Nordic stack and drivers for the mbed BLE API
Dependents: Sensen-classic-v8-IAQ_copy_4
Fork of nRF51822 by
TARGET_MCU_NRF51822/sdk/source/softdevice/s130/headers/ble_gatts.h
- Committer:
- Vincent Coubard
- Date:
- 2016-09-14
- Revision:
- 638:c90ae1400bf2
File content as of revision 638:c90ae1400bf2:
/* * Copyright (c) Nordic Semiconductor ASA * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright notice, this * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of other * contributors to this software may be used to endorse or promote products * derived from this software without specific prior written permission. * * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /** @addtogroup BLE_GATTS Generic Attribute Profile (GATT) Server @{ @brief Definitions and prototypes for the GATTS interface. */ #ifndef BLE_GATTS_H__ #define BLE_GATTS_H__ #include "ble_types.h" #include "ble_ranges.h" #include "ble_l2cap.h" #include "ble_gap.h" #include "ble_gatt.h" #include "nrf_svc.h" /** @addtogroup BLE_GATTS_ENUMERATIONS Enumerations * @{ */ /** * @brief GATTS API SVC numbers. */ enum BLE_GATTS_SVCS { SD_BLE_GATTS_SERVICE_ADD = BLE_GATTS_SVC_BASE, /**< Add a service. */ SD_BLE_GATTS_INCLUDE_ADD, /**< Add an included service. */ SD_BLE_GATTS_CHARACTERISTIC_ADD, /**< Add a characteristic. */ SD_BLE_GATTS_DESCRIPTOR_ADD, /**< Add a generic attribute. */ SD_BLE_GATTS_VALUE_SET, /**< Set an attribute value. */ SD_BLE_GATTS_VALUE_GET, /**< Get an attribute value. */ SD_BLE_GATTS_HVX, /**< Handle Value Notification or Indication. */ SD_BLE_GATTS_SERVICE_CHANGED, /**< Perform a Service Changed Indication to one or more peers. */ SD_BLE_GATTS_RW_AUTHORIZE_REPLY, /**< Reply to an authorization request for a read or write operation on one or more attributes. */ SD_BLE_GATTS_SYS_ATTR_SET, /**< Set the persistent system attributes for a connection. */ SD_BLE_GATTS_SYS_ATTR_GET, /**< Retrieve the persistent system attributes. */ }; /** * @brief GATT Server Event IDs. */ enum BLE_GATTS_EVTS { BLE_GATTS_EVT_WRITE = BLE_GATTS_EVT_BASE, /**< Write operation performed. @ref ble_gatts_evt_write_t */ BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST, /**< Read/Write Authorization request.@ref ble_gatts_evt_rw_authorize_request_t */ BLE_GATTS_EVT_SYS_ATTR_MISSING, /**< A persistent system attribute access is pending, awaiting a sd_ble_gatts_sys_attr_set(). @ref ble_gatts_evt_sys_attr_missing_t */ BLE_GATTS_EVT_HVC, /**< Handle Value Confirmation. @ref ble_gatts_evt_hvc_t */ BLE_GATTS_EVT_SC_CONFIRM, /**< Service Changed Confirmation. No additional event structure applies. */ BLE_GATTS_EVT_TIMEOUT /**< Timeout. @ref ble_gatts_evt_timeout_t */ }; /** @} */ /** @addtogroup BLE_GATTS_DEFINES Defines * @{ */ /** @defgroup BLE_ERRORS_GATTS SVC return values specific to GATTS * @{ */ #define BLE_ERROR_GATTS_INVALID_ATTR_TYPE (NRF_GATTS_ERR_BASE + 0x000) /**< Invalid attribute type. */ #define BLE_ERROR_GATTS_SYS_ATTR_MISSING (NRF_GATTS_ERR_BASE + 0x001) /**< System Attributes missing. */ /** @} */ /** @defgroup BLE_GATTS_ATTR_LENS_MAX Maximum attribute lengths * @{ */ #define BLE_GATTS_FIX_ATTR_LEN_MAX (510) /**< Maximum length for fixed length Attribute Values. */ #define BLE_GATTS_VAR_ATTR_LEN_MAX (512) /**< Maximum length for variable length Attribute Values. */ /** @} */ /** @defgroup BLE_GATTS_SRVC_TYPES GATT Server Service Types * @{ */ #define BLE_GATTS_SRVC_TYPE_INVALID 0x00 /**< Invalid Service Type. */ #define BLE_GATTS_SRVC_TYPE_PRIMARY 0x01 /**< Primary Service. */ #define BLE_GATTS_SRVC_TYPE_SECONDARY 0x02 /**< Secondary Type. */ /** @} */ /** @defgroup BLE_GATTS_ATTR_TYPES GATT Server Attribute Types * @{ */ #define BLE_GATTS_ATTR_TYPE_INVALID 0x00 /**< Invalid Attribute Type. */ #define BLE_GATTS_ATTR_TYPE_PRIM_SRVC_DECL 0x01 /**< Primary Service Declaration. */ #define BLE_GATTS_ATTR_TYPE_SEC_SRVC_DECL 0x02 /**< Secondary Service Declaration. */ #define BLE_GATTS_ATTR_TYPE_INC_DECL 0x03 /**< Include Declaration. */ #define BLE_GATTS_ATTR_TYPE_CHAR_DECL 0x04 /**< Characteristic