Mateusz Grzywacz / TextLCD_YWROBOT

just a fork with another display choosen. LCD at D1 ROBOT shield seems to in YWROBOT configuration.

Dependents:   Nucleo_praktyki

Fork of TextLCD by Wim Huiskamp

TextLCD_Config.h@42:6c5cf2a0d238, 2018-01-31 (annotated)

Committer:
amateusz
Date:
Wed Jan 31 11:47:46 2018 +0000
Revision:
42:6c5cf2a0d238
Parent:
41:111ca62e8a59 
Changed configuration, because my LCD is YWROBOT and not DEFAULT. But I don't really want to commit this to repo.. I just want to publish my program, so if this gets commited I'll try to delete it or something.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
wim 37:ce348c002929 1 /* mbed TextLCD Library, for LCDs based on HD44780 controllers
wim 34:e5a0dcb43ecc 2 * Copyright (c) 2014, WH
wim 34:e5a0dcb43ecc 3 * 2014, v01: WH, Extracted from TextLCD.h as of v14
wim 35:311be6444a39 4 * 2014, v02: WH, Added AC780 support, added I2C expander modules, fixed setBacklight() for inverted logic modules. Fixed bug in LCD_SPI_N define
wim 36:9f5f86dfd44a 5 * 2014, v03: WH, Added LCD_SPI_N_3_8 define for ST7070
wim 37:ce348c002929 6 * 2015, v04: WH, Added support for alternative fonttables (eg PCF21XX)
wim 37:ce348c002929 7 * 2015, v05: WH, Clean up low-level _writeCommand() and _writeData(), Added support for alt fonttables (eg PCF21XX), Added ST7066_ACM for ACM1602 module, fixed contrast for ST7032
wim 38:cbe275b0b647 8 * 2015, v06: WH, Performance improvement I2C portexpander
wim 38:cbe275b0b647 9 * 2015, v07: WH, Fixed Adafruit I2C/SPI portexpander pinmappings, fixed SYDZ Backlight
wim 39:e9c2319de9c5 10 * 2015, v08: WH, Added defines to reduce memory footprint (eg LCD_ICON), added some I2C portexpander defines
wim 41:111ca62e8a59 11 * 2015, v09: WH, Added defines to reduce memory footprint (LCD_TWO_CTRL, LCD_CONTRAST, LCD_UTF8_FONT),
wim 41:111ca62e8a59 12 * Added UTF8_2_LCD decode for Cyrilic font (By Andriy Ribalko). Added setFont()
wim 34:e5a0dcb43ecc 13 *
wim 34:e5a0dcb43ecc 14 * Permission is hereby granted, free of charge, to any person obtaining a copy
wim 34:e5a0dcb43ecc 15 * of this software and associated documentation files (the "Software"), to deal
wim 34:e5a0dcb43ecc 16 * in the Software without restriction, including without limitation the rights
wim 34:e5a0dcb43ecc 17 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
wim 34:e5a0dcb43ecc 18 * copies of the Software, and to permit persons to whom the Software is
wim 34:e5a0dcb43ecc 19 * furnished to do so, subject to the following conditions:
wim 34:e5a0dcb43ecc 20 *
wim 34:e5a0dcb43ecc 21 * The above copyright notice and this permission notice shall be included in
wim 34:e5a0dcb43ecc 22 * all copies or substantial portions of the Software.
wim 34:e5a0dcb43ecc 23 *
wim 34:e5a0dcb43ecc 24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
wim 34:e5a0dcb43ecc 25 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
wim 34:e5a0dcb43ecc 26 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
wim 34:e5a0dcb43ecc 27 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
wim 34:e5a0dcb43ecc 28 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
wim 34:e5a0dcb43ecc 29 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
wim 34:e5a0dcb43ecc 30 * THE SOFTWARE.
wim 34:e5a0dcb43ecc 31 */
wim 34:e5a0dcb43ecc 32 #ifndef MBED_TEXTLCDCONFIG_H
wim 34:e5a0dcb43ecc 33 #define MBED_TEXTLCDCONFIG_H
wim 34:e5a0dcb43ecc 34
wim 34:e5a0dcb43ecc 35 //Select hardware interface options to reduce memory footprint (multiple options allowed)
wim 34:e5a0dcb43ecc 36 #define LCD_I2C 1 /* I2C Expander PCF8574/MCP23008 */
wim 34:e5a0dcb43ecc 37 #define LCD_SPI 1 /* SPI Expander SN74595 */
wim 34:e5a0dcb43ecc 38 #define LCD_I2C_N 1 /* Native I2C bus */
wim 35:311be6444a39 39 #define LCD_SPI_N 1 /* Native SPI bus */
wim 36:9f5f86dfd44a 40 #define LCD_SPI_N_3_8 1 /* Native SPI bus */
wim 34:e5a0dcb43ecc 41 #define LCD_SPI_N_3_9 1 /* Native SPI bus */
wim 34:e5a0dcb43ecc 42 #define LCD_SPI_N_3_10 1 /* Native SPI bus */
wim 34:e5a0dcb43ecc 43 #define LCD_SPI_N_3_16 1 /* Native SPI bus */
wim 34:e5a0dcb43ecc 44 #define LCD_SPI_N_3_24 1 /* Native SPI bus */
wim 35:311be6444a39 45
wim 34:e5a0dcb43ecc 46 //Select options to reduce memory footprint (multiple options allowed)
wim 39:e9c2319de9c5 47 #define LCD_UDC 1 /* Enable predefined UDC example*/
wim 39:e9c2319de9c5 48 #define LCD_PRINTF 1 /* Enable Stream implementation */
wim 39:e9c2319de9c5 49 #define LCD_ICON 1 /* Enable Icon implementation -2.0K codesize*/
wim 39:e9c2319de9c5 50 #define LCD_ORIENT 1 /* Enable Orientation switch implementation -0.9K codesize*/
wim 40:d3496c3ea301 51 #define LCD_BIGFONT 1 /* Enable Big Font implementation -0.6K codesize */
wim 40:d3496c3ea301 52 #define LCD_INVERT 1 /* Enable display Invert implementation -0.5K codesize*/
wim 40:d3496c3ea301 53 #define LCD_POWER 1 /* Enable Power control implementation -0.1K codesize*/
wim 39:e9c2319de9c5 54 #define LCD_BLINK 1 /* Enable UDC and Icon Blink control implementation -0.8K codesize*/
wim 41:111ca62e8a59 55 #define LCD_CONTRAST 1 /* Enable Contrast control implementation -0.9K codesize*/
wim 41:111ca62e8a59 56 #define LCD_TWO_CTRL 1 /* Enable LCD40x4 (two controller) implementation -0.1K codesize*/
wim 41:111ca62e8a59 57 #define LCD_FONTSEL 0 /* Enable runtime font select implementation using setFont -0.9K codesize*/
wim 34:e5a0dcb43ecc 58
wim 41:111ca62e8a59 59 //Select option to activate default fonttable or alternatively use conversion for specific controller versions (eg PCF2116C, PCF2119R, SSD1803, US2066)
wim 41:111ca62e8a59 60 #define LCD_DEF_FONT 1 //Default HD44780 font
wim 41:111ca62e8a59 61 //#define LCD_C_FONT 1 //PCF21xxC font
wim 41:111ca62e8a59 62 //#define LCD_R_FONT 1 //PCF21xxR font
wim 41:111ca62e8a59 63 //#define LCD_UTF8_FONT 1 /* Enable UTF8 Support (eg Cyrillic tables) -0.4K codesize*/
wim 41:111ca62e8a59 64 //#define LCD_UTF8_CYR_B 1 /* Select specific UTF8 Cyrillic table (SSD1803 ROM_B) */
wim 37:ce348c002929 65
wim 34:e5a0dcb43ecc 66 //Pin Defines for I2C PCF8574/PCF8574A or MCP23008 and SPI 74595 bus expander interfaces
wim 37:ce348c002929 67 //Different commercially available LCD portexpanders use different wiring conventions.
