Amit Gandhi
Nordic stack and drivers for the mbed BLE API
Fork of
nRF51822
by 
Nordic Semiconductor
Revision 639:5aeed2c29513, committed 2017-11-10
- Comitter:
- amithy
- Date:
- Fri Nov 10 01:00:06 2017 +0000
- Parent:
- 638:c90ae1400bf2
- Commit message:
- for testing export
Changed in this revision
| TARGET_MCU_NRF51822/sdk/source/libraries/timer/app_timer.h | Show diff for this revision Revisions of this file |
diff -r c90ae1400bf2 -r 5aeed2c29513 TARGET_MCU_NRF51822/sdk/source/libraries/timer/app_timer.h
--- a/TARGET_MCU_NRF51822/sdk/source/libraries/timer/app_timer.h Wed Sep 14 14:39:43 2016 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,297 +0,0 @@
-/*
- * Copyright (c) Nordic Semiconductor ASA
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice, this
- * list of conditions and the following disclaimer in the documentation and/or
- * other materials provided with the distribution.
- *
- * 3. Neither the name of Nordic Semiconductor ASA nor the names of other
- * contributors to this software may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-/** @file
- *
- * @defgroup app_timer Application Timer
- * @{
- * @ingroup app_common
- *
- * @brief Application timer functionality.
- *
- * @details This module enables the application to create multiple timer instances based on the RTC1
- * peripheral. Checking for time-outs and invokation of user time-out handlers is performed
- * in the RTC1 interrupt handler. List handling is done using a software interrupt (SWI0).
- * Both interrupt handlers are running in APP_LOW priority level.
- *
- * @details When calling app_timer_start() or app_timer_stop(), the timer operation is just queued,
- * and the software interrupt is triggered. The actual timer start/stop operation is
- * executed by the SWI0 interrupt handler. Since the SWI0 interrupt is running in APP_LOW,
- * if the application code calling the timer function is running in APP_LOW or APP_HIGH,
- * the timer operation will not be performed until the application handler has returned.
- * This will be the case, for example, when stopping a timer from a time-out handler when not using
- * the scheduler.
- *
- * @details Use the USE_SCHEDULER parameter of the APP_TIMER_INIT() macro to select if the
- * @ref app_scheduler should be used or not. Even if the scheduler is
- * not used, app_timer.h will include app_scheduler.h, so when
- * compiling, app_scheduler.h must be available in one of the compiler include paths.
- */
-
-#ifndef APP_TIMER_H__
-#define APP_TIMER_H__
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <stdio.h>
-#include "app_error.h"
-#include "app_util.h"
-#include "compiler_abstraction.h"
-
-#define APP_TIMER_CLOCK_FREQ 32768 /**< Clock frequency of the RTC timer used to implement the app timer module. */
-#define APP_TIMER_MIN_TIMEOUT_TICKS 5 /**< Minimum value of the timeout_ticks parameter of app_timer_start(). */
-
-#define APP_TIMER_NODE_SIZE 32 /**< Size of app_timer.timer_node_t (used to allocate data). */
-#define APP_TIMER_USER_OP_SIZE 24 /**< Size of app_timer.timer_user_op_t (only for use inside APP_TIMER_BUF_SIZE()). */
-#define APP_TIMER_USER_SIZE 8 /**< Size of app_timer.timer_user_t (only for use inside APP_TIMER_BUF_SIZE()). */
-#define APP_TIMER_INT_LEVELS 3 /**< Number of interrupt levels from where timer operations may be initiated (only for use inside APP_TIMER_BUF_SIZE()). */
-
-/**@brief Compute number of bytes required to hold the application timer data structures.
- *
- * @param[in] OP_QUEUE_SIZE Size of queues holding timer operations that are pending execution.
- * Note that due to the queue implementation, this size must be one more
- * than the size that is actually needed.
- *
- * @return Required application timer buffer size (in bytes).
- */
-#define APP_TIMER_BUF_SIZE(OP_QUEUE_SIZE) \
- ( \
- ( \
- APP_TIMER_INT_LEVELS \
- * \
- (APP_TIMER_USER_SIZE + ((OP_QUEUE_SIZE) + 1) * APP_TIMER_USER_OP_SIZE) \
- ) \
- )
-
-/**@brief Convert milliseconds to timer ticks.
- *
- * This macro uses 64-bit integer arithmetic, but as long as the macro parameters are
- * constants (i.e. defines), the computation will be done by the preprocessor.
- *
- * When using this macro, ensure that the
- * values provided as input result in an output value that is supported by the
- * @ref app_timer_start function. For example, when the ticks for 1 ms is needed, the
- * maximum possible value of PRESCALER must be 6, when @ref APP_TIMER_CLOCK_FREQ is 32768.
