sfas
Dependents: Bracky-MPU6050-DMP
Fork of MPU6050 by
MPU6050_6Axis_MotionApps20.h
- Committer:
- syundo0730
- Date:
- 2013-11-20
- Revision:
- 4:a1c169138c71
- Parent:
- 3:25e1a5a10e53
- Child:
- 5:7d1bf3ce0053
File content as of revision 4:a1c169138c71:
// I2Cdev library collection - MPU6050 I2C device class, 6-axis MotionApps 2.0 implementation // Based on InvenSense MPU-6050 register map document rev. 2.0, 5/19/2011 (RM-MPU-6000A-00) // 5/20/2013 by Jeff Rowberg <jeff@rowberg.net> // Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib // // Changelog: // ... - ongoing debug release /* ============================================ I2Cdev device library code is placed under the MIT license Copyright (c) 2012 Jeff Rowberg Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. =============================================== */ #ifndef _MPU6050_6AXIS_MOTIONAPPS20_H_ #define _MPU6050_6AXIS_MOTIONAPPS20_H_ #include <iostream> #include "I2Cdev.h" #include "helper_3dmath.h" // MotionApps 2.0 DMP implementation, built using the MPU-6050EVB evaluation board #define MPU6050_INCLUDE_DMP_MOTIONAPPS20 #include "MPU6050.h" // Tom Carpenter's conditional PROGMEM code // http://forum.arduino.cc/index.php?topic=129407.0 #ifndef __arm__ #include <avr/pgmspace.h> #else // Teensy 3.0 library conditional PROGMEM code from Paul Stoffregen #ifndef __PGMSPACE_H_ #define __PGMSPACE_H_ 1 #include <inttypes.h> #define PROGMEM #define PGM_P const char * #define PSTR(str) (str) #define F(x) x typedef void prog_void; typedef char prog_char; typedef unsigned char prog_uchar; typedef int8_t prog_int8_t; typedef uint8_t prog_uint8_t; typedef int16_t prog_int16_t; typedef uint16_t prog_uint16_t; typedef int32_t prog_int32_t; typedef uint32_t prog_uint32_t; #define strcpy_P(dest, src) strcpy((dest), (src)) #define strcat_P(dest, src) strcat((dest), (src)) #define strcmp_P(a, b) strcmp((a), (b)) #define pgm_read_byte(addr) (*(const unsigned char *)(addr)) #define pgm_read_word(addr) (*(const unsigned short *)(addr)) #define pgm_read_dword(addr) (*(const unsigned long *)(addr)) #define pgm_read_float(addr) (*(const float *)(addr)) #define pgm_read_byte_near(addr) pgm_read_byte(addr) #define pgm_read_word_near(addr) pgm_read_word(addr) #define pgm_read_dword_near(addr) pgm_read_dword(addr) #define pgm_read_float_near(addr) pgm_read_float(addr) #define pgm_read_byte_far(addr) pgm_read_byte(addr) #define pgm_read_word_far(addr) pgm_read_word(addr) #define pgm_read_dword_far(addr) pgm_read_dword(addr) #define pgm_read_float_far(addr) pgm_read_float(addr) #endif #endif /* Source is from the InvenSense MotionApps v2 demo code. Original source is * unavailable, unless you happen to be amazing as decompiling binary by * hand (in which case, please contact me, and I'm totally serious). * * Also, I'd like to offer many, many thanks to Noah Zerkin for all of the * DMP reverse-engineering he did to help make this bit of wizardry * possible. */ // NOTE! Enabling DEBUG adds about 3.3kB to the flash program size. // Debug output is now working even on ATMega328P MCUs (e.g. Arduino Uno) // after moving string constants to flash memory storage using the F() // compiler macro (Arduino IDE 1.0+ required). #define DEBUG #ifdef DEBUG #define DEBUG_PRINT(x) std::cout << x //Serial.print(x) #define DEBUG_PRINTF(x, y) std::cout << x //Serial.print(x, y) #define DEBUG_PRINTLN(x) std::cout << x << std::endl //Serial.println(x) #define DEBUG_PRINTLNF(x, y) std::cout << x << std::endl //Serial.println(x, y) #define F(x) x #else #define DEBUG_PRINT(x) #define DEBUG_PRINTF(x, y) #define DEBUG_PRINTLN(x) #define DEBUG_PRINTLNF(x, y) #endif #define MPU6050_DMP_CODE_SIZE 1929 // dmpMemory[] #define MPU6050_DMP_CONFIG_SIZE 192 // dmpConfig[] #define MPU6050_DMP_UPDATES_SIZE 47 // dmpUpdates[] /* ================================================================================================ * | Default MotionApps v2.0 42-byte FIFO packet structure: | | | | [QUAT W][ ][QUAT X][ ][QUAT Y][ ][QUAT Z][ ][GYRO X][ ][GYRO Y][ ] | | 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 | | | | [GYRO Z][ ][ACC X ][ ][ACC Y ][ ][ACC Z ][ ][ ] | | 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 | * ================================================================================================ */ // this block of memory gets written to the MPU on start-up, and it seems // to be volatile memory, so it has to be done each time (it only takes ~1 // second though) const unsigned char dmpMemory[MPU6050_DMP_CODE_SIZE] PROGMEM = { // bank 0, 256 bytes 0xFB, 0x00, 0x00, 0x3E, 0x00, 0x0B, 0x00, 0x36, 0x00, 0x01, 0x00, 0x02, 0x00, 0x03, 0x00, 0x00, 0x00, 0x65, 0x00, 0x54, 0xFF, 0xEF, 0x00, 0x00, 0xFA, 0x80, 0x00, 0x0B, 0x12, 0x82, 0x00, 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x00, 0xFF, 0xFF, 0x45, 0x81, 0xFF, 0xFF, 0xFA, 0x72, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xE8, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 0x7F, 0xFF, 0xFF, 0xFE, 0x80, 0x01, 0x00, 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x03, 0x30, 0x40, 0x00, 0x00, 0x00, 0x02, 0xCA, 0xE3, 0x09, 0x3E, 0x80, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x41, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x0B, 0x2A, 0x00, 0x00, 0x16, 0x55, 0x00, 0x00, 0x21, 0x82, 0xFD, 0x87, 0x26, 0x50, 0xFD, 0x80, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x05, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x6F, 0x00, 0x02, 0x65, 0x32, 0x00, 0x00, 0x5E, 0xC0, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFB, 0x8C, 0x6F, 0x5D, 0xFD, 0x5D, 0x08, 0xD9, 0x00, 0x7C, 0x73, 0x3B, 0x00, 0x6C, 0x12, 0xCC, 0x32, 0x00, 0x13, 0x9D, 0x32, 0x00, 0xD0, 0xD6, 0x32, 0x00, 0x08, 0x00, 0x40, 0x00, 0x01, 0xF4, 0xFF, 0xE6, 0x80, 0x79, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0xD0, 0xD6, 0x00, 0x00, 0x27, 0x10, // bank 1, 256 bytes 0xFB, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFA, 0x36, 0xFF, 0xBC, 0x30, 0x8E, 0x00, 0x05, 0xFB, 0xF0, 0xFF, 0xD9, 0x5B, 0xC8, 0xFF, 0xD0, 0x9A, 0xBE, 0x00, 0x00, 0x10, 0xA9, 0xFF, 0xF4, 0x1E, 0xB2, 0x00, 0xCE, 0xBB, 0xF7, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x04, 0x00, 0x02, 0x00, 0x02, 0x02, 0x00, 0x00, 0x0C, 0xFF, 0xC2, 0x80, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0xCF, 0x80, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x3F, 0x68, 0xB6, 0x79, 0x35, 0x28, 0xBC, 0xC6, 0x7E, 0xD1, 0x6C, 0x80, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0xB2, 0x6A, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xF0, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x25, 0x4D, 0x00, 0x2F, 0x70, 0x6D, 0x00, 0x00, 0x05, 0xAE, 0x00, 0x0C, 0x02, 0xD0, // bank 2, 256 bytes 0x00, 0x00, 0x00, 0x00, 0x00, 0x65, 0x00, 0x54, 0xFF, 0xEF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x65, 0x00, 0x00, 0x00, 0x54, 0x00, 0x00, 0xFF, 0xEF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // bank 3, 256 bytes 0xD8, 0xDC, 0xBA, 0xA2, 0xF1, 0xDE, 0xB2, 0xB8, 0xB4, 0xA8, 0x81, 0x91, 0xF7, 0x4A, 0x90, 0x7F, 0x91, 0x6A, 0xF3, 0xF9, 0xDB, 0xA8, 0xF9, 0xB0, 0xBA, 0xA0, 0x80, 0xF2, 0xCE, 0x81, 0xF3, 0xC2, 0xF1, 0xC1, 0xF2, 0xC3, 0xF3, 0xCC, 0xA2, 0xB2, 0x80, 0xF1, 0xC6, 0xD8, 0x80, 0xBA, 0xA7, 0xDF, 0xDF, 0xDF, 0xF2, 0xA7, 0xC3, 0xCB, 0xC5, 0xB6, 0xF0, 0x87, 0xA2, 0x94, 0x24, 0x48, 0x70, 0x3C, 0x95, 0x40, 0x68, 0x34, 0x58, 0x9B, 0x78, 0xA2, 0xF1, 0x83, 0x92, 0x2D, 0x55, 0x7D, 0xD8, 0xB1, 0xB4, 0xB8, 0xA1, 0xD0, 0x91, 0x80, 0xF2, 0x70, 0xF3, 0x70, 0xF2, 0x7C, 0x80, 0xA8, 0xF1, 0x01, 0xB0, 0x98, 0x87, 0xD9, 0x43, 0xD8, 0x86, 0xC9, 0x88, 0xBA, 0xA1, 0xF2, 0x0E, 0xB8, 0x97, 0x80, 0xF1, 0xA9, 0xDF, 0xDF, 0xDF, 0xAA, 0xDF, 0xDF, 0xDF, 0xF2, 0xAA, 0xC5, 0xCD, 0xC7, 0xA9, 0x0C, 0xC9, 0x2C, 0x97, 0x97, 0x97, 0x97, 0xF1, 0xA9, 0x89, 0x26, 0x46, 0x66, 0xB0, 0xB4, 0xBA, 0x80, 0xAC, 0xDE, 0xF2, 0xCA, 0xF1, 0xB2, 0x8C, 0x02, 0xA9, 0xB6, 0x98, 0x00, 0x89, 0x0E, 0x16, 0x1E, 0xB8, 0xA9, 0xB4, 0x99, 0x2C, 0x54, 0x7C, 0xB0, 0x8A, 0xA8, 0x96, 0x36, 0x56, 0x76, 0xF1, 0xB9, 0xAF, 0xB4, 0xB0, 0x83, 0xC0, 0xB8, 0xA8, 0x97, 0x11, 0xB1, 0x8F, 0x98, 0xB9, 0xAF, 0xF0, 0x24, 0x08, 0x44, 0x10, 0x64, 0x18, 0xF1, 0xA3, 0x29, 0x55, 0x7D, 0xAF, 0x83, 0xB5, 0x93, 0xAF, 0xF0, 0x00, 0x28, 0x50, 0xF1, 0xA3, 0x86, 0x9F, 0x61, 0xA6, 0xDA, 0xDE, 0xDF, 0xD9, 0xFA, 0xA3, 0x86, 0x96, 0xDB, 0x31, 0xA6, 0xD9, 0xF8, 0xDF, 0xBA, 0xA6, 0x8F, 0xC2, 0xC5, 0xC7, 0xB2, 