Declaration. */ #define BLE_GATTS_ATTR_TYPE_CHAR_VAL 0x05 /**< Characteristic Value. */ #define BLE_GATTS_ATTR_TYPE_DESC 0x06 /**< Descriptor. */ #define BLE_GATTS_ATTR_TYPE_OTHER 0x07 /**< Other, non-GATT specific type. */ /** @} */ /** @defgroup BLE_GATTS_OPS GATT Server Operations * @{ */ #define BLE_GATTS_OP_INVALID 0x00 /**< Invalid Operation. */ #define BLE_GATTS_OP_WRITE_REQ 0x01 /**< Write Request. */ #define BLE_GATTS_OP_WRITE_CMD 0x02 /**< Write Command. */ #define BLE_GATTS_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */ #define BLE_GATTS_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */ #define BLE_GATTS_OP_EXEC_WRITE_REQ_CANCEL 0x05 /**< Execute Write Request: Cancel all prepared writes. */ #define BLE_GATTS_OP_EXEC_WRITE_REQ_NOW 0x06 /**< Execute Write Request: Immediately execute all prepared writes. */ /** @} */ /** @defgroup BLE_GATTS_VLOCS GATT Value Locations * @{ */ #define BLE_GATTS_VLOC_INVALID 0x00 /**< Invalid Location. */ #define BLE_GATTS_VLOC_STACK 0x01 /**< Attribute Value is located in stack memory, no user memory is required. */ #define BLE_GATTS_VLOC_USER 0x02 /**< Attribute Value is located in user memory. This requires the user to maintain a valid buffer through the lifetime of the attribute, since the stack will read and write directly to the memory using the pointer provided in the APIs. There are no alignment requirements for the buffer. */ /** @} */ /** @defgroup BLE_GATTS_AUTHORIZE_TYPES GATT Server Authorization Types * @{ */ #define BLE_GATTS_AUTHORIZE_TYPE_INVALID 0x00 /**< Invalid Type. */ #define BLE_GATTS_AUTHORIZE_TYPE_READ 0x01 /**< Authorize a Read Operation. */ #define BLE_GATTS_AUTHORIZE_TYPE_WRITE 0x02 /**< Authorize a Write Request Operation. */ /** @} */ /** @defgroup BLE_GATTS_SYS_ATTR_FLAGS System Attribute Flags * @{ */ #define BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS (1 << 0) /**< Restrict system attributes to system services only. */ #define BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS (1 << 1) /**< Restrict system attributes to user services only. */ /** @} */ /** @defgroup BLE_GATTS_ATTR_TAB_SIZE Attribute Table size * @{ */ #define BLE_GATTS_ATTR_TAB_SIZE_MIN 216 /**< Minimum Attribute Table size */ #define BLE_GATTS_ATTR_TAB_SIZE_DEFAULT 0x0000 /**< Default Attribute Table size (0x600 bytes for this version of the SoftDevice). */ /** @} */ /** @} */ /** @addtogroup BLE_GATTS_STRUCTURES Structures * @{ */ /** * @brief BLE GATTS init options */ typedef struct { uint8_t service_changed:1; /**< Include the Service Changed characteristic in the Attribute Table. */ uint32_t attr_tab_size; /**< Attribute Table size in bytes. The size must be a multiple of 4. @ref BLE_GATTS_ATTR_TAB_SIZE_DEFAULT is used to set the default size. */ } ble_gatts_enable_params_t; /**@brief Attribute metadata. */ typedef struct { ble_gap_conn_sec_mode_t read_perm; /**< Read permissions. */ ble_gap_conn_sec_mode_t write_perm; /**< Write permissions. */ uint8_t vlen :1; /**< Variable length attribute. */ uint8_t vloc :2; /**< Value location, see @ref BLE_GATTS_VLOCS.*/ uint8_t rd_auth :1; /**< Read authorization and value will be requested from the application on every read operation. */ uint8_t wr_auth :1; /**< Write authorization will be requested from the application on every Write Request operation (but not Write Command). */ } ble_gatts_attr_md_t; /**@brief GATT Attribute. */ typedef struct { ble_uuid_t *p_uuid; /**< Pointer to the attribute UUID. */ ble_gatts_attr_md_t *p_attr_md; /**< Pointer to the attribute metadata structure. */ uint16_t init_len; /**< Initial attribute value length in bytes. */ uint16_t init_offs; /**< Initial attribute value offset in bytes. If different from zero, the first init_offs bytes of the attribute value will be left uninitialized. */ uint16_t max_len; /**< Maximum attribute value length in bytes, see @ref BLE_GATTS_ATTR_LENS_MAX for maximum values. */ uint8_t* p_value; /**< Pointer to the attribute data. Please note that if the @ref BLE_GATTS_VLOC_USER value location is selected in the attribute metadata, this will have to point to a buffer that remains valid through the lifetime of the attribute. This excludes usage of automatic variables that may go out of scope or any other temporary location. The stack may access that memory directly without the application's knowledge. For writable characteristics, this value must not be a location in flash memory.