- * This will result in a ticks value as 5. Any higher value for PRESCALER will result in a
- * ticks value that is not supported by this module.
- *
- * @param[in] MS Milliseconds.
- * @param[in] PRESCALER Value of the RTC1 PRESCALER register (must be the same value that was
- * passed to APP_TIMER_INIT()).
- *
- * @return Number of timer ticks.
- */
-#define APP_TIMER_TICKS(MS, PRESCALER)\
- ((uint32_t)ROUNDED_DIV((MS) * (uint64_t)APP_TIMER_CLOCK_FREQ, ((PRESCALER) + 1) * 1000))
-
-typedef struct app_timer_t { uint32_t data[CEIL_DIV(APP_TIMER_NODE_SIZE, sizeof(uint32_t))]; } app_timer_t;
-
-/**@brief Timer ID type.
- * Never declare a variable of this type, but use the macro @ref APP_TIMER_DEF instead.*/
-typedef app_timer_t * app_timer_id_t;
-
-/**
- * @brief Create a timer identifier and statically allocate memory for the timer.
- *
- * @param timer_id Name of the timer identifier variable that will be used to control the timer.
- */
-#define APP_TIMER_DEF(timer_id) \
- static app_timer_t timer_id##_data = { {0} }; \
- static const app_timer_id_t timer_id = &timer_id##_data
-
-
-/**@brief Application time-out handler type. */
-typedef void (*app_timer_timeout_handler_t)(void * p_context);
-
-/**@brief Type of function for passing events from the timer module to the scheduler. */
-typedef uint32_t (*app_timer_evt_schedule_func_t) (app_timer_timeout_handler_t timeout_handler,
- void * p_context);
-
-/**@brief Timer modes. */
-typedef enum
-{
- APP_TIMER_MODE_SINGLE_SHOT, /**< The timer will expire only once. */
- APP_TIMER_MODE_REPEATED /**< The timer will restart each time it expires. */
-} app_timer_mode_t;
-
-/**@brief Initialize the application timer module.
- *
- * @details This macro handles dimensioning and allocation of the memory buffer required by the timer,
- * making sure that the buffer is correctly aligned. It will also connect the timer module
- * to the scheduler (if specified).
- *
- * @note This module assumes that the LFCLK is already running. If it is not, the module will
- * be non-functional, since the RTC will not run. If you do not use a SoftDevice, you
- * must start the LFCLK manually. See the rtc_example's lfclk_config() function
- * for an example of how to do this. If you use a SoftDevice, the LFCLK is started on
- * SoftDevice init.
- *
- *
- * @param[in] PRESCALER Value of the RTC1 PRESCALER register. This will decide the
- * timer tick rate. Set to 0 for no prescaling.
- * @param[in] OP_QUEUES_SIZE Size of queues holding timer operations that are pending execution.
- * @param[in] SCHEDULER_FUNC Pointer to scheduler event handler
- *
- * @note Since this macro allocates a buffer, it must only be called once (it is OK to call it
- * several times as long as it is from the same location, for example, to do a re-initialization).
- */
-/*lint -emacro(506, APP_TIMER_INIT) */ /* Suppress "Constant value Boolean */
-#define APP_TIMER_INIT(PRESCALER, OP_QUEUES_SIZE, SCHEDULER_FUNC) \
- do \
- { \
- static uint32_t APP_TIMER_BUF[CEIL_DIV(APP_TIMER_BUF_SIZE((OP_QUEUES_SIZE) + 1), \
- sizeof(uint32_t))]; \
- uint32_t ERR_CODE = app_timer_init((PRESCALER), \
- (OP_QUEUES_SIZE) + 1, \
- APP_TIMER_BUF, \
- SCHEDULER_FUNC); \
- APP_ERROR_CHECK(ERR_CODE); \
- } while (0)
-
-
-
-/**@brief Function for initializing the timer module.
- *
- * Normally, initialization should be done using the APP_TIMER_INIT() macro, because that macro will both
- * allocate the buffers needed by the timer module (including aligning the buffers correctly)
- * and take care of connecting the timer module to the scheduler (if specified).
- *
- * @param[in] prescaler Value of the RTC1 PRESCALER register. Set to 0 for no prescaling.
- * @param[in] op_queues_size Size of queues holding timer operations that are pending
- * execution. Note that due to the queue implementation, this size must
- * be one more than the size that is actually needed.
- * @param[in] p_buffer Pointer to memory buffer for internal use in the app_timer
- * module. The size of the buffer can be computed using the
- * APP_TIMER_BUF_SIZE() macro. The buffer must be aligned to a
- * 4 byte boundary.