0x8C, 0xC1, 0xB8, 0xA2, 0xDF, 0xDF, 0xDF, 0xA3, 0xDF, 0xDF, 0xDF, 0xD8, 0xD8, 0xF1, 0xB8, 0xA8, 0xB2, 0x86, // bank 4, 256 bytes 0xB4, 0x98, 0x0D, 0x35, 0x5D, 0xB8, 0xAA, 0x98, 0xB0, 0x87, 0x2D, 0x35, 0x3D, 0xB2, 0xB6, 0xBA, 0xAF, 0x8C, 0x96, 0x19, 0x8F, 0x9F, 0xA7, 0x0E, 0x16, 0x1E, 0xB4, 0x9A, 0xB8, 0xAA, 0x87, 0x2C, 0x54, 0x7C, 0xB9, 0xA3, 0xDE, 0xDF, 0xDF, 0xA3, 0xB1, 0x80, 0xF2, 0xC4, 0xCD, 0xC9, 0xF1, 0xB8, 0xA9, 0xB4, 0x99, 0x83, 0x0D, 0x35, 0x5D, 0x89, 0xB9, 0xA3, 0x2D, 0x55, 0x7D, 0xB5, 0x93, 0xA3, 0x0E, 0x16, 0x1E, 0xA9, 0x2C, 0x54, 0x7C, 0xB8, 0xB4, 0xB0, 0xF1, 0x97, 0x83, 0xA8, 0x11, 0x84, 0xA5, 0x09, 0x98, 0xA3, 0x83, 0xF0, 0xDA, 0x24, 0x08, 0x44, 0x10, 0x64, 0x18, 0xD8, 0xF1, 0xA5, 0x29, 0x55, 0x7D, 0xA5, 0x85, 0x95, 0x02, 0x1A, 0x2E, 0x3A, 0x56, 0x5A, 0x40, 0x48, 0xF9, 0xF3, 0xA3, 0xD9, 0xF8, 0xF0, 0x98, 0x83, 0x24, 0x08, 0x44, 0x10, 0x64, 0x18, 0x97, 0x82, 0xA8, 0xF1, 0x11, 0xF0, 0x98, 0xA2, 0x24, 0x08, 0x44, 0x10, 0x64, 0x18, 0xDA, 0xF3, 0xDE, 0xD8, 0x83, 0xA5, 0x94, 0x01, 0xD9, 0xA3, 0x02, 0xF1, 0xA2, 0xC3, 0xC5, 0xC7, 0xD8, 0xF1, 0x84, 0x92, 0xA2, 0x4D, 0xDA, 0x2A, 0xD8, 0x48, 0x69, 0xD9, 0x2A, 0xD8, 0x68, 0x55, 0xDA, 0x32, 0xD8, 0x50, 0x71, 0xD9, 0x32, 0xD8, 0x70, 0x5D, 0xDA, 0x3A, 0xD8, 0x58, 0x79, 0xD9, 0x3A, 0xD8, 0x78, 0x93, 0xA3, 0x4D, 0xDA, 0x2A, 0xD8, 0x48, 0x69, 0xD9, 0x2A, 0xD8, 0x68, 0x55, 0xDA, 0x32, 0xD8, 0x50, 0x71, 0xD9, 0x32, 0xD8, 0x70, 0x5D, 0xDA, 0x3A, 0xD8, 0x58, 0x79, 0xD9, 0x3A, 0xD8, 0x78, 0xA8, 0x8A, 0x9A, 0xF0, 0x28, 0x50, 0x78, 0x9E, 0xF3, 0x88, 0x18, 0xF1, 0x9F, 0x1D, 0x98, 0xA8, 0xD9, 0x08, 0xD8, 0xC8, 0x9F, 0x12, 0x9E, 0xF3, 0x15, 0xA8, 0xDA, 0x12, 0x10, 0xD8, 0xF1, 0xAF, 0xC8, 0x97, 0x87, // bank 5, 256 bytes 0x34, 0xB5, 0xB9, 0x94, 0xA4, 0x21, 0xF3, 0xD9, 0x22, 0xD8, 0xF2, 0x2D, 0xF3, 0xD9, 0x2A, 0xD8, 0xF2, 0x35, 0xF3, 0xD9, 0x32, 0xD8, 0x81, 0xA4, 0x60, 0x60, 0x61, 0xD9, 0x61, 0xD8, 0x6C, 0x68, 0x69, 0xD9, 0x69, 0xD8, 0x74, 0x70, 0x71, 0xD9, 0x71, 0xD8, 0xB1, 0xA3, 0x84, 0x19, 0x3D, 0x5D, 0xA3, 0x83, 0x1A, 0x3E, 0x5E, 0x93, 0x10, 0x30, 0x81, 0x10, 0x11, 0xB8, 0xB0, 0xAF, 0x8F, 0x94, 0xF2, 0xDA, 0x3E, 0xD8, 0xB4, 0x9A, 0xA8, 0x87, 0x29, 0xDA, 0xF8, 0xD8, 0x87, 0x9A, 0x35, 0xDA, 0xF8, 0xD8, 0x87, 0x9A, 0x3D, 0xDA, 0xF8, 0xD8, 0xB1, 0xB9, 0xA4, 0x98, 0x85, 0x02, 0x2E, 0x56, 0xA5, 0x81, 0x00, 0x0C, 0x14, 0xA3, 0x97, 0xB0, 0x8A, 0xF1, 0x2D, 0xD9, 0x28, 0xD8, 0x4D, 0xD9, 0x48, 0xD8, 0x6D, 0xD9, 0x68, 0xD8, 0xB1, 0x84, 0x0D, 0xDA, 0x0E, 0xD8, 0xA3, 0x29, 0x83, 0xDA, 0x2C, 0x0E, 0xD8, 0xA3, 0x84, 0x49, 0x83, 0xDA, 0x2C, 0x4C, 0x0E, 0xD8, 0xB8, 0xB0, 0xA8, 0x8A, 0x9A, 0xF5, 0x20, 0xAA, 0xDA, 0xDF, 0xD8, 0xA8, 0x40, 0xAA, 0xD0, 0xDA, 0xDE, 0xD8, 0xA8, 0x60, 0xAA, 0xDA, 0xD0, 0xDF, 0xD8, 0xF1, 0x97, 0x86, 0xA8, 0x31, 0x9B, 0x06, 0x99, 0x07, 0xAB, 0x97, 0x28, 0x88, 0x9B, 0xF0, 0x0C, 0x20, 0x14, 0x40, 0xB8, 0xB0, 0xB4, 0xA8, 0x8C, 0x9C, 0xF0, 0x04, 0x28, 0x51, 0x79, 0x1D, 0x30, 0x14, 0x38, 0xB2, 0x82, 0xAB, 0xD0, 0x98, 0x2C, 0x50, 0x50, 0x78, 0x78, 0x9B, 0xF1, 0x1A, 0xB0, 0xF0, 0x8A, 0x9C, 0xA8, 0x29, 0x51, 0x79, 0x8B, 0x29, 0x51, 0x79, 0x8A, 0x24, 0x70, 0x59, 0x8B, 0x20, 0x58, 0x71, 0x8A, 0x44, 0x69, 0x38, 0x8B, 0x39, 0x40, 0x68, 0x8A, 0x64, 0x48, 0x31, 0x8B, 0x30, 0x49, 0x60, 0xA5, 0x88, 0x20, 0x09, 0x71, 0x58, 0x44, 0x68, // bank 6, 256 bytes 0x11, 0x39, 0x64, 0x49, 0x30, 0x19, 0xF1, 0xAC, 0x00, 0x2C, 0x54, 0x7C, 0xF0, 0x8C, 0xA8, 0x04, 0x28, 0x50, 0x78, 0xF1, 0x88, 0x97, 0x26, 0xA8, 0x59, 0x98, 0xAC, 0x8C, 0x02, 0x26, 0x46, 0x66, 0xF0, 0x89, 0x9C, 0xA8, 0x29, 0x51, 0x79, 0x24, 0x70, 0x59, 0x44, 0x69, 0x38, 0x64, 0x48, 0x31, 0xA9, 0x88, 0x09, 0x20, 0x59, 0x70, 0xAB, 0x11, 0x38, 0x40, 0x69, 0xA8, 0x19, 0x31, 0x48, 0x60, 0x8C, 0xA8, 0x3C, 0x41, 0x5C, 0x20, 0x7C, 0x00, 0xF1, 0x87, 0x98, 0x19, 0x86, 0xA8, 0x6E, 0x76, 0x7E, 0xA9, 0x99, 0x88, 0x2D, 0x55, 0x7D, 0x9E, 0xB9, 0xA3, 0x8A, 0x22, 0x8A, 0x6E, 0x8A, 0x56, 0x8A, 0x5E, 0x9F, 0xB1, 0x83, 0x06, 0x26, 0x46, 0x66, 0x0E, 0x2E, 0x4E, 0x6E, 0x9D, 0xB8, 0xAD, 0x00, 0x2C, 0x54, 0x7C, 0xF2, 0xB1, 0x8C, 0xB4, 0x99, 0xB9, 0xA3, 0x2D, 0x55, 0x7D, 0x81, 0x91, 0xAC, 0x38, 0xAD, 0x3A, 0xB5, 0x83, 0x91, 0xAC, 0x2D, 0xD9, 0x28, 0xD8, 0x4D, 0xD9, 0x48, 0xD8, 0x6D, 0xD9, 0x68, 0xD8, 0x8C, 0x9D, 0xAE, 0x29, 0xD9, 0x04, 0xAE, 0xD8, 0x51, 