wim 37:ce348c002929 68 //LCD and serial portexpanders should be wired according to the tables below.
wim 34:e5a0dcb43ecc 69 //
wim 37:ce348c002929 70 //Select Serial Port Expander Hardware module (one option only)
amateusz 42:6c5cf2a0d238 71 #define DEFAULT 0
wim 34:e5a0dcb43ecc 72 #define ADAFRUIT 0
wim 34:e5a0dcb43ecc 73 #define DFROBOT 0
wim 39:e9c2319de9c5 74 #define LCM1602 0
amateusz 42:6c5cf2a0d238 75 #define YWROBOT 1
wim 35:311be6444a39 76 #define GYLCD 0
wim 39:e9c2319de9c5 77 #define MJKDZ 0
wim 40:d3496c3ea301 78 #define SYDZ 0
wim 39:e9c2319de9c5 79 #define WIDEHK 0
wim 39:e9c2319de9c5 80 #define LCDPLUG 0
wim 34:e5a0dcb43ecc 81
wim 34:e5a0dcb43ecc 82 #if (DEFAULT==1)
wim 34:e5a0dcb43ecc 83 //Definitions for default (WH) mapping between serial port expander pins and LCD controller
wim 34:e5a0dcb43ecc 84 //This hardware supports the I2C bus expander (PCF8574/PCF8574A or MCP23008) and SPI bus expander (74595) interfaces
wim 34:e5a0dcb43ecc 85 //See https://mbed.org/cookbook/Text-LCD-Enhanced
wim 34:e5a0dcb43ecc 86 //
wim 34:e5a0dcb43ecc 87 //Note: LCD RW pin must be connected to GND
wim 34:e5a0dcb43ecc 88 // E2 is used for LCD40x4 (second controller)
wim 34:e5a0dcb43ecc 89 // BL may be used to control backlight
wim 38:cbe275b0b647 90
wim 38:cbe275b0b647 91 //I2C bus expander (PCF8574/PCF8574A or MCP23008) interface
wim 38:cbe275b0b647 92 #define LCD_BUS_I2C_D4 (1 << 0)
wim 38:cbe275b0b647 93 #define LCD_BUS_I2C_D5 (1 << 1)
wim 38:cbe275b0b647 94 #define LCD_BUS_I2C_D6 (1 << 2)
wim 38:cbe275b0b647 95 #define LCD_BUS_I2C_D7 (1 << 3)
wim 38:cbe275b0b647 96 #define LCD_BUS_I2C_RS (1 << 4)
wim 38:cbe275b0b647 97 #define LCD_BUS_I2C_E (1 << 5)
wim 38:cbe275b0b647 98 #define LCD_BUS_I2C_E2 (1 << 6)
wim 38:cbe275b0b647 99 #define LCD_BUS_I2C_BL (1 << 7)
wim 34:e5a0dcb43ecc 100
wim 38:cbe275b0b647 101 #define LCD_BUS_I2C_RW (1 << 6)
wim 38:cbe275b0b647 102
wim 38:cbe275b0b647 103 //SPI bus expander (74595) interface, same as I2C
wim 38:cbe275b0b647 104 #define LCD_BUS_SPI_D4 LCD_BUS_I2C_D4
wim 38:cbe275b0b647 105 #define LCD_BUS_SPI_D5 LCD_BUS_I2C_D5
wim 38:cbe275b0b647 106 #define LCD_BUS_SPI_D6 LCD_BUS_I2C_D6
wim 38:cbe275b0b647 107 #define LCD_BUS_SPI_D7 LCD_BUS_I2C_D7
wim 38:cbe275b0b647 108 #define LCD_BUS_SPI_RS LCD_BUS_I2C_RS
wim 38:cbe275b0b647 109 #define LCD_BUS_SPI_E LCD_BUS_I2C_E
wim 38:cbe275b0b647 110 #define LCD_BUS_SPI_E2 LCD_BUS_I2C_E2
wim 38:cbe275b0b647 111 #define LCD_BUS_SPI_BL LCD_BUS_I2C_BL
wim 38:cbe275b0b647 112
wim 38:cbe275b0b647 113 #define LCD_BUS_SPI_RW LCD_BUS_I2C_RW
wim 34:e5a0dcb43ecc 114
wim 34:e5a0dcb43ecc 115 //Select I2C Portexpander type (one option only)
wim 34:e5a0dcb43ecc 116 #define PCF8574 1
wim 34:e5a0dcb43ecc 117 #define MCP23008 0
wim 35:311be6444a39 118
wim 35:311be6444a39 119 //Inverted Backlight control
wim 35:311be6444a39 120 #define BACKLIGHT_INV 0
wim 34:e5a0dcb43ecc 121 #endif
wim 34:e5a0dcb43ecc 122
wim 34:e5a0dcb43ecc 123 #if (ADAFRUIT==1)
wim 34:e5a0dcb43ecc 124 //Definitions for Adafruit i2cspilcdbackpack mapping between serial port expander pins and LCD controller
wim 34:e5a0dcb43ecc 125 //This hardware supports both an I2C expander (MCP23008) and an SPI expander (74595) selectable by a jumper.
wim 35:311be6444a39 126 //Slaveaddress may be set by solderbridges (default 0x40). SDA/SCL has pullup Resistors onboard.