*/ } ble_gatts_attr_t; /**@brief GATT Attribute Value. */ typedef struct { uint16_t len; /**< Length in bytes to be written or read. Length in bytes written or read after successful return.*/ uint16_t offset; /**< Attribute value offset. */ uint8_t *p_value; /**< Pointer to where value is stored or will be stored. If value is stored in user memory, only the attribute length is updated when p_value == NULL. Set to NULL when reading to obtain the complete length of the attribute value */ } ble_gatts_value_t; /**@brief GATT Attribute Context. */ typedef struct { ble_uuid_t srvc_uuid; /**< Service UUID. */ ble_uuid_t char_uuid; /**< Characteristic UUID if applicable (BLE_UUID_TYPE_UNKNOWN otherwise). */ ble_uuid_t desc_uuid; /**< Descriptor UUID if applicable (BLE_UUID_TYPE_UNKNOWN otherwise). */ uint16_t srvc_handle; /**< Service Handle. */ uint16_t value_handle; /**< Characteristic Value Handle if applicable (BLE_GATT_HANDLE_INVALID otherwise). */ uint8_t type; /**< Attribute Type, see @ref BLE_GATTS_ATTR_TYPES. */ } ble_gatts_attr_context_t; /**@brief GATT Characteristic Presentation Format. */ typedef struct { uint8_t format; /**< Format of the value, see @ref BLE_GATT_CPF_FORMATS. */ int8_t exponent; /**< Exponent for integer data types. */ uint16_t unit; /**< Unit from Bluetooth Assigned Numbers. */ uint8_t name_space; /**< Namespace from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */ uint16_t desc; /**< Namespace description from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */ } ble_gatts_char_pf_t; /**@brief GATT Characteristic metadata. */ typedef struct { ble_gatt_char_props_t char_props; /**< Characteristic Properties. */ ble_gatt_char_ext_props_t char_ext_props; /**< Characteristic Extended Properties. */ uint8_t *p_char_user_desc; /**< Pointer to a UTF-8 encoded string (non-NULL terminated), NULL if the descriptor is not required. */ uint16_t char_user_desc_max_size; /**< The maximum size in bytes of the user description descriptor. */ uint16_t char_user_desc_size; /**< The size of the user description, must be smaller or equal to char_user_desc_max_size. */ ble_gatts_char_pf_t* p_char_pf; /**< Pointer to a presentation format structure or NULL if the CPF descriptor is not required. */ ble_gatts_attr_md_t* p_user_desc_md; /**< Attribute metadata for the User Description descriptor, or NULL for default values. */ ble_gatts_attr_md_t* p_cccd_md; /**< Attribute metadata for the Client Characteristic Configuration Descriptor, or NULL for default values. */ ble_gatts_attr_md_t* p_sccd_md; /**< Attribute metadata for the Server Characteristic Configuration Descriptor, or NULL for default values. */ } ble_gatts_char_md_t; /**@brief GATT Characteristic Definition Handles. */ typedef struct { uint16_t value_handle; /**< Handle to the characteristic value. */ uint16_t user_desc_handle; /**< Handle to the User Description descriptor, or @ref BLE_GATT_HANDLE_INVALID if not present. */ uint16_t cccd_handle; /**< Handle to the Client Characteristic Configuration Descriptor, or @ref BLE_GATT_HANDLE_INVALID if not present. */ uint16_t sccd_handle; /**< Handle to the Server Characteristic Configuration Descriptor, or @ref BLE_GATT_HANDLE_INVALID if not present. */ } ble_gatts_char_handles_t; /**@brief GATT HVx parameters. */ typedef struct { uint16_t handle; /**< Characteristic Value Handle. */ uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */ uint16_t offset; /**< Offset within the attribute value. */ uint16_t *p_len; /**< Length in bytes to be written, length in bytes written after successful return. */ uint8_t *p_data; /**< Actual data