Andrew Fox / BLE_API

add "LE Device Address" 0x1B to advertising data types

Fork of BLE_API by Bluetooth Low Energy

ble/Gap.h@1034:947f5cf8884f, 2015-12-10 (annotated)

Committer:
rgrover1
Date:
Thu Dec 10 09:15:04 2015 +0000
Revision:
1034:947f5cf8884f
Parent:
1031:e13fdc3dad07
Child:
1035:d8ba3cb5a39a
Synchronized with git rev ce4551ba

Author: Rohit Grover

remove an incorrect comment block

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 710:b2e1a2660ec2 1 /* mbed Microcontroller Library
rgrover1 710:b2e1a2660ec2 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 710:b2e1a2660ec2 3 *
rgrover1 710:b2e1a2660ec2 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 710:b2e1a2660ec2 5 * you may not use this file except in compliance with the License.
rgrover1 710:b2e1a2660ec2 6 * You may obtain a copy of the License at
rgrover1 710:b2e1a2660ec2 7 *
rgrover1 710:b2e1a2660ec2 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 710:b2e1a2660ec2 9 *
rgrover1 710:b2e1a2660ec2 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 710:b2e1a2660ec2 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 710:b2e1a2660ec2 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 710:b2e1a2660ec2 13 * See the License for the specific language governing permissions and
rgrover1 710:b2e1a2660ec2 14 * limitations under the License.
rgrover1 710:b2e1a2660ec2 15 */
rgrover1 710:b2e1a2660ec2 16
rgrover1 710:b2e1a2660ec2 17 #ifndef __GAP_H__
rgrover1 710:b2e1a2660ec2 18 #define __GAP_H__
rgrover1 710:b2e1a2660ec2 19
rgrover1 710:b2e1a2660ec2 20 #include "GapAdvertisingData.h"
rgrover1 710:b2e1a2660ec2 21 #include "GapAdvertisingParams.h"
rgrover1 710:b2e1a2660ec2 22 #include "GapScanningParams.h"
rgrover1 710:b2e1a2660ec2 23 #include "GapEvents.h"
rgrover1 829:9072de50087b 24 #include "CallChainOfFunctionPointersWithContext.h"
rgrover1 710:b2e1a2660ec2 25 #include "FunctionPointerWithContext.h"
rgrover1 710:b2e1a2660ec2 26
rgrover1 993:4d62b7967c11 27 /* Forward declarations for classes that will only be used for pointers or references in the following. */
rgrover1 710:b2e1a2660ec2 28 class GapAdvertisingParams;
rgrover1 710:b2e1a2660ec2 29 class GapScanningParams;
rgrover1 710:b2e1a2660ec2 30 class GapAdvertisingData;
rgrover1 710:b2e1a2660ec2 31
rgrover1 710:b2e1a2660ec2 32 class Gap {
rgrover1 710:b2e1a2660ec2 33 public:
rgrover1 710:b2e1a2660ec2 34 enum AddressType_t {
rgrover1 710:b2e1a2660ec2 35 ADDR_TYPE_PUBLIC = 0,
rgrover1 710:b2e1a2660ec2 36 ADDR_TYPE_RANDOM_STATIC,
rgrover1 710:b2e1a2660ec2 37 ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE,
rgrover1 710:b2e1a2660ec2 38 ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE
rgrover1 710:b2e1a2660ec2 39 };
rgrover1 993:4d62b7967c11 40 typedef enum AddressType_t addr_type_t; /* @Note: Deprecated. Use AddressType_t instead. */
rgrover1 710:b2e1a2660ec2 41
rgrover1 710:b2e1a2660ec2 42 static const unsigned ADDR_LEN = 6;
rgrover1 710:b2e1a2660ec2 43 typedef uint8_t Address_t[ADDR_LEN]; /* 48-bit address, LSB format. */
rgrover1 993:4d62b7967c11 44 typedef Address_t address_t; /* @Note: Deprecated. Use Address_t instead. */
rgrover1 710:b2e1a2660ec2 45
rgrover1 710:b2e1a2660ec2 46 enum TimeoutSource_t {
rgrover1 710:b2e1a2660ec2 47 TIMEOUT_SRC_ADVERTISING = 0x00, /**< Advertising timeout. */
rgrover1 710:b2e1a2660ec2 48 TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /**< Security request timeout. */
rgrover1 710:b2e1a2660ec2 49 TIMEOUT_SRC_SCAN = 0x02, /**< Scanning timeout. */
rgrover1 710:b2e1a2660ec2 50 TIMEOUT_SRC_CONN = 0x03, /**< Connection timeout. */
rgrover1 710:b2e1a2660ec2 51 };
rgrover1 710:b2e1a2660ec2 52
rgrover1 710:b2e1a2660ec2 53 /**
rgrover1 710:b2e1a2660ec2 54 * Enumeration for disconnection reasons. The values for these reasons are
rgrover1 993:4d62b7967c11 55 * derived from Nordic's implementation, but the reasons are meant to be
rgrover1 993:4d62b7967c11 56 * independent of the transport. If you are returned a reason that is not
rgrover1 993:4d62b7967c11 57 * covered by this enumeration, please refer to the underlying
rgrover1 710:b2e1a2660ec2 58 * transport library.
rgrover1 710:b2e1a2660ec2 59 */
rgrover1 710:b2e1a2660ec2 60 enum DisconnectionReason_t {
rgrover1 710:b2e1a2660ec2 61 CONNECTION_TIMEOUT = 0x08,
rgrover1 710:b2e1a2660ec2 62 REMOTE_USER_TERMINATED_CONNECTION = 0x13,
rgrover1 993:4d62b7967c11 63 REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /**< Remote device terminated connection due to low resources.*/
rgrover1 993:4d62b7967c11 64 REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /**< Remote device terminated connection due to power off. */
rgrover1 710:b2e1a2660ec2 65 LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
rgrover1 710:b2e1a2660ec2 66 CONN_INTERVAL_UNACCEPTABLE = 0x3B,
rgrover1 710:b2e1a2660ec2 67 };
rgrover1 710:b2e1a2660ec2 68
rgrover1 993:4d62b7967c11 69 /* Describes the current state of the device (more than one bit can be set). */
rgrover1 710:b2e1a2660ec2 70 struct GapState_t {
rgrover1 993:4d62b7967c11 71 unsigned advertising : 1; /**< Peripheral is currently advertising. */
rgrover1 993:4d62b7967c11 72 unsigned connected : 1; /**< Peripheral is connected to a central. */
rgrover1 710:b2e1a2660ec2 73 };
rgrover1 710:b2e1a2660ec2 74
rgrover1 710:b2e1a2660ec2 75 typedef uint16_t Handle_t; /* Type for connection handle. */
rgrover1 710:b2e1a2660ec2 76
rgrover1 710:b2e1a2660ec2 77 typedef struct {
rgrover1 710:b2e1a2660ec2 78 uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 79 uint16_t maxConnectionInterval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 80 uint16_t slaveLatency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 81 uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 82 } ConnectionParams_t;
rgrover1 710:b2e1a2660ec2 83
rgrover1 710:b2e1a2660ec2 84 enum Role_t {
rgrover1 710:b2e1a2660ec2 85 PERIPHERAL = 0x1, /**< Peripheral Role. */
rgrover1 710:b2e1a2660ec2 86 CENTRAL = 0x2, /**< Central Role. */
rgrover1 710:b2e1a2660ec2 87 };
rgrover1 710:b2e1a2660ec2 88
rgrover1 710:b2e1a2660ec2 89 struct AdvertisementCallbackParams_t {
rgrover1 710:b2e1a2660ec2 90 Address_t peerAddr;
rgrover1 710:b2e1a2660ec2 91 int8_t rssi;
rgrover1 710:b2e1a2660ec2 92 bool isScanResponse;
rgrover1 710:b2e1a2660ec2 93 GapAdvertisingParams::AdvertisingType_t type;
rgrover1 710:b2e1a2660ec2 94 uint8_t advertisingDataLen;
rgrover1 710:b2e1a2660ec2 95 const uint8_t *advertisingData;
rgrover1 710:b2e1a2660ec2 96 };
rgrover1 710:b2e1a2660ec2 97 typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
rgrover1 710:b2e1a2660ec2 98
rgrover1 710:b2e1a2660ec2 99 struct ConnectionCallbackParams_t {
rgrover1 710:b2e1a2660ec2 100 Handle_t handle;
rgrover1 710:b2e1a2660ec2 101 Role_t role;
rgrover1 710:b2e1a2660ec2 102 AddressType_t peerAddrType;
rgrover1 710:b2e1a2660ec2 103 Address_t peerAddr;
rgrover1 710:b2e1a2660ec2 104 AddressType_t ownAddrType;
rgrover1 710:b2e1a2660ec2 105 Address_t ownAddr;