0xD9, 0x04, 0xAE, 0xD8, 0x79, 0xD9, 0x04, 0xD8, 0x81, 0xF3, 0x9D, 0xAD, 0x00, 0x8D, 0xAE, 0x19, 0x81, 0xAD, 0xD9, 0x01, 0xD8, 0xF2, 0xAE, 0xDA, 0x26, 0xD8, 0x8E, 0x91, 0x29, 0x83, 0xA7, 0xD9, 0xAD, 0xAD, 0xAD, 0xAD, 0xF3, 0x2A, 0xD8, 0xD8, 0xF1, 0xB0, 0xAC, 0x89, 0x91, 0x3E, 0x5E, 0x76, 0xF3, 0xAC, 0x2E, 0x2E, 0xF1, 0xB1, 0x8C, 0x5A, 0x9C, 0xAC, 0x2C, 0x28, 0x28, 0x28, 0x9C, 0xAC, 0x30, 0x18, 0xA8, 0x98, 0x81, 0x28, 0x34, 0x3C, 0x97, 0x24, 0xA7, 0x28, 0x34, 0x3C, 0x9C, 0x24, 0xF2, 0xB0, 0x89, 0xAC, 0x91, 0x2C, 0x4C, 0x6C, 0x8A, 0x9B, 0x2D, 0xD9, 0xD8, 0xD8, 0x51, 0xD9, 0xD8, 0xD8, 0x79, // bank 7, 138 bytes (remainder) 0xD9, 0xD8, 0xD8, 0xF1, 0x9E, 0x88, 0xA3, 0x31, 0xDA, 0xD8, 0xD8, 0x91, 0x2D, 0xD9, 0x28, 0xD8, 0x4D, 0xD9, 0x48, 0xD8, 0x6D, 0xD9, 0x68, 0xD8, 0xB1, 0x83, 0x93, 0x35, 0x3D, 0x80, 0x25, 0xDA, 0xD8, 0xD8, 0x85, 0x69, 0xDA, 0xD8, 0xD8, 0xB4, 0x93, 0x81, 0xA3, 0x28, 0x34, 0x3C, 0xF3, 0xAB, 0x8B, 0xF8, 0xA3, 0x91, 0xB6, 0x09, 0xB4, 0xD9, 0xAB, 0xDE, 0xFA, 0xB0, 0x87, 0x9C, 0xB9, 0xA3, 0xDD, 0xF1, 0xA3, 0xA3, 0xA3, 0xA3, 0x95, 0xF1, 0xA3, 0xA3, 0xA3, 0x9D, 0xF1, 0xA3, 0xA3, 0xA3, 0xA3, 0xF2, 0xA3, 0xB4, 0x90, 0x80, 0xF2, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xB2, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xB0, 0x87, 0xB5, 0x99, 0xF1, 0xA3, 0xA3, 0xA3, 0x98, 0xF1, 0xA3, 0xA3, 0xA3, 0xA3, 0x97, 0xA3, 0xA3, 0xA3, 0xA3, 0xF3, 0x9B, 0xA3, 0xA3, 0xDC, 0xB9, 0xA7, 0xF1, 0x26, 0x26, 0x26, 0xD8, 0xD8, 0xFF }; // thanks to Noah Zerkin for piecing this stuff together! const unsigned char dmpConfig[MPU6050_DMP_CONFIG_SIZE] PROGMEM = { // BANK OFFSET LENGTH [DATA] 0x03, 0x7B, 0x03, 0x4C, 0xCD, 0x6C, // FCFG_1 inv_set_gyro_calibration 0x03, 0xAB, 0x03, 0x36, 0x56, 0x76, // FCFG_3 inv_set_gyro_calibration 0x00, 0x68, 0x04, 0x02, 0xCB, 0x47, 0xA2, // D_0_104 inv_set_gyro_calibration 0x02, 0x18, 0x04, 0x00, 0x05, 0x8B, 0xC1, // D_0_24 inv_set_gyro_calibration 0x01, 0x0C, 0x04, 0x00, 0x00, 0x00, 0x00, // D_1_152 inv_set_accel_calibration 0x03, 0x7F, 0x06, 0x0C, 0xC9, 0x2C, 0x97, 0x97, 0x97, // FCFG_2 inv_set_accel_calibration 0x03, 0x89, 0x03, 0x26, 0x46, 0x66, // FCFG_7 inv_set_accel_calibration 0x00, 0x6C, 0x02, 0x20, 0x00, // D_0_108 inv_set_accel_calibration 0x02, 0x40, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_00 inv_set_compass_calibration 0x02, 0x44, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_01 0x02, 0x48, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_02 0x02, 0x4C, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_10 0x02, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_11 0x02, 0x54, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_12 0x02, 0x58, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_20 0x02, 0x5C, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_21 0x02, 0xBC, 0x04, 0x00, 0x00, 0x00, 0x00, // CPASS_MTX_22 0x01, 0xEC, 0x04, 0x00, 0x00, 0x40, 0x00, // D_1_236 inv_apply_endian_accel 0x03, 0x7F, 0x06, 0x0C, 0xC9, 0x2C, 0x97, 0x97, 0x97, // FCFG_2 inv_set_mpu_sensors 0x04, 0x02, 0x03, 0x0D, 0x35, 0x5D, // CFG_MOTION_BIAS inv_turn_on_bias_from_no_motion 0x04, 0x09, 0x04, 0x87, 0x2D, 0x35, 0x3D, // FCFG_5 inv_set_bias_update 0x00, 0xA3, 0x01, 0x00, // D_0_163 inv_set_dead_zone // SPECIAL 0x01 = enable interrupts 0x00, 0x00, 0x00, 0x01, // SET INT_ENABLE at i=22, SPECIAL INSTRUCTION 0x07, 0x86, 0x01, 0xFE, // CFG_6 inv_set_fifo_interupt 0x07, 0x41, 0x05, 0xF1, 0x20, 0x28, 0x30, 0x38, // CFG_8 inv_send_quaternion 0x07, 0x7E, 0x01, 0x30, // CFG_16 inv_set_footer 0x07, 0x46, 0x01, 0x9A, // CFG_GYRO_SOURCE inv_send_gyro 0x07, 0x47, 0x04, 0xF1, 0x28, 0x30, 0x38, // CFG_9 inv_send_gyro -> inv_construct3_fifo 0x07, 0x6C, 0x04, 0xF1, 0x28, 0x30, 0x38, // CFG_12 inv_send_accel -> inv_construct3_fifo 0x02, 0x16, 0x02, 0x00, 0x01 // D_0_22 inv_set_fifo_rate // This very last 0x01 WAS a 0x09, which drops the FIFO rate down to 20 Hz. 0x07 is 25 Hz, // 0x01 is 100Hz. Going faster than 100Hz (0x00=200Hz) tends to result in very noisy data. // DMP output frequency is calculated easily using this equation: (200Hz / (1 + value)) // It is important to make sure the host processor can keep up with reading and processing // the FIFO output at