wim 34:e5a0dcb43ecc 127 //See http://www.ladyada.net/products/i2cspilcdbackpack
wim 34:e5a0dcb43ecc 128 //
wim 34:e5a0dcb43ecc 129 //Note: LCD RW pin must be kept LOW
wim 34:e5a0dcb43ecc 130 // E2 is not available on this hardware and so it does not support LCD40x4 (second controller)
wim 34:e5a0dcb43ecc 131 // BL is used to control backlight
wim 38:cbe275b0b647 132 //Note: The pinmappings are different for the MCP23008 and the 74595!
wim 38:cbe275b0b647 133
wim 38:cbe275b0b647 134 //I2C bus expander (MCP23008) interface
wim 38:cbe275b0b647 135 #define LCD_BUS_I2C_0 (1 << 0)
wim 38:cbe275b0b647 136 #define LCD_BUS_I2C_RS (1 << 1)
wim 38:cbe275b0b647 137 #define LCD_BUS_I2C_E (1 << 2)
wim 38:cbe275b0b647 138 #define LCD_BUS_I2C_D4 (1 << 3)
wim 38:cbe275b0b647 139 #define LCD_BUS_I2C_D5 (1 << 4)
wim 38:cbe275b0b647 140 #define LCD_BUS_I2C_D6 (1 << 5)
wim 38:cbe275b0b647 141 #define LCD_BUS_I2C_D7 (1 << 6)
wim 38:cbe275b0b647 142 #define LCD_BUS_I2C_BL (1 << 7)
wim 34:e5a0dcb43ecc 143
wim 38:cbe275b0b647 144 #define LCD_BUS_I2C_E2 (1 << 0)
wim 38:cbe275b0b647 145 #define LCD_BUS_I2C_RW (1 << 0)
wim 38:cbe275b0b647 146
wim 38:cbe275b0b647 147 //SPI bus expander (74595) interface
wim 38:cbe275b0b647 148 #define LCD_BUS_SPI_0 (1 << 0)
wim 38:cbe275b0b647 149 #define LCD_BUS_SPI_RS (1 << 1)
wim 38:cbe275b0b647 150 #define LCD_BUS_SPI_E (1 << 2)
wim 38:cbe275b0b647 151 #define LCD_BUS_SPI_D7 (1 << 3)
wim 38:cbe275b0b647 152 #define LCD_BUS_SPI_D6 (1 << 4)
wim 38:cbe275b0b647 153 #define LCD_BUS_SPI_D5 (1 << 5)
wim 38:cbe275b0b647 154 #define LCD_BUS_SPI_D4 (1 << 6)
wim 38:cbe275b0b647 155 #define LCD_BUS_SPI_BL (1 << 7)
wim 38:cbe275b0b647 156
wim 38:cbe275b0b647 157 #define LCD_BUS_SPI_E2 (1 << 0)
wim 38:cbe275b0b647 158 #define LCD_BUS_SPI_RW (1 << 0)
wim 34:e5a0dcb43ecc 159
wim 34:e5a0dcb43ecc 160 //Force I2C portexpander type
wim 34:e5a0dcb43ecc 161 #define PCF8574 0
wim 34:e5a0dcb43ecc 162 #define MCP23008 1
wim 35:311be6444a39 163
wim 35:311be6444a39 164 //Inverted Backlight control
wim 35:311be6444a39 165 #define BACKLIGHT_INV 0
wim 34:e5a0dcb43ecc 166 #endif
wim 34:e5a0dcb43ecc 167
wim 34:e5a0dcb43ecc 168 #if (DFROBOT==1)
wim 34:e5a0dcb43ecc 169 //Definitions for DFROBOT LCD2004 Module mapping between serial port expander pins and LCD controller
wim 34:e5a0dcb43ecc 170 //This hardware uses PCF8574 and is different from earlier/different Arduino I2C LCD displays
wim 35:311be6444a39 171 //Slaveaddress hardwired to 0x4E. SDA/SCL has pullup Resistors onboard.
wim 35:311be6444a39 172 //See http://arduino-info.wikispaces.com/LCD-Blue-I2C
wim 35:311be6444a39 173 //
wim 35:311be6444a39 174 //Definitions for DFROBOT V1.1
wim 35:311be6444a39 175 //This hardware uses PCF8574. Slaveaddress may be set by jumpers (default 0x40).
wim 35:311be6444a39 176 //SDA/SCL has pullup Resistors onboard and features a voltage level converter 3V3 <-> 5V.
wim 35:311be6444a39 177 //See http://www.dfrobot.com/index.php?route=product/product&product_id=135
wim 35:311be6444a39 178 //
wim 35:311be6444a39 179 //
wim 35:311be6444a39 180 //Note: LCD RW pin must be kept LOW
wim 35:311be6444a39 181 // E2 is not available on default Arduino hardware and so it does not support LCD40x4 (second controller)
wim 35:311be6444a39 182 // BL is used to control backlight
wim 38:cbe275b0b647 183
wim 38:cbe275b0b647 184 //I2C bus expander PCF8574 interface
wim 38:cbe275b0b647 185 #define LCD_BUS_I2C_RS (1 << 0)
wim 38:cbe275b0b647 186 #define LCD_BUS_I2C_RW (1 << 1)
wim 38:cbe275b0b647 187 #define LCD_BUS_I2C_E (1 << 2)
wim 38:cbe275b0b647 188 #define LCD_BUS_I2C_BL (1 << 3)
wim 38:cbe275b0b647 189 #define LCD_BUS_I2C_D4 (1 << 4)
wim 38:cbe275b0b647 190 #define LCD_BUS_I2C_D5 (1 << 5)
wim 38:cbe275b0b647 191 #define LCD_BUS_I2C_D6 (1 << 6)
wim 38:cbe275b0b647 192 #define LCD_BUS_I2C_D7 (1 << 7)
wim 38:cbe275b0b647 193
wim 38:cbe275b0b647 194 #define LCD_BUS_I2C_E2 (1 << 1)
wim 35:311be6444a39 195
wim 38:cbe275b0b647 196 //SPI bus expander (74595) interface, same as I2C
wim 38:cbe275b0b647 197 #define LCD_BUS_SPI_RS LCD_BUS_I2C_RS
wim 38:cbe275b0b647 198 #define LCD_BUS_SPI_RW LCD_BUS_I2C_RW
wim 38:cbe275b0b647 199 #define LCD_BUS_SPI_E LCD_BUS_I2C_E
wim 38:cbe275b0b647 200 #define LCD_BUS_SPI_BL LCD_BUS_I2C_BL
wim 38:cbe275b0b647 201 #define LCD_BUS_SPI_D4 LCD_BUS_I2C_D4
wim 38:cbe275b0b647 202 #define LCD_BUS_SPI_D5 LCD_BUS_I2C_D5
wim 38:cbe275b0b647 203 #define LCD_BUS_SPI_D6 LCD_BUS_I2C_D6
wim 38:cbe275b0b647 204 #define LCD_BUS_SPI_D7 LCD_BUS_I2C_D7
wim 38:cbe275b0b647 205
wim 38:cbe275b0b647 206 #define LCD_BUS_SPI_E2 LCD_BUS_I2C_E2
wim 38:cbe275b0b647 207
wim 35:311be6444a39 208
wim 35:311be6444a39 209 //Force I2C portexpander type
wim 35:311be6444a39 210 #define PCF8574 1
wim 35:311be6444a39 211 #define MCP23008 0
wim 35:311be6444a39 212
wim 35:311be6444a39 213 //Inverted Backlight control
wim 35:311be6444a39 214 #define BACKLIGHT_INV 0
wim 35:311be6444a39 215 #endif
wim 35:311be6444a39 216
wim 39:e9c2319de9c5 217 #if ((YWROBOT==1) || (LCM1602==1))
wim 35:311be6444a39 218 //Definitions for YWROBOT LCM1602 V1 Module mapping between serial port expander pins and LCD controller.