rgrover1 710:b2e1a2660ec2 106 const ConnectionParams_t *connectionParams;
rgrover1 710:b2e1a2660ec2 107
rgrover1 710:b2e1a2660ec2 108 ConnectionCallbackParams_t(Handle_t handleIn,
rgrover1 710:b2e1a2660ec2 109 Role_t roleIn,
rgrover1 710:b2e1a2660ec2 110 AddressType_t peerAddrTypeIn,
rgrover1 710:b2e1a2660ec2 111 const uint8_t *peerAddrIn,
rgrover1 710:b2e1a2660ec2 112 AddressType_t ownAddrTypeIn,
rgrover1 710:b2e1a2660ec2 113 const uint8_t *ownAddrIn,
rgrover1 710:b2e1a2660ec2 114 const ConnectionParams_t *connectionParamsIn) :
rgrover1 710:b2e1a2660ec2 115 handle(handleIn),
rgrover1 710:b2e1a2660ec2 116 role(roleIn),
rgrover1 710:b2e1a2660ec2 117 peerAddrType(peerAddrTypeIn),
rgrover1 710:b2e1a2660ec2 118 peerAddr(),
rgrover1 710:b2e1a2660ec2 119 ownAddrType(ownAddrTypeIn),
rgrover1 710:b2e1a2660ec2 120 ownAddr(),
rgrover1 710:b2e1a2660ec2 121 connectionParams(connectionParamsIn) {
rgrover1 710:b2e1a2660ec2 122 memcpy(peerAddr, peerAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 123 memcpy(ownAddr, ownAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 124 }
rgrover1 710:b2e1a2660ec2 125 };
rgrover1 710:b2e1a2660ec2 126
rgrover1 829:9072de50087b 127 struct DisconnectionCallbackParams_t {
rgrover1 829:9072de50087b 128 Handle_t handle;
rgrover1 829:9072de50087b 129 DisconnectionReason_t reason;
rgrover1 829:9072de50087b 130
rgrover1 829:9072de50087b 131 DisconnectionCallbackParams_t(Handle_t handleIn,
rgrover1 829:9072de50087b 132 DisconnectionReason_t reasonIn) :
rgrover1 829:9072de50087b 133 handle(handleIn),
rgrover1 829:9072de50087b 134 reason(reasonIn)
rgrover1 829:9072de50087b 135 {}
rgrover1 829:9072de50087b 136 };
rgrover1 829:9072de50087b 137
rgrover1 710:b2e1a2660ec2 138 static const uint16_t UNIT_1_25_MS = 1250; /**< Number of microseconds in 1.25 milliseconds. */
rgrover1 710:b2e1a2660ec2 139 static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
rgrover1 710:b2e1a2660ec2 140 return (durationInMillis * 1000) / UNIT_1_25_MS;
rgrover1 710:b2e1a2660ec2 141 }
rgrover1 766:03f1a26f132f 142
rgrover1 993:4d62b7967c11 143 typedef FunctionPointerWithContext<TimeoutSource_t> TimeoutEventCallback_t;
rgrover1 993:4d62b7967c11 144 typedef CallChainOfFunctionPointersWithContext<TimeoutSource_t> TimeoutEventCallbackChain_t;
rgrover1 710:b2e1a2660ec2 145
rgrover1 993:4d62b7967c11 146 typedef FunctionPointerWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallback_t;
rgrover1 993:4d62b7967c11 147 typedef CallChainOfFunctionPointersWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallbackChain_t;
rgrover1 993:4d62b7967c11 148
rgrover1 993:4d62b7967c11 149 typedef FunctionPointerWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallback_t;
rgrover1 1029:a5d0fec3b17c 150 typedef CallChainOfFunctionPointersWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallbackChain_t;
rgrover1 993:4d62b7967c11 151
rgrover1 753:0f60274cd3ad 152 typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
rgrover1 710:b2e1a2660ec2 153
rgrover1 710:b2e1a2660ec2 154 /*
rgrover1 710:b2e1a2660ec2 155 * The following functions are meant to be overridden in the platform-specific sub-class.
rgrover1 710:b2e1a2660ec2 156 */
rgrover1 710:b2e1a2660ec2 157 public:
rgrover1 710:b2e1a2660ec2 158 /**
rgrover1 710:b2e1a2660ec2 159 * Set the BTLE MAC address and type. Please note that the address format is
rgrover1 993:4d62b7967c11 160 * least significant byte first (LSB). Please refer to Address_t.
rgrover1 710:b2e1a2660ec2 161 *
rgrover1 710:b2e1a2660ec2 162 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 163 */
rgrover1 710:b2e1a2660ec2 164 virtual ble_error_t setAddress(AddressType_t type, const Address_t address) {
rgrover1 734:4872b70437ce 165 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 166 (void)type;
rgrover1 734:4872b70437ce 167 (void)address;
rgrover1 734:4872b70437ce 168
rgrover1 728:997ba5e7b3b6 169 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 170 }
rgrover1 710:b2e1a2660ec2 171
rgrover1 710:b2e1a2660ec2 172 /**
rgrover1 710:b2e1a2660ec2 173 * Fetch the BTLE MAC address and type.
rgrover1 710:b2e1a2660ec2 174 *
rgrover1 710:b2e1a2660ec2 175 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 176 */
rgrover1 710:b2e1a2660ec2 177 virtual ble_error_t getAddress(AddressType_t *typeP, Address_t address) {
rgrover1 993:4d62b7967c11 178 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 179 (void)typeP;
rgrover1 734:4872b70437ce 180 (void)address;
rgrover1 734:4872b70437ce 181
rgrover1 728:997ba5e7b3b6 182 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 183 }
rgrover1 710:b2e1a2660ec2 184
rgrover1 710:b2e1a2660ec2 185 /**
rgrover1 1031:e13fdc3dad07 186 * @return Minimum Advertising interval in milliseconds for connectable
rgrover1 1031:e13fdc3dad07 187 * undirected and connectable directed event types.
rgrover1 710:b2e1a2660ec2 188 */
rgrover1 710:b2e1a2660ec2 189 virtual uint16_t getMinAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 190 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 191 }
rgrover1 710:b2e1a2660ec2 192
rgrover1 710:b2e1a2660ec2 193 /**
rgrover1 1031:e13fdc3dad07 194 * @return Minimum Advertising interval in milliseconds for scannable
rgrover1 1031:e13fdc3dad07 195 * undirected and non-connectable undirected event types.
rgrover1 710:b2e1a2660ec2 196 */
rgrover1 710:b2e1a2660ec2 197 virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 198 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 199 }
rgrover1 710:b2e1a2660ec2 200
rgrover1 710:b2e1a2660ec2 201 /**
rgrover1 710:b2e1a2660ec2 202 * @return Maximum Advertising interval in milliseconds.
rgrover1 710:b2e1a2660ec2 203 */
rgrover1 710:b2e1a2660ec2 204 virtual uint16_t getMaxAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 205 return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 206 }
rgrover1 710:b2e1a2660ec2 207
rgrover1 710:b2e1a2660ec2 208 virtual ble_error_t stopAdvertising(void) {
rgrover1 728:997ba5e7b3b6 209 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 210 }
rgrover1 710:b2e1a2660ec2 211
rgrover1 710:b2e1a2660ec2 212 /**
rgrover1 710:b2e1a2660ec2 213 * Stop scanning. The current scanning parameters remain in effect.
rgrover1 710:b2e1a2660ec2 214 *
rgrover1 710:b2e1a2660ec2 215 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1 710:b2e1a2660ec2 216 */
rgrover1 710:b2e1a2660ec2 217 virtual ble_error_t stopScan() {
rgrover1 728:997ba5e7b3b6 218 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 219 }
rgrover1 710:b2e1a2660ec2 220
rgrover1 710:b2e1a2660ec2 221 /**
rgrover1 710:b2e1a2660ec2 222 * Create a connection (GAP Link Establishment).
rgrover1 710:b2e1a2660ec2 223 *
rgrover1 710:b2e1a2660ec2 224 * @param peerAddr
rgrover1 710:b2e1a2660ec2 225 * 48-bit address, LSB format.
rgrover1 710:b2e1a2660ec2 226 * @param peerAddrType
rgrover1 710:b2e1a2660ec2 227 * Address type of the peer.
rgrover1 710:b2e1a2660ec2 228 * @param connectionParams
rgrover1 710:b2e1a2660ec2 229 * Connection parameters.
