /**< 48-bit address, LSB format. @Note: Deprecated. Use BLEProtocol::Address_t instead. */
vcoubard 1078:79c089630b38 71
vcoubard 1078:79c089630b38 72 public:
rgrover1 710:b2e1a2660ec2 73 enum TimeoutSource_t {
rgrover1 710:b2e1a2660ec2 74 TIMEOUT_SRC_ADVERTISING = 0x00, /**< Advertising timeout. */
rgrover1 710:b2e1a2660ec2 75 TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /**< Security request timeout. */
rgrover1 710:b2e1a2660ec2 76 TIMEOUT_SRC_SCAN = 0x02, /**< Scanning timeout. */
rgrover1 710:b2e1a2660ec2 77 TIMEOUT_SRC_CONN = 0x03, /**< Connection timeout. */
rgrover1 710:b2e1a2660ec2 78 };
rgrover1 710:b2e1a2660ec2 79
rgrover1 710:b2e1a2660ec2 80 /**
rgrover1 710:b2e1a2660ec2 81 * Enumeration for disconnection reasons. The values for these reasons are
vcoubard 1048:efb29faf12fc 82 * derived from Nordic's implementation, but the reasons are meant to be
vcoubard 1048:efb29faf12fc 83 * independent of the transport. If you are returned a reason that is not
vcoubard 1048:efb29faf12fc 84 * covered by this enumeration, please refer to the underlying
rgrover1 710:b2e1a2660ec2 85 * transport library.
rgrover1 710:b2e1a2660ec2 86 */
rgrover1 710:b2e1a2660ec2 87 enum DisconnectionReason_t {
rgrover1 710:b2e1a2660ec2 88 CONNECTION_TIMEOUT = 0x08,
rgrover1 710:b2e1a2660ec2 89 REMOTE_USER_TERMINATED_CONNECTION = 0x13,
vcoubard 1048:efb29faf12fc 90 REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /**< Remote device terminated connection due to low resources.*/
vcoubard 1048:efb29faf12fc 91 REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /**< Remote device terminated connection due to power off. */
rgrover1 710:b2e1a2660ec2 92 LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
rgrover1 710:b2e1a2660ec2 93 CONN_INTERVAL_UNACCEPTABLE = 0x3B,
rgrover1 710:b2e1a2660ec2 94 };
rgrover1 710:b2e1a2660ec2 95
vcoubard 1048:efb29faf12fc 96 /* Describes the current state of the device (more than one bit can be set). */
rgrover1 710:b2e1a2660ec2 97 struct GapState_t {
vcoubard 1048:efb29faf12fc 98 unsigned advertising : 1; /**< Peripheral is currently advertising. */
vcoubard 1048:efb29faf12fc 99 unsigned connected : 1; /**< Peripheral is connected to a central. */
rgrover1 710:b2e1a2660ec2 100 };
rgrover1 710:b2e1a2660ec2 101
rgrover1 710:b2e1a2660ec2 102 typedef uint16_t Handle_t; /* Type for connection handle. */
rgrover1 710:b2e1a2660ec2 103
rgrover1 710:b2e1a2660ec2 104 typedef struct {
rgrover1 710:b2e1a2660ec2 105 uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 106 uint16_t maxConnectionInterval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 107 uint16_t slaveLatency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 108 uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 109 } ConnectionParams_t;
rgrover1 710:b2e1a2660ec2 110
rgrover1 710:b2e1a2660ec2 111 enum Role_t {
rgrover1 710:b2e1a2660ec2 112 PERIPHERAL = 0x1, /**< Peripheral Role. */
rgrover1 710:b2e1a2660ec2 113 CENTRAL = 0x2, /**< Central Role. */
rgrover1 710:b2e1a2660ec2 114 };
rgrover1 710:b2e1a2660ec2 115
rgrover1 710:b2e1a2660ec2 116 struct AdvertisementCallbackParams_t {
vcoubard 1079:6e2d9514f3df 117 BLEProtocol::Address_t peerAddr;
vcoubard 1079:6e2d9514f3df 118 int8_t rssi;
vcoubard 1079:6e2d9514f3df 119 bool isScanResponse;
vcoubard 1079:6e2d9514f3df 120 GapAdvertisingParams::AdvertisingType_t type;
vcoubard 1079:6e2d9514f3df 121 uint8_t advertisingDataLen;
vcoubard 1079:6e2d9514f3df 122 const uint8_t *advertisingData;
rgrover1 710:b2e1a2660ec2 123 };
rgrover1 710:b2e1a2660ec2 124 typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
rgrover1 710:b2e1a2660ec2 125
rgrover1 710:b2e1a2660ec2 126 struct ConnectionCallbackParams_t {
vcoubard 1078:79c089630b38 127 Handle_t handle;
vcoubard 1078:79c089630b38 128 Role_t role;
vcoubard 1078:79c089630b38 129 BLEProtocol::AddressType_t peerAddrType;
vcoubard 1079:6e2d9514f3df 130 BLEProtocol::Address_t peerAddr;
vcoubard 1078:79c089630b38 131 BLEProtocol::AddressType_t ownAddrType;
vcoubard 1079:6e2d9514f3df 132 BLEProtocol::Address_t ownAddr;
vcoubard 1078:79c089630b38 133 const ConnectionParams_t *connectionParams;
rgrover1 710:b2e1a2660ec2 134
vcoubard 1078:79c089630b38 135 ConnectionCallbackParams_t(Handle_t handleIn,
vcoubard 1078:79c089630b38 136 Role_t roleIn,
vcoubard 1078:79c089630b38 137 BLEProtocol::AddressType_t peerAddrTypeIn,
vcoubard 1078:79c089630b38 138 const uint8_t *peerAddrIn,
vcoubard 1078:79c089630b38 139 BLEProtocol::AddressType_t ownAddrTypeIn,
vcoubard 1078:79c089630b38 140 const uint8_t *ownAddrIn,
vcoubard 1078:79c089630b38 141 const ConnectionParams_t *connectionParamsIn) :
rgrover1 710:b2e1a2660ec2 142 handle(handleIn),
rgrover1 710:b2e1a2660ec2 143 role(roleIn),
rgrover1 710:b2e1a2660ec2 144 peerAddrType(peerAddrTypeIn),
rgrover1 710:b2e1a2660ec2 145 peerAddr(),
rgrover1 710:b2e1a2660ec2 146 ownAddrType(ownAddrTypeIn),
rgrover1 710:b2e1a2660ec2 147 ownAddr(),
rgrover1 710:b2e1a2660ec2 148 connectionParams(connectionParamsIn) {
rgrover1 710:b2e1a2660ec2 149 memcpy(peerAddr, peerAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 150 memcpy(ownAddr, ownAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 151 }
rgrover1 710:b2e1a2660ec2 152 };
rgrover1 710:b2e1a2660ec2 153
rgrover1 829:9072de50087b 154 struct DisconnectionCallbackParams_t {
rgrover1 829:9072de50087b 155 Handle_t handle;
rgrover1 829:9072de50087b 156 DisconnectionReason_t reason;
rgrover1 829:9072de50087b 157
rgrover1 829:9072de50087b 158 DisconnectionCallbackParams_t(Handle_t handleIn,
rgrover1 829:9072de50087b 159 DisconnectionReason_t reasonIn) :
rgrover1 829:9072de50087b 160 handle(handleIn),
rgrover1 829:9072de50087b 161 reason(reasonIn)
rgrover1 829:9072de50087b 162 {}
rgrover1 829:9072de50087b 163 };
rgrover1 829:9072de50087b 164
rgrover1 710:b2e1a2660ec2 165 static const uint16_t UNIT_1_25_MS = 1250; /**< Number of microseconds in 1.25 milliseconds. */
rgrover1 710:b2e1a2660ec2 166 static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
rgrover1 710:b2e1a2660ec2 167 return (durationInMillis * 1000) / UNIT_1_25_MS;
rgrover1 710:b2e1a2660ec2 168 }
rgrover1 766:03f1a26f132f 169
vcoubard 1052:b55e1ad3e1b3 170 typedef FunctionPointerWithContext<TimeoutSource_t> TimeoutEventCallback_t;
vcoubard 1052:b55e1ad3e1b3 171 typedef CallChainOfFunctionPointersWithContext<TimeoutSource_t> TimeoutEventCallbackChain_t;
rgrover1 710:b2e1a2660ec2 172
vcoubard 1052:b55e1ad3e1b3 173 typedef FunctionPointerWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallback_t;
vcoubard 1052:b55e1ad3e1b3 174 typedef CallChainOfFunctionPointersWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallbackChain_t;
vcoubard 1052:b55e1ad3e1b3 175
vcoubard 1052:b55e1ad3e1b3 176 typedef FunctionPointerWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallback_t;
vcoubard 1054:f59e5d9a992a 177 typedef CallChainOfFunctionPointersWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallbackChain_t;
vcoubard 1052:b55e1ad3e1b3 178
rgrover1 753:0f60274cd3ad 179 typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
rgrover1 710:b2e1a2660ec2 180
vcoubard 1090:148d8b9b56a5 181 typedef FunctionPointerWithContext<const Gap *> GapShutdownCallback_t;
vcoubard 1090:148d8b9b56a5 182 typedef CallChainOfFunctionPointersWithContext<const Gap *> GapShutdownCallbackChain_t;
vcoubard 1090:148d8b9b56a5 183
rgrover1 710:b2e1a2660ec2 184 /*
rgrover1 710:b2e1a2660ec2 185 * The following functions are meant to be overridden in the platform-specific sub-class.