wim 39:e9c2319de9c5 219 //Very similar to DFROBOT. Also marked as 'Funduino'. This hardware uses PCF8574.
wim 35:311be6444a39 220 //Slaveaddress may be set by solderbridges (default 0x4E). SDA/SCL has no pullup Resistors onboard.
wim 34:e5a0dcb43ecc 221 //See http://arduino-info.wikispaces.com/LCD-Blue-I2C
wim 34:e5a0dcb43ecc 222 //
wim 34:e5a0dcb43ecc 223 //Note: LCD RW pin must be kept LOW
wim 35:311be6444a39 224 // E2 is not available on default hardware and so it does not support LCD40x4 (second controller)
wim 39:e9c2319de9c5 225 // BL is used to control backlight.
wim 38:cbe275b0b647 226
wim 38:cbe275b0b647 227 //I2C bus expander PCF8574 interface
wim 38:cbe275b0b647 228 #define LCD_BUS_I2C_RS (1 << 0)
wim 38:cbe275b0b647 229 #define LCD_BUS_I2C_RW (1 << 1)
wim 38:cbe275b0b647 230 #define LCD_BUS_I2C_E (1 << 2)
wim 38:cbe275b0b647 231 #define LCD_BUS_I2C_BL (1 << 3)
wim 38:cbe275b0b647 232 #define LCD_BUS_I2C_D4 (1 << 4)
wim 38:cbe275b0b647 233 #define LCD_BUS_I2C_D5 (1 << 5)
wim 38:cbe275b0b647 234 #define LCD_BUS_I2C_D6 (1 << 6)
wim 38:cbe275b0b647 235 #define LCD_BUS_I2C_D7 (1 << 7)
wim 34:e5a0dcb43ecc 236
wim 38:cbe275b0b647 237 #define LCD_BUS_I2C_E2 (1 << 1)
wim 38:cbe275b0b647 238
wim 38:cbe275b0b647 239 //SPI bus expander (74595) interface, same as I2C
wim 38:cbe275b0b647 240 #define LCD_BUS_SPI_RS LCD_BUS_I2C_RS
wim 38:cbe275b0b647 241 #define LCD_BUS_SPI_RW LCD_BUS_I2C_RW
wim 38:cbe275b0b647 242 #define LCD_BUS_SPI_E LCD_BUS_I2C_E
wim 38:cbe275b0b647 243 #define LCD_BUS_SPI_BL LCD_BUS_I2C_BL
wim 38:cbe275b0b647 244 #define LCD_BUS_SPI_D4 LCD_BUS_I2C_D4
wim 38:cbe275b0b647 245 #define LCD_BUS_SPI_D5 LCD_BUS_I2C_D5
wim 38:cbe275b0b647 246 #define LCD_BUS_SPI_D6 LCD_BUS_I2C_D6
wim 38:cbe275b0b647 247 #define LCD_BUS_SPI_D7 LCD_BUS_I2C_D7
wim 38:cbe275b0b647 248
wim 38:cbe275b0b647 249 #define LCD_BUS_SPI_E2 LCD_BUS_I2C_E2
wim 34:e5a0dcb43ecc 250
wim 34:e5a0dcb43ecc 251 //Force I2C portexpander type
wim 34:e5a0dcb43ecc 252 #define PCF8574 1
wim 34:e5a0dcb43ecc 253 #define MCP23008 0
wim 35:311be6444a39 254
wim 35:311be6444a39 255 //Inverted Backlight control
wim 35:311be6444a39 256 #define BACKLIGHT_INV 0
wim 34:e5a0dcb43ecc 257 #endif
wim 34:e5a0dcb43ecc 258
wim 39:e9c2319de9c5 259 #if ((GYLCD==1) || (MJKDZ==1))
wim 39:e9c2319de9c5 260 //Definitions for Arduino-IIC-LCD GY-LCD-V1, for GY-IICLCD and for MJKDZ Module mapping between serial port expander pins and LCD controller.
wim 35:311be6444a39 261 //Very similar to DFROBOT. This hardware uses PCF8574.
wim 35:311be6444a39 262 //Slaveaddress may be set by solderbridges (default 0x4E). SDA/SCL has pullup Resistors onboard.