content, use NULL to use the current attribute value. */ } ble_gatts_hvx_params_t; /**@brief GATT Read Authorization parameters. */ typedef struct { uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */ uint8_t update : 1; /**< If set, data supplied in p_data will be used in the ATT response. */ uint16_t offset; /**< Offset of the attribute value being updated. */ uint16_t len; /**< Length in bytes of the value in p_data pointer, see @ref BLE_GATTS_ATTR_LENS_MAX. */ uint8_t *p_data; /**< Pointer to new value used to update the attribute value. */ } ble_gatts_read_authorize_params_t; /**@brief GATT Write Authorization parameters. */ typedef struct { uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */ } ble_gatts_write_authorize_params_t; /**@brief GATT Read or Write Authorize Reply parameters. */ typedef struct { uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */ union { ble_gatts_read_authorize_params_t read; /**< Read authorization parameters. */ ble_gatts_write_authorize_params_t write; /**< Write authorization parameters. */ } params; /**< Reply Parameters. */ } ble_gatts_rw_authorize_reply_params_t; /**@brief Event structure for @ref BLE_GATTS_EVT_WRITE. */ typedef struct { uint16_t handle; /**< Attribute Handle. */ uint8_t op; /**< Type of write operation, see @ref BLE_GATTS_OPS. */ ble_gatts_attr_context_t context; /**< Attribute Context. */ uint16_t offset; /**< Offset for the write operation. */ uint16_t len; /**< Length of the received data. */ uint8_t data[1]; /**< Received data, variable length. */ } ble_gatts_evt_write_t; /**@brief Event substructure for authorized read requests, see @ref ble_gatts_evt_rw_authorize_request_t. */ typedef struct { uint16_t handle; /**< Attribute Handle. */ ble_gatts_attr_context_t context; /**< Attribute Context. */ uint16_t offset; /**< Offset for the read operation. */ } ble_gatts_evt_read_t; /**@brief Event structure for @ref BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST. */ typedef struct { uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */ union { ble_gatts_evt_read_t read; /**< Attribute Read Parameters. */ ble_gatts_evt_write_t write; /**< Attribute Write Parameters. */ } request; /**< Request Parameters. */ } ble_gatts_evt_rw_authorize_request_t; /**@brief Event structure for @ref BLE_GATTS_EVT_SYS_ATTR_MISSING. */ typedef struct { uint8_t hint; /**< Hint (currently unused). */ } ble_gatts_evt_sys_attr_missing_t; /**@brief Event structure for @ref BLE_GATTS_EVT_HVC. */ typedef struct { uint16_t handle; /**< Attribute Handle. */ } ble_gatts_evt_hvc_t; /**@brief Event structure for @ref BLE_GATTS_EVT_TIMEOUT. */ typedef struct { uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */ } ble_gatts_evt_timeout_t; /**@brief GATT Server event callback event structure. */ typedef struct { uint16_t conn_handle; /**< Connection Handle on which the event occurred. */ union { ble_gatts_evt_write_t write; /**< Write Event Parameters. */ ble_gatts_evt_rw_authorize_request_t authorize_request; /**< Read or Write Authorize Request Parameters. */ ble_gatts_evt_sys_attr_missing_t sys_attr_missing; /**< System attributes missing. */ ble_gatts_evt_hvc_t hvc; /**< Handle Value Confirmation Event Parameters. */ ble_gatts_evt_timeout_t timeout; /**< Timeout Event. */ } params; /**< Event Parameters. */ } ble_gatts_evt_t; /** @} */ /** @addtogroup BLE_GATTS_FUNCTIONS Functions * @{ */ /**@brief Add a service declaration to the Attribute Table. * * @param[in] type Toggles between primary and secondary services, see @ref BLE_GATTS_SRVC_TYPES. * @param[in] p_uuid Pointer to service UUID. * @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored. * * @note Secondary Services are only relevant in the context of the entity that references them, it is therefore forbidden to * add a secondary service declaration that is not referenced by another service later in the Attribute Table. * * @retval ::NRF_SUCCESS Successfully added a service declaration. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, Vendor Specific UUIDs need to be present in the table. * @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack. * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. */ SVCALL(SD_BLE_GATTS_SERVICE_ADD, uint32_t, sd_ble_gatts_service_add(uint8_t type, ble_uuid_t const *p_uuid, uint16_t *p_handle)); /**@brief Add an include declaration to the Attribute Table. * * @note It is currently only possible to add an include declaration to the last added service (i.e. only sequential population is supported at this time). * * @note The included service must already be present in the Attribute Table prior to this call. * * @param[in] service_handle Handle of the service where the included service is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially. * @param[in] inc_srvc_handle Handle of the included service. * @param[out] p_include_handle Pointer to a 16-bit word where the assigned handle will be stored. * * @retval ::NRF_SUCCESS Successfully added an include declaration. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, handle values need to match previously added services. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. * @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, self inclusions are not allowed. * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. * @retval ::NRF_ERROR_NOT_FOUND Attribute not found. */ SVCALL(SD_BLE_GATTS_INCLUDE_ADD, uint32_t, sd_ble_gatts_include_add(uint16_t service_handle, uint16_t inc_srvc_handle, uint16_t *p_include_handle)); /**@brief Add a characteristic declaration, a characteristic value declaration and optional characteristic descriptor declarations to the Attribute Table. * * @note It is currently only possible to add a characteristic to the last added service (i.e. only sequential population is supported at this time). * * @note Several restrictions apply to the parameters, such as matching permissions between the user description descriptor and the writeable auxiliaries bits, * readable (no security) and writeable (selectable) CCCDs and SCCDs and valid presentation format values. * * @note If no metadata is provided for the optional descriptors, their permissions will be derived from the characteristic permissions. * * @param[in] service_handle Handle of the service where the characteristic is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially. * @param[in] p_char_md Characteristic metadata. * @param[in] p_attr_char_value Pointer to the attribute structure corresponding to the characteristic value. * @param[out] p_handles Pointer to the structure where the assigned handles will be stored. * * @retval ::NRF_SUCCESS Successfully added a characteristic. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, service handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a service context is required. * @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack. * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX. */ SVCALL(SD_BLE_GATTS_CHARACTERISTIC_ADD, uint32_t, sd_ble_gatts_characteristic_add(uint16_t service_handle, ble_gatts_char_md_t const *p_char_md, ble_gatts_attr_t const *p_attr_char_value, ble_gatts_char_handles_t *p_handles)); /**@brief Add a descriptor to the Attribute Table. * * @note It is currently only possible to add a descriptor to the last added characteristic (i.e. only sequential population is supported at this time). * * @param[in] char_handle Handle of the characteristic where the descriptor is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially. * @param[in] p_attr Pointer to the attribute structure. * @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored. * * @retval ::NRF_SUCCESS Successfully added a descriptor. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, characteristic handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a characteristic context is required. * @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack. * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX. */ SVCALL(SD_BLE_GATTS_DESCRIPTOR_ADD, uint32_t, sd_ble_gatts_descriptor_add(uint16_t char_handle, ble_gatts_attr_t const *p_attr, uint16_t *p_handle)); /**@brief Set the value of a given attribute. * * @param[in] conn_handle Connection handle. If the value does not belong to a system attribute then @ref BLE_CONN_HANDLE_INVALID can be used. * @param[in] handle Attribute handle. * @param[in,out] p_value Attribute value information. * * @note Values other than system attributes can be set at any time, regardless of wheter any active connections exist. * * @retval ::NRF_SUCCESS Successfully set the value of the attribute. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::NRF_ERROR_NOT_FOUND Attribute not found. * @retval ::NRF_ERROR_FORBIDDEN Forbidden handle supplied, certain attributes are not modifiable by the application. * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. * @retval ::BLE_ERROR_GATTS_INVALID_ATTR_TYPE @ref BLE_CONN_HANDLE_INVALID supplied on a system attribute. */ SVCALL(SD_BLE_GATTS_VALUE_SET, uint32_t, sd_ble_gatts_value_set(uint16_t conn_handle, uint16_t handle, ble_gatts_value_t *p_value)); /**@brief Get the value of a given attribute. * * @param[in] conn_handle Connection handle. If the value does not belong to a system attribute then @ref BLE_CONN_HANDLE_INVALID can be used. * @param[in] handle Attribute handle. * @param[in,out] p_value Attribute value information. * * @note If the attribute value is longer than the size of the supplied buffer, * p_len will return the total attribute value length (excluding offset), * and not the number of bytes actually returned in p_data. * The application may use this information to allocate a suitable buffer size. * * @note When retrieving system attribute values with this function, the connection handle * may refer to an already disconnected connection. Refer to the documentation of * @ref sd_ble_gatts_sys_attr_get for further information. * * @retval ::NRF_SUCCESS Successfully retrieved the value of the attribute. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_NOT_FOUND Attribute not found. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. * @retval ::BLE_ERROR_GATTS_INVALID_ATTR_TYPE @ref BLE_CONN_HANDLE_INVALID supplied on a system attribute. */ SVCALL(SD_BLE_GATTS_VALUE_GET, uint32_t, sd_ble_gatts_value_get(uint16_t conn_handle, uint16_t handle, ble_gatts_value_t *p_value)); /**@brief Notify or Indicate an attribute value. * * @details This function checks for the relevant Client Characteristic Configuration descriptor value to verify that the relevant operation * (notification or indication) has been enabled by the client. It is also able to update the attribute value before issuing the PDU, so that * the application can atomically perform a value update and a server initiated transaction with a single API call. * If the application chooses to indicate an attribute value, a @ref BLE_GATTS_EVT_HVC event will be issued as soon as the confirmation arrives from * the peer. * * @note The local attribute value may be updated even if an outgoing packet is not sent to the peer due to an error during execution. * When receiveing the error codes @ref NRF_ERROR_INVALID_STATE, @ref NRF_ERROR_BUSY, @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING and * @ref BLE_ERROR_NO_TX_BUFFERS the Attribute Table has been updated. * The caller can check whether the value has been updated by looking at the contents of *(p_hvx_params->p_len). * * @note It is important to note that a notification will <b>consume an application buffer</b>, and will therefore * generate a @ref BLE_EVT_TX_COMPLETE event when the packet has been transmitted. An indication on the other hand will use the * standard server internal buffer and thus will only generate a @ref BLE_GATTS_EVT_HVC event as soon as the confirmation * has been received from the peer. Please see the documentation of @ref sd_ble_tx_buffer_count_get for more details. * * @param[in] conn_handle Connection handle. * @param[in] p_hvx_params Pointer to an HVx parameters structure. If the p_data member contains a non-NULL pointer the attribute value will be updated with * the contents pointed by it before sending the notification or indication. * * @retval ::NRF_SUCCESS Successfully queued a notification or indication for transmission, and optionally updated the attribute value. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or notifications and/or indications not enabled in the CCCD. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied. Only attributes added directly by the application are available to notify and indicate. * @retval ::BLE_ERROR_GATTS_INVALID_ATTR_TYPE Invalid attribute type(s) supplied, only characteristic values may be notified and indicated. * @retval ::NRF_ERROR_NOT_FOUND Attribute not found. * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied. * @retval ::NRF_ERROR_BUSY Procedure already in progress. * @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value. * @retval ::BLE_ERROR_NO_TX_BUFFERS There are no available buffers to send the data, applies only to notifications. */ SVCALL(SD_BLE_GATTS_HVX, uint32_t, sd_ble_gatts_hvx(uint16_t conn_handle, ble_gatts_hvx_params_t const *p_hvx_params)); /**@brief Indicate the Service Changed attribute value. * * @details This call will send a Handle Value Indication to one or more peers connected to inform them that the Attribute * Table layout has changed. As soon as the peer has confirmed the indication, a @ref BLE_GATTS_EVT_SC_CONFIRM event will * be issued. * * @note Some of the restrictions and limitations that apply to @ref sd_ble_gatts_hvx also apply here. * * @param[in] conn_handle Connection handle. * @param[in] start_handle Start of affected attribute handle range. * @param[in] end_handle End of affected attribute handle range. * * @retval ::NRF_SUCCESS Successfully queued the Service Changed indication for transmission. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or notifications and/or indications not enabled in the CCCD. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied, handles must be in the range populated by the application. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, notifications or indications must be enabled in the CCCD. * @retval ::NRF_ERROR_BUSY Procedure already in progress. * @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value. */ SVCALL(SD_BLE_GATTS_SERVICE_CHANGED, uint32_t, sd_ble_gatts_service_changed(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle)); /**@brief Respond to a Read/Write authorization request. * * @note This call should only be used as a response to a @ref BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST event issued to the application. * * @param[in] conn_handle Connection handle. * @param[in] p_rw_authorize_reply_params Pointer to a structure with the attribute provided by the application. * * @retval ::NRF_SUCCESS Successfully queued a response to the peer, and in the case of a write operation, Attribute Table updated. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no authorization request pending. * @retval ::NRF_ERROR_INVALID_PARAM Authorization op invalid, * or for Read Authorization reply: requested handles not replied with, * or for Write Authorization reply: handle supplied does not match requested handle. * @retval ::NRF_ERROR_BUSY The stack is busy. Retry at later time. */ SVCALL(SD_BLE_GATTS_RW_AUTHORIZE_REPLY, uint32_t, sd_ble_gatts_rw_authorize_reply(uint16_t conn_handle, ble_gatts_rw_authorize_reply_params_t const *p_rw_authorize_reply_params)); /**@brief Update persistent system attribute information. * * @details Supply information about persistent system attributes to the stack, * previously obtained using @ref sd_ble_gatts_sys_attr_get. * This call is only allowed for active connections, and is usually * made immediately after a connection is established with an known bonded device, * often as a response to a @ref BLE_GATTS_EVT_SYS_ATTR_MISSING. * * p_sysattrs may point directly to the application's stored copy of the system attributes * obtained using @ref sd_ble_gatts_sys_attr_get. * If the