rgrover1 710:b2e1a2660ec2 186 */
rgrover1 710:b2e1a2660ec2 187 public:
rgrover1 710:b2e1a2660ec2 188 /**
rgrover1 710:b2e1a2660ec2 189 * Set the BTLE MAC address and type. Please note that the address format is
vcoubard 1079:6e2d9514f3df 190 * least significant byte first (LSB). Please refer to BLEProtocol::Address_t.
rgrover1 710:b2e1a2660ec2 191 *
rgrover1 710:b2e1a2660ec2 192 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 193 */
vcoubard 1079:6e2d9514f3df 194 virtual ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::Address_t address) {
rgrover1 734:4872b70437ce 195 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 196 (void)type;
rgrover1 734:4872b70437ce 197 (void)address;
rgrover1 734:4872b70437ce 198
rgrover1 728:997ba5e7b3b6 199 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 200 }
rgrover1 710:b2e1a2660ec2 201
rgrover1 710:b2e1a2660ec2 202 /**
rgrover1 710:b2e1a2660ec2 203 * Fetch the BTLE MAC address and type.
rgrover1 710:b2e1a2660ec2 204 *
rgrover1 710:b2e1a2660ec2 205 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 206 */
vcoubard 1079:6e2d9514f3df 207 virtual ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::Address_t address) {
vcoubard 1048:efb29faf12fc 208 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 209 (void)typeP;
rgrover1 734:4872b70437ce 210 (void)address;
rgrover1 734:4872b70437ce 211
rgrover1 728:997ba5e7b3b6 212 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 213 }
rgrover1 710:b2e1a2660ec2 214
rgrover1 710:b2e1a2660ec2 215 /**
vcoubard 1056:ce2fb3d09929 216 * @return Minimum Advertising interval in milliseconds for connectable
vcoubard 1056:ce2fb3d09929 217 * undirected and connectable directed event types.
rgrover1 710:b2e1a2660ec2 218 */
rgrover1 710:b2e1a2660ec2 219 virtual uint16_t getMinAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 220 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 221 }
rgrover1 710:b2e1a2660ec2 222
rgrover1 710:b2e1a2660ec2 223 /**
vcoubard 1056:ce2fb3d09929 224 * @return Minimum Advertising interval in milliseconds for scannable
vcoubard 1056:ce2fb3d09929 225 * undirected and non-connectable undirected event types.
rgrover1 710:b2e1a2660ec2 226 */
rgrover1 710:b2e1a2660ec2 227 virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 228 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 229 }
rgrover1 710:b2e1a2660ec2 230
rgrover1 710:b2e1a2660ec2 231 /**
rgrover1 710:b2e1a2660ec2 232 * @return Maximum Advertising interval in milliseconds.
rgrover1 710:b2e1a2660ec2 233 */
rgrover1 710:b2e1a2660ec2 234 virtual uint16_t getMaxAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 235 return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 236 }
rgrover1 710:b2e1a2660ec2 237
rgrover1 710:b2e1a2660ec2 238 virtual ble_error_t stopAdvertising(void) {
rgrover1 728:997ba5e7b3b6 239 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 240 }
rgrover1 710:b2e1a2660ec2 241
rgrover1 710:b2e1a2660ec2 242 /**
rgrover1 710:b2e1a2660ec2 243 * Stop scanning. The current scanning parameters remain in effect.
rgrover1 710:b2e1a2660ec2 244 *
rgrover1 710:b2e1a2660ec2 245 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1 710:b2e1a2660ec2 246 */
rgrover1 710:b2e1a2660ec2 247 virtual ble_error_t stopScan() {
rgrover1 728:997ba5e7b3b6 248 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 249 }
rgrover1 710:b2e1a2660ec2 250
rgrover1 710:b2e1a2660ec2 251 /**
rgrover1 710:b2e1a2660ec2 252 * Create a connection (GAP Link Establishment).
rgrover1 710:b2e1a2660ec2 253 *
rgrover1 710:b2e1a2660ec2 254 * @param peerAddr
rgrover1 710:b2e1a2660ec2 255 * 48-bit address, LSB format.
rgrover1 710:b2e1a2660ec2 256 * @param peerAddrType
rgrover1 710:b2e1a2660ec2 257 * Address type of the peer.
rgrover1 710:b2e1a2660ec2 258 * @param connectionParams
rgrover1 710:b2e1a2660ec2 259 * Connection parameters.
rgrover1 710:b2e1a2660ec2 260 * @param scanParams
rgrover1 710:b2e1a2660ec2 261 * Paramters to be used while scanning for the peer.
rgrover1 710:b2e1a2660ec2 262 * @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1 829:9072de50087b 263 * successfully. The connectionCallChain (if set) will be invoked upon
rgrover1 710:b2e1a2660ec2 264 * a connection event.
rgrover1 710:b2e1a2660ec2 265 */
vcoubard 1079:6e2d9514f3df 266 virtual ble_error_t connect(const BLEProtocol::Address_t peerAddr,
vcoubard 1079:6e2d9514f3df 267 BLEProtocol::AddressType_t peerAddrType,
vcoubard 1079:6e2d9514f3df 268 const ConnectionParams_t *connectionParams,
vcoubard 1079:6e2d9514f3df 269 const GapScanningParams *scanParams) {
vcoubard 1048:efb29faf12fc 270 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 271 (void)peerAddr;
rgrover1 734:4872b70437ce 272 (void)peerAddrType;
rgrover1 734:4872b70437ce 273 (void)connectionParams;
rgrover1 734:4872b70437ce 274 (void)scanParams;
rgrover1 734:4872b70437ce 275
rgrover1 728:997ba5e7b3b6 276 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 277 }
rgrover1 710:b2e1a2660ec2 278
rgrover1 710:b2e1a2660ec2 279 /**
vcoubard 1107:93b0b9304c53 280 * Create a connection (GAP Link Establishment).
vcoubard 1107:93b0b9304c53 281 *
vcoubard 1107:93b0b9304c53 282 * @note: deprecated. This funtion overloads Gap::connect(const BLEProtocol::Address_t peerAddr,
vcoubard 1107:93b0b9304c53 283 BLEProtocol::AddressType_t peerAddrType,
vcoubard 1107:93b0b9304c53 284 const ConnectionParams_t *connectionParams,
vcoubard 1107:93b0b9304c53 285 const GapScanningParams *scanParams)
vcoubard 1107:93b0b9304c53 286 * to maintain backward compatibility for change from Gap::AddressType_t to BLEProtocol::AddressType_t
vcoubard 1107:93b0b9304c53 287 */
vcoubard 1107:93b0b9304c53 288 ble_error_t connect(const BLEProtocol::Address_t peerAddr,
vcoubard 1108:ce7f6dbab398 289 DeprecatedAddressType_t peerAddrType,
vcoubard 1107:93b0b9304c53 290 const ConnectionParams_t *connectionParams,
vcoubard 1108:ce7f6dbab398 291 const GapScanningParams *scanParams)
vcoubard 1108:ce7f6dbab398 292 __deprecated_message("Gap::DeprecatedAddressType_t is deprecated, use BLEProtocol::AddressType_t instead") {
vcoubard 1107:93b0b9304c53 293 return connect(peerAddr, (BLEProtocol::AddressType_t) peerAddrType, connectionParams, scanParams);
vcoubard 1107:93b0b9304c53 294 }
vcoubard 1107:93b0b9304c53 295
vcoubard 1107:93b0b9304c53 296 /**
rgrover1 710:b2e1a2660ec2 297 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 298 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 299 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 300 *
rgrover1 710:b2e1a2660ec2 301 * @param reason
vcoubard 1048:efb29faf12fc 302 * The reason for disconnection; to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 303 */
rgrover1 710:b2e1a2660ec2 304 virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
rgrover1 734:4872b70437ce 305 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 306 (void)connectionHandle;
rgrover1 734:4872b70437ce 307 (void)reason;
rgrover1 734:4872b70437ce 308
rgrover1 728:997ba5e7b3b6 309 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 310 }
rgrover1 710:b2e1a2660ec2 311
rgrover1 710:b2e1a2660ec2 312 /**
rgrover1 710:b2e1a2660ec2 313 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 314 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 315 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 316 *
rgrover1 710:b2e1a2660ec2 317 * @param reason
vcoubard 1048:efb29faf12fc 318 * The reason for disconnection; to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 319 *
vcoubard 1048:efb29faf12fc 320 * @note: This version of disconnect() doesn't take a connection handle. It
vcoubard 1048:efb29faf12fc 321 * works reliably only for stacks that are limited to a single
rgrover1 710:b2e1a2660ec2 322 * connection. This API should be considered *deprecated* in favour of the
vcoubard 1048:efb29faf12fc 323 * alternative, which takes a connection handle. It will be dropped in the future.
rgrover1 710:b2e1a2660ec2 324 */
rgrover1 710:b2e1a2660ec2 325 virtual ble_error_t disconnect(DisconnectionReason_t reason) {
vcoubard 1048:efb29faf12fc 326 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 327 (void)reason;
rgrover1 734:4872b70437ce 328
rgrover1 728:997ba5e7b3b6 329 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 330 }
rgrover1 710:b2e1a2660ec2 331
rgrover1 710:b2e1a2660ec2 332 /**
rgrover1 710:b2e1a2660ec2 333 * Get the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 334 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 335 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 336 *
rgrover1 710:b2e1a2660ec2 337 * @param[out] params
rgrover1 710:b2e1a2660ec2 338 * The structure where the parameters will be stored. Memory
rgrover1 710:b2e1a2660ec2 339 * for this is owned by the caller.