rgrover1 710:b2e1a2660ec2 230 * @param scanParams
rgrover1 710:b2e1a2660ec2 231 * Paramters to be used while scanning for the peer.
rgrover1 710:b2e1a2660ec2 232 * @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1 829:9072de50087b 233 * successfully. The connectionCallChain (if set) will be invoked upon
rgrover1 710:b2e1a2660ec2 234 * a connection event.
rgrover1 710:b2e1a2660ec2 235 */
rgrover1 710:b2e1a2660ec2 236 virtual ble_error_t connect(const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 237 Gap::AddressType_t peerAddrType,
rgrover1 710:b2e1a2660ec2 238 const ConnectionParams_t *connectionParams,
rgrover1 710:b2e1a2660ec2 239 const GapScanningParams *scanParams) {
rgrover1 993:4d62b7967c11 240 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 241 (void)peerAddr;
rgrover1 734:4872b70437ce 242 (void)peerAddrType;
rgrover1 734:4872b70437ce 243 (void)connectionParams;
rgrover1 734:4872b70437ce 244 (void)scanParams;
rgrover1 734:4872b70437ce 245
rgrover1 728:997ba5e7b3b6 246 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 247 }
rgrover1 710:b2e1a2660ec2 248
rgrover1 710:b2e1a2660ec2 249 /**
rgrover1 710:b2e1a2660ec2 250 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 251 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 252 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 253 *
rgrover1 710:b2e1a2660ec2 254 * @param reason
rgrover1 993:4d62b7967c11 255 * The reason for disconnection; to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 256 */
rgrover1 710:b2e1a2660ec2 257 virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
rgrover1 734:4872b70437ce 258 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 259 (void)connectionHandle;
rgrover1 734:4872b70437ce 260 (void)reason;
rgrover1 734:4872b70437ce 261
rgrover1 728:997ba5e7b3b6 262 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 263 }
rgrover1 710:b2e1a2660ec2 264
rgrover1 710:b2e1a2660ec2 265 /**
rgrover1 710:b2e1a2660ec2 266 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 267 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 268 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 269 *
rgrover1 710:b2e1a2660ec2 270 * @param reason
rgrover1 993:4d62b7967c11 271 * The reason for disconnection; to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 272 *
rgrover1 993:4d62b7967c11 273 * @note: This version of disconnect() doesn't take a connection handle. It
rgrover1 993:4d62b7967c11 274 * works reliably only for stacks that are limited to a single
rgrover1 710:b2e1a2660ec2 275 * connection. This API should be considered *deprecated* in favour of the
rgrover1 993:4d62b7967c11 276 * alternative, which takes a connection handle. It will be dropped in the future.
rgrover1 710:b2e1a2660ec2 277 */
rgrover1 710:b2e1a2660ec2 278 virtual ble_error_t disconnect(DisconnectionReason_t reason) {
rgrover1 993:4d62b7967c11 279 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 280 (void)reason;
rgrover1 734:4872b70437ce 281
rgrover1 728:997ba5e7b3b6 282 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 283 }
rgrover1 710:b2e1a2660ec2 284
rgrover1 710:b2e1a2660ec2 285 /**
rgrover1 710:b2e1a2660ec2 286 * Get the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 287 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 288 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 289 *
rgrover1 710:b2e1a2660ec2 290 * @param[out] params
rgrover1 710:b2e1a2660ec2 291 * The structure where the parameters will be stored. Memory
rgrover1 710:b2e1a2660ec2 292 * for this is owned by the caller.
rgrover1 710:b2e1a2660ec2 293 *
rgrover1 710:b2e1a2660ec2 294 * @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1 710:b2e1a2660ec2 295 * the given structure pointed to by params.
rgrover1 710:b2e1a2660ec2 296 */
rgrover1 710:b2e1a2660ec2 297 virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
rgrover1 993:4d62b7967c11 298 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 299 (void)params;
rgrover1 734:4872b70437ce 300
rgrover1 728:997ba5e7b3b6 301 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 302 }
rgrover1 710:b2e1a2660ec2 303
rgrover1 710:b2e1a2660ec2 304 /**
rgrover1 710:b2e1a2660ec2 305 * Set the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 306 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 307 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 308 *
rgrover1 710:b2e1a2660ec2 309 * @param[in] params
rgrover1 710:b2e1a2660ec2 310 * The structure containing the desired parameters.
rgrover1 710:b2e1a2660ec2 311 */
rgrover1 710:b2e1a2660ec2 312 virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
rgrover1 993:4d62b7967c11 313 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 314 (void)params;
rgrover1 734:4872b70437ce 315
rgrover1 728:997ba5e7b3b6 316 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 317 }
rgrover1 710:b2e1a2660ec2 318
rgrover1 710:b2e1a2660ec2 319 /**
rgrover1 816:2b4f0ef8c06e 320 * Update connection parameters.
rgrover1 993:4d62b7967c11 321 * In the central role this will initiate a Link Layer connection parameter update procedure.
rgrover1 993:4d62b7967c11 322 * In the peripheral role, this will send the corresponding L2CAP request and wait for
rgrover1 816:2b4f0ef8c06e 323 * the central to perform the procedure.
rgrover1 816:2b4f0ef8c06e 324 *
rgrover1 710:b2e1a2660ec2 325 * @param[in] handle
rgrover1 993:4d62b7967c11 326 * Connection Handle.
rgrover1 710:b2e1a2660ec2 327 * @param[in] params
rgrover1 710:b2e1a2660ec2 328 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1 710:b2e1a2660ec2 329 * the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1 710:b2e1a2660ec2 330 */
rgrover1 710:b2e1a2660ec2 331 virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
rgrover1 734:4872b70437ce 332 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 333 (void)handle;
rgrover1 734:4872b70437ce 334 (void)params;
rgrover1 734:4872b70437ce 335
rgrover1 728:997ba5e7b3b6 336 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 337 }
rgrover1 710:b2e1a2660ec2 338
rgrover1 710:b2e1a2660ec2 339 /**
rgrover1 710:b2e1a2660ec2 340 * Set the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 341 * @param[in] deviceName
rgrover1 710:b2e1a2660ec2 342 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1 710:b2e1a2660ec2 343 */
rgrover1 710:b2e1a2660ec2 344 virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1 993:4d62b7967c11 345 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 346 (void)deviceName;
rgrover1 734:4872b70437ce 347
rgrover1 728:997ba5e7b3b6 348 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 349 }
rgrover1 710:b2e1a2660ec2 350
rgrover1 710:b2e1a2660ec2 351 /**
rgrover1 710:b2e1a2660ec2 352 * Get the value of the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 353 * @param[out] deviceName
rgrover1 710:b2e1a2660ec2 354 * Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1 710:b2e1a2660ec2 355 * terminated* string will be placed. Set this
rgrover1 710:b2e1a2660ec2 356 * value to NULL in order to obtain the deviceName-length
rgrover1 710:b2e1a2660ec2 357 * from the 'length' parameter.
rgrover1 710:b2e1a2660ec2 358 *
rgrover1 710:b2e1a2660ec2 359 * @param[in/out] lengthP
rgrover1 710:b2e1a2660ec2 360 * (on input) Length of the buffer pointed to by deviceName;
rgrover1 710:b2e1a2660ec2 361 * (on output) the complete device name length (without the
rgrover1 710:b2e1a2660ec2 362 * null terminator).
rgrover1 710:b2e1a2660ec2 363 *
rgrover1 710:b2e1a2660ec2 364 * @note If the device name is longer than the size of the supplied buffer,
rgrover1 710:b2e1a2660ec2 365 * length will return the complete device name length, and not the
rgrover1 710:b2e1a2660ec2 366 * number of bytes actually returned in deviceName. The application may
rgrover1 710:b2e1a2660ec2 367 * use this information to retry with a suitable buffer size.
rgrover1 710:b2e1a2660ec2 368 */
rgrover1 710:b2e1a2660ec2 369 virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
rgrover1 734:4872b70437ce 370 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 371 (void)deviceName;
rgrover1 734:4872b70437ce 372 (void)lengthP;
rgrover1 734:4872b70437ce 373
rgrover1 728:997ba5e7b3b6 374 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 375 }
rgrover1 710:b2e1a2660ec2 376
rgrover1 710:b2e1a2660ec2 377 /**
rgrover1 710:b2e1a2660ec2 378 * Set the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 379 * @param[in] appearance
rgrover1 710:b2e1a2660ec2 380 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 381 */
rgrover1 710:b2e1a2660ec2 382 virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1 993:4d62b7967c11 383 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 384 (void)appearance;
rgrover1 734:4872b70437ce 385
rgrover1 728:997ba5e7b3b6 386 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 387 }
rgrover1 710:b2e1a2660ec2 388
rgrover1 710:b2e1a2660ec2 389 /**
rgrover1 710:b2e1a2660ec2 390 * Get the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 391 * @param[out] appearance
rgrover1 710:b2e1a2660ec2 392 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 393 */
rgrover1 710:b2e1a2660ec2 394 virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1 993:4d62b7967c11 395 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 396 (void)appearanceP;
rgrover1 734:4872b70437ce 397
rgrover1 728:997ba5e7b3b6 398 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 399 }
rgrover1 710:b2e1a2660ec2 400
rgrover1 710:b2e1a2660ec2 401 /**
rgrover1 710:b2e1a2660ec2 402 * Set the radio's transmit power.