the desired rate. Handling FIFO overflow cleanly is also a good idea. }; const unsigned char dmpUpdates[MPU6050_DMP_UPDATES_SIZE] PROGMEM = { 0x01, 0xB2, 0x02, 0xFF, 0xFF, 0x01, 0x90, 0x04, 0x09, 0x23, 0xA1, 0x35, 0x01, 0x6A, 0x02, 0x06, 0x00, 0x01, 0x60, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x04, 0x40, 0x00, 0x00, 0x00, 0x01, 0x62, 0x02, 0x00, 0x00, 0x00, 0x60, 0x04, 0x00, 0x40, 0x00, 0x00 }; uint8_t MPU6050::dmpInitialize() { // reset device DEBUG_PRINTLN(F("\n\nResetting MPU6050...")); reset(); //delay(30); // wait after reset wait_ms(30); // enable sleep mode and wake cycle /*Serial.println(F("Enabling sleep mode...")); setSleepEnabled(true); Serial.println(F("Enabling wake cycle...")); setWakeCycleEnabled(true);*/ // disable sleep mode DEBUG_PRINTLN(F("Disabling sleep mode...")); setSleepEnabled(false); // get MPU hardware revision DEBUG_PRINTLN(F("Selecting user bank 16...")); setMemoryBank(0x10, true, true); DEBUG_PRINTLN(F("Selecting memory byte 6...")); setMemoryStartAddress(0x06); DEBUG_PRINTLN(F("Checking hardware revision...")); uint8_t hwRevision = readMemoryByte(); DEBUG_PRINT(F("Revision @ user[16][6] = ")); DEBUG_PRINTLNF(hwRevision, HEX); DEBUG_PRINTLN(F("Resetting memory bank selection to 0...")); setMemoryBank(0, false, false); // check OTP bank valid DEBUG_PRINTLN(F("Reading OTP bank valid flag...")); uint8_t otpValid = getOTPBankValid(); DEBUG_PRINT(F("OTP bank is ")); DEBUG_PRINTLN((otpValid ? F("valid!") : F("invalid!"))); // get X/Y/Z gyro offsets DEBUG_PRINTLN(F("Reading gyro offset TC values...")); //int8_t xgOffsetTC = getXGyroOffsetTC(); //int8_t ygOffsetTC = getYGyroOffsetTC(); //int8_t zgOffsetTC = getZGyroOffsetTC(); //DEBUG_PRINT(F("X gyro offset = ")); //DEBUG_PRINTLN(xgOffset); //DEBUG_PRINT(F("Y gyro offset = ")); //DEBUG_PRINTLN(ygOffset); //DEBUG_PRINT(F("Z gyro offset = ")); //DEBUG_PRINTLN(zgOffset); // setup weird slave stuff (?) DEBUG_PRINTLN(F("Setting slave 0 address to 0x7F...")); setSlaveAddress(0, 0x7F); DEBUG_PRINTLN(F("Disabling I2C Master mode...")); setI2CMasterModeEnabled(false); DEBUG_PRINTLN(F("Setting slave 0 address to 0x68 (self)...")); setSlaveAddress(0, 0x68); DEBUG_PRINTLN(F("Resetting I2C Master control...")); resetI2CMaster(); //delay(20); wait_ms(20); // load DMP code into memory banks DEBUG_PRINT(F("Writing DMP code to MPU memory banks (")); DEBUG_PRINT(MPU6050_DMP_CODE_SIZE); DEBUG_PRINTLN(F(" bytes)")); if (writeProgMemoryBlock(dmpMemory, MPU6050_DMP_CODE_SIZE)) { DEBUG_PRINTLN(F("Success! DMP code written and verified.")); // write DMP configuration DEBUG_PRINT(F("Writing DMP configuration to MPU memory banks (")); DEBUG_PRINT(MPU6050_DMP_CONFIG_SIZE); DEBUG_PRINTLN(F(" bytes in config def)")); if (writeProgDMPConfigurationSet(dmpConfig, MPU6050_DMP_CONFIG_SIZE)) { DEBUG_PRINTLN(F("Success! DMP configuration written and verified.")); DEBUG_PRINTLN(F("Setting clock source to Z Gyro...")); setClockSource(MPU6050_CLOCK_PLL_ZGYRO); DEBUG_PRINTLN(F("Setting DMP and FIFO_OFLOW interrupts enabled...")); setIntEnabled(0x12); DEBUG_PRINTLN(F("Setting sample rate to 200Hz...")); setRate(4); // 1khz / (1 + 4) = 200 Hz DEBUG_PRINTLN(F("Setting external frame sync to TEMP_OUT_L[0]...")); setExternalFrameSync(MPU6050_EXT_SYNC_TEMP_OUT_L); DEBUG_PRINTLN(F("Setting DLPF bandwidth to 42Hz...")); setDLPFMode(MPU6050_DLPF_BW_42); DEBUG_PRINTLN(F("Setting gyro sensitivity to +/- 2000 deg/sec...")); setFullScaleGyroRange(MPU6050_GYRO_FS_2000); DEBUG_PRINTLN(F("Setting DMP configuration bytes (function unknown)...")); setDMPConfig1(0x03); setDMPConfig2(0x00); DEBUG_PRINTLN(F("Clearing OTP Bank flag...")); setOTPBankValid(false); DEBUG_PRINTLN(F("Setting X/Y/Z gyro offset TCs to previous values...")); //setXGyroOffsetTC(xgOffsetTC); //setYGyroOffsetTC(ygOffsetTC); //setZGyroOffsetTC(zgOffsetTC); //DEBUG_PRINTLN(F("Setting X/Y/Z gyro user offsets to zero...")); //setXGyroOffset(0); //setYGyroOffset(0); //setZGyroOffset(0); DEBUG_PRINTLN(F("Writing final memory update 1/7 (function unknown)...")); uint8_t dmpUpdate[16], j; uint16_t pos = 0; for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]); writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]); DEBUG_PRINTLN(F("Writing