rgrover1 710:b2e1a2660ec2 340 *
rgrover1 710:b2e1a2660ec2 341 * @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1 710:b2e1a2660ec2 342 * the given structure pointed to by params.
rgrover1 710:b2e1a2660ec2 343 */
rgrover1 710:b2e1a2660ec2 344 virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
vcoubard 1048:efb29faf12fc 345 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 346 (void)params;
rgrover1 734:4872b70437ce 347
rgrover1 728:997ba5e7b3b6 348 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 349 }
rgrover1 710:b2e1a2660ec2 350
rgrover1 710:b2e1a2660ec2 351 /**
rgrover1 710:b2e1a2660ec2 352 * Set the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 353 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 354 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 355 *
rgrover1 710:b2e1a2660ec2 356 * @param[in] params
rgrover1 710:b2e1a2660ec2 357 * The structure containing the desired parameters.
rgrover1 710:b2e1a2660ec2 358 */
rgrover1 710:b2e1a2660ec2 359 virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
vcoubard 1048:efb29faf12fc 360 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 361 (void)params;
rgrover1 734:4872b70437ce 362
rgrover1 728:997ba5e7b3b6 363 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 364 }
rgrover1 710:b2e1a2660ec2 365
rgrover1 710:b2e1a2660ec2 366 /**
rgrover1 816:2b4f0ef8c06e 367 * Update connection parameters.
vcoubard 1048:efb29faf12fc 368 * In the central role this will initiate a Link Layer connection parameter update procedure.
vcoubard 1048:efb29faf12fc 369 * In the peripheral role, this will send the corresponding L2CAP request and wait for
rgrover1 816:2b4f0ef8c06e 370 * the central to perform the procedure.
rgrover1 816:2b4f0ef8c06e 371 *
rgrover1 710:b2e1a2660ec2 372 * @param[in] handle
vcoubard 1048:efb29faf12fc 373 * Connection Handle.
rgrover1 710:b2e1a2660ec2 374 * @param[in] params
rgrover1 710:b2e1a2660ec2 375 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1 710:b2e1a2660ec2 376 * the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1 710:b2e1a2660ec2 377 */
rgrover1 710:b2e1a2660ec2 378 virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
rgrover1 734:4872b70437ce 379 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 380 (void)handle;
rgrover1 734:4872b70437ce 381 (void)params;
rgrover1 734:4872b70437ce 382
rgrover1 728:997ba5e7b3b6 383 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 384 }
rgrover1 710:b2e1a2660ec2 385
rgrover1 710:b2e1a2660ec2 386 /**
rgrover1 710:b2e1a2660ec2 387 * Set the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 388 * @param[in] deviceName
rgrover1 710:b2e1a2660ec2 389 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1 710:b2e1a2660ec2 390 */
rgrover1 710:b2e1a2660ec2 391 virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
vcoubard 1048:efb29faf12fc 392 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 393 (void)deviceName;
rgrover1 734:4872b70437ce 394
rgrover1 728:997ba5e7b3b6 395 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 396 }
rgrover1 710:b2e1a2660ec2 397
rgrover1 710:b2e1a2660ec2 398 /**
rgrover1 710:b2e1a2660ec2 399 * Get the value of the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 400 * @param[out] deviceName
rgrover1 710:b2e1a2660ec2 401 * Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1 710:b2e1a2660ec2 402 * terminated* string will be placed. Set this
rgrover1 710:b2e1a2660ec2 403 * value to NULL in order to obtain the deviceName-length
rgrover1 710:b2e1a2660ec2 404 * from the 'length' parameter.
rgrover1 710:b2e1a2660ec2 405 *
rgrover1 710:b2e1a2660ec2 406 * @param[in/out] lengthP
rgrover1 710:b2e1a2660ec2 407 * (on input) Length of the buffer pointed to by deviceName;
rgrover1 710:b2e1a2660ec2 408 * (on output) the complete device name length (without the
rgrover1 710:b2e1a2660ec2 409 * null terminator).
rgrover1 710:b2e1a2660ec2 410 *
rgrover1 710:b2e1a2660ec2 411 * @note If the device name is longer than the size of the supplied buffer,
rgrover1 710:b2e1a2660ec2 412 * length will return the complete device name length, and not the
rgrover1 710:b2e1a2660ec2 413 * number of bytes actually returned in deviceName. The application may
rgrover1 710:b2e1a2660ec2 414 * use this information to retry with a suitable buffer size.
rgrover1 710:b2e1a2660ec2 415 */
rgrover1 710:b2e1a2660ec2 416 virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
rgrover1 734:4872b70437ce 417 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 418 (void)deviceName;
rgrover1 734:4872b70437ce 419 (void)lengthP;
rgrover1 734:4872b70437ce 420
rgrover1 728:997ba5e7b3b6 421 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 422 }
rgrover1 710:b2e1a2660ec2 423
rgrover1 710:b2e1a2660ec2 424 /**
rgrover1 710:b2e1a2660ec2 425 * Set the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 426 * @param[in] appearance
rgrover1 710:b2e1a2660ec2 427 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 428 */
rgrover1 710:b2e1a2660ec2 429 virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
vcoubard 1048:efb29faf12fc 430 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 431 (void)appearance;
rgrover1 734:4872b70437ce 432
rgrover1 728:997ba5e7b3b6 433 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 434 }
rgrover1 710:b2e1a2660ec2 435
rgrover1 710:b2e1a2660ec2 436 /**
rgrover1 710:b2e1a2660ec2 437 * Get the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 438 * @param[out] appearance
rgrover1 710:b2e1a2660ec2 439 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 440 */
rgrover1 710:b2e1a2660ec2 441 virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
vcoubard 1048:efb29faf12fc 442 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 443 (void)appearanceP;
rgrover1 734:4872b70437ce 444
rgrover1 728:997ba5e7b3b6 445 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 446 }
rgrover1 710:b2e1a2660ec2 447
rgrover1 710:b2e1a2660ec2 448 /**
rgrover1 710:b2e1a2660ec2 449 * Set the radio's transmit power.
rgrover1 710:b2e1a2660ec2 450 * @param[in] txPower Radio transmit power in dBm.
rgrover1 710:b2e1a2660ec2 451 */
rgrover1 710:b2e1a2660ec2 452 virtual ble_error_t setTxPower(int8_t txPower) {
vcoubard 1048:efb29faf12fc 453 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 454 (void)txPower;
rgrover1 734:4872b70437ce 455
rgrover1 728:997ba5e7b3b6 456 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 457 }
rgrover1 710:b2e1a2660ec2 458
rgrover1 710:b2e1a2660ec2 459 /**
rgrover1 710:b2e1a2660ec2 460 * Query the underlying stack for permitted arguments for setTxPower().
rgrover1 710:b2e1a2660ec2 461 *
rgrover1 710:b2e1a2660ec2 462 * @param[out] valueArrayPP
rgrover1 710:b2e1a2660ec2 463 * Out parameter to receive the immutable array of Tx values.
rgrover1 710:b2e1a2660ec2 464 * @param[out] countP
rgrover1 710:b2e1a2660ec2 465 * Out parameter to receive the array's size.
rgrover1 710:b2e1a2660ec2 466 */
rgrover1 710:b2e1a2660ec2 467 virtual void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
vcoubard 1048:efb29faf12fc 468 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 469 (void)valueArrayPP;
rgrover1 734:4872b70437ce 470 (void)countP;
rgrover1 734:4872b70437ce 471
rgrover1 742:861ed7eb186d 472 *countP = 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 473 }
rgrover1 710:b2e1a2660ec2 474
rgrover1 710:b2e1a2660ec2 475 protected:
rgrover1 710:b2e1a2660ec2 476 /* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
rgrover1 710:b2e1a2660ec2 477 virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
rgrover1 772:b6d27ab66c94 478 (void)scanningParams;
rgrover1 728:997ba5e7b3b6 479 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 480 }
rgrover1 710:b2e1a2660ec2 481
rgrover1 710:b2e1a2660ec2 482 /*
rgrover1 710:b2e1a2660ec2 483 * APIs with non-virtual implementations.
rgrover1 710:b2e1a2660ec2 484 */
rgrover1 710:b2e1a2660ec2 485 public:
rgrover1 710:b2e1a2660ec2 486 /**
vcoubard 1048:efb29faf12fc 487 * Returns the current GAP state of the device using a bitmask that
vcoubard 1048:efb29faf12fc 488 * describes whether the device is advertising or connected.
rgrover1 710:b2e1a2660ec2 489 */
rgrover1 710:b2e1a2660ec2 490 GapState_t getState(void) const {
rgrover1 710:b2e1a2660ec2 491 return state;
rgrover1 710:b2e1a2660ec2 492 }
rgrover1 710:b2e1a2660ec2 493
rgrover1 710:b2e1a2660ec2 494 /**
rgrover1 710:b2e1a2660ec2 495 * Set the GAP advertising mode to use for this device.
