Nordic stack and drivers for the mbed BLE API
Dependents: Sensen-classic-v8-IAQ_copy_4
Fork of nRF51822 by
Diff: TARGET_MCU_NRF51822/sdk/source/ble/common/ble_conn_params.cpp
- Revision:
- 638:c90ae1400bf2
diff -r f7faad332abc -r c90ae1400bf2 TARGET_MCU_NRF51822/sdk/source/ble/common/ble_conn_params.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MCU_NRF51822/sdk/source/ble/common/ble_conn_params.cpp Wed Sep 14 14:39:43 2016 +0100 @@ -0,0 +1,386 @@ +/* + * Copyright (c) Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include "ble_conn_params.h" +#include <stdlib.h> +#include "nordic_common.h" +#include "ble_hci.h" +#include "ble_srv_common.h" +#include "app_util.h" + +#ifdef USE_APP_TIMER +#include "app_timer.h" +#else + #ifdef YOTTA_CFG_MBED_OS + #include "mbed-drivers/mbed.h" + #else + #include "mbed.h" + #endif +#endif + +static ble_conn_params_init_t m_conn_params_config; /**< Configuration as specified by the application. */ +static ble_gap_conn_params_t m_preferred_conn_params; /**< Connection parameters preferred by the application. */ +static uint8_t m_update_count; /**< Number of Connection Parameter Update messages that has currently been sent. */ +static uint16_t m_conn_handle; /**< Current connection handle. */ +static ble_gap_conn_params_t m_current_conn_params; /**< Connection parameters received in the most recent Connect event. */ +#ifdef USE_APP_TIMER +static app_timer_id_t m_conn_params_timer_id; /**< Connection parameters timer. */ +#else +static Ticker m_conn_params_timer; +#endif + +static bool m_change_param = false; + +static bool is_conn_params_ok(ble_gap_conn_params_t * p_conn_params) +{ + // Check if interval is within the acceptable range. + // NOTE: Using max_conn_interval in the received event data because this contains + // the client's connection interval. + if ( + (p_conn_params->max_conn_interval >= m_preferred_conn_params.min_conn_interval) + && + (p_conn_params->max_conn_interval <= m_preferred_conn_params.max_conn_interval) + ) + { + return true; + } + else + { + return false; + } +} + + +#ifdef USE_APP_TIMER +static void update_timeout_handler(void * p_context) +{ + UNUSED_PARAMETER(p_context); + +#else /* #if !USE_APP_TIMER */ +static void update_timeout_handler(void) +{ + m_conn_params_timer.detach(); /* this is supposed to be a single-shot timer callback */ +#endif /* #if !USE_APP_TIMER */ + if (m_conn_handle != BLE_CONN_HANDLE_INVALID) + { + // Check if we have reached the maximum number of attempts + m_update_count++; + if (m_update_count <= m_conn_params_config.max_conn_params_update_count) + { + uint32_t err_code; + + // Parameters are not ok, send connection parameters update request. + err_code = sd_ble_gap_conn_param_update(m_conn_handle, &m_preferred_conn_params); + if ((err_code != NRF_SUCCESS) && (m_conn_params_config.error_handler != NULL)) + { + m_conn_params_config.error_handler(err_code); + } + } + else + { + m_update_count = 0; + + // Negotiation failed, disconnect automatically if this has been configured + if (m_conn_params_config.disconnect_on_fail) + { + uint32_t err_code; + + err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE); + if ((err_code != NRF_SUCCESS) && (m_conn_params_config.error_handler != NULL)) + { + m_conn_params_config.error_handler(err_code); + } + } + + // Notify the application that the procedure has failed + if (m_conn_params_config.evt_handler != NULL) + { + ble_conn_params_evt_t evt; + + evt.evt_type = BLE_CONN_PARAMS_EVT_FAILED; + m_conn_params_config.evt_handler(&evt); + } + } + } +} + + +uint32_t ble_conn_params_init(const ble_conn_params_init_t * p_init) +{ + uint32_t err_code; + + m_conn_params_config = *p_init; + m_change_param = false; + if (p_init->p_conn_params != NULL) + { + m_preferred_conn_params = *p_init->p_conn_params; + + // Set the connection params in stack + err_code = sd_ble_gap_ppcp_set(&m_preferred_conn_params); + if (err_code != NRF_SUCCESS) + { + return err_code; + } + } + else + { + // Fetch the connection params from stack + err_code = sd_ble_gap_ppcp_get(&m_preferred_conn_params); + if (err_code != NRF_SUCCESS) + { + return err_code; + } + } + + m_conn_handle = BLE_CONN_HANDLE_INVALID; + m_update_count = 0; + +#ifdef USE_APP_TIMER + return app_timer_create(&m_conn_params_timer_id, + APP_TIMER_MODE_SINGLE_SHOT, + update_timeout_handler); +#else + return NRF_SUCCESS; +#endif +} + + +uint32_t ble_conn_params_stop(void) +{ +#ifdef USE_APP_TIMER + return app_timer_stop(m_conn_params_timer_id); +#else /* #if !USE_APP_TIMER */ + m_conn_params_timer.detach(); + return NRF_SUCCESS; +#endif /* #if !USE_APP_TIMER */ +} + + +static void conn_params_negotiation(void) +{ + // Start negotiation if the received connection parameters are not acceptable + if (!is_conn_params_ok(&m_current_conn_params)) + { +#ifdef USE_APP_TIMER + uint32_t err_code; +#endif + uint32_t timeout_ticks; + + if (m_change_param) + { + // Notify the application that the procedure has failed + if (m_conn_params_config.evt_handler != NULL) + { + ble_conn_params_evt_t evt; + + evt.evt_type = BLE_CONN_PARAMS_EVT_FAILED; + m_conn_params_config.evt_handler(&evt); + } + } + else + { + if (m_update_count == 0) + { + // First connection parameter update + timeout_ticks = m_conn_params_config.first_conn_params_update_delay; + } + else + { + timeout_ticks = m_conn_params_config.next_conn_params_update_delay; + } + +#ifdef USE_APP_TIMER + err_code = app_timer_start(m_conn_params_timer_id, timeout_ticks, NULL); + if ((err_code != NRF_SUCCESS) && (m_conn_params_config.error_handler != NULL)) + { + m_conn_params_config.error_handler(err_code); + } +#else + m_conn_params_timer.attach(update_timeout_handler, timeout_ticks / 32768); +#endif + } + } + else + { + // Notify the application that the procedure has succeded + if (m_conn_params_config.evt_handler != NULL) + { + ble_conn_params_evt_t evt; + + evt.evt_type = BLE_CONN_PARAMS_EVT_SUCCEEDED; + m_conn_params_config.evt_handler(&evt); + } + } + m_change_param = false; +} + + +static void on_connect(ble_evt_t * p_ble_evt) +{ + // Save connection parameters + m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle; + m_current_conn_params = p_ble_evt->evt.gap_evt.params.connected.conn_params; + m_update_count = 0; // Connection parameter negotiation should re-start every connection + + // Check if we shall handle negotiation on connect + if (m_conn_params_config.start_on_notify_cccd_handle == BLE_GATT_HANDLE_INVALID) + { + conn_params_negotiation(); + } +} + + +static void on_disconnect(ble_evt_t * p_ble_evt) +{ +#ifdef USE_APP_TIMER + uint32_t err_code; +#endif + + m_conn_handle = BLE_CONN_HANDLE_INVALID; + + // Stop timer if running + m_update_count = 0; // Connection parameters updates should happen during every connection + +#ifdef USE_APP_TIMER + err_code = app_timer_stop(m_conn_params_timer_id); + if ((err_code != NRF_SUCCESS) && (m_conn_params_config.error_handler != NULL)) + { + m_conn_params_config.error_handler(err_code); + } +#else + m_conn_params_timer.detach(); +#endif +} + + +static void on_write(ble_evt_t * p_ble_evt) +{ + ble_gatts_evt_write_t * p_evt_write = &p_ble_evt->evt.gatts_evt.params.write; + + // Check if this the correct CCCD + if ( + (p_evt_write->handle == m_conn_params_config.start_on_notify_cccd_handle) + && + (p_evt_write->len == 2) + ) + { + // Check if this is a 'start notification' + if (ble_srv_is_notification_enabled(p_evt_write->data)) + { + // Do connection parameter negotiation if necessary + conn_params_negotiation(); + } + else + { +#ifdef USE_APP_TIMER + uint32_t err_code; + + // Stop timer if running + err_code = app_timer_stop(m_conn_params_timer_id); + if ((err_code != NRF_SUCCESS) && (m_conn_params_config.error_handler != NULL)) + { + m_conn_params_config.error_handler(err_code); + } +#else /* #if !USE_APP_TIMER */ + m_conn_params_timer.detach(); +#endif /* #if !USE_APP_TIMER */ + } + } +} + + +static void on_conn_params_update(ble_evt_t * p_ble_evt) +{ + // Copy the parameters + m_current_conn_params = p_ble_evt->evt.gap_evt.params.conn_param_update.conn_params; + + conn_params_negotiation(); +} + + +void ble_conn_params_on_ble_evt(ble_evt_t * p_ble_evt) +{ + switch (p_ble_evt->header.evt_id) + { + case BLE_GAP_EVT_CONNECTED: + on_connect(p_ble_evt); + break; + + case BLE_GAP_EVT_DISCONNECTED: + on_disconnect(p_ble_evt); + break; + + case BLE_GATTS_EVT_WRITE: + on_write(p_ble_evt); + break; + + case BLE_GAP_EVT_CONN_PARAM_UPDATE: + on_conn_params_update(p_ble_evt); + break; + + default: + // No implementation needed. + break; + } +} + + +uint32_t ble_conn_params_change_conn_params(ble_gap_conn_params_t * new_params) +{ + uint32_t err_code; + + m_preferred_conn_params = *new_params; + // Set the connection params in stack + err_code = sd_ble_gap_ppcp_set(&m_preferred_conn_params); + if (err_code == NRF_SUCCESS) + { + if (!is_conn_params_ok(&m_current_conn_params)) + { + m_change_param = true; + err_code = sd_ble_gap_conn_param_update(m_conn_handle, &m_preferred_conn_params); + m_update_count = 1; + } + else + { + // Notify the application that the procedure has succeded + if (m_conn_params_config.evt_handler != NULL) + { + ble_conn_params_evt_t evt; + + evt.evt_type = BLE_CONN_PARAMS_EVT_SUCCEEDED; + m_conn_params_config.evt_handler(&evt); + } + err_code = NRF_SUCCESS; + } + } + return err_code; +}