rgrover1 710:b2e1a2660ec2 403 * @param[in] txPower Radio transmit power in dBm.
rgrover1 710:b2e1a2660ec2 404 */
rgrover1 710:b2e1a2660ec2 405 virtual ble_error_t setTxPower(int8_t txPower) {
rgrover1 993:4d62b7967c11 406 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 407 (void)txPower;
rgrover1 734:4872b70437ce 408
rgrover1 728:997ba5e7b3b6 409 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 410 }
rgrover1 710:b2e1a2660ec2 411
rgrover1 710:b2e1a2660ec2 412 /**
rgrover1 710:b2e1a2660ec2 413 * Query the underlying stack for permitted arguments for setTxPower().
rgrover1 710:b2e1a2660ec2 414 *
rgrover1 710:b2e1a2660ec2 415 * @param[out] valueArrayPP
rgrover1 710:b2e1a2660ec2 416 * Out parameter to receive the immutable array of Tx values.
rgrover1 710:b2e1a2660ec2 417 * @param[out] countP
rgrover1 710:b2e1a2660ec2 418 * Out parameter to receive the array's size.
rgrover1 710:b2e1a2660ec2 419 */
rgrover1 710:b2e1a2660ec2 420 virtual void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
rgrover1 993:4d62b7967c11 421 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 422 (void)valueArrayPP;
rgrover1 734:4872b70437ce 423 (void)countP;
rgrover1 734:4872b70437ce 424
rgrover1 742:861ed7eb186d 425 *countP = 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 426 }
rgrover1 710:b2e1a2660ec2 427
rgrover1 710:b2e1a2660ec2 428 protected:
rgrover1 710:b2e1a2660ec2 429 /* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
rgrover1 710:b2e1a2660ec2 430 virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
rgrover1 772:b6d27ab66c94 431 (void)scanningParams;
rgrover1 728:997ba5e7b3b6 432 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 433 }
rgrover1 710:b2e1a2660ec2 434
rgrover1 710:b2e1a2660ec2 435 /*
rgrover1 710:b2e1a2660ec2 436 * APIs with non-virtual implementations.
rgrover1 710:b2e1a2660ec2 437 */
rgrover1 710:b2e1a2660ec2 438 public:
rgrover1 710:b2e1a2660ec2 439 /**
rgrover1 993:4d62b7967c11 440 * Returns the current GAP state of the device using a bitmask that
rgrover1 993:4d62b7967c11 441 * describes whether the device is advertising or connected.
rgrover1 710:b2e1a2660ec2 442 */
rgrover1 710:b2e1a2660ec2 443 GapState_t getState(void) const {
rgrover1 710:b2e1a2660ec2 444 return state;
rgrover1 710:b2e1a2660ec2 445 }
rgrover1 710:b2e1a2660ec2 446
rgrover1 710:b2e1a2660ec2 447 /**
rgrover1 710:b2e1a2660ec2 448 * Set the GAP advertising mode to use for this device.
rgrover1 710:b2e1a2660ec2 449 */
rgrover1 710:b2e1a2660ec2 450 void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
rgrover1 710:b2e1a2660ec2 451 _advParams.setAdvertisingType(advType);
rgrover1 710:b2e1a2660ec2 452 }
rgrover1 710:b2e1a2660ec2 453
rgrover1 710:b2e1a2660ec2 454 /**
rgrover1 710:b2e1a2660ec2 455 * @param[in] interval
rgrover1 710:b2e1a2660ec2 456 * Advertising interval in units of milliseconds. Advertising
rgrover1 710:b2e1a2660ec2 457 * is disabled if interval is 0. If interval is smaller than
rgrover1 710:b2e1a2660ec2 458 * the minimum supported value, then the minimum supported
rgrover1 710:b2e1a2660ec2 459 * value is used instead. This minimum value can be discovered
rgrover1 710:b2e1a2660ec2 460 * using getMinAdvertisingInterval().
rgrover1 710:b2e1a2660ec2 461 *
rgrover1 710:b2e1a2660ec2 462 * This field must be set to 0 if connectionMode is equal
rgrover1 710:b2e1a2660ec2 463 * to ADV_CONNECTABLE_DIRECTED.
rgrover1 710:b2e1a2660ec2 464 *
rgrover1 710:b2e1a2660ec2 465 * @note: Decreasing this value will allow central devices to detect a
rgrover1 993:4d62b7967c11 466 * peripheral faster, at the expense of more power being used by the radio
rgrover1 710:b2e1a2660ec2 467 * due to the higher data transmit rate.
rgrover1 710:b2e1a2660ec2 468 *
rgrover1 710:b2e1a2660ec2 469 * @Note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1 710:b2e1a2660ec2 470 * 'interval' argument. That required an explicit conversion from
rgrover1 710:b2e1a2660ec2 471 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1 710:b2e1a2660ec2 472 * no longer required as the new units are milliseconds. Any application
rgrover1 993:4d62b7967c11 473 * code depending on the old semantics needs to be updated accordingly.
rgrover1 710:b2e1a2660ec2 474 */
rgrover1 710:b2e1a2660ec2 475 void setAdvertisingInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 476 if (interval == 0) {
rgrover1 710:b2e1a2660ec2 477 stopAdvertising();
rgrover1 710:b2e1a2660ec2 478 } else if (interval < getMinAdvertisingInterval()) {
rgrover1 710:b2e1a2660ec2 479 interval = getMinAdvertisingInterval();
rgrover1 710:b2e1a2660ec2 480 }
rgrover1 786:d6d7087d8377 481 _advParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 482 }
rgrover1 710:b2e1a2660ec2 483
rgrover1 710:b2e1a2660ec2 484 /**
rgrover1 710:b2e1a2660ec2 485 * @param[in] timeout
rgrover1 710:b2e1a2660ec2 486 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1 710:b2e1a2660ec2 487 * and 16383). Use 0 to disable the advertising timeout.
rgrover1 710:b2e1a2660ec2 488 */
rgrover1 710:b2e1a2660ec2 489 void setAdvertisingTimeout(uint16_t timeout) {
rgrover1 710:b2e1a2660ec2 490 _advParams.setTimeout(timeout);
rgrover1 710:b2e1a2660ec2 491 }
rgrover1 710:b2e1a2660ec2 492
rgrover1 710:b2e1a2660ec2 493 /**
rgrover1 710:b2e1a2660ec2 494 * Start advertising.
rgrover1 710:b2e1a2660ec2 495 */
rgrover1 710:b2e1a2660ec2 496 ble_error_t startAdvertising(void) {
rgrover1 993:4d62b7967c11 497 setAdvertisingData(); /* Update the underlying stack. */
rgrover1 710:b2e1a2660ec2 498 return startAdvertising(_advParams);
rgrover1 710:b2e1a2660ec2 499 }
rgrover1 710:b2e1a2660ec2 500
rgrover1 710:b2e1a2660ec2 501 /**
rgrover1 710:b2e1a2660ec2 502 * Reset any advertising payload prepared from prior calls to
rgrover1 710:b2e1a2660ec2 503 * accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1 993:4d62b7967c11 504 * initialized advertising payload to the underlying stack.
rgrover1 710:b2e1a2660ec2 505 */
rgrover1 710:b2e1a2660ec2 506 void clearAdvertisingPayload(void) {
rgrover1 710:b2e1a2660ec2 507 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 508 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 509 }
rgrover1 710:b2e1a2660ec2 510
rgrover1 710:b2e1a2660ec2 511 /**
rgrover1 710:b2e1a2660ec2 512 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 513 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 993:4d62b7967c11 514 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 515 * small.
rgrover1 710:b2e1a2660ec2 516 *
rgrover1 710:b2e1a2660ec2 517 * @param[in] flags
rgrover1 710:b2e1a2660ec2 518 * The flags to be added. Please refer to
rgrover1 710:b2e1a2660ec2 519 * GapAdvertisingData::Flags for valid flags. Multiple
rgrover1 710:b2e1a2660ec2 520 * flags may be specified in combination.