rgrover1 710:b2e1a2660ec2 496 */
rgrover1 710:b2e1a2660ec2 497 void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
rgrover1 710:b2e1a2660ec2 498 _advParams.setAdvertisingType(advType);
rgrover1 710:b2e1a2660ec2 499 }
rgrover1 710:b2e1a2660ec2 500
rgrover1 710:b2e1a2660ec2 501 /**
rgrover1 710:b2e1a2660ec2 502 * @param[in] interval
rgrover1 710:b2e1a2660ec2 503 * Advertising interval in units of milliseconds. Advertising
rgrover1 710:b2e1a2660ec2 504 * is disabled if interval is 0. If interval is smaller than
rgrover1 710:b2e1a2660ec2 505 * the minimum supported value, then the minimum supported
rgrover1 710:b2e1a2660ec2 506 * value is used instead. This minimum value can be discovered
rgrover1 710:b2e1a2660ec2 507 * using getMinAdvertisingInterval().
rgrover1 710:b2e1a2660ec2 508 *
rgrover1 710:b2e1a2660ec2 509 * This field must be set to 0 if connectionMode is equal
rgrover1 710:b2e1a2660ec2 510 * to ADV_CONNECTABLE_DIRECTED.
rgrover1 710:b2e1a2660ec2 511 *
rgrover1 710:b2e1a2660ec2 512 * @note: Decreasing this value will allow central devices to detect a
vcoubard 1048:efb29faf12fc 513 * peripheral faster, at the expense of more power being used by the radio
rgrover1 710:b2e1a2660ec2 514 * due to the higher data transmit rate.
rgrover1 710:b2e1a2660ec2 515 *
rgrover1 710:b2e1a2660ec2 516 * @Note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1 710:b2e1a2660ec2 517 * 'interval' argument. That required an explicit conversion from
rgrover1 710:b2e1a2660ec2 518 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1 710:b2e1a2660ec2 519 * no longer required as the new units are milliseconds. Any application
vcoubard 1048:efb29faf12fc 520 * code depending on the old semantics needs to be updated accordingly.
rgrover1 710:b2e1a2660ec2 521 */
rgrover1 710:b2e1a2660ec2 522 void setAdvertisingInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 523 if (interval == 0) {
rgrover1 710:b2e1a2660ec2 524 stopAdvertising();
rgrover1 710:b2e1a2660ec2 525 } else if (interval < getMinAdvertisingInterval()) {
rgrover1 710:b2e1a2660ec2 526 interval = getMinAdvertisingInterval();
rgrover1 710:b2e1a2660ec2 527 }
rgrover1 786:d6d7087d8377 528 _advParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 529 }
rgrover1 710:b2e1a2660ec2 530
rgrover1 710:b2e1a2660ec2 531 /**
rgrover1 710:b2e1a2660ec2 532 * @param[in] timeout
rgrover1 710:b2e1a2660ec2 533 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1 710:b2e1a2660ec2 534 * and 16383). Use 0 to disable the advertising timeout.
rgrover1 710:b2e1a2660ec2 535 */
rgrover1 710:b2e1a2660ec2 536 void setAdvertisingTimeout(uint16_t timeout) {
rgrover1 710:b2e1a2660ec2 537 _advParams.setTimeout(timeout);
rgrover1 710:b2e1a2660ec2 538 }
rgrover1 710:b2e1a2660ec2 539
rgrover1 710:b2e1a2660ec2 540 /**
rgrover1 710:b2e1a2660ec2 541 * Start advertising.
rgrover1 710:b2e1a2660ec2 542 */
rgrover1 710:b2e1a2660ec2 543 ble_error_t startAdvertising(void) {
vcoubard 1048:efb29faf12fc 544 setAdvertisingData(); /* Update the underlying stack. */
rgrover1 710:b2e1a2660ec2 545 return startAdvertising(_advParams);
rgrover1 710:b2e1a2660ec2 546 }
rgrover1 710:b2e1a2660ec2 547
rgrover1 710:b2e1a2660ec2 548 /**
rgrover1 710:b2e1a2660ec2 549 * Reset any advertising payload prepared from prior calls to
rgrover1 710:b2e1a2660ec2 550 * accumulateAdvertisingPayload(). This automatically propagates the re-
vcoubard 1048:efb29faf12fc 551 * initialized advertising payload to the underlying stack.
rgrover1 710:b2e1a2660ec2 552 */
rgrover1 710:b2e1a2660ec2 553 void clearAdvertisingPayload(void) {
rgrover1 710:b2e1a2660ec2 554 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 555 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 556 }
rgrover1 710:b2e1a2660ec2 557
rgrover1 710:b2e1a2660ec2 558 /**
rgrover1 710:b2e1a2660ec2 559 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 560 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1048:efb29faf12fc 561 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 562 * small.
rgrover1 710:b2e1a2660ec2 563 *
rgrover1 710:b2e1a2660ec2 564 * @param[in] flags
rgrover1 710:b2e1a2660ec2 565 * The flags to be added. Please refer to
rgrover1 710:b2e1a2660ec2 566 * GapAdvertisingData::Flags for valid flags. Multiple
rgrover1 710:b2e1a2660ec2 567 * flags may be specified in combination.
rgrover1 710:b2e1a2660ec2 568 */
rgrover1 710:b2e1a2660ec2 569 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1 710:b2e1a2660ec2 570 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 571 if ((rc = _advPayload.addFlags(flags)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 572 return rc;
rgrover1 710:b2e1a2660ec2 573 }
rgrover1 710:b2e1a2660ec2 574
rgrover1 710:b2e1a2660ec2 575 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 576 }
rgrover1 710:b2e1a2660ec2 577
rgrover1 710:b2e1a2660ec2 578 /**
rgrover1 710:b2e1a2660ec2 579 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 580 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1048:efb29faf12fc 581 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 582 * small.
rgrover1 710:b2e1a2660ec2 583 *
rgrover1 710:b2e1a2660ec2 584 * @param app
rgrover1 710:b2e1a2660ec2 585 * The appearance of the peripheral.
rgrover1 710:b2e1a2660ec2 586 */
rgrover1 710:b2e1a2660ec2 587 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1 710:b2e1a2660ec2 588 setAppearance(app);
rgrover1 710:b2e1a2660ec2 589
rgrover1 710:b2e1a2660ec2 590 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 591 if ((rc = _advPayload.addAppearance(app)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 592 return rc;
rgrover1 710:b2e1a2660ec2 593 }
rgrover1 710:b2e1a2660ec2 594
rgrover1 710:b2e1a2660ec2 595 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 596 }
rgrover1 710:b2e1a2660ec2 597
rgrover1 710:b2e1a2660ec2 598 /**
rgrover1 710:b2e1a2660ec2 599 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 600 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1048:efb29faf12fc 601 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 602 * small.
rgrover1 710:b2e1a2660ec2 603 *
vcoubard 1048:efb29faf12fc 604 * @param power
rgrover1 764:1e560f0d45e1 605 * The max transmit power to be used by the controller (in dBm).
rgrover1 710:b2e1a2660ec2 606 */
rgrover1 710:b2e1a2660ec2 607 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1 710:b2e1a2660ec2 608 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 609 if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 610 return rc;
rgrover1 710:b2e1a2660ec2 611 }
rgrover1 710:b2e1a2660ec2 612
rgrover1 710:b2e1a2660ec2 613 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 614 }
rgrover1 710:b2e1a2660ec2 615
rgrover1 710:b2e1a2660ec2 616 /**
rgrover1 710:b2e1a2660ec2 617 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 618 * advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1 710:b2e1a2660ec2 619 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
vcoubard 1048:efb29faf12fc 620 * advertising payload is too small.
rgrover1 710:b2e1a2660ec2 621 *
vcoubard 1048:efb29faf12fc 622 * @param type The type describing the variable length data.
vcoubard 1048:efb29faf12fc 623 * @param data Data bytes.
vcoubard 1048:efb29faf12fc 624 * @param len Length of data.
vcoubard 1104:0244fbb0324e 625 *
vcoubard 1104:0244fbb0324e 626 * @return BLE_ERROR_NONE if the advertisement payload was updated based on
vcoubard 1104:0244fbb0324e 627 * matching AD type; otherwise, an appropriate error.
vcoubard 1104:0244fbb0324e 628 *
vcoubard 1104:0244fbb0324e 629 * @note When the specified AD type is INCOMPLETE_LIST_16BIT_SERVICE_IDS,
vcoubard 1104:0244fbb0324e 630 * COMPLETE_LIST_16BIT_SERVICE_IDS, INCOMPLETE_LIST_32BIT_SERVICE_IDS,
vcoubard 1104:0244fbb0324e 631 * COMPLETE_LIST_32BIT_SERVICE_IDS, INCOMPLETE_LIST_128BIT_SERVICE_IDS,
vcoubard 1104:0244fbb0324e 632 * COMPLETE_LIST_128BIT_SERVICE_IDS or LIST_128BIT_SOLICITATION_IDS the
vcoubard 1104:0244fbb0324e 633 * supplied value is appended to the values previously added to the
vcoubard 1104:0244fbb0324e 634 * payload.
rgrover1 710:b2e1a2660ec2 635 */
rgrover1 710:b2e1a2660ec2 636 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 637 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 710:b2e1a2660ec2 638 setDeviceName(data);
rgrover1 710:b2e1a2660ec2 639 }
rgrover1 710:b2e1a2660ec2 640
rgrover1 710:b2e1a2660ec2 641 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 642 if ((rc = _advPayload.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 643 return rc;
rgrover1 710:b2e1a2660ec2 644 }
rgrover1 710:b2e1a2660ec2 645
rgrover1 710:b2e1a2660ec2 646 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 647 }
rgrover1 710:b2e1a2660ec2 648
rgrover1 710:b2e1a2660ec2 649 /**
rgrover1 765:4cd91998cd48 650 * Update a particular ADV field in the advertising payload (based on
vcoubard 1104:0244fbb0324e 651 * matching type).