wim 35:311be6444a39 263 //See http://arduino-info.wikispaces.com/LCD-Blue-I2C
wim 35:311be6444a39 264 //
wim 35:311be6444a39 265 //Note: LCD RW pin must be kept LOW
wim 35:311be6444a39 266 // E2 is not available on default hardware and so it does not support LCD40x4 (second controller)
wim 35:311be6444a39 267 // BL is used to control backlight, reverse logic: Low turns on Backlight. This is handled in setBacklight()
wim 38:cbe275b0b647 268
wim 38:cbe275b0b647 269 //I2C bus expander PCF8574 interface
wim 38:cbe275b0b647 270 #define LCD_BUS_I2C_D4 (1 << 0)
wim 38:cbe275b0b647 271 #define LCD_BUS_I2C_D5 (1 << 1)
wim 38:cbe275b0b647 272 #define LCD_BUS_I2C_D6 (1 << 2)
wim 38:cbe275b0b647 273 #define LCD_BUS_I2C_D7 (1 << 3)
wim 38:cbe275b0b647 274 #define LCD_BUS_I2C_E (1 << 4)
wim 38:cbe275b0b647 275 #define LCD_BUS_I2C_RW (1 << 5)
wim 38:cbe275b0b647 276 #define LCD_BUS_I2C_RS (1 << 6)
wim 38:cbe275b0b647 277 #define LCD_BUS_I2C_BL (1 << 7)
wim 35:311be6444a39 278
wim 38:cbe275b0b647 279 #define LCD_BUS_I2C_E2 (1 << 5)
wim 38:cbe275b0b647 280
wim 38:cbe275b0b647 281 //SPI bus expander (74595) interface
wim 38:cbe275b0b647 282 #define LCD_BUS_SPI_D4 LCD_BUS_I2C_D4
wim 38:cbe275b0b647 283 #define LCD_BUS_SPI_D5 LCD_BUS_I2C_D5
wim 38:cbe275b0b647 284 #define LCD_BUS_SPI_D6 LCD_BUS_I2C_D6
wim 38:cbe275b0b647 285 #define LCD_BUS_SPI_D7 LCD_BUS_I2C_D7
wim 38:cbe275b0b647 286 #define LCD_BUS_SPI_E LCD_BUS_I2C_E
wim 38:cbe275b0b647 287 #define LCD_BUS_SPI_RW LCD_BUS_I2C_RW
wim 38:cbe275b0b647 288 #define LCD_BUS_SPI_RS LCD_BUS_I2C_RS
wim 38:cbe275b0b647 289 #define LCD_BUS_SPI_BL LCD_BUS_I2C_BL
wim 38:cbe275b0b647 290
wim 38:cbe275b0b647 291 #define LCD_BUS_SPI_E2 LCD_BUS_I2C_E2
wim 35:311be6444a39 292
wim 35:311be6444a39 293 //Force I2C portexpander type
wim 35:311be6444a39 294 #define PCF8574 1
wim 35:311be6444a39 295 #define MCP23008 0
wim 35:311be6444a39 296
wim 35:311be6444a39 297 //Force Inverted Backlight control
wim 35:311be6444a39 298 #define BACKLIGHT_INV 1
wim 35:311be6444a39 299 #endif
wim 35:311be6444a39 300
wim 35:311be6444a39 301 #if (SYDZ==1)
wim 35:311be6444a39 302 //Definitions for SYDZ Module mapping between serial port expander pins and LCD controller.
wim 38:cbe275b0b647 303 //Very similar to DFROBOT. This hardware uses PCF8574A.
wim 38:cbe275b0b647 304 //Slaveaddress may be set by switches (default 0x70). SDA/SCL has pullup Resistors onboard.
wim 35:311be6444a39 305 //See ebay
wim 35:311be6444a39 306 //
wim 35:311be6444a39 307 //Note: LCD RW pin must be kept LOW
wim 35:311be6444a39 308 // E2 is not available on default hardware and so it does not support LCD40x4 (second controller)
wim 38:cbe275b0b647 309 // BL is used to control backlight
wim 38:cbe275b0b647 310
wim 38:cbe275b0b647 311 //I2C bus expander PCF8574A interface
wim 38:cbe275b0b647 312 #define LCD_BUS_I2C_RS (1 << 0)
wim 38:cbe275b0b647 313 #define LCD_BUS_I2C_RW (1 << 1)
wim 38:cbe275b0b647 314 #define LCD_BUS_I2C_E (1 << 2)
wim 38:cbe275b0b647 315 #define LCD_BUS_I2C_BL (1 << 3)
wim 38:cbe275b0b647 316 #define LCD_BUS_I2C_D4 (1 << 4)
wim 38:cbe275b0b647 317 #define LCD_BUS_I2C_D5 (1 << 5)
wim 38:cbe275b0b647 318 #define LCD_BUS_I2C_D6 (1 << 6)
wim 38:cbe275b0b647 319 #define LCD_BUS_I2C_D7 (1 << 7)
wim 35:311be6444a39 320
wim 38:cbe275b0b647 321 #define LCD_BUS_I2C_E2 (1 << 1)
wim 38:cbe275b0b647 322
wim 38:cbe275b0b647 323 //SPI bus expander (74595) interface, same as I2C
wim 38:cbe275b0b647 324 #define LCD_BUS_SPI_RS LCD_BUS_I2C_RS
wim 38:cbe275b0b647 325 #define LCD_BUS_SPI_RW LCD_BUS_I2C_RW
wim 38:cbe275b0b647 326 #define LCD_BUS_SPI_E LCD_BUS_I2C_E
wim 38:cbe275b0b647 327 #define LCD_BUS_SPI_BL LCD_BUS_I2C_BL
wim 38:cbe275b0b647 328 #define LCD_BUS_SPI_D4 LCD_BUS_I2C_D4
wim 38:cbe275b0b647 329 #define LCD_BUS_SPI_D5 LCD_BUS_I2C_D5
wim 38:cbe275b0b647 330 #define LCD_BUS_SPI_D6 LCD_BUS_I2C_D6
wim 38:cbe275b0b647 331 #define LCD_BUS_SPI_D7 LCD_BUS_I2C_D7
wim 38:cbe275b0b647 332
wim 38:cbe275b0b647 333 #define LCD_BUS_SPI_E2 LCD_BUS_I2C_E2
wim 35:311be6444a39 334
wim 35:311be6444a39 335 //Force I2C portexpander type
wim 35:311be6444a39 336 #define PCF8574 1
wim 35:311be6444a39 337 #define MCP23008 0
wim 35:311be6444a39 338
wim 35:311be6444a39 339 //Force Inverted Backlight control
wim 38:cbe275b0b647 340 #define BACKLIGHT_INV 0
wim 35:311be6444a39 341 #endif
wim 34:e5a0dcb43ecc 342
wim 39:e9c2319de9c5 343 #if (WIDEHK==1)
wim 39:e9c2319de9c5 344 //Definitions for WIDE.HK I2C backpack mapping between serial port expander pins and LCD controller
wim 39:e9c2319de9c5 345 //This hardware uses an MCP23008 I2C expander.
wim 39:e9c2319de9c5 346 //Slaveaddress is hardcoded at 0x4E. SDA/SCL has pullup Resistors onboard (3k3).