rgrover1 710:b2e1a2660ec2 521 */
rgrover1 710:b2e1a2660ec2 522 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1 710:b2e1a2660ec2 523 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 524 if ((rc = _advPayload.addFlags(flags)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 525 return rc;
rgrover1 710:b2e1a2660ec2 526 }
rgrover1 710:b2e1a2660ec2 527
rgrover1 710:b2e1a2660ec2 528 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 529 }
rgrover1 710:b2e1a2660ec2 530
rgrover1 710:b2e1a2660ec2 531 /**
rgrover1 710:b2e1a2660ec2 532 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 533 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 993:4d62b7967c11 534 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 535 * small.
rgrover1 710:b2e1a2660ec2 536 *
rgrover1 710:b2e1a2660ec2 537 * @param app
rgrover1 710:b2e1a2660ec2 538 * The appearance of the peripheral.
rgrover1 710:b2e1a2660ec2 539 */
rgrover1 710:b2e1a2660ec2 540 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1 710:b2e1a2660ec2 541 setAppearance(app);
rgrover1 710:b2e1a2660ec2 542
rgrover1 710:b2e1a2660ec2 543 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 544 if ((rc = _advPayload.addAppearance(app)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 545 return rc;
rgrover1 710:b2e1a2660ec2 546 }
rgrover1 710:b2e1a2660ec2 547
rgrover1 710:b2e1a2660ec2 548 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 549 }
rgrover1 710:b2e1a2660ec2 550
rgrover1 710:b2e1a2660ec2 551 /**
rgrover1 710:b2e1a2660ec2 552 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 553 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 993:4d62b7967c11 554 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 555 * small.
rgrover1 710:b2e1a2660ec2 556 *
rgrover1 993:4d62b7967c11 557 * @param power
rgrover1 764:1e560f0d45e1 558 * The max transmit power to be used by the controller (in dBm).
rgrover1 710:b2e1a2660ec2 559 */
rgrover1 710:b2e1a2660ec2 560 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1 710:b2e1a2660ec2 561 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 562 if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 563 return rc;
rgrover1 710:b2e1a2660ec2 564 }
rgrover1 710:b2e1a2660ec2 565
rgrover1 710:b2e1a2660ec2 566 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 567 }
rgrover1 710:b2e1a2660ec2 568
rgrover1 710:b2e1a2660ec2 569 /**
rgrover1 710:b2e1a2660ec2 570 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 571 * advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1 710:b2e1a2660ec2 572 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1 993:4d62b7967c11 573 * advertising payload is too small.
rgrover1 710:b2e1a2660ec2 574 *
rgrover1 993:4d62b7967c11 575 * @param type The type describing the variable length data.
rgrover1 993:4d62b7967c11 576 * @param data Data bytes.
rgrover1 993:4d62b7967c11 577 * @param len Length of data.
rgrover1 710:b2e1a2660ec2 578 */
rgrover1 710:b2e1a2660ec2 579 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 580 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 710:b2e1a2660ec2 581 setDeviceName(data);
rgrover1 710:b2e1a2660ec2 582 }
rgrover1 710:b2e1a2660ec2 583
rgrover1 710:b2e1a2660ec2 584 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 585 if ((rc = _advPayload.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 586 return rc;
rgrover1 710:b2e1a2660ec2 587 }
rgrover1 710:b2e1a2660ec2 588
rgrover1 710:b2e1a2660ec2 589 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 590 }
rgrover1 710:b2e1a2660ec2 591
rgrover1 710:b2e1a2660ec2 592 /**
rgrover1 765:4cd91998cd48 593 * Update a particular ADV field in the advertising payload (based on
rgrover1 765:4cd91998cd48 594 * matching type and length). Note: the length of the new data must be the
rgrover1 765:4cd91998cd48 595 * same as the old one.
rgrover1 763:36c3e2b1f1ae 596 *
rgrover1 993:4d62b7967c11 597 * @param[in] type The ADV type field describing the variable length data.
rgrover1 993:4d62b7967c11 598 * @param[in] data Data bytes.
rgrover1 993:4d62b7967c11 599 * @param[in] len Length of data.
rgrover1 765:4cd91998cd48 600 *
rgrover1 765:4cd91998cd48 601 * @note: If advertisements are enabled, then the update will take effect immediately.
rgrover1 765:4cd91998cd48 602 *
rgrover1 765:4cd91998cd48 603 * @return BLE_ERROR_NONE if the advertisement payload was updated based on
rgrover1 993:4d62b7967c11 604 * a <type, len> match; otherwise, an appropriate error.
rgrover1 763:36c3e2b1f1ae 605 */
rgrover1 763:36c3e2b1f1ae 606 ble_error_t updateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 763:36c3e2b1f1ae 607 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 763:36c3e2b1f1ae 608 setDeviceName(data);
rgrover1 763:36c3e2b1f1ae 609 }
rgrover1 763:36c3e2b1f1ae 610
rgrover1 763:36c3e2b1f1ae 611 ble_error_t rc;
rgrover1 763:36c3e2b1f1ae 612 if ((rc = _advPayload.updateData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 763:36c3e2b1f1ae 613 return rc;
rgrover1 763:36c3e2b1f1ae 614 }
rgrover1 763:36c3e2b1f1ae 615
rgrover1 763:36c3e2b1f1ae 616 return setAdvertisingData();
rgrover1 763:36c3e2b1f1ae 617 }
rgrover1 763:36c3e2b1f1ae 618
rgrover1 763:36c3e2b1f1ae 619 /**
rgrover1 993:4d62b7967c11 620 * Set up a particular, user-constructed advertisement payload for the
rgrover1 710:b2e1a2660ec2 621 * underlying stack. It would be uncommon for this API to be used directly;
rgrover1 710:b2e1a2660ec2 622 * there are other APIs to build an advertisement payload (see above).
rgrover1 710:b2e1a2660ec2 623 */
rgrover1 710:b2e1a2660ec2 624 ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
rgrover1 710:b2e1a2660ec2 625 _advPayload = payload;
rgrover1 710:b2e1a2660ec2 626 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 627 }
rgrover1 710:b2e1a2660ec2 628
rgrover1 710:b2e1a2660ec2 629 /**
rgrover1 710:b2e1a2660ec2 630 * @return Read back advertising data. Useful for storing and
rgrover1 710:b2e1a2660ec2 631 * restoring payload.
rgrover1 710:b2e1a2660ec2 632 */
rgrover1 710:b2e1a2660ec2 633 const GapAdvertisingData &getAdvertisingPayload(void) const {
rgrover1 710:b2e1a2660ec2 634 return _advPayload;
rgrover1 710:b2e1a2660ec2 635 }
rgrover1 710:b2e1a2660ec2 636
rgrover1 710:b2e1a2660ec2 637 /**
rgrover1 710:b2e1a2660ec2 638 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 639 * scanResponse payload.
rgrover1 710:b2e1a2660ec2 640 *
rgrover1 993:4d62b7967c11 641 * @param[in] type The type describing the variable length data.
rgrover1 993:4d62b7967c11 642 * @param[in] data Data bytes.
rgrover1 993:4d62b7967c11 643 * @param[in] len Length of data.
rgrover1 710:b2e1a2660ec2 644 */
rgrover1 710:b2e1a2660ec2 645 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 646 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 647 if ((rc = _scanResponse.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 648 return rc;
rgrover1 710:b2e1a2660ec2 649 }
rgrover1 710:b2e1a2660ec2 650
rgrover1 710:b2e1a2660ec2 651 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 652 }
rgrover1 710:b2e1a2660ec2 653
rgrover1 710:b2e1a2660ec2 654 /**
rgrover1 710:b2e1a2660ec2 655 * Reset any scan response prepared from prior calls to
rgrover1 710:b2e1a2660ec2 656 * accumulateScanResponse().
rgrover1 710:b2e1a2660ec2 657 *
rgrover1 710:b2e1a2660ec2 658 * Note: This should be followed by a call to setAdvertisingPayload() or
rgrover1 710:b2e1a2660ec2 659 * startAdvertising() before the update takes effect.
rgrover1 710:b2e1a2660ec2 660 */
rgrover1 710:b2e1a2660ec2 661 void clearScanResponse(void) {
rgrover1 710:b2e1a2660ec2 662 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 663 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 664 }
rgrover1 710:b2e1a2660ec2 665
rgrover1 710:b2e1a2660ec2 666 /**
rgrover1 993:4d62b7967c11 667 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 668 * @param[in] interval
rgrover1 710:b2e1a2660ec2 669 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 670 * @param[in] window
rgrover1 710:b2e1a2660ec2 671 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 672 * @param[in] timeout
rgrover1 993:4d62b7967c11 673 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
rgrover1 710:b2e1a2660ec2 674 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 675 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 676 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 677 *
rgrover1 710:b2e1a2660ec2 678 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 679 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 680 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 681 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 682 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 683 * interval.