- * @param[in] evt_schedule_func Function for passing time-out events to the scheduler. Point to
- * app_timer_evt_schedule() to connect to the scheduler. Set to NULL
- * to make the timer module call the time-out handler directly from
- * the timer interrupt handler.
- *
- * @retval NRF_SUCCESS If the module was initialized successfully.
- * @retval NRF_ERROR_INVALID_PARAM If a parameter was invalid (buffer not aligned to a 4 byte
- * boundary or NULL).
- */
-uint32_t app_timer_init(uint32_t prescaler,
- uint8_t op_queues_size,
- void * p_buffer,
- app_timer_evt_schedule_func_t evt_schedule_func);
-
-/**@brief Function for creating a timer instance.
- *
- * @param[in] p_timer_id Pointer to timer identifier.
- * @param[in] mode Timer mode.
- * @param[in] timeout_handler Function to be executed when the timer expires.
- *
- * @retval NRF_SUCCESS If the timer was successfully created.
- * @retval NRF_ERROR_INVALID_PARAM If a parameter was invalid.
- * @retval NRF_ERROR_INVALID_STATE If the application timer module has not been initialized or
- * the timer is running.
- *
- * @note This function does the timer allocation in the caller's context. It is also not protected
- * by a critical region. Therefore care must be taken not to call it from several interrupt
- * levels simultaneously.
- * @note The function can be called again on the timer instance and will re-initialize the instance if
- * the timer is not running.
- * @attention The FreeRTOS and RTX app_timer implementation does not allow app_timer_create to
- * be called on the previously initialized instance.
- */
-uint32_t app_timer_create(app_timer_id_t const * p_timer_id,
- app_timer_mode_t mode,
- app_timer_timeout_handler_t timeout_handler);
-
-/**@brief Function for starting a timer.
- *
- * @param[in] timer_id Timer identifier.
- * @param[in] timeout_ticks Number of ticks (of RTC1, including prescaling) to time-out event
- * (minimum 5 ticks).
- * @param[in] p_context General purpose pointer. Will be passed to the time-out handler when
- * the timer expires.
- *
- * @retval NRF_SUCCESS If the timer was successfully started.
- * @retval NRF_ERROR_INVALID_PARAM If a parameter was invalid.
- * @retval NRF_ERROR_INVALID_STATE If the application timer module has not been initialized or the timer
- * has not been created.
- * @retval NRF_ERROR_NO_MEM If the timer operations queue was full.
- *
- * @note The minimum timeout_ticks value is 5.
- * @note For multiple active timers, time-outs occurring in close proximity to each other (in the
- * range of 1 to 3 ticks) will have a positive jitter of maximum 3 ticks.
- * @note When calling this method on a timer that is already running, the second start operation
- * is ignored.
- */
-uint32_t app_timer_start(app_timer_id_t timer_id, uint32_t timeout_ticks, void * p_context);
-
-/**@brief Function for stopping the specified timer.
- *
- * @param[in] timer_id Timer identifier.
- *
- * @retval NRF_SUCCESS If the timer was successfully stopped.
- * @retval NRF_ERROR_INVALID_PARAM If a parameter was invalid.
- * @retval NRF_ERROR_INVALID_STATE If the application timer module has not been initialized or the timer
- * has not been created.
- * @retval NRF_ERROR_NO_MEM If the timer operations queue was full.
- */
-uint32_t app_timer_stop(app_timer_id_t timer_id);
-
-/**@brief Function for stopping all running timers.
- *
- * @retval NRF_SUCCESS If all timers were successfully stopped.
- * @retval NRF_ERROR_INVALID_STATE If the application timer module has not been initialized.
- * @retval NRF_ERROR_NO_MEM If the timer operations queue was full.
- */
-uint32_t app_timer_stop_all(void);
-
-/**@brief Function for returning the current value of the RTC1 counter.
- *
- * @param[out] p_ticks Current value of the RTC1 counter.
- *
- * @retval NRF_SUCCESS If the counter was successfully read.
- */
-uint32_t app_timer_cnt_get(uint32_t * p_ticks);
-
-/**@brief Function for computing the difference between two RTC1 counter values.
- *
- * @param[in] ticks_to Value returned by app_timer_cnt_get().
- * @param[in] ticks_from Value returned by app_timer_cnt_get().
- * @param[out] p_ticks_diff Number of ticks from ticks_from to ticks_to.
- *
- * @retval NRF_SUCCESS If the counter difference was successfully computed.
- */
-uint32_t app_timer_cnt_diff_compute(uint32_t ticks_to,
- uint32_t ticks_from,
- uint32_t * p_ticks_diff);
-
-#endif // APP_TIMER_H__
-
-/** @} */