rgrover1 763:36c3e2b1f1ae 652 *
vcoubard 1048:efb29faf12fc 653 * @param[in] type The ADV type field describing the variable length data.
vcoubard 1048:efb29faf12fc 654 * @param[in] data Data bytes.
vcoubard 1048:efb29faf12fc 655 * @param[in] len Length of data.
rgrover1 765:4cd91998cd48 656 *
rgrover1 765:4cd91998cd48 657 * @note: If advertisements are enabled, then the update will take effect immediately.
rgrover1 765:4cd91998cd48 658 *
rgrover1 765:4cd91998cd48 659 * @return BLE_ERROR_NONE if the advertisement payload was updated based on
vcoubard 1104:0244fbb0324e 660 * matching AD type; otherwise, an appropriate error.
rgrover1 763:36c3e2b1f1ae 661 */
rgrover1 763:36c3e2b1f1ae 662 ble_error_t updateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 763:36c3e2b1f1ae 663 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 763:36c3e2b1f1ae 664 setDeviceName(data);
rgrover1 763:36c3e2b1f1ae 665 }
rgrover1 763:36c3e2b1f1ae 666
rgrover1 763:36c3e2b1f1ae 667 ble_error_t rc;
rgrover1 763:36c3e2b1f1ae 668 if ((rc = _advPayload.updateData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 763:36c3e2b1f1ae 669 return rc;
rgrover1 763:36c3e2b1f1ae 670 }
rgrover1 763:36c3e2b1f1ae 671
rgrover1 763:36c3e2b1f1ae 672 return setAdvertisingData();
rgrover1 763:36c3e2b1f1ae 673 }
rgrover1 763:36c3e2b1f1ae 674
rgrover1 763:36c3e2b1f1ae 675 /**
vcoubard 1048:efb29faf12fc 676 * Set up a particular, user-constructed advertisement payload for the
rgrover1 710:b2e1a2660ec2 677 * underlying stack. It would be uncommon for this API to be used directly;
rgrover1 710:b2e1a2660ec2 678 * there are other APIs to build an advertisement payload (see above).
rgrover1 710:b2e1a2660ec2 679 */
rgrover1 710:b2e1a2660ec2 680 ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
rgrover1 710:b2e1a2660ec2 681 _advPayload = payload;
rgrover1 710:b2e1a2660ec2 682 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 683 }
rgrover1 710:b2e1a2660ec2 684
rgrover1 710:b2e1a2660ec2 685 /**
rgrover1 710:b2e1a2660ec2 686 * @return Read back advertising data. Useful for storing and
rgrover1 710:b2e1a2660ec2 687 * restoring payload.
rgrover1 710:b2e1a2660ec2 688 */
rgrover1 710:b2e1a2660ec2 689 const GapAdvertisingData &getAdvertisingPayload(void) const {
rgrover1 710:b2e1a2660ec2 690 return _advPayload;
rgrover1 710:b2e1a2660ec2 691 }
rgrover1 710:b2e1a2660ec2 692
rgrover1 710:b2e1a2660ec2 693 /**
rgrover1 710:b2e1a2660ec2 694 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 695 * scanResponse payload.
rgrover1 710:b2e1a2660ec2 696 *
vcoubard 1048:efb29faf12fc 697 * @param[in] type The type describing the variable length data.
vcoubard 1048:efb29faf12fc 698 * @param[in] data Data bytes.
vcoubard 1048:efb29faf12fc 699 * @param[in] len Length of data.
rgrover1 710:b2e1a2660ec2 700 */
rgrover1 710:b2e1a2660ec2 701 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 702 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 703 if ((rc = _scanResponse.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 704 return rc;
rgrover1 710:b2e1a2660ec2 705 }
rgrover1 710:b2e1a2660ec2 706
rgrover1 710:b2e1a2660ec2 707 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 708 }
rgrover1 710:b2e1a2660ec2 709
rgrover1 710:b2e1a2660ec2 710 /**
rgrover1 710:b2e1a2660ec2 711 * Reset any scan response prepared from prior calls to
rgrover1 710:b2e1a2660ec2 712 * accumulateScanResponse().
rgrover1 710:b2e1a2660ec2 713 *
rgrover1 710:b2e1a2660ec2 714 * Note: This should be followed by a call to setAdvertisingPayload() or
rgrover1 710:b2e1a2660ec2 715 * startAdvertising() before the update takes effect.
rgrover1 710:b2e1a2660ec2 716 */
rgrover1 710:b2e1a2660ec2 717 void clearScanResponse(void) {
rgrover1 710:b2e1a2660ec2 718 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 719 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 720 }
rgrover1 710:b2e1a2660ec2 721
rgrover1 710:b2e1a2660ec2 722 /**
vcoubard 1048:efb29faf12fc 723 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 724 * @param[in] interval
rgrover1 710:b2e1a2660ec2 725 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 726 * @param[in] window
rgrover1 710:b2e1a2660ec2 727 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 728 * @param[in] timeout
vcoubard 1048:efb29faf12fc 729 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
rgrover1 710:b2e1a2660ec2 730 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 731 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 732 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 733 *
rgrover1 710:b2e1a2660ec2 734 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 735 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 736 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 737 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 738 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 739 * interval.
rgrover1 710:b2e1a2660ec2 740 *
rgrover1 710:b2e1a2660ec2 741 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 742 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 743 *
rgrover1 710:b2e1a2660ec2 744 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 710:b2e1a2660ec2 745 */
rgrover1 710:b2e1a2660ec2 746 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1 710:b2e1a2660ec2 747 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1 710:b2e1a2660ec2 748 uint16_t timeout = 0,
rgrover1 710:b2e1a2660ec2 749 bool activeScanning = false) {
rgrover1 710:b2e1a2660ec2 750 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 751 if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 752 ((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 753 ((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
rgrover1 710:b2e1a2660ec2 754 _scanningParams.setActiveScanning(activeScanning);
rgrover1 710:b2e1a2660ec2 755 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 756 }
rgrover1 710:b2e1a2660ec2 757
rgrover1 710:b2e1a2660ec2 758 return rc;
rgrover1 710:b2e1a2660ec2 759 }
rgrover1 710:b2e1a2660ec2 760
rgrover1 710:b2e1a2660ec2 761 /**
vcoubard 1048:efb29faf12fc 762 * Set up the scanInterval parameter for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 763 * @param[in] interval
rgrover1 710:b2e1a2660ec2 764 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 765 *
rgrover1 710:b2e1a2660ec2 766 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 767 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 768 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 769 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 770 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 771 * interval.
rgrover1 710:b2e1a2660ec2 772 *
rgrover1 710:b2e1a2660ec2 773 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 774 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 775 */
rgrover1 710:b2e1a2660ec2 776 ble_error_t setScanInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 777 return _scanningParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 778 }
rgrover1 710:b2e1a2660ec2 779
rgrover1 710:b2e1a2660ec2 780 /**
vcoubard 1048:efb29faf12fc 781 * Set up the scanWindow parameter for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 782 * @param[in] window
rgrover1 710:b2e1a2660ec2 783 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 784 *
rgrover1 710:b2e1a2660ec2 785 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 786 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 787 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 788 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 789 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 790 * interval.
rgrover1 710:b2e1a2660ec2 791 *
rgrover1 710:b2e1a2660ec2 792 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 793 * enabled by using startScan().
rgrover1 770:079b714e9c1a 794 *
rgrover1 770:079b714e9c1a 795 * If scanning is already active, the updated value of scanWindow will be
rgrover1 770:079b714e9c1a 796 * propagated to the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 797 */
rgrover1 710:b2e1a2660ec2 798 ble_error_t setScanWindow(uint16_t window) {
rgrover1 770:079b714e9c1a 799 ble_error_t rc;
rgrover1 770:079b714e9c1a 800 if ((rc = _scanningParams.setWindow(window)) != BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 801 return rc;
rgrover1 770:079b714e9c1a 802 }
rgrover1 770:079b714e9c1a 803
rgrover1 770:079b714e9c1a 804 /* If scanning is already active, propagate the new setting to the stack. */
rgrover1 770:079b714e9c1a 805 if (scanningActive) {
rgrover1 770:079b714e9c1a 806 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 807 }
rgrover1 770:079b714e9c1a 808
rgrover1 770:079b714e9c1a 809 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 810 }
rgrover1 710:b2e1a2660ec2 811
rgrover1 710:b2e1a2660ec2 812 /**
vcoubard 1048:efb29faf12fc 813 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 814 * @param[in] timeout
vcoubard 1048:efb29faf12fc 815 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
rgrover1 710:b2e1a2660ec2 816 *
rgrover1 710:b2e1a2660ec2 817 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 818 * enabled by using startScan().