wim 39:e9c2319de9c5 347 //See http://www.wide.hk
wim 39:e9c2319de9c5 348 //
wim 39:e9c2319de9c5 349 //Note: LCD RW pin must be kept LOW
wim 39:e9c2319de9c5 350 // E2 is not available on this hardware and so it does not support LCD40x4 (second controller)
wim 39:e9c2319de9c5 351 // BL is used to control backlight
wim 39:e9c2319de9c5 352 //
wim 39:e9c2319de9c5 353
wim 39:e9c2319de9c5 354 //I2C bus expander (MCP23008) interface
wim 39:e9c2319de9c5 355 #define LCD_BUS_I2C_D4 (1 << 0)
wim 39:e9c2319de9c5 356 #define LCD_BUS_I2C_D5 (1 << 1)
wim 39:e9c2319de9c5 357 #define LCD_BUS_I2C_D6 (1 << 2)
wim 39:e9c2319de9c5 358 #define LCD_BUS_I2C_D7 (1 << 3)
wim 39:e9c2319de9c5 359 #define LCD_BUS_I2C_RS (1 << 4)
wim 39:e9c2319de9c5 360 #define LCD_BUS_I2C_RW (1 << 5)
wim 39:e9c2319de9c5 361 #define LCD_BUS_I2C_BL (1 << 6)
wim 39:e9c2319de9c5 362 #define LCD_BUS_I2C_E (1 << 7)
wim 39:e9c2319de9c5 363
wim 39:e9c2319de9c5 364 #define LCD_BUS_I2C_E2 (1 << 5)
wim 39:e9c2319de9c5 365
wim 39:e9c2319de9c5 366 //SPI bus expander (74595) interface, same as I2C
wim 39:e9c2319de9c5 367 #define LCD_BUS_SPI_D4 LCD_BUS_I2C_D4
wim 39:e9c2319de9c5 368 #define LCD_BUS_SPI_D5 LCD_BUS_I2C_D5
wim 39:e9c2319de9c5 369 #define LCD_BUS_SPI_D6 LCD_BUS_I2C_D6
wim 39:e9c2319de9c5 370 #define LCD_BUS_SPI_D7 LCD_BUS_I2C_D7
wim 39:e9c2319de9c5 371 #define LCD_BUS_SPI_RS LCD_BUS_I2C_RS
wim 39:e9c2319de9c5 372 #define LCD_BUS_SPI_RW LCD_BUS_I2C_RW
wim 39:e9c2319de9c5 373 #define LCD_BUS_SPI_BL LCD_BUS_I2C_BL
wim 39:e9c2319de9c5 374 #define LCD_BUS_SPI_E LCD_BUS_I2C_E
wim 39:e9c2319de9c5 375
wim 39:e9c2319de9c5 376 #define LCD_BUS_SPI_E2 LCD_BUS_I2C_E2
wim 39:e9c2319de9c5 377
wim 39:e9c2319de9c5 378 //Force I2C portexpander type
wim 39:e9c2319de9c5 379 #define PCF8574 0
wim 39:e9c2319de9c5 380 #define MCP23008 1
wim 39:e9c2319de9c5 381
wim 39:e9c2319de9c5 382 //Inverted Backlight control
wim 39:e9c2319de9c5 383 #define BACKLIGHT_INV 0
wim 39:e9c2319de9c5 384 #endif
wim 39:e9c2319de9c5 385
wim 39:e9c2319de9c5 386 #if (LCDPLUG==1)
wim 39:e9c2319de9c5 387 //Definitions for Jeelabs LCD_Plug I2C backpack mapping between serial port expander pins and LCD controller
wim 39:e9c2319de9c5 388 //This hardware uses an MCP23008 I2C expander.
wim 39:e9c2319de9c5 389 //Slaveaddress is hardcoded at 0x48. SDA/SCL has no pullup Resistors onboard.
wim 39:e9c2319de9c5 390 //See http://jeelabs.net/projects/hardware/wiki/lcd_plug
wim 39:e9c2319de9c5 391 //
wim 39:e9c2319de9c5 392 //Note: LCD RW pin must be kept LOW
wim 39:e9c2319de9c5 393 // E2 is available on a plug and so it does support LCD40x4 (second controller)
wim 39:e9c2319de9c5 394 // BL is used to control backlight
wim 39:e9c2319de9c5 395 //
wim 39:e9c2319de9c5 396
wim 39:e9c2319de9c5 397 //I2C bus expander (MCP23008) interface
wim 39:e9c2319de9c5 398 #define LCD_BUS_I2C_D4 (1 << 0)
wim 39:e9c2319de9c5 399 #define LCD_BUS_I2C_D5 (1 << 1)
wim 39:e9c2319de9c5 400 #define LCD_BUS_I2C_D6 (1 << 2)
wim 39:e9c2319de9c5 401 #define LCD_BUS_I2C_D7 (1 << 3)
wim 39:e9c2319de9c5 402 #define LCD_BUS_I2C_RS (1 << 4)
wim 39:e9c2319de9c5 403 #define LCD_BUS_I2C_E2 (1 << 5)
wim 39:e9c2319de9c5 404 #define LCD_BUS_I2C_E (1 << 6)
wim 39:e9c2319de9c5 405 #define LCD_BUS_I2C_BL (1 << 7)
wim 39:e9c2319de9c5 406
wim 39:e9c2319de9c5 407 #define LCD_BUS_I2C_RW (1 << 5)
wim 39:e9c2319de9c5 408
wim 39:e9c2319de9c5 409 //SPI bus expander (74595) interface, same as I2C
wim 39:e9c2319de9c5 410 #define LCD_BUS_SPI_D4 LCD_BUS_I2C_D4
wim 39:e9c2319de9c5 411 #define LCD_BUS_SPI_D5 LCD_BUS_I2C_D5
wim 39:e9c2319de9c5 412 #define LCD_BUS_SPI_D6 LCD_BUS_I2C_D6
wim 39:e9c2319de9c5 413 #define LCD_BUS_SPI_D7 LCD_BUS_I2C_D7
wim 39:e9c2319de9c5 414 #define LCD_BUS_SPI_RS LCD_BUS_I2C_RS
wim 39:e9c2319de9c5 415 #define LCD_BUS_SPI_E2 LCD_BUS_I2C_E2
wim 39:e9c2319de9c5 416 #define LCD_BUS_SPI_E LCD_BUS_I2C_E
wim 39:e9c2319de9c5 417 #define LCD_BUS_SPI_BL LCD_BUS_I2C_BL
wim 39:e9c2319de9c5 418
wim 39:e9c2319de9c5 419 #define LCD_BUS_SPI_RW LCD_BUS_I2C_RW
wim 39:e9c2319de9c5 420
wim 39:e9c2319de9c5 421 //Force I2C portexpander type
wim 39:e9c2319de9c5 422 #define PCF8574 0
wim 39:e9c2319de9c5 423 #define MCP23008 1
wim 39:e9c2319de9c5 424
wim 39:e9c2319de9c5 425 //Inverted Backlight control
wim 39:e9c2319de9c5 426 #define BACKLIGHT_INV 0
wim 39:e9c2319de9c5 427 #endif
wim 39:e9c2319de9c5 428
wim 39:e9c2319de9c5 429
wim 34:e5a0dcb43ecc 430 //Bitpattern Defines for I2C PCF8574/PCF8574A, MCP23008 and SPI 74595 Bus expanders
wim 37:ce348c002929 431 //Don't change!