rgrover1 710:b2e1a2660ec2 684 *
rgrover1 710:b2e1a2660ec2 685 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 686 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 687 *
rgrover1 710:b2e1a2660ec2 688 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 710:b2e1a2660ec2 689 */
rgrover1 710:b2e1a2660ec2 690 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1 710:b2e1a2660ec2 691 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1 710:b2e1a2660ec2 692 uint16_t timeout = 0,
rgrover1 710:b2e1a2660ec2 693 bool activeScanning = false) {
rgrover1 710:b2e1a2660ec2 694 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 695 if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 696 ((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 697 ((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
rgrover1 710:b2e1a2660ec2 698 _scanningParams.setActiveScanning(activeScanning);
rgrover1 710:b2e1a2660ec2 699 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 700 }
rgrover1 710:b2e1a2660ec2 701
rgrover1 710:b2e1a2660ec2 702 return rc;
rgrover1 710:b2e1a2660ec2 703 }
rgrover1 710:b2e1a2660ec2 704
rgrover1 710:b2e1a2660ec2 705 /**
rgrover1 993:4d62b7967c11 706 * Set up the scanInterval parameter for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 707 * @param[in] interval
rgrover1 710:b2e1a2660ec2 708 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 709 *
rgrover1 710:b2e1a2660ec2 710 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 711 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 712 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 713 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 714 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 715 * interval.
rgrover1 710:b2e1a2660ec2 716 *
rgrover1 710:b2e1a2660ec2 717 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 718 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 719 */
rgrover1 710:b2e1a2660ec2 720 ble_error_t setScanInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 721 return _scanningParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 722 }
rgrover1 710:b2e1a2660ec2 723
rgrover1 710:b2e1a2660ec2 724 /**
rgrover1 993:4d62b7967c11 725 * Set up the scanWindow parameter for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 726 * @param[in] window
rgrover1 710:b2e1a2660ec2 727 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 728 *
rgrover1 710:b2e1a2660ec2 729 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 730 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 731 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 732 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 733 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 734 * interval.
rgrover1 710:b2e1a2660ec2 735 *
rgrover1 710:b2e1a2660ec2 736 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 737 * enabled by using startScan().
rgrover1 770:079b714e9c1a 738 *
rgrover1 770:079b714e9c1a 739 * If scanning is already active, the updated value of scanWindow will be
rgrover1 770:079b714e9c1a 740 * propagated to the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 741 */
rgrover1 710:b2e1a2660ec2 742 ble_error_t setScanWindow(uint16_t window) {
rgrover1 770:079b714e9c1a 743 ble_error_t rc;
rgrover1 770:079b714e9c1a 744 if ((rc = _scanningParams.setWindow(window)) != BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 745 return rc;
rgrover1 770:079b714e9c1a 746 }
rgrover1 770:079b714e9c1a 747
rgrover1 770:079b714e9c1a 748 /* If scanning is already active, propagate the new setting to the stack. */
rgrover1 770:079b714e9c1a 749 if (scanningActive) {
rgrover1 770:079b714e9c1a 750 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 751 }
rgrover1 770:079b714e9c1a 752
rgrover1 770:079b714e9c1a 753 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 754 }
rgrover1 710:b2e1a2660ec2 755
rgrover1 710:b2e1a2660ec2 756 /**
rgrover1 993:4d62b7967c11 757 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 758 * @param[in] timeout
rgrover1 993:4d62b7967c11 759 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
rgrover1 710:b2e1a2660ec2 760 *
rgrover1 710:b2e1a2660ec2 761 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 762 * enabled by using startScan().
rgrover1 770:079b714e9c1a 763 *
rgrover1 770:079b714e9c1a 764 * If scanning is already active, the updated value of scanTimeout will be
rgrover1 770:079b714e9c1a 765 * propagated to the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 766 */
rgrover1 710:b2e1a2660ec2 767 ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1 770:079b714e9c1a 768 ble_error_t rc;
rgrover1 770:079b714e9c1a 769 if ((rc = _scanningParams.setTimeout(timeout)) != BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 770 return rc;
rgrover1 770:079b714e9c1a 771 }
rgrover1 770:079b714e9c1a 772
rgrover1 770:079b714e9c1a 773 /* If scanning is already active, propagate the new settings to the stack. */
rgrover1 770:079b714e9c1a 774 if (scanningActive) {
rgrover1 770:079b714e9c1a 775 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 776 }
rgrover1 770:079b714e9c1a 777
rgrover1 770:079b714e9c1a 778 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 779 }
rgrover1 710:b2e1a2660ec2 780
rgrover1 710:b2e1a2660ec2 781 /**
rgrover1 993:4d62b7967c11 782 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 783 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 784 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 785 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 786 *
rgrover1 710:b2e1a2660ec2 787 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 788 * enabled by using startScan().
rgrover1 770:079b714e9c1a 789 *
rgrover1 770:079b714e9c1a 790 * If scanning is already in progress, then active-scanning will be enabled
rgrover1 770:079b714e9c1a 791 * for the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 792 */
rgrover1 770:079b714e9c1a 793 ble_error_t setActiveScanning(bool activeScanning) {
rgrover1 710:b2e1a2660ec2 794 _scanningParams.setActiveScanning(activeScanning);
rgrover1 770:079b714e9c1a 795
rgrover1 770:079b714e9c1a 796 /* If scanning is already active, propagate the new settings to the stack. */
rgrover1 770:079b714e9c1a 797 if (scanningActive) {
rgrover1 770:079b714e9c1a 798 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 799 }
rgrover1 770:079b714e9c1a 800
rgrover1 770:079b714e9c1a 801 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 802 }
rgrover1 710:b2e1a2660ec2 803
rgrover1 710:b2e1a2660ec2 804 /**
rgrover1 710:b2e1a2660ec2 805 * Start scanning (Observer Procedure) based on the parameters currently in
rgrover1 710:b2e1a2660ec2 806 * effect.
rgrover1 710:b2e1a2660ec2 807 *
rgrover1 710:b2e1a2660ec2 808 * @param[in] callback
rgrover1 993:4d62b7967c11 809 * The application-specific callback to be invoked upon
rgrover1 710:b2e1a2660ec2 810 * receiving every advertisement report. This can be passed in
rgrover1 710:b2e1a2660ec2 811 * as NULL, in which case scanning may not be enabled at all.
rgrover1 710:b2e1a2660ec2 812 */
rgrover1 710:b2e1a2660ec2 813 ble_error_t startScan(void (*callback)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 814 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 815 if (callback) {
rgrover1 710:b2e1a2660ec2 816 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 817 scanningActive = true;
rgrover1 710:b2e1a2660ec2 818 onAdvertisementReport.attach(callback);
rgrover1 710:b2e1a2660ec2 819 }
rgrover1 710:b2e1a2660ec2 820 }
rgrover1 710:b2e1a2660ec2 821
rgrover1 710:b2e1a2660ec2 822 return err;
rgrover1 710:b2e1a2660ec2 823 }
rgrover1 710:b2e1a2660ec2 824
rgrover1 710:b2e1a2660ec2 825 /**
rgrover1 710:b2e1a2660ec2 826 * Same as above, but this takes an (object, method) pair for a callback.
rgrover1 710:b2e1a2660ec2 827 */
rgrover1 710:b2e1a2660ec2 828 template<typename T>
rgrover1 710:b2e1a2660ec2 829 ble_error_t startScan(T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 830 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 831 if (object && callbackMember) {
rgrover1 710:b2e1a2660ec2 832 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 833 scanningActive = true;
rgrover1 710:b2e1a2660ec2 834 onAdvertisementReport.attach(object, callbackMember);
rgrover1 710:b2e1a2660ec2 835 }
rgrover1 710:b2e1a2660ec2 836 }
rgrover1 710:b2e1a2660ec2 837
rgrover1 710:b2e1a2660ec2 838 return err;
rgrover1 710:b2e1a2660ec2 839 }
rgrover1 710:b2e1a2660ec2 840
rgrover1 753:0f60274cd3ad 841 /**
rgrover1 753:0f60274cd3ad 842 * Initialize radio-notification events to be generated from the stack.
rgrover1 993:4d62b7967c11 843 * This API doesn't need to be called directly.
