Nordic stack and drivers for the mbed BLE API
Dependents: Sensen-classic-v8-IAQ_copy_4
Fork of nRF51822 by
Diff: TARGET_MCU_NRF51822/sdk/source/drivers_nrf/hal/nrf_gpiote.h
- Revision:
- 638:c90ae1400bf2
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MCU_NRF51822/sdk/source/drivers_nrf/hal/nrf_gpiote.h Wed Sep 14 14:39:43 2016 +0100 @@ -0,0 +1,366 @@ +/* + * Copyright (c) Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef NRF_GPIOTE_H__ +#define NRF_GPIOTE_H__ + +#include "nrf.h" +#include <stdint.h> +#include <stddef.h> +#include <stdbool.h> + +/** +* @defgroup nrf_gpiote_abs GPIOTE abstraction +* @{ +* @ingroup nrf_gpiote +* @brief GPIOTE abstraction for configuration of channels. +*/ +#ifdef NRF51 +#define NUMBER_OF_GPIO_TE 4 +#elif defined NRF52 +#define NUMBER_OF_GPIO_TE 8 +#else +#error "Chip family not specified" +#endif + + /** + * @enum nrf_gpiote_polarity_t + * @brief Polarity for the GPIOTE channel. + */ +typedef enum +{ + NRF_GPIOTE_POLARITY_LOTOHI = GPIOTE_CONFIG_POLARITY_LoToHi, ///< Low to high. + NRF_GPIOTE_POLARITY_HITOLO = GPIOTE_CONFIG_POLARITY_HiToLo, ///< High to low. + NRF_GPIOTE_POLARITY_TOGGLE = GPIOTE_CONFIG_POLARITY_Toggle ///< Toggle. +} nrf_gpiote_polarity_t; + + + /** + * @enum nrf_gpiote_outinit_t + * @brief Initial output value for the GPIOTE channel. + */ +typedef enum +{ + NRF_GPIOTE_INITIAL_VALUE_LOW = GPIOTE_CONFIG_OUTINIT_Low, ///< Low to high. + NRF_GPIOTE_INITIAL_VALUE_HIGH = GPIOTE_CONFIG_OUTINIT_High ///< High to low. +} nrf_gpiote_outinit_t; + +/** + * @brief Tasks. + */ +typedef enum /*lint -save -e30 -esym(628,__INTADDR__) */ +{ + NRF_GPIOTE_TASKS_OUT_0 = offsetof(NRF_GPIOTE_Type, TASKS_OUT[0]), /**< Out task 0.*/ + NRF_GPIOTE_TASKS_OUT_1 = offsetof(NRF_GPIOTE_Type, TASKS_OUT[1]), /**< Out task 1.*/ + NRF_GPIOTE_TASKS_OUT_2 = offsetof(NRF_GPIOTE_Type, TASKS_OUT[2]), /**< Out task 2.*/ + NRF_GPIOTE_TASKS_OUT_3 = offsetof(NRF_GPIOTE_Type, TASKS_OUT[3]), /**< Out task 3.*/ + /*lint -restore*/ +} nrf_gpiote_tasks_t; + +/** + * @brief Events. + */ +typedef enum /*lint -save -e30 -esym(628,__INTADDR__) */ +{ + NRF_GPIOTE_EVENTS_IN_0 = offsetof(NRF_GPIOTE_Type, EVENTS_IN[0]), /**< In event 0.*/ + NRF_GPIOTE_EVENTS_IN_1 = offsetof(NRF_GPIOTE_Type, EVENTS_IN[1]), /**< In event 1.*/ + NRF_GPIOTE_EVENTS_IN_2 = offsetof(NRF_GPIOTE_Type, EVENTS_IN[2]), /**< In event 2.*/ + NRF_GPIOTE_EVENTS_IN_3 = offsetof(NRF_GPIOTE_Type, EVENTS_IN[3]), /**< In event 3.*/ + NRF_GPIOTE_EVENTS_PORT = offsetof(NRF_GPIOTE_Type, EVENTS_PORT), /**< Port event.