final memory update 2/7 (function unknown)...")); for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]); writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]); DEBUG_PRINTLN(F("Resetting FIFO...")); resetFIFO(); DEBUG_PRINTLN(F("Reading FIFO count...")); uint16_t fifoCount = getFIFOCount(); uint8_t fifoBuffer[128]; DEBUG_PRINT(F("Current FIFO count=")); DEBUG_PRINTLN(fifoCount); getFIFOBytes(fifoBuffer, fifoCount); DEBUG_PRINTLN(F("Setting motion detection threshold to 2...")); setMotionDetectionThreshold(2); DEBUG_PRINTLN(F("Setting zero-motion detection threshold to 156...")); setZeroMotionDetectionThreshold(156); DEBUG_PRINTLN(F("Setting motion detection duration to 80...")); setMotionDetectionDuration(80); DEBUG_PRINTLN(F("Setting zero-motion detection duration to 0...")); setZeroMotionDetectionDuration(0); DEBUG_PRINTLN(F("Resetting FIFO...")); resetFIFO(); DEBUG_PRINTLN(F("Enabling FIFO...")); setFIFOEnabled(true); DEBUG_PRINTLN(F("Enabling DMP...")); setDMPEnabled(true); DEBUG_PRINTLN(F("Resetting DMP...")); resetDMP(); DEBUG_PRINTLN(F("Writing final memory update 3/7 (function unknown)...")); for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]); writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]); DEBUG_PRINTLN(F("Writing final memory update 4/7 (function unknown)...")); for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]); writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]); DEBUG_PRINTLN(F("Writing final memory update 5/7 (function unknown)...")); for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]); writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]); DEBUG_PRINTLN(F("Waiting for FIFO count > 2...")); while ((fifoCount = getFIFOCount()) < 3); DEBUG_PRINT(F("Current FIFO count=")); DEBUG_PRINTLN(fifoCount); DEBUG_PRINTLN(F("Reading FIFO data...")); getFIFOBytes(fifoBuffer, fifoCount); DEBUG_PRINTLN(F("Reading interrupt status...")); uint8_t mpuIntStatus = getIntStatus(); DEBUG_PRINT(F("Current interrupt status=")); DEBUG_PRINTLNF(mpuIntStatus, HEX); DEBUG_PRINTLN(F("Reading final memory update 6/7 (function unknown)...")); for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]); readMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]); DEBUG_PRINTLN(F("Waiting for FIFO count > 2...")); while ((fifoCount = getFIFOCount()) < 3); DEBUG_PRINT(F("Current FIFO count=")); DEBUG_PRINTLN(fifoCount); DEBUG_PRINTLN(F("Reading FIFO data...")); getFIFOBytes(fifoBuffer, fifoCount); DEBUG_PRINTLN(F("Reading interrupt status...")); mpuIntStatus = getIntStatus(); DEBUG_PRINT(F("Current interrupt status=")); DEBUG_PRINTLNF(mpuIntStatus, HEX); DEBUG_PRINTLN(F("Writing final memory update 7/7 (function unknown)...")); for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]); writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]); DEBUG_PRINTLN(F("DMP is good to go! Finally.")); DEBUG_PRINTLN(F("Disabling DMP (you turn it on later)...")); setDMPEnabled(false); DEBUG_PRINTLN(F("Setting up internal 42-byte (default) DMP packet buffer...")); dmpPacketSize = 42; /*if ((dmpPacketBuffer = (uint8_t *)malloc(42)) == 0) { return 3; // TODO: proper error code for no memory }*/ DEBUG_PRINTLN(F("Resetting FIFO and clearing INT status one last time...")); resetFIFO(); getIntStatus(); } else { DEBUG_PRINTLN(F("ERROR! DMP configuration verification failed.")); return 2; // configuration block loading failed } } else { DEBUG_PRINTLN(F("ERROR! DMP code verification failed.")); return 1; // main binary block loading failed } return 0; // success } bool MPU6050::dmpPacketAvailable() { return getFIFOCount() >= dmpGetFIFOPacketSize(); } // uint8_t MPU6050::dmpSetFIFORate(uint8_t fifoRate); // uint8_t MPU6050::dmpGetFIFORate(); // uint8_t MPU6050::dmpGetSampleStepSizeMS(); // uint8_t MPU6050::dmpGetSampleFrequency(); // int32_t MPU6050::dmpDecodeTemperature(int8_t tempReg); //uint8_t MPU6050::dmpRegisterFIFORateProcess(inv_obj_func func, int16_t priority); //uint8_t MPU6050::dmpUnregisterFIFORateProcess(inv_obj_func func); //uint8_t MPU6050::dmpRunFIFORateProcesses(); // uint8_t MPU6050::dmpSendQuaternion(uint_fast16_t accuracy); // uint8_t