rgrover1 753:0f60274cd3ad 844 *
rgrover1 753:0f60274cd3ad 845 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 753:0f60274cd3ad 846 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 847 * radio is in use.
rgrover1 753:0f60274cd3ad 848 *
rgrover1 993:4d62b7967c11 849 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
rgrover1 993:4d62b7967c11 850 * signal is sent at the end of the radio event. These signals can be used
rgrover1 753:0f60274cd3ad 851 * by the application programmer to synchronize application logic with radio
rgrover1 753:0f60274cd3ad 852 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 993:4d62b7967c11 853 * devices, to manage peak current drawn during periods when the radio is on,
rgrover1 753:0f60274cd3ad 854 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 753:0f60274cd3ad 855 *
rgrover1 753:0f60274cd3ad 856 * @return BLE_ERROR_NONE on successful initialization, otherwise an error code.
rgrover1 753:0f60274cd3ad 857 */
rgrover1 753:0f60274cd3ad 858 virtual ble_error_t initRadioNotification(void) {
rgrover1 753:0f60274cd3ad 859 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 753:0f60274cd3ad 860 }
rgrover1 753:0f60274cd3ad 861
rgrover1 710:b2e1a2660ec2 862 private:
rgrover1 710:b2e1a2660ec2 863 ble_error_t setAdvertisingData(void) {
rgrover1 710:b2e1a2660ec2 864 return setAdvertisingData(_advPayload, _scanResponse);
rgrover1 710:b2e1a2660ec2 865 }
rgrover1 710:b2e1a2660ec2 866
rgrover1 710:b2e1a2660ec2 867 private:
rgrover1 896:791741895cd8 868 virtual ble_error_t setAdvertisingData(const GapAdvertisingData &advData, const GapAdvertisingData &scanResponse) = 0;
rgrover1 896:791741895cd8 869 virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
rgrover1 710:b2e1a2660ec2 870
rgrover1 710:b2e1a2660ec2 871 public:
rgrover1 710:b2e1a2660ec2 872 /**
rgrover1 710:b2e1a2660ec2 873 * Accessors to read back currently active advertising params.
rgrover1 710:b2e1a2660ec2 874 */
rgrover1 710:b2e1a2660ec2 875 GapAdvertisingParams &getAdvertisingParams(void) {
rgrover1 710:b2e1a2660ec2 876 return _advParams;
rgrover1 710:b2e1a2660ec2 877 }
rgrover1 710:b2e1a2660ec2 878 const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1 710:b2e1a2660ec2 879 return _advParams;
rgrover1 710:b2e1a2660ec2 880 }
rgrover1 710:b2e1a2660ec2 881
rgrover1 710:b2e1a2660ec2 882 /**
rgrover1 993:4d62b7967c11 883 * Set up a particular, user-constructed set of advertisement parameters for
rgrover1 710:b2e1a2660ec2 884 * the underlying stack. It would be uncommon for this API to be used
rgrover1 710:b2e1a2660ec2 885 * directly; there are other APIs to tweak advertisement parameters
rgrover1 710:b2e1a2660ec2 886 * individually.
rgrover1 710:b2e1a2660ec2 887 */
rgrover1 710:b2e1a2660ec2 888 void setAdvertisingParams(const GapAdvertisingParams &newParams) {
rgrover1 710:b2e1a2660ec2 889 _advParams = newParams;
rgrover1 710:b2e1a2660ec2 890 }
rgrover1 710:b2e1a2660ec2 891
rgrover1 710:b2e1a2660ec2 892 /* Event callback handlers. */
rgrover1 710:b2e1a2660ec2 893 public:
rgrover1 710:b2e1a2660ec2 894 /**
rgrover1 993:4d62b7967c11 895 * Set up a callback for timeout events. Refer to TimeoutSource_t for
rgrover1 710:b2e1a2660ec2 896 * possible event types.
rgrover1 993:4d62b7967c11 897 * @note It is possible to unregister callbacks using onTimeout().detach(callback)
rgrover1 710:b2e1a2660ec2 898 */
rgrover1 993:4d62b7967c11 899 void onTimeout(TimeoutEventCallback_t callback) {
rgrover1 993:4d62b7967c11 900 timeoutCallbackChain.add(callback);
rgrover1 993:4d62b7967c11 901 }
rgrover1 993:4d62b7967c11 902
rgrover1 993:4d62b7967c11 903 /**
rgrover1 993:4d62b7967c11 904 * @brief provide access to the callchain of timeout event callbacks
rgrover1 993:4d62b7967c11 905 * It is possible to register callbacks using onTimeout().add(callback);
rgrover1 1029:a5d0fec3b17c 906 * It is possible to unregister callbacks using onTimeout().detach(callback)
rgrover1 993:4d62b7967c11 907 * @return The timeout event callbacks chain
rgrover1 993:4d62b7967c11 908 */
rgrover1 993:4d62b7967c11 909 TimeoutEventCallbackChain_t& onTimeout() {
rgrover1 993:4d62b7967c11 910 return timeoutCallbackChain;
rgrover1 993:4d62b7967c11 911 }
rgrover1 710:b2e1a2660ec2 912
rgrover1 710:b2e1a2660ec2 913 /**
rgrover1 829:9072de50087b 914 * Append to a chain of callbacks to be invoked upon GAP connection.
rgrover1 993:4d62b7967c11 915 * @note It is possible to unregister callbacks using onConnection().detach(callback)
rgrover1 710:b2e1a2660ec2 916 */
rgrover1 829:9072de50087b 917 void onConnection(ConnectionEventCallback_t callback) {connectionCallChain.add(callback);}
rgrover1 710:b2e1a2660ec2 918
rgrover1 829:9072de50087b 919 template<typename T>
rgrover1 829:9072de50087b 920 void onConnection(T *tptr, void (T::*mptr)(const ConnectionCallbackParams_t*)) {connectionCallChain.add(tptr, mptr);}
rgrover1 710:b2e1a2660ec2 921
rgrover1 710:b2e1a2660ec2 922 /**
rgrover1 993:4d62b7967c11 923 * @brief provide access to the callchain of connection event callbacks
rgrover1 993:4d62b7967c11 924 * It is possible to register callbacks using onConnection().add(callback);
rgrover1 1029:a5d0fec3b17c 925 * It is possible to unregister callbacks using onConnection().detach(callback)
rgrover1 993:4d62b7967c11 926 * @return The connection event callbacks chain
rgrover1 993:4d62b7967c11 927 */
rgrover1 1029:a5d0fec3b17c 928 ConnectionEventCallbackChain_t& onConnection() {
rgrover1 993:4d62b7967c11 929 return connectionCallChain;
rgrover1 993:4d62b7967c11 930 }
rgrover1 993:4d62b7967c11 931
rgrover1 993:4d62b7967c11 932 /**
rgrover1 829:9072de50087b 933 * Append to a chain of callbacks to be invoked upon GAP disconnection.
rgrover1 993:4d62b7967c11 934 * @note It is possible to unregister callbacks using onDisconnection().detach(callback)
rgrover1 816:2b4f0ef8c06e 935 */
rgrover1 829:9072de50087b 936 void onDisconnection(DisconnectionEventCallback_t callback) {disconnectionCallChain.add(callback);}
rgrover1 816:2b4f0ef8c06e 937
rgrover1 710:b2e1a2660ec2 938 template<typename T>
rgrover1 829:9072de50087b 939 void onDisconnection(T *tptr, void (T::*mptr)(const DisconnectionCallbackParams_t*)) {disconnectionCallChain.add(tptr, mptr);}
rgrover1 710:b2e1a2660ec2 940
rgrover1 710:b2e1a2660ec2 941 /**
rgrover1 993:4d62b7967c11 942 * @brief provide access to the callchain of disconnection event callbacks
rgrover1 993:4d62b7967c11 943 * It is possible to register callbacks using onDisconnection().add(callback);
rgrover1 1029:a5d0fec3b17c 944 * It is possible to unregister callbacks using onDisconnection().detach(callback)
rgrover1 993:4d62b7967c11 945 * @return The disconnection event callbacks chain
rgrover1 993:4d62b7967c11 946 */
rgrover1 993:4d62b7967c11 947 DisconnectionEventCallbackChain_t& onDisconnection() {
rgrover1 993:4d62b7967c11 948 return disconnectionCallChain;
rgrover1 993:4d62b7967c11 949 }
rgrover1 993:4d62b7967c11 950
rgrover1 993:4d62b7967c11 951 /**
rgrover1 710:b2e1a2660ec2 952 * Set the application callback for radio-notification events.
rgrover1 710:b2e1a2660ec2 953 *
rgrover1 710:b2e1a2660ec2 954 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 710:b2e1a2660ec2 955 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 956 * radio is in use.