*/ + /*lint -restore*/ +} nrf_gpiote_events_t; + +/** + * @enum nrf_gpiote_int_t + * @brief GPIOTE interrupts. + */ +typedef enum +{ + NRF_GPIOTE_INT_IN0_MASK = GPIOTE_INTENSET_IN0_Msk, /**< GPIOTE interrupt from IN0. */ + NRF_GPIOTE_INT_IN1_MASK = GPIOTE_INTENSET_IN1_Msk, /**< GPIOTE interrupt from IN1. */ + NRF_GPIOTE_INT_IN2_MASK = GPIOTE_INTENSET_IN2_Msk, /**< GPIOTE interrupt from IN2. */ + NRF_GPIOTE_INT_IN3_MASK = GPIOTE_INTENSET_IN3_Msk, /**< GPIOTE interrupt from IN3. */ + NRF_GPIOTE_INT_PORT_MASK = (int)GPIOTE_INTENSET_PORT_Msk, /**< GPIOTE interrupt from PORT event. */ +} nrf_gpiote_int_t; + +#define NRF_GPIOTE_INT_IN_MASK (NRF_GPIOTE_INT_IN0_MASK | NRF_GPIOTE_INT_IN1_MASK |\ + NRF_GPIOTE_INT_IN2_MASK | NRF_GPIOTE_INT_IN3_MASK) +/** + * @brief Function for activating a specific GPIOTE task. + * + * @param[in] task Task. + */ +__STATIC_INLINE void nrf_gpiote_task_set(nrf_gpiote_tasks_t task); + +/** + * @brief Function for getting the address of a specific GPIOTE task. + * + * @param[in] task Task. + * + * @returns Address. + */ +__STATIC_INLINE uint32_t nrf_gpiote_task_addr_get(nrf_gpiote_tasks_t task); + +/** + * @brief Function for getting the state of a specific GPIOTE event. + * + * @param[in] event Event. + */ +__STATIC_INLINE bool nrf_gpiote_event_is_set(nrf_gpiote_events_t event); + +/** + * @brief Function for clearing a specific GPIOTE event. + * + * @param[in] event Event. + */ +__STATIC_INLINE void nrf_gpiote_event_clear(nrf_gpiote_events_t event); + +/** + * @brief Function for getting the address of a specific GPIOTE event. + * + * @param[in] event Event. + * + * @return Address + */ +__STATIC_INLINE uint32_t nrf_gpiote_event_addr_get(nrf_gpiote_events_t event); + +/**@brief Function for enabling interrupts. + * + * @param[in] mask Interrupt mask to be enabled. + */ +__STATIC_INLINE void nrf_gpiote_int_enable(uint32_t mask); + +/**@brief Function for disabling interrupts. + * + * @param[in] mask Interrupt mask to be disabled. + */ +__STATIC_INLINE void nrf_gpiote_int_disable(uint32_t mask); + +/**@brief Function for checking if interrupts are enabled. + * + * @param[in] mask Mask of interrupt flags to check. + * + * @return Mask with enabled interrupts. + */ +__STATIC_INLINE uint32_t nrf_gpiote_int_is_enabled(uint32_t mask); + +/**@brief Function for enabling a GPIOTE event. + * + * @param[in] idx Task-Event index. + */ +__STATIC_INLINE void nrf_gpiote_event_enable(uint32_t idx); + +/**@brief Function for disabling a GPIOTE event. + * + * @param[in] idx Task-Event index. + */ +__STATIC_INLINE void nrf_gpiote_event_disable(uint32_t idx); + +/**@brief Function for configuring a GPIOTE event. + * + * @param[in] idx Task-Event index. + * @param[in] pin Pin associated with event. + * @param[in] polarity Transition that should generate an event. + */ +__STATIC_INLINE void nrf_gpiote_event_configure(uint32_t idx, uint32_t pin, + nrf_gpiote_polarity_t polarity); + +/**@brief Function for getting the pin associated with a GPIOTE