pointer is NULL, the system attribute info is initialized, assuming that * the application does not have any previously saved system attribute data for this device. * * @note The state of persistent system attributes is reset upon connection establishment and then remembered for its duration. * * @note If this call returns with an error code different from @ref NRF_SUCCESS, the storage of persistent system attributes may have been completed only partially. * This means that the state of the attribute table is undefined, and the application should either provide a new set of attributes using this same call or * reset the SoftDevice to return to a known state. * * @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS is used with this function, only the system attributes included in system services will be modified. * @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS is used with this function, only the system attributes included in user services will be modified. * * @param[in] conn_handle Connection handle. * @param[in] p_sys_attr_data Pointer to a saved copy of system attributes supplied to the stack, or NULL. * @param[in] len Size of data pointed by p_sys_attr_data, in octets. * @param[in] flags Optional additional flags, see @ref BLE_GATTS_SYS_ATTR_FLAGS * * @retval ::NRF_SUCCESS Successfully set the system attribute information. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State. * @retval ::NRF_ERROR_INVALID_DATA Invalid data supplied, the data should be exactly the same as retrieved with @ref sd_ble_gatts_sys_attr_get. * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. * @retval ::NRF_ERROR_BUSY The stack is busy. Retry at later time. */ SVCALL(SD_BLE_GATTS_SYS_ATTR_SET, uint32_t, sd_ble_gatts_sys_attr_set(uint16_t conn_handle, uint8_t const *p_sys_attr_data, uint16_t len, uint32_t flags)); /**@brief Retrieve persistent system attribute information from the stack. * * @details This call is used to retrieve information about values to be stored perisistently by the application * during the lifetime of a connection or after it has been terminated. When a new connection is established with the same bonded device, * the system attribute information retrieved with this function should be restored using using @ref sd_ble_gatts_sys_attr_set. * If retrieved after disconnection, the data should be read before a new connection established. The connection handle for * the previous, now disconnected, connection will remain valid until a new one is created to allow this API call to refer to it. * Connection handles belonging to active connections can be used as well, but care should be taken since the system attributes * may be written to at any time by the peer during a connection's lifetime. * * @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS is used with this function, only the system attributes included in system services will be returned. * @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS is used with this function, only the system attributes included in user services will be returned. * * @param[in] conn_handle Connection handle of the recently terminated connection. * @param[out] p_sys_attr_data Pointer to a buffer where updated information about system attributes will be filled in. NULL can be provided to * obtain the length of the data * @param[in,out] p_len Size of application buffer if p_sys_attr_data is not NULL. Unconditially updated to actual length of system attribute data. * @param[in] flags Optional additional flags, see @ref BLE_GATTS_SYS_ATTR_FLAGS * * @retval ::NRF_SUCCESS Successfully retrieved the system attribute information. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_DATA_SIZE The system attribute information did not fit into the provided buffer. * @retval ::NRF_ERROR_NOT_FOUND No system attributes found. */ SVCALL(SD_BLE_GATTS_SYS_ATTR_GET, uint32_t, sd_ble_gatts_sys_attr_get(uint16_t conn_handle, uint8_t *p_sys_attr_data, uint16_t *p_len, uint32_t flags)); /** @} */ #endif // BLE_GATTS_H__ /** @} */