wim 38:cbe275b0b647 432 #define LCD_BUS_I2C_MSK (LCD_BUS_I2C_D4 | LCD_BUS_I2C_D5 | LCD_BUS_I2C_D6 | LCD_BUS_I2C_D7)
wim 38:cbe275b0b647 433 #if (BACKLIGHT_INV == 1)
wim 38:cbe275b0b647 434 #define LCD_BUS_I2C_DEF (0x00 | LCD_BUS_I2C_BL)
wim 38:cbe275b0b647 435 #else
wim 38:cbe275b0b647 436 #define LCD_BUS_I2C_DEF 0x00
wim 38:cbe275b0b647 437 #endif
wim 34:e5a0dcb43ecc 438
wim 38:cbe275b0b647 439 #define LCD_BUS_SPI_MSK (LCD_BUS_SPI_D4 | LCD_BUS_SPI_D5 | LCD_BUS_SPI_D6 | LCD_BUS_SPI_D7)
wim 38:cbe275b0b647 440 #if (BACKLIGHT_INV == 1)
wim 38:cbe275b0b647 441 #define LCD_BUS_SPI_DEF (0x00 | LCD_BUS_SPI_BL)
wim 38:cbe275b0b647 442 #else
wim 38:cbe275b0b647 443 #define LCD_BUS_SPI_DEF 0x00
wim 38:cbe275b0b647 444 #endif
wim 38:cbe275b0b647 445
wim 34:e5a0dcb43ecc 446
wim 34:e5a0dcb43ecc 447 /* PCF8574/PCF8574A I2C portexpander slave address */
wim 34:e5a0dcb43ecc 448 #define PCF8574_SA0 0x40
wim 34:e5a0dcb43ecc 449 #define PCF8574_SA1 0x42
wim 34:e5a0dcb43ecc 450 #define PCF8574_SA2 0x44
wim 34:e5a0dcb43ecc 451 #define PCF8574_SA3 0x46
wim 34:e5a0dcb43ecc 452 #define PCF8574_SA4 0x48
wim 34:e5a0dcb43ecc 453 #define PCF8574_SA5 0x4A
wim 34:e5a0dcb43ecc 454 #define PCF8574_SA6 0x4C
wim 34:e5a0dcb43ecc 455 #define PCF8574_SA7 0x4E
wim 34:e5a0dcb43ecc 456
wim 34:e5a0dcb43ecc 457 #define PCF8574A_SA0 0x70
wim 34:e5a0dcb43ecc 458 #define PCF8574A_SA1 0x72
wim 34:e5a0dcb43ecc 459 #define PCF8574A_SA2 0x74
wim 34:e5a0dcb43ecc 460 #define PCF8574A_SA3 0x76
wim 34:e5a0dcb43ecc 461 #define PCF8574A_SA4 0x78
wim 34:e5a0dcb43ecc 462 #define PCF8574A_SA5 0x7A
wim 34:e5a0dcb43ecc 463 #define PCF8574A_SA6 0x7C
wim 34:e5a0dcb43ecc 464 #define PCF8574A_SA7 0x7E
wim 34:e5a0dcb43ecc 465
wim 34:e5a0dcb43ecc 466 /* MCP23008 I2C portexpander slave address */
wim 34:e5a0dcb43ecc 467 #define MCP23008_SA0 0x40
wim 34:e5a0dcb43ecc 468 #define MCP23008_SA1 0x42
wim 34:e5a0dcb43ecc 469 #define MCP23008_SA2 0x44
wim 34:e5a0dcb43ecc 470 #define MCP23008_SA3 0x46
wim 34:e5a0dcb43ecc 471 #define MCP23008_SA4 0x48
wim 34:e5a0dcb43ecc 472 #define MCP23008_SA5 0x4A
wim 34:e5a0dcb43ecc 473 #define MCP23008_SA6 0x4C
wim 34:e5a0dcb43ecc 474 #define MCP23008_SA7 0x4E
wim 34:e5a0dcb43ecc 475
wim 34:e5a0dcb43ecc 476 /* MCP23008 I2C portexpander internal registers */
wim 34:e5a0dcb43ecc 477 #define IODIR 0x00
wim 34:e5a0dcb43ecc 478 #define IPOL 0x01
wim 34:e5a0dcb43ecc 479 #define GPINTEN 0x02
wim 34:e5a0dcb43ecc 480 #define DEFVAL 0x03
wim 34:e5a0dcb43ecc 481 #define INTCON 0x04
wim 34:e5a0dcb43ecc 482 #define IOCON 0x05
wim 34:e5a0dcb43ecc 483 #define GPPU 0x06
wim 34:e5a0dcb43ecc 484 #define INTF 0x07
wim 34:e5a0dcb43ecc 485 #define INTCAP 0x08
wim 34:e5a0dcb43ecc 486 #define GPIO 0x09
wim 34:e5a0dcb43ecc 487 #define OLAT 0x0A
wim 34:e5a0dcb43ecc 488
wim 34:e5a0dcb43ecc 489 /* ST7032i I2C slave address */
wim 34:e5a0dcb43ecc 490 #define ST7032_SA 0x7C
wim 34:e5a0dcb43ecc 491
wim 34:e5a0dcb43ecc 492 /* ST7036i I2C slave address */
wim 34:e5a0dcb43ecc 493 #define ST7036_SA0 0x78
wim 34:e5a0dcb43ecc 494 #define ST7036_SA1 0x7A
wim 34:e5a0dcb43ecc 495 #define ST7036_SA2 0x7C
wim 34:e5a0dcb43ecc 496 #define ST7036_SA3 0x7E
wim 34:e5a0dcb43ecc 497
wim 37:ce348c002929 498 /* ST7066_ACM I2C slave address, Added for ACM1602 module */
wim 37:ce348c002929 499 #define ST7066_SA0 0xA0
wim 37:ce348c002929 500
wim 34:e5a0dcb43ecc 501 /* PCF21XX I2C slave address */
wim 34:e5a0dcb43ecc 502 #define PCF21XX_SA0 0x74
wim 34:e5a0dcb43ecc 503 #define PCF21XX_SA1 0x76
wim 34:e5a0dcb43ecc 504
wim 34:e5a0dcb43ecc 505 /* AIP31068 I2C slave address */
wim 34:e5a0dcb43ecc 506 #define AIP31068_SA 0x7C
wim 34:e5a0dcb43ecc 507
wim 34:e5a0dcb43ecc 508 /* SSD1803 I2C slave address */
wim 34:e5a0dcb43ecc 509 #define SSD1803_SA0 0x78
wim 34:e5a0dcb43ecc 510 #define SSD1803_SA1 0x7A
wim 34:e5a0dcb43ecc 511
wim 34:e5a0dcb43ecc 512 /* US2066/SSD1311 I2C slave address */
wim 34:e5a0dcb43ecc 513 #define US2066_SA0 0x78
wim 34:e5a0dcb43ecc 514 #define US2066_SA1 0x7A
wim 34:e5a0dcb43ecc 515