event. + * + * @param[in] idx Task-Event index. + * + * @return Pin number. + */ +__STATIC_INLINE uint32_t nrf_gpiote_event_pin_get(uint32_t idx); + +/**@brief Function for getting the polarity associated with a GPIOTE event. + * + * @param[in] idx Task-Event index. + * + * @return Polarity. + */ +__STATIC_INLINE nrf_gpiote_polarity_t nrf_gpiote_event_polarity_get(uint32_t idx); + +/**@brief Function for enabling a GPIOTE task. + * + * @param[in] idx Task-Event index. + */ +__STATIC_INLINE void nrf_gpiote_task_enable(uint32_t idx); + +/**@brief Function for disabling a GPIOTE task. + * + * @param[in] idx Task-Event index. + */ +__STATIC_INLINE void nrf_gpiote_task_disable(uint32_t idx); + +/**@brief Function for configuring a GPIOTE task. + * @note Function is not configuring mode field so task is disabled after this function is called. + * + * @param[in] idx Task-Event index. + * @param[in] pin Pin associated with event. + * @param[in] polarity Transition that should generate an event. + * @param[in] init_val Initial value of pin. + */ +__STATIC_INLINE void nrf_gpiote_task_configure(uint32_t idx, uint32_t pin, + nrf_gpiote_polarity_t polarity, + nrf_gpiote_outinit_t init_val); + +/**@brief Function for forcing a specific state on the pin connected to GPIOTE. + * + * @param[in] idx Task-Event index. + * @param[in] init_val Pin state. + */ +__STATIC_INLINE void nrf_gpiote_task_force(uint32_t idx, nrf_gpiote_outinit_t init_val); + +/**@brief Function for resetting a GPIOTE task event configuration to the default state. + * + * @param[in] idx Task-Event index. + */ +__STATIC_INLINE void nrf_gpiote_te_default(uint32_t idx); + +#ifndef SUPPRESS_INLINE_IMPLEMENTATION +__STATIC_INLINE void nrf_gpiote_task_set(nrf_gpiote_tasks_t task) +{ + *(__IO uint32_t *)((uint32_t)NRF_GPIOTE + task) = 0x1UL; +} + +__STATIC_INLINE uint32_t nrf_gpiote_task_addr_get(nrf_gpiote_tasks_t task) +{ + return ((uint32_t)NRF_GPIOTE + task); +} + +__STATIC_INLINE bool nrf_gpiote_event_is_set(nrf_gpiote_events_t event) +{ + return (*(uint32_t *)nrf_gpiote_event_addr_get(event) == 0x1UL) ? true : false; +} + +__STATIC_INLINE void nrf_gpiote_event_clear(nrf_gpiote_events_t event) +{ + *(uint32_t *)nrf_gpiote_event_addr_get(event) = 0; +#if __CORTEX_M == 0x04 + volatile uint32_t dummy = *((volatile uint32_t *)nrf_gpiote_event_addr_get(event)); + (void)dummy; +#endif +} + +__STATIC_INLINE uint32_t nrf_gpiote_event_addr_get(nrf_gpiote_events_t event) +{ + return ((uint32_t)NRF_GPIOTE + event); +} + +__STATIC_INLINE void nrf_gpiote_int_enable(uint32_t mask) +{ + NRF_GPIOTE->INTENSET = mask; +} + +__STATIC_INLINE void nrf_gpiote_int_disable(uint32_t mask) +{ + NRF_GPIOTE->INTENCLR = mask; +} + +__STATIC_INLINE uint32_t nrf_gpiote_int_is_enabled(uint32_t mask) +{ + return (NRF_GPIOTE->INTENSET & mask); +} + +__STATIC_INLINE void nrf_gpiote_event_enable(uint32_t idx) +{ + NRF_GPIOTE->CONFIG[idx] |= GPIOTE_CONFIG_MODE_Event; +} + +__STATIC_INLINE void nrf_gpiote_event_disable(uint32_t idx) +{ + NRF_GPIOTE->CONFIG[idx] &= ~GPIOTE_CONFIG_MODE_Event; +} + +__STATIC_INLINE void nrf_gpiote_event_configure(uint32_t idx, uint32_t pin, nrf_gpiote_polarity_t polarity) +{ + NRF_GPIOTE->CONFIG[idx] &= ~(GPIOTE_CONFIG_PSEL_Msk | GPIOTE_CONFIG_POLARITY_Msk); + NRF_GPIOTE->CONFIG[idx] |= ((pin << GPIOTE_CONFIG_PSEL_Pos) & GPIOTE_CONFIG_PSEL_Msk) | + ((polarity << GPIOTE_CONFIG_POLARITY_Pos) & GPIOTE_CONFIG_POLARITY_Msk); +} + +__STATIC_INLINE uint32_t nrf_gpiote_event_pin_get(uint32_t idx) +{ + return ((NRF_GPIOTE->CONFIG[idx] & GPIOTE_CONFIG_PSEL_Msk) >> GPIOTE_CONFIG_PSEL_Pos); +} + +__STATIC_INLINE nrf_gpiote_polarity_t nrf_gpiote_event_polarity_get(uint32_t idx) +{ + return (nrf_gpiote_polarity_t)((NRF_GPIOTE->CONFIG[idx] & GPIOTE_CONFIG_POLARITY_Msk) >> GPIOTE_CONFIG_POLARITY_Pos); +} + +__STATIC_INLINE void nrf_gpiote_task_enable(uint32_t idx) +{ + uint32_t final_config = NRF_GPIOTE->CONFIG[idx] | GPIOTE_CONFIG_MODE_Task; + /* Workaround for the OUTINIT PAN. When nrf_gpiote_task_config() is called a glitch happens + on the GPIO if the GPIO in question is already assigned to GPIOTE and the pin is in the + correct state in GPIOTE but not in the OUT register. */ + /* Configure channel to Pin31, not connected to the pin, and configure as a tasks that will set it to proper level */ + NRF_GPIOTE->CONFIG[idx] = final_config | ((31 << GPIOTE_CONFIG_PSEL_Pos) & GPIOTE_CONFIG_PSEL_Msk); + __NOP(); + __NOP(); + __NOP(); + NRF_GPIOTE->CONFIG[idx] = final_config; +} + +__STATIC_INLINE void nrf_gpiote_task_disable(uint32_t idx) +{ + NRF_GPIOTE->CONFIG[idx] &= ~GPIOTE_CONFIG_MODE_Task; +} + +__STATIC_INLINE void nrf_gpiote_task_configure(uint32_t idx, uint32_t pin, + nrf_gpiote_polarity_t polarity, + nrf_gpiote_outinit_t init_val) +{ + NRF_GPIOTE->CONFIG[idx] &= ~(GPIOTE_CONFIG_PSEL_Msk | + GPIOTE_CONFIG_POLARITY_Msk | + GPIOTE_CONFIG_OUTINIT_Msk); + + NRF_GPIOTE->CONFIG[idx] |= ((pin << GPIOTE_CONFIG_PSEL_Pos) & GPIOTE_CONFIG_PSEL_Msk) | + ((polarity << GPIOTE_CONFIG_POLARITY_Pos) & GPIOTE_CONFIG_POLARITY_Msk) | + ((init_val << GPIOTE_CONFIG_OUTINIT_Pos) & GPIOTE_CONFIG_OUTINIT_Msk); +} + +__STATIC_INLINE void nrf_gpiote_task_force(uint32_t idx, nrf_gpiote_outinit_t init_val) +{ + NRF_GPIOTE->CONFIG[idx] = (NRF_GPIOTE->CONFIG[idx] & ~GPIOTE_CONFIG_OUTINIT_Msk) + | ((init_val << GPIOTE_CONFIG_OUTINIT_Pos) & GPIOTE_CONFIG_OUTINIT_Msk); +} + +__STATIC_INLINE void nrf_gpiote_te_default(uint32_t idx) +{ + NRF_GPIOTE->CONFIG[idx] = 0; +} +#endif //SUPPRESS_INLINE_IMPLEMENTATION +/** @} */ + +#endif