rgrover1 770:079b714e9c1a 819 *
rgrover1 770:079b714e9c1a 820 * If scanning is already active, the updated value of scanTimeout will be
rgrover1 770:079b714e9c1a 821 * propagated to the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 822 */
rgrover1 710:b2e1a2660ec2 823 ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1 770:079b714e9c1a 824 ble_error_t rc;
rgrover1 770:079b714e9c1a 825 if ((rc = _scanningParams.setTimeout(timeout)) != BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 826 return rc;
rgrover1 770:079b714e9c1a 827 }
rgrover1 770:079b714e9c1a 828
rgrover1 770:079b714e9c1a 829 /* If scanning is already active, propagate the new settings to the stack. */
rgrover1 770:079b714e9c1a 830 if (scanningActive) {
rgrover1 770:079b714e9c1a 831 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 832 }
rgrover1 770:079b714e9c1a 833
rgrover1 770:079b714e9c1a 834 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 835 }
rgrover1 710:b2e1a2660ec2 836
rgrover1 710:b2e1a2660ec2 837 /**
vcoubard 1048:efb29faf12fc 838 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 839 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 840 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 841 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 842 *
rgrover1 710:b2e1a2660ec2 843 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 844 * enabled by using startScan().
rgrover1 770:079b714e9c1a 845 *
rgrover1 770:079b714e9c1a 846 * If scanning is already in progress, then active-scanning will be enabled
rgrover1 770:079b714e9c1a 847 * for the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 848 */
rgrover1 770:079b714e9c1a 849 ble_error_t setActiveScanning(bool activeScanning) {
rgrover1 710:b2e1a2660ec2 850 _scanningParams.setActiveScanning(activeScanning);
rgrover1 770:079b714e9c1a 851
rgrover1 770:079b714e9c1a 852 /* If scanning is already active, propagate the new settings to the stack. */
rgrover1 770:079b714e9c1a 853 if (scanningActive) {
rgrover1 770:079b714e9c1a 854 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 855 }
rgrover1 770:079b714e9c1a 856
rgrover1 770:079b714e9c1a 857 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 858 }
rgrover1 710:b2e1a2660ec2 859
rgrover1 710:b2e1a2660ec2 860 /**
rgrover1 710:b2e1a2660ec2 861 * Start scanning (Observer Procedure) based on the parameters currently in
rgrover1 710:b2e1a2660ec2 862 * effect.
rgrover1 710:b2e1a2660ec2 863 *
rgrover1 710:b2e1a2660ec2 864 * @param[in] callback
vcoubard 1048:efb29faf12fc 865 * The application-specific callback to be invoked upon
rgrover1 710:b2e1a2660ec2 866 * receiving every advertisement report. This can be passed in
rgrover1 710:b2e1a2660ec2 867 * as NULL, in which case scanning may not be enabled at all.
rgrover1 710:b2e1a2660ec2 868 */
rgrover1 710:b2e1a2660ec2 869 ble_error_t startScan(void (*callback)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 870 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 871 if (callback) {
rgrover1 710:b2e1a2660ec2 872 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 873 scanningActive = true;
rgrover1 710:b2e1a2660ec2 874 onAdvertisementReport.attach(callback);
rgrover1 710:b2e1a2660ec2 875 }
rgrover1 710:b2e1a2660ec2 876 }
rgrover1 710:b2e1a2660ec2 877
rgrover1 710:b2e1a2660ec2 878 return err;
rgrover1 710:b2e1a2660ec2 879 }
rgrover1 710:b2e1a2660ec2 880
rgrover1 710:b2e1a2660ec2 881 /**
rgrover1 710:b2e1a2660ec2 882 * Same as above, but this takes an (object, method) pair for a callback.
rgrover1 710:b2e1a2660ec2 883 */
rgrover1 710:b2e1a2660ec2 884 template<typename T>
rgrover1 710:b2e1a2660ec2 885 ble_error_t startScan(T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 886 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 887 if (object && callbackMember) {
rgrover1 710:b2e1a2660ec2 888 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 889 scanningActive = true;
rgrover1 710:b2e1a2660ec2 890 onAdvertisementReport.attach(object, callbackMember);
rgrover1 710:b2e1a2660ec2 891 }
rgrover1 710:b2e1a2660ec2 892 }
rgrover1 710:b2e1a2660ec2 893
rgrover1 710:b2e1a2660ec2 894 return err;
rgrover1 710:b2e1a2660ec2 895 }
rgrover1 710:b2e1a2660ec2 896
rgrover1 753:0f60274cd3ad 897 /**
rgrover1 753:0f60274cd3ad 898 * Initialize radio-notification events to be generated from the stack.
vcoubard 1048:efb29faf12fc 899 * This API doesn't need to be called directly.
rgrover1 753:0f60274cd3ad 900 *
rgrover1 753:0f60274cd3ad 901 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 753:0f60274cd3ad 902 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 903 * radio is in use.
rgrover1 753:0f60274cd3ad 904 *
vcoubard 1048:efb29faf12fc 905 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard 1048:efb29faf12fc 906 * signal is sent at the end of the radio event. These signals can be used
rgrover1 753:0f60274cd3ad 907 * by the application programmer to synchronize application logic with radio
rgrover1 753:0f60274cd3ad 908 * activity. For example, the ACTIVE signal can be used to shut off external
vcoubard 1048:efb29faf12fc 909 * devices, to manage peak current drawn during periods when the radio is on,
rgrover1 753:0f60274cd3ad 910 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 753:0f60274cd3ad 911 *
rgrover1 753:0f60274cd3ad 912 * @return BLE_ERROR_NONE on successful initialization, otherwise an error code.
rgrover1 753:0f60274cd3ad 913 */
rgrover1 753:0f60274cd3ad 914 virtual ble_error_t initRadioNotification(void) {
rgrover1 753:0f60274cd3ad 915 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 753:0f60274cd3ad 916 }
rgrover1 753:0f60274cd3ad 917
rgrover1 710:b2e1a2660ec2 918 private:
rgrover1 710:b2e1a2660ec2 919 ble_error_t setAdvertisingData(void) {
rgrover1 710:b2e1a2660ec2 920 return setAdvertisingData(_advPayload, _scanResponse);
rgrover1 710:b2e1a2660ec2 921 }
rgrover1 710:b2e1a2660ec2 922
rgrover1 710:b2e1a2660ec2 923 private:
rgrover1 896:791741895cd8 924 virtual ble_error_t setAdvertisingData(const GapAdvertisingData &advData, const GapAdvertisingData &scanResponse) = 0;
rgrover1 896:791741895cd8 925 virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
rgrover1 710:b2e1a2660ec2 926
rgrover1 710:b2e1a2660ec2 927 public:
rgrover1 710:b2e1a2660ec2 928 /**
rgrover1 710:b2e1a2660ec2 929 * Accessors to read back currently active advertising params.
rgrover1 710:b2e1a2660ec2 930 */
rgrover1 710:b2e1a2660ec2 931 GapAdvertisingParams &getAdvertisingParams(void) {
rgrover1 710:b2e1a2660ec2 932 return _advParams;
rgrover1 710:b2e1a2660ec2 933 }
rgrover1 710:b2e1a2660ec2 934 const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1 710:b2e1a2660ec2 935 return _advParams;
rgrover1 710:b2e1a2660ec2 936 }
rgrover1 710:b2e1a2660ec2 937
rgrover1 710:b2e1a2660ec2 938 /**
vcoubard 1048:efb29faf12fc 939 * Set up a particular, user-constructed set of advertisement parameters for
rgrover1 710:b2e1a2660ec2 940 * the underlying stack. It would be uncommon for this API to be used
rgrover1 710:b2e1a2660ec2 941 * directly; there are other APIs to tweak advertisement parameters
rgrover1 710:b2e1a2660ec2 942 * individually.
rgrover1 710:b2e1a2660ec2 943 */
rgrover1 710:b2e1a2660ec2 944 void setAdvertisingParams(const GapAdvertisingParams &newParams) {
rgrover1 710:b2e1a2660ec2 945 _advParams = newParams;
rgrover1 710:b2e1a2660ec2 946 }
rgrover1 710:b2e1a2660ec2 947
rgrover1 710:b2e1a2660ec2 948 /* Event callback handlers. */
rgrover1 710:b2e1a2660ec2 949 public:
rgrover1 710:b2e1a2660ec2 950 /**
vcoubard 1048:efb29faf12fc 951 * Set up a callback for timeout events. Refer to TimeoutSource_t for
rgrover1 710:b2e1a2660ec2 952 * possible event types.
vcoubard 1052:b55e1ad3e1b3 953 * @note It is possible to unregister callbacks using onTimeout().detach(callback)
rgrover1 710:b2e1a2660ec2 954 */
vcoubard 1052:b55e1ad3e1b3 955 void onTimeout(TimeoutEventCallback_t callback) {
vcoubard 1052:b55e1ad3e1b3 956 timeoutCallbackChain.add(callback);
vcoubard 1052:b55e1ad3e1b3 957 }
vcoubard 1052:b55e1ad3e1b3 958
vcoubard 1052:b55e1ad3e1b3 959 /**
vcoubard 1052:b55e1ad3e1b3 960 * @brief provide access to the callchain of timeout event callbacks
vcoubard 1052:b55e1ad3e1b3 961 * It is possible to register callbacks using onTimeout().add(callback);
vcoubard 1054:f59e5d9a992a 962 * It is possible to unregister callbacks using onTimeout().detach(callback)
vcoubard 1052:b55e1ad3e1b3 963 * @return The timeout event callbacks chain
vcoubard 1052:b55e1ad3e1b3 964 */
vcoubard 1052:b55e1ad3e1b3 965 TimeoutEventCallbackChain_t& onTimeout() {
vcoubard 1052:b55e1ad3e1b3 966 return timeoutCallbackChain;
vcoubard 1052:b55e1ad3e1b3 967 }
rgrover1 710:b2e1a2660ec2 968
rgrover1 710:b2e1a2660ec2 969 /**
rgrover1 829:9072de50087b 970 * Append to a chain of callbacks to be invoked upon GAP connection.