MPU6050::dmpSendGyro(uint_fast16_t elements, uint_fast16_t accuracy); // uint8_t MPU6050::dmpSendAccel(uint_fast16_t elements, uint_fast16_t accuracy); // uint8_t MPU6050::dmpSendLinearAccel(uint_fast16_t elements, uint_fast16_t accuracy); // uint8_t MPU6050::dmpSendLinearAccelInWorld(uint_fast16_t elements, uint_fast16_t accuracy); // uint8_t MPU6050::dmpSendControlData(uint_fast16_t elements, uint_fast16_t accuracy); // uint8_t MPU6050::dmpSendSensorData(uint_fast16_t elements, uint_fast16_t accuracy); // uint8_t MPU6050::dmpSendExternalSensorData(uint_fast16_t elements, uint_fast16_t accuracy); // uint8_t MPU6050::dmpSendGravity(uint_fast16_t elements, uint_fast16_t accuracy); // uint8_t MPU6050::dmpSendPacketNumber(uint_fast16_t accuracy); // uint8_t MPU6050::dmpSendQuantizedAccel(uint_fast16_t elements, uint_fast16_t accuracy); // uint8_t MPU6050::dmpSendEIS(uint_fast16_t elements, uint_fast16_t accuracy); uint8_t MPU6050::dmpGetAccel(int32_t *data, const uint8_t* packet) { // TODO: accommodate different arrangements of sent data (ONLY default supported now) if (packet == 0) packet = dmpPacketBuffer; data[0] = ((packet[28] << 24) + (packet[29] << 16) + (packet[30] << 8) + packet[31]); data[1] = ((packet[32] << 24) + (packet[33] << 16) + (packet[34] << 8) + packet[35]); data[2] = ((packet[36] << 24) + (packet[37] << 16) + (packet[38] << 8) + packet[39]); return 0; } uint8_t MPU6050::dmpGetAccel(int16_t *data, const uint8_t* packet) { // TODO: accommodate different arrangements of sent data (ONLY default supported now) if (packet == 0) packet = dmpPacketBuffer; data[0] = (packet[28] << 8) + packet[29]; data[1] = (packet[32] << 8) + packet[33]; data[2] = (packet[36] << 8) + packet[37]; return 0; } uint8_t MPU6050::dmpGetAccel(VectorInt16 *v, const uint8_t* packet) { // TODO: accommodate different arrangements of sent data (ONLY default supported now) if (packet == 0) packet = dmpPacketBuffer; v -> x = (packet[28] << 8) + packet[29]; v -> y = (packet[32] << 8) + packet[33]; v -> z = (packet[36] << 8) + packet[37]; return 0; } uint8_t MPU6050::dmpGetQuaternion(int32_t *data, const uint8_t* packet) { // TODO: accommodate different arrangements of sent data (ONLY default supported now) if (packet == 0) packet = dmpPacketBuffer; data[0] = ((packet[0] << 24) + (packet[1] << 16) + (packet[2] << 8) + packet[3]); data[1] = ((packet[4] << 24) + (packet[5] << 16) + (packet[6] << 8) + packet[7]); data[2] = ((packet[8] << 24) + (packet[9] << 16) + (packet[10] << 8) + packet[11]); data[3] = ((packet[12] << 24) + (packet[13] << 16) + (packet[14] << 8) + packet[15]); return 0; } uint8_t MPU6050::dmpGetQuaternion(int16_t *data, const uint8_t* packet) { // TODO: accommodate different arrangements of sent data (ONLY default supported now) if (packet == 0) packet = dmpPacketBuffer; data[0] = ((packet[0] << 8) + packet[1]); data[1] = ((packet[4] << 8) + packet[5]); data[2] = ((packet[8] << 8) + packet[9]); data[3] = ((packet[12] << 8) + packet[13]); return 0; } uint8_t MPU6050::dmpGetQuaternion(Quaternion *q, const uint8_t* packet) { // TODO: accommodate different arrangements of sent data (ONLY default supported now) int16_t qI[4]; uint8_t status = dmpGetQuaternion(qI, packet); if (status == 0) { q -> w = (float)qI[0] / 16384.0f; q -> x = (float)qI[1] / 16384.0f; q -> y = (float)qI[2] / 16384.0f; q -> z = (float)qI[3] / 16384.0f; return 0; } return status; // int16 return value, indicates error if this line is reached } // uint8_t MPU6050::dmpGet6AxisQuaternion(long *data, const uint8_t* packet); // uint8_t MPU6050::dmpGetRelativeQuaternion(long *data, const uint8_t* packet); uint8_t MPU6050::dmpGetGyro(int32_t *data, const uint8_t* packet) { // TODO: accommodate different arrangements of sent data (ONLY default supported now) if (packet == 0) packet = dmpPacketBuffer; data[0] = ((packet[16] << 24) + (packet[17] << 16) + (packet[18] << 8) + packet[19]); data[1] = ((packet[20] << 24) + (packet[21] << 16) + (packet[22] << 8) + packet[23]); data[2] = ((packet[24] << 24) + (packet[25] << 16) + (packet[26] << 8) + packet[27]); return 0; } uint8_t MPU6050::dmpGetGyro(int16_t *data, const uint8_t* packet) { // TODO: accommodate different arrangements of sent data (ONLY default supported now) if (packet == 0) packet = dmpPacketBuffer; data[0] = (packet[16] << 8) + packet[17]; data[1] = (packet[20] << 8) + packet[21]; data[2] = (packet[24] << 8) + packet[25]; return 0; } // uint8_t MPU6050::dmpSetLinearAccelFilterCoefficient(float coef); // uint8_t MPU6050::dmpGetLinearAccel(long *data, const uint8_t* packet); uint8_t MPU6050::dmpGetLinearAccel(VectorInt16 *v, VectorInt16 *vRaw, VectorFloat *gravity) { // get rid of the gravity component (+1g = +8192 in standard DMP FIFO packet, sensitivity is 2g) v -> x = vRaw -> x - gravity -> x*8192; v -> y = vRaw -> y - gravity -> y*8192; v -> z = vRaw -> z - gravity -> z*8192; return 0; } // uint8_t MPU6050::dmpGetLinearAccelInWorld(long *data, const uint8_t* packet); uint8_t MPU6050::dmpGetLinearAccelInWorld(VectorInt16 *v, VectorInt16 *vReal, Quaternion *q) { // rotate measured 3D acceleration vector into original state // frame of reference based on orientation quaternion memcpy(v, vReal, sizeof(VectorInt16)); v -> rotate(q); return 0; } // uint8_t MPU6050::dmpGetGyroAndAccelSensor(long *data, const uint8_t* packet); // uint8_t MPU6050::dmpGetGyroSensor(long *data, const uint8_t* packet); // uint8_t MPU6050::dmpGetControlData(long *data, const uint8_t* packet); // uint8_t MPU6050::dmpGetTemperature(long *data, const uint8_t* packet); // uint8_t MPU6050::dmpGetGravity(long *data, const uint8_t* packet); uint8_t MPU6050::dmpGetGravity(VectorFloat *v, Quaternion *q) { v -> x = 2 * (q -> x*q -> z - q -> w*q -> y); v -> y = 2 * (q -> w*q -> x + q -> y*q -> z); v -> z = q -> w*q -> w - q -> x*q -> x - q -> y*q -> y + q -> z*q -> z; return 0; } // uint8_t MPU6050::dmpGetUnquantizedAccel(long *data, const uint8_t* packet); // uint8_t MPU6050::dmpGetQuantizedAccel(long *data, const uint8_t* packet); // uint8_t MPU6050::dmpGetExternalSensorData(long *data, int size, const uint8_t* packet); // uint8_t MPU6050::dmpGetEIS(long *data, const uint8_t* packet); uint8_t MPU6050::dmpGetEuler(float *data, Quaternion *q) { data[0] = atan2(2*q -> x*q -> y - 2*q -> w*q -> z, 2*q -> w*q -> w + 2*q -> x*q -> x - 1); // psi data[1] = -asin(2*q -> x*q -> z + 2*q -> w*q -> y); // theta data[2] = atan2(2*q -> y*q -> z - 2*q -> w*q -> x, 2*q -> w*q -> w + 2*q -> z*q -> z - 1); // phi return 0; } uint8_t MPU6050::dmpGetYawPitchRoll(float *data, Quaternion *q, VectorFloat *gravity) { // yaw: (about Z axis) data[0] = atan2(2*q -> x*q -> y - 2*q -> w*q -> z, 2*q -> w*q -> w + 2*q -> x*q -> x - 1); // pitch: (nose up/down, about Y axis) data[1] = atan(gravity -> x / sqrt(gravity -> y*gravity -> y + gravity -> z*gravity -> z)); // roll: (tilt left/right, about X axis) data[2] = atan(gravity -> y / sqrt(gravity -> x*gravity -> x + gravity -> z*gravity -> z)); return 0; } // uint8_t MPU6050::dmpGetAccelFloat(float *data, const uint8_t* packet); // uint8_t MPU6050::dmpGetQuaternionFloat(float *data, const uint8_t* packet); uint8_t MPU6050::dmpProcessFIFOPacket(const unsigned char *dmpData) { /*for (uint8_t k = 0; k < dmpPacketSize; k++) { if (dmpData[k] < 0x10) Serial.print("0"); Serial.print(dmpData[k], HEX); Serial.print(" "); } Serial.print("\n");*/ //Serial.println((uint16_t)dmpPacketBuffer); return 0; } uint8_t MPU6050::dmpReadAndProcessFIFOPacket(uint8_t numPackets, uint8_t *processed) { uint8_t status; uint8_t buf[dmpPacketSize]; for (uint8_t i = 0; i < numPackets; i++) { // read packet from FIFO getFIFOBytes(buf, dmpPacketSize); // process packet if ((status = dmpProcessFIFOPacket(buf)) > 0) return status; // increment external process count variable, if supplied if (processed != 0) *processed++; } return 0; } // uint8_t MPU6050::dmpSetFIFOProcessedCallback(void (*func) (void)); // uint8_t MPU6050::dmpInitFIFOParam(); // uint8_t MPU6050::dmpCloseFIFO(); // uint8_t MPU6050::dmpSetGyroDataSource(uint_fast8_t source); // uint8_t MPU6050::dmpDecodeQuantizedAccel(); // uint32_t MPU6050::dmpGetGyroSumOfSquare(); // uint32_t MPU6050::dmpGetAccelSumOfSquare(); // void MPU6050::dmpOverrideQuaternion(long *q); uint16_t MPU6050::dmpGetFIFOPacketSize() { return dmpPacketSize; } #endif /* _MPU6050_6AXIS_MOTIONAPPS20_H_ */