rgrover1 710:b2e1a2660ec2 957 *
rgrover1 993:4d62b7967c11 958 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
rgrover1 993:4d62b7967c11 959 * signal is sent at the end of the radio event. These signals can be used
rgrover1 710:b2e1a2660ec2 960 * by the application programmer to synchronize application logic with radio
rgrover1 710:b2e1a2660ec2 961 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 993:4d62b7967c11 962 * devices, to manage peak current drawn during periods when the radio is on,
rgrover1 710:b2e1a2660ec2 963 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 710:b2e1a2660ec2 964 *
rgrover1 710:b2e1a2660ec2 965 * @param callback
rgrover1 710:b2e1a2660ec2 966 * The application handler to be invoked in response to a radio
rgrover1 710:b2e1a2660ec2 967 * ACTIVE/INACTIVE event.
rgrover1 754:9b391fb5c5d7 968 *
rgrover1 993:4d62b7967c11 969 * Or in the other version:
rgrover1 754:9b391fb5c5d7 970 *
rgrover1 754:9b391fb5c5d7 971 * @param tptr
rgrover1 754:9b391fb5c5d7 972 * Pointer to the object of a class defining the member callback
rgrover1 754:9b391fb5c5d7 973 * function (mptr).
rgrover1 754:9b391fb5c5d7 974 * @param mptr
rgrover1 754:9b391fb5c5d7 975 * The member callback (within the context of an object) to be
rgrover1 754:9b391fb5c5d7 976 * invoked in response to a radio ACTIVE/INACTIVE event.
rgrover1 710:b2e1a2660ec2 977 */
rgrover1 753:0f60274cd3ad 978 void onRadioNotification(void (*callback)(bool param)) {
rgrover1 753:0f60274cd3ad 979 radioNotificationCallback.attach(callback);
rgrover1 753:0f60274cd3ad 980 }
rgrover1 753:0f60274cd3ad 981 template <typename T>
rgrover1 753:0f60274cd3ad 982 void onRadioNotification(T *tptr, void (T::*mptr)(bool)) {
rgrover1 753:0f60274cd3ad 983 radioNotificationCallback.attach(tptr, mptr);
rgrover1 753:0f60274cd3ad 984 }
rgrover1 710:b2e1a2660ec2 985
rgrover1 710:b2e1a2660ec2 986 protected:
rgrover1 710:b2e1a2660ec2 987 Gap() :
rgrover1 710:b2e1a2660ec2 988 _advParams(),
rgrover1 710:b2e1a2660ec2 989 _advPayload(),
rgrover1 710:b2e1a2660ec2 990 _scanningParams(),
rgrover1 710:b2e1a2660ec2 991 _scanResponse(),
rgrover1 710:b2e1a2660ec2 992 state(),
rgrover1 770:079b714e9c1a 993 scanningActive(false),
rgrover1 993:4d62b7967c11 994 timeoutCallbackChain(),
rgrover1 710:b2e1a2660ec2 995 radioNotificationCallback(),
rgrover1 710:b2e1a2660ec2 996 onAdvertisementReport(),
rgrover1 816:2b4f0ef8c06e 997 connectionCallChain(),
rgrover1 710:b2e1a2660ec2 998 disconnectionCallChain() {
rgrover1 710:b2e1a2660ec2 999 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 1000 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 1001 }
rgrover1 710:b2e1a2660ec2 1002
rgrover1 710:b2e1a2660ec2 1003 /* Entry points for the underlying stack to report events back to the user. */
rgrover1 710:b2e1a2660ec2 1004 public:
rgrover1 710:b2e1a2660ec2 1005 void processConnectionEvent(Handle_t handle,
rgrover1 710:b2e1a2660ec2 1006 Role_t role,
rgrover1 710:b2e1a2660ec2 1007 AddressType_t peerAddrType,
rgrover1 710:b2e1a2660ec2 1008 const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 1009 AddressType_t ownAddrType,
rgrover1 710:b2e1a2660ec2 1010 const Address_t ownAddr,
rgrover1 710:b2e1a2660ec2 1011 const ConnectionParams_t *connectionParams) {
rgrover1 710:b2e1a2660ec2 1012 state.connected = 1;
rgrover1 829:9072de50087b 1013 ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
rgrover1 829:9072de50087b 1014 connectionCallChain.call(&callbackParams);
rgrover1 710:b2e1a2660ec2 1015 }
rgrover1 710:b2e1a2660ec2 1016
rgrover1 710:b2e1a2660ec2 1017 void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
rgrover1 710:b2e1a2660ec2 1018 state.connected = 0;
rgrover1 829:9072de50087b 1019 DisconnectionCallbackParams_t callbackParams(handle, reason);
rgrover1 829:9072de50087b 1020 disconnectionCallChain.call(&callbackParams);
rgrover1 710:b2e1a2660ec2 1021 }
rgrover1 710:b2e1a2660ec2 1022
rgrover1 710:b2e1a2660ec2 1023 void processAdvertisementReport(const Address_t peerAddr,
rgrover1 710:b2e1a2660ec2 1024 int8_t rssi,
rgrover1 710:b2e1a2660ec2 1025 bool isScanResponse,
rgrover1 710:b2e1a2660ec2 1026 GapAdvertisingParams::AdvertisingType_t type,
rgrover1 710:b2e1a2660ec2 1027 uint8_t advertisingDataLen,
rgrover1 710:b2e1a2660ec2 1028 const uint8_t *advertisingData) {
rgrover1 710:b2e1a2660ec2 1029 AdvertisementCallbackParams_t params;
rgrover1 710:b2e1a2660ec2 1030 memcpy(params.peerAddr, peerAddr, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 1031 params.rssi = rssi;
rgrover1 710:b2e1a2660ec2 1032 params.isScanResponse = isScanResponse;
rgrover1 710:b2e1a2660ec2 1033 params.type = type;
rgrover1 710:b2e1a2660ec2 1034 params.advertisingDataLen = advertisingDataLen;
rgrover1 710:b2e1a2660ec2 1035 params.advertisingData = advertisingData;
rgrover1 710:b2e1a2660ec2 1036 onAdvertisementReport.call(&params);
rgrover1 710:b2e1a2660ec2 1037 }
rgrover1 710:b2e1a2660ec2 1038
rgrover1 710:b2e1a2660ec2 1039 void processTimeoutEvent(TimeoutSource_t source) {
rgrover1 993:4d62b7967c11 1040 if (timeoutCallbackChain) {
rgrover1 993:4d62b7967c11 1041 timeoutCallbackChain(source);
rgrover1 710:b2e1a2660ec2 1042 }
rgrover1 710:b2e1a2660ec2 1043 }
rgrover1 710:b2e1a2660ec2 1044
rgrover1 710:b2e1a2660ec2 1045 protected:
rgrover1 710:b2e1a2660ec2 1046 GapAdvertisingParams _advParams;
rgrover1 710:b2e1a2660ec2 1047 GapAdvertisingData _advPayload;
rgrover1 710:b2e1a2660ec2 1048 GapScanningParams _scanningParams;
rgrover1 710:b2e1a2660ec2 1049 GapAdvertisingData _scanResponse;
rgrover1 710:b2e1a2660ec2 1050
rgrover1 710:b2e1a2660ec2 1051 GapState_t state;
rgrover1 770:079b714e9c1a 1052 bool scanningActive;
rgrover1 710:b2e1a2660ec2 1053
rgrover1 710:b2e1a2660ec2 1054 protected:
rgrover1 993:4d62b7967c11 1055 TimeoutEventCallbackChain_t timeoutCallbackChain;
rgrover1 993:4d62b7967c11 1056 RadioNotificationEventCallback_t radioNotificationCallback;
rgrover1 993:4d62b7967c11 1057 AdvertisementReportCallback_t onAdvertisementReport;
rgrover1 993:4d62b7967c11 1058 ConnectionEventCallbackChain_t connectionCallChain;
rgrover1 993:4d62b7967c11 1059 DisconnectionEventCallbackChain_t disconnectionCallChain;
rgrover1 710:b2e1a2660ec2 1060
rgrover1 710:b2e1a2660ec2 1061 private:
rgrover1 993:4d62b7967c11 1062 /* Disallow copy and assignment. */
rgrover1 710:b2e1a2660ec2 1063 Gap(const Gap &);
rgrover1 710:b2e1a2660ec2 1064 Gap& operator=(const Gap &);
rgrover1 710:b2e1a2660ec2 1065 };
rgrover1 710:b2e1a2660ec2 1066
rgrover1 710:b2e1a2660ec2 1067 #endif // ifndef __GAP_H__