vcoubard 1052:b55e1ad3e1b3 971 * @note It is possible to unregister callbacks using onConnection().detach(callback)
rgrover1 710:b2e1a2660ec2 972 */
rgrover1 829:9072de50087b 973 void onConnection(ConnectionEventCallback_t callback) {connectionCallChain.add(callback);}
rgrover1 710:b2e1a2660ec2 974
rgrover1 829:9072de50087b 975 template<typename T>
rgrover1 829:9072de50087b 976 void onConnection(T *tptr, void (T::*mptr)(const ConnectionCallbackParams_t*)) {connectionCallChain.add(tptr, mptr);}
rgrover1 710:b2e1a2660ec2 977
rgrover1 710:b2e1a2660ec2 978 /**
vcoubard 1052:b55e1ad3e1b3 979 * @brief provide access to the callchain of connection event callbacks
vcoubard 1052:b55e1ad3e1b3 980 * It is possible to register callbacks using onConnection().add(callback);
vcoubard 1054:f59e5d9a992a 981 * It is possible to unregister callbacks using onConnection().detach(callback)
vcoubard 1052:b55e1ad3e1b3 982 * @return The connection event callbacks chain
vcoubard 1052:b55e1ad3e1b3 983 */
vcoubard 1054:f59e5d9a992a 984 ConnectionEventCallbackChain_t& onConnection() {
vcoubard 1052:b55e1ad3e1b3 985 return connectionCallChain;
vcoubard 1052:b55e1ad3e1b3 986 }
vcoubard 1052:b55e1ad3e1b3 987
vcoubard 1052:b55e1ad3e1b3 988 /**
rgrover1 829:9072de50087b 989 * Append to a chain of callbacks to be invoked upon GAP disconnection.
vcoubard 1052:b55e1ad3e1b3 990 * @note It is possible to unregister callbacks using onDisconnection().detach(callback)
rgrover1 816:2b4f0ef8c06e 991 */
rgrover1 829:9072de50087b 992 void onDisconnection(DisconnectionEventCallback_t callback) {disconnectionCallChain.add(callback);}
rgrover1 816:2b4f0ef8c06e 993
rgrover1 710:b2e1a2660ec2 994 template<typename T>
rgrover1 829:9072de50087b 995 void onDisconnection(T *tptr, void (T::*mptr)(const DisconnectionCallbackParams_t*)) {disconnectionCallChain.add(tptr, mptr);}
rgrover1 710:b2e1a2660ec2 996
rgrover1 710:b2e1a2660ec2 997 /**
vcoubard 1052:b55e1ad3e1b3 998 * @brief provide access to the callchain of disconnection event callbacks
vcoubard 1052:b55e1ad3e1b3 999 * It is possible to register callbacks using onDisconnection().add(callback);
vcoubard 1054:f59e5d9a992a 1000 * It is possible to unregister callbacks using onDisconnection().detach(callback)
vcoubard 1052:b55e1ad3e1b3 1001 * @return The disconnection event callbacks chain
vcoubard 1052:b55e1ad3e1b3 1002 */
vcoubard 1052:b55e1ad3e1b3 1003 DisconnectionEventCallbackChain_t& onDisconnection() {
vcoubard 1052:b55e1ad3e1b3 1004 return disconnectionCallChain;
vcoubard 1052:b55e1ad3e1b3 1005 }
vcoubard 1052:b55e1ad3e1b3 1006
vcoubard 1052:b55e1ad3e1b3 1007 /**
rgrover1 710:b2e1a2660ec2 1008 * Set the application callback for radio-notification events.
rgrover1 710:b2e1a2660ec2 1009 *
rgrover1 710:b2e1a2660ec2 1010 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 710:b2e1a2660ec2 1011 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 1012 * radio is in use.
rgrover1 710:b2e1a2660ec2 1013 *
vcoubard 1048:efb29faf12fc 1014 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard 1048:efb29faf12fc 1015 * signal is sent at the end of the radio event. These signals can be used
rgrover1 710:b2e1a2660ec2 1016 * by the application programmer to synchronize application logic with radio
rgrover1 710:b2e1a2660ec2 1017 * activity. For example, the ACTIVE signal can be used to shut off external
vcoubard 1048:efb29faf12fc 1018 * devices, to manage peak current drawn during periods when the radio is on,
rgrover1 710:b2e1a2660ec2 1019 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 710:b2e1a2660ec2 1020 *
rgrover1 710:b2e1a2660ec2 1021 * @param callback
rgrover1 710:b2e1a2660ec2 1022 * The application handler to be invoked in response to a radio
rgrover1 710:b2e1a2660ec2 1023 * ACTIVE/INACTIVE event.
rgrover1 754:9b391fb5c5d7 1024 *
vcoubard 1048:efb29faf12fc 1025 * Or in the other version:
rgrover1 754:9b391fb5c5d7 1026 *
rgrover1 754:9b391fb5c5d7 1027 * @param tptr
rgrover1 754:9b391fb5c5d7 1028 * Pointer to the object of a class defining the member callback
rgrover1 754:9b391fb5c5d7 1029 * function (mptr).
rgrover1 754:9b391fb5c5d7 1030 * @param mptr
rgrover1 754:9b391fb5c5d7 1031 * The member callback (within the context of an object) to be
rgrover1 754:9b391fb5c5d7 1032 * invoked in response to a radio ACTIVE/INACTIVE event.
rgrover1 710:b2e1a2660ec2 1033 */
rgrover1 753:0f60274cd3ad 1034 void onRadioNotification(void (*callback)(bool param)) {
rgrover1 753:0f60274cd3ad 1035 radioNotificationCallback.attach(callback);
rgrover1 753:0f60274cd3ad 1036 }
rgrover1 753:0f60274cd3ad 1037 template <typename T>
rgrover1 753:0f60274cd3ad 1038 void onRadioNotification(T *tptr, void (T::*mptr)(bool)) {
rgrover1 753:0f60274cd3ad 1039 radioNotificationCallback.attach(tptr, mptr);
rgrover1 753:0f60274cd3ad 1040 }
rgrover1 710:b2e1a2660ec2 1041
vcoubard 1090:148d8b9b56a5 1042 /**
vcoubard 1090:148d8b9b56a5 1043 * Setup a callback to be invoked to notify the user application that the
vcoubard 1090:148d8b9b56a5 1044 * Gap instance is about to shutdown (possibly as a result of a call
vcoubard 1090:148d8b9b56a5 1045 * to BLE::shutdown()).
vcoubard 1090:148d8b9b56a5 1046 *
vcoubard 1090:148d8b9b56a5 1047 * @Note: It is possible to chain together multiple onShutdown callbacks
vcoubard 1090:148d8b9b56a5 1048 * (potentially from different modules of an application) to be notified
vcoubard 1090:148d8b9b56a5 1049 * before the Gap instance is shutdown.
vcoubard 1090:148d8b9b56a5 1050 *
vcoubard 1090:148d8b9b56a5 1051 * @Note: It is also possible to set up a callback into a member function of
vcoubard 1090:148d8b9b56a5 1052 * some object.
vcoubard 1090:148d8b9b56a5 1053 *
vcoubard 1090:148d8b9b56a5 1054 * @Note It is possible to unregister a callback using onShutdown().detach(callback)
vcoubard 1090:148d8b9b56a5 1055 */
vcoubard 1090:148d8b9b56a5 1056 void onShutdown(const GapShutdownCallback_t& callback) {
vcoubard 1090:148d8b9b56a5 1057 shutdownCallChain.add(callback);
vcoubard 1090:148d8b9b56a5 1058 }
vcoubard 1090:148d8b9b56a5 1059 template <typename T>
vcoubard 1090:148d8b9b56a5 1060 void onShutdown(T *objPtr, void (T::*memberPtr)(void)) {
vcoubard 1090:148d8b9b56a5 1061 shutdownCallChain.add(objPtr, memberPtr);
vcoubard 1090:148d8b9b56a5 1062 }
vcoubard 1090:148d8b9b56a5 1063
vcoubard 1090:148d8b9b56a5 1064 /**
vcoubard 1090:148d8b9b56a5 1065 * @brief provide access to the callchain of shutdown event callbacks
vcoubard 1090:148d8b9b56a5 1066 * It is possible to register callbacks using onShutdown().add(callback);
vcoubard 1090:148d8b9b56a5 1067 * It is possible to unregister callbacks using onShutdown().detach(callback)
vcoubard 1090:148d8b9b56a5 1068 * @return The shutdown event callbacks chain
vcoubard 1090:148d8b9b56a5 1069 */
vcoubard 1090:148d8b9b56a5 1070 GapShutdownCallbackChain_t& onShutdown() {
vcoubard 1090:148d8b9b56a5 1071 return shutdownCallChain;
vcoubard 1090:148d8b9b56a5 1072 }
vcoubard 1090:148d8b9b56a5 1073
vcoubard 1082:127667021827 1074 public:
vcoubard 1082:127667021827 1075 /**
vcoubard 1090:148d8b9b56a5 1076 * Notify all registered onShutdown callbacks that the Gap instance is
vcoubard 1090:148d8b9b56a5 1077 * about to be shutdown and clear all Gap state of the
vcoubard 1090:148d8b9b56a5 1078 * associated object.