wim 34:e5a0dcb43ecc 516 /* AC780 I2C slave address */
wim 34:e5a0dcb43ecc 517 #define AC780_SA0 0x78
wim 34:e5a0dcb43ecc 518 #define AC780_SA1 0x7A
wim 34:e5a0dcb43ecc 519 #define AC780_SA2 0x7C
wim 34:e5a0dcb43ecc 520 #define AC780_SA3 0x7E
wim 34:e5a0dcb43ecc 521
wim 41:111ca62e8a59 522 /* SPLC792A is clone of ST7032i */
wim 41:111ca62e8a59 523 #define SPLC792A_SA0 0x78
wim 41:111ca62e8a59 524 #define SPLC792A_SA1 0x7A
wim 41:111ca62e8a59 525 #define SPLC792A_SA2 0x7C
wim 41:111ca62e8a59 526 #define SPLC792A_SA3 0x7E
wim 41:111ca62e8a59 527
wim 34:e5a0dcb43ecc 528 //Some native I2C controllers dont support ACK. Set define to '0' to allow code to proceed even without ACK
wim 34:e5a0dcb43ecc 529 //#define LCD_I2C_ACK 0
wim 34:e5a0dcb43ecc 530 #define LCD_I2C_ACK 1
wim 34:e5a0dcb43ecc 531
wim 34:e5a0dcb43ecc 532
wim 34:e5a0dcb43ecc 533 // Contrast setting, 6 significant bits (only supported for controllers with extended features)
wim 34:e5a0dcb43ecc 534 // Voltage Multiplier setting, 2 or 3 significant bits (only supported for controllers with extended features)
wim 34:e5a0dcb43ecc 535 #define LCD_DEF_CONTRAST 0x20
wim 34:e5a0dcb43ecc 536
wim 34:e5a0dcb43ecc 537 //ST7032 EastRising ERC1602FS-4 display
wim 41:111ca62e8a59 538 //Contrast setting 6 significant bits (0..63)
wim 41:111ca62e8a59 539 //Voltage Multiplier setting 3 significant bits:
wim 41:111ca62e8a59 540 // 0: 1.818V
wim 41:111ca62e8a59 541 // 1: 2.222V
wim 41:111ca62e8a59 542 // 2: 2.667V
wim 41:111ca62e8a59 543 // 3: 3.333V
wim 41:111ca62e8a59 544 // 4: 3.636V (ST7032 default)
wim 41:111ca62e8a59 545 // 5: 4.000V
wim 41:111ca62e8a59 546 // 6: 4.444V
wim 41:111ca62e8a59 547 // 7: 5.000V
wim 37:ce348c002929 548 #define LCD_ST7032_CONTRAST 0x28
wim 34:e5a0dcb43ecc 549 #define LCD_ST7032_RAB 0x04
wim 34:e5a0dcb43ecc 550
wim 34:e5a0dcb43ecc 551 //ST7036 EA DOGM1603 display
wim 34:e5a0dcb43ecc 552 //Contrast setting 6 significant bits
wim 34:e5a0dcb43ecc 553 //Voltage Multiplier setting 3 significant bits
wim 34:e5a0dcb43ecc 554 #define LCD_ST7036_CONTRAST 0x28
wim 34:e5a0dcb43ecc 555 #define LCD_ST7036_RAB 0x04
wim 34:e5a0dcb43ecc 556
wim 34:e5a0dcb43ecc 557 //SSD1803 EA DOGM204 display
wim 34:e5a0dcb43ecc 558 //Contrast setting 6 significant bits
wim 34:e5a0dcb43ecc 559 //Voltage Multiplier setting 3 significant bits
wim 34:e5a0dcb43ecc 560 #define LCD_SSD1_CONTRAST 0x28
wim 34:e5a0dcb43ecc 561 #define LCD_SSD1_RAB 0x06
wim 34:e5a0dcb43ecc 562
wim 34:e5a0dcb43ecc 563 //US2066/SSD1311 EastRising ER-OLEDM2002-4 display
wim 34:e5a0dcb43ecc 564 //Contrast setting 8 significant bits, use 6 for compatibility
wim 34:e5a0dcb43ecc 565 #define LCD_US20_CONTRAST 0x3F
wim 34:e5a0dcb43ecc 566 //#define LCD_US20_CONTRAST 0x1F
wim 34:e5a0dcb43ecc 567
wim 34:e5a0dcb43ecc 568 //PCF2113, PCF2119 display
wim 34:e5a0dcb43ecc 569 //Contrast setting 6 significant bits
wim 34:e5a0dcb43ecc 570 //Voltage Multiplier setting 2 significant bits
wim 34:e5a0dcb43ecc 571 #define LCD_PCF2_CONTRAST 0x20
wim 34:e5a0dcb43ecc 572 #define LCD_PCF2_S12 0x02
wim 34:e5a0dcb43ecc 573
wim 34:e5a0dcb43ecc 574 //PT6314 VFD display
wim 34:e5a0dcb43ecc 575 //Contrast setting 2 significant bits, use 6 for compatibility
wim 34:e5a0dcb43ecc 576 #define LCD_PT63_CONTRAST 0x3F
wim 34:e5a0dcb43ecc 577
wim 41:111ca62e8a59 578 //SPLC792A is clone of ST7032i
wim 41:111ca62e8a59 579 //Contrast setting 6 significant bits (0..63)
wim 41:111ca62e8a59 580 //Voltage Multiplier setting 3 significant bits:
wim 41:111ca62e8a59 581 // 0: 1.818V
wim 41:111ca62e8a59 582 // 1: 2.222V
wim 41:111ca62e8a59 583 // 2: 2.667V
wim 41:111ca62e8a59 584 // 3: 3.333V (SPLC792A default)
wim 41:111ca62e8a59 585 // 4: 3.636V
wim 41:111ca62e8a59 586 // 5: 4.000V
wim 41:111ca62e8a59 587 // 6: 4.444V
wim 41:111ca62e8a59 588 // 7: 5.000V
wim 41:111ca62e8a59 589 #define LCD_SPLC792A_CONTRAST 0x28
wim 41:111ca62e8a59 590 #define LCD_SPLC792A_RAB 0x04
wim 34:e5a0dcb43ecc 591
wim 34:e5a0dcb43ecc 592 #endif //MBED_TEXTLCDCONFIG_H