vcoubard 1082:127667021827 1079 *
vcoubard 1082:127667021827 1080 * This function is meant to be overridden in the platform-specific
vcoubard 1082:127667021827 1081 * sub-class. Nevertheless, the sub-class is only expected to reset its
vcoubard 1082:127667021827 1082 * state and not the data held in Gap members. This shall be achieved by a
vcoubard 1082:127667021827 1083 * call to Gap::reset() from the sub-class' reset() implementation.
vcoubard 1082:127667021827 1084 *
vcoubard 1082:127667021827 1085 * @return BLE_ERROR_NONE on success.
vcoubard 1082:127667021827 1086 *
vcoubard 1082:127667021827 1087 * @note: Currently a call to reset() does not reset the advertising and
vcoubard 1082:127667021827 1088 * scan parameters to default values.
vcoubard 1082:127667021827 1089 */
vcoubard 1082:127667021827 1090 virtual ble_error_t reset(void) {
vcoubard 1090:148d8b9b56a5 1091 /* Notify that the instance is about to shutdown */
vcoubard 1090:148d8b9b56a5 1092 shutdownCallChain.call(this);
vcoubard 1090:148d8b9b56a5 1093 shutdownCallChain.clear();
vcoubard 1090:148d8b9b56a5 1094
vcoubard 1082:127667021827 1095 /* Clear Gap state */
vcoubard 1082:127667021827 1096 state.advertising = 0;
vcoubard 1084:40c1e518d6de 1097 state.connected = 0;
vcoubard 1082:127667021827 1098
vcoubard 1082:127667021827 1099 /* Clear scanning state */
vcoubard 1082:127667021827 1100 scanningActive = false;
vcoubard 1082:127667021827 1101
vcoubard 1082:127667021827 1102 /* Clear advertising and scanning data */
vcoubard 1082:127667021827 1103 _advPayload.clear();
vcoubard 1082:127667021827 1104 _scanResponse.clear();
vcoubard 1082:127667021827 1105
vcoubard 1082:127667021827 1106 /* Clear callbacks */
vcoubard 1082:127667021827 1107 timeoutCallbackChain.clear();
vcoubard 1082:127667021827 1108 connectionCallChain.clear();
vcoubard 1082:127667021827 1109 disconnectionCallChain.clear();
vcoubard 1082:127667021827 1110 radioNotificationCallback = NULL;
vcoubard 1084:40c1e518d6de 1111 onAdvertisementReport = NULL;
vcoubard 1082:127667021827 1112
vcoubard 1082:127667021827 1113 return BLE_ERROR_NONE;
vcoubard 1082:127667021827 1114 }
vcoubard 1082:127667021827 1115
rgrover1 710:b2e1a2660ec2 1116 protected:
rgrover1 710:b2e1a2660ec2 1117 Gap() :
rgrover1 710:b2e1a2660ec2 1118 _advParams(),
rgrover1 710:b2e1a2660ec2 1119 _advPayload(),
rgrover1 710:b2e1a2660ec2 1120 _scanningParams(),
rgrover1 710:b2e1a2660ec2 1121 _scanResponse(),
rgrover1 710:b2e1a2660ec2 1122 state(),
rgrover1 770:079b714e9c1a 1123 scanningActive(false),
vcoubard 1052:b55e1ad3e1b3 1124 timeoutCallbackChain(),
rgrover1 710:b2e1a2660ec2 1125 radioNotificationCallback(),
rgrover1 710:b2e1a2660ec2 1126 onAdvertisementReport(),
rgrover1 816:2b4f0ef8c06e 1127 connectionCallChain(),
rgrover1 710:b2e1a2660ec2 1128 disconnectionCallChain() {
rgrover1 710:b2e1a2660ec2 1129 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 1130 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 1131 }
rgrover1 710:b2e1a2660ec2 1132
rgrover1 710:b2e1a2660ec2 1133 /* Entry points for the underlying stack to report events back to the user. */
rgrover1 710:b2e1a2660ec2 1134 public:
vcoubard 1079:6e2d9514f3df 1135 void processConnectionEvent(Handle_t handle,
vcoubard 1079:6e2d9514f3df 1136 Role_t role,
vcoubard 1079:6e2d9514f3df 1137 BLEProtocol::AddressType_t peerAddrType,
vcoubard 1079:6e2d9514f3df 1138 const BLEProtocol::Address_t peerAddr,
vcoubard 1079:6e2d9514f3df 1139 BLEProtocol::AddressType_t ownAddrType,
vcoubard 1079:6e2d9514f3df 1140 const BLEProtocol::Address_t ownAddr,
vcoubard 1079:6e2d9514f3df 1141 const ConnectionParams_t *connectionParams) {
rgrover1 710:b2e1a2660ec2 1142 state.connected = 1;
rgrover1 829:9072de50087b 1143 ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
rgrover1 829:9072de50087b 1144 connectionCallChain.call(&callbackParams);
rgrover1 710:b2e1a2660ec2 1145 }
rgrover1 710:b2e1a2660ec2 1146
rgrover1 710:b2e1a2660ec2 1147 void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
rgrover1 710:b2e1a2660ec2 1148 state.connected = 0;
rgrover1 829:9072de50087b 1149 DisconnectionCallbackParams_t callbackParams(handle, reason);
rgrover1 829:9072de50087b 1150 disconnectionCallChain.call(&callbackParams);
rgrover1 710:b2e1a2660ec2 1151 }
rgrover1 710:b2e1a2660ec2 1152
vcoubard 1079:6e2d9514f3df 1153 void processAdvertisementReport(const BLEProtocol::Address_t peerAddr,
vcoubard 1079:6e2d9514f3df 1154 int8_t rssi,
vcoubard 1079:6e2d9514f3df 1155 bool isScanResponse,
rgrover1 710:b2e1a2660ec2 1156 GapAdvertisingParams::AdvertisingType_t type,
vcoubard 1079:6e2d9514f3df 1157 uint8_t advertisingDataLen,
vcoubard 1079:6e2d9514f3df 1158 const uint8_t *advertisingData) {
rgrover1 710:b2e1a2660ec2 1159 AdvertisementCallbackParams_t params;
rgrover1 710:b2e1a2660ec2 1160 memcpy(params.peerAddr, peerAddr, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 1161 params.rssi = rssi;
rgrover1 710:b2e1a2660ec2 1162 params.isScanResponse = isScanResponse;
rgrover1 710:b2e1a2660ec2 1163 params.type = type;
rgrover1 710:b2e1a2660ec2 1164 params.advertisingDataLen = advertisingDataLen;
rgrover1 710:b2e1a2660ec2 1165 params.advertisingData = advertisingData;
rgrover1 710:b2e1a2660ec2 1166 onAdvertisementReport.call(&params);
rgrover1 710:b2e1a2660ec2 1167 }
rgrover1 710:b2e1a2660ec2 1168
rgrover1 710:b2e1a2660ec2 1169 void processTimeoutEvent(TimeoutSource_t source) {
vcoubard 1052:b55e1ad3e1b3 1170 if (timeoutCallbackChain) {
vcoubard 1052:b55e1ad3e1b3 1171 timeoutCallbackChain(source);
rgrover1 710:b2e1a2660ec2 1172 }
rgrover1 710:b2e1a2660ec2 1173 }
rgrover1 710:b2e1a2660ec2 1174
rgrover1 710:b2e1a2660ec2 1175 protected:
rgrover1 710:b2e1a2660ec2 1176 GapAdvertisingParams _advParams;
rgrover1 710:b2e1a2660ec2 1177 GapAdvertisingData _advPayload;
rgrover1 710:b2e1a2660ec2 1178 GapScanningParams _scanningParams;
rgrover1 710:b2e1a2660ec2 1179 GapAdvertisingData _scanResponse;
rgrover1 710:b2e1a2660ec2 1180
rgrover1 710:b2e1a2660ec2 1181 GapState_t state;
rgrover1 770:079b714e9c1a 1182 bool scanningActive;
rgrover1 710:b2e1a2660ec2 1183
rgrover1 710:b2e1a2660ec2 1184 protected:
vcoubard 1052:b55e1ad3e1b3 1185 TimeoutEventCallbackChain_t timeoutCallbackChain;
vcoubard 1052:b55e1ad3e1b3 1186 RadioNotificationEventCallback_t radioNotificationCallback;
vcoubard 1052:b55e1ad3e1b3 1187 AdvertisementReportCallback_t onAdvertisementReport;
vcoubard 1052:b55e1ad3e1b3 1188 ConnectionEventCallbackChain_t connectionCallChain;
vcoubard 1052:b55e1ad3e1b3 1189 DisconnectionEventCallbackChain_t disconnectionCallChain;
rgrover1 710:b2e1a2660ec2 1190
rgrover1 710:b2e1a2660ec2 1191 private:
vcoubard 1090:148d8b9b56a5 1192 GapShutdownCallbackChain_t shutdownCallChain;
vcoubard 1090:148d8b9b56a5 1193
vcoubard 1090:148d8b9b56a5 1194 private:
vcoubard 1048:efb29faf12fc 1195 /* Disallow copy and assignment. */
rgrover1 710:b2e1a2660ec2 1196 Gap(const Gap &);
rgrover1 710:b2e1a2660ec2 1197 Gap& operator=(const Gap &);
rgrover1 710:b2e1a2660ec2 1198 };
rgrover1 710:b2e1a2660ec2 1199
rgrover1 710:b2e1a2660ec2 1200 #endif // ifndef __GAP_H__